Close tab button appears on both sides of tab and I couldn't find the option to fix it in the two addons I suspect of causing this: Tab Mix Plus & TreeStyle Tab
After I switched to Tab Mix plus I started getting the close button on both sides of tabs which causes me to accidentally close them all the time.
I also use TreeStyle Tab and I suspect an option in one of these two addons caused this... Or maybe a conflict?
I tried to solve it myself through the addon options but to no luck.
I'd like to keep both addons because they're great, help please?
Try to ask advice at the Tab Mix Plus forum:
*http://tmp.garyr.net/forum/viewforum.php?f=3
Similar Messages
-
With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution, With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution
Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
Bebers5 -
I am trying to download photos from my digital camera. I have done this many times before with this same camera; however this time when I click the "import all" button I get a message that states that the format is unrecognizable. It doesn't specify what the format is.
What is causing this and how do I correct it? Any ideas would be greatly appreciated!
Thank you!
AimeeMake a temporary, backup copy of the library and try the following:
launch iPhoto with the Command+Option keys held down and rebuild the library.
select the options identified in the screenshot.
Click to view full size
Launch iPhoto and try importing again.
OT -
Does this save a .jpeg somewhere?
The edits you do in LR are non destructive, and are saved automatically to the catalog, so there's no need for a Save button.
If you need a jpg for a particular purpose, select the image in the Library, and click Export.
The export dialog lets you fill in size, resolution, color space, sharpening, etc. -
How to scan both sides of document in color to pdf with the dr-m160?
how to scan both sides of document in color to pdf with the dr-m160?
Hi healthynhappy1.
To scan a 2-sided document, you will need to change the scanner settings in the software.
If you are using Capture On Touch:
You will need to turn off the "Scan in Full Auto" option.
Next, you will open [Scanner Settings] and change the "Scanning Side" to Duplex.
Verify that the [Color Mode] shows "24-bit Color" and when you get the option to save the file, verify the [File Type] shows as "PDF".
If you are using CapturePerfect:
Click [Scan].
Click [Scanner Settings].
Change the [Scan Side] to "Duplex".
Verify that [Color Mode] is set for "Color" and then save the file as "PDF".
I hope that this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666). Have a great day!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
I'm trying to reverb an audio clip in my timeline and I can't find the effect tab in the browser to drag to my audio clip to reverb. I can reverb the clip in the viewer but it won't drag to the timeline. I'm using FCE
You cannot drag the effects themselves to the timeline. You add them to a clip in the Viewer, just as you have done.
If the clip was already in the timeline when you opened it in the Viewer (by double-clicking it in the timeline to open it in the Viewer) and then added the reverb effect, there is nothing further to do, you have added the effect to the clip. You don't drag it back to the timeline.
You only have to drag the clip to the timeline if the clip was not already in the timeline (for example, if you opened the clip from the FCE Browser; or set different In and Out points in a master clip to use a different portion of the master clip in a different location in your timeline).
Depending on the effect you add, you may have to render the timeline after adding the effect. But I don't think reverb requires immediate rendering. One other note, you said you were working with an audio clip ... audio clips need to be AIFF (not MP3 or something else) and preferably 16-bit stereo. -
Does Apple make/sell the new "Apple In-Ear Headphones with Remote and Mic" with a one sided configuration? So that a person that is deaf in one can hear both sides of a stereo recording? Also, since the "other" bud is not necessary/useful...it's removed.
As far as I know, Apple sells no such configuration. However, under Settings > General > Accessability, there is an option to play back audio in monoural mode, which would then play both halves of a stereo mix in each earbud.
Hope that helps. -
I ordered prints from Apple. They came back with the people on both sides cut off. How do I correct the problem?
crop to the print size before ordering - for example you can not fit a 8x12 iomage onto a 8 x10 sheet of paper
LN -
I saw a post on how to load iMovie 6 without deleting iMovie 9 or iLife 11 I can't find the post now does anyone know if this is possible. I do not want risk not being able to reload iMovie 9 it appears that I would have to reload the whole iLife suit
Could have been mine!
Happily this is easily achieved, but it has to be done backwards.
Delete iMovie 9 (just drag it to the trash). Now install iMovie 6 from the iLife 6 install disks.
Now re-install iMovie 9. This automatically moves iMovie 6 into a folder it creates in your Applications folder called iMovie Previous Version.
Now you have them both, and you can have both in the Dock as well.
Alternatively you could try this method, suggested by poster Uitech:
Open a terminal and type "touch /Library/Preferences/com.apple.iLife08.plist"
(No quotes)
Install iMovieHD6 from the iLife 6 install disk.
This works with both Leopard and Snow Leopard Macs. -
I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes
Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H. -
After upgrading to iOS5 & everything was restored,I couldn't find the downloaded movies I had before.I kept on syncing it with iTunes.I can see videos are taking up space on my Ipad 2 memory in the iTunes page but it doesn't appear,only songs appear on the Music.thank you in advance for your assistance..
They are now in the videos app!
-
I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files. I then installed a purchased product from Adobe disc using the serial number on the case. But when I try to launch it, I get a screen headed Photoshop CS5 Extended Trial. It asks for the serial number and says that my trial has expired. It rejects the serial number from the Adobe case saying "This Serial Number is not valid for this product". It thinks that I still have the expired Trial Version installed. How do I convince it (the program) that the Trial Version is long gone and the currently installed product was installed with a valid and accepted serial number????
Let me know how it goes. Go into your Adobe account and register your serial number asap.
https://www.adobe.com/account/my-products-services.html
That way, should you lose it or you need support, it is on record that it's yours and you can fetch your s/n it from anywhere.
There are too may sad stories here, where people forgot and the box is buried or lost.
Gene -
I have updated both my iphone 4G and my husbands 4G with the nAew 5 update but now have his contacts on my phone and everytime he downloads an app it goes on my phone. How can I change this? Do I have to have two separate Apple ID's
Try this
http://support.apple.com/kb/ht1495
Hope it helps. -
Can anyone help please? When downloading photos to iPhoto, they no longer appear as Events and I can't find the photos in "Photos".
You can batch correct the date on all of those photos with the Photos ➙ Adjust Date & Time menu option:
OT -
I have forgotten both my user id and password to login to the iMac.
I have forgotten both my user id and password to login to the iMac. It is my children's computer so I don't have it linked to the cloud. I believe it is running Lion but I can't get past the login screen to check.
I have tried the administrator password with no success and I have also tried command R to restart with no success. It is on my wireless network if that would help.
Any suggestions?
CassandraI cannot get past the login screen to follow those instructions. The administrator password is not working.
Cassandra
Maybe you are looking for
-
It was working just fine and then it just quit. I tried turning it back on but it wouldn't work. Then like 3 days later, I tried turning it on and it came on and worked ok and just quit again. Again, I tried turning it back on and again, it wouldn't
-
Vendor/customer for plants
Hi! I always forget, where can I enter a vendor or a customer code for plants. It is a 4.6c R/3 SAP. Can anyone please help me out? Thank you Tamá
-
I want to move with my workflow from iViewMediaPro totally to AP2 via Annoture (hope the update coming soon), but I'm a little bit disappointed of Apple's IPTC management. I wonder what happens with the "people" field in IVMP (which isn't a real IPTC
-
MS Communicator: what is it and how to configure i...
Got the latest update for my C6-01 and now there is also something called Microsoft Communicator. Did try to find some info and found it but still not sure what this app does? Also, how to configure it? Things to put in are username, password, URL CW
-
[IDCS2-JS] Excluding Master Pages from Search
Hi, Is there a way to exclude text in the master page in search? I'm running a script that will search a list of words that will search a book then insert page references for an index. But using app.search includes the master page, how can I limit th