Clocksource tsc unstable

Hello,
I'm using Arch x86_64. After the last upgrade (installed xulrunner, preload and hunspell), my system got broken. When I boot, I get to the console, but then the keyboard stops working. I can switch consoles with no problem with Alt-Fx, but that's all, can't even reboot with Ctrl-Alt-Del. Also, the processor fan starts working hard, so it seems that my CPU is used much.
Fortunately, I've set up redirecting of system.log and other files to /dev/tty8. And the last message displayed is
Clocksource tsc unstable, delta=-...
I've googled and found that sometimes setting the kernel parameter
clocksource=acpi-pm
helps. Well, the message doesn't display now, but the system still hangs.
Thanks in advace for the help,
Przemek

I'm guessing that you have a dual core cpu. tsc stands for time stamp counter. This timer uses time stamps generated by the cpu to determine time. The problem is that both cores generate this timestamp and sometimes they are different. You could also try using clocksource=hpet.

Similar Messages

  • Optical drive, camera and bluetooth problems with Acer Aspire 7520

    Hello everyone
    First, my DVD drive just stopped working, it's not being recognized by Arch it seems. This has happened before a few times, but it suddenly started to work. I can open the tray manually, and when I insert a DVD, you can see the led blinking and drive does start to spin, but thats all. I've tried removing and reloading cdrom module with no success. Also, there was a /dev/sr0 before, now it's gone.
    Here is the output from dmesg:
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.34-ARCH (tobias@T-POWA-LX) (gcc version 4.5.0 20100610 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010
    Command line: root=/dev/disk/by-uuid/bc6d313b-0d53-423c-a845-a35031b4ffdb ro vga=773
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
    BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 0000000077f50000 (usable)
    BIOS-e820: 0000000077f50000 - 0000000077f65000 (ACPI data)
    BIOS-e820: 0000000077f65000 - 0000000077f66000 (ACPI NVS)
    BIOS-e820: 0000000077f66000 - 0000000080000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    NX (Execute Disable) protection: active
    DMI present.
    e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    No AGP bridge found
    last_pfn = 0x77f50 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-D3FFF write-protect
    D4000-E3FFF uncachable
    E4000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 0000000000 mask FF80000000 write-back
    1 disabled
    2 disabled
    3 disabled
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009e000 (usable)
    modified: 000000000009e000 - 00000000000a0000 (reserved)
    modified: 00000000000d2000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 0000000077f50000 (usable)
    modified: 0000000077f50000 - 0000000077f65000 (ACPI data)
    modified: 0000000077f65000 - 0000000077f66000 (ACPI NVS)
    modified: 0000000077f66000 - 0000000080000000 (reserved)
    modified: 00000000e0000000 - 00000000f0000000 (reserved)
    modified: 00000000fec00000 - 00000000fec10000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000fff80000 - 0000000100000000 (reserved)
    initial memory mapped : 0 - 20000000
    found SMP MP-table at [ffff8800000f7c90] f7c90
    init_memory_mapping: 0000000000000000-0000000077f50000
    0000000000 - 0077e00000 page 2M
    0077e00000 - 0077f50000 page 4k
    kernel direct mapping tables up to 77f50000 @ 16000-1a000
    RAMDISK: 37e5f000 - 37ff0000
    ACPI: RSDP 00000000000f7ca0 00024 (v02 ACRSYS)
    ACPI: XSDT 0000000077f5e339 0005C (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000)
    ACPI: SLIC 0000000077f64ace 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000)
    ACPI: FACP 0000000077f64c44 000F4 (v03 NVIDIA MCP67-M 06040000 PTL_ 000F4240)
    ACPI: DSDT 0000000077f5e395 066C5 (v01 NVIDIA MCP67 06040000 MSFT 03000000)
    ACPI: FACS 0000000077f65fc0 00040
    ACPI: SSDT 0000000077f64d38 001C4 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
    ACPI: MCFG 0000000077f64efc 0003C (v01 Nvidia NVDAACPI 06040000 NVDA 00000000)
    ACPI: HPET 0000000077f64f38 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
    ACPI: APIC 0000000077f64f70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    ACPI: BOOT 0000000077f64fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    ACPI: Local APIC address 0xfee00000
    [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal empty
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009e
    0: 0x00000100 -> 0x00077f50
    On node 0 totalpages: 491230
    DMA zone: 56 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3926 pages, LIFO batch:0
    DMA32 zone: 6662 pages used for memmap
    DMA32 zone: 480586 pages, LIFO batch:31
    Detected use of extended apic ids on hypertransport bus
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x10de8201 base: 0xfed00000
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 24
    early_res array is doubled to 64 at [18100 - 188ff]
    PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
    Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 29 pages/cpu @ffff880001800000 s88232 r8192 d22360 u1048576
    pcpu-alloc: s88232 r8192 d22360 u1048576 alloc=1*2097152
    pcpu-alloc: [0] 0 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 484512
    Kernel command line: root=/dev/disk/by-uuid/bc6d313b-0d53-423c-a845-a35031b4ffdb ro vga=773
    PID hash table entries: 4096 (order: 3, 32768 bytes)
    Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Checking aperture...
    No AGP bridge found
    Node 0: aperture @ 9960000000 size 32 MB
    Aperture beyond 4GB. Ignoring.
    Subtract (49 early reservations)
    #1 [0001000000 - 00016e1178] TEXT DATA BSS
    #2 [0037e5f000 - 0037ff0000] RAMDISK
    #3 [00016e2000 - 00016e20ed] BRK
    #4 [00000f7ca0 - 0000100000] BIOS reserved
    #5 [00000f7c90 - 00000f7ca0] MP-table mpf
    #6 [000009e000 - 000009e471] BIOS reserved
    #7 [000009e5c5 - 00000f7c90] BIOS reserved
    #8 [000009e471 - 000009e5c5] MP-table mpc
    #9 [0000010000 - 0000012000] TRAMPOLINE
    #10 [0000012000 - 0000016000] ACPI WAKEUP
    #11 [0000016000 - 0000018000] PGTABLE
    #12 [00016e2100 - 00016e3100] BOOTMEM
    #13 [0000018000 - 00000180f0] BOOTMEM
    #14 [0001ee4000 - 0001ee5000] BOOTMEM
    #15 [0001ee5000 - 0001ee6000] BOOTMEM
    #16 [0002000000 - 0003c00000] MEMMAP 0
    #17 [00016e3100 - 00016fb100] BOOTMEM
    #18 [00016fb100 - 0001713100] BOOTMEM
    #19 [0001714000 - 0001715000] BOOTMEM
    #20 [00016e1180 - 00016e11c1] BOOTMEM
    #21 [00016e1200 - 00016e1243] BOOTMEM
    #22 [00016e1280 - 00016e1520] BOOTMEM
    #23 [00016e1540 - 00016e15a8] BOOTMEM
    #24 [00016e15c0 - 00016e1628] BOOTMEM
    #25 [00016e1640 - 00016e16a8] BOOTMEM
    #26 [00016e16c0 - 00016e1728] BOOTMEM
    #27 [00016e1740 - 00016e17a8] BOOTMEM
    #28 [00016e17c0 - 00016e1828] BOOTMEM
    #29 [00016e1840 - 00016e18a8] BOOTMEM
    #30 [00016e18c0 - 00016e1928] BOOTMEM
    #31 [00016e1940 - 00016e19a8] BOOTMEM
    #32 [00016e19c0 - 00016e1a28] BOOTMEM
    #33 [00016e1a40 - 00016e1aa8] BOOTMEM
    #34 [00016e1ac0 - 00016e1ae0] BOOTMEM
    #35 [00016e1b00 - 00016e1b47] BOOTMEM
    #36 [00016e1b80 - 00016e1bc7] BOOTMEM
    #37 [0001800000 - 000181d000] BOOTMEM
    #38 [0001900000 - 000191d000] BOOTMEM
    #39 [00016e1c00 - 00016e1c08] BOOTMEM
    #40 [00016e1c40 - 00016e1c48] BOOTMEM
    #41 [00016e1c80 - 00016e1c88] BOOTMEM
    #42 [00016e1cc0 - 00016e1cd0] BOOTMEM
    #43 [00016e1d00 - 00016e1e40] BOOTMEM
    #44 [00016e1e40 - 00016e1ea0] BOOTMEM
    #45 [00016e1ec0 - 00016e1f20] BOOTMEM
    #46 [0001715000 - 000171d000] BOOTMEM
    #47 [000191d000 - 0001b1d000] BOOTMEM
    #48 [0001b1d000 - 0001c1d000] BOOTMEM
    Memory: 1924012k/1965376k available (3484k kernel code, 456k absent, 40908k reserved, 1796k data, 480k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Hierarchical RCU implementation.
    NR_IRQS:768
    Extended CMOS year: 2000
    spurious 8259A interrupt: IRQ7.
    Console: colour dummy device 80x25
    console [tty0] enabled
    allocated 19660800 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    hpet clockevent registered
    Fast TSC calibration using PIT
    Detected 1800.462 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3602.96 BogoMIPS (lpj=6001540)
    Security Framework initialized
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    tseg: 0077f80000
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 5 MCE banks
    using C1E aware idle routine
    Performance Events: AMD PMU driver.
    ... version: 0
    ... bit width: 48
    ... generic registers: 4
    ... value mask: 0000ffffffffffff
    ... max period: 00007fffffffffff
    ... fixed-purpose events: 0
    ... event mask: 000000000000000f
    ACPI: Core revision 20100121
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 stepping 01
    System has AMD C1E enabled
    Switch to broadcast mode on CPU0
    Booting Node 0, Processors #1 Ok.
    Switch to broadcast mode on CPU1
    Brought up 2 CPUs
    Total of 2 processors activated (7204.45 BogoMIPS).
    devtmpfs: initialized
    NET: Registered protocol family 16
    node 0 link 0: io port [1000, fffff]
    TOM: 0000000080000000 aka 2048M
    node 0 link 0: mmio [a0000, bffff]
    node 0 link 0: mmio [80000000, dfffffff]
    node 0 link 0: mmio [e0000000, efffffff]
    node 0 link 0: mmio [f0000000, fe0bffff]
    bus: [00, ff] on node 0 link 0
    bus: 00 index 0 [io 0x0000-0xffff]
    bus: 00 index 1 [mem 0x000a0000-0x000bffff]
    bus: 00 index 2 [mem 0x80000000-0xfcffffffff]
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
    pci 0000:00:01.0: reg 10: [io 0x1d00-0x1dff]
    pci 0000:00:01.1: reg 10: [io 0x3080-0x30bf]
    pci 0000:00:01.1: reg 20: [io 0x3040-0x307f]
    pci 0000:00:01.1: reg 24: [io 0x3000-0x303f]
    pci 0000:00:01.1: PME# supported from D3hot D3cold
    pci 0000:00:01.1: PME# disabled
    pci 0000:00:01.3: reg 10: [mem 0xf2400000-0xf247ffff]
    pci 0000:00:02.0: reg 10: [mem 0xf2686000-0xf2686fff]
    pci 0000:00:02.0: supports D1 D2
    pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.0: PME# disabled
    pci 0000:00:02.1: reg 10: [mem 0xf2689000-0xf26890ff]
    pci 0000:00:02.1: supports D1 D2
    pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.1: PME# disabled
    pci 0000:00:04.0: reg 10: [mem 0xf2687000-0xf2687fff]
    pci 0000:00:04.0: supports D1 D2
    pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:04.0: PME# disabled
    pci 0000:00:04.1: reg 10: [mem 0xf2689400-0xf26894ff]
    pci 0000:00:04.1: supports D1 D2
    pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:04.1: PME# disabled
    pci 0000:00:07.0: reg 10: [mem 0xf2680000-0xf2683fff]
    pci 0000:00:07.0: PME# supported from D3hot D3cold
    pci 0000:00:07.0: PME# disabled
    pci 0000:00:09.0: reg 10: [io 0x30f0-0x30f7]
    pci 0000:00:09.0: reg 14: [io 0x30e4-0x30e7]
    pci 0000:00:09.0: reg 18: [io 0x30e8-0x30ef]
    pci 0000:00:09.0: reg 1c: [io 0x30e0-0x30e3]
    pci 0000:00:09.0: reg 20: [io 0x30d0-0x30df]
    pci 0000:00:09.0: reg 24: [mem 0xf2684000-0xf2685fff]
    pci 0000:00:0a.0: reg 10: [mem 0xf2688000-0xf2688fff]
    pci 0000:00:0a.0: reg 14: [io 0x30f8-0x30ff]
    pci 0000:00:0a.0: reg 18: [mem 0xf2689c00-0xf2689cff]
    pci 0000:00:0a.0: reg 1c: [mem 0xf2689800-0xf268980f]
    pci 0000:00:0a.0: supports D1 D2
    pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:0a.0: PME# disabled
    pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:0c.0: PME# disabled
    pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:0d.0: PME# disabled
    pci 0000:00:12.0: reg 10: [mem 0xf1000000-0xf1ffffff]
    pci 0000:00:12.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:00:12.0: reg 1c: [mem 0xf0000000-0xf0ffffff 64bit]
    pci 0000:00:12.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    PCI: peer root bus 00 res updated from pci conf
    pci 0000:01:04.0: proprietary Ricoh MMC controller disabled (via firewire function)
    pci 0000:01:04.0: MMC cards are now supported by standard SDHCI controller
    pci 0000:01:04.0: reg 10: [mem 0xf2300000-0xf23007ff]
    pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
    pci 0000:01:04.0: PME# disabled
    pci 0000:01:04.1: reg 10: [mem 0xf2300800-0xf23008ff]
    pci 0000:01:04.1: supports D1 D2
    pci 0000:01:04.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:04.1: PME# disabled
    pci 0000:01:04.2: reg 10: [mem 0xf2301000-0xf23010ff]
    pci 0000:01:04.2: supports D1 D2
    pci 0000:01:04.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:04.2: PME# disabled
    pci 0000:01:04.3: reg 10: [mem 0xf2301400-0xf23014ff]
    pci 0000:01:04.3: supports D1 D2
    pci 0000:01:04.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:04.3: PME# disabled
    pci 0000:00:08.0: PCI bridge to [bus 01-01] (subtractive decode)
    pci 0000:00:08.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:08.0: bridge window [mem 0xf2300000-0xf23fffff]
    pci 0000:00:08.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:08.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    pci 0000:00:08.0: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode)
    pci 0000:00:0c.0: PCI bridge to [bus 03-04]
    pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
    pci 0000:00:0c.0: bridge window [mem 0xf2000000-0xf21fffff]
    pci 0000:00:0c.0: bridge window [mem 0xf2800000-0xf29fffff 64bit pref]
    pci 0000:05:00.0: reg 10: [mem 0xf2200000-0xf220ffff 64bit]
    pci 0000:00:0d.0: PCI bridge to [bus 05-05]
    pci 0000:00:0d.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:0d.0: bridge window [mem 0xf2200000-0xf22fffff]
    pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
    ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 11) *10
    ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *11)
    ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 11) *0, disabled.
    ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
    ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
    ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
    ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10
    ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *7
    ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LGPU] (IRQs 17) *10
    ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LSI0] (IRQs 20 21 22 23) *5
    ACPI: PCI Interrupt Link [Z00N] (IRQs 20 21 22 23) *10
    ACPI: PCI Interrupt Link [Z00O] (IRQs 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11
    vgaarb: device added: PCI:0000:00:12.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    reserve RAM buffer: 000000000009e000 - 000000000009ffff
    reserve RAM buffer: 0000000077f50000 - 0000000077ffffff
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
    hpet0: 3 comparators, 32-bit 25.000000 MHz counter
    Switching to clocksource hpet
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 13 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: [io 0x0360-0x0361] has been reserved
    system 00:01: [io 0x04d0-0x04d1] has been reserved
    system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
    system 00:0a: [io 0x1000-0x107f] has been reserved
    system 00:0a: [io 0x1080-0x10ff] has been reserved
    system 00:0a: [io 0x1400-0x147f] has been reserved
    system 00:0a: [io 0x1480-0x14ff] has been reserved
    system 00:0a: [io 0x1800-0x187f] has been reserved
    system 00:0a: [io 0x1880-0x18ff] has been reserved
    system 00:0c: [mem 0xffc00000-0xffffffff] could not be reserved
    system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
    system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
    system 00:0c: [mem 0xfed00000-0xfed00fff] has been reserved
    system 00:0c: [mem 0xfef00000-0xfef00fff] has been reserved
    pci 0000:00:12.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
    pci 0000:00:08.0: PCI bridge to [bus 01-01]
    pci 0000:00:08.0: bridge window [io disabled]
    pci 0000:00:08.0: bridge window [mem 0xf2300000-0xf23fffff]
    pci 0000:00:08.0: bridge window [mem pref disabled]
    pci 0000:00:0c.0: PCI bridge to [bus 03-04]
    pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
    pci 0000:00:0c.0: bridge window [mem 0xf2000000-0xf21fffff]
    pci 0000:00:0c.0: bridge window [mem 0xf2800000-0xf29fffff 64bit pref]
    pci 0000:00:0d.0: PCI bridge to [bus 05-05]
    pci 0000:00:0d.0: bridge window [io disabled]
    pci 0000:00:0d.0: bridge window [mem 0xf2200000-0xf22fffff]
    pci 0000:00:0d.0: bridge window [mem pref disabled]
    pci 0000:00:08.0: setting latency timer to 64
    pci 0000:00:0c.0: setting latency timer to 64
    pci 0000:00:0d.0: setting latency timer to 64
    pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffffff]
    pci_bus 0000:01: resource 1 [mem 0xf2300000-0xf23fffff]
    pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
    pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:01: resource 6 [mem 0x80000000-0xfcffffffff]
    pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
    pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf21fffff]
    pci_bus 0000:03: resource 2 [mem 0xf2800000-0xf29fffff 64bit pref]
    pci_bus 0000:05: resource 1 [mem 0xf2200000-0xf22fffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    UDP hash table entries: 1024 (order: 3, 32768 bytes)
    UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    NET: Registered protocol family 1
    pci 0000:00:00.0: Found enabled HT MSI Mapping
    pci 0000:00:00.0: Found enabled HT MSI Mapping
    pci 0000:00:00.0: Found enabled HT MSI Mapping
    pci 0000:00:00.0: Found enabled HT MSI Mapping
    pci 0000:00:00.0: Found enabled HT MSI Mapping
    pci 0000:00:00.0: Found enabled HT MSI Mapping
    pci 0000:00:12.0: Boot video device
    PCI: CLS 64 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 1604k freed
    Simple Boot Flag at 0x36 set to 0x1
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1280047128.390:1): initialized
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 3760
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pcieport 0000:00:0c.0: setting latency timer to 64
    pcieport 0000:00:0c.0: irq 24 for MSI/MSI-X
    pcieport 0000:00:0d.0: setting latency timer to 64
    pcieport 0000:00:0d.0: irq 25 for MSI/MSI-X
    pcieport 0000:00:0c.0: Requesting control of PCIe PME from ACPI BIOS
    Firmware did not grant requested _OSC control
    pcieport 0000:00:0c.0: Failed to receive control of PCIe PME service: no _OSC support
    pcie_pme: probe of 0000:00:0c.0:pcie01 failed with error -13
    pcieport 0000:00:0d.0: Requesting control of PCIe PME from ACPI BIOS
    Firmware did not grant requested _OSC control
    pcieport 0000:00:0d.0: Failed to receive control of PCIe PME service: no _OSC support
    pcie_pme: probe of 0000:00:0d.0:pcie01 failed with error -13
    vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010100000, using 1536k, total 131072k
    vesafb: mode is 1024x768x8, linelength=1024, pages=3
    vesafb: scrolling: redraw
    vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    PM: Resume from disk failed.
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 480k freed
    udev: starting version 158
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:00:09.0: version 3.0
    ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
    ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23
    ahci 0000:00:09.0: irq 26 for MSI/MSI-X
    ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ
    ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
    ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio slum part
    ahci 0000:00:09.0: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    ata1: SATA max UDMA/133 abar m8192@0xf2684000 port 0xf2684100 irq 26
    ata2: SATA max UDMA/133 abar m8192@0xf2684000 port 0xf2684180 irq 26
    ata3: SATA max UDMA/133 abar m8192@0xf2684000 port 0xf2684200 irq 26
    ata4: SATA max UDMA/133 abar m8192@0xf2684000 port 0xf2684280 irq 26
    ata2: SATA link down (SStatus 0 SControl 300)
    ata4: SATA link down (SStatus 0 SControl 300)
    ata3: SATA link down (SStatus 0 SControl 300)
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-7: WDC WD1600BEVS-22RST0, 04.01G04, max UDMA/133
    ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-2 04.0 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3
    sd 0:0:0:0: [sda] Attached SCSI disk
    EXT4-fs (sda1): mounted filesystem with ordered data mode
    rtc_cmos 00:04: RTC can wake from S4
    rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
    udev: starting version 159
    fuse init (API version 7.13)
    forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
    ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
    forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
    forcedeth 0000:00:0a.0: setting latency timer to 64
    ACPI: Invalid active0 threshold
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THRM] (34 C)
    ACPI: WMI: Skipping duplicate GUID 05901221-D566-11D1-B2F0-00A0C9062910
    [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
    input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1
    ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
    ACPI: WMI: Mapper loaded
    input: PC Speaker as /devices/platform/pcspkr/input/input2
    forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:38:4e:9e:40
    forcedeth 0000:00:0a.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
    k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
    vboxdrv: Trying to deactivate the NMI watchdog permanently...
    vboxdrv: Successfully done.
    vboxdrv: Found 2 processor cores.
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    VBoxDrv: dbg - g_abExecMemory=ffffffffa01f2560
    vboxdrv: fAsync=1 offMin=0x4e21e offMax=0x4e21e
    vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
    vboxdrv: Successfully loaded version 3.2.0 (interface 0x00140001).
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    lirc_dev: IR Remote Control driver registered, major 61
    i2c i2c-0: nForce2 SMBus adapter at 0x3040
    i2c i2c-1: nForce2 SMBus adapter at 0x3000
    input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
    ACPI: EC: GPE storm detected, transactions will use polling mode
    EDAC MC: Ver: 2.1.0 Jul 5 2010
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
    ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 21 (level, low) -> IRQ 21
    ehci_hcd 0000:00:02.1: setting latency timer to 64
    ehci_hcd 0000:00:02.1: EHCI Host Controller
    ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:02.1: debug port 1
    ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
    ehci_hcd 0000:00:02.1: irq 21, io mem 0xf2689000
    ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
    ACPI: Lid Switch [LID]
    input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
    ACPI: Sleep Button [SLPB]
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
    ACPI: Power Button [PWRB]
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
    ACPI: Power Button [PWRF]
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 5 ports detected
    ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 20
    ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z00O] -> GSI 20 (level, low) -> IRQ 20
    ehci_hcd 0000:00:04.1: setting latency timer to 64
    ehci_hcd 0000:00:04.1: EHCI Host Controller
    ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:04.1: debug port 1
    ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
    ehci_hcd 0000:00:04.1: irq 20, io mem 0xf2689400
    lirc_dev: lirc_register_driver: sample_rate: 0
    enecir: KB3926B detected
    enecir: chip is 0x3909 - 0x24, 0xc0
    enecir: driver has been succesfully loaded
    ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 5 ports detected
    ACPI: AC Adapter [ACAD] (off-line)
    ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
    firewire_ohci 0000:01:04.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
    firewire_ohci: Added fw-ohci device 0000:01:04.0, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x0
    usb 1-3: new high speed USB device using ehci_hcd and address 2
    hub 1-0:1.0: unable to enumerate USB device on port 3
    ACPI: Battery Slot [BAT1] (battery present)
    nvidia: module license 'NVIDIA' taints kernel.
    Disabling lock debugging due to kernel taint
    firewire_core: created device fw0: GUID 00023f78c5006d9b, S400
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
    ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 23 (level, low) -> IRQ 23
    ohci_hcd 0000:00:02.0: setting latency timer to 64
    ohci_hcd 0000:00:02.0: OHCI Host Controller
    ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
    ohci_hcd 0000:00:02.0: irq 23, io mem 0xf2686000
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 5 ports detected
    ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 22
    ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z00N] -> GSI 22 (level, low) -> IRQ 22
    ohci_hcd 0000:00:04.0: setting latency timer to 64
    ohci_hcd 0000:00:04.0: OHCI Host Controller
    ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
    ohci_hcd 0000:00:04.0: irq 22, io mem 0xf2687000
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 5 ports detected
    EDAC amd64_edac: Ver: 3.3.0 Jul 5 2010
    EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
    EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    (Note that use of the override may cause unknown side effects.)
    amd64_edac: probe of 0000:00:18.2 failed with error -22
    cfg80211: Calling CRDA to update world regulatory domain
    ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 17
    nvidia 0000:00:12.0: PCI INT A -> Link[LGPU] -> GSI 17 (level, low) -> IRQ 17
    nvidia 0000:00:12.0: setting latency timer to 64
    vgaarb: device changed decodes: PCI:0000:00:12.0,olddecodes=io+mem,decodes=none:owns=io+mem
    NVRM: loading NVIDIA UNIX x86_64 Kernel Module 256.35 Wed Jun 16 18:42:44 PDT 2010
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pci 0000:01:04.1: SDHCI controller found [1180:0822] (rev 22)
    ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
    sdhci-pci 0000:01:04.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11
    sdhci-pci 0000:01:04.1: Will use DMA mode even though HW doesn't fully claim to support it.
    Registered led device: mmc0::
    mmc0: SDHCI controller on PCI [0000:01:04.1] using DMA
    usb 3-3: new full speed USB device using ohci_hcd and address 2
    ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
    ath5k 0000:05:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low) -> IRQ 19
    ath5k 0000:05:00.0: setting latency timer to 64
    ath5k 0000:05:00.0: registered as 'phy0'
    usb 3-3: not running at top speed; connect to a high speed hub
    ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
    HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
    hda_intel: Disable MSI for Nvidia chipset
    HDA Intel 0000:00:07.0: setting latency timer to 64
    Linux video capture interface: v2.00
    input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7
    uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101)
    input: Acer CrystalEye webcam as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input8
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9
    ath: EEPROM regdomain: 0x65
    ath: EEPROM indicates we should expect a direct regpair map
    ath: Country alpha2 being used: 00
    ath: Regpair used: 0x65
    phy0: Selected rate control algorithm 'minstrel'
    Registered led device: ath5k-phy0::rx
    Registered led device: ath5k-phy0::tx
    ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input10
    ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20100121/evregion-474)
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.ECOK] (Node ffff88007781ffc0), AE_TIME
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.ACAD._PSR] (Node ffff8800778259e0), AE_TIME
    ACPI Exception: AE_TIME, Error reading AC Adapter state (20100121/ac-141)
    EXT4-fs (sda2): mounted filesystem with ordered data mode
    Adding 2152704k swap on /dev/sda3. Priority:-1 extents:1 across:2152704k
    forcedeth 0000:00:0a.0: irq 27 for MSI/MSI-X
    eth0: no link during initialization.
    Clocksource tsc unstable (delta = 4398046404009 ns)
    ata1.00: configured for UDMA/133
    ata1: EH complete
    sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    nvclock:2261 freeing invalid memtype f1000000-f1010000
    nvclock:2261 freeing invalid memtype f1010000-f1030000
    wlan0: Trigger new scan to find an IBSS to join
    wlan0: Trigger new scan to find an IBSS to join
    wlan0: Trigger new scan to find an IBSS to join
    wlan0: Creating new IBSS network, BSSID b2:0a:28:21:7c:ac
    ip_tables: (C) 2000-2006 Netfilter Core Team
    nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
    nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
    sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
    wlan0: deauthenticating from 00:1e:e5:45:bf:58 by local choice (reason=3)
    wlan0: authenticate with 00:1e:e5:45:bf:58 (try 1)
    wlan0: authenticated
    wlan0: associate with 00:1e:e5:45:bf:58 (try 1)
    wlan0: RX AssocResp from 00:1e:e5:45:bf:58 (capab=0x411 status=0 aid=1)
    wlan0: associated
    Intel AES-NI instructions are not detected.
    padlock: VIA PadLock not detected.
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    wlan0: no IPv6 routers present
    CE: hpet increased min_delta_ns to 7500 nsec
    ata1.00: configured for UDMA/133
    ata1: EH complete
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Now, the camera issue is a bit different. It worked before with no problems. But now, when I start guvcview, it opens it's main window, and a second window that usually show picture from camera, just appears for a moment and disappears. The led next to my camera turns on, and stays that way. Also, yesterday when I was trying to test the camera, guvcview stuck in a uninteruptible state, so I couldn't kill him in any way. Even after I close guvcview, the camera led is still on, but he is not among active processes. Although in the guvcview output below it says that the device is in use, I don't know how, because I rebooted my laptop and then I tried to run it.
    This is what guvcview outputs in console after I start and then close it:
    guvcview 1.3.0
    video device: /dev/video0
    /dev/video0 - device 1
    Init. Acer CrystalEye webcam (location: usb-0000:00:02.0-3)
    { pixelformat = 'MJPG', description = 'MJPEG' }
    { discrete: width = 640, height = 480 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 352, height = 288 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 320, height = 240 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 176, height = 144 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 160, height = 120 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { pixelformat = 'RGB3', description = 'RGB3' }
    { discrete: width = 640, height = 480 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 352, height = 288 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 320, height = 240 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 176, height = 144 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 160, height = 120 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { pixelformat = 'BGR3', description = 'BGR3' }
    { discrete: width = 640, height = 480 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 352, height = 288 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 320, height = 240 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 176, height = 144 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 160, height = 120 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { pixelformat = 'YU12', description = 'YU12' }
    { discrete: width = 640, height = 480 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 352, height = 288 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 320, height = 240 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 176, height = 144 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 160, height = 120 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { pixelformat = 'YV12', description = 'YV12' }
    { discrete: width = 640, height = 480 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 352, height = 288 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 320, height = 240 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 176, height = 144 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    { discrete: width = 160, height = 120 }
    Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, 1/1,
    vid:064e
    pid:a101
    driver:uvcvideo
    checking format: 1196444237
    VIDIOC_G_COMP:: Invalid argument
    compression control not supported
    fps is set to 1/30
    V4L2_CTRL_FLAG_NEXT_CTRL supported
    libv4l2: error turning on stream: Timer expired
    VIDIOC_STREAMON - Unable to start capture: Timer expired
    fps is set to 1/30
    libv4l2: error turning on stream: Device or resource busy
    VIDIOC_STREAMON - Unable to start capture: Device or resource busy
    libv4l2: error turning on stream: Device or resource busy
    VIDIOC_STREAMON - Unable to start capture: Device or resource busy
    write /home/amar/.guvcviewrc OK
    free controls
    cleaned allocations - 100%
    Closing portaudio ...OK
    Closing GTK... OK
    For the bluetooth, I really never managed to get it working. The bluetooth daemons starts with no problems, but hcitool dev shows no devices. I read the wiki, and the only thing I didn't try is the hid2hci tool, I couldn't figure out what to use for devpath argument.
    Thanks.

    for DVD:
    which DE you use ?
    post your
    /etc/fstab

  • PCI slot in Thinkpad Dock II unusable

    Hello, I have a Thinkpad a22m 2628-S1U which can be used with the Thinkpad Dock II. To avoid feeling tempted to buy a new laptop I bought that dock as well as an ATI Radeon x1550 to put in its PCI slot. These items were said to be compatible on http://thinkwiki.org the Linux thinkpad wiki.
    Now that I've tried it out, I'm starting to think the contributors to that site were windows users who didn't read the topic. Starting up docked gave the following lspci output (notice there's no radeon card):
    00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
    00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
    00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
    00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
    00:03.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09)
    00:03.1 Serial controller: Xircom Mini-PCI V.90 56k Modem
    00:04.0 PCI bridge: Texas Instruments PCI2032 PCI Docking Bridge
    00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
    00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
    00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
    00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
    00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
    01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02)
    08:01.0 IDE interface: Silicon Image, Inc. PCI0648 (rev 01)
    08:02.0 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
    08:02.1 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
    0f:00.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
    For comparison, here's what my lspci looks like undocked:
    00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
    00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
    00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
    00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
    00:03.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09)
    00:03.1 Serial controller: Xircom Mini-PCI V.90 56k Modem
    00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
    00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
    00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
    00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
    00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
    01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02)
    02:00.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
    So a few parts of the dock are getting detected but not the most important parts. The error that I think is related to the absence of the graphics card appears in dmesg. Look for the part about "cannot allocate resource region":
    Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008
    PAT disabled. Not yet verified on this CPU type.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
    BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    Entering add_active_range(0, 0, 131056) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 131056
    HighMem 131056 -> 131056
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 131056
    On node 0 totalpages: 131056
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 992 pages used for memmap
    Normal zone: 125968 pages, LIFO batch:31
    HighMem zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    DMI 2.3 present.
    ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
    ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
    ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
    ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
    ACPI: FACS 1FFFF000, 0040
    ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
    ACPI: PM-Timer IO Port: 0x1008
    Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    SMP: Allowing 0 CPUs, 0 hotplug CPUs
    PERCPU: Allocating 39464 bytes of per cpu data
    NR_CPUS: 16, nr_cpu_ids: 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130032
    Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
    ACPI: Added _OSI(Linux)
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffb000 (0140e000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    Detected 697.417 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 514452k/524224k available (2120k kernel code, 9264k reserved, 744k data, 264k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee4000 - 0xfffff000 (1132 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
    lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
    .init : 0xc03d3000 - 0xc0415000 ( 264 kB)
    .data : 0xc031225e - 0xc03cc380 ( 744 kB)
    .text : 0xc0100000 - 0xc031225e (2120 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay using timer specific routine.. 973.82 BogoMIPS (lpj=1622127)
    Security Framework initialized
    Capability LSM initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20080321
    ACPI: Checking initramfs for custom DSDT
    ACPI: setting ELCR to 0200 (from 0e80)
    weird, boot CPU (#0) not listedby the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (973.82 BogoMIPS).
    net_namespace: 652 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=14
    PCI: Using configuration type 1 for base access
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
    pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
    pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
    pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
    pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
    PCI: Transparent bridge - 0000:00:04.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DOCK._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11)
    ACPI: Power Resource [PSER] (off)
    ACPI: Power Resource [PSIO] (on)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
    PCI: setting IRQ 9 as level-triggered
    ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
    PCI: setting IRQ 7 as level-triggered
    ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt 0000:08:01.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt 0000:08:02.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI Interrupt 0000:08:02.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
    PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
    PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
    system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x103f has been reserved
    system 00:02: ioport range 0x1040-0x104f has been reserved
    system 00:02: ioport range 0xfe00-0xfe0f has been reserved
    system 00:09: ioport range 0x15e0-0x15ef has been reserved
    PCI: region 0000:08:02.0/9 too large: 0x0000000000000000-0x0000000003ffffff
    PCI: region 0000:08:02.1/9 too large: 0x0000000000000000-0x0000000003ffffff
    PCI: region 0000:08:02.0/10 too large: 0x0000000000000000-0x0000000003ffffff
    PCI: region 0000:08:02.1/10 too large: 0x0000000000000000-0x0000000003ffffff
    PCI: Bridge: 0000:00:01.0
    IO window: 2000-2fff
    MEM window: 0xf0200000-0xf02fffff
    PREFETCH window: 0x00000000f8000000-0x00000000fbffffff
    PCI: Bus 15, cardbus bridge: 0000:00:02.0
    IO window: 0x00001400-0x000014ff
    IO window: 0x00001c00-0x00001cff
    PREFETCH window: 0x30000000-0x33ffffff
    MEM window: 0x34000000-0x37ffffff
    PCI: Bus 19, cardbus bridge: 0000:00:02.1
    IO window: 0x00003400-0x000034ff
    IO window: 0x00003800-0x000038ff
    PREFETCH window: 0x38000000-0x3bffffff
    MEM window: 0x3c000000-0x3fffffff
    PCI: Bus 9, cardbus bridge: 0000:08:02.0
    IO window: 0x00004000-0x000040ff
    IO window: 0x00004400-0x000044ff
    PCI: Bus 13, cardbus bridge: 0000:08:02.1
    IO window: 0x00004800-0x000048ff
    IO window: 0x00004c00-0x00004cff
    PCI: Bridge: 0000:00:04.0
    IO window: 4000-4fff
    MEM window: disabled.
    PREFETCH window: disabled.
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt 0000:08:02.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI Interrupt 0000:08:02.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 662k freed
    Simple Boot Flag at 0x35 set to 0x1
    IBM machine detected. Enabling interrupts during APM calls.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1006
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
    pci 0000:01:00.0: Boot video device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial 00:0c: activated
    00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 264k freed
    input: AT Translated Set 2 keyboard as /class/input/input1
    ACPI: ACPI Dock Station Driver
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:07.1: version 2.12
    scsi0 : ata_piix
    scsi1 : ata_piix
    Switched to high resolution mode on CPU 0
    ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
    ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
    ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
    ata1.00: 195371568 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/33
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
    ACPI: PCI Interrupt 0000:08:01.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI interrupt for device 0000:08:01.0 disabled
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda:<4>Driver 'sr' needs updating - please use bus_type methods
    sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ReiserFS: sda2: found reiserfs format "3.6" with standard journal
    ReiserFS: sda2: using ordered data mode
    ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda2: checking transaction log (sda2)
    ReiserFS: sda2: Using r5 hash to sort names
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    Non-volatile memory driver v1.2
    thinkpad_acpi: ThinkPad ACPI Extras v0.20
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
    Registered led device: tpacpi::thinklight
    thinkpad_acpi: another device driver is already handling bay events
    thinkpad_acpi: disabling subdriver bay
    Registered led device: tpacpi::power
    Registered led device: tpacpi:orange:batt
    Registered led device: tpacpi:green:batt
    Registered led device: tpacpi::dock_active
    Registered led device: tpacpi::bay_active
    Registered led device: tpacpi::dock_batt
    Registered led device: tpacpi::unknown_led
    Registered led device: tpacpi::standby
    input: ThinkPad Extra Buttons as /class/input/input2
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    e100: eth0: e100_probe: addr 0xf0120000, irq 10, MAC addr 00:03:47:0f:de:3d
    eepro100.c:v1.09j-t 9/29/99 Donald Becker
    eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
    ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
    Linux agpgart interface v0.103
    agpgart: Detected an Intel 440BX Chipset.
    agpgart: AGP aperture is 64M @ 0xf4000000
    [drm] Initialized drm 1.1.0 20060810
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    [drm] Initialized r128 2.5.0 20030725 on minor 0
    ath_hal: module license 'Proprietary' taints kernel.
    AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    fuse init (API version 7.9)
    Marking TSC unstable due to: cpufreq changes.
    /proc/exmap: insert
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [LID]
    input: Sleep Button (CM) as /class/input/input5
    ACPI: Sleep Button (CM) [SLPB]
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:00 is registered as cooling_device0
    ACPI: Processor [CPU] (supports 8 throttling states)
    Clocksource tsc unstable (delta = 142862014 ns)
    ACPI: LNXTHERM:01 is registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (49 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Yenta: ISA IRQ mask 0x0038, PCI irq 11
    Socket status: 30000020
    Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
    Yenta: ISA IRQ mask 0x0038, PCI irq 9
    Socket status: 30000006
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Yenta: CardBus bridge found at 0000:08:02.0 [1014:0148]
    PCI: Bus 9, cardbus bridge: 0000:08:02.0
    IO window: 0x00004000-0x000040ff
    IO window: 0x00004400-0x000044ff
    PREFETCH window: 0x40400000-0x407fffff
    MEM window: 0x40800000-0x40bfffff
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:08:02.0, mfunc 0x00001002, devctl 0x66
    irq 11: nobody cared (try booting with the "irqpoll" option)
    Pid: 1799, comm: modprobe Tainted: P 2.6.26-ARCH #1
    [<c015a764>] __report_bad_irq+0x24/0x90
    [<c015aa52>] note_interrupt+0x282/0x2c0
    [<c0159e70>] handle_IRQ_event+0x30/0x60
    [<c015b2c3>] handle_level_irq+0xd3/0x100
    [<c010712b>] do_IRQ+0x3b/0x70
    [<c01049c7>] common_interrupt+0x23/0x28
    [<c0159e57>] handle_IRQ_event+0x17/0x60
    [<c015b26d>] handle_level_irq+0x7d/0x100
    [<c010712b>] do_IRQ+0x3b/0x70
    [<c01049c7>] common_interrupt+0x23/0x28
    [<c015007b>] show_initstate+0xb/0x50
    [<e0bd4830>] yenta_probe_cb_irq+0x80/0xf0 [yenta_socket]
    [<e0bd4bbb>] ti12xx_override+0x23b/0x6a0 [yenta_socket]
    [<c0210ce3>] pci_setup_cardbus+0x103/0x190
    [<e0bd5f02>] yenta_probe+0x5f2/0x643 [yenta_socket]
    [<c01cfa11>] sysfs_find_dirent+0x21/0x30
    [<c01d09c5>] sysfs_create_link+0x85/0x120
    [<c020b700>] pci_match_device+0xa0/0xc0
    [<c020b816>] pci_device_probe+0x56/0x80
    [<c026a9a6>] driver_probe_device+0x86/0x1a0
    [<c026ab31>] __driver_attach+0x71/0x80
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026a2d4>] bus_for_each_dev+0x44/0x70
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026a836>] driver_attach+0x16/0x20
    [<c026aac0>] __driver_attach+0x0/0x80
    [<c0269c67>] bus_add_driver+0x1a7/0x220
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026accc>] driver_register+0x5c/0x130
    [<c020ba4d>] __pci_register_driver+0x3d/0x80
    [<c0150738>] sys_init_module+0x148/0x1ca0
    [<c01a4bfa>] seq_open+0x3a/0x90
    [<c01c2aa6>] pde_users_dec+0x16/0x50
    [<e0bc9000>] hotplug_slot_attr_show+0x0/0x30 [pci_hotplug]
    [<c0268610>] device_remove_file+0x0/0x20
    [<c0103f73>] sysenter_past_esp+0x78/0xb1
    =======================
    handlers:
    [<e0a5f340>] (snd_cs46xx_interrupt+0x0/0x1e0 [snd_cs46xx])
    [<e0bd57e0>] (yenta_interrupt+0x0/0xe0 [yenta_socket])
    Disabling IRQ #11
    pccard: CardBus card inserted into slot 0
    ath_pci 0000:0f:00.0: enabling device (0000 -> 0002)
    ACPI: PCI Interrupt 0000:0f:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    input: PC Speaker as /class/input/input6
    USB Universal Host Controller Interface driver v3.0
    input: Video Bus as /class/input/input7
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /class/input/input8
    PPP generic driver version 2.4.2
    Uniform Multi-Platform E-IDE driver
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    parport_pc 00:0d: activated
    parport_pc 00:0d: reported by Plug and Play ACPI
    parport0: PC-style at 0x278, irq 5 [PCSPP,TRISTATE]
    MadWifi: ath_attach: Switching rfkill capability off.
    NET: Registered protocol family 23
    wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
    nsc-ircc 00:0e: activated
    nsc-ircc, chip->init
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=11
    IrDA: Registered device irda0
    nsc-ircc, Found dongle: Reserved
    ppdev: user-space parallel port driver
    Yenta: ISA IRQ mask 0x0018, PCI irq 10
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
    cs: IO port probe 0x4000-0x4fff: clean.
    Yenta: CardBus bridge found at 0000:08:02.1 [1014:0148]
    PCI: Bus 13, cardbus bridge: 0000:08:02.1
    IO window: 0x00004800-0x000048ff
    IO window: 0x00004c00-0x00004cff
    PREFETCH window: 0x40c00000-0x40ffffff
    MEM window: 0x41000000-0x413fffff
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:08:02.1, mfunc 0x00001002, devctl 0x66
    irq 11: nobody cared (try booting with the "irqpoll" option)
    Pid: 1799, comm: modprobe Tainted: P 2.6.26-ARCH #1
    [<c015a764>] __report_bad_irq+0x24/0x90
    [<c015aa52>] note_interrupt+0x282/0x2c0
    [<c0159e70>] handle_IRQ_event+0x30/0x60
    [<c015b2c3>] handle_level_irq+0xd3/0x100
    [<c010712b>] do_IRQ+0x3b/0x70
    [<c01049c7>] common_interrupt+0x23/0x28
    [<c014007b>] set_process_cpu_timer+0x2b/0xd0
    [<c0159e57>] handle_IRQ_event+0x17/0x60
    [<c015b26d>] handle_level_irq+0x7d/0x100
    [<c010712b>] do_IRQ+0x3b/0x70
    [<c01049c7>] common_interrupt+0x23/0x28
    [<c015007b>] show_initstate+0xb/0x50
    [<e0bd4830>] yenta_probe_cb_irq+0x80/0xf0 [yenta_socket]
    [<e0bd4aff>] ti12xx_override+0x17f/0x6a0 [yenta_socket]
    [<c0210ce3>] pci_setup_cardbus+0x103/0x190
    [<e0bd5f02>] yenta_probe+0x5f2/0x643 [yenta_socket]
    [<c01cfa11>] sysfs_find_dirent+0x21/0x30
    [<c01d09c5>] sysfs_create_link+0x85/0x120
    [<c020b700>] pci_match_device+0xa0/0xc0
    [<c020b816>] pci_device_probe+0x56/0x80
    [<c026a9a6>] driver_probe_device+0x86/0x1a0
    [<c026ab31>] __driver_attach+0x71/0x80
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026a2d4>] bus_for_each_dev+0x44/0x70
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026a836>] driver_attach+0x16/0x20
    [<c026aac0>] __driver_attach+0x0/0x80
    [<c0269c67>] bus_add_driver+0x1a7/0x220
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026accc>] driver_register+0x5c/0x130
    [<c020ba4d>] __pci_register_driver+0x3d/0x80
    [<c0150738>] sys_init_module+0x148/0x1ca0
    [<c01a4bfa>] seq_open+0x3a/0x90
    [<c01c2aa6>] pde_users_dec+0x16/0x50
    [<e0bc9000>] hotplug_slot_attr_show+0x0/0x30 [pci_hotplug]
    [<c0268610>] device_remove_file+0x0/0x20
    [<c0103f73>] sysenter_past_esp+0x78/0xb1
    =======================
    handlers:
    [<e0a5f340>] (snd_cs46xx_interrupt+0x0/0x1e0 [snd_cs46xx])
    [<e0bd57e0>] (yenta_interrupt+0x0/0xe0 [yenta_socket])
    [<e0ae4e30>] (ath_intr+0x0/0x4810 [ath_pci])
    Disabling IRQ #11
    Yenta: ISA IRQ mask 0x0018, PCI irq 10
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
    cs: IO port probe 0x4000-0x4fff: clean.
    ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
    uhci_hcd 0000:00:07.2: UHCI Host Controller
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:07.2: irq 7, io base 0x00001860
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
    piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
    piix4_smbus: probe of 0000:00:07.3 failed with error -1
    CMD648: IDE controller (0x1095:0x0648 rev 0x01) at PCI slot 0000:08:01.0
    ACPI: PCI Interrupt 0000:08:01.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
    CMD648: 100% native mode on irq 9
    ide0: BM-DMA at 0x3000-0x3007
    ide1: BM-DMA at 0x3008-0x300f
    Probing IDE interface ide0...
    usb 1-1: new full speed USB device using uhci_hcd and address 2
    usb 1-1: configuration #1 chosen from 1 choice
    hub 1-1:1.0: USB hub found
    hub 1-1:1.0: 4 ports detected
    Probing IDE interface ide1...
    usb 1-1.4: new low speed USB device using uhci_hcd and address 3
    usb 1-1.4: configuration #1 chosen from 1 choice
    ide0 at 0x3020-0x3027,0x3016 on irq 9
    ide1 at 0x3018-0x301f,0x3012 on irq 9
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    lp0: using parport0 (interrupt-driven).
    usbcore: registered new interface driver hiddev
    input: Logitech Logitech USB Optical Mouse as /class/input/input9
    input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1.4
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    JFS: nTxBlock = 4027, nTxLock = 32219
    Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
    warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    conservative governor failed, too long transition latency of HW, fallback to performance governor
    thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
    For comparison here is my dockless dmesg:
    Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008
    PAT disabled. Not yet verified on this CPU type.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
    BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    Entering add_active_range(0, 0, 131056) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 131056
    HighMem 131056 -> 131056
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 131056
    On node 0 totalpages: 131056
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 992 pages used for memmap
    Normal zone: 125968 pages, LIFO batch:31
    HighMem zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    DMI 2.3 present.
    ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
    ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
    ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
    ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
    ACPI: FACS 1FFFF000, 0040
    ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
    ACPI: PM-Timer IO Port: 0x1008
    Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    SMP: Allowing 0 CPUs, 0 hotplug CPUs
    PERCPU: Allocating 39464 bytes of per cpu data
    NR_CPUS: 16, nr_cpu_ids: 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130032
    Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
    ACPI: Added _OSI(Linux)
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffb000 (0140e000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    Detected 697.425 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 514452k/524224k available (2120k kernel code, 9264k reserved, 744k data, 264k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee4000 - 0xfffff000 (1132 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
    lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
    .init : 0xc03d3000 - 0xc0415000 ( 264 kB)
    .data : 0xc031225e - 0xc03cc380 ( 744 kB)
    .text : 0xc0100000 - 0xc031225e (2120 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay using timer specific routine.. 1396.15 BogoMIPS (lpj=2326640)
    Security Framework initialized
    Capability LSM initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20080321
    ACPI: Checking initramfs for custom DSDT
    ACPI: setting ELCR to 0200 (from 0a20)
    weird, boot CPU (#0) not listedby the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (1396.15 BogoMIPS).
    net_namespace: 652 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
    PCI: Using configuration type 1 for base access
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
    pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
    pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
    pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
    pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11)
    ACPI: Power Resource [PSER] (off)
    ACPI: Power Resource [PSIO] (on)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
    PCI: setting IRQ 5 as level-triggered
    ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
    PCI: setting IRQ 9 as level-triggered
    ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
    ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
    system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x103f has been reserved
    system 00:02: ioport range 0x1040-0x104f has been reserved
    system 00:02: ioport range 0xfe00-0xfe0f has been reserved
    system 00:09: ioport range 0x15e0-0x15ef has been reserved
    PCI: Bridge: 0000:00:01.0
    IO window: 2000-2fff
    MEM window: 0xf0200000-0xf02fffff
    PREFETCH window: 0x00000000f8000000-0x00000000fbffffff
    PCI: Bus 2, cardbus bridge: 0000:00:02.0
    IO window: 0x00001400-0x000014ff
    IO window: 0x00001c00-0x00001cff
    PREFETCH window: 0x30000000-0x33ffffff
    MEM window: 0x34000000-0x37ffffff
    PCI: Bus 6, cardbus bridge: 0000:00:02.1
    IO window: 0x00003000-0x000030ff
    IO window: 0x00003400-0x000034ff
    PREFETCH window: 0x38000000-0x3bffffff
    MEM window: 0x3c000000-0x3fffffff
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 662k freed
    Simple Boot Flag at 0x35 set to 0x1
    IBM machine detected. Enabling interrupts during APM calls.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1006
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
    pci 0000:01:00.0: Boot video device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial 00:0c: activated
    00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 264k freed
    input: AT Translated Set 2 keyboard as /class/input/input1
    Switched to high resolution mode on CPU 0
    ACPI: ACPI Dock Station Driver
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:07.1: version 2.12
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
    ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
    ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
    ata1.00: 195371568 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/33
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda:<4>Driver 'sr' needs updating - please use bus_type methods
    sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ReiserFS: sda2: found reiserfs format "3.6" with standard journal
    ReiserFS: sda2: using ordered data mode
    ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda2: checking transaction log (sda2)
    ReiserFS: sda2: Using r5 hash to sort names
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    Non-volatile memory driver v1.2
    thinkpad_acpi: ThinkPad ACPI Extras v0.20
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
    Registered led device: tpacpi::thinklight
    thinkpad_acpi: another device driver is already handling bay events
    thinkpad_acpi: disabling subdriver bay
    Registered led device: tpacpi::power
    Registered led device: tpacpi:orange:batt
    Registered led device: tpacpi:green:batt
    Registered led device: tpacpi::dock_active
    Registered led device: tpacpi::bay_active
    Registered led device: tpacpi::dock_batt
    Registered led device: tpacpi::unknown_led
    Registered led device: tpacpi::standby
    input: ThinkPad Extra Buttons as /class/input/input2
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
    e100: eth0: e100_probe: addr 0xf0120000, irq 9, MAC addr 00:03:47:0f:de:3d
    eepro100.c:v1.09j-t 9/29/99 Donald Becker
    eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
    ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
    Linux agpgart interface v0.103
    agpgart: Detected an Intel 440BX Chipset.
    agpgart: AGP aperture is 64M @ 0xf4000000
    [drm] Initialized drm 1.1.0 20060810
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    [drm] Initialized r128 2.5.0 20030725 on minor 0
    ath_hal: module license 'Proprietary' taints kernel.
    AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    fuse init (API version 7.9)
    Marking TSC unstable due to: cpufreq changes.
    /proc/exmap: insert
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [LID]
    input: Sleep Button (CM) as /class/input/input5
    ACPI: Sleep Button (CM) [SLPB]
    Clocksource tsc unstable (delta = 142842086 ns)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:00 is registered as cooling_device0
    ACPI: Processor [CPU] (supports 8 throttling states)
    ACPI: LNXTHERM:01 is registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (50 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
    spurious 8259A interrupt: IRQ7.
    Yenta: ISA IRQ mask 0x0498, PCI irq 11
    Socket status: 30000020
    Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
    Yenta: ISA IRQ mask 0x0498, PCI irq 5
    Socket status: 30000006
    pccard: CardBus card inserted into slot 0
    ath_pci 0000:02:00.0: enabling device (0000 -> 0002)
    ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    input: PC Speaker as /class/input/input6
    piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
    piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
    piix4_smbus: probe of 0000:00:07.3 failed with error -1
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
    uhci_hcd 0000:00:07.2: UHCI Host Controller
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:07.2: irq 5, io base 0x00001860
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    input: Video Bus as /class/input/input7
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /class/input/input8
    PPP generic driver version 2.4.2
    parport_pc 00:0d: activated
    parport_pc 00:0d: reported by Plug and Play ACPI
    parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
    NET: Registered protocol family 23
    nsc-ircc 00:0e: activated
    nsc-ircc, chip->init
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    IrDA: Registered device irda0
    nsc-ircc, Found dongle: Reserved
    MadWifi: ath_attach: Switching rfkill capability off.
    wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
    ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=11
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    lp0: using parport0 (interrupt-driven).
    ppdev: user-space parallel port driver
    JFS: nTxBlock = 4027, nTxLock = 32219
    Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
    warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    conservative governor failed, too long transition latency of HW, fallback to performance governor
    thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
    I've tried multiple options in the BIOS. You can select AGP or PCI as the card for the root display device. The default is PCI so if there's a docked PCI card at POST, the BIOS will use that for the root display device... otherwise it will use the built in card. You can also select the root display device as LCD or CRT or both. The default is CRT so if there is an external monitor that's where the bootloader menu and such will appear, otherwise the laptop's own display gets used. Even if I've understood these incorrectly, all combinations yield a PCI video card that is not detected by lspci.
    I've also tried loading the module dock right after thinkpad_acpi. It loads and appears in lsmod but it doesn't help the situation at all. It also doesn't add a dock file to /proc/acpi/ibm. I also tried passing pci=routirq to the kernel, whatever that does and I've tried changing the four PCI related IRQ numbers in the BIOS and this has not helped.

    I did upgrade the kernel yesterday and it caused the syntax of dmesg to change somewhat. Here is a docked dmesg from 2.6.27:
    Linux version 2.6.27-ARCH (root@architect) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Sun Oct 12 15:16:25 CEST 2008
    PAT WC disabled due to known CPU erratum.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
    BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    last_pfn = 0x1fff0 max_arch_pfn = 0x100000
    kernel direct mapping tables up to 1fff0000 @ 7000-d000
    RAMDISK: 00e4d000 - 00effb5b
    DMI 2.3 present.
    ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
    ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
    ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
    ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
    ACPI: FACS 1FFFF000, 0040
    ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    mapped low ram: 0 - 1fff0000
    low ram: 00000000 - 1fff0000
    bootmap 00002000 - 00006000
    (9 early reservations) ==> bootmem [0000000000 - 001fff0000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0000100000 - 000050c280] TEXT DATA BSS ==> [0000100000 - 000050c280]
    #4 [0000e4d000 - 0000effb5b] RAMDISK ==> [0000e4d000 - 0000effb5b]
    #5 [000050d000 - 0000510000] INIT_PG_TABLE ==> [000050d000 - 0000510000]
    #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
    #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
    #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    Normal 0x00001000 -> 0x0001fff0
    HighMem 0x0001fff0 -> 0x0001fff0
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0001fff0
    On node 0 totalpages: 130959
    free_area_init_node: node 0, pgdat c03d9580, node_mem_map c1000000
    DMA zone: 3967 pages, LIFO batch:0
    Normal zone: 125968 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    SMP: Allowing 1 CPUs, 0 hotplug CPUs
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffb000 (01402000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
    PERCPU: Allocating 39324 bytes of per cpu data
    NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935
    Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
    ACPI: Added _OSI(Linux)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    TSC: PIT calibration confirmed by PMTIMER.
    TSC: using PIT calibration value
    Detected 697.407 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 514248k/524224k available (2151k kernel code, 9460k reserved, 844k data, 288k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
    lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
    .init : 0xc03f3000 - 0xc043b000 ( 288 kB)
    .data : 0xc0319f76 - 0xc03ed360 ( 844 kB)
    .text : 0xc0100000 - 0xc0319f76 (2151 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay loop (skipped), value calculated using timer frequency.. 1395.93 BogoMIPS (lpj=2324690)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20080609
    ACPI: Checking initramfs for custom DSDT
    ACPI: setting ELCR to 0200 (from 0e00)
    weird, boot CPU (#0) not listedby the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (1395.93 BogoMIPS).
    net_namespace: 832 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=14
    PCI: Using configuration type 1 for base access
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: 0000:00:00.0 reg 10 32bit mmio: [f4000000, f7ffffff]
    PCI: 0000:00:02.0 reg 10 32bit mmio: [50000000, 50000fff]
    pci 0000:00:02.0: supports D1
    pci 0000:00:02.0: supports D2
    pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.0: PME# disabled
    PCI: 0000:00:02.1 reg 10 32bit mmio: [50100000, 50100fff]
    pci 0000:00:02.1: supports D1
    pci 0000:00:02.1: supports D2
    pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.1: PME# disabled
    PCI: 0000:00:03.0 reg 10 32bit mmio: [f0120000, f0120fff]
    PCI: 0000:00:03.0 reg 14 io port: [1800, 183f]
    PCI: 0000:00:03.0 reg 18 32bit mmio: [f0100000, f011ffff]
    PCI: 0000:00:03.0 reg 30 32bit mmio: [0, fffff]
    pci 0000:00:03.0: supports D1
    pci 0000:00:03.0: supports D2
    pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:03.0: PME# disabled
    PCI: 0000:00:03.1 reg 10 io port: [1840, 1847]
    PCI: 0000:00:03.1 reg 14 32bit mmio: [f0121000, f0121fff]
    pci 0000:00:03.1: supports D1
    pci 0000:00:03.1: supports D2
    pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:03.1: PME# disabled
    pci 0000:00:04.0: supports D1
    pci 0000:00:04.0: supports D2
    PCI: 0000:00:05.0 reg 10 32bit mmio: [f0122000, f0122fff]
    PCI: 0000:00:05.0 reg 14 32bit mmio: [f0000000, f00fffff]
    pci 0000:00:05.0: supports D1
    pci 0000:00:05.0: supports D2
    PCI: 0000:00:07.1 reg 20 io port: [1850, 185f]
    PCI: 0000:00:07.2 reg 20 io port: [1860, 187f]
    pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
    pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
    pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
    pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
    pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
    PCI: 0000:01:00.0 reg 10 32bit mmio: [f8000000, fbffffff]
    PCI: 0000:01:00.0 reg 14 io port: [2000, 20ff]
    PCI: 0000:01:00.0 reg 18 32bit mmio: [f0200000, f0203fff]
    PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
    pci 0000:01:00.0: supports D1
    pci 0000:01:00.0: supports D2
    PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
    PCI: bridge 0000:00:01.0 32bit mmio: [f0200000, f02fffff]
    PCI: bridge 0000:00:01.0 32bit mmio pref: [f8000000, fbffffff]
    PCI: 0000:08:01.0 reg 10 io port: [3020, 3027]
    PCI: 0000:08:01.0 reg 14 io port: [3014, 3017]
    PCI: 0000:08:01.0 reg 18 io port: [3018, 301f]
    PCI: 0000:08:01.0 reg 1c io port: [3010, 3013]
    PCI: 0000:08:01.0 reg 20 io port: [3000, 300f]
    pci 0000:08:01.0: supports D1
    pci 0000:08:01.0: supports D2
    PCI: 0000:08:02.0 reg 10 32bit mmio: [52000000, 52000fff]
    pci 0000:08:02.0: supports D1
    pci 0000:08:02.0: supports D2
    pci 0000:08:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:08:02.0: PME# disabled
    PCI: 0000:08:02.1 reg 10 32bit mmio: [53000000, 53000fff]
    pci 0000:08:02.1: supports D1
    pci 0000:08:02.1: supports D2
    pci 0000:08:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:08:02.1: PME# disabled
    pci 0000:00:04.0: transparent bridge
    PCI: bridge 0000:00:04.0 io port: [0, fff]
    PCI: bridge 0000:00:04.0 32bit mmio: [0, fffff]
    PCI: bridge 0000:00:04.0 32bit mmio pref: [0, fffff]
    bus 00 -> node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DOCK._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
    ACPI: Power Resource [PSER] (off)
    ACPI: Power Resource [PSIO] (on)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:02: io resource (0x22-0x22) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:02: io resource (0x92-0x92) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:02: io resource (0xb2-0xb3) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:0a: io resource (0x2e-0x2f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
    PCI: setting IRQ 9 as level-triggered
    pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
    pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    pci 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
    pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    pci 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    pci 0000:08:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:08:02.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:04.0: BAR 7: can't allocate resource
    pci 0000:00:04.0: BAR 8: can't allocate resource
    pci 0000:00:04.0: BAR 9: can't allocate resource
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
    system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x103f has been reserved
    system 00:02: ioport range 0x1040-0x104f has been reserved
    system 00:02: ioport range 0xfe00-0xfe0f has been reserved
    system 00:09: ioport range 0x15e0-0x15ef has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x2000-0x2fff
    pci 0000:00:01.0: MEM window: 0xf0200000-0xf02fffff
    pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff
    pci 0000:00:02.0: CardBus bridge, secondary bus 0000:0f
    pci 0000:00:02.0: IO window: 0x001400-0x0014ff
    pci 0000:00:02.0: IO window: 0x001c00-0x001cff
    pci 0000:00:02.0: PREFETCH window: 0x30000000-0x33ffffff
    pci 0000:00:02.0: MEM window: 0x34000000-0x37ffffff
    pci 0000:00:02.1: CardBus bridge, secondary bus 0000:13
    pci 0000:00:02.1: IO window: 0x003400-0x0034ff
    pci 0000:00:02.1: IO window: 0x003800-0x0038ff
    pci 0000:00:02.1: PREFETCH window: 0x38000000-0x3bffffff
    pci 0000:00:02.1: MEM window: 0x3c000000-0x3fffffff
    pci 0000:08:02.0: CardBus bridge, secondary bus 0000:09
    pci 0000:08:02.0: IO window: 0x004000-0x0040ff
    pci 0000:08:02.0: IO window: 0x004400-0x0044ff
    pci 0000:08:02.0: PREFETCH window: 0x48000000-0x4bffffff
    pci 0000:08:02.0: MEM window: 0x40000000-0x43ffffff
    pci 0000:08:02.1: CardBus bridge, secondary bus 0000:0d
    pci 0000:08:02.1: IO window: 0x004800-0x0048ff
    pci 0000:08:02.1: IO window: 0x004c00-0x004cff
    pci 0000:08:02.1: PREFETCH window: 0x4c000000-0x4fffffff
    pci 0000:08:02.1: MEM window: 0x44000000-0x47ffffff
    pci 0000:00:04.0: PCI bridge, secondary bus 0000:08
    pci 0000:00:04.0: IO window: 0x4000-0x4fff
    pci 0000:00:04.0: MEM window: 0x40000000-0x47ffffff
    pci 0000:00:04.0: PREFETCH window: 0x00000048000000-0x0000004fffffff
    pci 0000:00:02.0: power state changed by ACPI to D0
    pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    pci 0000:00:02.1: power state changed by ACPI to D0
    pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    pci 0000:08:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:08:02.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    bus: 00 index 0 io port: [0, ffff]
    bus: 00 index 1 mmio: [0, ffffffff]
    bus: 01 index 0 io port: [2000, 2fff]
    bus: 01 index 1 mmio: [f0200000, f02fffff]
    bus: 01 index 2 mmio: [f8000000, fbffffff]
    bus: 01 index 3 mmio: [0, 0]
    bus: 0f index 0 io port: [1400, 14ff]
    bus: 0f index 1 io port: [1c00, 1cff]
    bus: 0f index 2 mmio: [30000000, 33ffffff]
    bus: 0f index 3 mmio: [34000000, 37ffffff]
    bus: 13 index 0 io port: [3400, 34ff]
    bus: 13 index 1 io port: [3800, 38ff]
    bus: 13 index 2 mmio: [38000000, 3bffffff]
    bus: 13 index 3 mmio: [3c000000, 3fffffff]
    bus: 08 index 0 io port: [4000, 4fff]
    bus: 08 index 1 mmio: [40000000, 47ffffff]
    bus: 08 index 2 mmio: [48000000, 4fffffff]
    bus: 08 index 3 io port: [0, ffff]
    bus: 08 index 4 mmio: [0, ffffffff]
    bus: 09 index 0 io port: [4000, 40ff]
    bus: 09 index 1 io port: [4400, 44ff]
    bus: 09 index 2 mmio: [48000000, 4bffffff]
    bus: 09 index 3 mmio: [40000000, 43ffffff]
    bus: 0d index 0 io port: [4800, 48ff]
    bus: 0d index 1 io port: [4c00, 4cff]
    bus: 0d index 2 mmio: [4c000000, 4fffffff]
    bus: 0d index 3 mmio: [44000000, 47ffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 714k freed
    Simple Boot Flag at 0x35 set to 0x1
    IBM machine detected. Enabling interrupts during APM calls.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1006
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
    pci 0000:01:00.0: Boot video device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver4 ports, IRQ sharing disabled
    serial 00:0c: activated
    00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 288k freed
    Switched to high resolution mode on CPU 0
    input: AT Translated Set 2 keyboard as /class/input/input1
    ACPI: ACPI Dock Station Driver
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:07.1: version 2.12
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
    ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
    ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
    ata1.00: 195371568 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/33
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
    pata_acpi 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    pata_acpi 0000:08:01.0: PCI INT A disabled
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    Driver 'sr' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ReiserFS: sda2: found reiserfs format "3.6" with standard journal
    ReiserFS: sda2: using ordered data mode
    ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda2: checking transaction log (sda2)
    ReiserFS: sda2: Using r5 hash to sort names
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    Non-volatile memory driver v1.2
    thinkpad_acpi: ThinkPad ACPI Extras v0.21
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
    Registered led device: tpacpi::thinklight
    thinkpad_acpi: another device driver is already handling bay events
    thinkpad_acpi: disabling subdriver bay
    Registered led device: tpacpi::power
    Registered led device: tpacpi:orange:batt
    Registered led device: tpacpi:green:batt
    Registered led device: tpacpi::dock_active
    Registered led device: tpacpi::bay_active
    Registered led device: tpacpi::dock_batt
    Registered led device: tpacpi::unknown_led
    Registered led device: tpacpi::standby
    input: ThinkPad Extra Buttons as /class/input/input2
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    e100 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    e100 0000:00:03.0: PME# disabled
    e100: eth0: e100_probe: addr 0xf0120000, irq 11, MAC addr 00:03:47:0f:de:3d
    eepro100.c:v1.09j-t 9/29/99 Donald Becker
    eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
    Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
    Linux agpgart interface v0.103
    agpgart-intel 0000:00:00.0: Intel 440BX Chipset
    agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
    [drm] Initialized drm 1.1.0 20060810
    pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    [drm] Initialized r128 2.5.0 20030725 on minor 0
    ath_hal: module license 'Proprietary' taints kernel.
    AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    fuse init (API version 7.9)
    Marking TSC unstable due to cpufreq changes
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [LID]
    input: Sleep Button (CM) as /class/input/input5
    ACPI: Sleep Button (CM) [SLPB]
    Clocksource tsc unstable (delta = 142865538 ns)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI0007:00: registered as cooling_device0
    ACPI: Processor [CPU] (supports 8 throttling states)
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (24 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
    Yenta: ISA IRQ mask 0x00b8, PCI irq 9
    Socket status: 30000020
    Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
    Yenta: ISA IRQ mask 0x00b8, PCI irq 9
    Socket status: 30000006
    Yenta: CardBus bridge found at 0000:08:02.0 [1014:0148]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:08:02.0, mfunc 0x00001002, devctl 0x66
    irq 9: nobody cared (try booting with the "irqpoll" option)
    Pid: 1302, comm: modprobe Tainted: P 2.6.27-ARCH #1
    [<c015ce54>] __report_bad_irq+0x24/0x90
    [<c015d142>] note_interrupt+0x282/0x2c0
    [<c015c450>] handle_IRQ_event+0x30/0x60
    [<c015d9b3>] handle_level_irq+0xd3/0x100
    [<c010710b>] do_IRQ+0x3b/0x70
    [<c0104927>] common_interrupt+0x23/0x28
    [<c03100d8>] cache_add_dev+0x272/0x44a
    [<c015c430>] handle_IRQ_event+0x10/0x60
    [<c015d95d>] handle_level_irq+0x7d/0x100
    [<c010710b>] do_IRQ+0x3b/0x70
    [<c015cbc1>] setup_irq+0x121/0x250
    [<c0104927>] common_interrupt+0x23/0x28
    [<c015007b>] rt_mutex_adjust_prio_chain+0x20b/0x340
    [<e0c168cc>] yenta_probe_cb_irq+0x9c/0x110 [yenta_socket]
    [<e0c16c58>] ti12xx_override+0x238/0x6a0 [yenta_socket]
    [<e0c17fe2>] yenta_probe+0x622/0x673 [yenta_socket]
    [<c01d4012>] sysfs_add_one+0x12/0x50
    [<c01d40bd>] sysfs_addrm_start+0x6d/0xc0
    [<c0318f05>] _spin_unlock+0x5/0x20
    [<c020bce0>] pci_match_device+0xa0/0xc0
    [<c020c4b6>] pci_device_probe+0x56/0x80
    [<c026da76>] driver_probe_device+0x86/0x1a0
    [<c0318af4>] _spin_lock_irqsave+0x34/0x50
    [<c026dc01>] __driver_attach+0x71/0x80
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026d3a4>] bus_for_each_dev+0x44/0x70
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026d906>] driver_attach+0x16/0x20
    [<c026db90>] __driver_attach+0x0/0x80
    [<c026cd37>] bus_add_driver+0x1a7/0x220
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026dd9c>] driver_register+0x5c/0x130
    [<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
    [<c020c6f7>] __pci_register_driver+0x47/0x90
    [<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
    [<c010111a>] do_one_initcall+0x2a/0x160
    [<c0123480>] hrtick_start_fair+0x190/0x1b0
    [<c0126635>] check_preempt_wakeup+0xe5/0x120
    [<c0126def>] try_to_wake_up+0xaf/0x180
    [<c015474b>] sys_init_module+0x8b/0x1b0
    [<c0103ef3>] sysenter_do_call+0x12/0x33
    =======================
    handlers:
    [<c0229cfc>] (acpi_irq+0x0/0x1f)
    [<e0a663c0>] (snd_cs46xx_interrupt+0x0/0x1f0 [snd_cs46xx])
    [<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
    [<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
    Disabling IRQ #9
    pccard: CardBus card inserted into slot 0
    PCI: 0000:0f:00.0 reg 10 32bit mmio: [0, ffff]
    ath_pci 0000:0f:00.0: enabling device (0000 -> 0002)
    ath_pci 0000:0f:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    input: PC Speaker as /class/input/input6
    USB Universal Host Controller Interface driver v3.0
    input: Video Bus as /class/input/input7
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    Error: Driver 'pcspkr' is already registered, aborting...
    NET: Registered protocol family 23
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /class/input/input8
    parport_pc 00:0d: activated
    parport_pc 00:0d: reported by Plug and Play ACPI
    parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
    nsc-ircc 00:0e: activated
    nsc-ircc, chip->init
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    IrDA: Registered device irda0
    nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
    PPP generic driver version 2.4.2
    Uniform Multi-Platform E-IDE driver
    MadWifi: ath_attach: Switching rfkill capability off.
    wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
    ppdev: user-space parallel port driver
    ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=9
    Yenta: ISA IRQ mask 0x0038, PCI irq 11
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
    cs: IO port probe 0x4000-0x4fff: clean.
    pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
    pcmcia: parent PCI bridge Memory window: 0x48000000 - 0x4fffffff
    cmd64x 0000:08:01.0: IDE controller (0x1095:0x0648 rev 0x01)
    CMD64x_IDE 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    cmd64x 0000:08:01.0: 100% native mode on irq 9
    ide0: BM-DMA at 0x3000-0x3007
    ide1: BM-DMA at 0x3008-0x300f
    Probing IDE interface ide0...
    Probing IDE interface ide1...
    ide0 at 0x3020-0x3027,0x3016 on irq 9
    ide1 at 0x3018-0x301f,0x3012 on irq 9
    piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
    piix4_smbus: probe of 0000:00:07.3 failed with error -1
    Yenta: CardBus bridge found at 0000:08:02.1 [1014:0148]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:08:02.1, mfunc 0x00001002, devctl 0x66
    irq 9: nobody cared (try booting with the "irqpoll" option)
    Pid: 1302, comm: modprobe Tainted: P 2.6.27-ARCH #1
    [<c015ce54>] __report_bad_irq+0x24/0x90
    [<c015d142>] note_interrupt+0x282/0x2c0
    [<c015c450>] handle_IRQ_event+0x30/0x60
    [<c015d9b3>] handle_level_irq+0xd3/0x100
    [<c010710b>] do_IRQ+0x3b/0x70
    [<c0104927>] common_interrupt+0x23/0x28
    [<c031007b>] cache_add_dev+0x215/0x44a
    [<c03100d8>] cache_add_dev+0x272/0x44a
    [<c015c430>] handle_IRQ_event+0x10/0x60
    [<c015d95d>] handle_level_irq+0x7d/0x100
    [<c010710b>] do_IRQ+0x3b/0x70
    [<c015cbc1>] setup_irq+0x121/0x250
    [<c0104927>] common_interrupt+0x23/0x28
    [<c015007b>] rt_mutex_adjust_prio_chain+0x20b/0x340
    [<e0c168cc>] yenta_probe_cb_irq+0x9c/0x110 [yenta_socket]
    [<e0c16b97>] ti12xx_override+0x177/0x6a0 [yenta_socket]
    [<e0c17fe2>] yenta_probe+0x622/0x673 [yenta_socket]
    [<c01d4012>] sysfs_add_one+0x12/0x50
    [<c01d40bd>] sysfs_addrm_start+0x6d/0xc0
    [<c0318f05>] _spin_unlock+0x5/0x20
    [<c020bce0>] pci_match_device+0xa0/0xc0
    [<c020c4b6>] pci_device_probe+0x56/0x80
    [<c026da76>] driver_probe_device+0x86/0x1a0
    [<c0318af4>] _spin_lock_irqsave+0x34/0x50
    [<c026dc01>] __driver_attach+0x71/0x80
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026d3a4>] bus_for_each_dev+0x44/0x70
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026d906>] driver_attach+0x16/0x20
    [<c026db90>] __driver_attach+0x0/0x80
    [<c026cd37>] bus_add_driver+0x1a7/0x220
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026dd9c>] driver_register+0x5c/0x130
    [<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
    [<c020c6f7>] __pci_register_driver+0x47/0x90
    [<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
    [<c010111a>] do_one_initcall+0x2a/0x160
    [<c0123480>] hrtick_start_fair+0x190/0x1b0
    [<c0126635>] check_preempt_wakeup+0xe5/0x120
    [<c0126def>] try_to_wake_up+0xaf/0x180
    [<c015474b>] sys_init_module+0x8b/0x1b0
    [<c0103ef3>] sysenter_do_call+0x12/0x33
    =======================
    handlers:
    [<c0229cfc>] (acpi_irq+0x0/0x1f)
    [<e0a663c0>] (snd_cs46xx_interrupt+0x0/0x1f0 [snd_cs46xx])
    [<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
    [<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
    [<e0b3fdf0>] (ath_intr+0x0/0x4880 [ath_pci])
    [<e0cf28a0>] (ide_intr+0x0/0x220 [ide_core])
    [<e0cf28a0>] (ide_intr+0x0/0x220 [ide_core])
    Disabling IRQ #9
    Yenta: ISA IRQ mask 0x0038, PCI irq 11
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
    cs: IO port probe 0x4000-0x4fff: clean.
    pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
    pcmcia: parent PCI bridge Memory window: 0x48000000 - 0x4fffffff
    uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
    uhci_hcd 0000:00:07.2: UHCI Host Controller
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:07.2: irq 10, io base 0x00001860
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    usb 1-1: new full speed USB device using uhci_hcd and address 2
    usb 1-1: configuration #1 chosen from 1 choice
    hub 1-1:1.0: USB hub found
    hub 1-1:1.0: 4 ports detected
    lp0: using parport0 (interrupt-driven).
    usb 1-1.4: new low speed USB device using uhci_hcd and address 3
    usb 1-1.4: configuration #1 chosen from 1 choice
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    usbcore: registered new interface driver hiddev
    input: Logitech Logitech USB Optical Mouse as /class/input/input9
    input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1.4
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    ACPI: EC: missing confirmations, switch off interrupt mode.
    JFS: nTxBlock = 4026, nTxLock = 32211
    Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
    warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    conservative governor failed, too long transition latency of HW, fallback to performance governor
    thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
    Note the "can't allocate resource areas"... And here is the new dockless dmesg:
    Linux version 2.6.27-ARCH (root@architect) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Sun Oct 12 15:16:25 CEST 2008
    PAT WC disabled due to known CPU erratum.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
    BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    last_pfn = 0x1fff0 max_arch_pfn = 0x100000
    kernel direct mapping tables up to 1fff0000 @ 7000-d000
    RAMDISK: 00e4d000 - 00effb5b
    DMI 2.3 present.
    ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
    ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
    ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
    ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
    ACPI: FACS 1FFFF000, 0040
    ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    mapped low ram: 0 - 1fff0000
    low ram: 00000000 - 1fff0000
    bootmap 00002000 - 00006000
    (9 early reservations) ==> bootmem [0000000000 - 001fff0000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0000100000 - 000050c280] TEXT DATA BSS ==> [0000100000 - 000050c280]
    #4 [0000e4d000 - 0000effb5b] RAMDISK ==> [0000e4d000 - 0000effb5b]
    #5 [000050d000 - 0000510000] INIT_PG_TABLE ==> [000050d000 - 0000510000]
    #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
    #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
    #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    Normal 0x00001000 -> 0x0001fff0
    HighMem 0x0001fff0 -> 0x0001fff0
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0001fff0
    On node 0 totalpages: 130959
    free_area_init_node: node 0, pgdat c03d9580, node_mem_map c1000000
    DMA zone: 3967 pages, LIFO batch:0
    Normal zone: 125968 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    SMP: Allowing 1 CPUs, 0 hotplug CPUs
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffb000 (01402000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
    PERCPU: Allocating 39324 bytes of per cpu data
    NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935
    Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
    ACPI: Added _OSI(Linux)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    TSC: PIT calibration confirmed by PMTIMER.
    TSC: using PIT calibration value
    Detected 697.409 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 514248k/524224k available (2151k kernel code, 9460k reserved, 844k data, 288k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
    lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
    .init : 0xc03f3000 - 0xc043b000 ( 288 kB)
    .data : 0xc0319f76 - 0xc03ed360 ( 844 kB)
    .text : 0xc0100000 - 0xc0319f76 (2151 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay loop (skipped), value calculated using timer frequency.. 1395.93 BogoMIPS (lpj=2324696)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20080609
    ACPI: Checking initramfs for custom DSDT
    ACPI: setting ELCR to 0200 (from 0e00)
    weird, boot CPU (#0) not listedby the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (1395.93 BogoMIPS).
    net_namespace: 832 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
    PCI: Using configuration type 1 for base access
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: 0000:00:00.0 reg 10 32bit mmio: [f4000000, f7ffffff]
    PCI: 0000:00:02.0 reg 10 32bit mmio: [50000000, 50000fff]
    pci 0000:00:02.0: supports D1
    pci 0000:00:02.0: supports D2
    pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.0: PME# disabled
    PCI: 0000:00:02.1 reg 10 32bit mmio: [50100000, 50100fff]
    pci 0000:00:02.1: supports D1
    pci 0000:00:02.1: supports D2
    pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.1: PME# disabled
    PCI: 0000:00:03.0 reg 10 32bit mmio: [f0120000, f0120fff]
    PCI: 0000:00:03.0 reg 14 io port: [1800, 183f]
    PCI: 0000:00:03.0 reg 18 32bit mmio: [f0100000, f011ffff]
    PCI: 0000:00:03.0 reg 30 32bit mmio: [0, fffff]
    pci 0000:00:03.0: supports D1
    pci 0000:00:03.0: supports D2
    pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:03.0: PME# disabled
    PCI: 0000:00:03.1 reg 10 io port: [1840, 1847]
    PCI: 0000:00:03.1 reg 14 32bit mmio: [f0121000, f0121fff]
    pci 0000:00:03.1: supports D1
    pci 0000:00:03.1: supports D2
    pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:03.1: PME# disabled
    PCI: 0000:00:05.0 reg 10 32bit mmio: [f0122000, f0122fff]
    PCI: 0000:00:05.0 reg 14 32bit mmio: [f0000000, f00fffff]
    pci 0000:00:05.0: supports D1
    pci 0000:00:05.0: supports D2
    PCI: 0000:00:07.1 reg 20 io port: [1850, 185f]
    PCI: 0000:00:07.2 reg 20 io port: [1860, 187f]
    pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
    pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
    pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
    pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
    pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
    PCI: 0000:01:00.0 reg 10 32bit mmio: [f8000000, fbffffff]
    PCI: 0000:01:00.0 reg 14 io port: [2000, 20ff]
    PCI: 0000:01:00.0 reg 18 32bit mmio: [f0200000, f0203fff]
    PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
    pci 0000:01:00.0: supports D1
    pci 0000:01:00.0: supports D2
    PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
    PCI: bridge 0000:00:01.0 32bit mmio: [f0200000, f02fffff]
    PCI: bridge 0000:00:01.0 32bit mmio pref: [f8000000, fbffffff]
    bus 00 -> node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
    ACPI: Power Resource [PSER] (off)
    ACPI: Power Resource [PSIO] (on)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
    PCI: setting IRQ 9 as level-triggered
    pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
    pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    pci 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
    pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
    system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x103f has been reserved
    system 00:02: ioport range 0x1040-0x104f has been reserved
    system 00:02: ioport range 0xfe00-0xfe0f has been reserved
    system 00:09: ioport range 0x15e0-0x15ef has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x2000-0x2fff
    pci 0000:00:01.0: MEM window: 0xf0200000-0xf02fffff
    pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff
    pci 0000:00:02.0: CardBus bridge, secondary bus 0000:02
    pci 0000:00:02.0: IO window: 0x001400-0x0014ff
    pci 0000:00:02.0: IO window: 0x001c00-0x001cff
    pci 0000:00:02.0: PREFETCH window: 0x30000000-0x33ffffff
    pci 0000:00:02.0: MEM window: 0x34000000-0x37ffffff
    pci 0000:00:02.1: CardBus bridge, secondary bus 0000:06
    pci 0000:00:02.1: IO window: 0x003000-0x0030ff
    pci 0000:00:02.1: IO window: 0x003400-0x0034ff
    pci 0000:00:02.1: PREFETCH window: 0x38000000-0x3bffffff
    pci 0000:00:02.1: MEM window: 0x3c000000-0x3fffffff
    pci 0000:00:02.0: power state changed by ACPI to D0
    pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    pci 0000:00:02.1: power state changed by ACPI to D0
    pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    bus: 00 index 0 io port: [0, ffff]
    bus: 00 index 1 mmio: [0, ffffffff]
    bus: 01 index 0 io port: [2000, 2fff]
    bus: 01 index 1 mmio: [f0200000, f02fffff]
    bus: 01 index 2 mmio: [f8000000, fbffffff]
    bus: 01 index 3 mmio: [0, 0]
    bus: 02 index 0 io port: [1400, 14ff]
    bus: 02 index 1 io port: [1c00, 1cff]
    bus: 02 index 2 mmio: [30000000, 33ffffff]
    bus: 02 index 3 mmio: [34000000, 37ffffff]
    bus: 06 index 0 io port: [3000, 30ff]
    bus: 06 index 1 io port: [3400, 34ff]
    bus: 06 index 2 mmio: [38000000, 3bffffff]
    bus: 06 index 3 mmio: [3c000000, 3fffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 714k freed
    Simple Boot Flag at 0x35 set to 0x1
    IBM machine detected. Enabling interrupts during APM calls.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1006
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
    pci 0000:01:00.0: Boot video device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver4 ports, IRQ sharing disabled
    serial 00:0c: activated
    00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 288k freed
    Switched to high resolution mode on CPU 0
    input: AT Translated Set 2 keyboard as /class/input/input1
    ACPI: ACPI Dock Station Driver
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:07.1: version 2.12
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
    ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
    ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
    ata1.00: 195371568 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/33
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    Driver 'sr' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ReiserFS: sda2: found reiserfs format "3.6" with standard journal
    ReiserFS: sda2: using ordered data mode
    ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda2: checking transaction log (sda2)
    ReiserFS: sda2: Using r5 hash to sort names
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    Non-volatile memory driver v1.2
    thinkpad_acpi: ThinkPad ACPI Extras v0.21
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
    Registered led device: tpacpi::thinklight
    thinkpad_acpi: another device driver is already handling bay events
    thinkpad_acpi: disabling subdriver bay
    Registered led device: tpacpi::power
    Registered led device: tpacpi:orange:batt
    Registered led device: tpacpi:green:batt
    Registered led device: tpacpi::dock_active
    Registered led device: tpacpi::bay_active
    Registered led device: tpacpi::dock_batt
    Registered led device: tpacpi::unknown_led
    Registered led device: tpacpi::standby
    input: ThinkPad Extra Buttons as /class/input/input2
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    e100 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    e100 0000:00:03.0: PME# disabled
    e100: eth0: e100_probe: addr 0xf0120000, irq 11, MAC addr 00:03:47:0f:de:3d
    eepro100.c:v1.09j-t 9/29/99 Donald Becker
    eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
    Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1864kHz
    Linux agpgart interface v0.103
    agpgart-intel 0000:00:00.0: Intel 440BX Chipset
    agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
    [drm] Initialized drm 1.1.0 20060810
    pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    [drm] Initialized r128 2.5.0 20030725 on minor 0
    ath_hal: module license 'Proprietary' taints kernel.
    AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    fuse init (API version 7.9)
    Marking TSC unstable due to cpufreq changes
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [LID]
    input: Sleep Button (CM) as /class/input/input5
    ACPI: Sleep Button (CM) [SLPB]
    Clocksource tsc unstable (delta = 142862504 ns)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI0007:00: registered as cooling_device0
    ACPI: Processor [CPU] (supports 8 throttling states)
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (34 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
    spurious 8259A interrupt: IRQ7.
    Yenta: ISA IRQ mask 0x00b8, PCI irq 9
    Socket status: 30000020
    Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
    Yenta: ISA IRQ mask 0x00b8, PCI irq 9
    Socket status: 30000006
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pccard: CardBus card inserted into slot 0
    PCI: 0000:02:00.0 reg 10 32bit mmio: [0, ffff]
    ath_pci 0000:02:00.0: enabling device (0000 -> 0002)
    ath_pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    input: PC Speaker as /class/input/input6
    USB Universal Host Controller Interface driver v3.0
    uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
    uhci_hcd 0000:00:07.2: UHCI Host Controller
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:07.2: irq 10, io base 0x00001860
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
    piix4_smbus: probe of 0000:00:07.3 failed with error -1
    Error: Driver 'pcspkr' is already registered, aborting...
    usb 1-1: new low speed USB device using uhci_hcd and address 2
    input: Video Bus as /class/input/input7
    usb 1-1: configuration #1 chosen from 1 choice
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /class/input/input8
    NET: Registered protocol family 23
    parport_pc 00:0d: activated
    parport_pc 00:0d: reported by Plug and Play ACPI
    parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
    nsc-ircc 00:0e: activated
    nsc-ircc, chip->init
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    IrDA: Registered device irda0
    nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
    PPP generic driver version 2.4.2
    MadWifi: ath_attach: Switching rfkill capability off.
    wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
    lp0: using parport0 (interrupt-driven).
    ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=9
    ppdev: user-space parallel port driver
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    usbcore: registered new interface driver hiddev
    input: Logitech Logitech USB Optical Mouse as /class/input/input9
    input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    JFS: nTxBlock = 4026, nTxLock = 32211
    Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
    warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    conservative governor failed, too long transition latency of HW, fallback to performance governor
    thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
    The strangest thing has also happened recently. The laptop refuses to use its own display when starting up in the dock unless an external monitor is plugged in. If a CRT is plugged in, the docked laptop starts up and shows the splash screen on its LCD. If no CRT is plugged in, turning on the docked laptop results in a blank screen. This might have happened because I fiddled with the BIOS which would make alot of sense but resetting the BIOS to default configuration hasn't fixed the problem. I also could have broken a pin but the last thing I remember doing before this happened is running cat /sys/module/snd_ac97_codec/parameters/power_save. It's one of those untouchable virtual files that causes a kernel oops when I try to read it sometimes. I have no idea how this would break the dock but it doesn't matter. Even if using the dock requires some external monitor jazz, I still want the card to be detected and it isn't.
    Sorry to bombard you with obscure information but I don't know where else to turn. I've asked on the thinkpad mailing list and IRC channel to no response and I've seen one other "knowledgeable person" mention these errors on the LKML. I will subscribe to that and ask him too. I'm just very surprised... this gave me the impression that what I wanted to do would work trivially and automatically on Linux and now I'm finding that it's broken for me and possibly every other Linux user. I will seek out thinkpad users from around here with all types of models and distros and see if they have any luck. So far Arch, Arch install CD and an ancient Ubuntu install CD don't work here. If anyone has this and can test it or can decipher some ideas from the posted output (new kernel parameters, new kernel config flags, new udev rules, new modules?) I'd really appreciate it.

  • Mobility Radeon 7500 OpenGL issues

    Whenever I attempt to use anything involving openGL, my CPU usage hits 100%. Complex openGL programs will drop to a framerate of less than 10, and sometimes crash Xorg.  How can I fix this?
    General system info:
    lspci
    00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04)
    00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04)
    00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
    00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 02)
    00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB Controller #3 (rev 02)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
    00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
    00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
    00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
    00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
    00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
    01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
    02:00.0 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
    02:00.1 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
    02:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
    02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
    lsmod
    Module Size Used by
    ipv6 279604 16
    oss_usb 106284 2
    oss_ich 18832 4
    osscore 552820 4 oss_usb,oss_ich
    ext2 68964 1
    fan 4448 0
    fuse 64856 2
    arc4 1756 2
    ecb 2812 2
    b43 137208 0
    radeon 666112 2
    ttm 37164 1 radeon
    joydev 10528 0
    drm 156160 4 radeon,ttm
    i2c_algo_bit 5888 1 radeon
    e100 34308 0
    ssb 45988 1 b43
    ppdev 7008 0
    yenta_socket 25384 2
    rsrc_nonstatic 12316 1 yenta_socket
    mii 4892 1 e100
    thinkpad_acpi 67988 0
    battery 10816 0
    nvram 6984 1 thinkpad_acpi
    video 20116 0
    output 2908 1 video
    pcmcia 36168 2 b43,ssb
    parport_pc 37060 1
    irtty_sir 5564 0
    sir_dev 11712 1 irtty_sir
    psmouse 60084 0
    ac 4224 0
    processor 36076 1
    iTCO_wdt 11072 0
    iTCO_vendor_support 3136 1 iTCO_wdt
    mac80211 155788 1 b43
    irda 126744 1 sir_dev
    crc_ccitt 1724 1 irda
    thermal 13912 0
    uhci_hcd 23692 0
    button 5612 0
    ehci_hcd 36620 0
    serio_raw 5792 0
    shpchp 34384 0
    intel_agp 28604 1
    lp 9732 0
    parport 34412 3 ppdev,parport_pc,lp
    evdev 10240 15
    cfg80211 90364 2 b43,mac80211
    pci_hotplug 28732 1 shpchp
    pcspkr 2492 0
    i2c_i801 9616 0
    i2c_core 21808 4 radeon,drm,i2c_algo_bit,i2c_i801
    rfkill 19696 2 thinkpad_acpi,cfg80211
    sg 27728 0
    agpgart 32660 3 ttm,drm,intel_agp
    led_class 4000 2 b43,thinkpad_acpi
    usbcore 154032 5 oss_usb,uhci_hcd,ehci_hcd
    pcmcia_core 35920 5 b43,ssb,yenta_socket,rsrc_nonstatic,pcmcia
    rtc_cmos 11344 0
    rtc_core 17976 1 rtc_cmos
    rtc_lib 2524 1 rtc_core
    ext4 334112 2
    mbcache 7104 2 ext2,ext4
    jbd2 82016 1 ext4
    crc16 1660 1 ext4
    sr_mod 16644 0
    cdrom 36032 1 sr_mod
    sd_mod 28344 5
    pata_acpi 4252 0
    ata_piix 23268 4
    ata_generic 4704 0
    libata 169548 3 pata_acpi,ata_piix,ata_generic
    floppy 56356 0
    scsi_mod 112468 4 sg,sr_mod,sd_mod,libata
    dmesg
    Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.2 (GCC) ) #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    NSC Geode by NSC
    Cyrix CyrixInstead
    Centaur CentaurHauls
    Transmeta GenuineTMx86
    Transmeta TransmetaCPU
    UMC UMC UMC UMC
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
    BIOS-e820: 000000003ff70000 - 000000003ff7e000 (ACPI data)
    BIOS-e820: 000000003ff7e000 - 000000003ff80000 (ACPI NVS)
    BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
    BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
    DMI present.
    last_pfn = 0x3ff70 max_arch_pfn = 0x100000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-CFFFF write-protect
    D0000-DBFFF uncachable
    DC000-DFFFF write-back
    E0000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask FC0000000 write-back
    1 base 03FF80000 mask FFFF80000 uncachable
    2 disabled
    3 disabled
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000002000 (usable)
    modified: 0000000000002000 - 0000000000006000 (reserved)
    modified: 0000000000006000 - 000000000009f000 (usable)
    modified: 000000000009f000 - 00000000000a0000 (reserved)
    modified: 00000000000dc000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 000000003ff70000 (usable)
    modified: 000000003ff70000 - 000000003ff7e000 (ACPI data)
    modified: 000000003ff7e000 - 000000003ff80000 (ACPI NVS)
    modified: 000000003ff80000 - 0000000040000000 (reserved)
    modified: 00000000ff800000 - 0000000100000000 (reserved)
    initial memory mapped : 0 - 01800000
    init_memory_mapping: 0000000000000000-00000000377fe000
    0000000000 - 0000400000 page 4k
    0000400000 - 0037400000 page 2M
    0037400000 - 00377fe000 page 4k
    kernel direct mapping tables up to 377fe000 @ 7000-c000
    RAMDISK: 3fea7000 - 3ff5fb2e
    Allocated new RAMDISK: 00100000 - 001b8b2e
    Move RAMDISK from 000000003fea7000 - 000000003ff5fb2d to 00100000 - 001b8b2d
    ACPI: RSDP 000f7010 00024 (v02 IBM )
    ACPI: XSDT 3ff731cd 0004C (v01 IBM TP-1I 00002080 LTP 00000000)
    ACPI: FACP 3ff73300 00081 (v01 IBM TP-1I 00002080 IBM 00000001)
    ACPI: DSDT 3ff733e7 0AAD5 (v01 IBM TP-1I 00002080 MSFT 0100000D)
    ACPI: FACS 3ff7f000 00040
    ACPI: SSDT 3ff733b4 00033 (v01 IBM TP-1I 00002080 MSFT 0100000D)
    ACPI: ECDT 3ff7debc 00052 (v01 IBM TP-1I 00002080 IBM 00000001)
    ACPI: TCPA 3ff7df0e 00032 (v01 IBM TP-1I 00002080 PTL 00000001)
    ACPI: BOOT 3ff7dfd8 00028 (v01 IBM TP-1I 00002080 LTP 00000001)
    135MB HIGHMEM available.
    887MB LOWMEM available.
    mapped low ram: 0 - 377fe000
    low ram: 0 - 377fe000
    node 0 low ram: 00000000 - 377fe000
    node 0 bootmap 00008000 - 0000ef00
    (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0001000000 - 000156da44] TEXT DATA BSS ==> [0001000000 - 000156da44]
    #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
    #5 [000156e000 - 0001574128] BRK ==> [000156e000 - 0001574128]
    #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
    #7 [0000100000 - 00001b8b2e] NEW RAMDISK ==> [0000100000 - 00001b8b2e]
    #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    Normal 0x00001000 -> 0x000377fe
    HighMem 0x000377fe -> 0x0003ff70
    Movable zone start PFN for each node
    early_node_map[3] active PFN ranges
    0: 0x00000000 -> 0x00000002
    0: 0x00000006 -> 0x0000009f
    0: 0x00000100 -> 0x0003ff70
    On node 0 totalpages: 261899
    free_area_init_node: node 0, pgdat c141b740, node_mem_map c1575000
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3963 pages, LIFO batch:0
    Normal zone: 1744 pages used for memmap
    Normal zone: 221486 pages, LIFO batch:31
    HighMem zone: 271 pages used for memmap
    HighMem zone: 34403 pages, LIFO batch:7
    Using APIC driver default
    ACPI: PM-Timer IO Port: 0x1008
    SMP: Allowing 1 CPUs, 0 hotplug CPUs
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    APIC: disable apic facility
    nr_irqs_gsi: 16
    PM: Registered nosave memory: 0000000000002000 - 0000000000006000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    Allocating PCI resources starting at 40000000 (gap: 40000000:bf800000)
    NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
    PERCPU: Embedded 14 pages at c1d7a000, static data 34332 bytes
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259852
    Kernel command line: root=/dev/disk/by-uuid/ce79e597-2b00-4812-95b4-eda62758ab6c ro vga=792 nomodeset
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    Initializing HighMem for node 0 (000377fe:0003ff70)
    Memory: 1031828k/1048000k available (3111k kernel code, 15416k reserved, 1120k data, 416k init, 138696k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc1422000 - 0xc148a000 ( 416 kB)
    .data : 0xc1309ddd - 0xc1421ea8 (1120 kB)
    .text : 0xc1000000 - 0xc1309ddd (3111 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    NR_IRQS:512
    Fast TSC calibration using PIT
    Detected 2192.708 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Calibrating delay loop (skipped), value calculated using timer frequency.. 4387.14 BogoMIPS (lpj=7309026)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: Hyper-Threading is disabled
    mce: CPU supports 4 MCE banks
    ------------[ cut here ]------------
    WARNING: at arch/x86/kernel/apic/apic.c:247 native_apic_write_dummy+0x4b/0x60()
    Hardware name: 236686U
    Modules linked in:
    Pid: 0, comm: swapper Not tainted 2.6.31-ARCH #1
    Call Trace:
    [<c10464da>] ? warn_slowpath_common+0x7a/0xc0
    [<c101f2ab>] ? native_apic_write_dummy+0x4b/0x60
    [<c1046540>] ? warn_slowpath_null+0x20/0x40
    [<c101f2ab>] ? native_apic_write_dummy+0x4b/0x60
    [<c1016601>] ? intel_init_thermal+0xd1/0x1d0
    [<c10149c3>] ? mce_init+0xc3/0xf0
    [<c10ed693>] ? __kmalloc+0x93/0x210
    [<c1015bc5>] ? mce_intel_feature_init+0x15/0x70
    [<c13014ed>] ? mcheck_init+0x261/0x2b5
    [<c12ff55a>] ? identify_cpu+0x377/0x386
    [<c10ecabf>] ? kmem_cache_alloc+0x6f/0x170
    [<c1429dc9>] ? identify_boot_cpu+0xa/0x1e
    [<c1429f90>] ? check_bugs+0x14/0x108
    [<c109add0>] ? __delayacct_tsk_init+0x20/0x50
    [<c1422a31>] ? start_kernel+0x332/0x353
    [<c14224f0>] ? unknown_bootoption+0x0/0x1bd
    ---[ end trace a7919e7f17c0a725 ]---
    CPU0: Thermal monitoring enabled (TM1)
    Performance Counters: no PMU driver, software counters only.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 11k freed
    ACPI: Core revision 20090521
    ACPI: setting ELCR to 0200 (from 0800)
    weird, boot CPU (#0) not listed by the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (4387.14 BogoMIPS).
    CPU0 attaching NULL sched-domain.
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: EC description table is found, configuring boot EC
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: Power Resource [PUBS] (on)
    ACPI: ACPI Dock Station Driver: 3 docks/bays found
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff]
    pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
    pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
    pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
    pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
    pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
    pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
    pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
    pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
    pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f]
    pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
    pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
    pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
    pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
    pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
    pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
    pci 0000:01:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff]
    pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
    pci 0000:01:00.0: reg 18 32bit mmio: [0xd0100000-0xd010ffff]
    pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
    pci 0000:01:00.0: supports D1 D2
    pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
    pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd01fffff]
    pci 0000:00:01.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff]
    pci 0000:02:00.0: reg 10 32bit mmio: [0x50000000-0x50000fff]
    pci 0000:02:00.0: supports D1 D2
    pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:00.0: PME# disabled
    pci 0000:02:00.1: reg 10 32bit mmio: [0x51000000-0x51000fff]
    pci 0000:02:00.1: supports D1 D2
    pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:00.1: PME# disabled
    pci 0000:02:02.0: reg 10 32bit mmio: [0xd0200000-0xd0201fff]
    pci 0000:02:08.0: reg 10 32bit mmio: [0xd0202000-0xd0202fff]
    pci 0000:02:08.0: reg 14 io port: [0x8000-0x803f]
    pci 0000:02:08.0: supports D1 D2
    pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:08.0: PME# disabled
    pci 0000:00:1e.0: transparent bridge
    pci 0000:00:1e.0: bridge io port: [0x4000-0x8fff]
    pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xdfffffff]
    pci 0000:00:1e.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 13 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:00: iomem range 0x0-0x9ffff could not be reserved
    system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
    system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
    system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
    system 00:00: iomem range 0xcc000-0xcffff could not be reserved
    system 00:00: iomem range 0xdc000-0xdffff could not be reserved
    system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
    system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
    system 00:00: iomem range 0xe8000-0xebfff could not be reserved
    system 00:00: iomem range 0xec000-0xeffff could not be reserved
    system 00:00: iomem range 0xf0000-0xfffff could not be reserved
    system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
    system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x107f has been reserved
    system 00:02: ioport range 0x1180-0x11bf has been reserved
    system 00:02: ioport range 0x15e0-0x15ef has been reserved
    system 00:02: ioport range 0x1600-0x167f has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x3000-0x3fff
    pci 0000:00:01.0: MEM window: 0xd0100000-0xd01fffff
    pci 0000:00:01.0: PREFETCH window: 0xe8000000-0xefffffff
    pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03
    pci 0000:02:00.0: IO window: 0x004000-0x0040ff
    pci 0000:02:00.0: IO window: 0x004400-0x0044ff
    pci 0000:02:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
    pci 0000:02:00.0: MEM window: 0xd4000000-0xd7ffffff
    pci 0000:02:00.1: CardBus bridge, secondary bus 0000:07
    pci 0000:02:00.1: IO window: 0x004800-0x0048ff
    pci 0000:02:00.1: IO window: 0x004c00-0x004cff
    pci 0000:02:00.1: PREFETCH window: 0xf4000000-0xf7ffffff
    pci 0000:02:00.1: MEM window: 0xd8000000-0xdbffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:1e.0: IO window: 0x4000-0x8fff
    pci 0000:00:1e.0: MEM window: 0xd0200000-0xdfffffff
    pci 0000:00:1e.0: PREFETCH window: 0xf0000000-0xf7ffffff
    pci 0000:00:1e.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
    pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
    pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
    pci_bus 0000:01: resource 1 mem: [0xd0100000-0xd01fffff]
    pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xefffffff]
    pci_bus 0000:02: resource 0 io: [0x4000-0x8fff]
    pci_bus 0000:02: resource 1 mem: [0xd0200000-0xdfffffff]
    pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf7ffffff]
    pci_bus 0000:02: resource 3 io: [0x00-0xffff]
    pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
    pci_bus 0000:03: resource 0 io: [0x4000-0x40ff]
    pci_bus 0000:03: resource 1 io: [0x4400-0x44ff]
    pci_bus 0000:03: resource 2 pref mem [0xf0000000-0xf3ffffff]
    pci_bus 0000:03: resource 3 mem: [0xd4000000-0xd7ffffff]
    pci_bus 0000:07: resource 0 io: [0x4800-0x48ff]
    pci_bus 0000:07: resource 1 io: [0x4c00-0x4cff]
    pci_bus 0000:07: resource 2 pref mem [0xf4000000-0xf7ffffff]
    pci_bus 0000:07: resource 3 mem: [0xd8000000-0xdbffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs...
    Freeing initrd memory: 738k freed
    Simple Boot Flag at 0x35 set to 0x1
    IBM machine detected. Enabling interrupts during APM calls.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1259350175.183:1): initialized
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1746
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:01:00.0: Boot video device
    pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
    vesafb: framebuffer at 0xe8000000, mapped to 0xf8080000, using 4608k, total 16320k
    vesafb: mode is 1024x768x24, linelength=3072, pages=6
    vesafb: protected mode interface info at c000:5701
    vesafb: pmi: set display start = c00c5795, set palette = c00c57e1
    vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
    serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
    00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
    serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
    serial 0000:00:1f.6: PCI INT B disabled
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    Switched to high resolution mode on CPU 0
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 416k freed
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    Floppy drive(s): fd0 is 1.44M
    SCSI subsystem initialized
    FDC 0 is a National Semiconductor PC87306
    libata version 3.00 loaded.
    ata_piix 0000:00:1f.1: version 2.13
    ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    ata_piix 0000:00:1f.1: setting latency timer to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
    ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
    ata1.00: ATA-7: SAMSUNG MP0201H, YP200-06, max UDMA/100
    ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4240N, 0211, max UDMA/33
    ata1.00: 39179952 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/100
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA SAMSUNG MP0201H YP20 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4240N 0211 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 39179952 512-byte logical blocks: (20.0 GB/18.6 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    EXT4-fs (sda3): INFO: recovery required on readonly filesystem
    EXT4-fs (sda3): write access will be enabled during recovery
    EXT4-fs (sda3): barriers enabled
    kjournald2 starting: pid 500, dev sda3:8, commit interval 5 seconds
    EXT4-fs (sda3): delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs (sda3): orphan cleanup on readonly fs
    EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 212034
    EXT4-fs (sda3): 1 orphan inode deleted
    EXT4-fs (sda3): recovery complete
    EXT4-fs (sda3): mounted filesystem with ordered data mode
    rtc_cmos 00:06: RTC can wake from S4
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 114 bytes nvram
    udev: starting version 146
    intel_rng: FWH not detected
    Linux agpgart interface v0.103
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
    input: PC Speaker as /devices/platform/pcspkr/input/input2
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    agpgart-intel 0000:00:00.0: Intel 845G Chipset
    agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    cfg80211: Using static regulatory domain info
    cfg80211: Regulatory domain: US
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
    (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
    cfg80211: Calling CRDA for country: US
    lp: driver loaded but no devices found
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    ACPI: Power Button [PWRF]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (58 C)
    ACPI: Lid Switch [LID]
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
    ACPI: Sleep Button [SLPB]
    NET: Registered protocol family 23
    usb 2-2: new full speed USB device using uhci_hcd and address 2
    iTCO_vendor_support: vendor-support=0
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    Marking TSC unstable due to TSC halts in idle
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor LNXCPU:00: registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: AC Adapter [AC] (on-line)
    parport_pc 00:0b: reported by Plug and Play ACPI
    parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
    usb 2-2: configuration #1 chosen from 4 choices
    lp0: using parport0 (interrupt-driven).
    nsc-ircc, chip->init
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    nsc_ircc_open(), can't get iobase of 0x2f8
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    nsc_ircc_open(), can't get iobase of 0x2f8
    nsc-ircc 00:0c: disabled
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/device:04/input/input6
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    Non-volatile memory driver v1.3
    thinkpad_acpi: ThinkPad ACPI Extras v0.23
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 1IET69WW (2.08 ), EC 1IHT20WW-1.07
    ACPI: Battery Slot [BAT0] (battery present)
    Registered led device: tpacpi::thinklight
    Registered led device: tpacpi::power
    Registered led device: tpacpi::standby
    input: ThinkPad Extra Buttons as /devices/virtual/input/input7
    ppdev: user-space parallel port driver
    yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0512]
    yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
    yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
    yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21022, devctl 0x64
    e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
    serio: Synaptics pass-through port at isa0060/serio1/input0
    input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
    yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0438, PCI irq 11
    yenta_cardbus 0000:02:00.0: Socket status: 30000006
    yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff: clean.
    yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
    yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
    [drm] Initialized drm 1.1.0 20060810
    [drm] VGACON disable radeon kernel modesetting.
    pci 0000:01:00.0: power state changed by ACPI to D0
    pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
    [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
    ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
    e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
    e100 0000:02:08.0: PME# disabled
    e100: eth0: e100_probe: addr 0xd0202000, irq 11, MAC addr 00:0d:60:37:df:cb
    b43-pci-bridge 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
    yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0512]
    yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI
    yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI
    yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21022, devctl 0x64
    b43-phy0: Broadcom 4318 WLAN found (core revision 9)
    phy0: Selected rate control algorithm 'minstrel'
    Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ]
    yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x0438, PCI irq 11
    yenta_cardbus 0000:02:00.1: Socket status: 30000006
    yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
    pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x8fff: clean.
    yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
    yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
    fuse init (API version 7.12)
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
    pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
    pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
    pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
    pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
    psmouse serio2: ID: 10 00 64
    EXT4-fs (sda3): internal journal on sda3:8
    EXT4-fs (sda4): barriers enabled
    kjournald2 starting: pid 2051, dev sda4:8, commit interval 5 seconds
    EXT4-fs (sda4): internal journal on sda4:8
    EXT4-fs (sda4): delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs (sda4): mounted filesystem with ordered data mode
    Adding 265064k swap on /dev/sda2. Priority:-1 extents:1 across:265064k
    usb 2-2: USB disconnect, address 2
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
    Clocksource tsc unstable (delta = -78033180 ns)
    oss_ich 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
    usbcore: registered new interface driver oss_usb
    ttyS1: LSR safety check engaged!
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    agpgart-intel 0000:00:00.0: AGP 2.0 bridge
    agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
    pci 0000:01:00.0: putting AGP V2 device into 4x mode
    [drm] Setting GART location based on new memory map
    [drm] Loading R100 Microcode
    [drm] writeback test succeeded in 1 usecs
    b43 ssb0:0: firmware: requesting b43/ucode5.fw
    b43 ssb0:0: firmware: requesting b43/pcm5.fw
    b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
    b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
    b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
    Registered led device: b43-phy0::tx
    Registered led device: b43-phy0::rx
    Registered led device: b43-phy0::radio
    ADDRCONF(NETDEV_UP): wlan0: link is not ready
    wlan0: authenticate with AP 00:1e:e5:79:4e:41
    wlan0: authenticated
    wlan0: associate with AP 00:1e:e5:79:4e:41
    wlan0: RX AssocResp from 00:1e:e5:79:4e:41 (capab=0x11 status=0 aid=1)
    wlan0: associated
    ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    wlan0: no IPv6 routers present
    usb 2-2: new full speed USB device using uhci_hcd and address 3
    usb 2-2: configuration #1 chosen from 4 choices
    Consoledump from an openGL game:
    [nick@myhost nick]# tremulous
    tremulous 1.1.0 linux-x86 Mar 17 2009
    ----- FS_Startup -----
    Current search path:
    /root/.tremulous/base
    /opt/tremulous/base/vms-1.1.0.pk3 (4 files)
    /opt/tremulous/base/map-uncreation-1.1.0.pk3 (110 files)
    /opt/tremulous/base/map-tremor-1.1.0.pk3 (45 files)
    /opt/tremulous/base/map-transit-1.1.0.pk3 (135 files)
    /opt/tremulous/base/map-niveus-1.1.0.pk3 (134 files)
    /opt/tremulous/base/map-nexus6-1.1.0.pk3 (151 files)
    /opt/tremulous/base/map-karith-1.1.0.pk3 (118 files)
    /opt/tremulous/base/map-atcs-1.1.0.pk3 (87 files)
    /opt/tremulous/base/map-arachnid2-1.1.0.pk3 (67 files)
    /opt/tremulous/base/data-1.1.0.pk3 (1229 files)
    /opt/tremulous/base
    2080 files in pk3 files
    execing default.cfg
    couldn't exec autogen.cfg
    couldn't exec autoexec.cfg
    Hunk_Clear: reset the hunk ok
    ----- Client Initialization -----
    ----- Initializing Renderer ----
    ----- Client Initialization Complete -----
    ----- R_Init -----
    ------- Input Initialization -------
    Joystick is not active.
    ...loading libGL.so.1:
    Calling SDL_Init(SDL_INIT_VIDEO)...
    SDL_Init(SDL_INIT_VIDEO) passed.
    Initializing OpenGL display
    ...setting mode 3: 640 480
    Using 8/8/8 Color bits, 24 depth, 8 stencil display.
    GL_RENDERER: Mesa DRI R100 (RV200 4C57) 20090101 AGP 4x x86/MMX/SSE2 TCL
    Initializing OpenGL extensions
    ...GL_S3_s3tc not found
    ...ignoring GL_EXT_texture_env_add
    ...using GL_ARB_multitexture
    ...using GL_EXT_compiled_vertex_array
    GL_VENDOR: Tungsten Graphics, Inc.
    GL_RENDERER: Mesa DRI R100 (RV200 4C57) 20090101 AGP 4x x86/MMX/SSE2 TCL
    GL_VERSION: 1.3 Mesa 7.6
    GL_EXTENSIONS: GL_ARB_draw_buffers GL_ARB_imaging GL_ARB_multisample GL_ARB_multitexture GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_texture_rectangle GL_ARB_transpose_matrix GL_ARB_vertex_buffer_object GL_ARB_window_pos GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_logic_op GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_convolution GL_EXT_copy_texture GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_histogram GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_pixels GL_EXT_polygon_offset GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_stencil_wrap GL_EXT_subtexture GL_EXT_texture GL_EXT_texture3D GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_rectangle GL_EXT_vertex_array GL_APPLE_packed_pixels GL_ATI_texture_env_combine3 GL_ATI_texture_mirror_once GL_IBM_multimode_draw_arrays GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_MESA_ycbcr_texture GL_MESA_window_pos GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texture_rectangle GL_NV_texgen_reflection GL_OES_read_format GL_SGI_color_matrix GL_SGI_color_table GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_SUN_multi_draw_arrays
    GL_MAX_TEXTURE_SIZE: 2048
    GL_MAX_ACTIVE_TEXTURES_ARB: 3
    PIXELFORMAT: color(24-bits) Z(24-bit) stencil(8-bits)
    MODE: 3, 640 x 480 fullscreen hz:N/A
    GAMMA: hardware w/ 0 overbright bits
    CPU:
    rendering primitives: single glDrawElements
    texturemode: GL_LINEAR_MIPMAP_LINEAR
    picmip: 0
    texture bits: 0
    multitexture: enabled
    compiled vertex arrays: enabled
    texenv add: disabled
    compressed textures: disabled
    Initializing Shaders
    ...loading 'scripts/uncreation.shader'
    ...loading 'scripts/q3map2_tremor.shader'
    ...loading 'scripts/tremor.shader'
    ...loading 'scripts/transit.shader'
    ...loading 'scripts/niveus.shader'
    ...loading 'scripts/nexus6.shader'
    ...loading 'scripts/karith.shader'
    ...loading 'scripts/atcs.shader'
    ...loading 'scripts/arachnid2.shader'
    ...loading 'scripts/jetpack.shader'
    ...loading 'scripts/core.shader'
    ...loading 'scripts/flame.shader'
    ...loading 'scripts/misc.shader'
    ...loading 'scripts/common-trem.shader'
    ...loading 'scripts/titan.shader'
    ...loading 'scripts/water.shader'
    ...loading 'scripts/displays.shader'
    ...loading 'scripts/plant_life.shader'
    ...loading 'scripts/stasis.shader'
    ...loading 'scripts/booster.shader'
    ...loading 'scripts/eggpod.shader'
    ...loading 'scripts/medistat.shader'
    ...loading 'scripts/mgturret.shader'
    ...loading 'scripts/reactor.shader'
    ...loading 'scripts/telenode.shader'
    ...loading 'scripts/trapper.shader'
    ...loading 'scripts/overmind.shader'
    ...loading 'scripts/tesla.shader'
    ...loading 'scripts/dcc.shader'
    ...loading 'scripts/hive.shader'
    ...loading 'scripts/level2.shader'
    ...loading 'scripts/human.shader'
    ...loading 'scripts/null.shader'
    ...loading 'scripts/weapons.shader'
    ...loading 'scripts/conkit.shader'
    ...loading 'scripts/advckit.shader'
    ...loading 'scripts/psaw.shader'
    ...loading 'scripts/mdriver.shader'
    ...loading 'scripts/flamer.shader'
    ...loading 'scripts/crosshairs.shader'
    ...loading 'scripts/grenade.shader'
    ...loading 'scripts/splash.shader'
    ...loading 'scripts/marks.shader'
    ...loading 'scripts/sprites.shader'
    ...loading 'scripts/muzzleflashes.shader'
    ----- finished R_Init -----
    ------ Initializing Sound ------
    Initializing SDL audio driver...
    ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
    ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
    ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
    ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
    ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
    ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
    ALSA lib conf.c:4633:(snd_config_expand) Evaluate error: No such file or directory
    ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default
    SDL audio driver is "dsp".
    SDL_AudioSpec:
    Format: AUDIO_S16LSB
    Freq: 22050
    Samples: 512
    Channels: 2
    Starting SDL audio callback...
    SDL audio initialized.
    ----- Sound Info -----
    1 stereo
    16384 samples
    16 samplebits
    1 submission_chunk
    22050 speed
    0xa4241f8 dma buffer
    No background file.
    Sound intialization successful.
    Sound memory manager started
    Loading vm file vm/ui.qvm...
    ...which has vmMagic VM_MAGIC_VER2
    Loading 1075 jump table targets
    VM file ui compiled to 786313 bytes of code
    ui loaded in 4596672 bytes on the hunk
    UI menu load time = 705 milli seconds
    UI menu load time = 55 milli seconds
    UI menu load time = 51 milli seconds
    --- Common Initialization Complete ---
    Opening IP socket: localhost:30720
    Hostname: myhost.localdomain
    Alias: myhost
    IP: 127.0.0.1
    Started tty console (use +set ttycon 0 to disable)
    *********************************WARN_ONCE*********************************
    File radeon_tcl.c function radeon_run_tcl_render line 499
    Rendering was 734 commands larger than predicted size. We might overflow command buffer.
    ----- CL_Shutdown -----
    Closing SDL audio device...
    SDL audio device shut down.
    RE_Shutdown( 1 )
    ----- CL_Shutdown -----
    Shutdown tty console
    [nick@myhost nick]#
    Display all 3035 possibilities? (y or n)

    radionecrotic wrote:
    Has this always been the case for you or did you update recently and it started happening?  There appears to be some sort of conflict with some machines and new changes to the kernel to allow quicker mode setting.  See http://bbs.archlinux.org/viewtopic.php? … 47#p659347.  I had to add !radeon to my MODULES list in /etc/rc.conf to get X to even work at all.  I don't run anything that uses OpenGL so I don't know if it'll address your issue.
    You may also want to take a look at http://bbs.archlinux.org/viewtopic.php? … 20#p662920 and add intel_agp radeon (that's two modules, in that order) to your MODULES list.
    Well, I was having the graphical corruption issue in that first thread until I added the nomodeset boot flag. As for the modesetting, I think it directly conflicts with my boot flag, and without it, I get corruption. =/

  • Xorg - Intel GMA945 - Can't get it to work

    Hi,
    It's been quite some time now that i am trying to run my X server on my Macbook. The graphics processor is an Intel GMA945, I've tried all version of xf86-video-intel, with xorg.conf, without, with different settings and options in xorg.conf. Nothing works.
    In most cases with the most recent version of xf86-video-intel (git or testing/), I just get a grey/back screen with my cursor, which eventually freezes after some time. The whole system is not frozen I can still SSH, but the whole display is stuck. CTRL-ALT-F[1-9] won't work, the only thing I can do is reboot. With the driver version in extra/ it works most of the time, if I specify to the driver in my xorg.conf to use XAA (instead of EXA or UXA which simply won't launch). But that leads to miscellaneous problems, such as font scrambling, and random freezes etc. And when it works, with xcompmgr launched there are some issues.
    The funny thing is that I've been able to run the latest drivers with UXA, compositing, DRI2 and all (even played OpenGL games! \o/), but after a reboot it all went back to the old crap.
    I love Arch, I love linux, I love open source, but I'm sick of it not working T__T. I am not blaming anyone, I could go ahead and but I can understand better why people don't use it (:
    Thanks for any help

    I updated all graphics related packages to git versions. That is:
    intel-dri
    mesa
    libgl
    dri2proto
    glproto
    xf86-video-intel
    The only I got my X to launch without freezing was to add:
      Option        "DRI" "false"
    To the Device section.
    But this setup doesn't work properly. I get random freezes. I can still move the mouse and see the cursor moving on screen, but nothing else. Changing to a VT1 (CTRL ALT F1) or any other one, "un-freezes" the X server. And when I return to X I can see that things I typed had been taken into account. (For example while writing this message, it hanged, I continued typing some characters, and when I came back to X after doing the "un-freezing" thing, the things I typed were there).
    Also my fonts and others things like images (suck as the website icon on the firefox tab) get scrambled too.
    I tried without a xorg.conf, X launches but I can only see my cursor and a black screen. I can move the cursor but can't do anything else, like changing to another VT.
    Here are some informations:
    less /var/log/kernel.log
    Jul 9 22:26:38 rithmo kernel: Linux version 2.6.30-ARCH (root@LX-Laptop) (gcc version 4.4.0 20090526 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jun 19 21:25:17 UTC 2009
    Jul 9 22:26:38 rithmo kernel: KERNEL supported cpus:
    Jul 9 22:26:38 rithmo kernel: Intel GenuineIntel
    Jul 9 22:26:38 rithmo kernel: AMD AuthenticAMD
    Jul 9 22:26:38 rithmo kernel: NSC Geode by NSC
    Jul 9 22:26:38 rithmo kernel: Cyrix CyrixInstead
    Jul 9 22:26:38 rithmo kernel: Centaur CentaurHauls
    Jul 9 22:26:38 rithmo kernel: Transmeta GenuineTMx86
    Jul 9 22:26:38 rithmo kernel: Transmeta TransmetaCPU
    Jul 9 22:26:38 rithmo kernel: UMC UMC UMC UMC
    Jul 9 22:26:38 rithmo kernel: BIOS-provided physical RAM map:
    Jul 9 22:26:38 rithmo kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    Jul 9 22:26:38 rithmo kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    Jul 9 22:26:38 rithmo kernel: BIOS-e820: 00000000000ede00 - 0000000000100000 (reserved)
    Jul 9 22:26:38 rithmo kernel: BIOS-e820: 0000000000100000 - 000000007e0d0000 (usable)
    Jul 9 22:26:38 rithmo kernel: BIOS-e820: 000000007e0d0000 - 000000007e2d1000 (ACPI NVS)
    Jul 9 22:26:38 rithmo kernel: BIOS-e820: 000000007e2d1000 - 000000007eebf000 (ACPI data)
    Jul 9 22:26:38 rithmo kernel: BIOS-e820: 000000007eebf000 - 000000007eeef000 (ACPI NVS)
    Jul 9 22:26:38 rithmo kernel: BIOS-e820: 000000007eeef000 - 000000007ef00000 (ACPI data)
    Jul 9 22:26:38 rithmo kernel: BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved)
    Jul 9 22:26:38 rithmo kernel: BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    Jul 9 22:26:38 rithmo kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    Jul 9 22:26:38 rithmo kernel: BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    Jul 9 22:26:38 rithmo kernel: BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    Jul 9 22:26:38 rithmo kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    Jul 9 22:26:38 rithmo kernel: BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    Jul 9 22:26:38 rithmo kernel: DMI 2.4 present.
    Jul 9 22:26:38 rithmo kernel: last_pfn = 0x7e0d0 max_arch_pfn = 0x100000
    Jul 9 22:26:38 rithmo kernel: MTRR default type: uncachable
    Jul 9 22:26:38 rithmo kernel: MTRR fixed ranges enabled:
    Jul 9 22:26:38 rithmo kernel: 00000-9FFFF write-back
    Jul 9 22:26:38 rithmo kernel: A0000-BFFFF uncachable
    Jul 9 22:26:38 rithmo kernel: C0000-CFFFF write-protect
    Jul 9 22:26:38 rithmo kernel: D0000-DFFFF uncachable
    Jul 9 22:26:38 rithmo kernel: E0000-FFFFF write-protect
    Jul 9 22:26:38 rithmo kernel: MTRR variable ranges enabled:
    Jul 9 22:26:38 rithmo kernel: 0 base 0FFE00000 mask FFFE00000 write-protect
    Jul 9 22:26:38 rithmo kernel: 1 base 000000000 mask F80000000 write-back
    Jul 9 22:26:38 rithmo kernel: 2 base 07F000000 mask FFF000000 uncachable
    Jul 9 22:26:38 rithmo kernel: 3 base 07EF00000 mask FFFF00000 uncachable
    Jul 9 22:26:38 rithmo kernel: 4 disabled
    Jul 9 22:26:38 rithmo kernel: 5 disabled
    Jul 9 22:26:38 rithmo kernel: 6 disabled
    Jul 9 22:26:38 rithmo kernel: 7 disabled
    Jul 9 22:26:38 rithmo kernel: PAT not supported by CPU.
    Jul 9 22:26:38 rithmo kernel: e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
    Jul 9 22:26:38 rithmo kernel: Scanning 1 areas for low memory corruption
    Jul 9 22:26:38 rithmo kernel: modified physical RAM map:
    Jul 9 22:26:38 rithmo kernel: modified: 0000000000000000 - 0000000000002000 (usable)
    Jul 9 22:26:38 rithmo kernel: modified: 0000000000002000 - 0000000000006000 (reserved)
    Jul 9 22:26:38 rithmo kernel: modified: 0000000000006000 - 000000000009fc00 (usable)
    Jul 9 22:26:38 rithmo kernel: modified: 000000000009fc00 - 00000000000a0000 (reserved)
    Jul 9 22:26:38 rithmo kernel: modified: 00000000000ede00 - 0000000000100000 (reserved)
    Jul 9 22:26:38 rithmo kernel: modified: 0000000000100000 - 000000007e0d0000 (usable)
    Jul 9 22:26:38 rithmo kernel: modified: 000000007e0d0000 - 000000007e2d1000 (ACPI NVS)
    Jul 9 22:26:38 rithmo kernel: modified: 000000007e2d1000 - 000000007eebf000 (ACPI data)
    Jul 9 22:26:38 rithmo kernel: modified: 000000007eebf000 - 000000007eeef000 (ACPI NVS)
    Jul 9 22:26:38 rithmo kernel: modified: 000000007eeef000 - 000000007ef00000 (ACPI data)
    Jul 9 22:26:38 rithmo kernel: modified: 000000007ef00000 - 0000000080000000 (reserved)
    Jul 9 22:26:38 rithmo kernel: modified: 00000000e0000000 - 00000000f0000000 (reserved)
    Jul 9 22:26:38 rithmo kernel: modified: 00000000fec00000 - 00000000fec01000 (reserved)
    Jul 9 22:26:38 rithmo kernel: modified: 00000000fed14000 - 00000000fed1a000 (reserved)
    Jul 9 22:26:38 rithmo kernel: modified: 00000000fed1c000 - 00000000fed20000 (reserved)
    Jul 9 22:26:38 rithmo kernel: modified: 00000000fee00000 - 00000000fee01000 (reserved)
    Jul 9 22:26:38 rithmo kernel: modified: 00000000ffe00000 - 0000000100000000 (reserved)
    Jul 9 22:26:38 rithmo kernel: init_memory_mapping: 0000000000000000-00000000377fe000
    Jul 9 22:26:38 rithmo kernel: 0000000000 - 0000400000 page 4k
    Jul 9 22:26:38 rithmo kernel: 0000400000 - 0037400000 page 2M
    Jul 9 22:26:38 rithmo kernel: 0037400000 - 00377fe000 page 4k
    Jul 9 22:26:38 rithmo kernel: kernel direct mapping tables up to 377fe000 @ 7000-c000
    Jul 9 22:26:38 rithmo kernel: RAMDISK: 7e000000 - 7e0bff0b
    Jul 9 22:26:38 rithmo kernel: Allocated new RAMDISK: 0062a000 - 006e9f0b
    Jul 9 22:26:38 rithmo kernel: Move RAMDISK from 000000007e000000 - 000000007e0bff0a to 0062a000 - 006e9f0a
    Jul 9 22:26:38 rithmo kernel: ACPI: RSDP 000fe020 00024 (v02 APPLE )
    Jul 9 22:26:38 rithmo kernel: ACPI: XSDT 7eefd120 00074 (v01 APPLE Apple00 00000061 01000013)
    Jul 9 22:26:38 rithmo kernel: ACPI: FACP 7eefb000 000F4 (v03 APPLE Apple00 00000061 Loki 0000005F)
    Jul 9 22:26:38 rithmo kernel: ACPI: DSDT 7eef0000 04221 (v01 APPLE MacBook 00010001 INTL 20050309)
    Jul 9 22:26:38 rithmo kernel: ACPI: FACS 7eec1000 00040
    Jul 9 22:26:38 rithmo kernel: ACPI: HPET 7eefa000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
    Jul 9 22:26:38 rithmo kernel: ACPI: APIC 7eef9000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
    Jul 9 22:26:38 rithmo kernel: ACPI: MCFG 7eef8000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
    Jul 9 22:26:38 rithmo kernel: ACPI: ASF! 7eef7000 0009C (v32 APPLE Apple00 00000001 Loki 0000005F)
    Jul 9 22:26:38 rithmo kernel: ACPI: SBST 7eef6000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
    Jul 9 22:26:38 rithmo kernel: ACPI: ECDT 7eef5000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
    Jul 9 22:26:38 rithmo kernel: ACPI: SSDT 7eebc000 0064F (v01 APPLE SataPri 00001000 INTL 20050309)
    Jul 9 22:26:38 rithmo kernel: ACPI: SSDT 7eebb000 0069C (v01 APPLE SataSec 00001000 INTL 20050309)
    Jul 9 22:26:38 rithmo kernel: ACPI: SSDT 7eeef000 004DC (v01 APPLE CpuPm 00003000 INTL 20050309)
    Jul 9 22:26:38 rithmo kernel: ACPI: Local APIC address 0xfee00000
    Jul 9 22:26:38 rithmo kernel: 1128MB HIGHMEM available.
    Jul 9 22:26:38 rithmo kernel: 887MB LOWMEM available.
    Jul 9 22:26:38 rithmo kernel: mapped low ram: 0 - 377fe000
    Jul 9 22:26:38 rithmo kernel: low ram: 0 - 377fe000
    Jul 9 22:26:38 rithmo kernel: node 0 low ram: 00000000 - 377fe000
    Jul 9 22:26:38 rithmo kernel: node 0 bootmap 00008000 - 0000ef00
    Jul 9 22:26:38 rithmo kernel: (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
    Jul 9 22:26:38 rithmo kernel: #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    Jul 9 22:26:38 rithmo kernel: #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    Jul 9 22:26:38 rithmo kernel: #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    Jul 9 22:26:38 rithmo kernel: #3 [0000100000 - 0000626e44] TEXT DATA BSS ==> [0000100000 - 0000626e44]
    Jul 9 22:26:38 rithmo kernel: #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
    Jul 9 22:26:38 rithmo kernel: #5 [0000627000 - 000062920d] BRK ==> [0000627000 - 000062920d]
    Jul 9 22:26:38 rithmo kernel: #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
    Jul 9 22:26:38 rithmo kernel: #7 [000062a000 - 00006e9f0b] NEW RAMDISK ==> [000062a000 - 00006e9f0b]
    Jul 9 22:26:38 rithmo kernel: #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
    Jul 9 22:26:38 rithmo kernel: Zone PFN ranges:
    Jul 9 22:26:38 rithmo kernel: DMA 0x00000000 -> 0x00001000
    Jul 9 22:26:38 rithmo kernel: Normal 0x00001000 -> 0x000377fe
    Jul 9 22:26:38 rithmo kernel: HighMem 0x000377fe -> 0x0007e0d0
    Jul 9 22:26:38 rithmo kernel: Movable zone start PFN for each node
    Jul 9 22:26:38 rithmo kernel: early_node_map[3] active PFN ranges
    Jul 9 22:26:38 rithmo kernel: 0: 0x00000000 -> 0x00000002
    Jul 9 22:26:38 rithmo kernel: 0: 0x00000006 -> 0x0000009f
    Jul 9 22:26:38 rithmo kernel: 0: 0x00000100 -> 0x0007e0d0
    Jul 9 22:26:38 rithmo kernel: On node 0 totalpages: 516203
    Jul 9 22:26:38 rithmo kernel: free_area_init_node: node 0, pgdat c04c2380, node_mem_map c1000000
    Jul 9 22:26:38 rithmo kernel: DMA zone: 32 pages used for memmap
    Jul 9 22:26:38 rithmo kernel: DMA zone: 0 pages reserved
    Jul 9 22:26:38 rithmo kernel: DMA zone: 3963 pages, LIFO batch:0
    Jul 9 22:26:38 rithmo kernel: Normal zone: 1744 pages used for memmap
    Jul 9 22:26:38 rithmo kernel: Normal zone: 221486 pages, LIFO batch:31
    Jul 9 22:26:38 rithmo kernel: HighMem zone: 2258 pages used for memmap
    Jul 9 22:26:38 rithmo kernel: HighMem zone: 286720 pages, LIFO batch:31
    Jul 9 22:26:38 rithmo kernel: Using APIC driver default
    Jul 9 22:26:38 rithmo kernel: ACPI: PM-Timer IO Port: 0x408
    Jul 9 22:26:38 rithmo kernel: ACPI: Local APIC address 0xfee00000
    Jul 9 22:26:38 rithmo kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Jul 9 22:26:38 rithmo kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Jul 9 22:26:38 rithmo kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    Jul 9 22:26:38 rithmo kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    Jul 9 22:26:38 rithmo kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    Jul 9 22:26:38 rithmo kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    Jul 9 22:26:38 rithmo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Jul 9 22:26:38 rithmo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Jul 9 22:26:38 rithmo kernel: ACPI: IRQ0 used by override.
    Jul 9 22:26:38 rithmo kernel: ACPI: IRQ2 used by override.
    Jul 9 22:26:38 rithmo kernel: ACPI: IRQ9 used by override.
    Jul 9 22:26:38 rithmo kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
    Jul 9 22:26:38 rithmo kernel: Using ACPI (MADT) for SMP configuration information
    Jul 9 22:26:38 rithmo kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Jul 9 22:26:38 rithmo kernel: SMP: Allowing 2 CPUs, 0 hotplug CPUs
    Jul 9 22:26:38 rithmo kernel: nr_irqs_gsi: 24
    Jul 9 22:26:38 rithmo kernel: PM: Registered nosave memory: 0000000000002000 - 0000000000006000
    Jul 9 22:26:38 rithmo kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    Jul 9 22:26:38 rithmo kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000ee000
    Jul 9 22:26:38 rithmo kernel: PM: Registered nosave memory: 00000000000ee000 - 0000000000100000
    Jul 9 22:26:38 rithmo kernel: Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
    Jul 9 22:26:38 rithmo kernel: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    Jul 9 22:26:38 rithmo kernel: PERCPU: Embedded 11 pages at c1fd2000, static data 24444 bytes
    Jul 9 22:26:38 rithmo kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 512169
    Jul 9 22:26:38 rithmo kernel: Kernel command line: root=/dev/disk/by-uuid/d1739595-05b6-43fc-a83f-f859b06f9614 ro quiet vga=792 resume=/dev/sda3 3
    Jul 9 22:26:38 rithmo kernel: Enabling fast FPU save and restore... done.
    Jul 9 22:26:38 rithmo kernel: Enabling unmasked SIMD FPU exception support... done.
    Jul 9 22:26:38 rithmo kernel: Initializing CPU#0
    Jul 9 22:26:38 rithmo kernel: NR_IRQS:512
    Jul 9 22:26:38 rithmo kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
    Jul 9 22:26:38 rithmo kernel: Extended CMOS year: 2000
    Jul 9 22:26:38 rithmo kernel: Fast TSC calibration failed
    Jul 9 22:26:38 rithmo kernel: TSC: Unable to calibrate against PIT
    Jul 9 22:26:38 rithmo kernel: TSC: using PMTIMER reference calibration
    Jul 9 22:26:38 rithmo kernel: Detected 1830.868 MHz processor.
    Jul 9 22:26:38 rithmo kernel: Console: colour dummy device 80x25
    Jul 9 22:26:38 rithmo kernel: console [tty0] enabled
    Jul 9 22:26:38 rithmo kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Jul 9 22:26:38 rithmo kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Jul 9 22:26:38 rithmo kernel: Initializing HighMem for node 0 (000377fe:0007e0d0)
    Jul 9 22:26:38 rithmo kernel: Memory: 2040720k/2065216k available (2902k kernel code, 23172k reserved, 1051k data, 392k init, 1155912k highmem)
    Jul 9 22:26:38 rithmo kernel: virtual kernel memory layout:
    Jul 9 22:26:38 rithmo kernel: fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
    Jul 9 22:26:38 rithmo kernel: pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    Jul 9 22:26:38 rithmo kernel: vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    Jul 9 22:26:38 rithmo kernel: lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    Jul 9 22:26:38 rithmo kernel: .init : 0xc04e3000 - 0xc0545000 ( 392 kB)
    Jul 9 22:26:38 rithmo kernel: .data : 0xc03d599f - 0xc04dc6a8 (1051 kB)
    Jul 9 22:26:38 rithmo kernel: .text : 0xc0100000 - 0xc03d599f (2902 kB)
    Jul 9 22:26:38 rithmo kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
    Jul 9 22:26:38 rithmo kernel: SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Jul 9 22:26:38 rithmo kernel: hpet clockevent registered
    Jul 9 22:26:38 rithmo kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    Jul 9 22:26:38 rithmo kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3663.30 BogoMIPS (lpj=6102893)
    Jul 9 22:26:38 rithmo kernel: Security Framework initialized
    Jul 9 22:26:38 rithmo kernel: Mount-cache hash table entries: 512
    Jul 9 22:26:38 rithmo kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
    Jul 9 22:26:38 rithmo kernel: CPU: L2 cache: 2048K
    Jul 9 22:26:38 rithmo kernel: CPU: Physical Processor ID: 0
    Jul 9 22:26:38 rithmo kernel: CPU: Processor Core ID: 0
    Jul 9 22:26:38 rithmo kernel: Intel machine check architecture supported.
    Jul 9 22:26:38 rithmo kernel: Intel machine check reporting enabled on CPU#0.
    Jul 9 22:26:38 rithmo kernel: using mwait in idle threads.
    Jul 9 22:26:38 rithmo kernel: Checking 'hlt' instruction... OK.
    Jul 9 22:26:38 rithmo kernel: ACPI: Core revision 20090320
    Jul 9 22:26:38 rithmo kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Jul 9 22:26:38 rithmo kernel: CPU0: Genuine Intel(R) CPU 1400 @ 1.83GHz stepping 08
    Jul 9 22:26:38 rithmo kernel: Booting processor 1 APIC 0x1 ip 0x6000
    Jul 9 22:26:38 rithmo kernel: Initializing CPU#1
    Jul 9 22:26:38 rithmo kernel: Calibrating delay using timer specific routine.. 3663.35 BogoMIPS (lpj=6102967)
    Jul 9 22:26:38 rithmo kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
    Jul 9 22:26:38 rithmo kernel: CPU: L2 cache: 2048K
    Jul 9 22:26:38 rithmo kernel: CPU: Physical Processor ID: 0
    Jul 9 22:26:38 rithmo kernel: CPU: Processor Core ID: 1
    Jul 9 22:26:38 rithmo kernel: Intel machine check architecture supported.
    Jul 9 22:26:38 rithmo kernel: Intel machine check reporting enabled on CPU#1.
    Jul 9 22:26:38 rithmo kernel: CPU1: Genuine Intel(R) CPU 1400 @ 1.83GHz stepping 08
    Jul 9 22:26:38 rithmo kernel: checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Jul 9 22:26:38 rithmo kernel: Brought up 2 CPUs
    Jul 9 22:26:38 rithmo kernel: Total of 2 processors activated (7326.66 BogoMIPS).
    Jul 9 22:26:38 rithmo kernel: CPU0 attaching sched-domain:
    Jul 9 22:26:38 rithmo kernel: domain 0: span 0-1 level MC
    Jul 9 22:26:38 rithmo kernel: groups: 0 1
    Jul 9 22:26:38 rithmo kernel: CPU1 attaching sched-domain:
    Jul 9 22:26:38 rithmo kernel: domain 0: span 0-1 level MC
    Jul 9 22:26:38 rithmo kernel: groups: 1 0
    Jul 9 22:26:38 rithmo kernel: net_namespace: 1056 bytes
    Jul 9 22:26:38 rithmo kernel: Booting paravirtualized kernel on bare hardware
    Jul 9 22:26:38 rithmo kernel: NET: Registered protocol family 16
    Jul 9 22:26:38 rithmo kernel: ACPI: bus type pci registered
    Jul 9 22:26:38 rithmo kernel: PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    Jul 9 22:26:38 rithmo kernel: PCI: MCFG area at e0000000 reserved in E820
    Jul 9 22:26:38 rithmo kernel: PCI: Using MMCONFIG for extended config space
    Jul 9 22:26:38 rithmo kernel: PCI: Using configuration type 1 for base access
    Jul 9 22:26:38 rithmo kernel: bio: create slab <bio-0> at 0
    Jul 9 22:26:38 rithmo kernel: ACPI: EC: EC description table is found, configuring boot EC
    Jul 9 22:26:38 rithmo kernel: ACPI: EC: non-query interrupt received, switching to interrupt mode
    Jul 9 22:26:38 rithmo kernel: ACPI: BIOS _OSI(Linux) query ignored
    Jul 9 22:26:38 rithmo kernel: ACPI: Interpreter enabled
    Jul 9 22:26:38 rithmo kernel: ACPI: (supports S0 S3 S4 S5)
    Jul 9 22:26:38 rithmo kernel: ACPI: Using IOAPIC for interrupt routing
    Jul 9 22:26:38 rithmo kernel: ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    Jul 9 22:26:38 rithmo kernel: ACPI: EC: driver started in interrupt mode
    Jul 9 22:26:38 rithmo kernel: ACPI: No dock devices found.
    Jul 9 22:26:38 rithmo kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:02.0: reg 10 32bit mmio: [0x90380000-0x903fffff]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:02.0: reg 14 io port: [0x20f0-0x20f7]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:02.0: reg 18 32bit mmio: [0x80000000-0x8fffffff]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:02.0: reg 1c 32bit mmio: [0x90400000-0x9043ffff]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:02.1: reg 10 32bit mmio: [0x90300000-0x9037ffff]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:07.0: reg 10 32bit mmio: [0x90444000-0x90444fff]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1b.0: reg 10 64bit mmio: [0x90440000-0x90443fff]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1b.0: PME# disabled
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1c.0: PME# disabled
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1c.1: PME# disabled
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1d.0: reg 20 io port: [0x20a0-0x20bf]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1d.1: reg 20 io port: [0x2080-0x209f]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1d.2: reg 20 io port: [0x2060-0x207f]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1d.3: reg 20 io port: [0x2040-0x205f]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1d.7: reg 10 32bit mmio: [0x90445400-0x904457ff]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1d.7: PME# disabled
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 0003)
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1f.1: reg 10 io port: [0x20e8-0x20ef]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1f.1: reg 14 io port: [0x2104-0x2107]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1f.1: reg 18 io port: [0x20e0-0x20e7]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1f.1: reg 1c io port: [0x2100-0x2103]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1f.1: reg 20 io port: [0x20c0-0x20cf]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1f.2: reg 10 io port: [0x20d8-0x20df]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1f.2: reg 14 io port: [0x20fc-0x20ff]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1f.2: reg 18 io port: [0x20d0-0x20d7]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1f.2: reg 1c io port: [0x20f8-0x20fb]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1f.2: reg 20 io port: [0x2020-0x202f]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1f.2: reg 24 32bit mmio: [0x90445000-0x904453ff]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1f.2: PME# supported from D3hot
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1f.2: PME# disabled
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf]
    Jul 9 22:26:38 rithmo kernel: pci 0000:01:00.0: reg 10 64bit mmio: [0x90200000-0x90203fff]
    Jul 9 22:26:38 rithmo kernel: pci 0000:01:00.0: reg 18 io port: [0x1000-0x10ff]
    Jul 9 22:26:38 rithmo kernel: pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
    Jul 9 22:26:38 rithmo kernel: pci 0000:01:00.0: supports D1 D2
    Jul 9 22:26:38 rithmo kernel: pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    Jul 9 22:26:38 rithmo kernel: pci 0000:01:00.0: PME# disabled
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1c.0: bridge io port: [0x1000-0x1fff]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1c.0: bridge 32bit mmio: [0x90200000-0x902fffff]
    Jul 9 22:26:38 rithmo kernel: pci 0000:02:00.0: reg 10 64bit mmio: [0x90100000-0x9010ffff]
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1c.1: bridge 32bit mmio: [0x90100000-0x901fffff]
    Jul 9 22:26:38 rithmo kernel: pci 0000:03:03.0: reg 10 32bit mmio: [0x90000000-0x90000fff]
    Jul 9 22:26:38 rithmo kernel: pci 0000:03:03.0: supports D1 D2
    Jul 9 22:26:38 rithmo kernel: pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot
    Jul 9 22:26:38 rithmo kernel: pci 0000:03:03.0: PME# disabled
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1e.0: transparent bridge
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1e.0: bridge 32bit mmio: [0x90000000-0x900fffff]
    Jul 9 22:26:38 rithmo kernel: pci_bus 0000:00: on NUMA node 0
    Jul 9 22:26:38 rithmo kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    Jul 9 22:26:38 rithmo kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    Jul 9 22:26:38 rithmo kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    Jul 9 22:26:38 rithmo kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    Jul 9 22:26:38 rithmo kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    Jul 9 22:26:38 rithmo kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    Jul 9 22:26:38 rithmo kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    Jul 9 22:26:38 rithmo kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    Jul 9 22:26:38 rithmo kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    Jul 9 22:26:38 rithmo kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    Jul 9 22:26:38 rithmo kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    Jul 9 22:26:38 rithmo kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
    Jul 9 22:26:38 rithmo kernel: PCI: Using ACPI for IRQ routing
    Jul 9 22:26:38 rithmo kernel: NetLabel: Initializing
    Jul 9 22:26:38 rithmo kernel: NetLabel: domain hash size = 128
    Jul 9 22:26:38 rithmo kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Jul 9 22:26:38 rithmo kernel: NetLabel: unlabeled traffic allowed by default
    Jul 9 22:26:38 rithmo kernel: pnp: PnP ACPI init
    Jul 9 22:26:38 rithmo kernel: ACPI: bus type pnp registered
    Jul 9 22:26:38 rithmo kernel: pnp 00:08: io resource (0x1640-0x164f) overlaps 0000:00:1c.0 BAR 13 (0x1000-0x1fff), disabling
    Jul 9 22:26:38 rithmo kernel: pnp: PnP ACPI: found 10 devices
    Jul 9 22:26:38 rithmo kernel: ACPI: ACPI bus type pnp unregistered
    Jul 9 22:26:38 rithmo kernel: system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
    Jul 9 22:26:38 rithmo kernel: system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
    Jul 9 22:26:38 rithmo kernel: system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
    Jul 9 22:26:38 rithmo kernel: system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
    Jul 9 22:26:38 rithmo kernel: system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
    Jul 9 22:26:38 rithmo kernel: system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
    Jul 9 22:26:38 rithmo kernel: system 00:06: iomem range 0xfed00000-0xfed003ff has been reserved
    Jul 9 22:26:38 rithmo kernel: system 00:08: ioport range 0x680-0x6ef has been reserved
    Jul 9 22:26:38 rithmo kernel: system 00:08: ioport range 0x800-0x80f has been reserved
    Jul 9 22:26:38 rithmo kernel: system 00:08: ioport range 0x810-0x817 has been reserved
    Jul 9 22:26:38 rithmo kernel: system 00:08: ioport range 0x400-0x47f has been reserved
    Jul 9 22:26:38 rithmo kernel: system 00:08: ioport range 0x500-0x53f has been reserved
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1c.0: IO window: 0x1000-0x1fff
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1c.0: MEM window: 0x90200000-0x902fffff
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1c.0: PREFETCH window: 0x00000090500000-0x000000905fffff
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1c.1: IO window: disabled
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1c.1: MEM window: 0x90100000-0x901fffff
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1c.1: PREFETCH window: disabled
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1e.0: IO window: disabled
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1e.0: MEM window: 0x90000000-0x900fffff
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1e.0: PREFETCH window: disabled
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1c.0: setting latency timer to 64
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1c.1: setting latency timer to 64
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1e.0: power state changed by ACPI to D0
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:1e.0: setting latency timer to 64
    Jul 9 22:26:38 rithmo kernel: pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    Jul 9 22:26:38 rithmo kernel: pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    Jul 9 22:26:38 rithmo kernel: pci_bus 0000:01: resource 0 io: [0x1000-0x1fff]
    Jul 9 22:26:38 rithmo kernel: pci_bus 0000:01: resource 1 mem: [0x90200000-0x902fffff]
    Jul 9 22:26:38 rithmo kernel: pci_bus 0000:01: resource 2 pref mem [0x90500000-0x905fffff]
    Jul 9 22:26:38 rithmo kernel: pci_bus 0000:02: resource 1 mem: [0x90100000-0x901fffff]
    Jul 9 22:26:38 rithmo kernel: pci_bus 0000:03: resource 1 mem: [0x90000000-0x900fffff]
    Jul 9 22:26:38 rithmo kernel: pci_bus 0000:03: resource 3 io: [0x00-0xffff]
    Jul 9 22:26:38 rithmo kernel: pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
    Jul 9 22:26:38 rithmo kernel: NET: Registered protocol family 2
    Jul 9 22:26:38 rithmo kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    Jul 9 22:26:38 rithmo kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    Jul 9 22:26:38 rithmo kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    Jul 9 22:26:38 rithmo kernel: TCP: Hash tables configured (established 131072 bind 65536)
    Jul 9 22:26:38 rithmo kernel: TCP reno registered
    Jul 9 22:26:38 rithmo kernel: NET: Registered protocol family 1
    Jul 9 22:26:38 rithmo kernel: Unpacking initramfs...
    Jul 9 22:26:38 rithmo kernel: Freeing initrd memory: 767k freed
    Jul 9 22:26:38 rithmo kernel: apm: BIOS not found.
    Jul 9 22:26:38 rithmo kernel: Scanning for low memory corruption every 60 seconds
    Jul 9 22:26:38 rithmo kernel: audit: initializing netlink socket (disabled)
    Jul 9 22:26:38 rithmo kernel: type=2000 audit(1247192786.346:1): initialized
    Jul 9 22:26:38 rithmo kernel: highmem bounce pool size: 64 pages
    Jul 9 22:26:38 rithmo kernel: VFS: Disk quotas dquot_6.5.2
    Jul 9 22:26:38 rithmo kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Jul 9 22:26:38 rithmo kernel: msgmni has been set to 1731
    Jul 9 22:26:38 rithmo kernel: alg: No test for stdrng (krng)
    Jul 9 22:26:38 rithmo kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    Jul 9 22:26:38 rithmo kernel: io scheduler noop registered
    Jul 9 22:26:38 rithmo kernel: io scheduler anticipatory registered
    Jul 9 22:26:38 rithmo kernel: io scheduler deadline registered
    Jul 9 22:26:38 rithmo kernel: io scheduler cfq registered (default)
    Jul 9 22:26:38 rithmo kernel: pci 0000:00:02.0: Boot video device
    Jul 9 22:26:38 rithmo kernel: pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
    Jul 9 22:26:38 rithmo kernel: pcieport-driver 0000:00:1c.0: setting latency timer to 64
    Jul 9 22:26:38 rithmo kernel: pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
    Jul 9 22:26:38 rithmo kernel: pcieport-driver 0000:00:1c.1: setting latency timer to 64
    Jul 9 22:26:38 rithmo kernel: vesafb: framebuffer at 0x80000000, mapped to 0xf8080000, using 6144k, total 16064k
    Jul 9 22:26:38 rithmo kernel: vesafb: mode is 1024x768x32, linelength=4096, pages=4
    Jul 9 22:26:38 rithmo kernel: vesafb: scrolling: redraw
    Jul 9 22:26:38 rithmo kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Jul 9 22:26:38 rithmo kernel: Console: switching to colour frame buffer device 128x48
    Jul 9 22:26:38 rithmo kernel: fb0: VESA VGA frame buffer device
    Jul 9 22:26:38 rithmo kernel: efifb: dmi detected MacBook1,1 - framebuffer at 80000000 (1280x800, stride 8192)
    Jul 9 22:26:38 rithmo kernel: isapnp: Scanning for PnP cards...
    Jul 9 22:26:38 rithmo kernel: Switched to high resolution mode on CPU 1
    Jul 9 22:26:38 rithmo kernel: Switched to high resolution mode on CPU 0
    Jul 9 22:26:38 rithmo kernel: isapnp: No Plug & Play device found
    Jul 9 22:26:38 rithmo kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Jul 9 22:26:38 rithmo kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input0
    Jul 9 22:26:38 rithmo kernel: PNP: No PS/2 controller found. Probing ports directly.
    Jul 9 22:26:38 rithmo kernel: i8042.c: No controller found.
    Jul 9 22:26:38 rithmo kernel: mice: PS/2 mouse device common for all mice
    Jul 9 22:26:38 rithmo kernel: cpuidle: using governor ladder
    Jul 9 22:26:38 rithmo kernel: cpuidle: using governor menu
    Jul 9 22:26:38 rithmo kernel: TCP cubic registered
    Jul 9 22:26:38 rithmo kernel: NET: Registered protocol family 17
    Jul 9 22:26:38 rithmo kernel: Using IPI No-Shortcut mode
    Jul 9 22:26:38 rithmo kernel: registered taskstats version 1
    Jul 9 22:26:38 rithmo kernel: Initalizing network drop monitor service
    Jul 9 22:26:38 rithmo kernel: Freeing unused kernel memory: 392k freed
    Jul 9 22:26:38 rithmo kernel: SCSI subsystem initialized
    Jul 9 22:26:38 rithmo kernel: libata version 3.00 loaded.
    Jul 9 22:26:38 rithmo kernel: pata_acpi 0000:00:1f.1: power state changed by ACPI to D0
    Jul 9 22:26:38 rithmo kernel: pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    Jul 9 22:26:38 rithmo kernel: pata_acpi 0000:00:1f.1: setting latency timer to 64
    Jul 9 22:26:38 rithmo kernel: pata_acpi 0000:00:1f.1: PCI INT A disabled
    Jul 9 22:26:38 rithmo kernel: pata_acpi 0000:00:1f.2: enabling device (0005 -> 0007)
    Jul 9 22:26:38 rithmo kernel: pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Jul 9 22:26:38 rithmo kernel: pata_acpi 0000:00:1f.2: setting latency timer to 64
    Jul 9 22:26:38 rithmo kernel: pata_acpi 0000:00:1f.2: PCI INT B disabled
    Jul 9 22:26:38 rithmo kernel: ata_piix 0000:00:1f.1: version 2.13
    Jul 9 22:26:38 rithmo kernel: ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    Jul 9 22:26:38 rithmo kernel: ata_piix 0000:00:1f.1: setting latency timer to 64
    Jul 9 22:26:38 rithmo kernel: scsi0 : ata_piix
    Jul 9 22:26:38 rithmo kernel: scsi1 : ata_piix
    Jul 9 22:26:38 rithmo kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x20c0 irq 14
    Jul 9 22:26:38 rithmo kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x20c8 irq 15
    Jul 9 22:26:38 rithmo kernel: ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Jul 9 22:26:38 rithmo kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
    Jul 9 22:26:38 rithmo kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
    Jul 9 22:26:38 rithmo kernel: scsi2 : ata_piix
    Jul 9 22:26:38 rithmo kernel: scsi3 : ata_piix
    Jul 9 22:26:38 rithmo kernel: ata3: SATA max UDMA/133 cmd 0x20d8 ctl 0x20fc bmdma 0x2020 irq 19
    Jul 9 22:26:38 rithmo kernel: ata4: SATA max UDMA/133 cmd 0x20d0 ctl 0x20f8 bmdma 0x2028 irq 19
    Jul 9 22:26:38 rithmo kernel: ata1.00: ATAPI: MATSHITACD-RW CW-8221, GA0J, max UDMA/33
    Jul 9 22:26:38 rithmo kernel: ata1.00: configured for UDMA/33
    Jul 9 22:26:38 rithmo kernel: scsi 0:0:0:0: CD-ROM MATSHITA CD-RW CW-8221 GA0J PQ: 0 ANSI: 5
    Jul 9 22:26:38 rithmo kernel: ata3.01: ATA-8: SAMSUNG HM500LI, 2TF00_00, max UDMA7
    Jul 9 22:26:38 rithmo kernel: ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    Jul 9 22:26:38 rithmo kernel: ata3.01: configured for UDMA/133
    Jul 9 22:26:38 rithmo kernel: scsi 2:0:1:0: Direct-Access ATA SAMSUNG HM500LI 2TF0 PQ: 0 ANSI: 5
    Jul 9 22:26:38 rithmo kernel: usbcore: registered new interface driver usbfs
    Jul 9 22:26:38 rithmo kernel: usbcore: registered new interface driver hub
    Jul 9 22:26:38 rithmo kernel: usbcore: registered new device driver usb
    Jul 9 22:26:38 rithmo kernel: Driver 'sd' needs updating - please use bus_type methods
    Jul 9 22:26:38 rithmo kernel: sd 2:0:1:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
    Jul 9 22:26:38 rithmo kernel: sd 2:0:1:0: [sda] Write Protect is off
    Jul 9 22:26:38 rithmo kernel: sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
    Jul 9 22:26:38 rithmo kernel: sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jul 9 22:26:38 rithmo kernel: sda:<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Jul 9 22:26:38 rithmo kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    Jul 9 22:26:38 rithmo kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
    Jul 9 22:26:38 rithmo kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
    Jul 9 22:26:38 rithmo kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    Jul 9 22:26:38 rithmo kernel: ehci_hcd 0000:00:1d.7: debug port 1
    Jul 9 22:26:38 rithmo kernel: ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    Jul 9 22:26:38 rithmo kernel: ehci_hcd 0000:00:1d.7: irq 21, io mem 0x90445400
    Jul 9 22:26:38 rithmo kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    Jul 9 22:26:38 rithmo kernel: usb usb1: configuration #1 chosen from 1 choice
    Jul 9 22:26:38 rithmo kernel: hub 1-0:1.0: USB hub found
    Jul 9 22:26:38 rithmo kernel: hub 1-0:1.0: 8 ports detected
    Jul 9 22:26:38 rithmo kernel: sda1 sda2 sda3 sda4
    Jul 9 22:26:38 rithmo kernel: sd 2:0:1:0: [sda] Attached SCSI disk
    Jul 9 22:26:38 rithmo kernel: uhci_hcd: USB Universal Host Controller Interface driver
    Jul 9 22:26:38 rithmo kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    Jul 9 22:26:38 rithmo kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
    Jul 9 22:26:38 rithmo kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
    Jul 9 22:26:38 rithmo kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    Jul 9 22:26:38 rithmo kernel: uhci_hcd 0000:00:1d.0: irq 21, io base 0x000020a0
    Jul 9 22:26:38 rithmo kernel: usb usb2: configuration #1 chosen from 1 choice
    Jul 9 22:26:38 rithmo kernel: hub 2-0:1.0: USB hub found
    Jul 9 22:26:38 rithmo kernel: hub 2-0:1.0: 2 ports detected
    Jul 9 22:26:38 rithmo kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Jul 9 22:26:38 rithmo kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
    Jul 9 22:26:38 rithmo kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
    Jul 9 22:26:38 rithmo kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    Jul 9 22:26:38 rithmo kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002080
    Jul 9 22:26:38 rithmo kernel: usb usb3: configuration #1 chosen from 1 choice
    Jul 9 22:26:38 rithmo kernel: hub 3-0:1.0: USB hub found
    Jul 9 22:26:38 rithmo kernel: hub 3-0:1.0: 2 ports detected
    Jul 9 22:26:38 rithmo kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Jul 9 22:26:38 rithmo kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
    Jul 9 22:26:38 rithmo kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
    Jul 9 22:26:38 rithmo kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    Jul 9 22:26:38 rithmo kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002060
    Jul 9 22:26:38 rithmo kernel: usb usb4: configuration #1 chosen from 1 choice
    Jul 9 22:26:38 rithmo kernel: hub 4-0:1.0: USB hub found
    Jul 9 22:26:38 rithmo kernel: hub 4-0:1.0: 2 ports detected
    Jul 9 22:26:38 rithmo kernel: uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    Jul 9 22:26:38 rithmo kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
    Jul 9 22:26:38 rithmo kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
    Jul 9 22:26:38 rithmo kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    Jul 9 22:26:38 rithmo kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002040
    Jul 9 22:26:38 rithmo kernel: usb usb5: configuration #1 chosen from 1 choice
    Jul 9 22:26:38 rithmo kernel: hub 5-0:1.0: USB hub found
    Jul 9 22:26:38 rithmo kernel: hub 5-0:1.0: 2 ports detected
    Jul 9 22:26:38 rithmo kernel: Driver 'sr' needs updating - please use bus_type methods
    Jul 9 22:26:38 rithmo kernel: sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    Jul 9 22:26:38 rithmo kernel: Uniform CD-ROM driver Revision: 3.20
    Jul 9 22:26:38 rithmo kernel: sr 0:0:0:0: Attached scsi CD-ROM sr0
    Jul 9 22:26:38 rithmo kernel: usb 1-4: new high speed USB device using ehci_hcd and address 4
    Jul 9 22:26:38 rithmo kernel: PM: Starting manual resume from disk
    Jul 9 22:26:38 rithmo kernel: kjournald starting. Commit interval 5 seconds
    Jul 9 22:26:38 rithmo kernel: EXT3-fs: mounted filesystem with writeback data mode.
    Jul 9 22:26:38 rithmo kernel: usb 1-4: configuration #1 chosen from 1 choice
    Jul 9 22:26:38 rithmo kernel: usb 2-2: new full speed USB device using uhci_hcd and address 2
    Jul 9 22:26:38 rithmo kernel: usb 2-2: configuration #1 chosen from 1 choice
    Jul 9 22:26:38 rithmo kernel: usb 3-1: new low speed USB device using uhci_hcd and address 2
    Jul 9 22:26:38 rithmo kernel: usb 3-1: configuration #1 chosen from 1 choice
    Jul 9 22:26:38 rithmo kernel: rtc_cmos 00:09: RTC can wake from S4
    Jul 9 22:26:38 rithmo kernel: rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
    Jul 9 22:26:38 rithmo kernel: rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    Jul 9 22:26:38 rithmo kernel: usb 4-2: new full speed USB device using uhci_hcd and address 2
    Jul 9 22:26:38 rithmo kernel: usb 4-2: configuration #1 chosen from 1 choice
    Jul 9 22:26:38 rithmo kernel: usb 5-1: new full speed USB device using uhci_hcd and address 2
    Jul 9 22:26:38 rithmo kernel: usb 5-1: configuration #1 chosen from 1 choice
    Jul 9 22:26:38 rithmo kernel: udev: starting version 141
    Jul 9 22:26:38 rithmo kernel: sky2 driver version 1.22
    Jul 9 22:26:38 rithmo kernel: sky2 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Jul 9 22:26:38 rithmo kernel: sky2 0000:01:00.0: setting latency timer to 64
    Jul 9 22:26:38 rithmo kernel: sky2 0000:01:00.0: Yukon-2 EC chip revision 2
    Jul 9 22:26:38 rithmo kernel: sky2 0000:01:00.0: irq 26 for MSI/MSI-X
    Jul 9 22:26:38 rithmo kernel: sky2 eth0: addr 00:17:f2:2d:06:51
    Jul 9 22:26:38 rithmo kernel: cfg80211: Using static regulatory domain info
    Jul 9 22:26:38 rithmo kernel: cfg80211: Regulatory domain: US
    Jul 9 22:26:38 rithmo kernel: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    Jul 9 22:26:38 rithmo kernel: (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
    Jul 9 22:26:38 rithmo kernel: (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    Jul 9 22:26:38 rithmo kernel: (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    Jul 9 22:26:38 rithmo kernel: (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    Jul 9 22:26:38 rithmo kernel: (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    Jul 9 22:26:38 rithmo kernel: (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
    Jul 9 22:26:38 rithmo kernel: cfg80211: Calling CRDA for country: US
    Jul 9 22:26:38 rithmo kernel: ath5k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    Jul 9 22:26:38 rithmo kernel: ath5k 0000:02:00.0: setting latency timer to 64
    Jul 9 22:26:38 rithmo kernel: ath5k 0000:02:00.0: registered as 'phy0'
    Jul 9 22:26:38 rithmo kernel: phy0: Selected rate control algorithm 'minstrel'
    Jul 9 22:26:38 rithmo kernel: ath5k phy0: Atheros AR5414 chip found (MAC: 0xa3, PHY: 0x61)
    Jul 9 22:26:38 rithmo kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    Jul 9 22:26:38 rithmo kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64
    Jul 9 22:26:38 rithmo kernel: hda_codec: STAC922x, Apple subsys_id=106b0a00
    Jul 9 22:26:38 rithmo kernel: input: HDA Intel Line In at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input1
    Jul 9 22:26:38 rithmo kernel: input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input2
    Jul 9 22:26:38 rithmo kernel: input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input3
    Jul 9 22:26:38 rithmo kernel: Disabling lock debugging due to kernel taint
    Jul 9 22:26:38 rithmo kernel: ndiswrapper version 1.54 loaded (smp=yes, preempt=yes)
    Jul 9 22:26:38 rithmo kernel: usbcore: registered new interface driver ndiswrapper
    Jul 9 22:26:38 rithmo kernel: i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Jul 9 22:26:38 rithmo kernel: coretemp coretemp.0: Errata AE18 not fixed, update BIOS or microcode of the CPU!
    Jul 9 22:26:38 rithmo kernel: coretemp coretemp.1: Errata AE18 not fixed, update BIOS or microcode of the CPU!
    Jul 9 22:26:38 rithmo kernel: ACPI: SSDT 7eeb9c90 0022A (v01 APPLE Cpu0Ist 00003000 INTL 20050309)
    Jul 9 22:26:38 rithmo kernel: ACPI: SSDT 7eeb8c10 002C3 (v01 APPLE Cpu0Cst 00003001 INTL 20050309)
    Jul 9 22:26:38 rithmo kernel: Monitor-Mwait will be used to enter C-1 state
    Jul 9 22:26:38 rithmo kernel: Monitor-Mwait will be used to enter C-2 state
    Jul 9 22:26:38 rithmo kernel: Monitor-Mwait will be used to enter C-3 state
    Jul 9 22:26:38 rithmo kernel: Marking TSC unstable due to TSC halts in idle
    Jul 9 22:26:38 rithmo kernel: ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    Jul 9 22:26:38 rithmo kernel: processor ACPI_CPU:00: registered as cooling_device0
    Jul 9 22:26:38 rithmo kernel: ACPI: Processor [CPU0] (supports 8 throttling states)
    Jul 9 22:26:38 rithmo kernel: ACPI: SSDT 7eeb9f10 00087 (v01 APPLE Cpu1Ist 00003000 INTL 20050309)
    Jul 9 22:26:38 rithmo kernel: ACPI: SSDT 7eeb8f10 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20050309)
    Jul 9 22:26:38 rithmo kernel: ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    Jul 9 22:26:38 rithmo kernel: processor ACPI_CPU:01: registered as cooling_device1
    Jul 9 22:26:38 rithmo kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
    Jul 9 22:26:38 rithmo kernel: Linux video capture interface: v2.00
    Jul 9 22:26:38 rithmo kernel: usbcore: registered new interface driver uvcvideo
    Jul 9 22:26:38 rithmo kernel: USB Video Class driver (v0.1.0)
    Jul 9 22:26:38 rithmo kernel: fuse init (API version 7.11)
    Jul 9 22:26:38 rithmo kernel: ACPI: AC Adapter [ADP1] (on-line)
    Jul 9 22:26:38 rithmo kernel: ACPI: Battery Slot [BAT0] (battery present)
    Jul 9 22:26:38 rithmo kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    Jul 9 22:26:38 rithmo kernel: ACPI: Power Button [PWRF]
    Jul 9 22:26:38 rithmo kernel: input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
    Jul 9 22:26:38 rithmo kernel: ACPI: Lid Switch [LID0]
    Jul 9 22:26:38 rithmo kernel: input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
    Jul 9 22:26:38 rithmo kernel: ACPI: Power Button [PWRB]
    Jul 9 22:26:38 rithmo kernel: input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
    Jul 9 22:26:38 rithmo kernel: ACPI: Sleep Button [SLPB]
    Jul 9 22:26:38 rithmo kernel: Linux agpgart interface v0.103
    Jul 9 22:26:38 rithmo kernel: agpgart-intel 0000:00:00.0: Intel 945GM Chipset
    Jul 9 22:26:38 rithmo kernel: agpgart-intel 0000:00:00.0: detected 16124K stolen memory
    Jul 9 22:26:38 rithmo kernel: agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
    Jul 9 22:26:38 rithmo kernel: input: PC Speaker as /devices/platform/pcspkr/input/input8
    Jul 9 22:26:38 rithmo kernel: iTCO_vendor_support: vendor-support=0
    Jul 9 22:26:38 rithmo kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    Jul 9 22:26:38 rithmo kernel: iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
    Jul 9 22:26:38 rithmo kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    Jul 9 22:26:38 rithmo kernel: intel_rng: FWH not detected
    Jul 9 22:26:38 rithmo kernel: applesmc: Apple MacBook detected:
    Jul 9 22:26:38 rithmo kernel: applesmc: - Model with accelerometer
    Jul 9 22:26:38 rithmo kernel: applesmc: - Model without light sensors and backlight
    Jul 9 22:26:38 rithmo kernel: applesmc: - Model with 10 temperature sensors
    Jul 9 22:26:38 rithmo kernel: input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input9
    Jul 9 22:26:38 rithmo kernel: ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    Jul 9 22:26:38 rithmo kernel: applesmc: device successfully initialized (0xe0, 0x00).
    Jul 9 22:26:38 rithmo kernel: applesmc: device successfully initialized.
    Jul 9 22:26:38 rithmo kernel: applesmc: 1 fans found.
    Jul 9 22:26:38 rithmo kernel: tpm_inf_pnp 00:03: Found TPM with ID IFX0101
    Jul 9 22:26:38 rithmo kernel: tpm_inf_pnp 00:03: TPM found: config base 0x4e, data base 0x4700, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
    Jul 9 22:26:38 rithmo kernel: input: applesmc as /devices/platform/applesmc.768/input/input10
    Jul 9 22:26:38 rithmo kernel: applesmc: driver successfully loaded.
    Jul 9 22:26:38 rithmo kernel: appletouch: Geyser mode initialized.
    Jul 9 22:26:38 rithmo kernel: input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input11
    Jul 9 22:26:38 rithmo kernel: usbcore: registered new interface driver appletouch
    Jul 9 22:26:38 rithmo kernel: sr 0:0:0:0: Attached scsi generic sg0 type 5
    Jul 9 22:26:38 rithmo kernel: sd 2:0:1:0: Attached scsi generic sg1 type 0
    Jul 9 22:26:38 rithmo kernel: usbcore: registered new interface driver hiddev
    Jul 9 22:26:38 rithmo kernel: input: Razer Razer Diamondback Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input12
    Jul 9 22:26:38 rithmo kernel: generic-usb 0003:1532:0002.0003: input,hidraw0: USB HID v1.10 Mouse [Razer Razer Diamondback Optical Mouse] on usb-0000:00:1d.1-1/input0
    Jul 9 22:26:38 rithmo kernel: generic-usb 0003:05AC:8240.0004: hiddev0,hidraw1: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2/input0
    Jul 9 22:26:38 rithmo kernel: ohci1394 0000:03:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    Jul 9 22:26:38 rithmo kernel: input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input13
    Jul 9 22:26:38 rithmo kernel: generic-usb 0003:05AC:1000.0005: input,hidraw2: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0
    Jul 9 22:26:38 rithmo kernel: input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input14
    Jul 9 22:26:38 rithmo kernel: apple 0003:05AC:0218.0001: input,hidraw3: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input0
    Jul 9 22:26:38 rithmo kernel: input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input15
    Jul 9 22:26:38 rithmo kernel: apple 0003:05AC:0218.0002: input,hidraw4: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input2
    Jul 9 22:26:38 rithmo kernel: input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input16
    Jul 9 22:26:38 rithmo kernel: generic-usb 0003:05AC:1000.0006: input,hidraw5: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1
    Jul 9 22:26:38 rithmo kernel: usbcore: registered new interface driver usbhid
    Jul 9 22:26:38 rithmo kernel: usbhid: v2.6:USB HID core driver
    Jul 9 22:26:38 rithmo kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[90000000-900007ff] Max Packet=[2048] IR/IT contexts=[8/8]
    Jul 9 22:26:38 rithmo kernel: usb 1-4: firmware: requesting isight.fw
    Jul 9 22:26:38 rithmo kernel: usbcore: registered new interface driver isight_firmware
    Jul 9 22:26:38 rithmo kernel: usb 1-4: USB disconnect, address 4
    Jul 9 22:26:38 rithmo kernel: EXT3 FS on sda4, internal journal
    Jul 9 22:26:38 rithmo kernel: Adding 1953116k swap on /dev/sda3. Priority:-1 extents:1 across:1953116k
    Jul 9 22:26:38 rithmo kernel: Clocksource tsc unstable (delta = -290561024 ns)
    Jul 9 22:26:38 rithmo kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[0017f2fffe6b321e]
    Jul 9 22:26:38 rithmo kernel: usb 1-4: new high speed USB device using ehci_hcd and address 7
    Jul 9 22:26:38 rithmo kernel: usb 1-4: configuration #1 chosen from 1 choice
    Jul 9 22:26:38 rithmo kernel: uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
    Jul 9 22:26:38 rithmo kernel: uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
    Jul 9 22:26:49 rithmo kernel: wlan0: direct probe to AP 00:1f:33:ba:cf:90 try 1
    Jul 9 22:26:49 rithmo kernel: wlan0 direct probe responded
    Jul 9 22:26:49 rithmo kernel: wlan0: authenticate with AP 00:1f:33:ba:cf:90
    Jul 9 22:26:49 rithmo kernel: wlan0: authenticated
    Jul 9 22:26:49 rithmo kernel: wlan0: associate with AP 00:1f:33:ba:cf:90
    Jul 9 22:26:49 rithmo kernel: wlan0: RX AssocResp from 00:1f:33:ba:cf:90 (capab=0x411 status=0 aid=3)
    Jul 9 22:26:49 rithmo kernel: wlan0: associated
    Jul 9 22:27:32 rithmo kernel: [drm] Initialized drm 1.1.0 20060810
    Jul 9 22:27:32 rithmo kernel: pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Jul 9 22:27:32 rithmo kernel: pci 0000:00:02.0: setting latency timer to 64
    Jul 9 22:27:32 rithmo kernel: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    Jul 9 22:27:54 rithmo kernel: NET: Registered protocol family 10
    Jul 9 22:27:54 rithmo kernel: lo: Disabled Privacy Extensions
    Jul 9 22:28:05 rithmo kernel: wlan0: no IPv6 routers present
    Jul 9 22:35:27 rithmo kernel: ACPI: EC: GPE storm detected, transactions will use polling mode
    Xorg log will be in the next post (too long).
    Afaik, even when X fails to launch the window manager (the black screen with cursor state), the log file looks the same.
    Thanks for reading!

  • NODE GETTING EVICTED ?

    Hello All,
    We have a Two node production setup for RAC 11gR2 on VM. We are facing issue of frequent Node eviction. Node gets evicted atleast once a day, We have tried switching to Single node and stopped all the services on the another node. However, that node still get rebooted. . Please shed some light on the issue and provide some help,
    I am uploading logs from /var/logs /messages
    Sep  5 02:23:34 wmprddb1 kernel: imklog 5.8.10, log source = /proc/kmsg started.
    Sep  5 02:23:34 wmprddb1 rsyslogd: [origin software="rsyslogd" swVersion="5.8.10" x-pid="1553" x-info="http://www.rsyslog.com"] start
    Sep  5 02:23:34 wmprddb1 kernel: Initializing cgroup subsys cpuset
    Sep  5 02:23:34 wmprddb1 kernel: Initializing cgroup subsys cpu
    Sep  5 02:23:34 wmprddb1 kernel: Linux version 2.6.32-358.6.1.el6.x86_64 ([email protected]) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Fri Mar 29 16:51:51 EDT 2013
    Sep  5 02:23:34 wmprddb1 kernel: Command line: ro root=UUID=5a2261d9-fe14-4b3b-8f86-94426a33bccc clocksource=acpi_pm clocksource_failover=hpet rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
    Sep  5 02:23:34 wmprddb1 kernel: KERNEL supported cpus:
    Sep  5 02:23:34 wmprddb1 kernel:  Intel GenuineIntel
    Sep  5 02:23:34 wmprddb1 kernel:  AMD AuthenticAMD
    Sep  5 02:23:34 wmprddb1 kernel:  Centaur CentaurHauls
    Sep  5 02:23:34 wmprddb1 kernel: BIOS-provided physical RAM map:
    Sep  5 02:23:34 wmprddb1 kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    Sep  5 02:23:34 wmprddb1 kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    Sep  5 02:23:34 wmprddb1 kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    Sep  5 02:23:34 wmprddb1 kernel: BIOS-e820: 0000000000100000 - 00000000dfffe000 (usable)
    Sep  5 02:23:34 wmprddb1 kernel: BIOS-e820: 00000000dfffe000 - 00000000e0000000 (reserved)
    Sep  5 02:23:34 wmprddb1 kernel: BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
    Sep  5 02:23:34 wmprddb1 kernel: BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
    Sep  5 02:23:34 wmprddb1 kernel: BIOS-e820: 0000000100000000 - 000000101ff00000 (usable)
    Sep  5 02:23:34 wmprddb1 kernel: DMI 2.4 present.
    Sep  5 02:23:34 wmprddb1 kernel: SMBIOS version 2.4 @ 0xFDAB0
    Sep  5 02:23:34 wmprddb1 kernel: last_pfn = 0x101ff00 max_arch_pfn = 0x400000000
    Sep  5 02:23:34 wmprddb1 kernel: x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
    Sep  5 02:23:34 wmprddb1 kernel: last_pfn = 0xdfffe max_arch_pfn = 0x400000000
    Sep  5 02:23:34 wmprddb1 kernel: init_memory_mapping: 0000000000000000-00000000dfffe000
    Sep  5 02:23:34 wmprddb1 kernel: init_memory_mapping: 0000000100000000-000000101ff00000
    Sep  5 02:23:34 wmprddb1 kernel: RAMDISK: 3706f000 - 37fef992
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: RSDP 00000000000fd830 00014 (v00 BOCHS )
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: RSDT 00000000dfffe380 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: FACP 00000000dfffff80 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: DSDT 00000000dfffe3c0 011A9 (v01   BXPC   BXDSDT 00000001 INTL 20100528)
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: FACS 00000000dfffff40 00040
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: SSDT 00000000dffff6e0 00858 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: APIC 00000000dffff5b0 00090 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: HPET 00000000dffff570 00038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
    Sep  5 02:23:34 wmprddb1 kernel: Setting APIC routing to flat.
    Sep  5 02:23:34 wmprddb1 kernel: No NUMA configuration found
    Sep  5 02:23:34 wmprddb1 kernel: Faking a node at 0000000000000000-000000101ff00000
    Sep  5 02:23:34 wmprddb1 kernel: Bootmem setup node 0 0000000000000000-000000101ff00000
    Sep  5 02:23:34 wmprddb1 kernel:  NODE_DATA [000000000004a000 - 000000000007dfff]
    Sep  5 02:23:34 wmprddb1 kernel:  bootmap [0000000000100000 -  0000000000303fdf] pages 204
    Sep  5 02:23:34 wmprddb1 kernel: (8 early reservations) ==> bootmem [0000000000 - 101ff00000]
    Sep  5 02:23:34 wmprddb1 kernel:  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
    Sep  5 02:23:34 wmprddb1 kernel:  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
    Sep  5 02:23:34 wmprddb1 kernel:  #2 [0001000000 - 000201b0a4]    TEXT DATA BSS ==> [0001000000 - 000201b0a4]
    Sep  5 02:23:34 wmprddb1 kernel:  #3 [003706f000 - 0037fef992]          RAMDISK ==> [003706f000 - 0037fef992]
    Sep  5 02:23:34 wmprddb1 kernel:  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
    Sep  5 02:23:34 wmprddb1 kernel:  #5 [000201c000 - 000201c051]              BRK ==> [000201c000 - 000201c051]
    Sep  5 02:23:34 wmprddb1 kernel:  #6 [0000008000 - 000000c000]          PGTABLE ==> [0000008000 - 000000c000]
    Sep  5 02:23:34 wmprddb1 kernel:  #7 [000000c000 - 000004a000]          PGTABLE ==> [000000c000 - 000004a000]
    Sep  5 02:23:34 wmprddb1 kernel: found SMP MP-table at [ffff8800000fdad0] fdad0
    Sep  5 02:23:34 wmprddb1 kernel: Reserving 133MB of memory at 48MB for crashkernel (System RAM: 66047MB)
    Sep  5 02:23:34 wmprddb1 kernel: kvm-clock: Using msrs 4b564d01 and 4b564d00
    Sep  5 02:23:34 wmprddb1 kernel: kvm-clock: cpu 0, msr 0:1c25681, boot clock
    Sep  5 02:23:34 wmprddb1 kernel: Zone PFN ranges:
    Sep  5 02:23:34 wmprddb1 kernel:  DMA      0x00000001 -> 0x00001000
    Sep  5 02:23:34 wmprddb1 kernel:  DMA32    0x00001000 -> 0x00100000
    Sep  5 02:23:34 wmprddb1 kernel:  Normal   0x00100000 -> 0x0101ff00
    Sep  5 02:23:34 wmprddb1 kernel: Movable zone start PFN for each node
    Sep  5 02:23:34 wmprddb1 kernel: early_node_map[3] active PFN ranges
    Sep  5 02:23:34 wmprddb1 kernel:    0: 0x00000001 -> 0x0000009f
    Sep  5 02:23:34 wmprddb1 kernel:    0: 0x00000100 -> 0x000dfffe
    Sep  5 02:23:34 wmprddb1 kernel:    0: 0x00100000 -> 0x0101ff00
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: PM-Timer IO Port: 0xb008
    Sep  5 02:23:34 wmprddb1 kernel: Setting APIC routing to flat.
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    Sep  5 02:23:34 wmprddb1 kernel: IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
    Sep  5 02:23:34 wmprddb1 kernel: Using ACPI (MADT) for SMP configuration information
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Sep  5 02:23:34 wmprddb1 kernel: SMP: Allowing 4 CPUs, 0 hotplug CPUs
    Sep  5 02:23:34 wmprddb1 kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    Sep  5 02:23:34 wmprddb1 kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    Sep  5 02:23:34 wmprddb1 kernel: PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    Sep  5 02:23:34 wmprddb1 kernel: PM: Registered nosave memory: 00000000dfffe000 - 00000000e0000000
    Sep  5 02:23:34 wmprddb1 kernel: PM: Registered nosave memory: 00000000e0000000 - 00000000feffc000
    Sep  5 02:23:34 wmprddb1 kernel: PM: Registered nosave memory: 00000000feffc000 - 00000000ff000000
    Sep  5 02:23:34 wmprddb1 kernel: PM: Registered nosave memory: 00000000ff000000 - 00000000fffc0000
    Sep  5 02:23:34 wmprddb1 kernel: PM: Registered nosave memory: 00000000fffc0000 - 0000000100000000
    Sep  5 02:23:34 wmprddb1 kernel: Allocating PCI resources starting at e0000000 (gap: e0000000:1effc000)
    Sep  5 02:23:34 wmprddb1 kernel: Booting paravirtualized kernel on KVM
    Sep  5 02:23:34 wmprddb1 kernel: NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
    Sep  5 02:23:34 wmprddb1 kernel: PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94552 r8192 d24232 u524288
    Sep  5 02:23:34 wmprddb1 kernel: pcpu-alloc: s94552 r8192 d24232 u524288 alloc=1*2097152
    Sep  5 02:23:34 wmprddb1 kernel: pcpu-alloc: [0] 0 1 2 3
    Sep  5 02:23:34 wmprddb1 kernel: kvm-clock: cpu 0, msr 0:28216681, primary cpu clock
    Sep  5 02:23:34 wmprddb1 kernel: kvm-stealtime: cpu 0, msr 2820e840
    Sep  5 02:23:34 wmprddb1 kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16545530
    Sep  5 02:23:34 wmprddb1 kernel: Policy zone: Normal
    Sep  5 02:23:34 wmprddb1 kernel: Kernel command line: ro root=UUID=5a2261d9-fe14-4b3b-8f86-94426a33bccc clocksource=acpi_pm clocksource_failover=hpet rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=133M@0M  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
    Sep  5 02:23:34 wmprddb1 kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Sep  5 02:23:34 wmprddb1 kernel: Checking aperture...
    Sep  5 02:23:34 wmprddb1 kernel: No AGP bridge found
    Sep  5 02:23:34 wmprddb1 kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Sep  5 02:23:34 wmprddb1 kernel: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
    Sep  5 02:23:34 wmprddb1 kernel: software IO TLB at phys 0x20000000 - 0x24000000
    Sep  5 02:23:34 wmprddb1 kernel: Memory: 65951972k/67632128k available (5221k kernel code, 524688k absent, 1155468k reserved, 7120k data, 1264k init)
    Sep  5 02:23:34 wmprddb1 kernel: Hierarchical RCU implementation.
    Sep  5 02:23:34 wmprddb1 kernel: NR_IRQS:33024 nr_irqs:440
    Sep  5 02:23:34 wmprddb1 kernel: Console: colour VGA+ 80x25
    Sep  5 02:23:34 wmprddb1 kernel: console [tty0] enabled
    Sep  5 02:23:34 wmprddb1 kernel: allocated 268435456 bytes of page_cgroup
    Sep  5 02:23:34 wmprddb1 kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Sep  5 02:23:34 wmprddb1 kernel: Detected 2792.998 MHz processor.
    Sep  5 02:23:34 wmprddb1 kernel: Calibrating delay loop (skipped) preset value.. 5585.99 BogoMIPS (lpj=2792998)
    Sep  5 02:23:34 wmprddb1 kernel: pid_max: default: 32768 minimum: 301
    Sep  5 02:23:34 wmprddb1 kernel: Security Framework initialized
    Sep  5 02:23:34 wmprddb1 kernel: SELinux:  Initializing.
    Sep  5 02:23:34 wmprddb1 kernel: Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
    Sep  5 02:23:34 wmprddb1 kernel: Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
    Sep  5 02:23:34 wmprddb1 kernel: Mount-cache hash table entries: 256
    Sep  5 02:23:34 wmprddb1 kernel: Initializing cgroup subsys ns
    Sep  5 02:23:34 wmprddb1 kernel: Initializing cgroup subsys cpuacct
    Sep  5 02:23:34 wmprddb1 kernel: Initializing cgroup subsys memory
    Sep  5 02:23:34 wmprddb1 kernel: Initializing cgroup subsys devices
    Sep  5 02:23:34 wmprddb1 kernel: Initializing cgroup subsys freezer
    Sep  5 02:23:34 wmprddb1 kernel: Initializing cgroup subsys net_cls
    Sep  5 02:23:34 wmprddb1 kernel: Initializing cgroup subsys blkio
    Sep  5 02:23:34 wmprddb1 kernel: Initializing cgroup subsys perf_event
    Sep  5 02:23:34 wmprddb1 kernel: Initializing cgroup subsys net_prio
    Sep  5 02:23:34 wmprddb1 kernel: CPU: Physical Processor ID: 0
    Sep  5 02:23:34 wmprddb1 kernel: CPU: Processor Core ID: 0
    Sep  5 02:23:34 wmprddb1 kernel: mce: CPU supports 10 MCE banks
    Sep  5 02:23:34 wmprddb1 kernel: alternatives: switching to unfair spinlock
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: Core revision 20090903
    Sep  5 02:23:34 wmprddb1 kernel: ftrace: converting mcount calls to 0f 1f 44 00 00
    Sep  5 02:23:34 wmprddb1 kernel: ftrace: allocating 21432 entries in 85 pages
    Sep  5 02:23:34 wmprddb1 kernel: Enabling x2apic
    Sep  5 02:23:34 wmprddb1 kernel: Enabled x2apic
    Sep  5 02:23:34 wmprddb1 kernel: Setting APIC routing to physical x2apic
    Sep  5 02:23:34 wmprddb1 kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Sep  5 02:23:34 wmprddb1 kernel: CPU0: Intel(R) Xeon(R) CPU           X5560  @ 2.80GHz stepping 05
    Sep  5 02:23:34 wmprddb1 kernel: Performance Events: Nehalem events, Broken BIOS detected, complain to your hardware vendor.
    Sep  5 02:23:34 wmprddb1 kernel: [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 186 is 53003c)
    Sep  5 02:23:34 wmprddb1 kernel: Intel PMU driver.
    Sep  5 02:23:34 wmprddb1 kernel: CPUID marked event: 'bus cycles' unavailable
    Sep  5 02:23:34 wmprddb1 kernel: ... version:                2
    Sep  5 02:23:34 wmprddb1 kernel: ... bit width:              48
    Sep  5 02:23:34 wmprddb1 kernel: ... generic registers:      4
    Sep  5 02:23:34 wmprddb1 kernel: ... value mask:             0000ffffffffffff
    Sep  5 02:23:34 wmprddb1 kernel: ... max period:             000000007fffffff
    Sep  5 02:23:34 wmprddb1 kernel: ... fixed-purpose events:   3
    Sep  5 02:23:34 wmprddb1 kernel: ... event mask:             000000070000000f
    Sep  5 02:23:34 wmprddb1 kernel: NMI watchdog enabled, takes one hw-pmu counter.
    Sep  5 02:23:34 wmprddb1 kernel: Booting Node   0, Processors  #1
    Sep  5 02:23:34 wmprddb1 kernel: kvm-clock: cpu 1, msr 0:28296681, secondary cpu clock
    Sep  5 02:23:34 wmprddb1 kernel: kvm-stealtime: cpu 1, msr 2828e840
    Sep  5 02:23:34 wmprddb1 kernel: #2
    Sep  5 02:23:34 wmprddb1 kernel: kvm-clock: cpu 2, msr 0:28316681, secondary cpu clock
    Sep  5 02:23:34 wmprddb1 kernel: kvm-stealtime: cpu 2, msr 2830e840
    Sep  5 02:23:34 wmprddb1 kernel: #3 Ok.
    Sep  5 02:23:34 wmprddb1 kernel: kvm-clock: cpu 3, msr 0:28396681, secondary cpu clock
    Sep  5 02:23:34 wmprddb1 kernel: kvm-stealtime: cpu 3, msr 2838e840
    Sep  5 02:23:34 wmprddb1 kernel: Brought up 4 CPUs
    Sep  5 02:23:34 wmprddb1 kernel: Total of 4 processors activated (22343.98 BogoMIPS).
    Sep  5 02:23:34 wmprddb1 kernel: devtmpfs: initialized
    Sep  5 02:23:34 wmprddb1 kernel: regulator: core version 0.5
    Sep  5 02:23:34 wmprddb1 kernel: NET: Registered protocol family 16
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: bus type pci registered
    Sep  5 02:23:34 wmprddb1 kernel: PCI: Using configuration type 1 for base access
    Sep  5 02:23:34 wmprddb1 kernel: bio: create slab <bio-0> at 0
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: Interpreter enabled
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: (supports S0 S3 S4 S5)
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: Using IOAPIC for interrupt routing
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: No dock devices found.
    Sep  5 02:23:34 wmprddb1 kernel: HEST: Table not found.
    Sep  5 02:23:34 wmprddb1 kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Sep  5 02:23:34 wmprddb1 kernel: pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
    Sep  5 02:23:34 wmprddb1 kernel: pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
    Sep  5 02:23:34 wmprddb1 kernel: pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    Sep  5 02:23:34 wmprddb1 kernel: pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff]
    Sep  5 02:23:34 wmprddb1 kernel: pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
    Sep  5 02:23:34 wmprddb1 kernel: pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
    Sep  5 02:23:34 wmprddb1 kernel: vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    Sep  5 02:23:34 wmprddb1 kernel: vgaarb: loaded
    Sep  5 02:23:34 wmprddb1 kernel: vgaarb: bridge control possible 0000:00:02.0
    Sep  5 02:23:34 wmprddb1 kernel: SCSI subsystem initialized
    Sep  5 02:23:34 wmprddb1 kernel: usbcore: registered new interface driver usbfs
    Sep  5 02:23:34 wmprddb1 kernel: usbcore: registered new interface driver hub
    Sep  5 02:23:34 wmprddb1 kernel: usbcore: registered new device driver usb
    Sep  5 02:23:34 wmprddb1 kernel: PCI: Using ACPI for IRQ routing
    Sep  5 02:23:34 wmprddb1 kernel: NetLabel: Initializing
    Sep  5 02:23:34 wmprddb1 kernel: NetLabel:  domain hash size = 128
    Sep  5 02:23:34 wmprddb1 kernel: NetLabel:  protocols = UNLABELED CIPSOv4
    Sep  5 02:23:34 wmprddb1 kernel: NetLabel:  unlabeled traffic allowed by default
    Sep  5 02:23:34 wmprddb1 kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    Sep  5 02:23:34 wmprddb1 kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    Sep  5 02:23:34 wmprddb1 kernel: hpet0: 3 comparators, 64-bit 100.000000 MHz counter
    Sep  5 02:23:34 wmprddb1 kernel: Switching to clocksource kvm-clock
    Sep  5 02:23:34 wmprddb1 kernel: pnp: PnP ACPI init
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: bus type pnp registered
    Sep  5 02:23:34 wmprddb1 kernel: pnp: PnP ACPI: found 6 devices
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: ACPI bus type pnp unregistered
    Sep  5 02:23:34 wmprddb1 kernel: Override clocksource acpi_pm is not HRT compatible. Cannot switch while in HRT/NOHZ mode
    Sep  5 02:23:34 wmprddb1 kernel: NET: Registered protocol family 2
    Sep  5 02:23:34 wmprddb1 kernel: IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Sep  5 02:23:34 wmprddb1 kernel: TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    Sep  5 02:23:34 wmprddb1 kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    Sep  5 02:23:34 wmprddb1 kernel: TCP: Hash tables configured (established 524288 bind 65536)
    Sep  5 02:23:34 wmprddb1 kernel: TCP reno registered
    Sep  5 02:23:34 wmprddb1 kernel: NET: Registered protocol family 1
    Sep  5 02:23:34 wmprddb1 kernel: pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    Sep  5 02:23:34 wmprddb1 kernel: pci 0000:00:01.0: PIIX3: Enabling Passive Release
    Sep  5 02:23:34 wmprddb1 kernel: pci 0000:00:01.0: Activating ISA DMA hang workarounds
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    Sep  5 02:23:34 wmprddb1 kernel: pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
    Sep  5 02:23:34 wmprddb1 kernel: pci 0000:00:01.2: PCI INT D disabled
    Sep  5 02:23:34 wmprddb1 kernel: Trying to unpack rootfs image as initramfs...
    Sep  5 02:23:34 wmprddb1 kernel: Freeing initrd memory: 15874k freed
    Sep  5 02:23:34 wmprddb1 kernel: audit: initializing netlink socket (disabled)
    Sep  5 02:23:34 wmprddb1 kernel: type=2000 audit(1378365736.552:1): initialized
    Sep  5 02:23:34 wmprddb1 kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Sep  5 02:23:34 wmprddb1 kernel: VFS: Disk quotas dquot_6.5.2
    Sep  5 02:23:34 wmprddb1 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Sep  5 02:23:34 wmprddb1 kernel: msgmni has been set to 32768
    Sep  5 02:23:34 wmprddb1 kernel: alg: No test for stdrng (krng)
    Sep  5 02:23:34 wmprddb1 kernel: ksign: Installing public key data
    Sep  5 02:23:34 wmprddb1 kernel: Loading keyring
    Sep  5 02:23:34 wmprddb1 kernel: - Added public key CD7AEEA03C3767CE
    Sep  5 02:23:34 wmprddb1 kernel: - User ID: Red Hat, Inc. (Kernel Module GPG key)
    Sep  5 02:23:34 wmprddb1 kernel: - Added public key D4A26C9CCD09BEDA
    Sep  5 02:23:34 wmprddb1 kernel: - User ID: Red Hat Enterprise Linux Driver Update Program <[email protected]>
    Sep  5 02:23:34 wmprddb1 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
    Sep  5 02:23:34 wmprddb1 kernel: io scheduler noop registered
    Sep  5 02:23:34 wmprddb1 kernel: io scheduler anticipatory registered
    Sep  5 02:23:34 wmprddb1 kernel: io scheduler deadline registered
    Sep  5 02:23:34 wmprddb1 kernel: io scheduler cfq registered (default)
    Sep  5 02:23:34 wmprddb1 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Sep  5 02:23:34 wmprddb1 kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [3] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [4] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [5] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [6] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [7] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [8] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [9] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [10] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [11] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [12] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [13] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [14] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [15] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [16] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [17] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [18] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [19] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [20] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [21] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [22] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [23] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [24] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [25] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [26] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [27] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [28] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [29] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [30] registered
    Sep  5 02:23:34 wmprddb1 kernel: acpiphp: Slot [31] registered
    Sep  5 02:23:34 wmprddb1 kernel: ipmi message handler version 39.2
    Sep  5 02:23:34 wmprddb1 kernel: IPMI System Interface driver.
    Sep  5 02:23:34 wmprddb1 kernel: ipmi_si: Adding default-specified kcs state machine
    Sep  5 02:23:34 wmprddb1 kernel: ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
    Sep  5 02:23:34 wmprddb1 kernel: ipmi_si: Interface detection failed
    Sep  5 02:23:34 wmprddb1 kernel: ipmi_si: Adding default-specified smic state machine
    Sep  5 02:23:34 wmprddb1 kernel: ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
    Sep  5 02:23:34 wmprddb1 kernel: ipmi_si: Interface detection failed
    Sep  5 02:23:34 wmprddb1 kernel: ipmi_si: Adding default-specified bt state machine
    Sep  5 02:23:34 wmprddb1 kernel: ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
    Sep  5 02:23:34 wmprddb1 kernel: ipmi_si: Interface detection failed
    Sep  5 02:23:34 wmprddb1 kernel: ipmi_si: Unable to find any System Interface(s)
    Sep  5 02:23:34 wmprddb1 kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: Power Button [PWRF]
    Sep  5 02:23:34 wmprddb1 kernel: ERST: Table is not found!
    Sep  5 02:23:34 wmprddb1 kernel: GHES: HEST is not enabled!
    Sep  5 02:23:34 wmprddb1 kernel: Non-volatile memory driver v1.3
    Sep  5 02:23:34 wmprddb1 kernel: Linux agpgart interface v0.103
    Sep  5 02:23:34 wmprddb1 kernel: crash memory driver: version 1.1
    Sep  5 02:23:34 wmprddb1 kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    Sep  5 02:23:34 wmprddb1 kernel: brd: module loaded
    Sep  5 02:23:34 wmprddb1 kernel: loop: module loaded
    Sep  5 02:23:34 wmprddb1 kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input1
    Sep  5 02:23:34 wmprddb1 kernel: Fixed MDIO Bus: probed
    Sep  5 02:23:34 wmprddb1 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Sep  5 02:23:34 wmprddb1 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Sep  5 02:23:34 wmprddb1 kernel: uhci_hcd: USB Universal Host Controller Interface driver
    Sep  5 02:23:34 wmprddb1 kernel: uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
    Sep  5 02:23:34 wmprddb1 kernel: uhci_hcd 0000:00:01.2: UHCI Host Controller
    Sep  5 02:23:34 wmprddb1 kernel: uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
    Sep  5 02:23:34 wmprddb1 kernel: uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c0c0
    Sep  5 02:23:34 wmprddb1 kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
    Sep  5 02:23:34 wmprddb1 kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    Sep  5 02:23:34 wmprddb1 kernel: usb usb1: Product: UHCI Host Controller
    Sep  5 02:23:34 wmprddb1 kernel: usb usb1: Manufacturer: Linux 2.6.32-358.6.1.el6.x86_64 uhci_hcd
    Sep  5 02:23:34 wmprddb1 kernel: usb usb1: SerialNumber: 0000:00:01.2
    Sep  5 02:23:34 wmprddb1 kernel: usb usb1: configuration #1 chosen from 1 choice
    Sep  5 02:23:34 wmprddb1 kernel: hub 1-0:1.0: USB hub found
    Sep  5 02:23:34 wmprddb1 kernel: hub 1-0:1.0: 2 ports detected
    Sep  5 02:23:34 wmprddb1 kernel: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    Sep  5 02:23:34 wmprddb1 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Sep  5 02:23:34 wmprddb1 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
    Sep  5 02:23:34 wmprddb1 kernel: mice: PS/2 mouse device common for all mice
    Sep  5 02:23:34 wmprddb1 kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
    Sep  5 02:23:34 wmprddb1 kernel: rtc_cmos 00:01: RTC can wake from S4
    Sep  5 02:23:34 wmprddb1 kernel: rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    Sep  5 02:23:34 wmprddb1 kernel: rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
    Sep  5 02:23:34 wmprddb1 kernel: cpuidle: using governor ladder
    Sep  5 02:23:34 wmprddb1 kernel: cpuidle: using governor menu
    Sep  5 02:23:34 wmprddb1 kernel: EFI Variables Facility v0.08 2004-May-17
    Sep  5 02:23:34 wmprddb1 kernel: usbcore: registered new interface driver hiddev
    Sep  5 02:23:34 wmprddb1 kernel: usbcore: registered new interface driver usbhid
    Sep  5 02:23:34 wmprddb1 kernel: usbhid: v2.6:USB HID core driver
    Sep  5 02:23:34 wmprddb1 kernel: TCP cubic registered
    Sep  5 02:23:34 wmprddb1 kernel: Initializing XFRM netlink socket
    Sep  5 02:23:34 wmprddb1 kernel: NET: Registered protocol family 17
    Sep  5 02:23:34 wmprddb1 kernel: registered taskstats version 1
    Sep  5 02:23:34 wmprddb1 kernel: rtc_cmos 00:01: setting system clock to 2013-09-05 07:22:17 UTC (1378365737)
    Sep  5 02:23:34 wmprddb1 kernel: Initalizing network drop monitor service
    Sep  5 02:23:34 wmprddb1 kernel: Freeing unused kernel memory: 1264k freed
    Sep  5 02:23:34 wmprddb1 kernel: Write protecting the kernel read-only data: 10240k
    Sep  5 02:23:34 wmprddb1 kernel: Freeing unused kernel memory: 904k freed
    Sep  5 02:23:34 wmprddb1 kernel: Freeing unused kernel memory: 1676k freed
    Sep  5 02:23:34 wmprddb1 kernel: dracut: dracut-004-303.el6
    Sep  5 02:23:34 wmprddb1 kernel: dracut: rd_NO_LUKS: removing cryptoluks activation
    Sep  5 02:23:34 wmprddb1 kernel: dracut: rd_NO_LVM: removing LVM activation
    Sep  5 02:23:34 wmprddb1 kernel: device-mapper: uevent: version 1.0.3
    Sep  5 02:23:34 wmprddb1 kernel: device-mapper: ioctl: 4.23.6-ioctl (2012-07-25) initialised: [email protected]
    Sep  5 02:23:34 wmprddb1 kernel: udev: starting version 147
    Sep  5 02:23:34 wmprddb1 kernel: dracut: Starting plymouth daemon
    Sep  5 02:23:34 wmprddb1 kernel: dracut: rd_NO_DM: removing DM RAID activation
    Sep  5 02:23:34 wmprddb1 kernel: dracut: rd_NO_MD: removing MD RAID activation
    Sep  5 02:23:34 wmprddb1 kernel: scsi0 : ata_piix
    Sep  5 02:23:34 wmprddb1 kernel: scsi1 : ata_piix
    Sep  5 02:23:34 wmprddb1 kernel: ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc100 irq 14
    Sep  5 02:23:34 wmprddb1 kernel: ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc108 irq 15
    Sep  5 02:23:34 wmprddb1 kernel: usb 1-1: new full speed USB device number 2 using uhci_hcd
    Sep  5 02:23:34 wmprddb1 kernel: ata1.00: ATA-7: QEMU HARDDISK, 1.4.2, max UDMA/100
    Sep  5 02:23:34 wmprddb1 kernel: ata1.00: 134217728 sectors, multi 16: LBA48
    Sep  5 02:23:34 wmprddb1 kernel: ata1.01: ATA-7: QEMU HARDDISK, 1.4.2, max UDMA/100
    Sep  5 02:23:34 wmprddb1 kernel: ata1.01: 6442450944 sectors, multi 16: LBA48
    Sep  5 02:23:34 wmprddb1 kernel: ata2.00: ATAPI: QEMU DVD-ROM, 1.4.2, max UDMA/100
    Sep  5 02:23:34 wmprddb1 kernel: ata1.00: configured for MWDMA2
    Sep  5 02:23:34 wmprddb1 kernel: ata2.00: configured for MWDMA2
    Sep  5 02:23:34 wmprddb1 kernel: ata1.01: configured for MWDMA2
    Sep  5 02:23:34 wmprddb1 kernel: scsi 0:0:0:0: Direct-Access     ATA      QEMU HARDDISK    1.4. PQ: 0 ANSI: 5
    Sep  5 02:23:34 wmprddb1 kernel: scsi 0:0:1:0: Direct-Access     ATA      QEMU HARDDISK    1.4. PQ: 0 ANSI: 5
    Sep  5 02:23:34 wmprddb1 kernel: scsi 1:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     1.4. PQ: 0 ANSI: 5
    Sep  5 02:23:34 wmprddb1 kernel: input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
    Sep  5 02:23:34 wmprddb1 kernel: virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
    Sep  5 02:23:34 wmprddb1 kernel: usb 1-1: New USB device found, idVendor=0627, idProduct=0001
    Sep  5 02:23:34 wmprddb1 kernel: usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
    Sep  5 02:23:34 wmprddb1 kernel: usb 1-1: Product: QEMU USB Tablet
    Sep  5 02:23:34 wmprddb1 kernel: usb 1-1: Manufacturer: QEMU
    Sep  5 02:23:34 wmprddb1 kernel: usb 1-1: SerialNumber: 42
    Sep  5 02:23:34 wmprddb1 kernel: usb 1-1: configuration #1 chosen from 1 choice
    Sep  5 02:23:34 wmprddb1 kernel: input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input4
    Sep  5 02:23:34 wmprddb1 kernel: generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
    Sep  5 02:23:34 wmprddb1 kernel: sd 0:0:0:0: [sda] 134217728 512-byte logical blocks: (68.7 GB/64.0 GiB)
    Sep  5 02:23:34 wmprddb1 kernel: sd 0:0:1:0: [sdb] 6442450944 512-byte logical blocks: (3.29 TB/3.00 TiB)
    Sep  5 02:23:34 wmprddb1 kernel: sd 0:0:1:0: [sdb] Write Protect is off
    Sep  5 02:23:34 wmprddb1 kernel: sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Sep  5 02:23:34 wmprddb1 kernel: sd 0:0:0:0: [sda] Write Protect is off
    Sep  5 02:23:34 wmprddb1 kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Sep  5 02:23:34 wmprddb1 kernel: sdb:
    Sep  5 02:23:34 wmprddb1 kernel: sda: sda1 sda2 sda3
    Sep  5 02:23:34 wmprddb1 kernel: sd 0:0:0:0: [sda] Attached SCSI disk
    Sep  5 02:23:34 wmprddb1 kernel: sdb1
    Sep  5 02:23:34 wmprddb1 kernel: sd 0:0:1:0: [sdb] Attached SCSI disk
    Sep  5 02:23:34 wmprddb1 kernel: sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
    Sep  5 02:23:34 wmprddb1 kernel: Uniform CD-ROM driver Revision: 3.20
    Sep  5 02:23:34 wmprddb1 kernel: Refined TSC clocksource calibration: 2793.158 MHz.
    Sep  5 02:23:34 wmprddb1 kernel: EXT4-fs (sda2): INFO: recovery required on readonly filesystem
    Sep  5 02:23:34 wmprddb1 kernel: EXT4-fs (sda2): write access will be enabled during recovery
    Sep  5 02:23:34 wmprddb1 kernel: EXT4-fs (sda2): recovery complete
    Sep  5 02:23:34 wmprddb1 kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
    Sep  5 02:23:34 wmprddb1 kernel: dracut: Mounted root filesystem /dev/sda2
    Sep  5 02:23:34 wmprddb1 kernel: SELinux:  Disabled at runtime.
    Sep  5 02:23:34 wmprddb1 kernel: type=1404 audit(1378365759.705:2): selinux=0 auid=4294967295 ses=4294967295
    Sep  5 02:23:34 wmprddb1 kernel: dracut:
    Sep  5 02:23:34 wmprddb1 kernel: dracut: Switching root
    Sep  5 02:23:34 wmprddb1 kernel: udev: starting version 147
    Sep  5 02:23:34 wmprddb1 kernel: piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
    Sep  5 02:23:34 wmprddb1 kernel: e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
    Sep  5 02:23:34 wmprddb1 kernel: e1000: Copyright (c) 1999-2006 Intel Corporation.
    Sep  5 02:23:34 wmprddb1 kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
    Sep  5 02:23:34 wmprddb1 kernel: e1000 0000:00:12.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, high) -> IRQ 10
    Sep  5 02:23:34 wmprddb1 kernel: e1000 0000:00:12.0: eth0: (PCI:33MHz:32-bit) ce:6d:78:74:c8:1b
    Sep  5 02:23:34 wmprddb1 kernel: e1000 0000:00:12.0: eth0: Intel(R) PRO/1000 Network Connection
    Sep  5 02:23:34 wmprddb1 kernel: e1000 0000:00:13.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
    Sep  5 02:23:34 wmprddb1 kernel: e1000 0000:00:13.0: eth1: (PCI:33MHz:32-bit) 46:07:2f:27:23:9e
    Sep  5 02:23:34 wmprddb1 kernel: e1000 0000:00:13.0: eth1: Intel(R) PRO/1000 Network Connection
    Sep  5 02:23:34 wmprddb1 kernel: e1000 0000:00:14.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
    Sep  5 02:23:34 wmprddb1 kernel: e1000 0000:00:14.0: eth2: (PCI:33MHz:32-bit) b2:ca:27:f7:1f:9a
    Sep  5 02:23:34 wmprddb1 kernel: e1000 0000:00:14.0: eth2: Intel(R) PRO/1000 Network Connection
    Sep  5 02:23:34 wmprddb1 kernel: microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x1
    Sep  5 02:23:34 wmprddb1 kernel: platform microcode: firmware: requesting intel-ucode/06-1a-05
    Sep  5 02:23:34 wmprddb1 kernel: microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x1
    Sep  5 02:23:34 wmprddb1 kernel: platform microcode: firmware: requesting intel-ucode/06-1a-05
    Sep  5 02:23:34 wmprddb1 kernel: microcode: CPU2 sig=0x106a5, pf=0x1, revision=0x1
    Sep  5 02:23:34 wmprddb1 kernel: platform microcode: firmware: requesting intel-ucode/06-1a-05
    Sep  5 02:23:34 wmprddb1 kernel: microcode: CPU3 sig=0x106a5, pf=0x1, revision=0x1
    Sep  5 02:23:34 wmprddb1 kernel: platform microcode: firmware: requesting intel-ucode/06-1a-05
    Sep  5 02:23:34 wmprddb1 kernel: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    Sep  5 02:23:34 wmprddb1 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
    Sep  5 02:23:34 wmprddb1 kernel: sd 0:0:1:0: Attached scsi generic sg1 type 0
    Sep  5 02:23:34 wmprddb1 kernel: sr 1:0:0:0: Attached scsi generic sg2 type 5
    Sep  5 02:23:34 wmprddb1 kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
    Sep  5 02:23:34 wmprddb1 kernel: EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts:
    Sep  5 02:23:34 wmprddb1 kernel: EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
    Sep  5 02:23:34 wmprddb1 kernel: Adding 16777208k swap on /dev/sda3.  Priority:-1 extents:1 across:16777208k
    Sep  5 02:23:34 wmprddb1 kernel: Loading iSCSI transport class v2.0-870.
    Sep  5 02:23:34 wmprddb1 kernel: iscsi: registered transport (tcp)
    Sep  5 02:23:34 wmprddb1 kernel: NET: Registered protocol family 10
    Sep  5 02:23:34 wmprddb1 kernel: lo: Disabled Privacy Extensions
    Sep  5 02:23:34 wmprddb1 kernel: iscsi: registered transport (iser)
    Sep  5 02:23:34 wmprddb1 kernel: libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
    Sep  5 02:23:34 wmprddb1 kernel: libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
    Sep  5 02:23:34 wmprddb1 kernel: Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
    Sep  5 02:23:34 wmprddb1 kernel: iscsi: registered transport (cxgb3i)
    Sep  5 02:23:34 wmprddb1 kernel: Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
    Sep  5 02:23:34 wmprddb1 kernel: iscsi: registered transport (cxgb4i)
    Sep  5 02:23:34 wmprddb1 kernel: cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.13 (Sep 07, 2012)
    Sep  5 02:23:34 wmprddb1 kernel: Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 26, 2012)
    Sep  5 02:23:34 wmprddb1 kernel: iscsi: registered transport (bnx2i)
    Sep  5 02:23:34 wmprddb1 kernel: iscsi: registered transport (be2iscsi)
    Sep  5 02:23:34 wmprddb1 kernel: In beiscsi_module_init, tt=ffffffffa032d620
    Sep  5 02:23:34 wmprddb1 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
    Sep  5 02:23:34 wmprddb1 kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    Sep  5 02:23:34 wmprddb1 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
    Sep  5 02:23:34 wmprddb1 kernel: ADDRCONF(NETDEV_UP): eth1: link is not ready
    Sep  5 02:23:34 wmprddb1 kernel: e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
    Sep  5 02:23:34 wmprddb1 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    Sep  5 02:23:34 wmprddb1 kernel: ADDRCONF(NETDEV_UP): eth2: link is not ready
    Sep  5 02:23:34 wmprddb1 kernel: e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
    Sep  5 02:23:34 wmprddb1 kernel: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
    Sep  5 02:23:34 wmprddb1 kernel: e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
    Sep  5 02:23:34 wmprddb1 kernel: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
    Sep  5 02:23:35 wmprddb1 kernel: scsi2 : iSCSI Initiator over TCP/IP
    Sep  5 02:23:35 wmprddb1 kernel: scsi 2:0:0:0: RAID              IET      Controller       0001 PQ: 0 ANSI: 5
    Sep  5 02:23:35 wmprddb1 kernel: scsi 2:0:0:0: Attached scsi generic sg3 type 12
    Sep  5 02:23:35 wmprddb1 kernel: scsi 2:0:0:1: Direct-Access     IET      VIRTUAL-DISK     0001 PQ: 0 ANSI: 5
    Sep  5 02:23:35 wmprddb1 kernel: sd 2:0:0:1: Attached scsi generic sg4 type 0
    Sep  5 02:23:35 wmprddb1 kernel: scsi 2:0:0:2: Direct-Access     IET      VIRTUAL-DISK     0001 PQ: 0 ANSI: 5
    Sep  5 02:23:35 wmprddb1 kernel: sd 2:0:0:2: Attached scsi generic sg5 type 0
    Sep  5 02:23:35 wmprddb1 kernel: sd 2:0:0:1: [sdc] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
    Sep  5 02:23:35 wmprddb1 kernel: sd 2:0:0:2: [sdd] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
    Sep  5 02:23:35 wmprddb1 kernel: sd 2:0:0:1: [sdc] Write Protect is off
    Sep  5 02:23:35 wmprddb1 kernel: sd 2:0:0:1: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    Sep  5 02:23:35 wmprddb1 kernel: sd 2:0:0:2: [sdd] Write Protect is off
    Sep  5 02:23:35 wmprddb1 kernel: sd 2:0:0:2: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    Sep  5 02:23:35 wmprddb1 kernel: sdc:
    Sep  5 02:23:35 wmprddb1 kernel: sdd: sdc1 sdc2 sdc3 sdc4
    Sep  5 02:23:35 wmprddb1 kernel: sd 2:0:0:1: [sdc] Attached SCSI disk
    Sep  5 02:23:36 wmprddb1 kernel: unknown partition table
    Sep  5 02:23:36 wmprddb1 kernel: sd 2:0:0:2: [sdd] Attached SCSI disk
    Sep  5 02:23:36 wmprddb1 kdump: kexec: loaded kdump kernel
    Sep  5 02:23:36 wmprddb1 kdump: started up
    Sep  5 02:23:36 wmprddb1 iscsid: Connection1:0 to [target: iqn.2013-05.com.mot-mobility.iscsi:prddb, portal: 10.34.8.38,3260] through [iface: default] is operational now
    Sep  5 02:23:36 wmprddb1 rpc.statd[1732]: Version 1.2.3 starting
    Sep  5 02:23:36 wmprddb1 sm-notify[1733]: Version 1.2.3 starting
    Sep  5 02:23:36 wmprddb1 kernel: RPC: Registered named UNIX socket transport module.
    Sep  5 02:23:36 wmprddb1 kernel: RPC: Registered udp transport module.
    Sep  5 02:23:36 wmprddb1 kernel: RPC: Registered tcp transport module.
    Sep  5 02:23:36 wmprddb1 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
    Sep  5 02:23:37 wmprddb1 kernel: Slow work thread pool: Starting up
    Sep  5 02:23:37 wmprddb1 kernel: Slow work thread pool: Ready
    Sep  5 02:23:37 wmprddb1 kernel: FS-Cache: Loaded
    Sep  5 02:23:37 wmprddb1 kernel: Registering the id_resolver key type
    Sep  5 02:23:37 wmprddb1 kernel: FS-Cache: Netfs 'nfs' registered for caching
    Sep  5 02:23:37 wmprddb1 acpid: starting up
    Sep  5 02:23:37 wmprddb1 acpid: 1 rule loaded
    Sep  5 02:23:37 wmprddb1 acpid: waiting for events: event logging is off
    Sep  5 02:23:37 wmprddb1 acpid: client connected from 1886[68:68]
    Sep  5 02:23:37 wmprddb1 acpid: 1 client rule loaded
    Sep  5 02:23:38 wmprddb1 ntpd[1923]: ntpd [email protected] Thu Jan 10 15:17:40 UTC 2013 (1)
    Sep  5 02:23:38 wmprddb1 ntpd[1924]: precision = 0.176 usec
    Sep  5 02:23:38 wmprddb1 ntpd[1924]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
    Sep  5 02:23:38 wmprddb1 ntpd[1924]: Listening on interface #1 wildcard, ::#123 Disabled
    Sep  5 02:23:38 wmprddb1 ntpd[1924]: Listening on interface #2 lo, ::1#123 Enabled
    Sep  5 02:23:38 wmprddb1 ntpd[1924]: Listening on interface #3 eth1, fe80::4407:2fff:fe27:239e#123 Enabled
    Sep  5 02:23:38 wmprddb1 ntpd[1924]: Listening on interface #4 eth0, fe80::cc6d:78ff:fe74:c81b#123 Enabled
    Sep  5 02:23:38 wmprddb1 ntpd[1924]: Listening on interface #5 eth2, fe80::b0ca:27ff:fef7:1f9a#123 Enabled
    Sep  5 02:23:38 wmprddb1 ntpd[1924]: Listening on interface #6 lo, 127.0.0.1#123 Enabled
    Sep  5 02:23:38 wmprddb1 ntpd[1924]: Listening on interface #7 lo:1, 10.34.8.115#123 Enabled
    Sep  5 02:23:38 wmprddb1 ntpd[1924]: Listening on interface #8 eth0, 10.34.8.10#123 Enabled
    Sep  5 02:23:38 wmprddb1 ntpd[1924]: Listening on interface #9 eth0:1, 10.34.8.102#123 Enabled
    Sep  5 02:23:38 wmprddb1 ntpd[1924]: Listening on interface #10 eth1, 192.168.90.50#123 Enabled
    Sep  5 02:23:38 wmprddb1 ntpd[1924]: Listening on interface #11 eth2, 192.168.91.50#123 Enabled
    Sep  5 02:23:38 wmprddb1 ntpd[1924]: Listening on routing socket on fd #28 for interface updates
    Sep  5 02:23:38 wmprddb1 ntpd[1924]: kernel time sync status 2040
    Sep  5 02:23:38 wmprddb1 ntpd[1924]: frequency initialized 2.864 PPM from /var/lib/ntp/drift
    Sep  5 02:23:39 wmprddb1 abrtd: Init complete, entering main loop
    Sep  5 02:23:40 wmprddb1 logger: Oracle HA daemon is enabled for autostart.
    Sep  5 02:23:40 wmprddb1 rhnsd[2100]: Red Hat Network Services Daemon starting up, check in interval 240 minutes.
    Sep  5 02:23:40 wmprddb1 kernel: hcpdriver: module license 'Proprietary' taints kernel.
    Sep  5 02:23:40 wmprddb1 kernel: Disabling lock debugging due to kernel taint
    Sep  5 02:23:40 wmprddb1 kernel: hcp: INFO: hcp driver loaded: 4.4.0 build 18616, NR_CPUS: 4096
    Sep  5 02:23:40 wmprddb1 kernel: hcp: INFO: hcp_watchdog: started.
    Sep  5 02:23:41 wmprddb1 logger: exec /p02/app/11.2.0/grid/perl/bin/perl -I/p02/app/11.2.0/grid/perl/lib /p02/app/11.2.0/grid/bin/crswrapexece.pl /p02/app/11.2.0/grid/crs/install/s_crsconfig_wmprddb1_env.txt /p02/app/11.2.0/grid/bin/ohasd.bin "reboot"
    Sep  5 02:23:42 wmprddb1 /p02/app/11.2.0/grid/bin/crswrapexece.pl[2139]: executing "/p02/app/11.2.0/grid/bin/ohasd.bin reboot"
    Sep  5 02:24:03 wmprddb1 mDNSResponder (Engineering Build) (Jul 31 2009 08:51:29) [2315]: starting
    Sep  5 02:24:04 wmprddb1 mDNSResponder: Oracle mDNSResponder starting
    Sep  5 02:24:07 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:07 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:07 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:07 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:07 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:07 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:09 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:09 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:09 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:09 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:09 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:09 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:12 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:12 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:12 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:13 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:13 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:13 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:24 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:24 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:24 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:24 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:24 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:24 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:25 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:25 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:25 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:25 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:25 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:25 wmprddb1 mDNSResponder: ERROR: read_msg: Connection reset by peer
    Sep  5 02:24:56 wmprddb1 ntpd[1924]: Listening on interface #12 eth0:2, 10.34.8.106#123 Enabled
    Sep  5 02:27:58 wmprddb1 ntpd[1924]: synchronized to 10.177.128.120, stratum 1
    Sep  5 02:29:18 wmprddb1 kernel: Clocksource tsc unstable (delta = -8590540721 ns)
    Details from cluster alert log file :
    [cssd(2379)]CRS-1612:Network communication with node wmprddb2 (2) missing for 50% of timeout interval.  Removal of this node from cluster in 10.460 seconds
    2013-09-05 02:23:52.072
    [ohasd(2139)]CRS-2112:The OLR service started on node wmprddb1.
    2013-09-05 02:23:53.042
    [ohasd(2139)]CRS-8011:reboot advisory message from host: wmprddb1, component: ag093053, with time stamp: L-2013-09-04-02:02:31.795
    [ohasd(2139)]CRS-8013:reboot advisory message text: Rebooting after limit 28250 exceeded; disk timeout 27940, network timeout 28250, last heartbeat from CSSD at epoch seconds 1378278113.113, 38684 milliseconds ago based on invariant clock value of 480878270
    2013-09-05 02:23:55.486
    [ohasd(2139)]CRS-8011:reboot advisory message from host: wmprddb1, component: mo104940, with time stamp: L-2013-09-04-11:14:44.788
    [ohasd(2139)]CRS-8013:reboot advisory message text: Rebooting after limit 26320 exceeded; disk timeout 26320, network timeout 25410, last heartbeat from CSSD at epoch seconds 1378311258.322, 26464 milliseconds ago based on invariant clock value of 577500
    2013-09-05 02:24:01.318
    [ohasd(2139)]CRS-8017:location: /etc/oracle/lastgasp has 354 reboot advisory log files, 2 were announced and 0 errors occurred
    2013-09-05 02:24:03.101
    [ohasd(2139)]CRS-2772:Server 'wmprddb1' has been assigned to pool 'Free'.
    2013-09-05 02:24:06.854
    [cssd(2388)]CRS-1713:CSSD daemon is started in clustered mode
    2013-09-05 02:24:16.288
    [cssd(2388)]CRS-1707:Lease acquisition for node wmprddb1 number 1 completed
    2013-09-05 02:24:16.318
    [cssd(2388)]CRS-1605:CSSD voting file is online: /dev/asm-disk1; details in /p02/app/11.2.0/grid/log/wmprddb1/cssd/ocssd.log.
    2013-09-05 02:24:27.929
    [cssd(2388)]CRS-1601:CSSD Reconfiguration complete. Active nodes are wmprddb1 wmprddb2 .
    2013-09-05 02:24:28.877
    [ctssd(2492)]CRS-2403:The Cluster Time Synchronization Service on host wmprddb1 is in observer mode.
    2013-09-05 02:24:29.724
    [ctssd(2492)]CRS-2401:The Cluster Time Synchronization Service started on host wmprddb1.
    2013-09-05 02:24:30.387
    [ctssd(2492)]CRS-2407:The new Cluster Time Synchronization Service reference node is host wmprddb2.
    2013-09-05 02:24:30.395
    [ctssd(2492)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-05 02:24:45.834
    [crsd(2694)]CRS-1012:The OCR service started on node wmprddb1.
    2013-09-05 02:24:47.959
    [crsd(2694)]CRS-1201:CRSD started on node wmprddb1.
    2013-09-05 02:29:23.327
    [cssd(2388)]CRS-1612:Network communication with node wmprddb2 (2) missing for 50% of timeout interval.  Removal of this node from cluster in 14.330 seconds
    2013-09-05 02:37:00.963
    [ctssd(2492)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    PLEASE PROVIDE SOME UPDATE ASAP ..  Its going on for more than a week now .

    Hello Levi ..
    Thanks for the update ..
    However we have created and SR and working with Oracle. Still facing same issues.
    Node restarted multiple times today ..
    please check the log and provide some more work arounds if possible. ..
    2013-09-06 15:26:31.620
    [crsd(14929)]CRS-2773:Server 'wmprddb2' has been removed from pool 'ora.ebizprd_NEWSRV1'.
    2013-09-06 15:28:26.527
    [cssd(14650)]CRS-1601:CSSD Reconfiguration complete. Active nodes are wmprddb1 wmprddb2 .
    2013-09-06 15:29:00.370
    [crsd(14929)]CRS-2772:Server 'wmprddb2' has been assigned to pool 'Generic'.
    2013-09-06 15:29:00.372
    [crsd(14929)]CRS-2772:Server 'wmprddb2' has been assigned to pool 'ora.ebizprd'.
    2013-09-06 15:29:00.372
    [crsd(14929)]CRS-2772:Server 'wmprddb2' has been assigned to pool 'ora.ebizprd_NEWSRV1'.
    2013-09-06 15:29:00.372
    [crsd(14929)]CRS-2772:Server 'wmprddb2' has been assigned to pool 'ora.ebizprd_NEWSRV'.
    2013-09-06 15:36:56.873
    [cssd(14650)]CRS-1612:Network communication with node wmprddb2 (2) missing for 50% of timeout interval.  Removal of this node from cluster in 12.280 seconds
    2013-09-06 19:28:02.570
    [cssd(14650)]CRS-1611:Network communication with node wmprddb2 (2) missing for 75% of timeout interval.  Removal of this node from cluster in 5.320 seconds
    2013-09-07 03:31:55.801
    [cssd(14650)]CRS-1614:No I/O has completed after 75% of the maximum interval. Voting file /dev/asm-disk1 will be considered not functional in 6060 milliseconds
    2013-09-09 01:12:58.503
    [cssd(14650)]CRS-1604:CSSD voting file is offline: /dev/asm-disk1; details at (:CSSNM00058:) in /p02/app/11.2.0/grid/log/wmprddb1/cssd/ocssd.log.
    2013-09-09 01:12:58.503
    [cssd(14650)]CRS-1606:The number of voting files available, 0, is less than the minimum number of voting files required, 1, resulting in CSSD termination to ensure data integrity; details at (:CSSNM00018:) in /p02/app/11.2.0/grid/log/wmprddb1/cssd/ocssd.log
    2013-09-09 01:12:58.506
    [ohasd(2144)]CRS-8011:reboot advisory message from host: wmprddb1, component: mo224047, with time stamp: L-2013-09-09-01:12:58.504
    [ohasd(2144)]CRS-8013:reboot advisory message text: Rebooting after limit 28270 exceeded; disk timeout 27500, network timeout 28270, last heartbeat from CSSD at epoch seconds 1378706815.931, 362510 milliseconds ago based on invariant clock value of 301809314
    2013-09-09 01:14:31.574
    [crsd(14929)]CRS-2765:Resource 'ora.ebizprd.db' has failed on server 'wmprddb1'.
    2013-09-09 01:20:38.387
    [ohasd(2167)]CRS-2112:The OLR service started on node wmprddb1.
    2013-09-09 01:20:43.215
    [ohasd(2167)]CRS-8011:reboot advisory message from host: wmprddb1, component: mo224047, with time stamp: L-2013-09-09-01:12:58.504
    [ohasd(2167)]CRS-8013:reboot advisory message text: Rebooting after limit 28270 exceeded; disk timeout 27500, network timeout 28270, last heartbeat from CSSD at epoch seconds 1378706815.931, 362510 milliseconds ago based on invariant clock value of 301809314
    2013-09-09 01:20:48.400
    [ohasd(2167)]CRS-8017:location: /etc/oracle/lastgasp has 368 reboot advisory log files, 1 were announced and 0 errors occurred
    2013-09-09 01:20:50.801
    [ohasd(2167)]CRS-2772:Server 'wmprddb1' has been assigned to pool 'Free'.
    2013-09-09 01:20:54.688
    [cssd(2413)]CRS-1713:CSSD daemon is started in clustered mode
    2013-09-09 01:21:06.177
    [cssd(2413)]CRS-1707:Lease acquisition for node wmprddb1 number 1 completed
    2013-09-09 01:21:06.231
    [cssd(2413)]CRS-1605:CSSD voting file is online: /dev/asm-disk1; details in /p02/app/11.2.0/grid/log/wmprddb1/cssd/ocssd.log.
    2013-09-09 01:21:18.080
    [cssd(2413)]CRS-1601:CSSD Reconfiguration complete. Active nodes are wmprddb1 wmprddb2 .
    2013-09-09 01:21:19.679
    [ctssd(2533)]CRS-2403:The Cluster Time Synchronization Service on host wmprddb1 is in observer mode.
    2013-09-09 01:21:20.511
    [ctssd(2533)]CRS-2401:The Cluster Time Synchronization Service started on host wmprddb1.
    2013-09-09 01:21:21.214
    [ctssd(2533)]CRS-2407:The new Cluster Time Synchronization Service reference node is host wmprddb2.
    2013-09-09 01:21:21.250
    [ctssd(2533)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-09 01:21:38.561
    [crsd(2744)]CRS-1012:The OCR service started on node wmprddb1.
    2013-09-09 01:21:40.684
    [crsd(2744)]CRS-1201:CRSD started on node wmprddb1.
    2013-09-09 05:27:10.018
    [ctssd(2533)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-09 09:35:08.407
    [ctssd(2533)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-09 13:42:01.043
    [ctssd(2533)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-09 17:55:00.185
    [ctssd(2533)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-09 22:02:24.885
    [ctssd(2533)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-10 02:14:22.832
    [ctssd(2533)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-10 06:27:21.917
    [ctssd(2533)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-10 10:35:43.068
    [ctssd(2533)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-10 14:11:20.820
    [cssd(2413)]CRS-1612:Network communication with node wmprddb2 (2) missing for 50% of timeout interval.  Removal of this node from cluster in 14.180 seconds
    2013-09-10 14:55:56.051
    [ctssd(2533)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-10 19:19:16.100
    [ctssd(2533)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-10 23:35:54.158
    [ctssd(2533)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-11 03:46:23.286
    [ctssd(2533)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-11 07:59:27.716
    [ctssd(2533)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-11 12:14:17.259
    [ctssd(2533)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-11 16:29:50.113
    [ctssd(2533)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-11 20:55:26.122
    [ctssd(2533)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-12 01:13:44.095
    [ctssd(2533)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-12 02:34:26.298
    [ohasd(2155)]CRS-2112:The OLR service started on node wmprddb1.
    2013-09-12 02:34:31.876
    [ohasd(2155)]CRS-8011:reboot advisory message from host: wmprddb1, component: ag012106, with time stamp: L-2013-09-12-02:32:31.817
    [ohasd(2155)]CRS-8013:reboot advisory message text: Rebooting after limit 27880 exceeded; disk timeout 27880, network timeout 27650, last heartbeat from CSSD at epoch seconds 1378971123.548, 28271 milliseconds ago based on invariant clock value of 262545873
    2013-09-12 02:34:36.770
    [ohasd(2155)]CRS-8011:reboot advisory message from host: wmprddb1, component: mo224047, with time stamp: L-2013-09-09-01:12:58.504
    [ohasd(2155)]CRS-8013:reboot advisory message text: Rebooting after limit 28270 exceeded; disk timeout 27500, network timeout 28270, last heartbeat from CSSD at epoch seconds 1378706815.931, 362510 milliseconds ago based on invariant clock value of 301809314
    2013-09-12 02:34:46.087
    [ohasd(2155)]CRS-8017:location: /etc/oracle/lastgasp has 370 reboot advisory log files, 2 were announced and 0 errors occurred
    2013-09-12 02:34:47.539
    [ohasd(2155)]CRS-2772:Server 'wmprddb1' has been assigned to pool 'Free'.
    2013-09-12 02:34:51.530
    [cssd(2386)]CRS-1713:CSSD daemon is started in clustered mode
    2013-09-12 02:35:03.390
    [cssd(2386)]CRS-1707:Lease acquisition for node wmprddb1 number 1 completed
    2013-09-12 02:35:03.426
    [cssd(2386)]CRS-1605:CSSD voting file is online: /dev/asm-disk1; details in /p02/app/11.2.0/grid/log/wmprddb1/cssd/ocssd.log.
    2013-09-12 02:35:40.068
    [cssd(2386)]CRS-1601:CSSD Reconfiguration complete. Active nodes are wmprddb1 wmprddb2 .
    2013-09-12 02:35:41.503
    [ctssd(2524)]CRS-2403:The Cluster Time Synchronization Service on host wmprddb1 is in observer mode.
    2013-09-12 02:35:41.530
    [ctssd(2524)]CRS-2407:The new Cluster Time Synchronization Service reference node is host wmprddb2.
    2013-09-12 02:35:41.538
    [ctssd(2524)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-12 02:35:42.282
    [ctssd(2524)]CRS-2401:The Cluster Time Synchronization Service started on host wmprddb1.
    2013-09-12 02:36:12.633
    [crsd(2747)]CRS-1012:The OCR service started on node wmprddb1.
    2013-09-12 02:36:15.517
    [crsd(2747)]CRS-1201:CRSD started on node wmprddb1.
    2013-09-12 02:36:19.256
    [crsd(2747)]CRS-2772:Server 'wmprddb1' has been assigned to pool 'Generic'.
    2013-09-12 02:36:19.256
    [crsd(2747)]CRS-2772:Server 'wmprddb1' has been assigned to pool 'ora.ebizprd'.
    2013-09-12 02:36:19.257
    [crsd(2747)]CRS-2772:Server 'wmprddb1' has been assigned to pool 'ora.ebizprd_NEWSRV1'.
    2013-09-12 02:36:19.330
    [crsd(2747)]CRS-2772:Server 'wmprddb1' has been assigned to pool 'ora.ebizprd_NEWSRV'.
    2013-09-12 02:39:03.666
    [crsd(2747)]CRS-2772:Server 'wmprddb2' has been assigned to pool 'Generic'.
    2013-09-12 02:39:03.666
    [crsd(2747)]CRS-2772:Server 'wmprddb2' has been assigned to pool 'ora.ebizprd'.
    2013-09-12 02:39:03.667
    [crsd(2747)]CRS-2772:Server 'wmprddb2' has been assigned to pool 'ora.ebizprd_NEWSRV1'.
    2013-09-12 02:39:03.667
    [crsd(2747)]CRS-2772:Server 'wmprddb2' has been assigned to pool 'ora.ebizprd_NEWSRV'.
    2013-09-12 02:56:34.796
    [cssd(2386)]CRS-1612:Network communication with node wmprddb2 (2) missing for 50% of timeout interval.  Removal of this node from cluster in 14.240 seconds
    2013-09-12 03:04:30.467
    [ctssd(2524)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-12 03:56:40.283
    [ctssd(2524)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-12 04:01:29.311
    [ctssd(2524)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-12 04:30:15.619
    [ctssd(2524)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-12 04:47:47.914
    [cssd(2386)]CRS-1614:No I/O has completed after 75% of the maximum interval. Voting file /dev/asm-disk1 will be considered not functional in 6070 milliseconds
    2013-09-12 04:51:29.577
    [ctssd(2524)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-12 04:52:50.706
    [ctssd(2524)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-12 05:06:34.196
    [ctssd(2524)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-12 05:20:50.567
    [ctssd(2524)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-12 05:37:57.880
    [ctssd(2524)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-12 06:10:12.542
    [ctssd(2524)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-12 06:17:10.910
    [ctssd(2524)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-12 06:56:09.891
    [ohasd(2156)]CRS-2112:The OLR service started on node wmprddb1.
    2013-09-12 06:56:13.926
    [ohasd(2156)]CRS-8011:reboot advisory message from host: wmprddb1, component: ag012106, with time stamp: L-2013-09-12-02:32:31.817
    [ohasd(2156)]CRS-8013:reboot advisory message text: Rebooting after limit 27880 exceeded; disk timeout 27880, network timeout 27650, last heartbeat from CSSD at epoch seconds 1378971123.548, 28271 milliseconds ago based on invariant clock value of 262545873
    2013-09-12 06:56:16.041
    [ohasd(2156)]CRS-8011:reboot advisory message from host: wmprddb1, component: mo224047, with time stamp: L-2013-09-09-01:12:58.504
    [ohasd(2156)]CRS-8013:reboot advisory message text: Rebooting after limit 28270 exceeded; disk timeout 27500, network timeout 28270, last heartbeat from CSSD at epoch seconds 1378706815.931, 362510 milliseconds ago based on invariant clock value of 301809314
    2013-09-12 06:56:22.248
    [ohasd(2156)]CRS-8017:location: /etc/oracle/lastgasp has 372 reboot advisory log files, 2 were announced and 0 errors occurred
    2013-09-12 06:56:24.514
    [ohasd(2156)]CRS-2772:Server 'wmprddb1' has been assigned to pool 'Free'.
    2013-09-12 06:56:28.435
    [cssd(2383)]CRS-1713:CSSD daemon is started in clustered mode
    2013-09-12 06:56:40.174
    [cssd(2383)]CRS-1707:Lease acquisition for node wmprddb1 number 1 completed
    2013-09-12 06:56:40.226
    [cssd(2383)]CRS-1605:CSSD voting file is online: /dev/asm-disk1; details in /p02
    2013-09-12 06:56:51.094
    [cssd(2383)]CRS-1601:CSSD Reconfiguration complete. Active nodes are wmprddb1 wm
    2013-09-12 06:56:52.415
    [ctssd(2502)]CRS-2403:The Cluster Time Synchronization Service on host wmprddb1
    2013-09-12 06:56:52.832
    [ctssd(2502)]CRS-2407:The new Cluster Time Synchronization Service reference nod
    2013-09-12 06:56:52.840
    [ctssd(2502)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mea                                                                                        running in observer mode.
    2013-09-12 06:56:53.197
    [ctssd(2502)]CRS-2401:The Cluster Time Synchronization Service started on host w
    2013-09-12 06:57:13.173
    [crsd(2716)]CRS-1012:The OCR service started on node wmprddb1.
    2013-09-12 06:57:14.675
    [crsd(2716)]CRS-1201:CRSD started on node wmprddb1.
    2013-09-12 07:00:50.465
    [cssd(2383)]CRS-1612:Network communication with node wmprddb2 (2) missing for 50
    Filter 
    Unread Only
    Mark all read
    Levi-Pereira replied to
    NODE GETTING EVICTED ?
    2 days ago
    NODE GETTING EVICTED ? in Real Application Clusters 
    hasib asked 1 week ago Hello All,   We have a Two node production setup for RAC 11gR2 on VM. We are facing issue of frequent Node eviction. Node gets evicted atleast once a day, We have tried switching to Single node and…
    SHOW FULL PREVIEW
    Mark unreadStop tracking
    2 replies
    Latest activity
    hasib replied (in response to hasib) 1 week ago
    The node rebooted again, both the nodes rebooted thrice in half an hour giving following error:
    CRS-1612:Network communication with node wmprddb2 (2) missing for 50% of timeout interval.  Removal of this node from cluster in 12.480 seconds
    2013-09-05 10:37:04.806
    [ctssd(2540)]CRS-2409:The clock on host wmprddb1 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2013-09-05 10:39:31.565
    [ohasd(2128)]CRS-2112:The OLR service started on node wmprddb1.
    2013-09-05 10:39:31.793
    [ohasd(2128)]CRS-8011:reboot advisory message from host: wmprddb1, component: ag093053, with time stamp: L-2013-09-04-02:02:31.795
    [ohasd(2128)]CRS-8013:reboot advisory message text: Rebooting after limit 28250 exceeded; disk timeout 27940, network timeout 28250, last heartbeat from CSSD at epoch seconds 1378278113.113, 38684 milliseconds ago based on invariant clock value of 480878270
    2013-09-05 10:39:32.036
    [ohasd(2128)]CRS-8011:reboot advisory message from host: wmprddb1, component: mo102023, with time stamp: L-2013-09-05-10:38:06.313
    [ohasd(2128)]CRS-8013:reboot advisory message text: Rebooting after limit 25570 exceeded; disk timeout 6560, network timeout 25570, last heartbeat from CSSD at epoch seconds 1378395458.791, 27520 milliseconds ago based on invariant clock value of 243974
    2013-09-05 10:39:32.072
    [ohasd(2128)]CRS-8011:reboot advisory message from host: wmprddb1, component: mo104940, with time stamp: L-2013-09-04-11:14:44.788
    [ohasd(2128)]CRS-8013:reboot advisory message text: Rebooting after limit 26320 exceeded; disk timeout 26320, network timeout 25410, last heartbeat from CSSD at epoch seconds 1378311258.322, 26464 milliseconds ago based on invariant clock value of 577500
    2013-09-05 10:39:32.719
    [ohasd(2128)]CRS-8017:location: /etc/oracle/lastgasp has 358 reboot advisory log files, 3 were announced and 0 errors occurred
    2013-09-05 10:39:34.258
    [ohasd(2128)]CRS-2772:Server 'wmprddb1' has been assigned to pool 'Free'.
    2013-09-05 10:39:37.919
    [cssd(2378)]CRS-1713:CSSD daemon is started in clustered mode
    2013-09-05 10:39:49.264
    [cssd(2378)]CRS-1707:Lease acquisition for node wmprddb1 number 1 completed
    2013-09-05 10:39:49.292
    [cssd(2378)]CRS-1605:CSSD voting file is online: /dev/asm-disk1; details in /p02/app/11.2.0/grid/log/wmprddb1/cssd/ocssd.log.
    2013-09-05 10:40:13.946
    [cssd(2378)]CRS-1601:CSSD Reconfiguration complete. Active nodes are wmprddb1 wmprddb2 .
    log writer taking 99% I/O
    Reply
    Like (0)
    Levi-Pereira replied (in response to hasib) 2 days ago
    To deploy Oracle RAC on Virtualized Env must be done carefully, because RAC/Clusterware is more sensitive to bad performance. (split-brain occurs due I/O or CPU starvation).
    I can see:
    1: CRS-1612:Network communication with node wmprddb2 (2) missing for 50% of timeout interval. Removal of this node from cluster in 12.480 seconds
    2013-09-05 10:37:04.806
    2: Rebooting after limit 25570 exceeded; disk timeout 6560, network timeout 25570, last heartbeat from CSSD at epoch seconds 1378395458.791, 27520 milliseconds ago based on invariant clock value of 243974

  • New Installation : Login Delays and Wifi Problems

    Hey There,
    I just a HP Pavilion DV2850ET laptop computer and decided to run Arch on it. But I have 2 major problems as for now. I'll be very pleased if I get over them.
    1) When the kernel starts loading with vga=792 parameter on, 2 Arch Linux logo shows up instead of 1.. I don't think that this is normal.
    2) I've installed all packages with the newest ISO image release: Archlinux-i686-2007.08-2.core.iso - It's installed without any problems. When the login prompt appears (that I'm going to write root to do the rest of the installation for a while) I can't write anything for about 10-15 seconds. After the 10-15 seconds of waiting, I can write whatever I want.. But this happens all the time and I have to wait everytime I open the computer. I thought that maybe this could be something related with the kernel installed so I upgraded to testing. But nothing changed. This is the most annoying part actually..
    3) I have 07:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) on the laptop. There are several modules for this card as far as I can see like: ipw3945, ipl3945, etc.. During the installation, I let hwdetect to fill modules part in rc.conf and it added these modules: sky2 iwl3945 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore - What are all these sound modules any way ? Are they really necessary ?
    Here are lspci and dmesg outputs. I hope they help..
    lspci:
    00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
    00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
    00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
    00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
    00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
    00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
    00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
    00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
    00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
    01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400M GS (rev a1)
    05:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8039 PCI-E Fast Ethernet Controller (rev 14)
    07:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
    08:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
    08:09.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
    08:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
    08:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
    08:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
    dmesg:
    Linux version 2.6.23-ARCH (root@T-POWA-LX) (gcc version 4.2.2) #1 SMP PREEMPT Mon Oct 15 16:46:31 UTC 2007
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007fec0000 (usable)
    BIOS-e820: 000000007fec0000 - 000000007fedf000 (ACPI NVS)
    BIOS-e820: 000000007fedf000 - 0000000080000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    1150MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000f7e50
    Entering add_active_range(0, 0, 523968) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 229376
    HighMem 229376 -> 523968
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 523968
    On node 0 totalpages: 523968
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 1760 pages used for memmap
    Normal zone: 223520 pages, LIFO batch:31
    HighMem zone: 2301 pages used for memmap
    HighMem zone: 292291 pages, LIFO batch:31
    Movable zone: 0 pages used for memmap
    DMI present.
    ACPI: RSDP 000F7E20, 0024 (r2 PTLTD )
    ACPI: XSDT 7FED05BA, 0074 (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
    ACPI: FACP 7FEDBC3A, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
    ACPI: DSDT 7FED12C7, A8FF (r2 INTEL CRESTLNE 6040000 MSFT 3000000)
    ACPI: FACS 7FEDEFC0, 0040
    ACPI: HPET 7FEDBD2E, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
    ACPI: MCFG 7FEDBD66, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
    ACPI: TCPA 7FEDBDA2, 0032 (r1 Intel CRESTLN 6040000 5A52)
    ACPI: TMOR 7FEDBDD4, 0026 (r1 PTLTD 6040000 PTL 3)
    ACPI: SLIC 7FEDBDFA, 0176 (r1 HPQOEM SLIC-MPC 6040000 HPQ 1)
    ACPI: APIC 7FEDBF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
    ACPI: BOOT 7FEDBFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
    ACPI: SSDT 7FED0FEA, 02DD (r1 SataRe SataAhci 1000 INTL 20060912)
    ACPI: SSDT 7FED062E, 04E6 (r1 PmRef CpuPm 3000 INTL 20060912)
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
    OEM ID: INTEL Product ID: S. Rosa CRB APIC at: 0xFEE00000
    Processor #0 6:15 APIC version 20
    Processor #1 6:15 APIC version 20
    I/O APIC #2 Version 32 at 0xFEC00000.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Processors: 2
    Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
    swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
    swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000
    swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000
    swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000e0000
    swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
    Built 1 zonelists in Zone order. Total pages: 519875
    Kernel command line: root=/dev/sda2 ro quiet vga=792 noapic nolapic
    mapped APIC to ffffb000 (fee00000)
    mapped IOAPIC to ffffa000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Detected 1995.160 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 2071792k/2095872k available (2442k kernel code, 22764k reserved, 814k data, 296k init, 1178368k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    .init : 0xc0435000 - 0xc047f000 ( 296 kB)
    .data : 0xc0362839 - 0xc042e21c ( 814 kB)
    .text : 0xc0100000 - 0xc0362839 (2442 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
    Calibrating delay using timer specific routine.. 3994.51 BogoMIPS (lpj=6655229)
    Security Framework v1.0.0 initialized
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
    monitor/mwait feature present.
    using mwait in idle threads.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Early unpacking initramfs... done
    ACPI: Core revision 20070126
    ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    ACPI: setting ELCR to 0200 (from 0c00)
    CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
    SMP alternatives: switching to SMP code
    Booting processor 1/1 eip 3000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 3991.19 BogoMIPS (lpj=6649906)
    CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
    monitor/mwait feature present.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
    Total of 2 processors activated (7986.70 BogoMIPS).
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: Using MMCONFIG
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    ACPI: System BIOS is requesting _OSI(Linux)
    ACPI: If "acpi_osi=Linux" works better,
    Please send dmidecode to [email protected]
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    SCSI subsystem initialized
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    Time: tsc clocksource has been installed.
    pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
    pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
    pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
    pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
    pnp: 00:06: iomem range 0xfed00000-0xfed003ff could not be reserved
    PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
    PCI: Bridge: 0000:00:01.0
    IO window: 2000-2fff
    MEM window: cc000000-ceffffff
    PREFETCH window: d0000000-dfffffff
    PCI: Bridge: 0000:00:1c.0
    IO window: 3000-3fff
    MEM window: f2000000-f3ffffff
    PREFETCH window: f0000000-f1ffffff
    PCI: Bridge: 0000:00:1c.1
    IO window: 4000-4fff
    MEM window: f4000000-f40fffff
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.2
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.3
    IO window: disabled.
    MEM window: f4100000-f41fffff
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1e.0
    IO window: disabled.
    MEM window: f4200000-f42fffff
    PREFETCH window: disabled.
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.1[b] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
    ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:1c.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1c.3 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
    TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    checking if image is initramfs... it is
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 0
    Freeing initrd memory: 1578k freed
    Simple Boot Flag at 0x36 set to 0x1
    apm: BIOS not found.
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Installing knfsd (copyright (C) 1996 [email protected]).
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Boot video device is 0000:01:00.0
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:01.0:pcie00]
    Allocate Port Service[0000:00:01.0:pcie02]
    Allocate Port Service[0000:00:01.0:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0:pcie00]
    Allocate Port Service[0000:00:1c.0:pcie02]
    Allocate Port Service[0000:00:1c.0:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.1:pcie00]
    Allocate Port Service[0000:00:1c.1:pcie02]
    Allocate Port Service[0000:00:1c.1:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.2:pcie00]
    Allocate Port Service[0000:00:1c.2:pcie02]
    Allocate Port Service[0000:00:1c.2:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.3 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.3:pcie00]
    Allocate Port Service[0000:00:1c.3:pcie02]
    Allocate Port Service[0000:00:1c.3:pcie03]
    vesafb: framebuffer at 0xcd000000, mapped to 0xf8880000, using 6144k, total 14336k
    vesafb: mode is 1024x768x32, linelength=4096, pages=1
    vesafb: protected mode interface info at c000:b540
    vesafb: pmi: set display start = c00cb5a3, set palette = c00cb5fe
    vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    loop: module loaded
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    Freeing unused kernel memory: 296k freed
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    libata version 2.21 loaded.
    ahci 0000:00:1f.2: version 2.3
    ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
    ACPI: PCI Interrupt 0000:00:1f.2[b] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
    ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    ata1: SATA max UDMA/133 cmd 0xf8830100 ctl 0x00000000 bmdma 0x00000000 irq 10
    ata2: SATA max UDMA/133 cmd 0xf8830180 ctl 0x00000000 bmdma 0x00000000 irq 10
    ata3: SATA max UDMA/133 cmd 0xf8830200 ctl 0x00000000 bmdma 0x00000000 irq 10
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-7: ST9160821AS, 3.BHD, max UDMA/100
    ata1.00: 312581808 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/100
    ata2: SATA link down (SStatus 0 SControl 300)
    ata3: SATA link down (SStatus 0 SControl 300)
    scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.BH PQ: 0 ANSI: 5
    ata_piix 0000:00:1f.1: version 2.12
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1f.1 to 64
    scsi3 : ata_piix
    scsi4 : ata_piix
    ata4: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011830 irq 14
    ata5: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011838 irq 15
    ata4.00: ATAPI: TSSTcorpCD/DVDW TS-L632M, 0A17, max MWDMA2
    ata4.00: configured for MWDMA2
    scsi 3:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632M 0A17 PQ: 0 ANSI: 5
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1a.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:00:1a.0 to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1a.0: irq 10, io base 0x00001840
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:1a.1[b] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1a.1 to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1a.1: irq 11, io base 0x00001860
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1a.7[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:00:1a.7 to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
    ehci_hcd 0000:00:1a.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1a.7
    ehci_hcd 0000:00:1a.7: irq 10, io mem 0xf4505c00
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 4 ports detected
    ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4506000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 6 ports detected
    sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 3:0:0:0: Attached scsi CD-ROM sr0
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001880
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    sda1 sda2 sda3
    sd 0:0:0:0: [sda] Attached SCSI disk
    ACPI: PCI Interrupt 0000:00:1d.1[b] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.1: irq 11, io base 0x000018a0
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.2: irq 10, io base 0x000018c0
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    usb 4-5: new high speed USB device using ehci_hcd and address 3
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    usb 4-5: configuration #1 chosen from 1 choice
    usb 5-1: new low speed USB device using uhci_hcd and address 2
    usb 5-1: configuration #1 chosen from 1 choice
    usb 2-1: new full speed USB device using uhci_hcd and address 2
    usb 2-1: configuration #1 chosen from 1 choice
    ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:05:00.0 to 64
    sky2 0000:05:00.0: v1.18 addr 0xf4000000 irq 11 Yukon-FE (0xb7) rev 3
    sky2 eth0: addr 00:16:d3:f0:65:5b
    usb 7-2: new full speed USB device using uhci_hcd and address 2
    iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.0ds
    iwl3945: Copyright(c) 2003-2007 Intel Corporation
    ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:07:00.0 to 64
    iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
    usb 7-2: configuration #1 chosen from 1 choice
    iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
    wmaster0: Selected rate control algorithm 'iwl-3945-rs'
    Bluetooth: Core ver 2.11
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: HCI USB driver ver 2.9
    usbcore: registered new interface driver hci_usb
    ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    ACPI: AC Adapter [ADP1] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /devices/virtual/input/input2
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /devices/virtual/input/input3
    ACPI: Lid Switch [LID0]
    input: Sleep Button (CM) as /devices/virtual/input/input4
    ACPI: Sleep Button (CM) [SLPB]
    ACPI: SSDT 7FED0CA8, 027A (r1 PmRef Cpu0Ist 3000 INTL 20060912)
    ACPI: SSDT 7FED0B14, 010F (r1 PmRef Cpu0Cst 3001 INTL 20060912)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: SSDT 7FED0F22, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20060912)
    ACPI: SSDT 7FED0C23, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20060912)
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    Marking TSC unstable due to: possible TSC halt in C2.
    Time: hpet clocksource has been installed.
    ACPI: Thermal Zone [TZS0] (54 C)
    ACPI: Thermal Zone [TZS1] (65 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 3:0:0:0: Attached scsi generic sg1 type 5
    usbcore: registered new interface driver hiddev
    Linux agpgart interface v0.102
    input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input5
    input: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:1d.0-1
    usbcore: registered new interface driver usbhid
    drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    ACPI: PCI Interrupt 0000:00:1f.3[C] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    input: PS/2 Mouse as /devices/virtual/input/input6
    input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input7
    input: Video Bus as /devices/virtual/input/input8
    ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    input: Video Bus as /devices/virtual/input/input9
    ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    ACPI: PCI Interrupt 0000:08:09.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[f4200000-f42007ff] Max Packet=[2048] IR/IT contexts=[4/4]
    sdhci: SDHCI controller found at 0000:08:09.1 [1180:0822] (rev 22)
    ACPI: PCI Interrupt 0000:08:09.1[b] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    mmc0: SDHCI at 0xf4200800 irq 10 DMA
    EXT3 FS on sda2, internal journal
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[07e40a00fd365135]
    Clocksource tsc unstable (delta = -266484522 ns)
    atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
    atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
    atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
    atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
    usb 4-4: new high speed USB device using ehci_hcd and address 5
    usb 4-4: configuration #1 chosen from 1 choice
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Initializing USB Mass Storage driver...
    scsi5 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 5
    usb-storage: waiting for device to settle before scanning
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    scsi 5:0:0:0: Direct-Access SanDisk Cruzer Micro 0.1 PQ: 0 ANSI: 2
    sd 5:0:0:0: [sdb] 2001888 512-byte hardware sectors (1025 MB)
    sd 5:0:0:0: [sdb] Write Protect is off
    sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
    sd 5:0:0:0: [sdb] Assuming drive cache: write through
    sd 5:0:0:0: [sdb] 2001888 512-byte hardware sectors (1025 MB)
    sd 5:0:0:0: [sdb] Write Protect is off
    sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
    sd 5:0:0:0: [sdb] Assuming drive cache: write through
    sdb: sdb1 sdb2
    sd 5:0:0:0: [sdb] Attached SCSI removable disk
    sd 5:0:0:0: Attached scsi generic sg2 type 0
    usb-storage: device scan complete

    At this moment, I believe the ipw3945 module and it's deamon work better than the iwf3945. So you can start changing this. In the module line in rc.conf change iwf to ipw. In the deamons line add before the network deamon ipw3945d and youre done.
    The double archlogo is standard I think, got them too

  • Can't connect to new router...

    Hi
    I've just installed a new intranet here at my place and one of the changes is that my computer must connect to another router now. While everything works perfect in both Knoppix and windows, I can't get Arch to connect....
    I've collected all files to show you my situation (I think):
    rc.conf:
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_GB.utf8"
    HARDWARECLOCK="localtime"
    TIMEZONE="Europe/Brussels"
    KEYMAP="be-latin1.map.gz"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # Scan hardware and load required modules at bootup
    MOD_AUTOLOAD="yes"
    # Module Blacklist - modules in this list will never be loaded by udev
    MOD_BLACKLIST=(pcmcia)
    # Modules to load at boot-up (in this order)
    # - prefix a module with a ! to blacklist it
    MODULES=(ath_pci fglrx powernow-k8)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    HOSTNAME="icarus"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
    # interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
    lo="lo 127.0.0.1"
    eth0="dhcp"
    INTERFACES=(lo eth0)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.123.254"
    #gateway="default gw 192.168.1.1"
    ROUTES=(gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network-profiles
    #NET_PROFILES=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(@syslog-ng iptables @network !netfs @hal @crond !ifplugd @alsa @ddclient @denyhosts @sshd @mpd @powernowd)
    # End of file
    lspci -vvv section for my network card:
    02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
    Subsystem: Unknown device 1631:d008
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
    Latency: 64 (8000ns min, 16000ns max)
    Interrupt: pin A routed to IRQ 19
    Region 0: I/O ports at 8800 [size=256]
    Region 1: Memory at ff3ef400 (32-bit, non-prefetchable) [size=256]
    Expansion ROM at 50000000 [disabled] [size=64K]
    Capabilities: <access denied>
    ifconfig output:
    eth0 Link encap:Ethernet HWaddr 00:13:D3:8B:9E:89
    inet addr:192.168.123.1 Bcast:192.168.123.255 Mask:255.255.255.0
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:2 errors:0 dropped:0 overruns:0 frame:0
    TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:690 (690.0 b) TX bytes:994 (994.0 b)
    Interrupt:19 Base address:0x400
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:68 errors:0 dropped:0 overruns:0 frame:0
    TX packets:68 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:3998 (3.9 Kb) TX bytes:3998 (3.9 Kb)
    lsmod:
    Module Size Used by
    nls_cp437 5888 1
    vfat 10880 1
    fat 45852 1 vfat
    cpufreq_userspace 3536 1
    ipt_REJECT 3968 1
    ipt_LOG 6144 8
    nf_conntrack_ipv4 14092 6
    xt_state 2432 6
    nf_conntrack 52872 2 nf_conntrack_ipv4,xt_state
    nfnetlink 4760 2 nf_conntrack_ipv4,nf_conntrack
    xt_limit 2560 10
    xt_tcpudp 3328 22
    iptable_filter 2688 1
    iptable_mangle 2560 0
    ip_tables 10452 2 iptable_filter,iptable_mangle
    x_tables 11908 6 ipt_REJECT,ipt_LOG,xt_state,xt_limit,xt_tcpudp,ip_tables
    isofs 31040 0
    zlib_inflate 16256 1 isofs
    tda827x 6916 1
    saa7134_dvb 15884 0
    dvb_pll 12292 1 saa7134_dvb
    ohci1394 31408 0
    ieee1394 81720 1 ohci1394
    video_buf_dvb 4996 1 saa7134_dvb
    dvb_core 71976 1 video_buf_dvb
    tda1004x 15492 2 saa7134_dvb
    snd_seq_oss 29312 0
    snd_seq_midi_event 6528 1 snd_seq_oss
    snd_seq 46672 4 snd_seq_oss,snd_seq_midi_event
    snd_seq_device 6924 2 snd_seq_oss,snd_seq
    ppdev 7556 0
    lp 9348 0
    tuner 61352 0
    usb_storage 79296 1
    snd_pcm_oss 37024 0
    snd_mixer_oss 14592 1 snd_pcm_oss
    firewire_ohci 15360 0
    firewire_core 36032 1 firewire_ohci
    crc_itu_t 2304 1 firewire_core
    pcspkr 2944 0
    saa7134 119244 1 saa7134_dvb
    ppp_generic 23828 0
    slhc 5760 1 ppp_generic
    ide_core 112580 1 usb_storage
    8139cp 19584 0
    8139too 23168 0
    mii 4864 2 8139cp,8139too
    video_buf 20356 3 saa7134_dvb,video_buf_dvb,saa7134
    compat_ioctl32 1536 1 saa7134
    ir_kbd_i2c 7184 1 saa7134
    ir_common 30084 2 saa7134,ir_kbd_i2c
    videodev 26752 1 saa7134
    v4l2_common 15744 3 tuner,saa7134,videodev
    v4l1_compat 14084 2 saa7134,videodev
    parport_pc 35556 1
    parport 31304 3 ppdev,lp,parport_pc
    serio_raw 5764 0
    psmouse 35984 0
    snd_atiixp 15884 2
    snd_ac97_codec 95652 1 snd_atiixp
    ac97_bus 2432 1 snd_ac97_codec
    snd_pcm 69124 4 snd_pcm_oss,snd_atiixp,snd_ac97_codec
    snd_timer 19332 3 snd_seq,snd_pcm
    snd 45028 11 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_atiixp,snd_ac97_codec,snd_pcm,snd_timer
    soundcore 6496 1 snd
    snd_page_alloc 7816 2 snd_atiixp,snd_pcm
    rtc_cmos 7328 0
    rtc_core 14984 1 rtc_cmos
    rtc_lib 2944 1 rtc_core
    sg 26652 0
    k8temp 4864 0
    i2c_piix4 7948 0
    i2c_core 20352 8 tda827x,saa7134_dvb,dvb_pll,tda1004x,tuner,saa7134,ir_kbd_i2c,i2c_piix4
    ehci_hcd 30732 0
    tsdev 6720 0
    ati_agp 7308 0
    ohci_hcd 19588 0
    evdev 8192 4
    thermal 10888 0
    fan 3844 0
    button 6160 0
    battery 8324 0
    ac 4100 0
    powernow_k8 13972 0
    freq_table 3984 1 powernow_k8
    processor 24788 2 thermal,powernow_k8
    fglrx 726624 11
    agpgart 27224 2 ati_agp,fglrx
    wlan_scan_sta 12416 0
    ath_rate_sample 13312 1
    ath_pci 104744 0
    wlan 195504 4 wlan_scan_sta,ath_rate_sample,ath_pci
    ath_hal 231264 3 ath_rate_sample,ath_pci
    usbcore 112520 4 usb_storage,ehci_hcd,ohci_hcd
    ext3 119432 3
    jbd 54312 1 ext3
    mbcache 6916 1 ext3
    sr_mod 14756 0
    cdrom 34336 1 sr_mod
    sd_mod 22784 8
    pata_atiixp 5888 2
    sata_sil 8456 4
    ata_generic 5380 0
    libata 108084 3 pata_atiixp,sata_sil,ata_generic
    and dmesg output after a fresh bootup:
    Linux version 2.6.22-ARCH (root@workstation64) (gcc version 4.2.1) #1 SMP PREEMPT Fri Aug 31 19:54:09 UTC 2007
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
    BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)
    BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)
    BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
    127MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000ff780
    Entering add_active_range(0, 0, 262096) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 229376
    HighMem 229376 -> 262096
    early_node_map[1] active PFN ranges
    0: 0 -> 262096
    On node 0 totalpages: 262096
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 1760 pages used for memmap
    Normal zone: 223520 pages, LIFO batch:31
    HighMem zone: 255 pages used for memmap
    HighMem zone: 32465 pages, LIFO batch:7
    DMI 2.3 present.
    ACPI: RSDP 000F90C0, 0014 (r0 ACPIAM)
    ACPI: RSDT 3FFD0000, 0038 (r1 A M I OEMRSDT 7000520 MSFT 97)
    ACPI: FACP 3FFD0200, 0084 (r2 A M I OEMFACP 7000520 MSFT 97)
    ACPI: DSDT 3FFD0430, 397A (r1 0AAAA 0AAAA000 0 INTL 2002026)
    ACPI: FACS 3FFDE000, 0040
    ACPI: APIC 3FFD0390, 005C (r1 A M I OEMAPIC 7000520 MSFT 97)
    ACPI: MCFG 3FFD03F0, 003C (r1 A M I OEMMCFG 7000520 MSFT 97)
    ACPI: SSDT 3FFD3DB0, 0D6E (r1 ATI ATIPATCH 1 INTL 2002026)
    ACPI: OEMB 3FFDE040, 0056 (r1 A M I AMI_OEM 7000520 MSFT 97)
    ATI board detected. Disabling timer routing over 8254.
    ACPI: PM-Timer IO Port: 0x808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 15:7 APIC version 16
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000)
    Built 1 zonelists. Total pages: 260049
    Kernel command line: root=/dev/sda1 rootfstype=ext3 ro vga=795 clock=pit
    Warning! clock= boot option is deprecated. Use clocksource=xyz
    mapped APIC to ffffd000 (fee00000)
    mapped IOAPIC to ffffc000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Detected 2189.023 MHz processor.
    Console: colour dummy device 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 1034320k/1048384k available (2393k kernel code, 13332k reserved, 783k data, 304k init, 130880k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff82000 - 0xfffff000 ( 500 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    .init : 0xc0421000 - 0xc046d000 ( 304 kB)
    .data : 0xc035641f - 0xc041a1bc ( 783 kB)
    .text : 0xc0100000 - 0xc035641f (2393 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 4382.14 BogoMIPS (lpj=7301039)
    Security Framework v1.0.0 initialized
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 11k freed
    Early unpacking initramfs... done
    ACPI: Core revision 20070126
    ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    CPU0: AMD Athlon(tm) 64 Processor 3700+ stepping 01
    Total of 1 processors activated (4382.14 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    ..MP-BIOS bug: 8254 timer not connected to IO-APIC
    ...trying to set up timer (IRQ0) through the 8259A ... failed.
    ...trying to set up timer as Virtual Wire IRQ... works.
    Brought up 1 CPUs
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
    PCI: Not using MMCONFIG.
    PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    PCI: Transparent bridge - 0000:00:14.4
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    SCSI subsystem initialized
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    pnp: 00:08: iomem range 0xfff80000-0xffffffff could not be reserved
    pnp: 00:0b: ioport range 0xe00-0xe7f has been reserved
    pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
    pnp: 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
    pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
    pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
    pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved
    pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
    pnp: 00:0e: iomem range 0x100000-0x3fffffff could not be reserved
    Time: pit clocksource has been installed.
    PCI: Bridge: 0000:00:02.0
    IO window: 7000-7fff
    MEM window: ff200000-ff2fffff
    PREFETCH window: bff00000-dfefffff
    PCI: Bridge: 0000:00:14.4
    IO window: 8000-8fff
    MEM window: ff300000-ff3fffff
    PREFETCH window: 50000000-500fffff
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
    TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    checking if image is initramfs... it is
    Freeing initrd memory: 481k freed
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Installing knfsd (copyright (C) 1996 [email protected]).
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Boot video device is 0000:01:00.0
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:02.0:pcie00]
    vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 7680k, total 262144k
    vesafb: mode is 1280x1024x24, linelength=3840, pages=67
    vesafb: protected mode interface info at c000:5977
    vesafb: pmi: set display start = c00c5a0b, set palette = c00c5a57
    vesafb: pmi: ports = 7810 7816 7854 7838 783c 785c 7800 7804 78b0 78b2 78b4
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    Console: switching to colour frame buffer device 160x64
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    loop: module loaded
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard as /class/input/input1
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    Freeing unused kernel memory: 304k freed
    libata version 2.21 loaded.
    sata_sil 0000:00:11.0: version 2.2
    ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 16
    scsi0 : sata_sil
    scsi1 : sata_sil
    ata1: SATA max UDMA/100 cmd 0xf881ec80 ctl 0xf881ec8a bmdma 0xf881ec00 irq 16
    ata2: SATA max UDMA/100 cmd 0xf881ecc0 ctl 0xf881ecca bmdma 0xf881ec08 irq 16
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
    ata1.00: 312581808 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/100
    ata2: SATA link down (SStatus 0 SControl 300)
    scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10.0 PQ: 0 ANSI: 5
    ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 17
    scsi2 : sata_sil
    scsi3 : sata_sil
    ata3: SATA max UDMA/100 cmd 0xf8826880 ctl 0xf882688a bmdma 0xf8826800 irq 17
    ata4: SATA max UDMA/100 cmd 0xf88268c0 ctl 0xf88268ca bmdma 0xf8826808 irq 17
    ata3: SATA link down (SStatus 0 SControl 300)
    ata4: SATA link down (SStatus 0 SControl 300)
    ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:14.1 to 64
    scsi4 : pata_atiixp
    scsi5 : pata_atiixp
    ata5: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ff00 irq 14
    ata6: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ff08 irq 15
    sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 < sda5 > sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    ata5.00: ATA-6: ST3160021A, 8.01, max UDMA/100
    ata5.00: 312581808 sectors, multi 16: LBA48
    ata5.00: configured for UDMA/100
    ata6.00: ATAPI: _NEC DVD_RW ND-3530A, 2.01, max UDMA/33
    ata6.00: configured for UDMA/33
    scsi 4:0:0:0: Direct-Access ATA ST3160021A 8.01 PQ: 0 ANSI: 5
    sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
    sd 4:0:0:0: [sdb] Write Protect is off
    sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
    sd 4:0:0:0: [sdb] Write Protect is off
    sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdb: sdb1 sdb2 sdb3 sdb4
    sd 4:0:0:0: [sdb] Attached SCSI disk
    scsi 5:0:0:0: CD-ROM _NEC DVD_RW ND-3530A 2.01 PQ: 0 ANSI: 5
    sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 5:0:0:0: Attached scsi CD-ROM sr0
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ath_hal: module license 'Proprietary' taints kernel.
    ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    wlan: 0.8.4.2 (0.9.4)
    ath_pci: 0.9.4.5 (0.9.4)
    ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 19
    ath_pci: switching rfkill capability off
    ath_rate_sample: 1.2 (0.9.4)
    ath_pci: switching per-packet transmit power control off
    wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
    wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
    wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
    wifi0: H/W encryption support: WEP AES AES_CCM TKIP
    wifi0: mac 7.9 phy 4.5 radio 5.6
    wifi0: Use hw queue 1 for WME_AC_BE traffic
    wifi0: Use hw queue 0 for WME_AC_BK traffic
    wifi0: Use hw queue 2 for WME_AC_VI traffic
    wifi0: Use hw queue 3 for WME_AC_VO traffic
    wifi0: Use hw queue 8 for CAB traffic
    wifi0: Use hw queue 9 for beacons
    wifi0: Atheros 5212: mem=0xff3f0000, irq=19
    Linux agpgart interface v0.102 (c) Dave Jones
    [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
    [fglrx] USWC is disabled in module parameters
    [fglrx] PAT is disabled!
    [fglrx] module loaded - fglrx 8.40.4 [Jul 31 2007] on minor 0
    ACPI: duty_cycle spans bit 4
    ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
    powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ processors (version 2.00.00)
    powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x6
    powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x8
    powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa
    powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
    input: Power Button (FF) as /class/input/input2
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /class/input/input3
    ACPI: Power Button (CM) [PWRB]
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 20
    ohci_hcd 0000:00:13.0: OHCI Host Controller
    ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
    ohci_hcd 0000:00:13.0: irq 20, io mem 0xff6fe000
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 20
    ohci_hcd 0000:00:13.1: OHCI Host Controller
    ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:13.1: irq 20, io mem 0xff6fd000
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 4 ports detected
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sd 4:0:0:0: Attached scsi generic sg1 type 0
    sr 5:0:0:0: Attached scsi generic sg2 type 5
    ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 20
    ehci_hcd 0000:00:13.2: EHCI Host Controller
    ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
    ehci_hcd 0000:00:13.2: irq 20, io mem 0xff6fc000
    ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 8 ports detected
    piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
    usb 3-2: new high speed USB device using ehci_hcd and address 2
    usb 3-2: configuration #1 chosen from 1 choice
    usb 2-3: new full speed USB device using ohci_hcd and address 2
    rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month
    PPP generic driver version 2.4.2
    8139too Fast Ethernet driver 0.9.28
    ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 19
    eth0: RealTek RTL8139 at 0xf913e400, 00:13:d3:8b:9e:89, IRQ 19
    eth0: Identified 8139 chip type 'RTL-8100B/8139D'
    8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
    usb 2-3: configuration #1 chosen from 1 choice
    ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 21
    firewire_ohci: Added fw-ohci device 0000:02:04.0, OHCI version 1.10
    ACPI: PCI Interrupt 0000:00:14.5[b] -> GSI 17 (level, low) -> IRQ 22
    firewire_core: created new fw device fw0 (0 config rom retries)
    input: PC Speaker as /class/input/input4
    input: ImExPS/2 Logitech Wheel Mouse as /class/input/input5
    parport_pc 00:07: reported by Plug and Play ACPI
    parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Initializing USB Mass Storage driver...
    scsi6 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    scsi7 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    Linux video capture interface: v2.00
    saa7130/34: v4l2 driver version 0.2.14 loaded
    ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 21
    saa7133[0]: found at 0000:02:01.0, rev: 208, irq: 21, latency: 64, mmio: 0xff3ef800
    saa7133[0]: subsystem: 1043:4857, board: ASUSTeK P7131 Dual [card=78,autodetected]
    saa7133[0]: board init: gpio is 0
    input: saa7134 IR (ASUSTeK P7131 Dual) as /class/input/input6
    saa7133[0]: i2c eeprom 00: 43 10 57 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
    saa7133[0]: i2c eeprom 10: 00 01 20 00 ff 20 ff ff ff ff ff ff ff ff ff ff
    saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 cb ff ff ff ff
    saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 00 ff ff ff ff ff ff
    saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    tuner 1-004b: chip found @ 0x96 (saa7133[0])
    tuner 1-004b: setting tuner address to 61
    tuner 1-004b: type set to tda8290+75a
    lp0: using parport0 (interrupt-driven).
    ppdev: user-space parallel port driver
    tuner 1-004b: setting tuner address to 61
    tuner 1-004b: type set to tda8290+75a
    saa7133[0]: registered device video0 [v4l2]
    saa7133[0]: registered device vbi0
    saa7133[0]: registered device radio0
    DVB: registering new adapter (saa7133[0]).
    DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
    tda1004x: setting up plls for 48MHz sampling clock
    scsi 6:0:0:0: Direct-Access Seagate External Drive PQ: 0 ANSI: 0
    sd 6:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB)
    sd 6:0:0:0: [sdc] Write Protect is off
    sd 6:0:0:0: [sdc] Mode Sense: 27 00 00 00
    sd 6:0:0:0: [sdc] Assuming drive cache: write through
    sd 6:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB)
    sd 6:0:0:0: [sdc] Write Protect is off
    sd 6:0:0:0: [sdc] Mode Sense: 27 00 00 00
    sd 6:0:0:0: [sdc] Assuming drive cache: write through
    sdc: sdc1
    sd 6:0:0:0: [sdc] Attached SCSI disk
    sd 6:0:0:0: Attached scsi generic sg3 type 0
    usb-storage: device scan complete
    scsi 7:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
    sd 7:0:0:0: [sdd] Attached SCSI removable disk
    sd 7:0:0:0: Attached scsi generic sg4 type 0
    scsi 7:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
    sd 7:0:0:1: [sde] Attached SCSI removable disk
    sd 7:0:0:1: Attached scsi generic sg5 type 0
    scsi 7:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
    sd 7:0:0:2: [sdf] Attached SCSI removable disk
    sd 7:0:0:2: Attached scsi generic sg6 type 0
    scsi 7:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
    sd 7:0:0:3: [sdg] Attached SCSI removable disk
    sd 7:0:0:3: Attached scsi generic sg7 type 0
    usb-storage: device scan complete
    tda1004x: found firmware revision 29 -- ok
    EXT3 FS on sda1, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sdb4, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda4, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Adding 522072k swap on /dev/disk/by-path/pci-0000:00:11.0-scsi-0:0:0:0-part5. Priority:-1 extents:1 across:522072k
    ip_tables: (C) 2000-2006 Netfilter Core Team
    Netfilter messages via NETLINK v0.30.
    nf_conntrack version 0.5.0 (8190 buckets, 65520 max)
    eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    Unknown InputIN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:11:6b:27:96:74:08:00 SRC=192.168.123.254 DST=255.255.255.255 LEN=331 TOS=0x00 PREC=0x00 TTL=64 ID=64771 PROTO=UDP SPT=67 DPT=68 LEN=311
    Unknown InputIN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:11:6b:27:96:74:08:00 SRC=192.168.123.254 DST=255.255.255.255 LEN=331 TOS=0x00 PREC=0x00 TTL=64 ID=65027 PROTO=UDP SPT=67 DPT=68 LEN=311
    Marking TSC unstable due to: cpufreq changes.
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=48113 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=48113 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=48113 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=48113 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=48113 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=48113 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=48114 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=48117 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Clocksource tsc unstable (delta = -90943342 ns)
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    My router's IP is 192.168.123.254 but if I ping that address or I try to connect to the web interface on that address to configure the router I can't get any connection...  I've also tried to specify all paramaters directly in rc.conf (eth0="eth0 192.168.123.1 netmask 255.255.255.0 broadcast 192.168.123.255") but that didn't help neither.
    I'm kind of out of ideas on how to solve this... I hope someone here will help me getting out of windows (the only OS on my pc with internet FTM).

    I'm so stupid... I should've thought about iptables... I'm reconfiguring them now, thank you very much!

  • Diagnose stuttering?

    Hello,
    there is some strange behaviour of my laptop which makes me think it is ill. It is a kind of stuttering. Don't get me wrong, I can do my work with it normally, but I think my system isn't running perfectly.
    Symptoms:
    1. Jackd is reporting xruns. They occur quite often. About 50-70 times while playing the guitar for about 30 minutes. Furthermore the 'RT' sign in qjackctl is flashing on and off instantly every 1-2 seconds or so. Of course the realtime options is enabled. The preferences are set such that there is a delay of about 20ms.
    2. When executing 'ifconfig eth0 down/up' or changing the network profiles with netcfg2 while moving the mouse, I can notice some mouse cursor stuttering.
    3. When watching a youtube video in Firefox it (the video) is often stuttering 0.5-1s at the beginning while noticing harddisk activity ( Flashing LED).
    I never cared about the last two points but since I played around with Jack it is starting to bother me.
    I don't know if these symptoms are caused by the same problem. But my first thought is that is has something to do with disk access. It seems logical to me that while writing to the harddisk the system has to stay in sleep meanwhile. So I changed to deadline scheduler, but it doesn't really improve the situation. Moreover if disk access would be the reason it would be the same for all the other Jack Notebook users.
    Maybe you experienced similiar things or know a solution for this.
    Here are some hardware specs:
    Notebook Asus M67n
    Centrino Pentium M 1,5 Ghz
    Harddisk Samsung 160GB ~5400 u/min
    2 GB Ram
    Ati Radeon Mobility 9700 64MB
    And some more system information
    lsmod
    [kde4@m67n ~]$ lsmod
    Module Size Used by
    snd_usb_audio 81920 0
    snd_usb_lib 17024 1 snd_usb_audio
    snd_rawmidi 21504 1 snd_usb_lib
    snd_hwdep 8964 1 snd_usb_audio
    radeon 144416 2
    drm 74280 3 radeon
    cpufreq_ondemand 8588 0
    usbhid 46016 0
    hid 41856 1 usbhid
    ff_memless 6664 1 usbhid
    joydev 11584 0
    ppdev 9348 0
    lp 11108 0
    pcspkr 4352 0
    ohci1394 30256 0
    ieee1394 80452 1 ohci1394
    video 18064 0
    output 4608 1 video
    parport_pc 36804 1
    parport 33004 3 ppdev,lp,parport_pc
    irda 112568 0
    crc_ccitt 3840 1 irda
    psmouse 38288 0
    i2c_i801 10768 0
    serio_raw 7172 0
    i2c_core 22420 1 i2c_i801
    sr_mod 16708 0
    cdrom 35360 1 sr_mod
    sg 28852 0
    ehci_hcd 36236 0
    intel_agp 27068 1
    agpgart 30804 2 drm,intel_agp
    uhci_hcd 24080 0
    shpchp 31380 0
    pci_hotplug 28064 1 shpchp
    thermal 17052 2
    evdev 11296 11
    fan 6148 0
    button 7824 0
    battery 12036 1
    ac 6020 0
    vboxdrv 115112 0
    asus_acpi 15772 0
    snd_seq_oss 31872 0
    snd_seq_midi_event 8192 1 snd_seq_oss
    snd_seq 49968 7 snd_seq_oss,snd_seq_midi_event
    snd_seq_device 8332 3 snd_rawmidi,snd_seq_oss,snd_seq
    snd_intel8x0 30748 0
    snd_ac97_codec 100516 1 snd_intel8x0
    snd_pcm_oss 40192 0
    snd_pcm 69636 4 snd_usb_audio,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
    snd_timer 21384 2 snd_seq,snd_pcm
    snd_page_alloc 9224 2 snd_intel8x0,snd_pcm
    snd_mixer_oss 16512 1 snd_pcm_oss
    snd 50724 13 snd_usb_audio,snd_rawmidi,snd_hwdep,snd_seq_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
    soundcore 8160 1 snd
    ac97_bus 3584 1 snd_ac97_codec
    usblp 13824 0
    usbcore 134384 7 snd_usb_audio,snd_usb_lib,usbhid,ehci_hcd,uhci_hcd,usblp
    loop 16140 0
    ipw2200 141640 0
    ieee80211 29512 1 ipw2200
    ieee80211_crypt 6532 1 ieee80211
    tg3 121604 0
    libphy 18048 1 tg3
    acpi_cpufreq 12940 0
    freq_table 5632 2 cpufreq_ondemand,acpi_cpufreq
    processor 34732 3 thermal,acpi_cpufreq
    rtc_cmos 11424 0
    rtc_core 17564 1 rtc_cmos
    rtc_lib 4480 1 rtc_core
    jfs 176492 2
    sd_mod 27160 4
    ata_piix 18308 3
    pata_acpi 6016 0
    libata 153888 2 ata_piix,pata_acpi
    scsi_mod 96460 4 sr_mod,sg,sd_mod,libata
    dock 9616 1 libata
    [kde4@m67n ~]$ cat /proc/interrupts
    CPU0
    0: 1768365 XT-PIC-XT timer
    1: 8183 XT-PIC-XT i8042
    2: 0 XT-PIC-XT cascade
    4: 337446 XT-PIC-XT ipw2200, Intel 82801DB-ICH4, eth0
    5: 130988 XT-PIC-XT uhci_hcd:usb2
    7: 1 XT-PIC-XT parport0
    8: 2 XT-PIC-XT rtc0
    9: 6305 XT-PIC-XT acpi
    10: 6 XT-PIC-XT ehci_hcd:usb3, uhci_hcd:usb4, ohci1394
    11: 1562856 XT-PIC-XT uhci_hcd:usb1, radeon@pci:0000:01:00.0
    12: 611 XT-PIC-XT i8042
    14: 33188 XT-PIC-XT ata_piix
    15: 73880 XT-PIC-XT ata_piix
    NMI: 0 Non-maskable interrupts
    LOC: 771268 Local timer interrupts
    RES: 0 Rescheduling interrupts
    CAL: 0 function call interrupts
    TLB: 0 TLB shootdowns
    TRM: 0 Thermal event interrupts
    SPU: 0 Spurious interrupts
    ERR: 0
    MIS: 0
    hwd -e
    1180:0476 CardBus bridge: Ricoh Co Ltd module: -
    RL5c476 II
    1180:0476 CardBus bridge: Ricoh Co Ltd module: -
    RL5c476 II
    14e4:169c Ethernet controller: Broadcom Corporation module: tg3
    NetXtreme BCM5788 Gigabit Ethernet
    1180:0552 FireWire (IEEE 1394): Ricoh Co Ltd module: ohci1394
    R5C552 IEEE 1394 Controller
    8086:3340 Host bridge: Intel Corporation module: agpgart-intel
    82855PM Processor to I/O Controller
    8086:24ca IDE interface: Intel Corporation module: ata_piix
    82801DBM (ICH4-M) IDE Controller
    8086:24cc ISA bridge: Intel Corporation module: -
    82801DBM (ICH4-M) LPC Interface Bridge
    8086:24c6 Modem: Intel Corporation module: -
    82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller
    8086:24c5 Multimedia audio controller: Intel Corporation module: snd_intel8x0
    82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller
    8086:4220 Network controller: Intel Corporation module: ipw2200
    PRO/Wireless 2200BG [Calexico2] Network Connection
    8086:2448 PCI bridge: Intel Corporation module: -
    82801 Mobile PCI Bridge
    8086:3341 PCI bridge: Intel Corporation module: -
    82855PM Processor to AGP Controller
    8086:24c3 SMBus: Intel Corporation module: i801_smbus
    82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller
    8086:24c2 USB Controller: Intel Corporation module: uhci_hcd
    82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
    8086:24c4 USB Controller: Intel Corporation module: uhci_hcd
    82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
    8086:24c7 USB Controller: Intel Corporation module: uhci_hcd
    82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
    8086:24cd USB Controller: Intel Corporation module: ehci_hcd
    82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller
    1002:4e50 VGA compatible controller: ATI Technologies Inc module: fglrx
    RV350 [Mobility Radeon 9600 M10]
    dmesg
    Linux version 2.6.27-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Sun Dec 21 09:31:10 UTC 2008
    PAT WC disabled due to known CPU erratum.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007ff40000 (usable)
    BIOS-e820: 000000007ff40000 - 000000007ff50000 (ACPI data)
    BIOS-e820: 000000007ff50000 - 0000000080000000 (ACPI NVS)
    DMI 2.3 present.
    AMI BIOS detected: BIOS may corrupt low RAM, working it around.
    last_pfn = 0x7ff40 max_arch_pfn = 0x100000
    kernel direct mapping tables up to 38000000 @ 10000-15000
    RAMDISK: 7fe5f000 - 7ff2f732
    Allocated new RAMDISK: 00511000 - 005e1732
    Move RAMDISK from 000000007fe5f000 - 000000007ff2f731 to 00511000 - 005e1731
    ACPI: RSDP 000F5DF0, 0014 (r0 ACPIAM)
    ACPI: RSDT 7FF40000, 002C (r1 A M I OEMRSDT 9000406 MSFT 97)
    ACPI: FACP 7FF40200, 0081 (r1 A M I OEMFACP 9000406 MSFT 97)
    ACPI: DSDT 7FF40400, 629D (r1 1ABSP 1ABSP001 1 MSFT 2000001)
    ACPI: FACS 7FF50000, 0040
    ACPI: OEMB 7FF50040, 0053 (r1 A M I OEMBIOS 9000406 MSFT 97)
    1151MB HIGHMEM available.
    896MB LOWMEM available.
    mapped low ram: 0 - 38000000
    low ram: 00000000 - 38000000
    bootmap 00011000 - 00018000
    (9 early reservations) ==> bootmem [0000000000 - 0038000000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0000100000 - 000050d240] TEXT DATA BSS ==> [0000100000 - 000050d240]
    #4 [000050e000 - 0000511000] INIT_PG_TABLE ==> [000050e000 - 0000511000]
    #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
    #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
    #7 [0000511000 - 00005e1732] NEW RAMDISK ==> [0000511000 - 00005e1732]
    #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    Normal 0x00001000 -> 0x00038000
    HighMem 0x00038000 -> 0x0007ff40
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0007ff40
    On node 0 totalpages: 523983
    free_area_init_node: node 0, pgdat c03da300, node_mem_map c1000200
    DMA zone: 3951 pages, LIFO batch:0
    Normal zone: 223520 pages, LIFO batch:31
    HighMem zone: 292417 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x408
    SMP: Allowing 1 CPUs, 0 hotplug CPUs
    Found and enabled local APIC!
    mapped APIC to ffffb000 (fee00000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Allocating PCI resources starting at 88000000 (gap: 80000000:80000000)
    PERCPU: Allocating 39324 bytes of per cpu data
    NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519888
    Kernel command line: root=/dev/sda2 ro acpi_sleep=s3_bios
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    TSC: PIT calibration confirmed by PMTIMER.
    TSC: using PMTIMER calibration value
    Detected 1500.049 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 2072868k/2096384k available (2157k kernel code, 22276k reserved, 843k data, 284k init, 1178880k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    .init : 0xc03f5000 - 0xc043c000 ( 284 kB)
    .data : 0xc031b6d6 - 0xc03ee320 ( 843 kB)
    .text : 0xc0100000 - 0xc031b6d6 (2157 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3001.10 BogoMIPS (lpj=5000163)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20080609
    ACPI: Checking initramfs for custom DSDT
    ACPI: setting ELCR to 0200 (from 0c30)
    weird, boot CPU (#0) not listedby the BIOS.
    SMP motherboard not detected.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (3001.10 BogoMIPS).
    net_namespace: 832 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
    PCI: Using configuration type 1 for base access
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: 0000:00:00.0 reg 10 32bit mmio: [e0000000, efffffff]
    PCI: 0000:00:1d.0 reg 20 io port: [e800, e81f]
    PCI: 0000:00:1d.1 reg 20 io port: [e880, e89f]
    PCI: 0000:00:1d.2 reg 20 io port: [ec00, ec1f]
    PCI: 0000:00:1d.7 reg 10 32bit mmio: [ffaffc00, ffafffff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    HPET not enabled in BIOS. You might try hpet=force boot option
    pci 0000:00:1f.0: Enabled i801 SMBus device
    pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH4 GPIO
    PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
    PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
    PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
    PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
    PCI: 0000:00:1f.1 reg 20 io port: [ffa0, ffaf]
    PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff]
    PCI: 0000:00:1f.3 reg 20 io port: [540, 55f]
    PCI: 0000:00:1f.5 reg 10 io port: [ee00, eeff]
    PCI: 0000:00:1f.5 reg 14 io port: [e000, e03f]
    PCI: 0000:00:1f.5 reg 18 32bit mmio: [ffaff800, ffaff9ff]
    PCI: 0000:00:1f.5 reg 1c 32bit mmio: [ffaff400, ffaff4ff]
    pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
    pci 0000:00:1f.5: PME# disabled
    PCI: 0000:00:1f.6 reg 10 io port: [e400, e4ff]
    PCI: 0000:00:1f.6 reg 14 io port: [e080, e0ff]
    pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
    pci 0000:00:1f.6: PME# disabled
    PCI: 0000:01:00.0 reg 10 32bit mmio: [d0000000, d7ffffff]
    PCI: 0000:01:00.0 reg 14 io port: [d800, d8ff]
    PCI: 0000:01:00.0 reg 18 32bit mmio: [ff8f0000, ff8fffff]
    PCI: 0000:01:00.0 reg 30 32bit mmio: [ff8c0000, ff8dffff]
    pci 0000:01:00.0: supports D1
    pci 0000:01:00.0: supports D2
    PCI: bridge 0000:00:01.0 io port: [d000, dfff]
    PCI: bridge 0000:00:01.0 32bit mmio: [ff800000, ff8fffff]
    PCI: bridge 0000:00:01.0 32bit mmio pref: [ce900000, de9fffff]
    PCI: 0000:02:00.0 reg 10 32bit mmio: [ff9f0000, ff9fffff]
    pci 0000:02:00.0: PME# supported from D3hot D3cold
    pci 0000:02:00.0: PME# disabled
    PCI: 0000:02:01.0 reg 10 32bit mmio: [0, fff]
    pci 0000:02:01.0: supports D1
    pci 0000:02:01.0: supports D2
    pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:01.0: PME# disabled
    PCI: 0000:02:01.1 reg 10 32bit mmio: [0, fff]
    pci 0000:02:01.1: supports D1
    pci 0000:02:01.1: supports D2
    pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:01.1: PME# disabled
    PCI: 0000:02:01.2 reg 10 32bit mmio: [ff9ef800, ff9effff]
    pci 0000:02:01.2: PME# supported from D0 D3hot D3cold
    pci 0000:02:01.2: PME# disabled
    PCI: 0000:02:02.0 reg 10 32bit mmio: [ff9ee000, ff9eefff]
    pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
    pci 0000:02:02.0: PME# disabled
    pci 0000:00:1e.0: transparent bridge
    PCI: bridge 0000:00:1e.0 32bit mmio: [ff900000, ff9fffff]
    PCI: bridge 0000:00:1e.0 32bit mmio pref: [dea00000, deafffff]
    bus 00 -> node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 11 12)
    ACPI: PCI Interrupt Link [LNKC] (IRQs *10 12)
    ACPI: PCI Interrupt Link [LNKD] (IRQs *5 6 10)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 6 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 7) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 *10 12)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:09: ioport range 0x480-0x48f has been reserved
    system 00:09: ioport range 0x5c0-0x5cf has been reserved
    system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
    system 00:0c: iomem range 0xffc00000-0xffefffff has been reserved
    system 00:0d: ioport range 0x540-0x55f has been reserved
    system 00:0d: ioport range 0x400-0x47f has been reserved
    system 00:0d: ioport range 0x480-0x48f has been reserved
    system 00:0d: ioport range 0x500-0x53f has been reserved
    system 00:0d: ioport range 0x4c0-0x4cf has been reserved
    system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
    system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
    system 00:0e: iomem range 0x0-0x9ffff could not be reserved
    system 00:0e: iomem range 0xc0000-0xdffff could not be reserved
    system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
    system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0xd000-0xdfff
    pci 0000:00:01.0: MEM window: 0xff800000-0xff8fffff
    pci 0000:00:01.0: PREFETCH window: 0x000000ce900000-0x000000de9fffff
    pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
    pci 0000:02:01.0: IO window: 0x001000-0x0010ff
    pci 0000:02:01.0: IO window: 0x001400-0x0014ff
    pci 0000:02:01.0: PREFETCH window: 0x8c000000-0x8fffffff
    pci 0000:02:01.0: MEM window: 0x90000000-0x93ffffff
    pci 0000:02:01.1: CardBus bridge, secondary bus 0000:07
    pci 0000:02:01.1: IO window: 0x001800-0x0018ff
    pci 0000:02:01.1: IO window: 0x001c00-0x001cff
    pci 0000:02:01.1: PREFETCH window: 0x94000000-0x97ffffff
    pci 0000:02:01.1: MEM window: 0x98000000-0x9bffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:1e.0: IO window: 0x1000-0x1fff
    pci 0000:00:1e.0: MEM window: 0xff900000-0xff9fffff
    pci 0000:00:1e.0: PREFETCH window: 0x000000dea00000-0x000000deafffff
    pci 0000:00:1e.0: enabling device (0106 -> 0107)
    pci 0000:00:1e.0: setting latency timer to 64
    pci 0000:02:01.0: enabling device (0000 -> 0003)
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 4
    PCI: setting IRQ 4 as level-triggered
    pci 0000:02:01.0: PCI INT A -> Link[LNKB] -> GSI 4 (level, low) -> IRQ 4
    pci 0000:02:01.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    pci 0000:02:01.1: PCI INT B -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:02:01.1: setting latency timer to 64
    bus: 00 index 0 io port: [0, ffff]
    bus: 00 index 1 mmio: [0, ffffffff]
    bus: 01 index 0 io port: [d000, dfff]
    bus: 01 index 1 mmio: [ff800000, ff8fffff]
    bus: 01 index 2 mmio: [ce900000, de9fffff]
    bus: 01 index 3 mmio: [0, 0]
    bus: 02 index 0 io port: [1000, 1fff]
    bus: 02 index 1 mmio: [ff900000, ff9fffff]
    bus: 02 index 2 mmio: [dea00000, deafffff]
    bus: 02 index 3 io port: [0, ffff]
    bus: 02 index 4 mmio: [0, ffffffff]
    bus: 03 index 0 io port: [1000, 10ff]
    bus: 03 index 1 io port: [1400, 14ff]
    bus: 03 index 2 mmio: [8c000000, 8fffffff]
    bus: 03 index 3 mmio: [90000000, 93ffffff]
    bus: 07 index 0 io port: [1800, 18ff]
    bus: 07 index 1 io port: [1c00, 1cff]
    bus: 07 index 2 mmio: [94000000, 97ffffff]
    bus: 07 index 3 mmio: [98000000, 9bffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 833k freed
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1749
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:01:00.0: Boot video device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver4 ports, IRQ sharing disabled
    serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
    serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 4 (level, low) -> IRQ 4
    serial 0000:00:1f.6: PCI INT B disabled
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 284k freed
    input: AT Translated Set 2 keyboard as /class/input/input1
    Switched to high resolution mode on CPU 0
    No dock devices found.
    SCSI subsystem initialized
    libata version 3.00 loaded.
    pata_acpi 0000:00:1f.1: enabling device (0005 -> 0007)
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    pata_acpi 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
    pata_acpi 0000:00:1f.1: setting latency timer to 64
    pata_acpi 0000:00:1f.1: PCI INT A disabled
    ata_piix 0000:00:1f.1: version 2.12
    ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
    ata_piix 0000:00:1f.1: setting latency timer to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
    ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
    ata1.00: ATA-8: SAMSUNG HM160HC, LQ100-10, max UDMA/100
    ata1.00: 312581808 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/100
    ata2.00: ATAPI: TOSHIBA ODD-DVD SD-R6372, 1732, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160HC LQ10 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM TOSHIBA ODD-DVD SD-R6372 1732 PQ: 0 ANSI: 5
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    JFS: nTxBlock = 8192, nTxLock = 65536
    rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month
    ACPI: Invalid PBLK length [7]
    ACPI: CPU0 (power states: C1[C1] C2[C2])
    processor ACPI0007:00: registered as cooling_device0
    Marking TSC unstable due to TSC halts in idle
    tg3.c:v3.94 (August 14, 2008)
    tg3 0000:02:00.0: PCI INT A -> Link[LNKB] -> GSI 4 (level, low) -> IRQ 4
    eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:11:2f:48:63:7b
    eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
    eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
    ieee80211_crypt: registered algorithm 'NULL'
    ieee80211: 802.11 data/management/control stack, git-1.1.13
    ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
    ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
    ipw2200: Copyright(c) 2003-2006 Intel Corporation
    ipw2200 0000:02:02.0: PCI INT A -> Link[LNKB] -> GSI 4 (level, low) -> IRQ 4
    ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
    firmware: requesting ipw2200-bss.fw
    ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
    loop: module loaded
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    usbcore: registered new interface driver usblp
    Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 4 (level, low) -> IRQ 4
    Intel ICH 0000:00:1f.5: setting latency timer to 64
    intel8x0_measure_ac97_clock: measured 52750 usecs
    intel8x0: clocking to 48000
    Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 4 (level, low) -> IRQ 4
    Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
    MC'97 1 converters and GPIO not ready (0xff00)
    Asus Laptop ACPI Extras version 0.30
    M6NE model detected, supported
    vboxdrv: Trying to deactivate the NMI watchdog permanently...
    vboxdrv: Successfully done.
    vboxdrv: Found 1 processor cores.
    vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    vboxdrv: Successfully loaded version 2.1.0 (interface 0x000a0008).
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery absent)
    ACPI: Battery Slot [BAT1] (battery absent)
    input: Power Button (FF) as /class/input/input2
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input3
    ACPI: Lid Switch [LID]
    input: Sleep Button (CM) as /class/input/input4
    ACPI: Sleep Button (CM) [SLPB]
    input: Power Button (CM) as /class/input/input5
    ACPI: Power Button (CM) [PWRB]
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THRM] (63 C)
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    USB Universal Host Controller Interface driver v3.0
    uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000e800
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    Linux agpgart interface v0.103
    Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
    agpgart-intel 0000:00:00.0: Intel 855PM Chipset
    agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
    PCI: setting IRQ 5 as level-triggered
    uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.1: irq 5, io base 0x0000e880
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    iTCO_vendor_support: vendor-support=0
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
    iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x0460)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    scsi 1:0:0:0: Attached scsi generic sg1 type 5
    Driver 'sr' needs updating - please use bus_type methods
    sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
    ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: irq 10, io mem 0xffaffc00
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 6 ports detected
    intel_rng: FWH not detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000ec00
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 4 (level, low) -> IRQ 4
    usb 2-1: new low speed USB device using uhci_hcd and address 2
    usb 2-1: configuration #1 chosen from 1 choice
    Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0
    input: SynPS/2 Synaptics TouchPad as /class/input/input6
    NET: Registered protocol family 23
    parport_pc 00:08: reported by Plug and Play ACPI
    parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
    nsc-ircc, chip->init
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    nsc_ircc_open(), can't get iobase of 0x2f8
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    nsc_ircc_open(), can't get iobase of 0x2f8
    nsc-ircc 00:07: disabled
    ACPI: \_SB_.PCI0.IDE0.CHN1.DRV0: found ejectable bay
    ACPI: \_SB_.PCI0.IDE0.CHN1.DRV0: Adding notify handler
    ACPI: Error installing bay notify handler
    input: Video Bus as /class/input/input7
    ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    ohci1394 0000:02:01.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
    input: PC Speaker as /class/input/input8
    ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[ff9ef800-ff9effff] Max Packet=[2048] IR/IT contexts=[4/4]
    lp0: using parport0 (interrupt-driven).
    ppdev: user-space parallel port driver
    usbcore: registered new interface driver hiddev
    input: Logitech Optical USB Mouse as /class/input/input9
    input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800031d0e5a]
    Adding 979956k swap on /dev/sda4. Priority:-1 extents:1 across:979956k
    Clocksource tsc unstable (delta = -299997836 ns)
    warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
    [drm] Initialized drm 1.1.0 20060810
    [drm] Initialized radeon 1.29.0 20080528 on minor 0
    agpgart-intel 0000:00:00.0: AGP 2.0 bridge
    agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
    pci 0000:01:00.0: putting AGP V2 device into 4x mode
    [drm] Setting GART location based on new memory map
    [drm] Loading R300 Microcode
    [drm] Num pipes: 1
    [drm] writeback test succeeded in 2 usecs
    tg3: eth0: Link is up at 100 Mbps, full duplex.
    tg3: eth0: Flow control is on for TX and on for RX.
    ata1.00: configured for UDMA/100
    ata1: EH complete
    sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    iTCO_wdt: Watchdog Module Unloaded.
    iTCO_vendor_support: Module Unloaded
    Intel ICH Modem 0000:00:1f.6: PCI INT B disabled
    usb 1-1: new full speed USB device using uhci_hcd and address 2
    usb 1-1: configuration #1 chosen from 1 choice
    usb 1-1: reset full speed USB device using uhci_hcd and address 2
    usb 1-1: device firmware changed
    usb 1-1: USB disconnect, address 2
    usb 1-1: new full speed USB device using uhci_hcd and address 3
    usb 1-1: configuration #1 chosen from 1 choice
    usbcore: registered new interface driver snd-usb-audio
    tg3: eth0: Link is up at 100 Mbps, full duplex.
    tg3: eth0: Flow control is on for TX and on for RX.
    tg3: eth0: Link is up at 100 Mbps, full duplex.
    tg3: eth0: Flow control is on for TX and on for RX.
    Please tell me if you ned any more data.
    Greets redbit
    Last edited by redbit (2009-01-05 19:08:00)

    ok, at least Jack is doing better now. Don't know why, I just play around with limits.conf, /etc/pam.d/su and deleted the content of /dev/shm directory.
    Now the settings are the same as before, but  I'm getting far less xruns and luckily without these disturbing plopps.
    Last edited by redbit (2009-01-07 15:52:36)

  • Thinkpad T61 kernel panics

    I'm having some trouble with random kernel panics on a thinkpad T61. Sometimes they occur just after boot yet other times I can be using my laptop for hours with absolutely no problems before it decides to panic. I've attached a picture of the error message I get and the output of some commands I thought would be relevant.
    My /etc/rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    LOCALE="en_GB.utf8"
    HARDWARECLOCK="localtime"
    USEDIRECTISA="no"
    TIMEZONE="Europe/London"
    KEYMAP="uk"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    MOD_AUTOLOAD="yes"
    MODULES=(e1000e snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
    USELVM="no"
    # NETWORKING
    # Should also be put in /etc/hosts
    HOSTNAME="alasdair-laptop"
    NETWORKS=(ethernet gp)
    # DAEMONS
    DAEMONS=(syslog-ng acpid @net-profiles netfs crond @alsa)
    Here's my dmesg, taken just after booting.
    Linux version 2.6.25-ARCH (root@workstation64) (gcc version 4.3.1 20080626 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 14 15:25:51 UTC 2008
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
    BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007deb0000 (usable)
    BIOS-e820: 000000007deb0000 - 000000007decc000 (ACPI data)
    BIOS-e820: 000000007decc000 - 000000007df00000 (ACPI NVS)
    BIOS-e820: 000000007df00000 - 000000007e000000 (reserved)
    BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    1118MB HIGHMEM available.
    896MB LOWMEM available.
    Scan SMP from c0000000 for 1024 bytes.
    Scan SMP from c009fc00 for 1024 bytes.
    Scan SMP from c00f0000 for 65536 bytes.
    found SMP MP-table at [c00f6900] 000f6900
    Entering add_active_range(0, 0, 515760) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 229376
    HighMem 229376 -> 515760
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 515760
    On node 0 totalpages: 515760
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 1760 pages used for memmap
    Normal zone: 223520 pages, LIFO batch:31
    HighMem zone: 2237 pages used for memmap
    HighMem zone: 284147 pages, LIFO batch:31
    Movable zone: 0 pages used for memmap
    DMI present.
    ACPI: RSDP 000F68D0, 0024 (r2 LENOVO)
    ACPI: XSDT 7DEBB77F, 0094 (r1 LENOVO TP-7L 2170 LTP 0)
    ACPI: FACP 7DEBB900, 00F4 (r3 LENOVO TP-7L 2170 LNVO 1)
    ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
    ACPI: DSDT 7DEBBD1D, FED1 (r1 LENOVO TP-7L 2170 MSFT 3000000)
    ACPI: FACS 7DEE4000, 0040
    ACPI: SSDT 7DEBBAB4, 0269 (r1 LENOVO TP-7L 2170 MSFT 3000000)
    ACPI: ECDT 7DECBBEE, 0052 (r1 LENOVO TP-7L 2170 LNVO 1)
    ACPI: TCPA 7DECBC40, 0032 (r2 LENOVO TP-7L 2170 LNVO 1)
    ACPI: APIC 7DECBC72, 0068 (r1 LENOVO TP-7L 2170 LNVO 1)
    ACPI: MCFG 7DECBCDA, 003C (r1 LENOVO TP-7L 2170 LNVO 1)
    ACPI: HPET 7DECBD16, 0038 (r1 LENOVO TP-7L 2170 LNVO 1)
    ACPI: SLIC 7DECBDF0, 0176 (r1 LENOVO TP-7L 2170 LTP 0)
    ACPI: BOOT 7DECBF66, 0028 (r1 LENOVO TP-7L 2170 LTP 1)
    ACPI: ASF! 7DECBF8E, 0072 (r16 LENOVO TP-7L 2170 PTL 1)
    ACPI: SSDT 7DEE26D9, 025F (r1 LENOVO TP-7L 2170 INTL 20050513)
    ACPI: SSDT 7DEE2938, 00A6 (r1 LENOVO TP-7L 2170 INTL 20050513)
    ACPI: SSDT 7DEE29DE, 04F7 (r1 LENOVO TP-7L 2170 INTL 20050513)
    ACPI: SSDT 7DEE2ED5, 01D8 (r1 LENOVO TP-7L 2170 INTL 20050513)
    ACPI: DMI detected: Lenovo ThinkPad T61
    ACPI: Added _OSI(Linux)
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 7:7 APIC version 20
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Processor #1 7:7 APIC version 20
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000)
    PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511731
    Kernel command line: root=/dev/disk/by-uuid/bf262041-d9e8-494d-becc-808ef613eef2 ro
    mapped APIC to ffffb000 (fee00000)
    mapped IOAPIC to ffffa000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Detected 2094.737 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 2040240k/2063040k available (2083k kernel code, 21556k reserved, 711k data, 268k init, 1145536k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    .init : 0xc03c1000 - 0xc0404000 ( 268 kB)
    .data : 0xc0308fe8 - 0xc03baea0 ( 711 kB)
    .text : 0xc0100000 - 0xc0308fe8 (2083 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
    hpet clockevent registered
    Calibrating delay using timer specific routine.. 4197.54 BogoMIPS (lpj=6992869)
    Security Framework initialized
    Capability LSM initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 3072K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    using mwait in idle threads.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20070126
    ACPI: Checking initramfs for custom DSDT
    CPU0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06
    Booting processor 1/1 ip 4000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 4191.12 BogoMIPS (lpj=6982598)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 3072K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06
    Total of 2 processors activated (8388.66 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    checking TSC synchronization [CPU#0 -> CPU#1]:
    Measured 1229046 cycles TSC warp between CPUs, turning off TSC clock.
    Marking TSC unstable due to: check_tsc_sync_source failed.
    Brought up 2 CPUs
    net_namespace: 548 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: Using MMCONFIG for extended config space
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: EC: EC description table is found, configuring boot EC
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: BIOS _OSI(Linux) query honored via DMI
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in poll mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Power Resource [PUBS] (on)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 11 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    Switched to high resolution mode on CPU 0
    Switched to high resolution mode on CPU 1
    system 00:00: iomem range 0x0-0x9ffff could not be reserved
    system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
    system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
    system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
    system 00:00: iomem range 0xcc000-0xcffff could not be reserved
    system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
    system 00:00: iomem range 0x0-0x0 could not be reserved
    system 00:00: iomem range 0x0-0x0 could not be reserved
    system 00:00: iomem range 0x0-0x0 could not be reserved
    system 00:00: iomem range 0xe0000-0xe3fff has been reserved
    system 00:00: iomem range 0xe4000-0xe7fff has been reserved
    system 00:00: iomem range 0xe8000-0xebfff has been reserved
    system 00:00: iomem range 0xec000-0xeffff has been reserved
    system 00:00: iomem range 0xf0000-0xfffff could not be reserved
    system 00:00: iomem range 0x100000-0x7dffffff could not be reserved
    system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
    system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
    system 00:02: ioport range 0x164e-0x164f has been reserved
    system 00:02: ioport range 0x1000-0x107f has been reserved
    system 00:02: ioport range 0x1180-0x11bf has been reserved
    system 00:02: ioport range 0x800-0x80f has been reserved
    system 00:02: ioport range 0x15e0-0x15ef has been reserved
    system 00:02: ioport range 0x1600-0x165f could not be reserved
    system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
    system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
    system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
    system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
    system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
    system 00:02: iomem range 0xfed45000-0xfed4bfff could not be reserved
    PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0
    PCI: Bridge: 0000:00:01.0
    IO window: 2000-2fff
    MEM window: 0xd4000000-0xd6ffffff
    PREFETCH window: 0x00000000e0000000-0x00000000efffffff
    PCI: Bridge: 0000:00:1c.0
    IO window: 3000-3fff
    MEM window: 0xfc000000-0xfdffffff
    PREFETCH window: 0x00000000f8000000-0x00000000f80fffff
    PCI: Bridge: 0000:00:1c.1
    IO window: 4000-4fff
    MEM window: 0xdc100000-0xdf2fffff
    PREFETCH window: 0x00000000dfd00000-0x00000000dfdfffff
    PCI: Bridge: 0000:00:1c.2
    IO window: 5000-5fff
    MEM window: 0xd8000000-0xd9ffffff
    PREFETCH window: 0x00000000dfa00000-0x00000000dfafffff
    PCI: Bridge: 0000:00:1c.3
    IO window: 6000-6fff
    MEM window: 0xd0000000-0xd1ffffff
    PREFETCH window: 0x00000000df700000-0x00000000df7fffff
    PCI: Bridge: 0000:00:1c.4
    IO window: 7000-7fff
    MEM window: 0xcc000000-0xcdffffff
    PREFETCH window: 0x00000000df400000-0x00000000df4fffff
    PCI: Bus 22, cardbus bridge: 0000:15:00.0
    IO window: 0x00008000-0x000080ff
    IO window: 0x00008400-0x000084ff
    PREFETCH window: 0xf4000000-0xf7ffffff
    MEM window: 0x80000000-0x83ffffff
    PCI: Bridge: 0000:00:1e.0
    IO window: 8000-bfff
    MEM window: 0xf8100000-0xfbffffff
    PREFETCH window: 0x00000000f4000000-0x00000000f7ffffff
    ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 21 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1c.3 to 64
    ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 20 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:1c.4 to 64
    PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:15:00.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    Unpacking initramfs... done
    Freeing initrd memory: 554k freed
    Simple Boot Flag at 0x35 set to 0x1
    apm: BIOS not found.
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:01:00.0: Boot video device
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:01.0:pcie00]
    Allocate Port Service[0000:00:01.0:pcie02]
    Allocate Port Service[0000:00:01.0:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0:pcie00]
    Allocate Port Service[0000:00:1c.0:pcie02]
    Allocate Port Service[0000:00:1c.0:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.1:pcie00]
    Allocate Port Service[0000:00:1c.1:pcie02]
    Allocate Port Service[0000:00:1c.1:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.2:pcie00]
    Allocate Port Service[0000:00:1c.2:pcie02]
    Allocate Port Service[0000:00:1c.2:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.3 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.3:pcie00]
    Allocate Port Service[0000:00:1c.3:pcie02]
    Allocate Port Service[0000:00:1c.3:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.4 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.4:pcie00]
    Allocate Port Service[0000:00:1c.4:pcie02]
    Allocate Port Service[0000:00:1c.4:pcie03]
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard as /class/input/input1
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 268k freed
    ACPI: ACPI Dock Station Driver
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1f.1 to 64
    ACPI: PCI interrupt for device 0000:00:1f.1 disabled
    ahci 0000:00:1f.2: version 3.0
    ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 16 (level, low) -> IRQ 16
    ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 16
    ata2: DUMMY
    ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 16
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-7: WDC WD1600BEVS-08RST2, 08.01G08, max UDMA/133
    ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/133
    ata3: SATA link down (SStatus 0 SControl 300)
    scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 08.0 PQ: 0 ANSI: 5
    ata_piix 0000:00:1f.1: version 2.12
    ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1f.1 to 64
    scsi3 : ata_piix
    scsi4 : ata_piix
    ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
    ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
    ata4.00: ATAPI: Optiarc DVD RW AD-7910A, 1.D1, max UDMA/33
    ata4.00: configured for UDMA/33
    ata5: port disabled. ignoring.
    scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7910A 1.D1 PQ: 0 ANSI: 5
    Driver 'sr' needs updating - please use bus_type methods
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 3:0:0:0: Attached scsi CD-ROM sr0
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    EXT3-fs: INFO: recovery required on readonly filesystem.
    EXT3-fs: write access will be enabled during recovery.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: recovery complete.
    EXT3-fs: mounted filesystem with ordered data mode.
    rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
    e1000e: Copyright (c) 1999-2007 Intel Corporation.
    ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:19.0 to 64
    eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:37:d6:46:39
    eth0: Intel(R) PRO/1000 Network Connection
    eth0: MAC: 4, PHY: 6, PBA No: 1008ff-0ff
    ACPI: PCI Interrupt 0000:00:1b.0[b] -> GSI 17 (level, low) -> IRQ 17
    hda_intel: probe_mask set to 0x1 for device 17aa:20ac
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    ACPI: AC Adapter [AC] (off-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input2
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input3
    ACPI: Lid Switch [LID]
    input: Sleep Button (CM) as /class/input/input4
    ACPI: Sleep Button (CM) [SLPB]
    ACPI: SSDT 7DEE1B32, 02C4 (r1 PmRef Cpu0Ist 100 INTL 20050513)
    ACPI: SSDT 7DEE1E7B, 085E (r1 PmRef Cpu0Cst 100 INTL 20050513)
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:00 is registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: SSDT 7DEE1A6A, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513)
    ACPI: SSDT 7DEE1DF6, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513)
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:01 is registered as cooling_device1
    ACPI: Processor [CPU1] (supports 8 throttling states)
    ACPI: LNXTHERM:01 is registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (52 C)
    ACPI: LNXTHERM:02 is registered as thermal_zone1
    ACPI: Thermal Zone [THM1] (42 C)
    Non-volatile memory driver v1.2
    thinkpad_acpi: ThinkPad ACPI Extras v0.19
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 7LETB7WW (2.17 ), EC 7KHT24WW-1.08
    thinkpad_acpi: Lenovo ThinkPad T61
    thinkpad_acpi: radio switch found; radios are enabled
    thinkpad_acpi: standard ACPI backlight interface available, not loading native one...
    input: ThinkPad Extra Buttons as /class/input/input5
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 3:0:0:0: Attached scsi generic sg1 type 5
    Linux agpgart interface v0.103
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:1a.0 to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:1a.1 to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: WMI: Mapper loaded
    ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    usb 1-2: new full speed USB device using uhci_hcd and address 2
    ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay
    ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler
    ACPI: Error installing bay notify handler
    ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    ACPI: device:03 is registered as cooling_device2
    input: Video Bus as /class/input/input6
    usb 1-2: configuration #1 chosen from 1 choice
    ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:1a.7 to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
    PCI: cache line size of 32 is not supported by device 0000:00:1a.7
    ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    ACPI: device:08 is registered as cooling_device3
    input: Video Bus as /class/input/input7
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 4 ports detected
    ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
    ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
    iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23k
    iwl4965: Copyright(c) 2003-2007 Intel Corporation
    usb 3-1: new full speed USB device using uhci_hcd and address 2
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 6 ports detected
    hub 3-0:1.0: unable to enumerate USB device on port 1
    ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:03:00.0 to 64
    iwl4965: Detected Intel Wireless WiFi Link 4965AGN
    iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
    phy0: Selected rate control algorithm 'iwl-4965-rs'
    hub 6-0:1.0: unable to enumerate USB device on port 2
    usb 1-2: USB disconnect, address 2
    input: PC Speaker as /class/input/input8
    usb 1-2: new full speed USB device using uhci_hcd and address 3
    usb 1-2: configuration #1 chosen from 1 choice
    ACPI: PCI interrupt for device 0000:03:00.0 disabled
    ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23
    ACPI: PCI Interrupt 0000:15:00.1[b] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:15:00.1 to 64
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8101000-f81017ff] Max Packet=[2048] IR/IT contexts=[4/4]
    Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6]
    usb 7-1: new high speed USB device using ehci_hcd and address 2
    Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff
    cs: IO port probe 0x8000-0xbfff: clean.
    pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff
    pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
    Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000
    serio: Synaptics pass-through port at isa0060/serio1/input0
    input: SynPS/2 Synaptics TouchPad as /class/input/input9
    usb 7-1: configuration #1 chosen from 1 choice
    Initializing USB Mass Storage driver...
    scsi5 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    Monitor-Mwait will be used to enter C-3 state
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032a26dd3a]
    EXT3 FS on sda3, internal journal
    Adding 891596k swap on /dev/sda4. Priority:-1 extents:1 across:891596k
    Clocksource tsc unstable (delta = -297926941 ns)
    ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
    PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 40100102, writing 40100106)
    scsi 5:0:0:0: Direct-Access S31B0806 USB DISK 1100 PQ: 0 ANSI: 0 CCS
    sd 5:0:0:0: [sdb] 2030592 512-byte hardware sectors (1040 MB)
    sd 5:0:0:0: [sdb] Write Protect is off
    sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
    sd 5:0:0:0: [sdb] Assuming drive cache: write through
    sd 5:0:0:0: [sdb] 2030592 512-byte hardware sectors (1040 MB)
    sd 5:0:0:0: [sdb] Write Protect is off
    sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
    sd 5:0:0:0: [sdb] Assuming drive cache: write through
    sdb: sdb1
    sd 5:0:0:0: [sdb] Attached SCSI removable disk
    sd 5:0:0:0: Attached scsi generic sg2 type 0
    usb-storage: device scan complete
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /class/input/input10
    wlan0: Initial auth_alg=0
    wlan0: authenticate with AP 00:1f:5b:88:6f:1f
    wlan0: authenticate with AP 00:1f:5b:88:6f:1f
    wlan0: RX authentication from 00:1f:5b:88:6f:1f (alg=0 transaction=2 status=0)
    wlan0: authenticated
    wlan0: associate with AP 00:1f:5b:88:6f:1f
    wlan0: RX AssocResp from 00:1f:5b:88:6f:1f (capab=0x431 status=0 aid=1)
    wlan0: associated
    wlan0: switched to short barker preamble (BSSID=00:1f:5b:88:6f:1f)
    wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
    wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
    wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
    wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
    padlock: VIA PadLock not detected.
    FAT: invalid media value (0xb9)
    VFS: Can't find a valid FAT filesystem on dev sdb.
    usb 7-1: USB disconnect, address 2
    usb 7-2: new high speed USB device using ehci_hcd and address 3
    usb 7-2: configuration #1 chosen from 1 choice
    scsi6 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 3
    usb-storage: waiting for device to settle before scanning
    scsi 6:0:0:0: Direct-Access S31B0806 USB DISK 1100 PQ: 0 ANSI: 0 CCS
    sd 6:0:0:0: [sdb] 2030592 512-byte hardware sectors (1040 MB)
    sd 6:0:0:0: [sdb] Write Protect is off
    sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
    sd 6:0:0:0: [sdb] Assuming drive cache: write through
    sd 6:0:0:0: [sdb] 2030592 512-byte hardware sectors (1040 MB)
    sd 6:0:0:0: [sdb] Write Protect is off
    sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
    sd 6:0:0:0: [sdb] Assuming drive cache: write through
    sdb: sdb1
    sd 6:0:0:0: [sdb] Attached SCSI removable disk
    sd 6:0:0:0: Attached scsi generic sg2 type 0
    usb-storage: device scan complete
    lsmod
    Module Size Used by
    nls_cp437 5888 1
    vfat 10880 1
    fat 45984 1 vfat
    aes_i586 8064 1
    aes_generic 27432 1 aes_i586
    usb_storage 84800 1
    joydev 10048 0
    pcmcia 33068 0
    firewire_ohci 16512 0
    firewire_core 36928 1 firewire_ohci
    crc_itu_t 2304 1 firewire_core
    arc4 2176 2
    ecb 3072 2
    ohci1394 28720 0
    serio_raw 5508 0
    yenta_socket 23436 1
    rsrc_nonstatic 11264 1 yenta_socket
    ieee1394 79288 1 ohci1394
    pcmcia_core 33300 3 pcmcia,yenta_socket,rsrc_nonstatic
    pcspkr 2816 0
    psmouse 36752 0
    i2c_i801 9232 0
    i2c_core 19348 1 i2c_i801
    iwl4965 101748 0
    mac80211 130572 1 iwl4965
    cfg80211 16392 1 mac80211
    video 16656 0
    output 3200 1 video
    ehci_hcd 33932 0
    bay 4736 0
    wmi 6056 0
    uhci_hcd 22288 0
    usbcore 129904 4 usb_storage,ehci_hcd,uhci_hcd
    intel_agp 23740 0
    agpgart 28244 1 intel_agp
    sg 27188 0
    thinkpad_acpi 53624 0
    nvram 7436 1 thinkpad_acpi
    thermal 15260 0
    processor 32096 3 thermal
    evdev 9472 0
    fan 4356 0
    button 6416 0
    battery 10372 0
    ac 4484 0
    snd_seq_oss 30336 0
    snd_seq_midi_event 6656 1 snd_seq_oss
    snd_seq 48560 4 snd_seq_oss,snd_seq_midi_event
    snd_seq_device 6796 2 snd_seq_oss,snd_seq
    snd_hda_intel 336440 0
    snd_hwdep 7428 1 snd_hda_intel
    snd_pcm_oss 38656 0
    snd_pcm 68228 2 snd_hda_intel,snd_pcm_oss
    snd_timer 19848 2 snd_seq,snd_pcm
    snd_page_alloc 8072 2 snd_hda_intel,snd_pcm
    snd_mixer_oss 14848 1 snd_pcm_oss
    snd 46628 9 snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
    soundcore 6496 1 snd
    e1000e 90916 0
    rtc_cmos 9120 0
    rtc_core 15516 1 rtc_cmos
    rtc_lib 2944 1 rtc_core
    ext3 124040 1
    jbd 44052 1 ext3
    mbcache 7172 1 ext3
    sd_mod 23320 5
    sr_mod 15300 0
    cdrom 34080 1 sr_mod
    ata_piix 17668 0
    ahci 25224 2
    ata_generic 5636 0
    pata_acpi 4992 0
    libata 142224 4 ata_piix,ahci,ata_generic,pata_acpi
    scsi_mod 92332 5 usb_storage,sg,sd_mod,sr_mod,libata
    dock 7952 2 bay,libata
    lspci
    00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
    00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
    00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03)
    00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
    00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
    00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
    00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
    00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
    00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
    00:1f.0 ISA bridge: Intel Corporation 82801HBM (ICH8M-E) LPC Interface Controller (rev 03)
    00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
    01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 140M (rev a1)
    03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
    15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
    15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)

    Sorry to ressurect an old thread, but recently I've been getting random kernel panics on my t61 as well. I believe the root cause is the wireless card. I have an intel 4965 card just like you.

  • T400 realtek wifi fails after short use, given IOMMU errors in dmesg

    Hello, thanks for reading.
    The title explains the problem pretty well.  I can connect to any given network just fine through wicd, but after a short bit of use the networking entirely stops and if I try to make any changes I get what I assume is a kernel panic and the whole system stops responding, short of the caps lock blinking.
    Relevant outputs include:
    dmesg:
    Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Oct 23 10:03:24 CEST 2009
    Command line: root=/dev/disk/by-uuid/746ab7a4-69f4-450c-bfe0-3a9f9cdd7a09 ro vga=791
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    Centaur CentaurHauls
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
    BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable)
    BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
    BIOS-e820: 00000000bf8a7000 - 00000000bf9b7000 (usable)
    BIOS-e820: 00000000bf9b7000 - 00000000bfa0f000 (reserved)
    BIOS-e820: 00000000bfa0f000 - 00000000bfac6000 (usable)
    BIOS-e820: 00000000bfac6000 - 00000000bfad1000 (ACPI NVS)
    BIOS-e820: 00000000bfad1000 - 00000000bfad4000 (ACPI data)
    BIOS-e820: 00000000bfad4000 - 00000000bfad8000 (reserved)
    BIOS-e820: 00000000bfad8000 - 00000000bfadc000 (ACPI NVS)
    BIOS-e820: 00000000bfadc000 - 00000000bfadf000 (reserved)
    BIOS-e820: 00000000bfadf000 - 00000000bfb06000 (ACPI NVS)
    BIOS-e820: 00000000bfb06000 - 00000000bfb08000 (ACPI data)
    BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved)
    BIOS-e820: 00000000bfd0f000 - 00000000bfd9f000 (ACPI NVS)
    BIOS-e820: 00000000bfd9f000 - 00000000bfdff000 (ACPI data)
    BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable)
    BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
    BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
    BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 000000023c000000 (usable)
    DMI present.
    last_pfn = 0x23c000 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-D3FFF write-protect
    D4000-DBFFF uncachable
    DC000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 23C000000 mask FFC000000 uncachable
    1 base 000000000 mask F80000000 write-back
    2 base 080000000 mask FC0000000 write-back
    3 base 100000000 mask F00000000 write-back
    4 base 200000000 mask FC0000000 write-back
    5 disabled
    6 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
    last_pfn = 0xbfe00 max_arch_pfn = 0x400000000
    e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000001000 (usable)
    modified: 0000000000001000 - 0000000000006000 (reserved)
    modified: 0000000000006000 - 000000000009ec00 (usable)
    modified: 000000000009ec00 - 00000000000a0000 (reserved)
    modified: 00000000000dc000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 00000000bf8a1000 (usable)
    modified: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
    modified: 00000000bf8a7000 - 00000000bf9b7000 (usable)
    modified: 00000000bf9b7000 - 00000000bfa0f000 (reserved)
    modified: 00000000bfa0f000 - 00000000bfac6000 (usable)
    modified: 00000000bfac6000 - 00000000bfad1000 (ACPI NVS)
    modified: 00000000bfad1000 - 00000000bfad4000 (ACPI data)
    modified: 00000000bfad4000 - 00000000bfad8000 (reserved)
    modified: 00000000bfad8000 - 00000000bfadc000 (ACPI NVS)
    modified: 00000000bfadc000 - 00000000bfadf000 (reserved)
    modified: 00000000bfadf000 - 00000000bfb06000 (ACPI NVS)
    modified: 00000000bfb06000 - 00000000bfb08000 (ACPI data)
    modified: 00000000bfb08000 - 00000000bfd0f000 (reserved)
    modified: 00000000bfd0f000 - 00000000bfd9f000 (ACPI NVS)
    modified: 00000000bfd9f000 - 00000000bfdff000 (ACPI data)
    modified: 00000000bfdff000 - 00000000bfe00000 (usable)
    modified: 00000000bfe00000 - 00000000c0000000 (reserved)
    modified: 00000000e0000000 - 00000000f0000000 (reserved)
    modified: 00000000fec00000 - 00000000fec10000 (reserved)
    modified: 00000000fed00000 - 00000000fed00400 (reserved)
    modified: 00000000fed10000 - 00000000fed14000 (reserved)
    modified: 00000000fed18000 - 00000000fed1a000 (reserved)
    modified: 00000000fed1c000 - 00000000fed90000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000ff800000 - 0000000100000000 (reserved)
    modified: 0000000100000000 - 000000023c000000 (usable)
    initial memory mapped : 0 - 20000000
    init_memory_mapping: 0000000000000000-00000000bfe00000
    0000000000 - 00bfe00000 page 2M
    kernel direct mapping tables up to bfe00000 @ 8000-c000
    init_memory_mapping: 0000000100000000-000000023c000000
    0100000000 - 023c000000 page 2M
    kernel direct mapping tables up to 23c000000 @ a000-14000
    RAMDISK: 37f36000 - 37fef4e4
    ACPI: RSDP 00000000000f64e0 00024 (v02 LENOVO)
    ACPI: XSDT 00000000bfd6a273 0009C (v01 LENOVO TP-7U 00002160 LTP 00000000)
    ACPI: FACP 00000000bfd6a400 000F4 (v03 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: DSDT 00000000bfd6a7db 0F3FB (v01 LENOVO TP-7U 00002160 MSFT 03000000)
    ACPI: FACS 00000000bfd8e000 00040
    ACPI: SSDT 00000000bfd6a5b4 00227 (v01 LENOVO TP-7U 00002160 MSFT 03000000)
    ACPI: ECDT 00000000bfd79bd6 00052 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: APIC 00000000bfd79c28 00078 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: MCFG 00000000bfd79ca0 0003C (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: HPET 00000000bfd79cdc 00038 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: SLIC 00000000bfd79dc2 00176 (v01 LENOVO TP-7U 00002160 LTP 00000000)
    ACPI: BOOT 00000000bfd79f38 00028 (v01 LENOVO TP-7U 00002160 LTP 00000001)
    ACPI: ASF! 00000000bfd79f60 000A0 (v16 LENOVO TP-7U 00002160 PTL 00000001)
    ACPI: SSDT 00000000bfd8d213 0054F (v01 LENOVO TP-7U 00002160 INTL 20050513)
    ACPI: TCPA 00000000bfb07000 00032 (v00 00000000 00000000)
    ACPI: DMAR 00000000bfb06000 000D8 (v01 00000001 00000000)
    ACPI: SSDT 00000000bfad3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624)
    ACPI: Local APIC address 0xfee00000
    (8 early reservations) ==> bootmem [0000000000 - 023c000000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
    #2 [0001000000 - 00016837d0] TEXT DATA BSS ==> [0001000000 - 00016837d0]
    #3 [0037f36000 - 0037fef4e4] RAMDISK ==> [0037f36000 - 0037fef4e4]
    #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
    #5 [0001684000 - 000168414c] BRK ==> [0001684000 - 000168414c]
    #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
    #7 [000000a000 - 000000f000] PGTABLE ==> [000000a000 - 000000f000]
    found SMP MP-table at [ffff8800000f6520] f6520
    [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-ffff88002f5fffff] on node 0
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x0023c000
    Movable zone start PFN for each node
    early_node_map[7] active PFN ranges
    0: 0x00000000 -> 0x00000001
    0: 0x00000006 -> 0x0000009e
    0: 0x00000100 -> 0x000bf8a1
    0: 0x000bf8a7 -> 0x000bf9b7
    0: 0x000bfa0f -> 0x000bfac6
    0: 0x000bfdff -> 0x000bfe00
    0: 0x00100000 -> 0x0023c000
    On node 0 totalpages: 2079234
    DMA zone: 56 pages used for memmap
    DMA zone: 107 pages reserved
    DMA zone: 3830 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 766625 pages, LIFO batch:31
    Normal zone: 17696 pages used for memmap
    Normal zone: 1276640 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    SMP: Allowing 4 CPUs, 2 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 0000000000001000 - 0000000000006000
    PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    PM: Registered nosave memory: 00000000bf8a1000 - 00000000bf8a7000
    PM: Registered nosave memory: 00000000bf9b7000 - 00000000bfa0f000
    PM: Registered nosave memory: 00000000bfac6000 - 00000000bfad1000
    PM: Registered nosave memory: 00000000bfad1000 - 00000000bfad4000
    PM: Registered nosave memory: 00000000bfad4000 - 00000000bfad8000
    PM: Registered nosave memory: 00000000bfad8000 - 00000000bfadc000
    PM: Registered nosave memory: 00000000bfadc000 - 00000000bfadf000
    PM: Registered nosave memory: 00000000bfadf000 - 00000000bfb06000
    PM: Registered nosave memory: 00000000bfb06000 - 00000000bfb08000
    PM: Registered nosave memory: 00000000bfb08000 - 00000000bfd0f000
    PM: Registered nosave memory: 00000000bfd0f000 - 00000000bfd9f000
    PM: Registered nosave memory: 00000000bfd9f000 - 00000000bfdff000
    PM: Registered nosave memory: 00000000bfe00000 - 00000000c0000000
    PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
    PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
    PM: Registered nosave memory: 00000000fed00000 - 00000000fed10000
    PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
    PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
    PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
    PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
    PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
    PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
    PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
    Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
    NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
    PERCPU: Embedded 28 pages at ffff880028035000, static data 82400 bytes
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2047095
    Kernel command line: root=/dev/disk/by-uuid/746ab7a4-69f4-450c-bfe0-3a9f9cdd7a09 ro vga=791
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Initializing CPU#0
    xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
    software IO TLB at phys 0x20000000 - 0x24000000
    Memory: 8114824k/9371648k available (3628k kernel code, 1054712k absent, 201116k reserved, 1500k data, 484k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    NR_IRQS:768
    Extended CMOS year: 2000
    Fast TSC calibration using PIT
    Detected 2527.220 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    hpet clockevent registered
    HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.04 BogoMIPS (lpj=8424066)
    Security Framework initialized
    Mount-cache hash table entries: 256
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 3072K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    Performance Counters: Core2 events, Intel PMU driver.
    ... version: 2
    ... bit width: 40
    ... generic counters: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose counters: 3
    ... counter mask: 0000000700000003
    ACPI: Core revision 20090521
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
    Booting processor 1 APIC 0x1 ip 0x6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 5055.55 BogoMIPS (lpj=8423280)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 3072K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    mce: CPU supports 6 MCE banks
    CPU1: Thermal monitoring enabled (TM2)
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    Total of 2 processors activated (10112.59 BogoMIPS).
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
    PCI: MCFG area at e0000000 reserved in E820
    PCI: Using MMCONFIG at e0000000 - e3ffffff
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: EC description table is found, configuring boot EC
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: Power Resource [PUBS] (on)
    ACPI: ACPI Dock Station Driver: 3 docks/bays found
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:03.0: reg 10 64bit mmio: [0xfc226800-0xfc22680f]
    pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:03.0: PME# disabled
    pci 0000:00:19.0: reg 10 32bit mmio: [0xfc200000-0xfc21ffff]
    pci 0000:00:19.0: reg 14 32bit mmio: [0xfc225000-0xfc225fff]
    pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
    pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:19.0: PME# disabled
    pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
    pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
    pci 0000:00:1a.2: reg 20 io port: [0x18a0-0x18bf]
    pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc226c00-0xfc226fff]
    pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1a.7: PME# disabled
    pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc220000-0xfc223fff]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.3: PME# disabled
    pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.4: PME# disabled
    pci 0000:00:1d.0: reg 20 io port: [0x18c0-0x18df]
    pci 0000:00:1d.1: reg 20 io port: [0x18e0-0x18ff]
    pci 0000:00:1d.2: reg 20 io port: [0x1c00-0x1c1f]
    pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc227000-0xfc2273ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.2: reg 10 io port: [0x1c40-0x1c47]
    pci 0000:00:1f.2: reg 14 io port: [0x1834-0x1837]
    pci 0000:00:1f.2: reg 18 io port: [0x1838-0x183f]
    pci 0000:00:1f.2: reg 1c io port: [0x1830-0x1833]
    pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
    pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc226000-0xfc2267ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 10 64bit mmio: [0xfc227400-0xfc2274ff]
    pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
    pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
    pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
    pci 0000:01:00.0: reg 18 32bit mmio: [0xcfff0000-0xcfffffff]
    pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
    pci 0000:01:00.0: supports D1 D2
    pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
    pci 0000:00:01.0: bridge 32bit mmio: [0xcff00000-0xcfffffff]
    pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
    pci 0000:03:00.0: reg 10 io port: [0x3000-0x30ff]
    pci 0000:03:00.0: reg 14 32bit mmio: [0xf4200000-0xf4203fff]
    pci 0000:03:00.0: supports D1 D2
    pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
    pci 0000:03:00.0: PME# disabled
    pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
    pci 0000:00:1c.1: bridge 32bit mmio: [0xf4200000-0xf42fffff]
    pci 0000:00:1c.3: bridge io port: [0x4000-0x4fff]
    pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
    pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf4000000-0xf40fffff]
    pci 0000:00:1c.4: bridge io port: [0x5000-0x5fff]
    pci 0000:00:1c.4: bridge 32bit mmio: [0xfa000000-0xfbffffff]
    pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf4100000-0xf41fffff]
    pci 0000:15:00.0: reg 10 32bit mmio: [0xf4300000-0xf4300fff]
    pci 0000:15:00.0: supports D1 D2
    pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.0: PME# disabled
    pci 0000:15:00.1: reg 10 32bit mmio: [0xf4301000-0xf43017ff]
    pci 0000:15:00.1: supports D1 D2
    pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.1: PME# disabled
    pci 0000:15:00.2: reg 10 32bit mmio: [0xf4301800-0xf43018ff]
    pci 0000:15:00.2: supports D1 D2
    pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.2: PME# disabled
    pci 0000:15:00.3: reg 10 32bit mmio: [0xf4301c00-0xf4301cff]
    pci 0000:15:00.3: supports D1 D2
    pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.3: PME# disabled
    pci 0000:15:00.4: reg 10 32bit mmio: [0xf4302000-0xf43020ff]
    pci 0000:15:00.4: supports D1 D2
    pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.4: PME# disabled
    pci 0000:15:00.5: reg 10 32bit mmio: [0xf4302400-0xf43024ff]
    pci 0000:15:00.5: supports D1 D2
    pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.5: PME# disabled
    pci 0000:00:1e.0: transparent bridge
    pci 0000:00:1e.0: bridge io port: [0x6000-0x9fff]
    pci 0000:00:1e.0: bridge 32bit mmio: [0xf4300000-0xf7ffffff]
    pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf0000000-0xf3ffffff]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:00: iomem range 0x0-0x9ffff could not be reserved
    system 00:00: iomem range 0xc0000-0xc3fff has been reserved
    system 00:00: iomem range 0xc4000-0xc7fff has been reserved
    system 00:00: iomem range 0xc8000-0xcbfff has been reserved
    system 00:00: iomem range 0xcc000-0xcffff has been reserved
    system 00:00: iomem range 0xd0000-0xd3fff has been reserved
    system 00:00: iomem range 0xdc000-0xdffff could not be reserved
    system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
    system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
    system 00:00: iomem range 0xe8000-0xebfff could not be reserved
    system 00:00: iomem range 0xec000-0xeffff could not be reserved
    system 00:00: iomem range 0xf0000-0xfffff could not be reserved
    system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
    system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
    system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x107f has been reserved
    system 00:02: ioport range 0x1180-0x11ff has been reserved
    system 00:02: ioport range 0x800-0x80f has been reserved
    system 00:02: ioport range 0x15e0-0x15ef has been reserved
    system 00:02: ioport range 0x1600-0x167f has been reserved
    system 00:02: ioport range 0x1680-0x169f has been reserved
    system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
    system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
    system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved
    system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
    system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
    system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x2000-0x2fff
    pci 0000:00:01.0: MEM window: 0xcff00000-0xcfffffff
    pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
    pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:1c.0: IO window: disabled
    pci 0000:00:1c.0: MEM window: disabled
    pci 0000:00:1c.0: PREFETCH window: disabled
    pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
    pci 0000:00:1c.1: IO window: 0x3000-0x3fff
    pci 0000:00:1c.1: MEM window: 0xf4200000-0xf42fffff
    pci 0000:00:1c.1: PREFETCH window: disabled
    pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
    pci 0000:00:1c.3: IO window: 0x4000-0x4fff
    pci 0000:00:1c.3: MEM window: 0xf8000000-0xf9ffffff
    pci 0000:00:1c.3: PREFETCH window: 0x000000f4000000-0x000000f40fffff
    pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
    pci 0000:00:1c.4: IO window: 0x5000-0x5fff
    pci 0000:00:1c.4: MEM window: 0xfa000000-0xfbffffff
    pci 0000:00:1c.4: PREFETCH window: 0x000000f4100000-0x000000f41fffff
    pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
    pci 0000:15:00.0: IO window: 0x006000-0x0060ff
    pci 0000:15:00.0: IO window: 0x006400-0x0064ff
    pci 0000:15:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
    pci 0000:15:00.0: MEM window: 0xc0000000-0xc3ffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
    pci 0000:00:1e.0: IO window: 0x6000-0x9fff
    pci 0000:00:1e.0: MEM window: 0xf4300000-0xf7ffffff
    pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f3ffffff
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    pci 0000:00:1c.3: setting latency timer to 64
    pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    pci 0000:00:1c.4: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
    pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
    pci_bus 0000:01: resource 1 mem: [0xcff00000-0xcfffffff]
    pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
    pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
    pci_bus 0000:03: resource 1 mem: [0xf4200000-0xf42fffff]
    pci_bus 0000:05: resource 0 io: [0x4000-0x4fff]
    pci_bus 0000:05: resource 1 mem: [0xf8000000-0xf9ffffff]
    pci_bus 0000:05: resource 2 pref mem [0xf4000000-0xf40fffff]
    pci_bus 0000:0d: resource 0 io: [0x5000-0x5fff]
    pci_bus 0000:0d: resource 1 mem: [0xfa000000-0xfbffffff]
    pci_bus 0000:0d: resource 2 pref mem [0xf4100000-0xf41fffff]
    pci_bus 0000:15: resource 0 io: [0x6000-0x9fff]
    pci_bus 0000:15: resource 1 mem: [0xf4300000-0xf7ffffff]
    pci_bus 0000:15: resource 2 pref mem [0xf0000000-0xf3ffffff]
    pci_bus 0000:15: resource 3 io: [0x00-0xffff]
    pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff]
    pci_bus 0000:16: resource 0 io: [0x6000-0x60ff]
    pci_bus 0000:16: resource 1 io: [0x6400-0x64ff]
    pci_bus 0000:16: resource 2 pref mem [0xf0000000-0xf3ffffff]
    pci_bus 0000:16: resource 3 mem: [0xc0000000-0xc3ffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs...
    Freeing initrd memory: 741k freed
    Simple Boot Flag at 0x35 set to 0x1
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1257200918.329:1): initialized
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 15852
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:01:00.0: Boot video device
    pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
    pcieport-driver 0000:00:01.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
    pcieport-driver 0000:00:1c.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
    pcieport-driver 0000:00:1c.1: setting latency timer to 64
    pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
    pcieport-driver 0000:00:1c.3: setting latency timer to 64
    pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X
    pcieport-driver 0000:00:1c.4: setting latency timer to 64
    vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004100000, using 3072k, total 16384k
    vesafb: mode is 1024x768x16, linelength=2048, pages=9
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 484k freed
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
    ahci: SSS flag set, parallel bus scan disabled
    ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    Switched to high resolution mode on CPU 0
    ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 29
    Switched to high resolution mode on CPU 1
    ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180 irq 29
    ata3: DUMMY
    ata4: DUMMY
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
    ata1.00: ATA-7: SAMSUNG MMCQE28G8MUP-0VA, VAM08L1Q, max UDMA/100
    ata1.00: 250069680 sectors, multi 16: LBA48
    ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
    ata1.00: configured for UDMA/100
    ata1.00: configured for UDMA/100
    ata1: EH complete
    scsi 0:0:0:0: Direct-Access ATA SAMSUNG MMCQE28G VAM0 PQ: 0 ANSI: 5
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.00: ACPI cmd e3/00:79:00:00:00:a0 succeeded
    ata2.00: ACPI cmd e3/00:01:00:00:00:a0 succeeded
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX12, max UDMA/133
    ata2.00: ACPI cmd e3/00:79:00:00:00:a0 succeeded
    ata2.00: ACPI cmd e3/00:01:00:00:00:a0 succeeded
    ata2.00: configured for UDMA/133
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX12 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    EXT4-fs (sda3): INFO: recovery required on readonly filesystem
    EXT4-fs (sda3): write access will be enabled during recovery
    EXT4-fs (sda3): barriers enabled
    EXT4-fs (sda3): delayed allocation enabled
    EXT4-fs: file extents enabled
    kjournald2 starting: pid 596, dev sda3:8, commit interval 5 seconds
    EXT4-fs: mballoc enabled
    EXT4-fs (sda3): orphan cleanup on readonly fs
    EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 30918
    EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 30917
    EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 30916
    EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 30915
    EXT4-fs (sda3): 4 orphan inodes deleted
    EXT4-fs (sda3): recovery complete
    EXT4-fs (sda3): mounted filesystem with ordered data mode
    rtc_cmos 00:07: RTC can wake from S4
    rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    udev: starting version 146
    input: PC Speaker as /devices/platform/pcspkr/input/input2
    ACPI: SSDT 00000000bfad6c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    iTCO_vendor_support: vendor-support=0
    Monitor-Mwait will be used to enter C-1 state
    i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Monitor-Mwait will be used to enter C-2 state
    [drm] Initialized drm 1.1.0 20060810
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor LNXCPU:00: registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: SSDT 00000000bfad5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Non-volatile memory driver v1.3
    ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
    ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1a.7: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.7: debug port 1
    ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00
    ACPI: AC Adapter [AC] (off-line)
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    processor LNXCPU:01: registered as cooling_device1
    ACPI: Processor [CPU1] (supports 8 throttling states)
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    ACPI: Power Button [PWRF]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    ACPI: Lid Switch [LID]
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
    ACPI: Sleep Button [SLPB]
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
    ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    ieee80211_crypt: registered algorithm 'NULL'
    ieee80211_crypt: registered algorithm 'TKIP'
    ieee80211_crypt: registered algorithm 'CCMP'
    ieee80211_crypt: registered algorithm 'WEP'
    Linux kernel driver for RTL8192 based WLAN cards
    Copyright (c) 2007-2008, Realsil Wlan
    ricoh-mmc: Ricoh MMC Controller disabling driver
    ricoh-mmc: Copyright(c) Philip Langdale
    ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11)
    rtl819xSE 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    rtl819xSE 0000:03:00.0: setting latency timer to 64
    ricoh-mmc: Controller is now disabled.
    ===============>NIC 8192SE
    uhci_hcd: USB Universal Host Controller Interface driver
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    Dot11d_Init()
    IRQ 17
    ACPI: WMI: Mapper loaded
    ACPI: Battery Slot [BAT0] (battery present)
    acpi device:0a: registered as cooling_device2
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:08/device:09/input/input6
    ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
    uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
    uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    uhci_hcd 0000:00:1a.0: setting latency timer to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1a.1: setting latency timer to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (33 C)
    thermal LNXTHERM:02: registered as thermal_zone1
    ACPI: Thermal Zone [THM1] (42 C)
    thinkpad_acpi: ThinkPad ACPI Extras v0.23
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 7UET66WW (2.16 ), EC 7VHT12WW-1.01
    thinkpad_acpi: Lenovo ThinkPad T400, model 2764CTO
    uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
    uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    uhci_hcd 0000:00:1a.2: setting latency timer to 64
    uhci_hcd 0000:00:1a.2: UHCI Host Controller
    uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    thinkpad_acpi: radio switch found; radios are disabled
    thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
    thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
    uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
    usb usb8: configuration #1 chosen from 1 choice
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 2 ports detected
    Registered led device: tpacpi::thinklight
    Registered led device: tpacpi::power
    Registered led device: tpacpi::standby
    Registered led device: tpacpi::thinkvantage
    thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
    input: ThinkPad Extra Buttons as /devices/virtual/input/input7
    [drm] radeon default to kernel modesetting.
    [drm] radeon kernel modesetting enabled.
    radeon 0000:01:00.0: power state changed by ACPI to D0
    radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    radeon 0000:01:00.0: setting latency timer to 64
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    [drm] radeon: Initializing kernel modesetting.
    [drm:radeon_driver_load_kms] *ERROR* Failed to initialize radeon, disabling IOCTL
    radeon 0000:01:00.0: PCI INT A disabled
    radeon: probe of 0000:01:00.0 failed with error -22
    ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    heci: module is from the staging directory, the quality is unknown, you have been warned.
    heci: Intel(R) Management Engine Interface - version 5.0.0.31
    heci: Copyright (c) 2003 - 2008 Intel Corporation.
    heci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    heci 0000:00:03.0: setting latency timer to 64
    heci: link layer has been established.
    e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
    e1000e: Copyright (c) 1999-2008 Intel Corporation.
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4301000-f43017ff] Max Packet=[2048] IR/IT contexts=[4/4]
    yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
    heci driver initialization successful.
    e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
    e1000e 0000:00:19.0: setting latency timer to 64
    e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
    yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
    yenta_cardbus 0000:15:00.0: Socket status: 30000006
    yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x9fff
    yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4300000 - 0xf7ffffff
    yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf3ffffff
    sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
    sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
    Registered led device: mmc0::
    mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
    usb 1-6: new high speed USB device using ehci_hcd and address 2
    0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:7e:6f:cf:41
    0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
    0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008ff-0ff
    HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    usb 1-6: configuration #1 chosen from 1 choice
    input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:1004)
    input: Integrated Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input12
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    Clocksource tsc unstable (delta = -76024863 ns)
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input13
    EXT4-fs (sda3): internal journal on sda3:8
    EXT4-fs (sda4): barriers enabled
    kjournald2 starting: pid 1210, dev sda4:8, commit interval 5 seconds
    EXT4-fs (sda4): internal journal on sda4:8
    EXT4-fs (sda4): delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs (sda4): mounted filesystem with ordered data mode
    Adding 265064k swap on /dev/sda2. Priority:-1 extents:1 across:265064k SS
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032a43e1e7]
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    gen_RefreshLedState first init
    =================> NIC version : C-cut
    rtl819xSE 0000:03:00.0: firmware: requesting RTL8192SE/rtl8192sfw.bin
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x8, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    ===>ieee80211_start_scan_rsl()
    ADDRCONF(NETDEV_UP): wlan0: link is not ready
    GPIOChangeRF - HW Radio OFF
    =========>NicIFDisableNIC()
    PHY_SetRtl8192seRfHalt save BB/RF
    Save max pwr
    CPU0 attaching NULL sched-domain.
    CPU1 attaching NULL sched-domain.
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    domain 1: span 0-1 level CPU
    groups: 0-1 (__cpu_power = 2048)
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    domain 1: span 0-1 level CPU
    groups: 0-1 (__cpu_power = 2048)
    e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
    e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
    0000:00:19.0: eth0: 10/100 speed: disabling TSO
    ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    ================>r8192_wx_set_scan(): hwradio off
    ================>r8192_wx_set_scan(): hwradio off
    ================>r8192_wx_set_scan(): hwradio off
    eth0: no IPv6 routers present
    fuse init (API version 7.12)
    ================>r8192_wx_set_scan(): hwradio off
    ================>r8192_wx_set_scan(): hwradio off
    GPIOChangeRF - HW Radio ON, RF ON
    ===========>NicIFEnableNIC()
    gen_RefreshLedState first init
    =================> NIC version : C-cut
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    ====================>haha:IPSEnter()
    =========>NicIFDisableNIC()
    PHY_SetRtl8192seRfHalt save BB/RF
    =========>r8192_wx_set_scan(): IPSLeave
    ===========>NicIFEnableNIC()
    gen_RefreshLedState first init
    =================> NIC version : C-cut
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    ====================>haha:IPSEnter()
    =========>NicIFDisableNIC()
    PHY_SetRtl8192seRfHalt save BB/RF
    e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
    e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    rtl819xSE:==========>rtl8192_down()
    ===========>NicIFEnableNIC()
    gen_RefreshLedState first init
    =================> NIC version : C-cut
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    Save max pwr
    rtl819xSE:<==========rtl8192_down()
    gen_RefreshLedState first init
    =================> NIC version : C-cut
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    ===>ieee80211_start_scan_rsl()
    ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Linking with Wireless Network,channel:1, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    Linking with Wireless Network,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    Association response status code 0xc
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    Association response status code 0xc
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    Association response status code 0xc
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    Association response status code 0xc
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    Association response status code 0xc
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    Linking with Wireless Network,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
    Linking with Wireless Network,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    #################ieee80211_sta_send_associnfo(), assocreq_ies_len:65,assocresp_ies_len:53
    ===>u4bAcParam:a425, ===>u4bAcParam:a449, ===>u4bAcParam:5e431c, ===>u4bAcParam:2f321c,
    Associated successfully
    ============>normal associate
    ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    Using G rates:108
    Successfully associated, ht not enabled(0, 0)
    ===========rtl8192se_update_ratr_table: ff5
    ===>set to B/G mode
    EAPOL TranslateHeader(), pTcb->DataRate = 0x2
    EAPOL TranslateHeader(), pTcb->DataRate = 0x2
    alg name:TKIP
    rtl819xSE:EnableHWSecurityConfig8192:, hwsec:1, pairwise_key:2, SECR_value:c
    rtl819xSE:====>to setKey(), dev:ffff880238230000, EntryNo:4, KeyIndex:0, KeyType:2, MacAddr00:1c:10:cf:29:72
    rtl819xSE:=========>after set key, usconfig:8008
    alg name:TKIP
    rtl819xSE:====>to setKey(), dev:ffff880238230000, EntryNo:1, KeyIndex:1, KeyType:2, MacAddrff:ff:ff:ff:ff:ff
    rtl819xSE:=========>after set key, usconfig:8009
    ===>DHCP Protocol start tx DHCP pkt src port:68, dest port:67!!
    e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
    0000:00:19.0: eth0: 10/100 speed: disabling TSO
    ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    ========>dm_check_edca_turbo():iot peer is unknown, bssid:00:1c:10:cf:29:72
    wlan0: no IPv6 routers present
    eth0: no IPv6 routers present
    e1000e: eth0 NIC Link is Down
    DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:03:00.0
    eth0 Link encap:Ethernet HWaddr 00:24:7E:6F:CF:41
    inet6 addr: fe80::224:7eff:fe6f:cf41/64 Scope:Link
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:4 errors:0 dropped:0 overruns:0 frame:0
    TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:100
    RX bytes:240 (240.0 b) TX bytes:936 (936.0 b)
    Memory:fc200000-fc220000
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:16 errors:0 dropped:0 overruns:0 frame:0
    TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:2160 (2.1 Kb) TX bytes:2160 (2.1 Kb)
    wlan0 Link encap:Ethernet HWaddr 00:26:5E:EA:64:78
    inet addr:192.168.1.104 Bcast:192.168.1.255 Mask:255.255.255.0
    inet6 addr: fe80::226:5eff:feea:6478/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    Interrupt:17 Memory:ffffc90000068000-ffffc90000068100
    00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
    00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
    00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
    00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
    00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
    00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
    00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
    00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
    00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
    00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
    01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3400 Series
    03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10)
    15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
    15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
    15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
    15:00.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev ff)
    15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11)
    15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11)
    This line:
    DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:03:00.0
    I get a whole bunch of times after it first appears in dmesg.  I've googled this error without the address on the end and it seems there isn't much of a solution that I'm aware of.  I don't know what to do from here!  Guidance is so very appreciated.

    Same here, I've tried without wicd.  The problem reproduces exactly the same.
    Also, I've googled around and it seems like this is a recurring bug. 
    I tried passing iommu=force to the kernal during boot and from there, the card works slowly.  I also get a different error array in DMESG from there.  The end of it is as follows:
    Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009
    Command line: root=/dev/disk/by-uuid/b86db434-e877-45bf-bc56-65187c632662 ro vga=791 iommu=force
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    Centaur CentaurHauls
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
    BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable)
    BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
    BIOS-e820: 00000000bf8a7000 - 00000000bf9b7000 (usable)
    BIOS-e820: 00000000bf9b7000 - 00000000bfa0f000 (reserved)
    BIOS-e820: 00000000bfa0f000 - 00000000bfac6000 (usable)
    BIOS-e820: 00000000bfac6000 - 00000000bfad1000 (ACPI NVS)
    BIOS-e820: 00000000bfad1000 - 00000000bfad4000 (ACPI data)
    BIOS-e820: 00000000bfad4000 - 00000000bfad8000 (reserved)
    BIOS-e820: 00000000bfad8000 - 00000000bfadc000 (ACPI NVS)
    BIOS-e820: 00000000bfadc000 - 00000000bfadf000 (reserved)
    BIOS-e820: 00000000bfadf000 - 00000000bfb06000 (ACPI NVS)
    BIOS-e820: 00000000bfb06000 - 00000000bfb08000 (ACPI data)
    BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved)
    BIOS-e820: 00000000bfd0f000 - 00000000bfd9f000 (ACPI NVS)
    BIOS-e820: 00000000bfd9f000 - 00000000bfdff000 (ACPI data)
    BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable)
    BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
    BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
    BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 000000023c000000 (usable)
    DMI present.
    last_pfn = 0x23c000 max_arch_pfn = 0x100000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-D3FFF write-protect
    D4000-DBFFF uncachable
    DC000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 23C000000 mask FFC000000 uncachable
    1 base 000000000 mask F80000000 write-back
    2 base 080000000 mask FC0000000 write-back
    3 base 100000000 mask F00000000 write-back
    4 base 200000000 mask FC0000000 write-back
    5 disabled
    6 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
    last_pfn = 0xbfe00 max_arch_pfn = 0x100000000
    e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000001000 (usable)
    modified: 0000000000001000 - 0000000000006000 (reserved)
    modified: 0000000000006000 - 000000000009ec00 (usable)
    modified: 000000000009ec00 - 00000000000a0000 (reserved)
    modified: 00000000000dc000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 00000000bf8a1000 (usable)
    modified: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
    modified: 00000000bf8a7000 - 00000000bf9b7000 (usable)
    modified: 00000000bf9b7000 - 00000000bfa0f000 (reserved)
    modified: 00000000bfa0f000 - 00000000bfac6000 (usable)
    modified: 00000000bfac6000 - 00000000bfad1000 (ACPI NVS)
    modified: 00000000bfad1000 - 00000000bfad4000 (ACPI data)
    modified: 00000000bfad4000 - 00000000bfad8000 (reserved)
    modified: 00000000bfad8000 - 00000000bfadc000 (ACPI NVS)
    modified: 00000000bfadc000 - 00000000bfadf000 (reserved)
    modified: 00000000bfadf000 - 00000000bfb06000 (ACPI NVS)
    modified: 00000000bfb06000 - 00000000bfb08000 (ACPI data)
    modified: 00000000bfb08000 - 00000000bfd0f000 (reserved)
    modified: 00000000bfd0f000 - 00000000bfd9f000 (ACPI NVS)
    modified: 00000000bfd9f000 - 00000000bfdff000 (ACPI data)
    modified: 00000000bfdff000 - 00000000bfe00000 (usable)
    modified: 00000000bfe00000 - 00000000c0000000 (reserved)
    modified: 00000000e0000000 - 00000000f0000000 (reserved)
    modified: 00000000fec00000 - 00000000fec10000 (reserved)
    modified: 00000000fed00000 - 00000000fed00400 (reserved)
    modified: 00000000fed10000 - 00000000fed14000 (reserved)
    modified: 00000000fed18000 - 00000000fed1a000 (reserved)
    modified: 00000000fed1c000 - 00000000fed90000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000ff800000 - 0000000100000000 (reserved)
    modified: 0000000100000000 - 000000023c000000 (usable)
    init_memory_mapping: 0000000000000000-00000000bfe00000
    0000000000 - 00bfe00000 page 2M
    kernel direct mapping tables up to bfe00000 @ 8000-c000
    init_memory_mapping: 0000000100000000-000000023c000000
    0100000000 - 023c000000 page 2M
    kernel direct mapping tables up to 23c000000 @ a000-14000
    RAMDISK: 37f4a000 - 37fef0b7
    ACPI: RSDP 00000000000f64e0 00024 (v02 LENOVO)
    ACPI: XSDT 00000000bfd6a273 0009C (v01 LENOVO TP-7U 00002160 LTP 00000000)
    ACPI: FACP 00000000bfd6a400 000F4 (v03 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: DSDT 00000000bfd6a7db 0F3FB (v01 LENOVO TP-7U 00002160 MSFT 03000000)
    ACPI: FACS 00000000bfd8e000 00040
    ACPI: SSDT 00000000bfd6a5b4 00227 (v01 LENOVO TP-7U 00002160 MSFT 03000000)
    ACPI: ECDT 00000000bfd79bd6 00052 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: APIC 00000000bfd79c28 00078 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: MCFG 00000000bfd79ca0 0003C (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: HPET 00000000bfd79cdc 00038 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: SLIC 00000000bfd79dc2 00176 (v01 LENOVO TP-7U 00002160 LTP 00000000)
    ACPI: BOOT 00000000bfd79f38 00028 (v01 LENOVO TP-7U 00002160 LTP 00000001)
    ACPI: ASF! 00000000bfd79f60 000A0 (v16 LENOVO TP-7U 00002160 PTL 00000001)
    ACPI: SSDT 00000000bfd8d213 0054F (v01 LENOVO TP-7U 00002160 INTL 20050513)
    ACPI: TCPA 00000000bfb07000 00032 (v00 00000000 00000000)
    ACPI: DMAR 00000000bfb06000 000D8 (v01 00000001 00000000)
    ACPI: SSDT 00000000bfad3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624)
    ACPI: Local APIC address 0xfee00000
    (8 early reservations) ==> bootmem [0000000000 - 023c000000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
    #2 [0000200000 - 000082d0d0] TEXT DATA BSS ==> [0000200000 - 000082d0d0]
    #3 [0037f4a000 - 0037fef0b7] RAMDISK ==> [0037f4a000 - 0037fef0b7]
    #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
    #5 [000082e000 - 000082e14c] BRK ==> [000082e000 - 000082e14c]
    #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
    #7 [000000a000 - 000000f000] PGTABLE ==> [000000a000 - 000000f000]
    found SMP MP-table at [ffff8800000f6520] f6520
    [ffffe20000000000-ffffe20007dfffff] PMD -> [ffff880028200000-ffff88002fffffff] on node 0
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x0023c000
    Movable zone start PFN for each node
    early_node_map[7] active PFN ranges
    0: 0x00000000 -> 0x00000001
    0: 0x00000006 -> 0x0000009e
    0: 0x00000100 -> 0x000bf8a1
    0: 0x000bf8a7 -> 0x000bf9b7
    0: 0x000bfa0f -> 0x000bfac6
    0: 0x000bfdff -> 0x000bfe00
    0: 0x00100000 -> 0x0023c000
    On node 0 totalpages: 2079234
    DMA zone: 56 pages used for memmap
    DMA zone: 1688 pages reserved
    DMA zone: 2249 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 766625 pages, LIFO batch:31
    Normal zone: 17696 pages used for memmap
    Normal zone: 1276640 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    SMP: Allowing 4 CPUs, 2 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 0000000000001000 - 0000000000006000
    PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    PM: Registered nosave memory: 00000000bf8a1000 - 00000000bf8a7000
    PM: Registered nosave memory: 00000000bf9b7000 - 00000000bfa0f000
    PM: Registered nosave memory: 00000000bfac6000 - 00000000bfad1000
    PM: Registered nosave memory: 00000000bfad1000 - 00000000bfad4000
    PM: Registered nosave memory: 00000000bfad4000 - 00000000bfad8000
    PM: Registered nosave memory: 00000000bfad8000 - 00000000bfadc000
    PM: Registered nosave memory: 00000000bfadc000 - 00000000bfadf000
    PM: Registered nosave memory: 00000000bfadf000 - 00000000bfb06000
    PM: Registered nosave memory: 00000000bfb06000 - 00000000bfb08000
    PM: Registered nosave memory: 00000000bfb08000 - 00000000bfd0f000
    PM: Registered nosave memory: 00000000bfd0f000 - 00000000bfd9f000
    PM: Registered nosave memory: 00000000bfd9f000 - 00000000bfdff000
    PM: Registered nosave memory: 00000000bfe00000 - 00000000c0000000
    PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
    PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
    PM: Registered nosave memory: 00000000fed00000 - 00000000fed10000
    PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
    PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
    PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
    PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
    PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
    PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
    PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
    Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
    NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
    PERCPU: Embedded 25 pages at ffff880028035000, static data 72352 bytes
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2045514
    Kernel command line: root=/dev/disk/by-uuid/b86db434-e877-45bf-bc56-65187c632662 ro vga=791 iommu=force
    Initializing CPU#0
    xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    NR_IRQS:768
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    Extended CMOS year: 2000
    Fast TSC calibration using PIT
    Detected 2526.745 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
    software IO TLB at phys 0x20000000 - 0x24000000
    Memory: 8100960k/9371648k available (3409k kernel code, 1054712k absent, 214984k reserved, 1239k data, 464k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    hpet clockevent registered
    HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    Calibrating delay loop (skipped), value calculated using timer frequency.. 5055.05 BogoMIPS (lpj=8422483)
    Security Framework initialized
    Mount-cache hash table entries: 256
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 3072K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    ACPI: Core revision 20090320
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
    Booting processor 1 APIC 0x1 ip 0x6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 5056.56 BogoMIPS (lpj=8423300)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 3072K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU1: Thermal monitoring enabled (TM2)
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    Total of 2 processors activated (10111.61 BogoMIPS).
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    net_namespace: 1888 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
    PCI: MCFG area at e0000000 reserved in E820
    PCI: Using MMCONFIG at e0000000 - e3ffffff
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: EC description table is found, configuring boot EC
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: Power Resource [PUBS] (on)
    ACPI: ACPI Dock Station Driver: 3 docks/bays found
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:03.0: reg 10 64bit mmio: [0xfc226800-0xfc22680f]
    pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:03.0: PME# disabled
    pci 0000:00:19.0: reg 10 32bit mmio: [0xfc200000-0xfc21ffff]
    pci 0000:00:19.0: reg 14 32bit mmio: [0xfc225000-0xfc225fff]
    pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
    pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:19.0: PME# disabled
    pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
    pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
    pci 0000:00:1a.2: reg 20 io port: [0x18a0-0x18bf]
    pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc226c00-0xfc226fff]
    pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1a.7: PME# disabled
    pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc220000-0xfc223fff]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.3: PME# disabled
    pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.4: PME# disabled
    pci 0000:00:1d.0: reg 20 io port: [0x18c0-0x18df]
    pci 0000:00:1d.1: reg 20 io port: [0x18e0-0x18ff]
    pci 0000:00:1d.2: reg 20 io port: [0x1c00-0x1c1f]
    pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc227000-0xfc2273ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.2: reg 10 io port: [0x1c40-0x1c47]
    pci 0000:00:1f.2: reg 14 io port: [0x1834-0x1837]
    pci 0000:00:1f.2: reg 18 io port: [0x1838-0x183f]
    pci 0000:00:1f.2: reg 1c io port: [0x1830-0x1833]
    pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
    pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc226000-0xfc2267ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 10 64bit mmio: [0xfc227400-0xfc2274ff]
    pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
    pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
    pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
    pci 0000:01:00.0: reg 18 32bit mmio: [0xcfff0000-0xcfffffff]
    pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
    pci 0000:01:00.0: supports D1 D2
    pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
    pci 0000:00:01.0: bridge 32bit mmio: [0xcff00000-0xcfffffff]
    pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
    pci 0000:03:00.0: reg 10 io port: [0x3000-0x30ff]
    pci 0000:03:00.0: reg 14 32bit mmio: [0xf4200000-0xf4203fff]
    pci 0000:03:00.0: supports D1 D2
    pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
    pci 0000:03:00.0: PME# disabled
    pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
    pci 0000:00:1c.1: bridge 32bit mmio: [0xf4200000-0xf42fffff]
    pci 0000:00:1c.3: bridge io port: [0x4000-0x4fff]
    pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
    pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf4000000-0xf40fffff]
    pci 0000:00:1c.4: bridge io port: [0x5000-0x5fff]
    pci 0000:00:1c.4: bridge 32bit mmio: [0xfa000000-0xfbffffff]
    pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf4100000-0xf41fffff]
    pci 0000:15:00.0: reg 10 32bit mmio: [0xf4300000-0xf4300fff]
    pci 0000:15:00.0: supports D1 D2
    pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.0: PME# disabled
    pci 0000:15:00.1: reg 10 32bit mmio: [0xf4301000-0xf43017ff]
    pci 0000:15:00.1: supports D1 D2
    pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.1: PME# disabled
    pci 0000:15:00.2: reg 10 32bit mmio: [0xf4301800-0xf43018ff]
    pci 0000:15:00.2: supports D1 D2
    pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.2: PME# disabled
    pci 0000:15:00.3: reg 10 32bit mmio: [0xf4301c00-0xf4301cff]
    pci 0000:15:00.3: supports D1 D2
    pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.3: PME# disabled
    pci 0000:15:00.4: reg 10 32bit mmio: [0xf4302000-0xf43020ff]
    pci 0000:15:00.4: supports D1 D2
    pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.4: PME# disabled
    pci 0000:15:00.5: reg 10 32bit mmio: [0xf4302400-0xf43024ff]
    pci 0000:15:00.5: supports D1 D2
    pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.5: PME# disabled
    pci 0000:00:1e.0: transparent bridge
    pci 0000:00:1e.0: bridge io port: [0x6000-0x9fff]
    pci 0000:00:1e.0: bridge 32bit mmio: [0xf4300000-0xf7ffffff]
    pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf0000000-0xf3ffffff]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:00: iomem range 0x0-0x9ffff could not be reserved
    system 00:00: iomem range 0xc0000-0xc3fff has been reserved
    system 00:00: iomem range 0xc4000-0xc7fff has been reserved
    system 00:00: iomem range 0xc8000-0xcbfff has been reserved
    system 00:00: iomem range 0xcc000-0xcffff has been reserved
    system 00:00: iomem range 0xd0000-0xd3fff has been reserved
    system 00:00: iomem range 0xdc000-0xdffff could not be reserved
    system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
    system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
    system 00:00: iomem range 0xe8000-0xebfff could not be reserved
    system 00:00: iomem range 0xec000-0xeffff could not be reserved
    system 00:00: iomem range 0xf0000-0xfffff could not be reserved
    system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
    system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
    system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x107f has been reserved
    system 00:02: ioport range 0x1180-0x11ff has been reserved
    system 00:02: ioport range 0x800-0x80f has been reserved
    system 00:02: ioport range 0x15e0-0x15ef has been reserved
    system 00:02: ioport range 0x1600-0x167f has been reserved
    system 00:02: ioport range 0x1680-0x169f has been reserved
    system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
    system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
    system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved
    system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
    system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
    system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x2000-0x2fff
    pci 0000:00:01.0: MEM window: 0xcff00000-0xcfffffff
    pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
    pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:1c.0: IO window: disabled
    pci 0000:00:1c.0: MEM window: disabled
    pci 0000:00:1c.0: PREFETCH window: disabled
    pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
    pci 0000:00:1c.1: IO window: 0x3000-0x3fff
    pci 0000:00:1c.1: MEM window: 0xf4200000-0xf42fffff
    pci 0000:00:1c.1: PREFETCH window: disabled
    pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
    pci 0000:00:1c.3: IO window: 0x4000-0x4fff
    pci 0000:00:1c.3: MEM window: 0xf8000000-0xf9ffffff
    pci 0000:00:1c.3: PREFETCH window: 0x000000f4000000-0x000000f40fffff
    pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
    pci 0000:00:1c.4: IO window: 0x5000-0x5fff
    pci 0000:00:1c.4: MEM window: 0xfa000000-0xfbffffff
    pci 0000:00:1c.4: PREFETCH window: 0x000000f4100000-0x000000f41fffff
    pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
    pci 0000:15:00.0: IO window: 0x006000-0x0060ff
    pci 0000:15:00.0: IO window: 0x006400-0x0064ff
    pci 0000:15:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
    pci 0000:15:00.0: MEM window: 0xc4000000-0xc7ffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
    pci 0000:00:1e.0: IO window: 0x6000-0x9fff
    pci 0000:00:1e.0: MEM window: 0xf4300000-0xf7ffffff
    pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f3ffffff
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    pci 0000:00:1c.3: setting latency timer to 64
    pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    pci 0000:00:1c.4: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
    pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
    pci_bus 0000:01: resource 1 mem: [0xcff00000-0xcfffffff]
    pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
    pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
    pci_bus 0000:03: resource 1 mem: [0xf4200000-0xf42fffff]
    pci_bus 0000:05: resource 0 io: [0x4000-0x4fff]
    pci_bus 0000:05: resource 1 mem: [0xf8000000-0xf9ffffff]
    pci_bus 0000:05: resource 2 pref mem [0xf4000000-0xf40fffff]
    pci_bus 0000:0d: resource 0 io: [0x5000-0x5fff]
    pci_bus 0000:0d: resource 1 mem: [0xfa000000-0xfbffffff]
    pci_bus 0000:0d: resource 2 pref mem [0xf4100000-0xf41fffff]
    pci_bus 0000:15: resource 0 io: [0x6000-0x9fff]
    pci_bus 0000:15: resource 1 mem: [0xf4300000-0xf7ffffff]
    pci_bus 0000:15: resource 2 pref mem [0xf0000000-0xf3ffffff]
    pci_bus 0000:15: resource 3 io: [0x00-0xffff]
    pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff]
    pci_bus 0000:16: resource 0 io: [0x6000-0x60ff]
    pci_bus 0000:16: resource 1 io: [0x6400-0x64ff]
    pci_bus 0000:16: resource 2 pref mem [0xf0000000-0xf3ffffff]
    pci_bus 0000:16: resource 3 mem: [0xc4000000-0xc7ffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs...
    Freeing initrd memory: 660k freed
    Simple Boot Flag at 0x35 set to 0x1
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1257365076.373:1): initialized
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 15825
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:01:00.0: Boot video device
    pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
    pcieport-driver 0000:00:01.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
    pcieport-driver 0000:00:1c.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
    pcieport-driver 0000:00:1c.1: setting latency timer to 64
    pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
    pcieport-driver 0000:00:1c.3: setting latency timer to 64
    pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X
    pcieport-driver 0000:00:1c.4: setting latency timer to 64
    vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20004100000, using 3072k, total 16384k
    vesafb: mode is 1024x768x16, linelength=2048, pages=9
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 464k freed
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    SCSI subsystem initialized
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 0
    libata version 3.00 loaded.
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
    ahci: SSS flag set, parallel bus scan disabled
    ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 29
    ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180 irq 29
    ata3: DUMMY
    ata4: DUMMY
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
    ata1.00: ATA-7: SAMSUNG MMCQE28G8MUP-0VA, VAM08L1Q, max UDMA/100
    ata1.00: 250069680 sectors, multi 16: LBA48
    ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
    ata1.00: configured for UDMA/100
    ata1.00: configured for UDMA/100
    ata1: EH complete
    scsi 0:0:0:0: Direct-Access ATA SAMSUNG MMCQE28G VAM0 PQ: 0 ANSI: 5
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.00: ACPI cmd e3/00:79:00:00:00:a0 succeeded
    ata2.00: ACPI cmd e3/00:01:00:00:00:a0 succeeded
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX12, max UDMA/133
    ata2.00: ACPI cmd e3/00:79:00:00:00:a0 succeeded
    ata2.00: ACPI cmd e3/00:01:00:00:00:a0 succeeded
    ata2.00: configured for UDMA/133
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX12 PQ: 0 ANSI: 5
    Driver 'sd' needs updating - please use bus_type methods
    Driver 'sr' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 250069680 512-byte hardware sectors: (128 GB/119 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    EXT4-fs: barriers enabled
    EXT4-fs: delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs: mounted filesystem sda6 with ordered data mode
    kjournald2 starting: pid 601, dev sda6:8, commit interval 5 seconds
    rtc_cmos 00:07: RTC can wake from S4
    rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    udev: starting version 141
    heci: module is from the staging directory, the quality is unknown, you have been warned.
    heci: Intel(R) Management Engine Interface - version 5.0.0.31
    heci: Copyright (c) 2003 - 2008 Intel Corporation.
    heci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    heci 0000:00:03.0: setting latency timer to 64
    heci: link layer has been established.
    ACPI: SSDT 00000000bfad6c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
    ACPI: AC Adapter [AC] (off-line)
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI_CPU:00: registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    ACPI: Power Button [PWRF]
    ACPI: SSDT 00000000bfad5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
    ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    ACPI: Lid Switch [LID]
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
    ACPI: Sleep Button [SLPB]
    e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
    e1000e: Copyright (c) 1999-2008 Intel Corporation.
    input: PC Speaker as /devices/platform/pcspkr/input/input5
    iTCO_vendor_support: vendor-support=0
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    ACPI: WMI: Mapper loaded
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    heci driver initialization successful.
    e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    e1000e 0000:00:19.0: setting latency timer to 64
    e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI_CPU:01: registered as cooling_device1
    ACPI: Processor [CPU1] (supports 8 throttling states)
    0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:7e:6f:cf:41
    0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
    0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008ff-0ff
    ACPI: Battery Slot [BAT0] (battery present)
    ieee80211_crypt: registered algorithm 'NULL'
    ieee80211_crypt: registered algorithm 'TKIP'
    ieee80211_crypt: registered algorithm 'CCMP'
    ieee80211_crypt: registered algorithm 'WEP'
    Linux kernel driver for RTL8192 based WLAN cards
    Copyright (c) 2007-2008, Realsil Wlan
    rtl819xSE 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    rtl819xSE 0000:03:00.0: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
    ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1a.7: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (46 C)
    thermal LNXTHERM:02: registered as thermal_zone1
    ACPI: Thermal Zone [THM1] (50 C)
    ehci_hcd 0000:00:1a.7: debug port 1
    ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00
    ===============>NIC 8192SE
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    acpi device:0a: registered as cooling_device2
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:08/device:09/input/input6
    ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
    Monitor-Mwait will be used to enter C-3 state
    ricoh-mmc: Ricoh MMC Controller disabling driver
    ricoh-mmc: Copyright(c) Philip Langdale
    ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11)
    ricoh-mmc: Controller is now disabled.
    Dot11d_Init()
    IRQ 17<6>Non-volatile memory driver v1.3
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    thinkpad_acpi: ThinkPad ACPI Extras v0.23
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 7UET66WW (2.16 ), EC 7VHT12WW-1.01
    thinkpad_acpi: Lenovo ThinkPad T400, model 2764CTO
    thinkpad_acpi: radio switch found; radios are enabled
    thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
    thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
    Registered led device: tpacpi::thinklight
    Registered led device: tpacpi::power
    Registered led device: tpacpi::standby
    thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
    input: ThinkPad Extra Buttons as /devices/virtual/input/input7
    input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/input/input8
    input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input9
    input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input10
    input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/input/input11
    ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
    ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
    yenta_cardbus 0000:15:00.0: Socket status: 30000006
    yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x9fff
    yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4300000 - 0xf7ffffff
    yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf3ffffff
    ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
    uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    uhci_hcd 0000:00:1a.0: setting latency timer to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1a.1: setting latency timer to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
    uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    uhci_hcd 0000:00:1a.2: setting latency timer to 64
    uhci_hcd 0000:00:1a.2: UHCI Host Controller
    uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
    usb usb8: configuration #1 chosen from 1 choice
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 2 ports detected
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4301000-f43017ff] Max Packet=[2048] IR/IT contexts=[4/4]
    sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
    sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
    Registered led device: mmc0::
    mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
    usb 1-1: new high speed USB device using ehci_hcd and address 2
    usb 1-1: configuration #1 chosen from 1 choice
    Initializing USB Mass Storage driver...
    scsi4 : SCSI emulation for USB Mass Storage devices
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    usb 1-6: new high speed USB device using ehci_hcd and address 3
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input12
    Clocksource tsc unstable (delta = -250245903 ns)
    usb 1-6: configuration #1 chosen from 1 choice
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:1004)
    input: Integrated Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input13
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    EXT4 FS on sda6, internal journal on sda6:8
    EXT4-fs: barriers enabled
    kjournald2 starting: pid 1750, dev sda2:8, commit interval 5 seconds
    EXT4 FS on sda2, internal journal on sda2:8
    EXT4-fs: delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs: mounted filesystem sda2 with ordered data mode
    EXT4-fs: barriers enabled
    kjournald2 starting: pid 1751, dev sda7:8, commit interval 5 seconds
    EXT4 FS on sda7, internal journal on sda7:8
    EXT4-fs: delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs: mounted filesystem sda7 with ordered data mode
    Adding 498920k swap on /dev/sda5. Priority:-1 extents:1 across:498920k SS
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032a43e1e7]
    scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
    sd 4:0:0:0: Attached scsi generic sg2 type 0
    usb-storage: device scan complete
    sd 4:0:0:0: [sdb] 15753216 512-byte hardware sectors: (8.06 GB/7.51 GiB)
    sd 4:0:0:0: [sdb] Write Protect is off
    sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
    sd 4:0:0:0: [sdb] Assuming drive cache: write through
    sd 4:0:0:0: [sdb] Assuming drive cache: write through
    sdb: sdb1
    sd 4:0:0:0: [sdb] Attached SCSI removable disk
    gen_RefreshLedState first init
    =================> NIC version : C-cut
    rtl819xSE 0000:03:00.0: firmware: requesting RTL8192SE/rtl8192sfw.bin
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x8, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    ===>ieee80211_start_scan_rsl()
    ====================>haha:IPSEnter()
    =========>NicIFDisableNIC()
    PHY_SetRtl8192seRfHalt save BB/RF
    ===========>NicIFEnableNIC()
    gen_RefreshLedState first init
    =================> NIC version : C-cut
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    Linking with Scytale,channel:6, qos:1, myHT:1, networkHT:0, mode:4 cur_net.flags:0x40a
    ===>ieee80211_associate_procedure_wq(), chan:6
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x4, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    #################ieee80211_sta_send_associnfo(), assocreq_ies_len:81,assocresp_ies_len:105
    ===>u4bAcParam:a425, ===>u4bAcParam:a449, ===>u4bAcParam:5e431c, ===>u4bAcParam:2f321c, <6>Associated successfully
    ============>normal associate
    Using G rates:108
    Successfully associated, ht not enabled(0, 0)
    ===========rtl8192se_update_ratr_table: ff5
    ===>set to B/G mode
    ========>dm_check_edca_turbo():iot peer is unknown, bssid:00:1c:0e:41:2b:e1
    ===>DHCP Protocol start tx DHCP pkt src port:68, dest port:67!!
    LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    wlan0: no IPv6 routers present
    rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again
    LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
    When I pass iommu=off, it slows to unusable but does not cause a kernel panic.
    Last edited by sharpie (2009-11-05 03:32:39)

  • [Solved] Laptop Suspend puts Hard Drive into Read-Only

    My problem is that s2ram brings back X (and the virtual console, if I'm on one), but never the hard drive.
    s2ram -f -a 1 suspends just like s2ram -f. -a 2 and 3 just make a high pitched sound.
    I tried both http://wiki.archlinux.org/index.php/Suspend_to_RAM and http://wiki.archlinux.org/index.php/Pm-utils methods.
    I updated my BIOS drivers but that didn't help
    s2disk works perfectly.
    This is a COMPAQ Presario CQ60-215DX
    Here is my log of the trouble during resume:
    ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    sd 3:0:0:0: [sda] Starting disk
    ata4.00: qc timeout (cmd 0xec)
    ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    ata4.00: revalidation failed (errno=-5)
    ata3.00: qc timeout (cmd 0xa1)
    ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    ata3.00: revalidation failed (errno=-5)
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata3.00: qc timeout (cmd 0xa1)
    ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    ata3.00: revalidation failed (errno=-5)
    ata3: limiting SATA link speed to 1.5 Gbps
    ata4.00: qc timeout (cmd 0xec)
    ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    ata4.00: revalidation failed (errno=-5)
    ata4: limiting SATA link speed to 1.5 Gbps
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata4: SATA link up <unknown> (SStatus 103 SControl 310)
    And my full log:
    Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009
    Command line: root=/dev/disk/by-uuid/9ae7dfa5-74b2-41e2-89bc-b344bbf47109 ro
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    Centaur CentaurHauls
    libata version 3.00 loaded.
    pata_amd 0000:00:06.0: version 0.4.1
    pata_amd 0000:00:06.0: setting latency timer to 64
    scsi0 : pata_amd
    scsi1 : pata_amd
    ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
    ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
    ahci 0000:00:09.0: version 3.0
    ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 22
    ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 22 (level, low) -> IRQ 22
    ahci 0000:00:09.0: irq 25 for MSI/MSI-X
    ahci 0000:00:09.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl IDE mode
    ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio slum part
    ahci 0000:00:09.0: setting latency timer to 64
    scsi2 : ahci
    scsi3 : ahci
    ata3: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004100 irq 25
    ata4: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004180 irq 25
    ata2: port disabled. ignoring.
    Clocksource tsc unstable (delta = 4397486409693 ns)
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata4.00: ATA-8: TOSHIBA MK2555GSX, FG002C, max UDMA/100
    ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata4.00: configured for UDMA/100
    ata3.00: ATAPI: Optiarc DVD RW AD-7580S, FH03, max UDMA/100
    ata3.00: configured for UDMA/100
    scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7580S FH03 PQ: 0 ANSI: 5
    scsi 3:0:0:0: Direct-Access ATA TOSHIBA MK2555GS FG00 PQ: 0 ANSI: 5
    Driver 'sr' needs updating - please use bus_type methods
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 2:0:0:0: Attached scsi CD-ROM sr0
    Driver 'sd' needs updating - please use bus_type methods
    sd 3:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
    sd 3:0:0:0: [sda] Write Protect is off
    sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 < sda5 > sda4
    sd 3:0:0:0: [sda] Attached SCSI disk
    EXT4-fs: INFO: recovery required on readonly filesystem.
    EXT4-fs: write access will be enabled during recovery.
    EXT4-fs: barriers enabled
    kjournald2 starting: pid 569, dev sda2:8, commit interval 5 seconds
    EXT4-fs: delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs: sda2: orphan cleanup on readonly fs
    ext4_orphan_cleanup: deleting unreferenced inode 148384
    ext4_orphan_cleanup: deleting unreferenced inode 147907
    ext4_orphan_cleanup: deleting unreferenced inode 147903
    EXT4-fs: sda2: 3 orphan inodes deleted
    EXT4-fs: recovery complete.
    EXT4-fs: mounted filesystem sda2 with ordered data mode
    rtc_cmos 00:06: RTC can wake from S4
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
    udev: starting version 141
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    ACPI: AC Adapter [ADP1] (on-line)
    forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
    ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
    forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
    forcedeth 0000:00:0a.0: setting latency timer to 64
    sr 2:0:0:0: Attached scsi generic sg0 type 5
    sd 3:0:0:0: Attached scsi generic sg1 type 0
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    cfg80211: Calling CRDA to update world regulatory domain
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    ACPI: Power Button [PWRF]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    ACPI: Lid Switch [LID0]
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
    ACPI: Sleep Button [SLPB]
    input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
    ACPI: Power Button [PWRB]
    processor ACPI_CPU:00: registered as cooling_device0
    processor ACPI_CPU:01: registered as cooling_device1
    forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1f:16:74:cb:72
    forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt lnktim msi desc-v3
    ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 17
    ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 17 (level, low) -> IRQ 17
    ehci_hcd 0000:00:02.1: setting latency timer to 64
    ehci_hcd 0000:00:02.1: EHCI Host Controller
    ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:02.1: debug port 1
    ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
    ehci_hcd 0000:00:02.1: irq 17, io mem 0xc0007000
    ACPI: WMI: Mapper loaded
    ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 3 ports detected
    i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
    i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000
    ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 17
    ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 17 (level, low) -> IRQ 17
    ohci_hcd 0000:00:02.0: setting latency timer to 64
    ohci_hcd 0000:00:02.0: OHCI Host Controller
    ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:02.0: irq 17, io mem 0xc0006000
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    ACPI: PCI Interrupt Link [Z011] enabled at IRQ 16
    ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z011] -> GSI 16 (level, low) -> IRQ 16
    ehci_hcd 0000:00:04.1: setting latency timer to 64
    ehci_hcd 0000:00:04.1: EHCI Host Controller
    ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 3
    ehci_hcd 0000:00:04.1: debug port 1
    ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
    ehci_hcd 0000:00:04.1: irq 16, io mem 0xc0007400
    ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 4 ports detected
    ACPI: PCI Interrupt Link [Z010] enabled at IRQ 16
    ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z010] -> GSI 16 (level, low) -> IRQ 16
    ohci_hcd 0000:00:04.0: setting latency timer to 64
    ohci_hcd 0000:00:04.0: OHCI Host Controller
    ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
    ohci_hcd 0000:00:04.0: irq 16, io mem 0xc0008000
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 4 ports detected
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [TZS0] (68 C)
    ACPI: Battery Slot [BAT0] (battery present)
    thermal LNXTHERM:02: registered as thermal_zone1
    ACPI: Thermal Zone [TZS1] (68 C)
    usb 1-1: new high speed USB device using ehci_hcd and address 2
    nvidia: module license 'NVIDIA' taints kernel.
    Disabling lock debugging due to kernel taint
    usb 1-1: configuration #1 chosen from 1 choice
    Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa00000
    acpi device:13: registered as cooling_device2
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:10/device:11/input/input6
    ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    usb 3-4: new high speed USB device using ehci_hcd and address 2
    input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
    ath5k 0000:07:00.0: PCI INT A -> Link[Z012] -> GSI 23 (level, low) -> IRQ 23
    ath5k 0000:07:00.0: setting latency timer to 64
    ath5k 0000:07:00.0: registered as 'phy0'
    usb 3-4: configuration #1 chosen from 1 choice
    ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 20
    nvidia 0000:02:00.0: PCI INT A -> Link[LGPU] -> GSI 20 (level, low) -> IRQ 20
    nvidia 0000:02:00.0: setting latency timer to 64
    NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.31 Tue Jul 28 17:52:27 PDT 2009
    EXT4 FS on sda2, internal journal on sda2:8
    Adding 3148700k swap on /dev/sda5. Priority:-1 extents:1 across:3148700k
    scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
    sd 4:0:0:0: Attached scsi generic sg2 type 0
    usb-storage: device scan complete
    sd 4:0:0:0: [sdb] Attached SCSI removable disk
    scsi 5:0:0:0: Direct-Access USB Driver 0.00 PQ: 0 ANSI: 0 CCS
    sd 5:0:0:0: Attached scsi generic sg3 type 0
    usb-storage: device scan complete
    sd 5:0:0:0: [sdc] 7827456 512-byte hardware sectors: (4.00 GB/3.73 GiB)
    sd 5:0:0:0: [sdc] Write Protect is off
    sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
    sd 5:0:0:0: [sdc] Assuming drive cache: write through
    sd 5:0:0:0: [sdc] Assuming drive cache: write through
    sdc:
    sd 5:0:0:0: [sdc] Attached SCSI removable disk
    forcedeth 0000:00:0a.0: irq 26 for MSI/MSI-X
    eth0: no link during initialization.
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    PM: Syncing filesystems ... done.
    Freezing user space processes ... (elapsed 0.00 seconds) done.
    Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    Suspending console(s) (use no_console_suspend to debug)
    sd 3:0:0:0: [sda] Synchronizing SCSI cache
    sd 3:0:0:0: [sda] Stopping disk
    ath5k 0000:07:00.0: PCI INT A disabled
    forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
    forcedeth 0000:00:0a.0: PME# disabled
    forcedeth 0000:00:0a.0: PCI INT A disabled
    HDA Intel 0000:00:07.0: PCI INT A disabled
    ata2: port disabled. ignoring.
    ehci_hcd 0000:00:04.1: PCI INT B disabled
    ehci_hcd 0000:00:04.1: PME# disabled
    ohci_hcd 0000:00:04.0: PCI INT A disabled
    ohci_hcd 0000:00:04.0: PME# disabled
    ehci_hcd 0000:00:02.1: PCI INT B disabled
    ehci_hcd 0000:00:02.1: PME# disabled
    ohci_hcd 0000:00:02.0: PCI INT A disabled
    ohci_hcd 0000:00:02.0: PME# disabled
    ACPI: Preparing to enter system sleep state S3
    Disabling non-boot CPUs ...
    CPU 1 is now offline
    SMP alternatives: switching to UP code
    CPU0 attaching NULL sched-domain.
    CPU1 attaching NULL sched-domain.
    CPU0 attaching NULL sched-domain.
    CPU1 is down
    Extended CMOS year: 2000
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Back to C!
    Extended CMOS year: 2000
    Enabling non-boot CPUs ...
    SMP alternatives: switching to SMP code
    Booting processor 1 APIC 0x1 ip 0x6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 4001.76 BogoMIPS (lpj=6666816)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: AMD Athlon Dual-Core QL-62 stepping 01
    CPU0 attaching NULL sched-domain.
    Switched to high resolution mode on CPU 1
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    CPU1 is up
    ACPI: Waking up from system sleep state S3
    ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
    ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
    ohci_hcd 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
    ehci_hcd 0000:00:04.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
    pata_amd 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00005, writing 0xb80005)
    HDA Intel 0000:00:07.0: restoring config space at offset 0xf (was 0x5020100, writing 0x502010a)
    HDA Intel 0000:00:07.0: restoring config space at offset 0x4 (was 0x0, writing 0xc0000000)
    HDA Intel 0000:00:07.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00002)
    ahci 0000:00:09.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00407)
    pcieport-driver 0000:00:14.0: restoring config space at offset 0x7 (was 0x1f1, writing 0x200001f1)
    pcieport-driver 0000:00:14.0: restoring config space at offset 0x1 (was 0x100107, writing 0x1005
    nvidia 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
    nvidia 0000:02:00.0: restoring config space at offset 0x9 (was 0x1, writing 0x4001)
    nvidia 0000:02:00.0: restoring config space at offset 0x7 (was 0xc, writing 0xc400000c)
    nvidia 0000:02:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xd000000c)
    ath5k 0000:07:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
    nForce2_smbus 0000:00:01.1: PME# disabled
    ohci_hcd 0000:00:02.0: PME# disabled
    ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 17 (level, low) -> IRQ 17
    ohci_hcd 0000:00:02.0: setting latency timer to 64
    ohci_hcd 0000:00:02.0: PME# disabled
    ehci_hcd 0000:00:02.1: PME# disabled
    ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 17 (level, low) -> IRQ 17
    ehci_hcd 0000:00:02.1: setting latency timer to 64
    ehci_hcd 0000:00:02.1: PME# disabled
    usb usb1: root hub lost power or was reset
    ehci_hcd 0000:00:02.1: debug port 1
    ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
    ohci_hcd 0000:00:04.0: PME# disabled
    ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z010] -> GSI 16 (level, low) -> IRQ 16
    ohci_hcd 0000:00:04.0: setting latency timer to 64
    ohci_hcd 0000:00:04.0: PME# disabled
    ehci_hcd 0000:00:04.1: PME# disabled
    ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z011] -> GSI 16 (level, low) -> IRQ 16
    ehci_hcd 0000:00:04.1: setting latency timer to 64
    ehci_hcd 0000:00:04.1: PME# disabled
    usb usb3: root hub lost power or was reset
    ehci_hcd 0000:00:04.1: debug port 1
    ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
    pata_amd 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00005, writing 0xb80005)
    pata_amd 0000:00:06.0: setting latency timer to 64
    ata2: port disabled. ignoring.
    HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 19 (level, low) -> IRQ 19
    HDA Intel 0000:00:07.0: setting latency timer to 64
    pci 0000:00:08.0: setting latency timer to 64
    ahci 0000:00:09.0: setting latency timer to 64
    forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
    forcedeth 0000:00:0a.0: PME# disabled
    ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    forcedeth 0000:00:0a.0: irq 26 for MSI/MSI-X
    eth0: no link during initialization.
    pci 0000:00:0b.0: setting latency timer to 64
    ath5k 0000:07:00.0: PCI INT A -> Link[Z012] -> GSI 23 (level, low) -> IRQ 23
    sd 3:0:0:0: [sda] Starting disk
    ata4.00: qc timeout (cmd 0xec)
    ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    ata4.00: revalidation failed (errno=-5)
    ata3.00: qc timeout (cmd 0xa1)
    ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    ata3.00: revalidation failed (errno=-5)
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata3.00: qc timeout (cmd 0xa1)
    ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    ata3.00: revalidation failed (errno=-5)
    ata3: limiting SATA link speed to 1.5 Gbps
    ata4.00: qc timeout (cmd 0xec)
    ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    ata4.00: revalidation failed (errno=-5)
    ata4: limiting SATA link speed to 1.5 Gbps
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata4: SATA link up <unknown> (SStatus 103 SControl 310)
    ata4.00: qc timeout (cmd 0xec)
    ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    ata4.00: revalidation failed (errno=-5)
    ata4.00: disabled
    ata3.00: qc timeout (cmd 0xa1)
    ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    ata3.00: revalidation failed (errno=-5)
    ata3.00: disabled
    sd 3:0:0:0: [sda] START_STOP FAILED
    sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
    sd 3:0:0:0: [sda] Unhandled error code
    sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
    end_request: I/O error, dev sda, sector 134590273
    Buffer I/O error on device sda2, logical block 1094141
    lost page write due to I/O error on sda2
    sd 3:0:0:0: [sda] Unhandled error code
    sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
    end_request: I/O error, dev sda, sector 135807281
    Buffer I/O error on device sda2, logical block 1246267
    lost page write due to I/O error on sda2
    sd 3:0:0:0: [sda] Unhandled error code
    sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
    end_request: I/O error, dev sda, sector 135815833
    Buffer I/O error on device sda2, logical block 1247336
    lost page write due to I/O error on sda2
    JBD2: Detected IO errors while flushing file data on sda2:8
    sd 3:0:0:0: [sda] Unhandled error code
    sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
    end_request: I/O error, dev sda, sector 155463993
    Aborting journal on device sda2:8.
    sd 3:0:0:0: [sda] Unhandled error code
    sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
    end_request: I/O error, dev sda, sector 155459417
    Buffer I/O error on device sda2, logical block 3702784
    lost page write due to I/O error on sda2
    JBD2: I/O error detected when updating journal superblock for sda2:8.
    PM: Device 3:0:0:0 failed to resume: error 262144
    usb 1-1: reset high speed USB device using ehci_hcd and address 2
    usb 3-4: reset high speed USB device using ehci_hcd and address 2
    Restarting tasks ... <2>ext4_abort called.
    EXT4-fs error (device sda2): ext4_journal_start_sb: Detected aborted journal
    Remounting filesystem read-only
    ext4_da_writepages: jbd2_start: 1024 pages, ino 131086; err -30
    Pid: 20, comm: pdflush Tainted: P 2.6.30-ARCH #1
    Call Trace:
    [<ffffffffa00d738d>] ? ext4_da_writepages+0x47d/0x4b0 [ext4]
    [<ffffffff8026c6a4>] ? bit_waitqueue+0x24/0xe0
    [<ffffffff802c8332>] ? do_writepages+0x32/0x60
    [<ffffffff80321b7a>] ? __writeback_single_inode+0xba/0x490
    [<ffffffff802406e6>] ? dequeue_task_fair+0x56/0x1d0
    [<ffffffff8020a95c>] ? __switch_to+0xdc/0x3b0
    [<ffffffff803223b3>] ? generic_sync_sb_inodes+0x193/0x530
    [<ffffffff803229c5>] ? writeback_inodes+0x65/0x120
    [<ffffffff802c85a6>] ? wb_kupdate+0xc6/0x160
    [<ffffffff802c995b>] ? pdflush+0x16b/0x2a0
    [<ffffffff802c84e0>] ? wb_kupdate+0x0/0x160
    [<ffffffff802c97f0>] ? pdflush+0x0/0x2a0
    [<ffffffff802c97f0>] ? pdflush+0x0/0x2a0
    [<ffffffff8026c204>] ? kthread+0x64/0xc0
    [<ffffffff8024af20>] ? schedule_tail+0x30/0x80
    [<ffffffff8020d4fa>] ? child_rip+0xa/0x20
    [<ffffffff8026c1a0>] ? kthread+0x0/0xc0
    [<ffffffff8020d4f0>] ? child_rip+0x0/0x20
    sd 3:0:0:0: [sda] Unhandled error code
    sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
    end_request: I/O error, dev sda, sector 126637417
    sd 3:0:0:0: [sda] Unhandled error code
    sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
    end_request: I/O error, dev sda, sector 126637417
    sd 3:0:0:0: [sda] Unhandled error code
    sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
    end_request: I/O error, dev sda, sector 126637417
    sd 3:0:0:0: [sda] Unhandled error code
    sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
    end_request: I/O error, dev sda, sector 126637417
    sd 3:0:0:0: [sda] Unhandled error code
    sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
    end_request: I/O error, dev sda, sector 126637417
    done.
    sd 3:0:0:0: [sda] Unhandled error code
    sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
    end_request: I/O error, dev sda, sector 130097993
    EXT4-fs error (device sda2): ext4_find_entry: reading directory #139292 offset 0
    sd 3:0:0:0: [sda] Unhandled error code
    sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
    end_request: I/O error, dev sda, sector 126637417
    sd 3:0:0:0: [sda] Unhandled error code
    sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
    end_request: I/O error, dev sda, sector 126004889
    EXT4-fs error (device sda2): ext4_find_entry: reading directory #98457 offset 0
    sd 3:0:0:0: [sda] Unhandled error code
    sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
    end_request: I/O error, dev sda, sector 126004889
    EXT4-fs error (device sda2): ext4_find_entry: reading directory #98457 offset 0
    ANY help would be much appreciated.
    Last edited by Cappy (2009-08-10 08:19:09)

    Nevermind .. *sigh* ... pci=msi on the kernel fixed it .. going to go cut myself now ...

  • Firewire avc1394 camcorder to v4l for ekiga and cheese

    (this is detailed and lengthy because i couldn't find anything in arch that discussed it -- hopefully now searchers will have a jump point]
    the camcorder is attached via firewire from pcmcia
    $ dmesg
    ieee1394: Node suspended: ID:BUS[0-01:1023] GUID[080046010486c1ba]
    pccard: card ejected from slot 1
    ieee1394: Node removed: ID:BUS[0-00:1023] GUID[0011060000003860]
    ieee1394: Node removed: ID:BUS[0-01:1023] GUID[080046010486c1ba]
    ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
    ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
    usb 2-2: USB disconnect, address 2
    Clocksource tsc unstable (delta = -342190846 ns)
    pccard: CardBus card inserted into slot 1
    PCI: Enabling device 0000:07:00.0 (0080 -> 0083)
    ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:07:00.0 to 64
    ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[c8000000-c80007ff] Max Packet=[1024] IR/IT contexts=[8/8]
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011060000003860]
    ieee1394: Node added: ID:BUS[0-00:1023] GUID[080046010486c1ba]
    ieee1394: Node changed: 0-00:1023 -> 0-01:1023
    i think i have all the modules
    $ lsmod |grep 1394
    raw1394 23932 0
    dv1394 16988 0
    ohci1394 28848 1 dv1394
    ieee1394 80568 3 raw1394,dv1394,ohci1394
    these devices exist
    $ /dev/raw1394 /dev/dv1394 -l
    crw-rw---- 1 root video 171, 0 2008-01-31 00:34 /dev/raw1394
    /dev/dv1394:
    total 0
    crw-rw---- 1 root video 171, 32 2008-01-31 11:19 0
    and dvgrab and kino work fine
    $ dvgrab
    Found AV/C device with GUID 0x080046010486c1ba
    Warning: Cannot set RR-scheduler
    Warning: Cannot disable swapping
    Capture Started
    "dvgrab-001.dv": 4.92 MiB 43 frames timecode 00:00:09.12 date 2008.02.01 12:44:00
    Capture Stopped
    However, ekiga (which correctly identifies the sony dcr-hc32 on auto detect) only shows a green screen and not the usual broken camera bouncy thing
    http://www.flickr.com/photos/54364666@N00/2233176806
    this is apparently a known bug in ekiga  2.0.11 (http://www.nabble.com/ekiga-2.1.0-svn.- … 81873.html)
    somewhere else there was also concern with pwlib plugins. Other distros do pwlib-plugin type packages. arch doesn't?
    $pacman -Qi pwlib ~
    Name : pwlib
    Version : 1.10.10-2
    $ pacman -Ql pwlib|grep plugin
    pwlib /usr/include/ptlib/plugin.h
    pwlib /usr/include/ptlib/pluginmgr.h
    pwlib /usr/lib/pwlib/devices/sound/alsa_pwplugin.so
    pwlib /usr/lib/pwlib/devices/sound/oss_pwplugin.so
    pwlib /usr/lib/pwlib/devices/videoinput/avc_pwplugin.so
    pwlib /usr/lib/pwlib/devices/videoinput/dc_pwplugin.so
    pwlib /usr/lib/pwlib/devices/videoinput/v4l2_pwplugin.so
    pwlib /usr/lib/pwlib/devices/videoinput/v4l_pwplugin.so
    pwlib /usr/share/pwlib/make/plugins.mak
    Either way, i'd like to also use gnome's cheese (just for fun) or potentially skype video. Using the minidv camcorder as a v4l device would enable this and hopefully work around the ekiga bug.
    It seems there are a few choices to do this. None of which I could get to work.
    http://www.lavrsen.dk/twiki/bin/view/Motion/VideoFourLinuxLoopbackDevice wrote:
    How can i use vloopback to use my firewire cam as a V4L device ?
    Load vloopback
      modprobe vloopback
    You need to use Coriander and set on services tab V4L
    And then you will have a V4L in /dev/video1.
    but this won't work for this case (though i did build it, and updated the out of date lib{raw,dc}1394. I downgraded before trying the other options.
    http://damien.douxchamps.net/ieee1394/coriander/ wrote:However, any cameras in which you can insert a video tape (camcorders,...) will NOT work with coriander. These cameras record compressed DV video on the tape, while the IIDC specify uncompressed, on-the-fly video flows. If you wish to use a camcorder you should have a look at Kino instead.
    so the choices seem to be
    http://man.cx/dc1394_vloopback(1) wrote:dc1394_vloopback      [--daemon]      [--pipe]     [--guid=camera-euid]
           [--video1394=/dev/video1394/x]                [--vloopback=/dev/video0]
           [--palette=yuv422|rgb24] [--width=n] [--height=n]
           Sends  format0 640x480 RGB to the vloopback input device so that it can
           be consumed by V4L applications on the vloopback output device.
    or
    https://sourceforge.net/docman/display_doc.php?docid=49125&group_id=193697 wrote:3.  First you have to attach your camcorder to your firewire port and swith it on. Now start dv2vloopback with this:
          ./dv2vloopback /dev/video0 352x288x24 25
          The first parameter is the video device that will be used (it modprobes vloopback and by default the virtual device is in /dev/video0 so no problem), the next three parameters are the width, height and color depth and the last parameter is the frames per second.
    Both of the potential solutions require vloopback, which is in the aur (vloopback 1.1rc1).
    $ yaourt -S vloopback
    $ sudo modprobe vloopback
    $ lsmod |grep vloopback
    vloopback 12896 0
    videodev 26880 1 vloopback
    The first choice (dc1394_vloopback) is part of the libdc1394 package which is already installed. So its a good one to start with.
    $ dc1394_vloopback ~
    unable to start camera iso transmission
    : Success
    $
    I have no idea what this means, but because it has an option to run as a daemon, i'd imagine it is suppose to lock up the terminal instead of exit.
    $ dc1394_vloopback --video1394=/dev/dv1394/0
    unable to start camera iso transmission
    : Success
    $ dc1394_vloopback --video1394=/dev/dv1394/0 --width=720 --height=480
    unable to start camera iso transmission
    : Success
    $ dc1394_vloopback --video1394 /dev/dv1394/0 --width 480 --height 720
    unable to start camera iso transmission
    : Success
    $ dc1394_vloopback --video1394 /dev/dv1394/0 --width 720 --height 480
    unable to start camera iso transmission
    : Success
    no luck trying different options. onto the other potential solution
    dv2vloopbak is not in the aur. So i tried a quick pkgbuild. (didn't submit it, because it doesn't work for me)
    PKGBUILD wrote:
    pkgname=dv2vloopback
    pkgver=0.02
    pkgrel=1
    pkgdesc="This is a program that will enable you to use your camcorder as a v4l device."
    url="https://sourceforge.net/projects/dv2vloopback/"
    depends=('vloopback')
    conflicts=()
    license=
    arch=('i686')
    source=(http://superb-east.dl.sourceforge.net/sourceforge/dv2vloopback/dv2vloopback${pkgver}.tar.gz)
    build() {
      cd $startdir/src/$pkgname
      make || return 1
      install -D -m 755 ./dv2vloopback $startdir/pkg/usr/bin/dv2vloopback
    $ makepkg
    $ sudo pacman -U ...
    $ dv2vloopback /dev/video0 352x288x24 10
    Found AV/C device with GUID 0x080046010486c1ba
    Warning: Cannot set RR-scheduler
    Warning: Cannot disable swapping
    Capture Started
    "/tmp/webcam.jpg": 0.00 MiB 2 frames timecode 45:85:85.45 date 2008.02.01 14:04:54
    Capture Stopped
    Found AV/C device with GUID 0x080046010486c1ba
    Warning: Cannot set RR-scheduler
    Warning: Cannot disable swapping
    Capture Started
    "/tmp/webcam.jpg": 0.00 MiB 2 frames timecode 45:85:85.45 date 2008.02.01 14:04:55
    Capture Stopped
    Found AV/C device with GUID 0x080046010486c1ba
    Warning: Cannot set RR-scheduler
    Warning: Cannot disable swapping
    Capture Started
    "/tmp/webcam.jpg": 0.00 MiB 2 frames timecode 45:85:85.45 date 2008.02.01 14:04:56
    Capture Stopped
    Found AV/C device with GUID 0x080046010486c1ba
    Warning: Cannot set RR-scheduler
    Warning: Cannot disable swapping
    Capture Started
    "/tmp/webcam.jpg": 0.00 MiB 2 frames timecode 45:85:85.45 date 2008.02.01 14:04:57
    Capture Stopped
    Found AV/C device with GUID 0x080046010486c1ba
    Warning: Cannot set RR-scheduler
    Warning: Cannot disable swapping
    Capture Started
    "/tmp/webcam.jpg": 0.00 MiB 2 frames timecode 45:85:85.45 date 2008.02.01 14:04:57
    Capture Stopped
    Found AV/C device with GUID 0x080046010486c1ba
    Warning: Cannot set RR-scheduler
    Warning: Cannot disable swapping
    Capture Started
    "/tmp/webcam.jpg": 0.00 MiB 2 frames timecode 45:85:85.45 date 2008.02.01 14:04:58
    Capture Stopped
    $sudo dv2vloopback /dev/video0 352x288x24 10 dv2loopback
    Found AV/C device with GUID 0x080046010486c1ba
    Capture Started
    "/tmp/webcam.jpg": buffer underrun near: timecode 45:85:85.45 date 2008.02.01 14:06:38
    This error means that the frames could not be written fast enough.
    "/tmp/webcam.jpg": 0.00 MiB 2 frames timecode 45:85:85.45 date 2008.02.01 14:06:42
    Capture Stopped
    Warning: 1 dropped frames.
    Found AV/C device with GUID 0x080046010486c1ba
    Capture Started
    "/tmp/webcam.jpg": buffer underrun near: timecode 45:85:85.45 date 2008.02.01 14:06:46
    This error means that the frames could not be written fast enough.
    "/tmp/webcam.jpg": 0.00 MiB 2 frames timecode 45:85:85.45 date 2008.02.01 14:06:46
    Capture Stopped
    Warning: 1 dropped frames.
    Found AV/C device with GUID 0x080046010486c1ba
    Capture Started
    the command, both with and wihtout sudo, continue until ctrl+c kills it.
    Somewhere someone has to have a minidv camcorder working with v4l!? anyone doing it on arch -- or anyone see a glaring mistake?
    Thanks
    Will

    faltino wrote:
    Hello, I have a problem with installation of dv4l. I have installed vloopback from svn, since I have the latest kernel.
    After ./configure I do:
    $ make
    cc -Wall -O3 -MMD -c -o normfile.o normfile.c
    cc -Wall -O3 -MMD -c -o palettes.o palettes.c
    cc -Wall -O3 -MMD -c -o scale.o scale.c
    cc -Wall -O3 -MMD -c -o util.o util.c
    cc -Wall -O3 -MMD -c -o dv4l.o dv4l.c
    dv4l.c: In function 'mmap_mode':
    dv4l.c:789:7: warning: dereferencing type-punned pointer will break strict-aliasing rules
    cc -lraw1394 -liec61883 -ldv -o dv4l normfile.o palettes.o scale.o util.o dv4l.o
    cc -Wall -O3 -shared -fpic -Wl,-soname,libdv4l.so \
    -D DV4LLIBNAME=/usr/local/lib/libdv4l.so \
    -ldl -lraw1394 -liec61883 -ldv interdv4l.c \
    normfile.c scale.c palettes.c util.c -o libdv4l.so
    In file included from interdv4l.c:46:0:
    /usr/include/sys/stat.h:504:1: error: conflicting types for 'stat64'
    /usr/include/sys/stat.h:230:12: note: previous declaration of 'stat64' was here
    /usr/include/sys/stat.h:511:1: error: conflicting types for 'lstat64'
    /usr/include/sys/stat.h:278:12: note: previous declaration of 'lstat64' was here
    /usr/include/sys/stat.h:518:1: error: conflicting types for 'fstat64'
    /usr/include/sys/stat.h:232:12: note: previous declaration of 'fstat64' was here
    /usr/include/sys/stat.h:525:1: error: conflicting types for 'fstatat64'
    /usr/include/sys/stat.h:255:12: note: previous declaration of 'fstatat64' was here
    interdv4l.c:134:1: warning: 'struct stat64' declared inside parameter list
    interdv4l.c: In function 'common_lstat64':
    interdv4l.c:134:1: error: dereferencing pointer to incomplete type
    interdv4l.c:134:1: error: dereferencing pointer to incomplete type
    interdv4l.c:134:1: error: dereferencing pointer to incomplete type
    interdv4l.c:134:1: error: dereferencing pointer to incomplete type
    interdv4l.c:134:1: error: dereferencing pointer to incomplete type
    interdv4l.c:134:1: error: dereferencing pointer to incomplete type
    interdv4l.c:134:1: error: dereferencing pointer to incomplete type
    interdv4l.c:134:1: error: dereferencing pointer to incomplete type
    interdv4l.c:134:1: error: dereferencing pointer to incomplete type
    interdv4l.c:134:1: error: dereferencing pointer to incomplete type
    interdv4l.c:134:1: error: dereferencing pointer to incomplete type
    interdv4l.c:134:1: error: dereferencing pointer to incomplete type
    interdv4l.c: At top level:
    interdv4l.c:136:1: warning: 'struct stat64' declared inside parameter list
    interdv4l.c: In function 'common___xstat64':
    interdv4l.c:136:1: error: dereferencing pointer to incomplete type
    interdv4l.c:136:1: error: dereferencing pointer to incomplete type
    interdv4l.c:136:1: error: dereferencing pointer to incomplete type
    interdv4l.c:136:1: error: dereferencing pointer to incomplete type
    interdv4l.c:136:1: error: dereferencing pointer to incomplete type
    interdv4l.c:136:1: error: dereferencing pointer to incomplete type
    interdv4l.c:136:1: error: dereferencing pointer to incomplete type
    interdv4l.c:136:1: error: dereferencing pointer to incomplete type
    interdv4l.c:136:1: error: dereferencing pointer to incomplete type
    interdv4l.c:136:1: error: dereferencing pointer to incomplete type
    interdv4l.c:136:1: error: dereferencing pointer to incomplete type
    interdv4l.c:136:1: error: dereferencing pointer to incomplete type
    interdv4l.c: At top level:
    interdv4l.c:138:1: warning: 'struct stat64' declared inside parameter list
    interdv4l.c: In function 'common___lxstat64':
    interdv4l.c:138:1: error: dereferencing pointer to incomplete type
    interdv4l.c:138:1: error: dereferencing pointer to incomplete type
    interdv4l.c:138:1: error: dereferencing pointer to incomplete type
    interdv4l.c:138:1: error: dereferencing pointer to incomplete type
    interdv4l.c:138:1: error: dereferencing pointer to incomplete type
    interdv4l.c:138:1: error: dereferencing pointer to incomplete type
    interdv4l.c:138:1: error: dereferencing pointer to incomplete type
    interdv4l.c:138:1: error: dereferencing pointer to incomplete type
    interdv4l.c:138:1: error: dereferencing pointer to incomplete type
    interdv4l.c:138:1: error: dereferencing pointer to incomplete type
    interdv4l.c:138:1: error: dereferencing pointer to incomplete type
    interdv4l.c:138:1: error: dereferencing pointer to incomplete type
    interdv4l.c: At top level:
    interdv4l.c:167:1: warning: 'struct stat64' declared inside parameter list
    interdv4l.c:167:1: warning: 'struct stat64' declared inside parameter list
    interdv4l.c:167:1: error: conflicting types for '__xstat64'
    /usr/include/sys/stat.h:436:12: note: previous declaration of '__xstat64' was here
    interdv4l.c: In function '__xstat64':
    interdv4l.c:167:1: warning: passing argument 3 of 'orig__xstat64' from incompatible pointer type
    interdv4l.c:167:1: note: expected 'struct stat64 *' but argument is of type 'struct stat64 *'
    interdv4l.c:167:1: warning: passing argument 3 of 'common___xstat64' from incompatible pointer type
    interdv4l.c:136:1: note: expected 'struct stat64 *' but argument is of type 'struct stat64 *'
    interdv4l.c: At top level:
    interdv4l.c:169:1: warning: 'struct stat64' declared inside parameter list
    interdv4l.c:169:1: warning: 'struct stat64' declared inside parameter list
    interdv4l.c:169:1: error: conflicting types for '__lxstat64'
    /usr/include/sys/stat.h:438:12: note: previous declaration of '__lxstat64' was here
    interdv4l.c: In function '__lxstat64':
    interdv4l.c:169:1: warning: passing argument 3 of 'orig__lxstat64' from incompatible pointer type
    interdv4l.c:169:1: note: expected 'struct stat64 *' but argument is of type 'struct stat64 *'
    interdv4l.c:169:1: warning: passing argument 3 of 'common___lxstat64' from incompatible pointer type
    interdv4l.c:138:1: note: expected 'struct stat64 *' but argument is of type 'struct stat64 *'
    interdv4l.c: At top level:
    interdv4l.c:198:1: warning: 'struct stat64' declared inside parameter list
    interdv4l.c:198:1: warning: 'struct stat64' declared inside parameter list
    interdv4l.c:198:1: error: conflicting types for 'lstat64'
    /usr/include/sys/stat.h:278:12: note: previous declaration of 'lstat64' was here
    interdv4l.c: In function 'lstat64':
    interdv4l.c:198:1: warning: passing argument 2 of 'origlstat64' from incompatible pointer type
    interdv4l.c:198:1: note: expected 'struct stat64 *' but argument is of type 'struct stat64 *'
    interdv4l.c:198:1: warning: passing argument 3 of 'common_lstat64' from incompatible pointer type
    interdv4l.c:134:1: note: expected 'struct stat64 *' but argument is of type 'struct stat64 *'
    interdv4l.c: At top level:
    interdv4l.c:485:1: warning: 'struct stat64' declared inside parameter list
    interdv4l.c:485:1: warning: 'struct stat64' declared inside parameter list
    interdv4l.c:485:1: error: conflicting types for '__fxstat64'
    /usr/include/sys/stat.h:434:12: note: previous declaration of '__fxstat64' was here
    interdv4l.c: In function '__fxstat64':
    interdv4l.c:485:1: warning: passing argument 3 of 'orig__fxstat64' from incompatible pointer type
    interdv4l.c:485:1: note: expected 'struct stat64 *' but argument is of type 'struct stat64 *'
    interdv4l.c:485:1: error: dereferencing pointer to incomplete type
    interdv4l.c:485:1: error: dereferencing pointer to incomplete type
    interdv4l.c:485:1: error: dereferencing pointer to incomplete type
    make: *** [libdv4l.so] Error 1
    $ uname -a
    Linux kukri 2.6.33-ARCH #1 SMP PREEMPT Thu May 13 11:32:37 CEST 2010 x86_64 Intel(R) Core(TM)2 Quad CPU Q8300 @ 2.50GHz GenuineIntel GNU/Linux
    Could anyone help? I had everything working on 2.6.31
    I have the same problem.

  • Xf86-video-intel doesnt like my 945GME

    I run Archlinux on an HP mini 1000
    and have been having problems with anything and everything graphical.
    Namely, even 2d games lag.
    I get 6fps in super mario chronicles using
    smc -d game performance
    I get 132fps from glxgears, I do realised this is not a benchmark and all >.>
    Here is my /etc/X11/xorg.conf
    Section "ServerLayout"
    Identifier "Xorg Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    # PS/2 Mouse not detected
    # Serial Mouse not detected
    InputDevice "USB Mouse" "CorePointer"
    # InputDevice "Logitech MX rev" "CorePointer"
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    Option "AutoAddDevices" "False"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    # Additional fonts: Locale, Gimp, TTF...
    FontPath "/usr/share/fonts/cyrillic"
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "record"
    # Load "synaptics"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    Option "XkbVariant" ""
    EndSection
    Section "InputDevice"
    Identifier "Serial Mouse"
    Driver "mouse"
    Option "Protocol" "Microsoft"
    Option "Device" "/dev/ttyS0"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "PS/2 Mouse"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "ZAxisMapping" "4 5"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    Option "Protocol" "IMPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "5"
    EndSection
    ##logitech MX rev
    #Section "InputDevice"
    # Identifier "Logitech MX rev"
    # Driver "evdev"
    # Option "Phys" "usb-*/input0"
    # Option "CorePointer"
    #EndSection
    # Auto-generated by Archie mkxcfg
    Section "Monitor"
    Identifier "Monitor0"
    Option "DPMS" "true"
    # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
    HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
    VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
    # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    # Default modes distilled from
    # "VESA and Industry Standards and Guide for Computer Display Monitor
    # Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
    # 640x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
    # 720x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
    # 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
    ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    # 640x480 @ 72Hz (VESA) hsync: 37.9kHz
    ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    # 640x480 @ 75Hz (VESA) hsync: 37.5kHz
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    # 640x480 @ 85Hz (VESA) hsync: 43.3kHz
    ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    # 800x600 @ 56Hz (VESA) hsync: 35.2kHz
    ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    # 800x600 @ 60Hz (VESA) hsync: 37.9kHz
    ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    # 800x600 @ 72Hz (VESA) hsync: 48.1kHz
    ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    # 800x600 @ 75Hz (VESA) hsync: 46.9kHz
    ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    # 800x600 @ 85Hz (VESA) hsync: 53.7kHz
    ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    # 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
    ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
    # 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
    ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    # 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
    ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    # 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
    ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    # 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
    ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    # 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
    ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    # 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
    ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
    # 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
    ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
    # 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
    ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
    ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
    # 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
    ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
    ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
    ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
    ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
    # 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
    ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
    # 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
    ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
    # 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
    # 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
    # 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
    # Additional modelines
    ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    # Extended modelines with GTF timings
    # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
    ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
    # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
    ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
    # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
    ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
    # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
    ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
    # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
    ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
    # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
    ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
    # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
    ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
    # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
    ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
    # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
    ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
    # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
    ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
    # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
    ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
    # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
    ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
    # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
    ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
    # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
    ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
    # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
    ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
    # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
    ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
    # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
    ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
    # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
    ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
    # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
    ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
    # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
    ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
    # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
    ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Device"
    Option "DRI" "True"
    Option "FramebufferCompression" "True"
    Identifier "Card0"
    Driver "intel"
    VendorName "Intel Corporation"
    BusID "PCI:0:2:0"
    BoardName "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
    # Option "AccelMethod" "UXA"
    # Option "AccelMethod" "exa"
    # Option "ExaNoComposite" "false"
    # Option "MigrationHeuristic" "greedy"
    # Option "AccelMethod" "xaa"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultColorDepth 16
    SubSection "Display"
    Depth 1
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    I am using xf86-video-intel
    -legacy didnt work for me
    I have also tried -stable and -newest from the AUR to no prevail (same problem)
    and when I went to try -git, it didnt want to work for me.
    Here is my /var/log/Xorg.0.log
    X.Org X Server 1.6.3
    Release Date: 2009-7-31
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH i686
    Current Operating System: Linux minime 2.6.30-ARCH #1 SMP PREEMPT Mon Aug 17 18:04:53 CEST 2009 i686
    Build Date: 25 August 2009 09:20:48PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 29 08:46:06 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Xorg Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "USB Mouse"
    (**) Option "AllowMouseOpenFail" "true"
    (**) Option "AutoAddDevices" "False"
    (**) Not automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/PEX" does not exist.
    Entry deleted from font path.
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
    (WW) The directory "/usr/share/fonts/ttf/western" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
    Entry deleted from font path.
    (**) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/75dpi,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/100dpi,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) Loader magic: 0x640
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0:0:2:0) 8086:27ae:103c:361a Intel Corporation Mobile 945GME Express Integrated Graphics Controller rev 3, Mem @ 0xfe980000/524288, 0xd0000000/268435456, 0xfe940000/262144, I/O @ 0x0000dc80/8
    (--) PCI: (0:0:2:1) 8086:27a6:103c:361a Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xfe880000/524288
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "type1"
    (WW) Warning, couldn't open module type1
    (II) UnloadModule: "type1"
    (EE) Failed to load module "type1" (module does not exist, 0)
    (II) LoadModule: "freetype"
    (WW) Warning, couldn't open module freetype
    (II) UnloadModule: "freetype"
    (EE) Failed to load module "freetype" (module does not exist, 0)
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 2.7.99
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.4.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
    965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
    IGDNG_M
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: drmOpenMinor returns 7
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (**) intel(0): Depth 16, (--) framebuffer bpp 16
    (==) intel(0): RGB weight 565
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "DRI" "True"
    (**) intel(0): Option "FramebufferCompression" "True"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
    (--) intel(0): Chipset: "945GME"
    (--) intel(0): Linear framebuffer at 0xD0000000
    (--) intel(0): IO registers at addr 0xFE980000 size 524288
    (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
    (II) intel(0): No SDVO device is found in VBT
    (II) intel(0): 2 display pipes available.
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Monitor0
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) intel(0): EDID vendor "CPT", prod id 1260
    (II) intel(0): EDID vendor "CPT", prod id 1260
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS using initial mode 1024x600
    (II) intel(0): detected 256 kB GTT.
    (II) intel(0): detected 7932 kB stolen memory.
    (==) intel(0): video overlay key set to 0x83e
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (II) Loading sub module "dri2"
    (II) LoadModule: "dri2"
    (II) Reloading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 238848 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 955388 kB available
    (II) intel(0): [DRI2] Setup complete
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (**) intel(0): SwapBuffers wait enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (II) UXA(0): Driver registered support for the following operations:
    (II) solid
    (II) copy
    (II) composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000003f800000 physical
    (II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000003fe00000 physical
    (II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000003fe01000 physical
    (II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000003fe0b000 physical
    (II) intel(0): 0x007bf000: end of stolen memory
    (II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): BO memory allocation layout:
    (II) intel(0): 0x007bf000: start of memory manager
    (II) intel(0): 0x00800000-0x009fffff: front buffer (2048 kB) X tiled
    (II) intel(0): 0x0f9f4000: end of memory manager
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane B is now disabled and connected to pipe A.
    (WW) intel(0): Hardware claims pipe A is on while software believes it is off
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane A is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (**) Option "dpms" "true"
    (**) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder disabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: DRI2 Enabled
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    (II) GLX: Initialized DRI2 GL provider for screen 0
    (II) intel(0): Setting screen physical size to 222 x 130
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "us"
    (**) Keyboard0: XkbLayout: "us"
    (WW) Option "XkbVariant" requires an string value
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (**) Option "Protocol" "IMPS/2"
    (**) USB Mouse: Device: "/dev/input/mice"
    (**) USB Mouse: Protocol: "IMPS/2"
    (**) Option "SendCoreEvents" "true"
    (**) Option "CorePointer"
    (**) USB Mouse: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (**) Option "Buttons" "5"
    (==) USB Mouse: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5"
    (**) USB Mouse: ZAxisMapping: buttons 4 and 5
    (**) USB Mouse: Buttons: 9
    (**) USB Mouse: Sensitivity: 1
    (II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE)
    (**) USB Mouse: (accel) keeping acceleration scheme 1
    (**) USB Mouse: (accel) filter chain progression: 2.00
    (**) USB Mouse: (accel) filter stage 0: 20.00 ms
    (**) USB Mouse: (accel) set acceleration profile 0
    (II) USB Mouse: ps2EnableDataReporting: succeeded
    If you need anymore information just ask xD
    I appologise in advance if this question has been answered elsewhere, I did try look and followed the instructions in the other threads on similar topics but none worked for me. I also would like to appologise if this is in the wrong section of the forums.
    Thanks in advance,
    Ducky.

    I'm using xf86-video-intel. All packages from core and extra. Nothing compiled by hand or from testing.
    Maybe there are small and subtle differences in the hardware? Because otherwise it's not logical that you see these performance problems and I don't. Some people have seen their problems gone with kernel 2.6.31, It should be out in a week, so hopefully that solves your problems too.
    Anyway, I post my X log and dmesg, in case you can spot something there that could give you a clue.
    Xorg.0.log
    X.Org X Server 1.6.3
    Release Date: 2009-7-31
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH i686
    Current Operating System: Linux hpmini 2.6.30-ARCH #1 SMP PREEMPT Mon Aug 17 18:04:53 CEST 2009 i686
    Build Date: 25 August 2009 09:20:48PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 30 15:27:50 2009
    (II) Loader magic: 0x640
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0:0:2:0) 8086:27ae:103c:361a Intel Corporation Mobile 945GME Express Integrated Graphics Controller rev 3, Mem @ 0xfe980000/524288, 0xd0000000/268435456, 0xfe940000/262144, I/O @ 0x0000dc80/8
    (--) PCI: (0:0:2:1) 8086:27a6:103c:361a Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xfe880000/524288
    (==) Using default built-in configuration (39 lines)
    (==) --- Start of built-in configuration ---
    Section "Device"
    Identifier "Builtin Default intel Device 0"
    Driver "intel"
    EndSection
    Section "Screen"
    Identifier "Builtin Default intel Screen 0"
    Device "Builtin Default intel Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default i810 Device 0"
    Driver "i810"
    EndSection
    Section "Screen"
    Identifier "Builtin Default i810 Screen 0"
    Device "Builtin Default i810 Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default vesa Device 0"
    Driver "vesa"
    EndSection
    Section "Screen"
    Identifier "Builtin Default vesa Screen 0"
    Device "Builtin Default vesa Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default fbdev Device 0"
    Driver "fbdev"
    EndSection
    Section "Screen"
    Identifier "Builtin Default fbdev Screen 0"
    Device "Builtin Default fbdev Device 0"
    EndSection
    Section "ServerLayout"
    Identifier "Builtin Default Layout"
    Screen "Builtin Default intel Screen 0"
    Screen "Builtin Default i810 Screen 0"
    Screen "Builtin Default vesa Screen 0"
    Screen "Builtin Default fbdev Screen 0"
    EndSection
    (==) --- End of built-in configuration ---
    (==) ServerLayout "Builtin Default Layout"
    (**) |-->Screen "Builtin Default intel Screen 0" (0)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default intel Device 0"
    (==) No monitor specified for screen "Builtin Default intel Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default i810 Screen 0" (1)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default i810 Device 0"
    (==) No monitor specified for screen "Builtin Default i810 Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default vesa Screen 0" (2)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default vesa Device 0"
    (==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default fbdev Screen 0" (3)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default fbdev Device 0"
    (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 2.7.99
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "i810"
    (WW) Warning, couldn't open module i810
    (II) UnloadModule: "i810"
    (EE) Failed to load module "i810" (module does not exist, 0)
    (II) LoadModule: "vesa"
    (II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
    (II) Module vesa: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.2.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "fbdev"
    (WW) Warning, couldn't open module fbdev
    (II) UnloadModule: "fbdev"
    (EE) Failed to load module "fbdev" (module does not exist, 0)
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
    965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
    IGDNG_M
    (II) VESA: driver for VESA chipsets: vesa
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (WW) Falling back to old probe method for vesa
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: drmOpenMinor returns 8
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) intel(0): Creating default Display subsection in Screen section
    "Builtin Default intel Screen 0" for depth/fbbpp 24/32
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
    (--) intel(0): Chipset: "945GME"
    (II) intel(0): Output VGA1 has no monitor section
    (II) intel(0): Output LVDS1 has no monitor section
    (II) intel(0): Output VGA1 disconnected
    (II) intel(0): Output LVDS1 connected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS1 using initial mode 1024x600
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (++) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) UnloadModule: "vesa"
    (II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) intel(0): [DRI2] Setup complete
    (**) intel(0): Kernel mode setting active, disabling FBC.
    (**) intel(0): Framebuffer compression disabled
    (**) intel(0): Tiling enabled
    (**) intel(0): SwapBuffers wait enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) UXA(0): Driver registered support for the following operations:
    (II) solid
    (II) copy
    (II) composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): No memory allocations
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder disabled
    (II) intel(0): Set up textured video
    (II) intel(0): direct rendering: DRI2 Enabled
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    (II) GLX: Initialized DRI2 GL provider for screen 0
    (II) intel(0): Setting screen physical size to 270 x 158
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "es"
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) Macintosh mouse button emulation: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.1.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) Synaptics touchpad driver version 1.1.2
    (**) Option "Device" "/dev/input/event4"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle
    (**) Option "VertEdgeScroll" "true"
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
    (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
    (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: Adding input device Sleep Button
    (**) Sleep Button: always reports core events
    (**) Sleep Button: Device: "/dev/input/event7"
    (II) Sleep Button: Found keys
    (II) Sleep Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "es"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event8"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "es"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event2"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "es"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event5"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "es"
    (II) intel(0): EDID vendor "CPT", prod id 1260
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1024x600"x0.0 45.60 1024 1072 1104 1216 600 603 609 625 -hsync -vsync (37.5 kHz)
    (II) intel(0): EDID vendor "CPT", prod id 1260
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1024x600"x0.0 45.60 1024 1072 1104 1216 600 603 609 625 -hsync -vsync (37.5 kHz)
    dmesg
    Linux version 2.6.30-ARCH (root@artin) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Mon Aug 17 18:04:53 CEST 2009
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    NSC Geode by NSC
    Cyrix CyrixInstead
    Centaur CentaurHauls
    Transmeta GenuineTMx86
    Transmeta TransmetaCPU
    UMC UMC UMC UMC
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000003f7b0000 (usable)
    BIOS-e820: 000000003f7b0000 - 000000003f7be000 (ACPI data)
    BIOS-e820: 000000003f7be000 - 000000003f7f0000 (ACPI NVS)
    BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    DMI present.
    last_pfn = 0x3f7b0 max_arch_pfn = 0x100000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-DFFFF uncachable
    E0000-E3FFF write-protect
    E4000-EFFFF write-through
    F0000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask 0C0000000 write-back
    1 base 03F800000 mask 0FF800000 uncachable
    2 disabled
    3 disabled
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000002000 (usable)
    modified: 0000000000002000 - 0000000000006000 (reserved)
    modified: 0000000000006000 - 000000000009fc00 (usable)
    modified: 000000000009fc00 - 00000000000a0000 (reserved)
    modified: 00000000000e0000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 000000003f7b0000 (usable)
    modified: 000000003f7b0000 - 000000003f7be000 (ACPI data)
    modified: 000000003f7be000 - 000000003f7f0000 (ACPI NVS)
    modified: 000000003f7f0000 - 000000003f800000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000fff00000 - 0000000100000000 (reserved)
    init_memory_mapping: 0000000000000000-00000000377fe000
    0000000000 - 0000400000 page 4k
    0000400000 - 0037400000 page 2M
    0037400000 - 00377fe000 page 4k
    kernel direct mapping tables up to 377fe000 @ 7000-c000
    RAMDISK: 3f6bb000 - 3f79f5e0
    Allocated new RAMDISK: 00628000 - 0070c5e0
    Move RAMDISK from 000000003f6bb000 - 000000003f79f5df to 00628000 - 0070c5df
    ACPI: RSDP 000f9c30 00014 (v00 ACPIAM)
    ACPI: RSDT 3f7b0000 0003C (v01 110708 RSDT1432 20081107 MSFT 00000097)
    ACPI: FACP 3f7b0200 00084 (v02 110708 FACP1432 20081107 MSFT 00000097)
    ACPI: DSDT 3f7b0430 07ECA (v01 361A0 361A0F05 00000F05 INTL 20051117)
    ACPI: FACS 3f7be000 00040
    ACPI: APIC 3f7b0390 0005C (v01 110708 APIC1432 20081107 MSFT 00000097)
    ACPI: MCFG 3f7b03f0 0003C (v01 110708 OEMMCFG 20081107 MSFT 00000097)
    ACPI: OEMB 3f7be040 00224 (v01 110708 OEMB1432 20081107 MSFT 00000097)
    ACPI: ASF! 3f7b8300 00075 (v32 LEGEND I865PASF 00000001 INTL 20051117)
    ACPI: SSDT 3f7bebe0 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
    ACPI: Local APIC address 0xfee00000
    127MB HIGHMEM available.
    887MB LOWMEM available.
    mapped low ram: 0 - 377fe000
    low ram: 0 - 377fe000
    node 0 low ram: 00000000 - 377fe000
    node 0 bootmap 00008000 - 0000ef00
    (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0000100000 - 0000624e44] TEXT DATA BSS ==> [0000100000 - 0000624e44]
    #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
    #5 [0000625000 - 0000627174] BRK ==> [0000625000 - 0000627174]
    #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
    #7 [0000628000 - 000070c5e0] NEW RAMDISK ==> [0000628000 - 000070c5e0]
    #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
    found SMP MP-table at [c00ff780] ff780
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    Normal 0x00001000 -> 0x000377fe
    HighMem 0x000377fe -> 0x0003f7b0
    Movable zone start PFN for each node
    early_node_map[3] active PFN ranges
    0: 0x00000000 -> 0x00000002
    0: 0x00000006 -> 0x0000009f
    0: 0x00000100 -> 0x0003f7b0
    On node 0 totalpages: 259915
    free_area_init_node: node 0, pgdat c04c0380, node_mem_map c1000000
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3963 pages, LIFO batch:0
    Normal zone: 1744 pages used for memmap
    Normal zone: 221486 pages, LIFO batch:31
    HighMem zone: 256 pages used for memmap
    HighMem zone: 32434 pages, LIFO batch:7
    Using APIC driver default
    ACPI: PM-Timer IO Port: 0x808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 0000000000002000 - 0000000000006000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Allocating PCI resources starting at 40000000 (gap: 3f800000:bf600000)
    NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 11 pages at c17f4000, static data 24444 bytes
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257883
    Kernel command line: root=/dev/disk/by-uuid/1cb71ec7-3bd0-4472-a3a0-3305ac4c68c3 ro resume=/dev/sda4 rootflags=barrier=0 elevator=as i915.modeset=1
    Unknown boot option `i915.modeset=1': ignoring
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    NR_IRQS:512
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Fast TSC calibration using PIT
    Detected 1595.895 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Initializing HighMem for node 0 (000377fe:0003f7b0)
    Memory: 1024080k/1040064k available (2894k kernel code, 15256k reserved, 1050k data, 392k init, 130760k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc04e1000 - 0xc0543000 ( 392 kB)
    .data : 0xc03d3aff - 0xc04da6a8 (1050 kB)
    .text : 0xc0100000 - 0xc03d3aff (2894 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.78 BogoMIPS (lpj=5319650)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 32K, L1 D cache: 24K
    CPU: L2 cache: 512K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    using mwait in idle threads.
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20090320
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
    Booting processor 1 APIC 0x1 ip 0x6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 3193.77 BogoMIPS (lpj=5319637)
    CPU: L1 I cache: 32K, L1 D cache: 24K
    CPU: L2 cache: 512K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    Total of 2 processors activated (6386.55 BogoMIPS).
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level SIBLING
    groups: 0 1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level SIBLING
    groups: 1 0
    net_namespace: 1056 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    PCI: Not using MMCONFIG.
    PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
    PCI: updated MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
    PCI: Using MMCONFIG for extended config space
    ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: No dock devices found.
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:02.0: reg 10 32bit mmio: [0xfe980000-0xfe9fffff]
    pci 0000:00:02.0: reg 14 io port: [0xdc80-0xdc87]
    pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
    pci 0000:00:02.0: reg 1c 32bit mmio: [0xfe940000-0xfe97ffff]
    pci 0000:00:02.1: reg 10 32bit mmio: [0xfe880000-0xfe8fffff]
    pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe938000-0xfe93bfff]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1d.0: reg 20 io port: [0xdc00-0xdc1f]
    pci 0000:00:1d.1: reg 20 io port: [0xd880-0xd89f]
    pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f]
    pci 0000:00:1d.3: reg 20 io port: [0xd480-0xd49f]
    pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe937c00-0xfe937fff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
    pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
    pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 0003)
    pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
    pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
    pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
    pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
    pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
    pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
    pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
    pci 0000:01:00.0: reg 10 64bit mmio: [0xfeafc000-0xfeafffff]
    pci 0000:01:00.0: supports D1 D2
    pci 0000:00:1c.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
    pci 0000:02:00.0: reg 10 64bit mmio: [0xfebfc000-0xfebfffff]
    pci 0000:02:00.0: reg 18 io port: [0xec00-0xecff]
    pci 0000:02:00.0: supports D1 D2
    pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:00.0: PME# disabled
    pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
    pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
    pci 0000:00:1e.0: transparent bridge
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    hpet clockevent registered
    HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 12 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
    system 00:08: ioport range 0x4d0-0x4d1 has been reserved
    system 00:08: ioport range 0x500-0x501 has been reserved
    system 00:08: ioport range 0x800-0x87f has been reserved
    system 00:08: ioport range 0x480-0x4bf has been reserved
    system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
    system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
    system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
    system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
    system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
    system 00:0a: iomem range 0xe0000000-0xe3ffffff has been reserved
    system 00:0b: iomem range 0x0-0x9ffff could not be reserved
    system 00:0b: iomem range 0xc0000-0xcffff could not be reserved
    system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
    system 00:0b: iomem range 0x100000-0x3f7fffff could not be reserved
    system 00:0b: iomem range 0xfed90000-0xffffffff could not be reserved
    pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:1c.0: IO window: disabled
    pci 0000:00:1c.0: MEM window: 0xfea00000-0xfeafffff
    pci 0000:00:1c.0: PREFETCH window: disabled
    pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
    pci 0000:00:1c.1: IO window: 0xe000-0xefff
    pci 0000:00:1c.1: MEM window: 0xfeb00000-0xfebfffff
    pci 0000:00:1c.1: PREFETCH window: disabled
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
    pci 0000:00:1e.0: IO window: disabled
    pci 0000:00:1e.0: MEM window: disabled
    pci 0000:00:1e.0: PREFETCH window: disabled
    pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff]
    pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
    pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
    pci_bus 0000:03: resource 3 io: [0x00-0xffff]
    pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs...
    Freeing initrd memory: 913k freed
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: disabled - APM is not SMP safe.
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1251638842.163:1): initialized
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1747
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered (default)
    io scheduler deadline registered
    io scheduler cfq registered
    pci 0000:00:02.0: Boot video device
    pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
    pcieport-driver 0000:00:1c.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
    pcieport-driver 0000:00:1c.1: setting latency timer to 64
    isapnp: Scanning for PnP cards...
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 0
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 392k freed
    Linux agpgart interface v0.103
    agpgart-intel 0000:00:00.0: Intel 945GME Chipset
    agpgart-intel 0000:00:00.0: detected 7932K stolen memory
    agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [drm] Initialized drm 1.1.0 20060810
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:18/input/input2
    ACPI: Video Device [IGD] (multi-head: yes rom: no post: no)
    i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    i915 0000:00:02.0: setting latency timer to 64
    allocated 1024x600 fb: 0x007df000, bo f7373300
    Console: switching to colour frame buffer device 128x37
    [drm] LVDS-8: set mode 1024x600 c
    fb0: inteldrmfb frame buffer device
    registered panic notifier
    [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    SCSI subsystem initialized
    libata version 3.00 loaded.
    pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    pata_acpi 0000:00:1f.1: setting latency timer to 64
    pata_acpi 0000:00:1f.1: PCI INT A disabled
    ata_piix 0000:00:1f.1: version 2.13
    ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    ata_piix 0000:00:1f.1: setting latency timer to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
    ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
    ata1.00: ATA-7: TOSHIBA MK6028GAL, BN101C, max UDMA/100
    ata1.00: 117210240 sectors, multi 16: LBA
    ata1.00: configured for UDMA/100
    scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6028GA BN10 PQ: 0 ANSI: 5
    ata2: port disabled. ignoring.
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 < sda5 sda6 > sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    PM: Starting manual resume from disk
    EXT4-fs: barriers disabled
    kjournald2 starting: pid 502, dev sda2:8, commit interval 5 seconds
    EXT4-fs: delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs: mounted filesystem sda2 with ordered data mode
    rtc_cmos 00:03: RTC can wake from S4
    rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
    udev: starting version 145
    ACPI: SSDT 3f7be340 0023C (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    ACPI: SSDT 3f7be610 005D0 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI_CPU:00: registered as cooling_device0
    ACPI: SSDT 3f7be270 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
    ACPI: SSDT 3f7be580 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI_CPU:01: registered as cooling_device1
    intel_rng: FWH not detected
    input: PC Speaker as /devices/platform/pcspkr/input/input3
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe937c00
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    sky2 driver version 1.22
    sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    sky2 0000:02:00.0: setting latency timer to 64
    sky2 0000:02:00.0: Yukon-2 FE+ chip revision 0
    sky2 0000:02:00.0: irq 26 for MSI/MSI-X
    sky2 eth0: addr 00:22:64:71:89:f7
    iTCO_vendor_support: vendor-support=0
    usb 1-4: new high speed USB device using ehci_hcd and address 3
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0860)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    usb 1-4: configuration #1 chosen from 1 choice
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000dc00
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.3: setting latency timer to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d480
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    lib80211: common routines for IEEE802.11 drivers
    lib80211_crypt: registered algorithm 'NULL'
    Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04711/0xa00000
    input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4
    usb 3-1: new full speed USB device using uhci_hcd and address 2
    usb 3-1: configuration #1 chosen from 1 choice
    wl: module license 'Mixed/Proprietary' taints kernel.
    Disabling lock debugging due to kernel taint
    wl 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    wl 0000:01:00.0: setting latency timer to 64
    eth1 (wl): not using net_device_ops yet
    ACPI: WMI: Mapper loaded
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    ACPI: Power Button [PWRF]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0D:00/input/input6
    ACPI: Lid Switch [LID]
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
    ACPI: Sleep Button [SLPB]
    input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input8
    ACPI: Power Button [PWRB]
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    ACPI: AC Adapter [AC0] (on-line)
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THRM] (37 C)
    ACPI: Battery Slot [BAT1] (battery present)
    lib80211_crypt: registered algorithm 'TKIP'
    eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.91.9
    fuse init (API version 7.11)
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
    input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input10
    input: HDA Intel Mic at Sep Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input11
    input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input12
    input: HDA Intel HP Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input13
    EXT4 FS on sda2, internal journal on sda2:8
    Adding 1975984k swap on /dev/sda4. Priority:-1 extents:1 across:1975984k
    platform microcode: firmware: requesting intel-ucode/06-1c-02
    platform microcode: firmware: requesting intel-ucode/06-1c-02
    Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    microcode: CPU0 updated from revision 0x20a to 0x212, date = 2008-10-06
    microcode: CPU1 updated from revision 0x20a to 0x212, date = 2008-10-06
    Microcode Update Driver: v2.00 removed.
    Clocksource tsc unstable (delta = -87068727 ns)
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    sky2 eth0: enabling interface
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    eth1: no IPv6 routers present
    CPU0 attaching NULL sched-domain.
    CPU1 attaching NULL sched-domain.
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level SIBLING
    groups: 0 1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level SIBLING
    groups: 1 0

  • Archlinux 2.6.27 on HP nc6000, bad performance

    Hello guys.
    I have a problem with performance on my laptop. I have tried several things but it didn't help. I'm using newest xorg, kernel, xfce and open ati drivers from arch repo. My graphic card is ati mobility 9600. I have noapi option on kernel load. The problem is that everything is working bit slowly. I was using modified slackware before and everything were fine with older versions of xorg, kernel and driver. So i think this is the problem.
    Here's my dmesg:
    [areiks@areiks ~]$ dmesg
    Linux version 2.6.27-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Mon Dec 8 22:01:01 UTC 2008
    PAT WC disabled due to known CPU erratum.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
    BIOS-e820: 000000001ffd0000 - 000000001fff0c00 (reserved)
    BIOS-e820: 000000001fff0c00 - 000000001fffc000 (ACPI NVS)
    BIOS-e820: 000000001fffc000 - 0000000020000000 (reserved)
    DMI 2.3 present.
    last_pfn = 0x1ffd0 max_arch_pfn = 0x100000
    kernel direct mapping tables up to 1ffd0000 @ 7000-d000
    RAMDISK: 1ff26000 - 1ffbf85d
    ACPI: RSDP 000FDF80, 0014 (r0 COMPAQ)
    ACPI: RSDT 1FFF0C84, 002C (r1 HP HP0890 22110420 CPQ 1)
    ACPI: FACP 1FFF0C00, 0084 (r2 HP HP0890 2 CPQ 1)
    ACPI: DSDT 1FFF0CB0, 6DF6 (r1 HP nc6000 10000 MSFT 100000E)
    ACPI: FACS 1FFFBE80, 0040
    ACPI: SSDT 1FFF7AA6, 028A (r1 COMPAQ CPQGysr 1001 MSFT 100000E)
    ACPI: DMI detected: Hewlett-Packard
    0MB HIGHMEM available.
    511MB LOWMEM available.
    mapped low ram: 0 - 1ffd0000
    low ram: 00000000 - 1ffd0000
    bootmap 00002000 - 00005ffc
    (9 early reservations) ==> bootmem [0000000000 - 001ffd0000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0000100000 - 000050c240] TEXT DATA BSS ==> [0000100000 - 000050c240]
    #4 [001ff26000 - 001ffbf85d] RAMDISK ==> [001ff26000 - 001ffbf85d]
    #5 [000050d000 - 0000510000] INIT_PG_TABLE ==> [000050d000 - 0000510000]
    #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
    #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
    #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    Normal 0x00001000 -> 0x0001ffd0
    HighMem 0x0001ffd0 -> 0x0001ffd0
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0001ffd0
    On node 0 totalpages: 130927
    free_area_init_node: node 0, pgdat c03d9300, node_mem_map c1000000
    DMA zone: 3967 pages, LIFO batch:0
    Normal zone: 125936 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    SMP: Allowing 1 CPUs, 0 hotplug CPUs
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffb000 (01402000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000)
    PERCPU: Allocating 39324 bytes of per cpu data
    NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129903
    Kernel command line: root=/dev/disk/by-uuid/20b154b6-c555-48a5-a9ee-d2b8dab17289 ro vga=790 noapic
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    TSC: PIT calibration confirmed by PMTIMER.
    TSC: using PIT calibration value
    Detected 1594.822 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 514196k/524096k available (2153k kernel code, 9360k reserved, 843k data, 288k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
    lowmem : 0xc0000000 - 0xdffd0000 ( 511 MB)
    .init : 0xc03f3000 - 0xc043b000 ( 288 kB)
    .data : 0xc031a4c6 - 0xc03ed320 ( 843 kB)
    .text : 0xc0100000 - 0xc031a4c6 (2153 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3190.54 BogoMIPS (lpj=5316073)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20080609
    ACPI: Checking initramfs for custom DSDT
    ACPI: setting ELCR to 0200 (from 0c00)
    weird, boot CPU (#0) not listedby the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (3190.54 BogoMIPS).
    net_namespace: 832 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=5
    PCI: Using configuration type 1 for base access
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [C044] (0000:00)
    PCI: 0000:00:00.0 reg 10 32bit mmio: [b0000000, bfffffff]
    PCI: 0000:00:1d.0 reg 20 io port: [38c0, 38df]
    PCI: 0000:00:1d.1 reg 20 io port: [38e0, 38ff]
    PCI: 0000:00:1d.2 reg 20 io port: [3c00, 3c1f]
    PCI: 0000:00:1d.7 reg 10 32bit mmio: [a0000000, a00003ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    HPET not enabled in BIOS. You might try hpet=force boot option
    pci 0000:00:1f.0: Enabled i801 SMBus device
    pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH4 GPIO
    PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
    PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
    PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
    PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
    PCI: 0000:00:1f.1 reg 20 io port: [3c20, 3c2f]
    PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff]
    PCI: 0000:00:1f.3 reg 20 io port: [1200, 121f]
    PCI: 0000:00:1f.5 reg 10 io port: [3000, 30ff]
    PCI: 0000:00:1f.5 reg 14 io port: [3880, 38bf]
    PCI: 0000:00:1f.5 reg 18 32bit mmio: [a0100000, a01001ff]
    PCI: 0000:00:1f.5 reg 1c 32bit mmio: [a0180000, a01800ff]
    pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
    pci 0000:00:1f.5: PME# disabled
    PCI: 0000:00:1f.6 reg 10 io port: [3400, 34ff]
    PCI: 0000:00:1f.6 reg 14 io port: [3800, 387f]
    pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
    pci 0000:00:1f.6: PME# disabled
    PCI: 0000:01:00.0 reg 10 32bit mmio: [98000000, 9fffffff]
    PCI: 0000:01:00.0 reg 14 io port: [2000, 20ff]
    PCI: 0000:01:00.0 reg 18 32bit mmio: [90300000, 9030ffff]
    PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
    pci 0000:01:00.0: supports D1
    pci 0000:01:00.0: supports D2
    PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
    PCI: bridge 0000:00:01.0 32bit mmio: [90300000, 903fffff]
    PCI: bridge 0000:00:01.0 32bit mmio pref: [98000000, 9fffffff]
    PCI: 0000:02:06.0 reg 10 32bit mmio: [90080000, 90080fff]
    pci 0000:02:06.0: supports D1
    pci 0000:02:06.0: supports D2
    pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:06.0: PME# disabled
    PCI: 0000:02:06.1 reg 10 32bit mmio: [90100000, 90100fff]
    pci 0000:02:06.1: supports D1
    pci 0000:02:06.1: supports D2
    pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:06.1: PME# disabled
    PCI: 0000:02:06.2 reg 10 32bit mmio: [90180000, 90180fff]
    pci 0000:02:06.2: supports D1
    pci 0000:02:06.2: supports D2
    pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:06.2: PME# disabled
    PCI: 0000:02:06.3 reg 10 32bit mmio: [90200000, 90200fff]
    pci 0000:02:06.3: supports D1
    pci 0000:02:06.3: supports D2
    pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:06.3: PME# disabled
    PCI: 0000:02:0e.0 reg 10 64bit mmio: [90000000, 9000ffff]
    PCI: 0000:02:0e.0 reg 30 32bit mmio: [0, ffff]
    pci 0000:02:0e.0: PME# supported from D3hot D3cold
    pci 0000:02:0e.0: PME# disabled
    pci 0000:00:1e.0: transparent bridge
    PCI: bridge 0000:00:1e.0 32bit mmio: [90000000, 902fffff]
    bus 00 -> node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.C044._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.C044.C045._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.C044.C056._PRT]
    ACPI: PCI Interrupt Link [C0C1] (IRQs *10 11)
    ACPI: PCI Interrupt Link [C0C2] (IRQs 10 *11)
    ACPI: PCI Interrupt Link [C0C3] (IRQs *10 11)
    ACPI: PCI Interrupt Link [C0C4] (IRQs *10 11)
    ACPI: PCI Interrupt Link [C0C5] (IRQs 10 *11)
    ACPI: PCI Interrupt Link [C0C6] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [C0C7] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [C0C8] (IRQs *10 11)
    ACPI: Power Resource [C16D] (on)
    ACPI: Power Resource [C184] (on)
    ACPI: Power Resource [C18B] (on)
    ACPI: Power Resource [C195] (on)
    ACPI: Power Resource [C0E6] (on)
    ACPI: Power Resource [C20B] (off)
    ACPI: Power Resource [C20C] (off)
    ACPI: Power Resource [C20D] (off)
    ACPI: Power Resource [C20E] (off)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:00: iomem range 0x0-0x9ffff could not be reserved
    system 00:00: iomem range 0xe0000-0xfffff could not be reserved
    system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
    system 00:0c: ioport range 0x140-0x14f has been reserved
    system 00:0c: iomem range 0xffb00000-0xffbfffff has been reserved
    system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
    system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
    system 00:0d: ioport range 0x1000-0x107f has been reserved
    system 00:0d: ioport range 0x1100-0x113f has been reserved
    system 00:0d: ioport range 0x1200-0x121f has been reserved
    system 00:0d: iomem range 0xfec00000-0xfec000ff has been reserved
    system 00:0e: iomem range 0xd3000-0xd3fff has been reserved
    system 00:0e: iomem range 0xfec01000-0xfec01fff has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x2000-0x2fff
    pci 0000:00:01.0: MEM window: 0x90300000-0x903fffff
    pci 0000:00:01.0: PREFETCH window: 0x00000098000000-0x0000009fffffff
    pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03
    pci 0000:02:06.0: IO window: 0x004000-0x0040ff
    pci 0000:02:06.0: IO window: 0x004400-0x0044ff
    pci 0000:02:06.0: PREFETCH window: 0x30000000-0x33ffffff
    pci 0000:02:06.0: MEM window: 0x40000000-0x43ffffff
    pci 0000:02:06.1: CardBus bridge, secondary bus 0000:05
    pci 0000:02:06.1: IO window: 0x004800-0x0048ff
    pci 0000:02:06.1: IO window: 0x004c00-0x004cff
    pci 0000:02:06.1: PREFETCH window: 0x34000000-0x37ffffff
    pci 0000:02:06.1: MEM window: 0x44000000-0x47ffffff
    pci 0000:02:06.3: CardBus bridge, secondary bus 0000:09
    pci 0000:02:06.3: IO window: 0x005000-0x0050ff
    pci 0000:02:06.3: IO window: 0x005400-0x0054ff
    pci 0000:02:06.3: PREFETCH window: 0x38000000-0x3bffffff
    pci 0000:02:06.3: MEM window: 0x48000000-0x4bffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:1e.0: IO window: 0x4000-0x5fff
    pci 0000:00:1e.0: MEM window: 0x90000000-0x902fffff
    pci 0000:00:1e.0: PREFETCH window: 0x00000030000000-0x0000003dffffff
    pci 0000:00:1e.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    pci 0000:02:06.0: PCI INT A -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
    pci 0000:02:06.1: PCI INT A -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
    pci 0000:02:06.3: PCI INT A -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
    bus: 00 index 0 io port: [0, ffff]
    bus: 00 index 1 mmio: [0, ffffffff]
    bus: 01 index 0 io port: [2000, 2fff]
    bus: 01 index 1 mmio: [90300000, 903fffff]
    bus: 01 index 2 mmio: [98000000, 9fffffff]
    bus: 01 index 3 mmio: [0, 0]
    bus: 02 index 0 io port: [4000, 5fff]
    bus: 02 index 1 mmio: [90000000, 902fffff]
    bus: 02 index 2 mmio: [30000000, 3dffffff]
    bus: 02 index 3 io port: [0, ffff]
    bus: 02 index 4 mmio: [0, ffffffff]
    bus: 03 index 0 io port: [4000, 40ff]
    bus: 03 index 1 io port: [4400, 44ff]
    bus: 03 index 2 mmio: [30000000, 33ffffff]
    bus: 03 index 3 mmio: [40000000, 43ffffff]
    bus: 05 index 0 io port: [4800, 48ff]
    bus: 05 index 1 io port: [4c00, 4cff]
    bus: 05 index 2 mmio: [34000000, 37ffffff]
    bus: 05 index 3 mmio: [44000000, 47ffffff]
    bus: 09 index 0 io port: [5000, 50ff]
    bus: 09 index 1 io port: [5400, 54ff]
    bus: 09 index 2 mmio: [38000000, 3bffffff]
    bus: 09 index 3 mmio: [48000000, 4bffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 614k freed
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1005
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:01:00.0: Boot video device
    vesafb: framebuffer at 0x98000000, mapped to 0xe0880000, using 3072k, total 32704k
    vesafb: mode is 1024x768x16, linelength=2048, pages=20
    vesafb: protected mode interface info at c000:59e9
    vesafb: pmi: set display start = c00c5a57, set palette = c00c5a91
    vesafb: pmi: ports = 2010 2016 2054 2038 203c 205c 2000 2004 20b0 20b2 20b4
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:5:5, shift=0:10:5:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
    00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    serial 0000:00:1f.6: PCI INT B -> Link[C0C2] -> GSI 11 (level, low) -> IRQ 11
    serial 0000:00:1f.6: PCI INT B disabled
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:C192,PNP0f13:C193] at 0x60,0x64 irq 1,12
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 288k freed
    input: AT Translated Set 2 keyboard as /class/input/input1
    Uniform Multi-Platform E-IDE driver
    piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x03)
    PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007)
    PIIX_IDE 0000:00:1f.1: PCI INT A -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
    piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x3c20-0x3c27
    ide1: BM-DMA at 0x3c28-0x3c2f
    Switched to high resolution mode on CPU 0
    Probing IDE interface ide0...
    hda: HTS548040M9AT00, ATA DISK drive
    hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
    hda: UDMA/100 mode selected
    Probing IDE interface ide1...
    hdc: SD-R2512, ATAPI CD/DVD-ROM drive
    hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
    hdc: MWDMA2 mode selected
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    ide1 at 0x170-0x177,0x376 on irq 15
    SCSI subsystem initialized
    No dock devices found.
    libata version 3.00 loaded.
    hda: max request size: 512KiB
    hda: 78140160 sectors (40007 MB) w/7877KiB Cache, CHS=16383/255/63
    hda: cache flushes supported
    hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
    hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
    Uniform CD-ROM driver Revision: 3.20
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    tg3.c:v3.94 (August 14, 2008)
    ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 11
    tg3 0000:02:0e.0: PCI INT A -> Link[C0C5] -> GSI 11 (level, low) -> IRQ 11
    eth0: Tigon3 [partno(BMC5705mA3) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:12:79:57:11:bd
    eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
    eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
    Intel ICH 0000:00:1f.5: power state changed by ACPI to D0
    Intel ICH 0000:00:1f.5: PCI INT B -> Link[C0C2] -> GSI 11 (level, low) -> IRQ 11
    Intel ICH 0000:00:1f.5: setting latency timer to 64
    intel8x0_measure_ac97_clock: measured 52750 usecs
    intel8x0: clocking to 48000
    Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[C0C2] -> GSI 11 (level, low) -> IRQ 11
    Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
    p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
    p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    usbcore: registered new interface driver zd1211rw
    ACPI: AC Adapter [C134] (on-line)
    ACPI: Battery Slot [C137] (battery present)
    ACPI: Battery Slot [C136] (battery absent)
    input: Power Button (FF) as /class/input/input2
    ACPI: Power Button (FF) [PWRF]
    input: Sleep Button (CM) as /class/input/input3
    ACPI: Sleep Button (CM) [C139]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [C138]
    ACPI: Transitioning device [C20F] to D3
    fan PNP0C0B:00: registered as cooling_device0
    ACPI: Fan [C20F] (off)
    ACPI: Transitioning device [C210] to D3
    fan PNP0C0B:01: registered as cooling_device1
    ACPI: Fan [C210] (off)
    ACPI: Transitioning device [C211] to D3
    fan PNP0C0B:02: registered as cooling_device2
    ACPI: Fan [C211] (off)
    ACPI: Transitioning device [C212] to D3
    fan PNP0C0B:03: registered as cooling_device3
    ACPI: Fan [C212] (off)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI0007:00: registered as cooling_device4
    ACPI: Processor [CPU0] (supports 8 throttling states)
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [TZ1] (64 C)
    thermal LNXTHERM:02: registered as thermal_zone1
    ACPI: Thermal Zone [TZ2] (48 C)
    thermal LNXTHERM:03: registered as thermal_zone2
    ACPI: Thermal Zone [TZ3] (31 C)
    Marking TSC unstable due to TSC halts in idle
    Linux agpgart interface v0.103
    agpgart-intel 0000:00:00.0: Intel 855PM Chipset
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt Link [C0C1] enabled at IRQ 10
    uhci_hcd 0000:00:1d.0: PCI INT A -> Link[C0C1] -> GSI 10 (level, low) -> IRQ 10
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1d.0: irq 10, io base 0x000038c0
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
    iTCO_vendor_support: vendor-support=0
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
    iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    intel_rng: FWH not detected
    ACPI: WMI: Mapper loaded
    ACPI: PCI Interrupt Link [C0C8] enabled at IRQ 10
    ehci_hcd 0000:00:1d.7: PCI INT D -> Link[C0C8] -> GSI 10 (level, low) -> IRQ 10
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: irq 10, io mem 0xa0000000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 10
    uhci_hcd 0000:00:1d.1: PCI INT B -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 10, io base 0x000038e0
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 10, io base 0x00003c00
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    usb 2-2: new high speed USB device using ehci_hcd and address 2
    input: Video Bus as /class/input/input5
    usb 2-2: configuration #1 chosen from 1 choice
    ACPI: Video Device [C0CF] (multi-head: yes rom: no post: no)
    usb 2-2: reset high speed USB device using ehci_hcd and address 2
    tpm_inf_pnp 00:0b: Found C197 with ID IFX0101
    tpm_inf_pnp 00:0b: TPM found: config base 0xe0, data base 0x1400, chip version 0x0006, vendor id 0x15d1 (Infineon), product id 0x0006 (SLD 9630 TT 1.1)
    phy0: Selected rate control algorithm 'pid'
    i801_smbus 0000:00:1f.3: PCI INT B -> Link[C0C2] -> GSI 11 (level, low) -> IRQ 11
    ACPI: I/O resource 0000:00:1f.3 [0x1200-0x121f] conflicts with ACPI region C087 [0x1200-0x1205]
    ACPI: Device needs an ACPI driver
    Yenta: CardBus bridge found at 0000:02:06.0 [103c:0890]
    Yenta O2: res at 0x94/0xD4: ea/00
    Yenta O2: enabling read prefetch/write burst
    parport_pc 00:04: reported by Plug and Play ACPI
    parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
    zd1211rw 2-2:1.0: phy0
    Yenta: ISA IRQ mask 0x0038, PCI irq 10
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff
    cs: IO port probe 0x4000-0x5fff: clean.
    pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x902fffff
    pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x3dffffff
    Yenta: CardBus bridge found at 0000:02:06.1 [103c:0890]
    Yenta: ISA IRQ mask 0x0038, PCI irq 10
    Socket status: 30000006
    Yenta: Raising subordinate bus# of parent bus (#02) from #05 to #08
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff
    cs: IO port probe 0x4000-0x5fff: clean.
    pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x902fffff
    pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x3dffffff
    Yenta: CardBus bridge found at 0000:02:06.3 [103c:0890]
    Yenta: ISA IRQ mask 0x0038, PCI irq 10
    Socket status: 30000006
    Yenta: Raising subordinate bus# of parent bus (#02) from #08 to #0c
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff
    cs: IO port probe 0x4000-0x5fff: clean.
    pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x902fffff
    pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x3dffffff
    input: PC Speaker as /class/input/input6
    NET: Registered protocol family 23
    lp0: using parport0 (interrupt-driven).
    Error: Driver 'pcspkr' is already registered, aborting...
    ppdev: user-space parallel port driver
    Synaptics Touchpad, model: 1, fw: 5.9, id: 0x1b6eb1, caps: 0xa84793/0x100000
    serio: Synaptics pass-through port at isa0060/serio4/input0
    input: SynPS/2 Synaptics TouchPad as /class/input/input7
    Detected unconfigured HP nc6000 family SMSC IrDA chip, pre-configuring device.
    Setting up Intel 82801 controller and SMSC device
    found SMC SuperIO Chip (devid=0x5a rev=00 base=0x004e): LPC47N227
    smsc_superio_flat(): fir: 0x130, sir: 0x2f8, dma: 03, irq: 5, mode: 0x0e
    SMsC IrDA Controller found
    IrCC version 2.0, firport 0x130, sirport 0x2f8 dma=3, irq=5
    No transceiver found. Defaulting to Fast pin select
    IrDA: Registered device irda0
    Error: Driver 'pcspkr' is already registered, aborting...
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: clean.
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: clean.
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: clean.
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    Clocksource tsc unstable (delta = -338066707 ns)
    EXT3 FS on hda6, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on hda7, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    fuse init (API version 7.9)
    FAT: Unrecognized mount option "locale=pl_PL.utf8" or missing value
    Adding 522072k swap on /dev/hda8. Priority:-1 extents:1 across:522072k
    input: PS/2 Generic Mouse as /class/input/input8
    pci 0000:01:00.0: PCI INT A -> Link[C0C1] -> GSI 10 (level, low) -> IRQ 10
    [drm] Initialized drm 1.1.0 20060810
    [drm] Initialized radeon 1.29.0 20080528 on minor 0
    agpgart-intel 0000:00:00.0: AGP 2.0 bridge
    agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
    pci 0000:01:00.0: putting AGP V2 device into 4x mode
    [drm] Setting GART location based on new memory map
    [drm] Loading R300 Microcode
    [drm] Num pipes: 1
    [drm] writeback test succeeded in 0 usecs
    firmware: requesting zd1211/zd1211b_ub
    firmware: requesting zd1211/zd1211b_uphr
    zd1211rw 2-2:1.0: firmware version 4725
    zd1211rw 2-2:1.0: zd1211b chip 079b:0062 v4810 high 00-60-b3 AL2230_RF pa0 g---S
    wlan0: authenticate with AP 00:16:41:f1:45:03
    wlan0: authenticated
    wlan0: associate with AP 00:16:41:f1:45:03
    wlan0: RX AssocResp from 00:16:41:f1:45:03 (capab=0x401 status=0 aid=1)
    wlan0: associated
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    wlan0: no IPv6 routers present
    and lsmod:
    bash-3.2# lsmod
    Module Size Used by
    ipv6 260132 8
    radeon 144416 2
    drm 74280 3 radeon
    vfat 12800 0
    fat 49312 1 vfat
    fuse 52892 2
    joydev 11584 0
    pcmcia 35116 0
    irtty_sir 7040 0
    sir_dev 13316 1 irtty_sir
    ppdev 9348 0
    lp 11108 0
    smsc_ircc2 16672 0
    irda 112568 2 sir_dev,smsc_ircc2
    crc_ccitt 3840 1 irda
    snd_pcsp 11040 0
    psmouse 38288 0
    serio_raw 7172 0
    arc4 3712 2
    parport_pc 36804 1
    parport 33004 3 ppdev,lp,parport_pc
    yenta_socket 25228 3
    rsrc_nonstatic 12672 1 yenta_socket
    ecb 4608 2
    crypto_blkcipher 17540 1 ecb
    pcmcia_core 33812 3 pcmcia,yenta_socket,rsrc_nonstatic
    i2c_i801 10768 0
    i2c_core 22420 1 i2c_i801
    container 5248 0
    tpm_infineon 10664 0
    tpm 14656 1 tpm_infineon
    tpm_bios 7680 1 tpm
    video 18064 0
    output 4608 1 video
    wmi 7592 0
    iTCO_wdt 12196 0
    iTCO_vendor_support 4996 1 iTCO_wdt
    ehci_hcd 36236 0
    uhci_hcd 24080 0
    shpchp 31380 0
    pci_hotplug 28064 1 shpchp
    intel_agp 27068 1
    agpgart 30804 2 drm,intel_agp
    thermal 17052 0
    evdev 11296 11
    processor 34732 2 thermal
    fan 6148 0
    button 7824 0
    battery 12036 0
    ac 6020 0
    zd1211rw 46724 0
    usbcore 134384 4 ehci_hcd,uhci_hcd,zd1211rw
    mac80211 158876 1 zd1211rw
    cfg80211 25224 1 mac80211
    cpufreq_ondemand 8588 1
    p4_clockmod 6084 0
    speedstep_lib 6148 1 p4_clockmod
    freq_table 5632 2 cpufreq_ondemand,p4_clockmod
    snd_intel8x0m 15500 0
    snd_intel8x0 30748 4
    snd_seq_oss 31872 0
    snd_ac97_codec 100516 2 snd_intel8x0m,snd_intel8x0
    snd_seq_midi_event 8192 1 snd_seq_oss
    snd_seq 49968 4 snd_seq_oss,snd_seq_midi_event
    snd_seq_device 8332 2 snd_seq_oss,snd_seq
    snd_pcm_oss 40192 0
    snd_pcm 69636 6 snd_pcsp,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
    snd_timer 21384 3 snd_seq,snd_pcm
    snd_page_alloc 9224 3 snd_intel8x0m,snd_intel8x0,snd_pcm
    snd_mixer_oss 16512 1 snd_pcm_oss
    snd 50724 17 snd_pcsp,snd_intel8x0m,snd_intel8x0,snd_seq_oss,snd_ac97_codec,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
    soundcore 8160 1 snd
    ac97_bus 3584 1 snd_ac97_codec
    tg3 121604 0
    libphy 18048 1 tg3
    rtc_cmos 11424 0
    rtc_core 17564 1 rtc_cmos
    rtc_lib 4480 1 rtc_core
    ext3 126344 2
    jbd 46228 1 ext3
    mbcache 8708 1 ext3
    ide_cd_mod 32900 0
    cdrom 35360 1 ide_cd_mod
    ide_disk 14336 5
    ata_piix 18308 0
    libata 153504 1 ata_piix
    dock 9616 1 libata
    scsi_mod 96460 1 libata
    piix 8072 4
    ide_pci_generic 5636 0
    ide_core 96200 4 ide_cd_mod,ide_disk,piix,ide_pci_generic
    Any ideas? Maybe somone has this notebook? Maybe its driver problem? But in glxgears i have about 1,1k FPS and also i have direct rendering. 
    I wish you could help me. Thanks anyway.
    Last edited by areiks (2008-12-21 21:46:46)

    Hello guys.
    I have a problem with performance on my laptop. I have tried several things but it didn't help. I'm using newest xorg, kernel, xfce and open ati drivers from arch repo. My graphic card is ati mobility 9600. I have noapi option on kernel load. The problem is that everything is working bit slowly. I was using modified slackware before and everything were fine with older versions of xorg, kernel and driver. So i think this is the problem.
    Here's my dmesg:
    [areiks@areiks ~]$ dmesg
    Linux version 2.6.27-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Mon Dec 8 22:01:01 UTC 2008
    PAT WC disabled due to known CPU erratum.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
    BIOS-e820: 000000001ffd0000 - 000000001fff0c00 (reserved)
    BIOS-e820: 000000001fff0c00 - 000000001fffc000 (ACPI NVS)
    BIOS-e820: 000000001fffc000 - 0000000020000000 (reserved)
    DMI 2.3 present.
    last_pfn = 0x1ffd0 max_arch_pfn = 0x100000
    kernel direct mapping tables up to 1ffd0000 @ 7000-d000
    RAMDISK: 1ff26000 - 1ffbf85d
    ACPI: RSDP 000FDF80, 0014 (r0 COMPAQ)
    ACPI: RSDT 1FFF0C84, 002C (r1 HP HP0890 22110420 CPQ 1)
    ACPI: FACP 1FFF0C00, 0084 (r2 HP HP0890 2 CPQ 1)
    ACPI: DSDT 1FFF0CB0, 6DF6 (r1 HP nc6000 10000 MSFT 100000E)
    ACPI: FACS 1FFFBE80, 0040
    ACPI: SSDT 1FFF7AA6, 028A (r1 COMPAQ CPQGysr 1001 MSFT 100000E)
    ACPI: DMI detected: Hewlett-Packard
    0MB HIGHMEM available.
    511MB LOWMEM available.
    mapped low ram: 0 - 1ffd0000
    low ram: 00000000 - 1ffd0000
    bootmap 00002000 - 00005ffc
    (9 early reservations) ==> bootmem [0000000000 - 001ffd0000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0000100000 - 000050c240] TEXT DATA BSS ==> [0000100000 - 000050c240]
    #4 [001ff26000 - 001ffbf85d] RAMDISK ==> [001ff26000 - 001ffbf85d]
    #5 [000050d000 - 0000510000] INIT_PG_TABLE ==> [000050d000 - 0000510000]
    #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
    #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
    #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    Normal 0x00001000 -> 0x0001ffd0
    HighMem 0x0001ffd0 -> 0x0001ffd0
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0001ffd0
    On node 0 totalpages: 130927
    free_area_init_node: node 0, pgdat c03d9300, node_mem_map c1000000
    DMA zone: 3967 pages, LIFO batch:0
    Normal zone: 125936 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    SMP: Allowing 1 CPUs, 0 hotplug CPUs
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffb000 (01402000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000)
    PERCPU: Allocating 39324 bytes of per cpu data
    NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129903
    Kernel command line: root=/dev/disk/by-uuid/20b154b6-c555-48a5-a9ee-d2b8dab17289 ro vga=790 noapic
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    TSC: PIT calibration confirmed by PMTIMER.
    TSC: using PIT calibration value
    Detected 1594.822 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 514196k/524096k available (2153k kernel code, 9360k reserved, 843k data, 288k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
    lowmem : 0xc0000000 - 0xdffd0000 ( 511 MB)
    .init : 0xc03f3000 - 0xc043b000 ( 288 kB)
    .data : 0xc031a4c6 - 0xc03ed320 ( 843 kB)
    .text : 0xc0100000 - 0xc031a4c6 (2153 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3190.54 BogoMIPS (lpj=5316073)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20080609
    ACPI: Checking initramfs for custom DSDT
    ACPI: setting ELCR to 0200 (from 0c00)
    weird, boot CPU (#0) not listedby the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (3190.54 BogoMIPS).
    net_namespace: 832 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=5
    PCI: Using configuration type 1 for base access
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [C044] (0000:00)
    PCI: 0000:00:00.0 reg 10 32bit mmio: [b0000000, bfffffff]
    PCI: 0000:00:1d.0 reg 20 io port: [38c0, 38df]
    PCI: 0000:00:1d.1 reg 20 io port: [38e0, 38ff]
    PCI: 0000:00:1d.2 reg 20 io port: [3c00, 3c1f]
    PCI: 0000:00:1d.7 reg 10 32bit mmio: [a0000000, a00003ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    HPET not enabled in BIOS. You might try hpet=force boot option
    pci 0000:00:1f.0: Enabled i801 SMBus device
    pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH4 GPIO
    PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
    PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
    PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
    PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
    PCI: 0000:00:1f.1 reg 20 io port: [3c20, 3c2f]
    PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff]
    PCI: 0000:00:1f.3 reg 20 io port: [1200, 121f]
    PCI: 0000:00:1f.5 reg 10 io port: [3000, 30ff]
    PCI: 0000:00:1f.5 reg 14 io port: [3880, 38bf]
    PCI: 0000:00:1f.5 reg 18 32bit mmio: [a0100000, a01001ff]
    PCI: 0000:00:1f.5 reg 1c 32bit mmio: [a0180000, a01800ff]
    pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
    pci 0000:00:1f.5: PME# disabled
    PCI: 0000:00:1f.6 reg 10 io port: [3400, 34ff]
    PCI: 0000:00:1f.6 reg 14 io port: [3800, 387f]
    pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
    pci 0000:00:1f.6: PME# disabled
    PCI: 0000:01:00.0 reg 10 32bit mmio: [98000000, 9fffffff]
    PCI: 0000:01:00.0 reg 14 io port: [2000, 20ff]
    PCI: 0000:01:00.0 reg 18 32bit mmio: [90300000, 9030ffff]
    PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
    pci 0000:01:00.0: supports D1
    pci 0000:01:00.0: supports D2
    PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
    PCI: bridge 0000:00:01.0 32bit mmio: [90300000, 903fffff]
    PCI: bridge 0000:00:01.0 32bit mmio pref: [98000000, 9fffffff]
    PCI: 0000:02:06.0 reg 10 32bit mmio: [90080000, 90080fff]
    pci 0000:02:06.0: supports D1
    pci 0000:02:06.0: supports D2
    pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:06.0: PME# disabled
    PCI: 0000:02:06.1 reg 10 32bit mmio: [90100000, 90100fff]
    pci 0000:02:06.1: supports D1
    pci 0000:02:06.1: supports D2
    pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:06.1: PME# disabled
    PCI: 0000:02:06.2 reg 10 32bit mmio: [90180000, 90180fff]
    pci 0000:02:06.2: supports D1
    pci 0000:02:06.2: supports D2
    pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:06.2: PME# disabled
    PCI: 0000:02:06.3 reg 10 32bit mmio: [90200000, 90200fff]
    pci 0000:02:06.3: supports D1
    pci 0000:02:06.3: supports D2
    pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:06.3: PME# disabled
    PCI: 0000:02:0e.0 reg 10 64bit mmio: [90000000, 9000ffff]
    PCI: 0000:02:0e.0 reg 30 32bit mmio: [0, ffff]
    pci 0000:02:0e.0: PME# supported from D3hot D3cold
    pci 0000:02:0e.0: PME# disabled
    pci 0000:00:1e.0: transparent bridge
    PCI: bridge 0000:00:1e.0 32bit mmio: [90000000, 902fffff]
    bus 00 -> node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.C044._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.C044.C045._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.C044.C056._PRT]
    ACPI: PCI Interrupt Link [C0C1] (IRQs *10 11)
    ACPI: PCI Interrupt Link [C0C2] (IRQs 10 *11)
    ACPI: PCI Interrupt Link [C0C3] (IRQs *10 11)
    ACPI: PCI Interrupt Link [C0C4] (IRQs *10 11)
    ACPI: PCI Interrupt Link [C0C5] (IRQs 10 *11)
    ACPI: PCI Interrupt Link [C0C6] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [C0C7] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [C0C8] (IRQs *10 11)
    ACPI: Power Resource [C16D] (on)
    ACPI: Power Resource [C184] (on)
    ACPI: Power Resource [C18B] (on)
    ACPI: Power Resource [C195] (on)
    ACPI: Power Resource [C0E6] (on)
    ACPI: Power Resource [C20B] (off)
    ACPI: Power Resource [C20C] (off)
    ACPI: Power Resource [C20D] (off)
    ACPI: Power Resource [C20E] (off)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:00: iomem range 0x0-0x9ffff could not be reserved
    system 00:00: iomem range 0xe0000-0xfffff could not be reserved
    system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
    system 00:0c: ioport range 0x140-0x14f has been reserved
    system 00:0c: iomem range 0xffb00000-0xffbfffff has been reserved
    system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
    system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
    system 00:0d: ioport range 0x1000-0x107f has been reserved
    system 00:0d: ioport range 0x1100-0x113f has been reserved
    system 00:0d: ioport range 0x1200-0x121f has been reserved
    system 00:0d: iomem range 0xfec00000-0xfec000ff has been reserved
    system 00:0e: iomem range 0xd3000-0xd3fff has been reserved
    system 00:0e: iomem range 0xfec01000-0xfec01fff has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x2000-0x2fff
    pci 0000:00:01.0: MEM window: 0x90300000-0x903fffff
    pci 0000:00:01.0: PREFETCH window: 0x00000098000000-0x0000009fffffff
    pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03
    pci 0000:02:06.0: IO window: 0x004000-0x0040ff
    pci 0000:02:06.0: IO window: 0x004400-0x0044ff
    pci 0000:02:06.0: PREFETCH window: 0x30000000-0x33ffffff
    pci 0000:02:06.0: MEM window: 0x40000000-0x43ffffff
    pci 0000:02:06.1: CardBus bridge, secondary bus 0000:05
    pci 0000:02:06.1: IO window: 0x004800-0x0048ff
    pci 0000:02:06.1: IO window: 0x004c00-0x004cff
    pci 0000:02:06.1: PREFETCH window: 0x34000000-0x37ffffff
    pci 0000:02:06.1: MEM window: 0x44000000-0x47ffffff
    pci 0000:02:06.3: CardBus bridge, secondary bus 0000:09
    pci 0000:02:06.3: IO window: 0x005000-0x0050ff
    pci 0000:02:06.3: IO window: 0x005400-0x0054ff
    pci 0000:02:06.3: PREFETCH window: 0x38000000-0x3bffffff
    pci 0000:02:06.3: MEM window: 0x48000000-0x4bffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:1e.0: IO window: 0x4000-0x5fff
    pci 0000:00:1e.0: MEM window: 0x90000000-0x902fffff
    pci 0000:00:1e.0: PREFETCH window: 0x00000030000000-0x0000003dffffff
    pci 0000:00:1e.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    pci 0000:02:06.0: PCI INT A -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
    pci 0000:02:06.1: PCI INT A -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
    pci 0000:02:06.3: PCI INT A -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
    bus: 00 index 0 io port: [0, ffff]
    bus: 00 index 1 mmio: [0, ffffffff]
    bus: 01 index 0 io port: [2000, 2fff]
    bus: 01 index 1 mmio: [90300000, 903fffff]
    bus: 01 index 2 mmio: [98000000, 9fffffff]
    bus: 01 index 3 mmio: [0, 0]
    bus: 02 index 0 io port: [4000, 5fff]
    bus: 02 index 1 mmio: [90000000, 902fffff]
    bus: 02 index 2 mmio: [30000000, 3dffffff]
    bus: 02 index 3 io port: [0, ffff]
    bus: 02 index 4 mmio: [0, ffffffff]
    bus: 03 index 0 io port: [4000, 40ff]
    bus: 03 index 1 io port: [4400, 44ff]
    bus: 03 index 2 mmio: [30000000, 33ffffff]
    bus: 03 index 3 mmio: [40000000, 43ffffff]
    bus: 05 index 0 io port: [4800, 48ff]
    bus: 05 index 1 io port: [4c00, 4cff]
    bus: 05 index 2 mmio: [34000000, 37ffffff]
    bus: 05 index 3 mmio: [44000000, 47ffffff]
    bus: 09 index 0 io port: [5000, 50ff]
    bus: 09 index 1 io port: [5400, 54ff]
    bus: 09 index 2 mmio: [38000000, 3bffffff]
    bus: 09 index 3 mmio: [48000000, 4bffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 614k freed
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1005
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:01:00.0: Boot video device
    vesafb: framebuffer at 0x98000000, mapped to 0xe0880000, using 3072k, total 32704k
    vesafb: mode is 1024x768x16, linelength=2048, pages=20
    vesafb: protected mode interface info at c000:59e9
    vesafb: pmi: set display start = c00c5a57, set palette = c00c5a91
    vesafb: pmi: ports = 2010 2016 2054 2038 203c 205c 2000 2004 20b0 20b2 20b4
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:5:5, shift=0:10:5:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
    00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    serial 0000:00:1f.6: PCI INT B -> Link[C0C2] -> GSI 11 (level, low) -> IRQ 11
    serial 0000:00:1f.6: PCI INT B disabled
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:C192,PNP0f13:C193] at 0x60,0x64 irq 1,12
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 288k freed
    input: AT Translated Set 2 keyboard as /class/input/input1
    Uniform Multi-Platform E-IDE driver
    piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x03)
    PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007)
    PIIX_IDE 0000:00:1f.1: PCI INT A -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
    piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x3c20-0x3c27
    ide1: BM-DMA at 0x3c28-0x3c2f
    Switched to high resolution mode on CPU 0
    Probing IDE interface ide0...
    hda: HTS548040M9AT00, ATA DISK drive
    hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
    hda: UDMA/100 mode selected
    Probing IDE interface ide1...
    hdc: SD-R2512, ATAPI CD/DVD-ROM drive
    hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
    hdc: MWDMA2 mode selected
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    ide1 at 0x170-0x177,0x376 on irq 15
    SCSI subsystem initialized
    No dock devices found.
    libata version 3.00 loaded.
    hda: max request size: 512KiB
    hda: 78140160 sectors (40007 MB) w/7877KiB Cache, CHS=16383/255/63
    hda: cache flushes supported
    hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
    hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
    Uniform CD-ROM driver Revision: 3.20
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    tg3.c:v3.94 (August 14, 2008)
    ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 11
    tg3 0000:02:0e.0: PCI INT A -> Link[C0C5] -> GSI 11 (level, low) -> IRQ 11
    eth0: Tigon3 [partno(BMC5705mA3) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:12:79:57:11:bd
    eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
    eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
    Intel ICH 0000:00:1f.5: power state changed by ACPI to D0
    Intel ICH 0000:00:1f.5: PCI INT B -> Link[C0C2] -> GSI 11 (level, low) -> IRQ 11
    Intel ICH 0000:00:1f.5: setting latency timer to 64
    intel8x0_measure_ac97_clock: measured 52750 usecs
    intel8x0: clocking to 48000
    Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[C0C2] -> GSI 11 (level, low) -> IRQ 11
    Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
    p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
    p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    usbcore: registered new interface driver zd1211rw
    ACPI: AC Adapter [C134] (on-line)
    ACPI: Battery Slot [C137] (battery present)
    ACPI: Battery Slot [C136] (battery absent)
    input: Power Button (FF) as /class/input/input2
    ACPI: Power Button (FF) [PWRF]
    input: Sleep Button (CM) as /class/input/input3
    ACPI: Sleep Button (CM) [C139]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [C138]
    ACPI: Transitioning device [C20F] to D3
    fan PNP0C0B:00: registered as cooling_device0
    ACPI: Fan [C20F] (off)
    ACPI: Transitioning device [C210] to D3
    fan PNP0C0B:01: registered as cooling_device1
    ACPI: Fan [C210] (off)
    ACPI: Transitioning device [C211] to D3
    fan PNP0C0B:02: registered as cooling_device2
    ACPI: Fan [C211] (off)
    ACPI: Transitioning device [C212] to D3
    fan PNP0C0B:03: registered as cooling_device3
    ACPI: Fan [C212] (off)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI0007:00: registered as cooling_device4
    ACPI: Processor [CPU0] (supports 8 throttling states)
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [TZ1] (64 C)
    thermal LNXTHERM:02: registered as thermal_zone1
    ACPI: Thermal Zone [TZ2] (48 C)
    thermal LNXTHERM:03: registered as thermal_zone2
    ACPI: Thermal Zone [TZ3] (31 C)
    Marking TSC unstable due to TSC halts in idle
    Linux agpgart interface v0.103
    agpgart-intel 0000:00:00.0: Intel 855PM Chipset
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt Link [C0C1] enabled at IRQ 10
    uhci_hcd 0000:00:1d.0: PCI INT A -> Link[C0C1] -> GSI 10 (level, low) -> IRQ 10
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1d.0: irq 10, io base 0x000038c0
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
    iTCO_vendor_support: vendor-support=0
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
    iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    intel_rng: FWH not detected
    ACPI: WMI: Mapper loaded
    ACPI: PCI Interrupt Link [C0C8] enabled at IRQ 10
    ehci_hcd 0000:00:1d.7: PCI INT D -> Link[C0C8] -> GSI 10 (level, low) -> IRQ 10
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: irq 10, io mem 0xa0000000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 10
    uhci_hcd 0000:00:1d.1: PCI INT B -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 10, io base 0x000038e0
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 10, io base 0x00003c00
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    usb 2-2: new high speed USB device using ehci_hcd and address 2
    input: Video Bus as /class/input/input5
    usb 2-2: configuration #1 chosen from 1 choice
    ACPI: Video Device [C0CF] (multi-head: yes rom: no post: no)
    usb 2-2: reset high speed USB device using ehci_hcd and address 2
    tpm_inf_pnp 00:0b: Found C197 with ID IFX0101
    tpm_inf_pnp 00:0b: TPM found: config base 0xe0, data base 0x1400, chip version 0x0006, vendor id 0x15d1 (Infineon), product id 0x0006 (SLD 9630 TT 1.1)
    phy0: Selected rate control algorithm 'pid'
    i801_smbus 0000:00:1f.3: PCI INT B -> Link[C0C2] -> GSI 11 (level, low) -> IRQ 11
    ACPI: I/O resource 0000:00:1f.3 [0x1200-0x121f] conflicts with ACPI region C087 [0x1200-0x1205]
    ACPI: Device needs an ACPI driver
    Yenta: CardBus bridge found at 0000:02:06.0 [103c:0890]
    Yenta O2: res at 0x94/0xD4: ea/00
    Yenta O2: enabling read prefetch/write burst
    parport_pc 00:04: reported by Plug and Play ACPI
    parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
    zd1211rw 2-2:1.0: phy0
    Yenta: ISA IRQ mask 0x0038, PCI irq 10
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff
    cs: IO port probe 0x4000-0x5fff: clean.
    pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x902fffff
    pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x3dffffff
    Yenta: CardBus bridge found at 0000:02:06.1 [103c:0890]
    Yenta: ISA IRQ mask 0x0038, PCI irq 10
    Socket status: 30000006
    Yenta: Raising subordinate bus# of parent bus (#02) from #05 to #08
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff
    cs: IO port probe 0x4000-0x5fff: clean.
    pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x902fffff
    pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x3dffffff
    Yenta: CardBus bridge found at 0000:02:06.3 [103c:0890]
    Yenta: ISA IRQ mask 0x0038, PCI irq 10
    Socket status: 30000006
    Yenta: Raising subordinate bus# of parent bus (#02) from #08 to #0c
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff
    cs: IO port probe 0x4000-0x5fff: clean.
    pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x902fffff
    pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x3dffffff
    input: PC Speaker as /class/input/input6
    NET: Registered protocol family 23
    lp0: using parport0 (interrupt-driven).
    Error: Driver 'pcspkr' is already registered, aborting...
    ppdev: user-space parallel port driver
    Synaptics Touchpad, model: 1, fw: 5.9, id: 0x1b6eb1, caps: 0xa84793/0x100000
    serio: Synaptics pass-through port at isa0060/serio4/input0
    input: SynPS/2 Synaptics TouchPad as /class/input/input7
    Detected unconfigured HP nc6000 family SMSC IrDA chip, pre-configuring device.
    Setting up Intel 82801 controller and SMSC device
    found SMC SuperIO Chip (devid=0x5a rev=00 base=0x004e): LPC47N227
    smsc_superio_flat(): fir: 0x130, sir: 0x2f8, dma: 03, irq: 5, mode: 0x0e
    SMsC IrDA Controller found
    IrCC version 2.0, firport 0x130, sirport 0x2f8 dma=3, irq=5
    No transceiver found. Defaulting to Fast pin select
    IrDA: Registered device irda0
    Error: Driver 'pcspkr' is already registered, aborting...
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: clean.
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: clean.
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: clean.
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    Clocksource tsc unstable (delta = -338066707 ns)
    EXT3 FS on hda6, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on hda7, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    fuse init (API version 7.9)
    FAT: Unrecognized mount option "locale=pl_PL.utf8" or missing value
    Adding 522072k swap on /dev/hda8. Priority:-1 extents:1 across:522072k
    input: PS/2 Generic Mouse as /class/input/input8
    pci 0000:01:00.0: PCI INT A -> Link[C0C1] -> GSI 10 (level, low) -> IRQ 10
    [drm] Initialized drm 1.1.0 20060810
    [drm] Initialized radeon 1.29.0 20080528 on minor 0
    agpgart-intel 0000:00:00.0: AGP 2.0 bridge
    agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
    pci 0000:01:00.0: putting AGP V2 device into 4x mode
    [drm] Setting GART location based on new memory map
    [drm] Loading R300 Microcode
    [drm] Num pipes: 1
    [drm] writeback test succeeded in 0 usecs
    firmware: requesting zd1211/zd1211b_ub
    firmware: requesting zd1211/zd1211b_uphr
    zd1211rw 2-2:1.0: firmware version 4725
    zd1211rw 2-2:1.0: zd1211b chip 079b:0062 v4810 high 00-60-b3 AL2230_RF pa0 g---S
    wlan0: authenticate with AP 00:16:41:f1:45:03
    wlan0: authenticated
    wlan0: associate with AP 00:16:41:f1:45:03
    wlan0: RX AssocResp from 00:16:41:f1:45:03 (capab=0x401 status=0 aid=1)
    wlan0: associated
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    wlan0: no IPv6 routers present
    and lsmod:
    bash-3.2# lsmod
    Module Size Used by
    ipv6 260132 8
    radeon 144416 2
    drm 74280 3 radeon
    vfat 12800 0
    fat 49312 1 vfat
    fuse 52892 2
    joydev 11584 0
    pcmcia 35116 0
    irtty_sir 7040 0
    sir_dev 13316 1 irtty_sir
    ppdev 9348 0
    lp 11108 0
    smsc_ircc2 16672 0
    irda 112568 2 sir_dev,smsc_ircc2
    crc_ccitt 3840 1 irda
    snd_pcsp 11040 0
    psmouse 38288 0
    serio_raw 7172 0
    arc4 3712 2
    parport_pc 36804 1
    parport 33004 3 ppdev,lp,parport_pc
    yenta_socket 25228 3
    rsrc_nonstatic 12672 1 yenta_socket
    ecb 4608 2
    crypto_blkcipher 17540 1 ecb
    pcmcia_core 33812 3 pcmcia,yenta_socket,rsrc_nonstatic
    i2c_i801 10768 0
    i2c_core 22420 1 i2c_i801
    container 5248 0
    tpm_infineon 10664 0
    tpm 14656 1 tpm_infineon
    tpm_bios 7680 1 tpm
    video 18064 0
    output 4608 1 video
    wmi 7592 0
    iTCO_wdt 12196 0
    iTCO_vendor_support 4996 1 iTCO_wdt
    ehci_hcd 36236 0
    uhci_hcd 24080 0
    shpchp 31380 0
    pci_hotplug 28064 1 shpchp
    intel_agp 27068 1
    agpgart 30804 2 drm,intel_agp
    thermal 17052 0
    evdev 11296 11
    processor 34732 2 thermal
    fan 6148 0
    button 7824 0
    battery 12036 0
    ac 6020 0
    zd1211rw 46724 0
    usbcore 134384 4 ehci_hcd,uhci_hcd,zd1211rw
    mac80211 158876 1 zd1211rw
    cfg80211 25224 1 mac80211
    cpufreq_ondemand 8588 1
    p4_clockmod 6084 0
    speedstep_lib 6148 1 p4_clockmod
    freq_table 5632 2 cpufreq_ondemand,p4_clockmod
    snd_intel8x0m 15500 0
    snd_intel8x0 30748 4
    snd_seq_oss 31872 0
    snd_ac97_codec 100516 2 snd_intel8x0m,snd_intel8x0
    snd_seq_midi_event 8192 1 snd_seq_oss
    snd_seq 49968 4 snd_seq_oss,snd_seq_midi_event
    snd_seq_device 8332 2 snd_seq_oss,snd_seq
    snd_pcm_oss 40192 0
    snd_pcm 69636 6 snd_pcsp,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
    snd_timer 21384 3 snd_seq,snd_pcm
    snd_page_alloc 9224 3 snd_intel8x0m,snd_intel8x0,snd_pcm
    snd_mixer_oss 16512 1 snd_pcm_oss
    snd 50724 17 snd_pcsp,snd_intel8x0m,snd_intel8x0,snd_seq_oss,snd_ac97_codec,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
    soundcore 8160 1 snd
    ac97_bus 3584 1 snd_ac97_codec
    tg3 121604 0
    libphy 18048 1 tg3
    rtc_cmos 11424 0
    rtc_core 17564 1 rtc_cmos
    rtc_lib 4480 1 rtc_core
    ext3 126344 2
    jbd 46228 1 ext3
    mbcache 8708 1 ext3
    ide_cd_mod 32900 0
    cdrom 35360 1 ide_cd_mod
    ide_disk 14336 5
    ata_piix 18308 0
    libata 153504 1 ata_piix
    dock 9616 1 libata
    scsi_mod 96460 1 libata
    piix 8072 4
    ide_pci_generic 5636 0
    ide_core 96200 4 ide_cd_mod,ide_disk,piix,ide_pci_generic
    Any ideas? Maybe somone has this notebook? Maybe its driver problem? But in glxgears i have about 1,1k FPS and also i have direct rendering. 
    I wish you could help me. Thanks anyway.
    Last edited by areiks (2008-12-21 21:46:46)

Maybe you are looking for

  • When I try to update to Itunes 11 I get an error message saying that Itunes has an invalid signature and wont be installed. I use Windows 7.

    Everytime I try to update to Itunes 11 I get an error message saying that Itunes has an invalid signature and can't be installed?  I have tried to install it two times and get the same message each time. Any solutions to my problem?? Those who have i

  • Questionnaires shipped in Oracle HRMS

    My requirement is to have a set of questions related to health in the form of a questionnaire . Employee needs to provide a Yes/No answer for each of the questions and submit it through self service. My initial thought was to have it in a descriptive

  • Display of values in sapscript output

    Hi, I am working on a sap script in which i am displaying the data coming from the program.but in 1 column there is a problem that it is not able to display the data properly i.e. it is a text which is not able to display properly. Same type of text

  • POS Interface with SAP

    Hi, We are currently using SAP ECC6.0, not on IS Retail. As we have quite a few POS machines being used in the business, we would like to interface POS with ECC6.0. Is there any third party tools available in the market for achieving this solution? T

  • Sales order without accounting context

    Hi all I need a sales order without billing. (With accounting or costing context required completely out of the way. The material type is without valuation) When I create the sales order I get following message (despite the settings described below):