Cloning using a Standby as Source

Hello,
Very often the development team and QA ask us (the DBA team) to refresh their sites. So far we are doing it using the common procedure :
1. Shutdown APPS
2. Preclone DB and APPS
3. Copy to new server
4. Clone, Post-Clone activities
Now,we have a physical standby for business continuity. My question is can we use a copy of the standby to clone the site (Please provide procedure) ?
This would help us do the job at any time besides the weekends.
Also, can we execute preclone on production while the system is working ?
Thanks in advance !
Edited by: FTejeda on Jun 4, 2011 7:20 PM

Now,we have a physical standby for business continuity. My question is can we use a copy of the standby to clone the site (Please provide procedure) ?
This would help us do the job at any time besides the weekends.No, because the standby database should be open when you run preclone and in this case it is no longer a standby (it becomes primary and the primary becomes standby -- Switchover).
Also, can we execute preclone on production while the system is working ?Yes.
Thanks,
Hussein

Similar Messages

Using a SQL data source and XML data source in the same template

I am trying to develop a template for the Request for Quote report generated in Apps 11.5.10. I have loaded the data from the XML output into the template, but I am missing one field - I need the org_id from the po_headers table. Is it possible to use a sql data source (i.e., "select org_id from po_headers_all where po_header_id = [insert header_id from xml data]...") in addition to the xml data source to populate the template at runtime? When you use the Insert > SQL functionality is it static at the time the template is created, or does it call to the database at runtime? I've looked through all the docs I could find, but this isn't clear.
Thanks for any help or suggestions you may have.
Rhonda

Hi Pablo
Thats a tough one ... if you go custom with a data template you will at least get support on the data template functionality ie you have a problem when you try and build one. You will not get support on the query inside the data template as you might have gotten with the Oracle Report, well you could at least log a bug against development for a bad query.
Eventually that Oracle Report will be converted by development anyway, theres an R12 project going on right now to switch the shipped OReports to data templates. AT this point you'll be fully supported again but:
1. You have to have R12 and
2. You'll need to wait for the patch
On reflection, if you are confident enough in the query then Oracle will support you on its implementation within a data template. Going forward you may be able to swap out your DT and out in the Oracle one without too much effort.
Regards, Tim

Bursting using a Concatenated Data Source

Greetings,
I am trying to burst a report using a concatenated data source. I have a bursting SQL query set up that works fine, but I am unsure how to handle the "Split By" option. I have a data model that pulls data from multiple queries, like this:
DETAILS_A
select * from table_a
where payee_id in (:p_payee_id)
DETAILS_B
select * from table_b
where payee_id in (:p_payee_id)
So, if I choose to "Split By" Details_A_Row/Payee_ID, then the data from Details_A is split appropriately, but the reports I generate don't split the information from Details_B properly. I end up with reports where one payee has information for another payee from the Details_B data source. How can I specify that the report should also split/filter the info from Details_B?
To put it another way, what I'd really like to do is go through a list of parameters (payee IDs in this example) and generate a report for each parameter. Is Bursting the most effective way to do this?
From searching the forums, it seems like I might be able to accomplish this using Data Templates as my Data Model instead of SQL Queries. Am I on the right track with that? If so, you guys have any helpful links on how to create Data Templates?
I am using BI Publisher version 10.1.3.4
Any help is appreciated!
Martin

For data template samples, check the following out and then download the zip file (you may not be able to run the reports, but you can view the code)
http://blogs.oracle.com/xmlpublisher/2009/06/data_template_progression.html
Thanks,
BIPuser

The startup disk can't be used as a restore source

Dear,
can anybody tell, whenver i tried to clone (thru disk utility using firwire cable ) my macbookpro with imac (latest one), it shows me the folloing information/error
i.e.
The startup disk can’t be used as a restore source.
To use this disk as a source, restart your computer using the recovery system, and open Disk Utility again.
Followed the below steps_________________________
Disk Utility> Selected HDD > Restore (tab) > drag hdd to SOURCE (it is my MBP) > dragged hdd to DESTINATION (it is iMac) > Restore
Looking your reply.
Regards
K.Pradhan

Are you trying to copy the OSX drive from a MacBookPro to an iMac? If so, be glad it won't let you. Most likely, it won't run at all; if it does, all sorts of things will go wrong.
What are you trying to do? If you're trying to set one Mac up like another one, see How do I set up a new Mac from an old one, its backups, or a PC?

Can I use/convert Flash *.fla sources to Flex sources?

I have an older project with a *.fla source file.
Can I use this old Flash source in Flex SDK resp. Flex
builder too?
Do I have to convert this *.fla source in advance?
Peter

I did some further Investigation on my own. Actually YES YOU CAN EXPORT VIDEO DIRECTLY from flash to AVI - MOV
just select export/export movie/avi
From there you can select the output resolution and have full HD 1920x1080.

Which user id is used in each data source?

Using SQ: SSRS 2008 R2 - Beginner - Is there a report or query that provides which user ID is associated with the data source of each report? I need to be able to list out all the data sources being used and which user id is being used in the data source
configuration instead of going to each report and using manage to review this. Any help is greatly appreciated

Thank you - This is useful - but the username column is encrypted - how do I unencrypt
as per my knowledge there is no way to decrypt it and below link confirm my understanding :)but there is work around also that have shared on technet;
https://social.msdn.microsoft.com/Forums/en-US/f65b4d50-abaa-400b-a09d-ae1d7d1ea041/decrypt-the-connectionstring?forum=sqlreportingservices
WITH XMLNAMESPACES -- XML namespace def must be the first in with clause.
(DEFAULT 'http://schemas.microsoft.com/sqlserver/reporting/2006/03/reportdatasource'
,'http://schemas.microsoft.com/SQLServer/reporting/reportdesigner'
AS rd)
,SDS AS
(SELECT SDS.name AS SharedDsName
,SDS.[Path]
,CONVERT(xml, CONVERT(varbinary(max), content)) AS DEF
FROM dbo.[Catalog] AS SDS
WHERE SDS.Type = 5) -- 5 = Shared Datasource
SELECT CON.[Path]
,CON.SharedDsName
,CON.ConnString
FROM
(SELECT SDS.[Path]
,SDS.SharedDsName
,DSN.value('ConnectString[1]', 'varchar(200)') AS ConnString
FROM SDS
CROSS APPLY
SDS.DEF.nodes('/DataSourceDefinition') AS R(DSN)
) AS CON
-- Optional filter:
-- WHERE CON.ConnString LIKE '%Initial Catalog%=%TFS%'
ORDER BY CON.[Path]
,CON.SharedDsName;
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com

Using table comparison can we use multiple tables as source?

Using table comparison can we use multiple tables as source?
Thank you very much for the helpful info.

Table Comparison
1) Input Data coming in
2) Comparison table (table to which the data is compared)
3) Output (input rows with respective opcodes based on the comparison result of input dataset with the comparison table)
If your question is whether table comparison can accept union/join of multiple table sources, you can achieve by using merge/query transforms and then feeding to table comparison. Here, you have to be careful about choosing the primary keys inside table comparison

Pls. identify some seeded views used as Existing Data Source in DBI Reports

Hi!
Can someone please identify some seeded views used as Existing Data Source in DBI Reports. I only need some idea how they are defined.
Thanks.

Jon632 wrote:
Hi!
Can someone please identify some seeded views used as Existing Data Source in DBI Reports. I only need some idea how they are defined.
Thanks.
You can find the list of seeded views in eTRM website -- http://etrm.oracle.com/pls/etrm
Are there seeded tables/views of DBI dimension objects in Oracle EBS?
Thanks,
Hussein

Can I use FileMaker as a source for mail merge in Pages

Can I use FileMaker as a source for mail merge in Pages

Sorry I posted this and then started reading some of the replies. I did see them as I am newbie here.
Looks like the only solution at this time is to export the data to a csv file, open it in numbers and use the numbers file as the source for the mail merge.
Would it be possible to have FileMaker then run an applescript ? or automator script to automatically convert the CSV file to numbers and then rename that Numbers file so that it is consistent and can be reused by the Pages "template" for subsequent documents to be used based on this template?

Using Excel as data source

Hi,
i have created a crystal report that uses Excel as data source. Reason i used excel is for easy updating of data by non IT users. The report runs perfectly on my computer, but when i upload it to Infoview, there is error when i run the report from Infoview:
"The database logon information for this report is either incomplete or incorrect."
"Unable to retrieve Object.
The database logon information for this report is either incomplete or incorrect."
May i know what causes the error? There is no user id/password to access the excel file.
I have also tried saving the excel in the same server as the crystal report server, but i still face the same error.
Pls help!
Thanks

You would have created a connection in your local system to access the XLS data
You should be creating a similar connection in the server as well and then update the rpt file with the connection details in CMS
Thanks,
Ganesh

Using Essbase as a source

Have anyone of you used Essbase as a source for OBISE1? Do you find any restrictions on it?

The search button on the right works pretty well.
OBIEE with Essbase as datasource-what I need to know
For more, I'd hope that you will be able to search & do indicate if this answers your question and acknowledge by sharing the points :-)

Xletview: why not use sun's javaTV source code directly ?

xletview : one emulator for viewing MHP Xlets on a PC;
I see many difference from sun's code about the part of javaTV.
Why the author Martin Sveden need to rewrite them and not use sun's javaTV source code directly ?
Thank you for your any answer.
Sorry for my horrible english.

XleView is a fine effort, but it has its limitations. I tried using it for the GunBunny demo available in the JavaME SDK 3.0 Eary Access available in
http://java.sun.com/javame/downloads/sdk30ea.jsp
and I encountered some of thost limitations. What Sveden does it several tricky manipulations in a classloader for the Xlet. In particular, he translates bytecode as he loads the Xlet's classes, changing some class names, such as changing
java.awt.Toolkit
tto
xjava.awt.Toolkit
This works up to a point. This version of Toolkit usually just turns around calls java.awt.Toolkit's corresponding routine, but he deliberately he does not implement the ubiquitous
public Image createImage(URL url)
When I downloaded his source and tried adding ths into his code, I then encountered at runtime
Uncaught error fetching image:
java.lang.NullPointerException
at sun.awt.image.URLImageSource.getConnection(URLImageSource.java:97)
at sun.awt.image.URLImageSource.getDecoder(URLImageSource.java:107)
at sun.awt.image.InputStreamImageSource.doFetch(InputStreamImageSource.java:240)
at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:172)
at sun.awt.image.ImageFetcher.run(ImageFetcher.java:136)
I think that this is some optimization within J2SE where they do not wait for the image to load and do the fetching in a separate thread. I do not know if there is some way to force the Sun's JVM to disable this optimization and I have not investigated furher, but I did email Svenden. I noticed that the current version of XleTView is 0.3.6 which is dated June 2004 and the web site http://www.xletview.org/ has had not news since 2005 .
I note that Svenden provides an elegant user interface but I advise you not try to learn the API's from his classes: he makes no effort to keep his implementation separate from the API standards so, for instance, his version of HScene is
package org.havi.ui;
public class HScene extends Container
implements HComponentOrdering, ImageObserver, MenuContainer, Serializable {
whereas the real standard is
public class HScene extends Container
implements HComponentOrdering {
I hate to critize such a fine effort, but it is best to keep an imlementation separate from the public API.
I agree that having a lightweight, simple and Java feature-complete Xlet viewer running would be very helpful, especially if BD-J gains much popularity. I have found trying to work with the vendor players described at
http://wiki.java.net/bin/view/Mobileandembedded/Blu-RayDiscHelloWorld
to be frustrating. I tried all four mentioned and I have gotten none of them to work for me yet. These are huge downloads and the "Intro Version" of Arcsoft pointed to at the SDK 3.0 Early Access page
http://www.arcsoft.com/products/totalmediatheatre/
just gives a "File not found" HTML page. This forum post mentions that perhaps it was recently taken down?
http://www.arcsoft.com/forum/forum_posts.asp?TID=1084
I have already emailed Michael Downs of Arcsoft since he is mentioned here:
http://wiki.java.net/bin/view/Mobileandembedded/BDJPCPlayers
What did work for me was to take Sun's JavaTV 1.1 Reference Implementation and PowerDVD's BDJ.jar and hack/fix a few classes to get GunBunny to work within the RI's RunXlet program. This is not trivial but I will will describe:
Download the JavaME 3.0 SDK EA and then download the correct version of PowerDVD that the SDK page points to:
http://www.brothersoft.com/powerdvd-download-50794.html
Download the RI binary and source of Java TV API 1.1
http://java.sun.com/javame/technology/javatv/index.jsp
Since I am too lazy to use anything but the latest 1.6 JRE as a runtime, I have to fix
com.sun.tv.media.util.MediaThread
to comment out its stop() method. This is becase stop() was deprecated and made final in J2SE 1.5
http://java.sun.com/j2se/1.5.0/docs/api/java/lang/Thread.html#stop()
http://java.sun.com/j2se/1.5.0/docs/guide/misc/threadPrimitiveDeprecation.html
Next, I had to mae a change to Sun's JavaTV implementation to keep the GunBunny demo happy by providing a ServiceContext. The RunXlet program calls SIEmulator, but that environment does not provide a ServiceContex, so I added one back in:
com.sun.tv.receiver.SIEmulator
private static ServiceContext svcctx = null;
Add before every call to new AppSignalEvent() and add the svcctx as the second-to-last argument:
if(svcctx == null){ try { svcctx = new com.sun.tv.ServiceContextImpl(); }catch (Exception e){ e.printStackTrace(); } }
I then had to hack a few PowerDVD classes, which is evil of me. First, I had to build an empty class by the name of
sun.util.BDJPlugin
becuase some PowerDVD class extends it but it is not in its BDJ.jar and then I had to reverse-compile (evil!) and modify one of their internal classes to avoid a dependency on their native methods. What I ended up with was a hacked version of com.cl.bdj.helper.CUtil to avoid the native methods which access the registry where they query for registry settings but also provide a default value (which I return).
com.cl.bdj.helper.CUtil
private static String pGetRegistryString(long i ,String string ,String string3) {
return string3;
private static int pGetRegistryInt(long i ,String string ,int j) {
return j;
The last thing I had to do was to change com.hdccookbook.gunbunny.BaseXlet, to use the JavaTV container rather than the org.havi one:
import javax.tv.graphics.TVContainer;
import java.awt.Container;
change
// protected HScene scene;
protected Container scene;
public final void run() {
// waitForPresenting();
// scene = HSceneFactory.getInstance().getDefaultHScene();
scene = TVContainer.getRootContainer(xletContext);
In order to having working keys, I had to add the KeyListener interface to BaseXet and
run(){
addKeyListener(this);
and then add a near duplicate of the org.dvb.event.UserEvent* stuff that is already there:
public void keyPressed(KeyEvent e){
switch(e.getKeyCode()){
case KeyEvent.VK_0:
case KeyEvent.VK_1:
case KeyEvent.VK_2:
case KeyEvent.VK_3:
case KeyEvent.VK_4:
case KeyEvent.VK_5:
case KeyEvent.VK_6:
case KeyEvent.VK_7:
case KeyEvent.VK_8:
case KeyEvent.VK_9:
numberKeyPressed(e.getKeyCode() - KeyEvent.VK_0);
break;
case KeyEvent.VK_ENTER:
enterKeyPressed();
break;
case KeyEvent.VK_LEFT:
arrowLeftKeyPressed();
break;
case KeyEvent.VK_RIGHT:
arrowRightPressed();
break;
case KeyEvent.VK_UP:
arrowUpPressed();
break;
case KeyEvent.VK_DOWN:
arrowDownPressed();
break;
public void keyReleased(KeyEvent e){
// System.out.println("Released: e="+e+" code="+e.getKeyCode());
public void keyTyped(KeyEvent e) {
// System.out.println("Typed: e="+e+" code="+e.getKeyCode());
It then comes up and functions, but the rendering is not very good. Again, this is complete hack. Running the Java TV 1.1 RI in a JRE 1.6 is not supported. If you try to run any of the other examples, you will discover that the XML parsing is broken in JRE 1.6 with this message:
Parsing failed: com.sun.org.apache.xerces.internal.impl.io.MalformedByteSequence
Exception: Invalid byte 1 of 1-byte UTF-8 sequence., file: lib\JavaTVSampleFile01.xml
and you have to go and change the lines in
lib\JavaTV.properties
from
ServiceFileHandler=com.sun.tv.receiver.ReceiverFile
# ServiceFileHandler=SampleData_01
to
# ServiceFileHandler=com.sun.tv.receiver.ReceiverFile
ServiceFileHandler=SampleData_01
and build samples\db\SampleData_01.java and put it in your classpath along with all these other hacks.
Nonetheless, if you want to develop a somewhat generic Xlet that uses some BD-J features, that is how you might do it. But the moment you exercise anything else in the vendor's BDJ.jar that simply doe snot work outside of their environment or invokes one of their native methods, you are again stuck.
It would be nice if Sun would at least bother to update the JavaTV RI with the fixes I hae mentioned. Their "jmflite" implementation does not render perfecly but at least it would give the programmer something to work with without having to deal with an older JRE, etc.
Andrew
Edited by: AndrewMorrow on Oct 20, 2008 2:48 AM

Using physical standby to upgrade to the next major release

Hi
Can one use a physical standby to upgrade from 9i to 10g or from 10g to 11g ?
We cannot use logical standby due to datatype problems
Thanks
Orna

You can use logical standby to perform a rolling upgrade, if you are above 10.1.0.3 - see http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10gR2_RollingUpgradeBestPractices.pdf
Also see http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10gR2_TransientLogicalRollingUpgrade.pdf
HTH
Srini

Bought an iPod nano for use in an external source to the unit of the BMW. It works, but don't remember the place when you turn off the power and every time begins to play the playlist first.

Bought an iPod nano for use in an external source to the unit of the BMW. It works, but don't remember the place when you turn off the power and every time begins to play the playlist first.

Thanks iPod Whisperer--
I do realize that the nano will resume where I left off in my audiobook if I reload the file that was last playing.
What I was hoping is that the 6g nano would work like my previous iPods and default to the last file played the next time played after Iused sleep mode instead of going to some random song on the iPod.
Since I usually have a lot of audiobooks on my iPod--and most of those have 10-15 files in them, it's a pain to have to navigate to the correct file (and try to remember which of the 10-15 files I was last playing). On all my other iPods I could simply hit play and it would start up in the audiobook right where it left off.
Note--this only happens if I use the sleep timer to turn off the iPod. If I pause the book myself, when I turn the iPod back on it'll "remember" what file it was playing.
Hope this makes sense.
dordale

Can you use Apple TV and source films/music from two different Macs in the home?

Can you use Apple TV and source films/music from two different Macs in the home?

not at the same time but yes.
set up home sharing on both computers and Apple TV using the same Apple ID.
Setting up Home Sharing on your computer
Setting up Home Sharing for Apple TV (2nd generation)

Cloning using a Standby as Source

Similar Messages

Maybe you are looking for