Cluster Creation Validation Error - List Services
Good Afternoon All,
I am setting up a simple two node Windows 2008 SP2 Failover cluster. The nodes are brand new and patched with all updates. Having gone through this process many times before I was confident it would be quick and painless. However I am getting
the following validation error that I have never seen before:
An error occurred while executing the test. There was an error getting information about the running services on the nodes. There was an error retrieving information about the Services from node 'Node.domain'. Object reference not set to an instance of an
object
I'm at a complete loss as to where to start. If the task is to simply obtain a list of running services I would have thought that would be relatively straight forward. A simple Get-Service from Powershell will display those details. I have
located a KB article that refers to this exact error and there is a hotfix available but this is strictly for Windows 2008 R2 not R1 (SP2).
http://support.microsoft.com/kb/2559392
Has anyone seen this error before?
Hi valleydoofer,
This error some time occur when you installed Powershell 3, please try to uninstall Powershell 3 from the nodes then rerun the validation.
More information:
Install and Configure Windows PowerShell
http://msdn.microsoft.com/en-us/library/cc952756(v=exchsrvcs.149).aspx
Best Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Similar Messages
-
SAML Validation Error - Proxy Service - Process WS-Security Header
I am testing a Proxy Service that inspects the WS-Security Header which contains a WS-Policy for a SAML Assertion sender-vouches. The SAML Assertion that is produced is valid according to the oassis schema, but ALSB 2.6 returns a SOAP Fault that the SAML Assertion is not valid. Is there any next steps I should take to diagnose the problem? Also, are there any good tools available for validating a SAML Assertion?
Here is the response of the ALSB 2.6 running on WebLogic 9.2. It is a simple proxy service we use to test whether SAML is working correctly or not. The client correctly sends the sender-voucher with the username/password/certificate alias and so forth.
<soapenv:Envelope xmlns:soapenv="http://www.w3.org/2003/05/soap-envelope">
<soapenv:Body>
<soapenv:Fault
xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<axis2ns1:Code xmlns:axis2ns1="http://www.w3.org/2003/05/soap-envelope">
<axis2ns1:Value>soapenv:Sender</axis2ns1:Value>
<axis2ns1:Subcode>
<axis2ns1:Value>wsse:InvalidSecurityToken</axis2ns1:Value>
</axis2ns1:Subcode>
</axis2ns1:Code>
<axis2ns2:Reason xmlns:axis2ns2="http://www.w3.org/2003/05/soap-envelope">
<axis2ns2:Text xml:lang="en-US"
>Security token failed to validate. weblogic.xml.crypto.wss.SecurityTokenValidateResult@563c52a[status: false][msg The SAML token is not valid.]</axis2ns2:Text>
</axis2ns2:Reason>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
Thanks,
Jay BlantonHi, Pls send your client code to my mail [email protected]
-
Failing "List Services Information" Cluster validation test
Hi
I'm building a 2 node Windows 2008 SP2 Cluster. I've setup the SAN Disks, NIcs etc and am running the cluster validation tests. However this always fails on the "List Services Information" Test with the following error statement:
"An error occurred while executing the test. There was an error getting information about the running services on the nodes. There was an error retrieving information about the Services from node '<Server FQDN>'. Object reference not set to an
instance of an object.
Note: I replaced the actual server fqdn with <Server FQDN>
Any help is appreciated.
ThanksHi,
I know it is not a SQL cluster but you could still have a try with steps below as a workaround. See:
http://support.microsoft.com/kb/953748/en-us
•For an integrated failover Add-Note setup, run the following command on each node that is being added:
Setup /SkipRules=Cluster_VerifyForErrors /Action=InstallFailoverCluster
•For an advanced or enterprise installation, run the following command:
Setup /SkipRules=Cluster_VerifyForErrors /Action=CompleteFailoverCluster
•If you receive this validation failure when you add a node to an existing failover installation, run the following command on each node that is being added:
Setup /SkipRules=Cluster_VerifyForErrors /Action=AddNode
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected] -
Failover cluster validation errors
We are trying to set up a failover cluster file server between two domain controllers running Windows Server 2012 RC.
When we go through the Validate Configuration wizard, we receive the following errors messages against the Active Directory configuration (names have been changed).
"It could not be determined whether node computer1.example.com is a read only domain controller because of this error: The object does not exist."
and
"Node(s) computer1.example.com computer2.example.com cannot reach a writable domain controller. Please check connectivity of these nodes to the domain controllers."
Does anyone have any ideas why this might be happening? Replication and DNS appear to be working fine for all other services.I did some tracking down of the problem, and it appears that it stems from the cluster not being able to retrieve the node names. The function specifically is called GetFqdnNodeNamesFromCluster( ).
It can be seen if you run "Get-ClusterLog" while the cluster is in the process of being created. This error seems to be the root of the cluster creation failure. Here is a stacktrace:
PS C:\Users\gamroot> Get-ClusterLog -v
VERBOSE: Connecting to cluster on local computer TESTNODE1.
VERBOSE: at MS.Internal.ServerClusters.Cluster.GetNodes()
at Microsoft.FailoverClusters.PowerShell.FCCmdlet.GetFqdnNodeNamesFromCluster(Cluster cluster, Boolean onlineOnly)
at Microsoft.FailoverClusters.PowerShell.GetClusterLogCommand.WrappedProcessRecord()
at Microsoft.FailoverClusters.PowerShell.FCCmdlet.ProcessRecord()
VERBOSE: at MS.Internal.ServerClusters.Cluster.GetCoreClusterGroup()
at MS.Internal.ServerClusters.SafeFilteredEnumHandle..ctor(Cluster cluster, Boolean filterCoreGroups, Boolean
filterCoreResources)
at MS.Internal.ServerClusters.SafeClusterEnumHandle..ctor(Void* enumHandle, Cluster cluster, ClusterEnumType
enumType, SafeClusterEnumHandleOptions options, SafeClusEnumHandleType safeClusEnumHandleType)
at MS.Internal.ServerClusters.NativeMethods.ClusterOpenEnum(Cluster cluster, ClusterEnumType enumType,
SafeClusterEnumHandleOptions options)
at MS.Internal.ServerClusters.Cluster.GetNodes()
VERBOSE: at MS.Internal.ServerClusters.ClusterRegistryKey.GetValue(String name)
at MS.Internal.ServerClusters.Cluster.GetCoreClusterGroup()
VERBOSE:
Get-ClusterLog : Failed to retrieve the list of nodes for 'TESTCLUSTER1'.
Could not retrieve the core cluster group for the cluster 'TESTCLUSTER1'.
An error occurred while querying the value 'ClusterGroup'.
Element not found
At line:1 char:1
+ Get-ClusterLog -v
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (:) [Get-ClusterLog], ClusterCmdletException
+ FullyQualifiedErrorId : NotFound,Microsoft.FailoverClusters.PowerShell.GetClusterLogCommand -
Weblogic app server wsdl web service call with SSL Validation error = 16
Weblogic app server wsdl web service call with SSL Validation error = 16
I need to make wsdl web service call in my weblogic app server. The web service is provided by a 3rd party vendor. I keep getting error
Cannot complete the certificate chain: No trusted cert found
Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure
Validation error = 16
From the SSL debug log, I can see 3 verisign hierarchy certs are correctly loaded (see 3 lines in the log message starting with “adding as trusted cert”). But somehow after first handshake, I got error “Cannot complete the certificate chain: No trusted cert found”.
Here is how I load trustStore and keyStore in my java program:
System.setProperty("javax.net.ssl.trustStore",”cacerts”);
System.setProperty("javax.net.ssl.trustStorePassword", trustKeyPasswd);
System.setProperty("javax.net.ssl.trustStoreType","JKS");
System.setProperty("javax.net.ssl.keyStoreType","JKS");
System.setProperty("javax.net.ssl.keyStore", keyStoreName);
System.setProperty("javax.net.ssl.keyStorePassword",clientCertPwd); System.setProperty("com.sun.xml.ws.transport.http.client.HttpTransportPipe.dump","true");
Here is how I create cacerts using verisign hierarchy certs (in this order)
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignClass3G5PCA3Root.txt -alias "Verisign Class3 G5P CA3 Root"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediatePrimary.txt -alias "Verisign C3 G5 Intermediate Primary"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediateSecondary.txt -alias "Verisign C3 G5 Intermediate Secondary"
Because my program is a weblogic app server, when I start the program, I have java command line options set as:
-Dweblogic.security.SSL.trustedCAKeyStore=SSLTrust.jks
-Dweblogic.security.SSL.ignoreHostnameVerification=true
-Dweblogic.security.SSL.enforceConstraints=strong
That SSLTrust.jks is the trust certificate from our web server which sits on a different box. In our config.xml file, we also refer to the SSLTrust.jks file when we bring up the weblogic app server.
In addition, we have working logic to use some other wsdl web services from the same vendor on the same SOAP server. In the working web service call flows, we use clientgen to create client stub, and use SSLContext and WLSSLAdapter to load trustStore and keyStore, and then bind the SSLContext and WLSSLAdapter objects to the webSerive client object and make the webservie call. For the new wsdl file, I am told to use wsimport to create client stub. In the client code created, I don’t see any way that I can bind SSLContext and WLSSLAdapter objects to the client object, so I have to load certs by settting system pramaters. Here I attached the the wsdl file.
I have read many articles. It seems as long as I can install the verisign certs correctly to web logic server, I should have fixed the problem. Now the questions are:
1. Do I create “cacerts” the correct order with right keeltool options?
2. Since command line option “-Dweblogic.security.SSL.trustedCAKeyStore” is used for web server jks certificate, will that cause any problem for me?
3. Is it possible to use wsimport to generate client stub that I can bind SSLContext and WLSSLAdapter objects to it?
4. Do I need to put the “cacerts” to some specific weblogic directory?
---------------------------------wsdl file
<wsdl:definitions name="TokenServices" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:tns="http://tempuri.org/" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsap="http://schemas.xmlsoap.org/ws/2004/08/addressing/policy" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:msc="http://schemas.microsoft.com/ws/2005/12/wsdl/contract" xmlns:wsa10="http://www.w3.org/2005/08/addressing" xmlns:wsx="http://schemas.xmlsoap.org/ws/2004/09/mex" xmlns:wsam="http://www.w3.org/2007/05/addressing/metadata">
<wsp:Policy wsu:Id="TokenServices_policy">
<wsp:ExactlyOne>
<wsp:All>
<sp:TransportBinding xmlns:sp="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy">
<wsp:Policy>
<sp:TransportToken>
<wsp:Policy>
<sp:HttpsToken RequireClientCertificate="true"/>
</wsp:Policy>
</sp:TransportToken>
<sp:AlgorithmSuite>
<wsp:Policy>
<sp:Basic256/>
</wsp:Policy>
</sp:AlgorithmSuite>
<sp:Layout>
<wsp:Policy>
<sp:Strict/>
</wsp:Policy>
</sp:Layout>
</wsp:Policy>
</sp:TransportBinding>
<wsaw:UsingAddressing/>
</wsp:All>
</wsp:ExactlyOne>
</wsp:Policy>
<wsdl:types>
<xsd:schema targetNamespace="http://tempuri.org/Imports">
<xsd:import schemaLocation="xsd0.xsd" namespace="http://tempuri.org/"/>
<xsd:import schemaLocation="xsd1.xsd" namespace="http://schemas.microsoft.com/2003/10/Serialization/"/>
</xsd:schema>
</wsdl:types>
<wsdl:message name="ITokenServices_GetUserToken_InputMessage">
<wsdl:part name="parameters" element="tns:GetUserToken"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetUserToken_OutputMessage">
<wsdl:part name="parameters" element="tns:GetUserTokenResponse"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetSSOUserToken_InputMessage">
<wsdl:part name="parameters" element="tns:GetSSOUserToken"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetSSOUserToken_OutputMessage">
<wsdl:part name="parameters" element="tns:GetSSOUserTokenResponse"/>
</wsdl:message>
<wsdl:portType name="ITokenServices">
<wsdl:operation name="GetUserToken">
<wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetUserToken" message="tns:ITokenServices_GetUserToken_InputMessage"/>
<wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetUserTokenResponse" message="tns:ITokenServices_GetUserToken_OutputMessage"/>
</wsdl:operation>
<wsdl:operation name="GetSSOUserToken">
<wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserToken" message="tns:ITokenServices_GetSSOUserToken_InputMessage"/>
<wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserTokenResponse" message="tns:ITokenServices_GetSSOUserToken_OutputMessage"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="TokenServices" type="tns:ITokenServices">
<wsp:PolicyReference URI="#TokenServices_policy"/>
<soap12:binding transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="GetUserToken">
<soap12:operation soapAction="http://tempuri.org/ITokenServices/GetUserToken" style="document"/>
<wsdl:input>
<soap12:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="GetSSOUserToken">
<soap12:operation soapAction="http://tempuri.org/ITokenServices/GetSSOUserToken" style="document"/>
<wsdl:input>
<soap12:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="TokenServices">
<wsdl:port name="TokenServices" binding="tns:TokenServices">
<soap12:address location="https://ws-eq.demo.i-deal.com/PhxEquity/TokenServices.svc"/>
<wsa10:EndpointReference>
<wsa10:Address>https://ws-eq.demo.xxx.com/PhxEquity/TokenServices.svc</wsa10:Address>
</wsa10:EndpointReference>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
----------------------------------application log
adding as trusted cert:
Subject: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x641be820ce020813f32d4d2d95d67e67
Valid from Sun Feb 07 19:00:00 EST 2010 until Fri Feb 07 18:59:59 EST 2020
adding as trusted cert:
Subject: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x3c9131cb1ff6d01b0e9ab8d044bf12be
Valid from Sun Jan 28 19:00:00 EST 1996 until Wed Aug 02 19:59:59 EDT 2028
adding as trusted cert:
Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x250ce8e030612e9f2b89f7054d7cf8fd
Valid from Tue Nov 07 19:00:00 EST 2006 until Sun Nov 07 18:59:59 EST 2021
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Cipher: SunPKCS11-Solaris version 1.6 for algorithm DESede/CBC/NoPadding>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Cipher for algorithm DESede>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA/ECB/NoPadding>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSetup: loading trusted CA certificates>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 28395435>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
at javax.xml.ws.Service.<init>(Service.java:56)
at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 22803607>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 14640403>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - 12.29.210.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
at javax.xml.ws.Service.<init>(Service.java:56)
at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 16189141>I received a workaround by an internal message.
The how to guide is :
-Download the wsdl file (with bindings, not the one from ESR)
-Correct it in order that the schema corresponds to the answer (remove minOccurs or other things like this)
-Deploy the wsdl file on you a server (java web project for exemple). you can deploy on your local
-Create a new logicial destination that point to the wsdl file modified
-Change the metadata destination in your web dynpro project for the corresponding model and keep the execution desitnation as before.
Then the received data is check by the metadata logical destination but the data is retrieved from the correct server. -
How do you resolve Financial Management service validation error in EPM ?
Does anyone know how to resolve Financial Management service validation error from EPM Diagnostic Report?
Environment:
Quad-Core AMD Processor 2.2 GHz (Server Machine)
5 GB RAM
Server 2003 Standard 32-Bit SP2 (also tried in Enterprise)
Application Server:
WebLogic Server 9.2 Custom Installation (with Add-Ins)
http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
Database:
Oracle 10gR2 (Standard Installation per step-by-step guide from Oracle)
http://www.oracle.com/technology/software/products/database/index.html
Hyperion EMP System 11.1.1.3:
Installer
Foundation Services (4 Files )
EMP Architect
Financial Management, Planning, Financial Reporting and Web Analysis (primarily interested in FM)
http://www.oracle.com/technology/software/products/bi/performance-management/index.html
The following are the sequences of steps carried out during the Installation and Configuration of EPM:
1) Installed the Server along with its respective SP2 – Shutdown the machine
2) Assigned IP and DNS addresses
3) Installed Window components by ticking Application Server Console, Enable COM+ access, IIS and DNS
4) Run “dcpromo” to create a Domain Controller with default values and assigned a domain name – Shutdown the machine
5) Installed Weblogic Server 9.2 and configure it using Configuration Wizard – Selected “test environment” and ticked default “listening port” – Shutdown the machine
6) Basic installation of Oracle Database 10gR2 using Step-by-Step guide provided by Oracle and carried out Password Management steps. After installation, I then created a user “oracle” and assigned it to ora_dba User Group with the required Local Security Policies – “log on as a batch job” and “Act as part of operating system”
7) Logged into database and acknowledge the licensing window – Shutdown the machine
8) Restarted the machine and checked all relevant and newly installed Database and WebLogic services are running.
9) Started Installing EPM components by double clicking “InstallTool.cmd” and selected all relevant components at ONCE as per Installation Guide – Result: - All selected EPM components were successfully installed without errors or exceptions
10) At the end of installation window, I carried out the configuration in the following scearios:
Scenario 1: Configuration all at Default settings
Scenario 2: Configuration all, except “Application Server” I selected the WebLogic9.2
Scenario 3: Configuration all, except “Application Server” and “Workspace Web Server” were being Welogic9.2 and IIS HTTP
RESULT: After all numerous installations, all came down to ONE ERROR from “Diagnostic Report” stating the following:
Financial Management:
FAILED SVR: HFM Service Validation Check if HFM service in working state.
Error: Error message: <03/11/2010 05:32:26 PM> CreateApplicationCAS... Failed at line: 2
Recommended Action: Make sure HAT utility is working. 1 s
I then simply ignored this error and tried to deploy an Application, all worked fine until you get to the point at “Job Console” where you need to press “Refresh” button. Progress remained at 12% until it got timedout after 300 seconds and force attempt of refreshing resulting in “aborted” job with the following error:
Error Reference Number: {DB3940F5-2D4A-46AB-A370-77F82F121BBA}
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:39:58 PM;Svr: PBAR;File: CHsvDataSourceImpl.cpp;Line: 196;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: CHsxServer.cpp;Line: 1276;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: CHsxServer.cpp;Line: 1190;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: AgentHelper.cpp;Line: 728;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 1;DTime: 4/12/2010 4:40:08 PM;Svr: PBAR;File: CHfmAwbAgent.cpp;Line: 744;Ver: 11.1.1.3.0.2413;
This is, I believe preventing me from deploying Consolidation Apps, including Sample Application provided with EPM Downloads. I have tried installing and configuring by components. All failed with the same outcome.
I have been working on this effortlessly in different combinations to get at least one Financial Management Application get deployed so I could enhance my learning adventure. As it stands, I am not sure where to get help and completely lost in the World of Oracle. I am also come to wonder whether “Free Downloads of EPM” are indeed, is “complete and is in working-state” or do I need a licence to use for personal learning experience? Are there different downloads for different needs or/users For example, eDelivery downloads are different from OTN Agreement downloads?
I have downloaded the files from following URL:
http://www.oracle.com/technology/software/products/bi/performance-management/index.html
I am completely lost and all services are up and running and not sure what I am missing!! Any assistance will be greatly appreciated.
Many Thanks
BT
Edited by: user8973921 on 13-Apr-2010 05:08
Edited by: user8973921 on 13-Apr-2010 10:56
Edited by: user8973921 on 14-Apr-2010 02:30I am having exactly the same problem using Windows 2003 Standard editions SP2. Is there anyone who knows a possible solution for this? The effect on HFM is that is not possible to create an application, since I always get an error that says "Server execution failed"
Error Reference Number: {E68F87E6-588E-4665-862C-AAB02CB299DA}
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServerImpl.cpp;Line: 3522;Ver: 11.1.1.3.0.2413;
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServer.cpp;Line: 1115;Ver: 11.1.1.3.0.2413;
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServer.cpp;Line: 857;Ver: 11.1.1.3.0.2413;
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxClient.cpp;Line: 2106;Ver: 11.1.1.3.0.2413; -
Validation error while creating Web Service Proxy.
Hi,
I'm trying to create Web Service Proxy. But I'm stuck with a Validation error
model error: type
+"{http://xmlns.oracle.com/2001/XMLSchema/DOM}+
+org.w3c.dom.Document" not found.+
I'm using "Create Web Service Proxy" wizard. There are 6 steps in creating proxy through JDev. wizard.
First step itself displaying the above validation error when I click on "Next" button.
Few points
We have created web service using "oracle.j2ee.ws.StatelessJavaRpcWebService" servlet
Thanks in advance.
-SukumarHi,
It might be that the .net service which you have is not WS-I compliant. Can you first run WS-I Analyzer on the wsdl to see it the test passes.
Thanks,
Vishal -
Error: Halting this cluster node due to unrecoverable service failure
Our cluster has experienced some sort of fault that has only become apparent today. The origin appears to have been nearly a month ago yet the symptoms have only just manifested.
The node in question is a standalone instance running a DistributedCache service with local storage. It output the following to stdout on Jan-22:
Coherence <Error>: Halting this cluster node due to unrecoverable service failure
It finally failed today with OutOfMemoryError: Java heap space.
We're running coherence-3.5.2.jar.
Q1: It looks like this node failed on Jan-22 yet we did not notice. What is the best way to monitor node health?
Q2: What might the root cause be for such a fault?
I found the following in the logs:
2011-01-22 01:18:58,296 Coherence Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:18:58.296/9910749.462 Oracle Coherence EE 3.5.2/463 <Error> (thread=Cluster, member=33): Attempting recovery (due to soft timeout) of Guard{Daemon=DistributedCache}
2011-01-22 01:18:58,296 Coherence Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:18:58.296/9910749.462 Oracle Coherence EE 3.5.2/463 <Error> (thread=Cluster, member=33): Attempting recovery (due to soft timeout) of Guard{Daemon=DistributedCache}
2011-01-22 01:19:04,772 Coherence Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:04.772/9910755.938 Oracle Coherence EE 3.5.2/463 <Error> (thread=Cluster, member=33): Terminating guarded execution (due to hard timeout) of Guard{Daemon=DistributedCache}
2011-01-22 01:19:04,772 Coherence Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:04.772/9910755.938 Oracle Coherence EE 3.5.2/463 <Error> (thread=Cluster, member=33): Terminating guarded execution (due to hard timeout) of Guard{Daemon=DistributedCache}
2011-01-22 01:19:05,785 Coherence Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:05.785/9910756.951 Oracle Coherence EE 3.5.2/463 <Error> (thread=Termination Thread, member=33): Full Thread Dump
Thread[Reference Handler,10,system]
java.lang.Object.wait(Native Method)
java.lang.Object.wait(Object.java:485)
java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
Thread[DistributedCache,5,Cluster]
java.nio.Bits.copyToByteArray(Native Method)
java.nio.DirectByteBuffer.get(DirectByteBuffer.java:224)
com.tangosol.io.nio.ByteBufferInputStream.read(ByteBufferInputStream.java:123)
java.io.DataInputStream.readFully(DataInputStream.java:178)
java.io.DataInputStream.readFully(DataInputStream.java:152)
com.tangosol.util.Binary.readExternal(Binary.java:1066)
com.tangosol.util.Binary.<init>(Binary.java:183)
com.tangosol.io.nio.BinaryMap$Block.readValue(BinaryMap.java:4304)
com.tangosol.io.nio.BinaryMap$Block.getValue(BinaryMap.java:4130)
com.tangosol.io.nio.BinaryMap.get(BinaryMap.java:377)
com.tangosol.io.nio.BinaryMapStore.load(BinaryMapStore.java:64)
com.tangosol.net.cache.SerializationPagedCache$WrapperBinaryStore.load(SerializationPagedCache.java:1547)
com.tangosol.net.cache.SerializationPagedCache$PagedBinaryStore.load(SerializationPagedCache.java:1097)
com.tangosol.net.cache.SerializationMap.get(SerializationMap.java:121)
com.tangosol.net.cache.SerializationPagedCache.get(SerializationPagedCache.java:247)
com.tangosol.net.cache.AbstractSerializationCache$1.getOldValue(AbstractSerializationCache.java:315)
com.tangosol.net.cache.OverflowMap$Status.registerBackEvent(OverflowMap.java:4210)
com.tangosol.net.cache.OverflowMap.onBackEvent(OverflowMap.java:2316)
com.tangosol.net.cache.OverflowMap$BackMapListener.onMapEvent(OverflowMap.java:4544)
com.tangosol.util.MultiplexingMapListener.entryDeleted(MultiplexingMapListener.java:49)
com.tangosol.util.MapEvent.dispatch(MapEvent.java:214)
com.tangosol.util.MapEvent.dispatch(MapEvent.java:166)
com.tangosol.util.MapListenerSupport.fireEvent(MapListenerSupport.java:556)
com.tangosol.net.cache.AbstractSerializationCache.dispatchEvent(AbstractSerializationCache.java:338)
com.tangosol.net.cache.AbstractSerializationCache.dispatchPendingEvent(AbstractSerializationCache.java:321)
com.tangosol.net.cache.AbstractSerializationCache.removeBlind(AbstractSerializationCache.java:155)
com.tangosol.net.cache.SerializationPagedCache.removeBlind(SerializationPagedCache.java:348)
com.tangosol.util.AbstractKeyBasedMap$KeySet.remove(AbstractKeyBasedMap.java:556)
com.tangosol.net.cache.OverflowMap.removeInternal(OverflowMap.java:1299)
com.tangosol.net.cache.OverflowMap.remove(OverflowMap.java:380)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$Storage.clear(DistributedCache.CDB:24)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onClearRequest(DistributedCache.CDB:32)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ClearRequest.run(DistributedCache.CDB:1)
com.tangosol.coherence.component.net.message.requestMessage.DistributedCacheRequest.onReceived(DistributedCacheRequest.CDB:12)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:9)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:136)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onNotify(DistributedCache.CDB:3)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)
Thread[Finalizer,8,system]
java.lang.Object.wait(Native Method)
java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
Thread[PacketReceiver,7,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketReceiver.onWait(PacketReceiver.CDB:2)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[RMI TCP Accept-0,5,system]
java.net.PlainSocketImpl.socketAccept(Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
java.lang.Thread.run(Thread.java:619)
Thread[PacketSpeaker,8,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.queue.ConcurrentQueue.waitForEntry(ConcurrentQueue.CDB:16)
com.tangosol.coherence.component.util.queue.ConcurrentQueue.remove(ConcurrentQueue.CDB:7)
com.tangosol.coherence.component.util.Queue.remove(Queue.CDB:1)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketSpeaker.onNotify(PacketSpeaker.CDB:62)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)
Thread[Logger@9216774 3.5.2/463,3,main]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[PacketListener1,8,Cluster]
java.net.PlainDatagramSocketImpl.receive0(Native Method)
java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)
java.net.DatagramSocket.receive(DatagramSocket.java:712)
com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:20)
com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:19)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)
Thread[main,5,main]
java.lang.Object.wait(Native Method)
com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:79)
com.networkfleet.cacheserver.Launcher.main(Launcher.java:122)
Thread[Signal Dispatcher,9,system]
Thread[RMI TCP Accept-41006,5,system]
java.net.PlainSocketImpl.socketAccept(Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
java.lang.Thread.run(Thread.java:619)
ThreadCluster
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[TcpRingListener,6,Cluster]
java.net.PlainSocketImpl.socketAccept(Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
com.tangosol.coherence.component.net.socket.TcpSocketAccepter.accept(TcpSocketAccepter.CDB:18)
com.tangosol.coherence.component.util.daemon.TcpRingListener.acceptConnection(TcpRingListener.CDB:10)
com.tangosol.coherence.component.util.daemon.TcpRingListener.onNotify(TcpRingListener.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)
Thread[PacketPublisher,6,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketPublisher.onWait(PacketPublisher.CDB:2)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[RMI TCP Accept-0,5,system]
java.net.PlainSocketImpl.socketAccept(Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
sun.management.jmxremote.LocalRMIServerSocketFactory$1.accept(LocalRMIServerSocketFactory.java:34)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
java.lang.Thread.run(Thread.java:619)
Thread[PacketListenerN,8,Cluster]
java.net.PlainDatagramSocketImpl.receive0(Native Method)
java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)
java.net.DatagramSocket.receive(DatagramSocket.java:712)
com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:20)
com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:19)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)
Thread[Invocation:Management,5,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[DistributedCache:PofDistributedCache,5,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[Invocation:Management:EventDispatcher,5,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.Service$EventDispatcher.onWait(Service.CDB:7)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[Termination Thread,5,Cluster]
java.lang.Thread.dumpThreads(Native Method)
java.lang.Thread.getAllStackTraces(Thread.java:1487)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
com.tangosol.net.GuardSupport.logStackTraces(GuardSupport.java:791)
com.tangosol.coherence.component.net.Cluster.onServiceFailed(Cluster.CDB:5)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$Guard.terminate(Grid.CDB:17)
com.tangosol.net.GuardSupport$2.run(GuardSupport.java:652)
java.lang.Thread.run(Thread.java:619)
2011-01-22 01:19:05,785 Coherence Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:05.785/9910756.951 Oracle Coherence EE 3.5.2/463 <Error> (thread=Termination Thread, member=33): Full Thread Dump
Thread[Reference Handler,10,system]
java.lang.Object.wait(Native Method)
java.lang.Object.wait(Object.java:485)
java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
Thread[DistributedCache,5,Cluster]
java.nio.Bits.copyToByteArray(Native Method)
java.nio.DirectByteBuffer.get(DirectByteBuffer.java:224)
com.tangosol.io.nio.ByteBufferInputStream.read(ByteBufferInputStream.java:123)
java.io.DataInputStream.readFully(DataInputStream.java:178)
java.io.DataInputStream.readFully(DataInputStream.java:152)
com.tangosol.util.Binary.readExternal(Binary.java:1066)
com.tangosol.util.Binary.<init>(Binary.java:183)
com.tangosol.io.nio.BinaryMap$Block.readValue(BinaryMap.java:4304)
com.tangosol.io.nio.BinaryMap$Block.getValue(BinaryMap.java:4130)
com.tangosol.io.nio.BinaryMap.get(BinaryMap.java:377)
com.tangosol.io.nio.BinaryMapStore.load(BinaryMapStore.java:64)
com.tangosol.net.cache.SerializationPagedCache$WrapperBinaryStore.load(SerializationPagedCache.java:1547)
com.tangosol.net.cache.SerializationPagedCache$PagedBinaryStore.load(SerializationPagedCache.java:1097)
com.tangosol.net.cache.SerializationMap.get(SerializationMap.java:121)
com.tangosol.net.cache.SerializationPagedCache.get(SerializationPagedCache.java:247)
com.tangosol.net.cache.AbstractSerializationCache$1.getOldValue(AbstractSerializationCache.java:315)
com.tangosol.net.cache.OverflowMap$Status.registerBackEvent(OverflowMap.java:4210)
com.tangosol.net.cache.OverflowMap.onBackEvent(OverflowMap.java:2316)
com.tangosol.net.cache.OverflowMap$BackMapListener.onMapEvent(OverflowMap.java:4544)
com.tangosol.util.MultiplexingMapListener.entryDeleted(MultiplexingMapListener.java:49)
com.tangosol.util.MapEvent.dispatch(MapEvent.java:214)
com.tangosol.util.MapEvent.dispatch(MapEvent.java:166)
com.tangosol.util.MapListenerSupport.fireEvent(MapListenerSupport.java:556)
com.tangosol.net.cache.AbstractSerializationCache.dispatchEvent(AbstractSerializationCache.java:338)
com.tangosol.net.cache.AbstractSerializationCache.dispatchPendingEvent(AbstractSerializationCache.java:321)
com.tangosol.net.cache.AbstractSerializationCache.removeBlind(AbstractSerializationCache.java:155)
com.tangosol.net.cache.SerializationPagedCache.removeBlind(SerializationPagedCache.java:348)
com.tangosol.util.AbstractKeyBasedMap$KeySet.remove(AbstractKeyBasedMap.java:556)
com.tangosol.net.cache.OverflowMap.removeInternal(OverflowMap.java:1299)
com.tangosol.net.cache.OverflowMap.remove(OverflowMap.java:380)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$Storage.clear(DistributedCache.CDB:24)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onClearRequest(DistributedCache.CDB:32)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ClearRequest.run(DistributedCache.CDB:1)
com.tangosol.coherence.component.net.message.requestMessage.DistributedCacheRequest.onReceived(DistributedCacheRequest.CDB:12)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:9)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:136)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onNotify(DistributedCache.CDB:3)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)
Thread[Finalizer,8,system]
java.lang.Object.wait(Native Method)
java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
Thread[PacketReceiver,7,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketReceiver.onWait(PacketReceiver.CDB:2)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[RMI TCP Accept-0,5,system]
java.net.PlainSocketImpl.socketAccept(Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
java.lang.Thread.run(Thread.java:619)
Thread[PacketSpeaker,8,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.queue.ConcurrentQueue.waitForEntry(ConcurrentQueue.CDB:16)
com.tangosol.coherence.component.util.queue.ConcurrentQueue.remove(ConcurrentQueue.CDB:7)
com.tangosol.coherence.component.util.Queue.remove(Queue.CDB:1)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketSpeaker.onNotify(PacketSpeaker.CDB:62)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)
Thread[Logger@9216774 3.5.2/463,3,main]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[PacketListener1,8,Cluster]
java.net.PlainDatagramSocketImpl.receive0(Native Method)
java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)
java.net.DatagramSocket.receive(DatagramSocket.java:712)
com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:20)
com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:19)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)
Thread[main,5,main]
java.lang.Object.wait(Native Method)
com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:79)
com.networkfleet.cacheserver.Launcher.main(Launcher.java:122)
Thread[Signal Dispatcher,9,system]
Thread[RMI TCP Accept-41006,5,system]
java.net.PlainSocketImpl.socketAccept(Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
java.lang.Thread.run(Thread.java:619)
ThreadCluster
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[TcpRingListener,6,Cluster]
java.net.PlainSocketImpl.socketAccept(Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
com.tangosol.coherence.component.net.socket.TcpSocketAccepter.accept(TcpSocketAccepter.CDB:18)
com.tangosol.coherence.component.util.daemon.TcpRingListener.acceptConnection(TcpRingListener.CDB:10)
com.tangosol.coherence.component.util.daemon.TcpRingListener.onNotify(TcpRingListener.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)
Thread[PacketPublisher,6,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketPublisher.onWait(PacketPublisher.CDB:2)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[RMI TCP Accept-0,5,system]
java.net.PlainSocketImpl.socketAccept(Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
sun.management.jmxremote.LocalRMIServerSocketFactory$1.accept(LocalRMIServerSocketFactory.java:34)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
java.lang.Thread.run(Thread.java:619)
Thread[PacketListenerN,8,Cluster]
java.net.PlainDatagramSocketImpl.receive0(Native Method)
java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)
java.net.DatagramSocket.receive(DatagramSocket.java:712)
com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:20)
com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:19)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)
Thread[Invocation:Management,5,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[DistributedCache:PofDistributedCache,5,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[Invocation:Management:EventDispatcher,5,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.Service$EventDispatcher.onWait(Service.CDB:7)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[Termination Thread,5,Cluster]
java.lang.Thread.dumpThreads(Native Method)
java.lang.Thread.getAllStackTraces(Thread.java:1487)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
com.tangosol.net.GuardSupport.logStackTraces(GuardSupport.java:791)
com.tangosol.coherence.component.net.Cluster.onServiceFailed(Cluster.CDB:5)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$Guard.terminate(Grid.CDB:17)
com.tangosol.net.GuardSupport$2.run(GuardSupport.java:652)
java.lang.Thread.run(Thread.java:619)
2011-01-22 01:19:06,738 Coherence Logger@9216774 3.5.2/463 INFO 2011-01-22 01:19:06.738/9910757.904 Oracle Coherence EE 3.5.2/463 <Info> (thread=main, member=33): Restarting Service: DistributedCache
2011-01-22 01:19:06,738 Coherence Logger@9216774 3.5.2/463 INFO 2011-01-22 01:19:06.738/9910757.904 Oracle Coherence EE 3.5.2/463 <Info> (thread=main, member=33): Restarting Service: DistributedCache
2011-01-22 01:19:06,738 Coherence Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:06.738/9910757.904 Oracle Coherence EE 3.5.2/463 <Error> (thread=main, member=33): Failed to restart services: java.lang.IllegalStateException: Failed to unregister: Distr
butedCache{Name=DistributedCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, BackupCount=1, AssignedPartitions=16, BackupPartitions=16}
2011-01-22 01:19:06,738 Coherence Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:06.738/9910757.904 Oracle Coherence EE 3.5.2/463 <Error> (thread=main, member=33): Failed to restart services: java.lang.IllegalStateException: Failed to unregister: Distr
butedCache{Name=DistributedCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, BackupCount=1, AssignedPartitions=16, BackupPartitions=16}Hi
It seems like the problem in this case is the call to clear() which will try to load all entries stored in the overflow scheme to emit potential cache events to listeners. This probably requires much more memory than there is Java heap available, hence the OOM.
Our recommendation in this case is to call destroy() since this will bypass the even firing.
/Charlie -
SelectOneMenu dropdown list Validation Error
I've been trying to get a selectOneMenu working properly for a while now. I've added a "blank" value at the top, but it seems to be causing me a lot of problems.
If I click the "Cancel" button on my page, which navigates away from the current page, I get this error: "Validation Error: Value is not valid" if I've selected "None" from the dropdown list.
Here's my code for my selectOneMenu :
<h:selectOneMenu binding="#{task.dropDownCategoryNew}" id="dropDownCategoryNew" style="position: absolute; left: 576px; top: 480px" value="#{SessionBeanTask.intSelectedValue}">
<f:selectItem itemLabel="None" itemValue="0"/>
<f:selectItems binding="#{task.dropdown1SelectItems}" id="dropdown1SelectItems" value="#{task.task_categoryDataProvider.options['task_category.id,task_category.name']}"/>
</h:selectOneMenu>Does anyone have any idea why this might not be working?
Thanks so muchAlright I got it.
You were perfectly right, I was storing the first item as a string with the value "0". What confused me was that in the HTML source code they all were represented as:<option value="0" selected="selected">None</option>
<option value="1">Sales</option>All I had to do was bind the selectItem to an int value like this:
<f:selectItem itemLabel="None" itemValue="#{task.intNoneValue}"/>Thank you BalusC -
P1 Validation Errors on BMP/Package Services/Flat/Non-Barcoded
We getting the following error;
:MPU_WT [4062] - The maximum weight for Package Services Bound Printed Matter and Media/Library Flats is 20 oz.
You should get this error I believe IF the job is sorted to be barcoded/machinable(USFM1000) and is OVER 20oz. We have the job set to Non-machinable. Yet we get this error as if we have it set to automated. Is anyone getting this validation error since release of PostalOne 26 was put into place on 1/3?Latest from P1 minutes
o Release 26 Known Issue: This incorrect error message is being removed in a patch release. The DMM states maximum weight for Bound Printed Matter BPM flats claiming a bar code discount is 20 oz. The DMM states maximum weight for all other Bound Printed Matter BPM flats is 15 lbs. The 20 oz requirement for all BPM flats was an error and must be removed. After the meeting: The incorrect validation was removed January 9, 2011.
The maximum weight for any piece of library or media mail is 70 lbs. The correct requirement will be implemented in a future release. The 20 oz requirement for Media and Library Mail flats was an error and must be removed. After the meeting: The incorrect validation was removed January 9, 2011.
o The version weight for Periodical and Pending Periodical Machinable Flats cannot be greater than 22 oz. After the meeting, it was determined this is a known issue, the maximum weight for Machinable flats per DMM 707.26.2 is 4.4 lbs. This validation will be removed in a patch release. After the meeting: The incorrect validation will be removed January 16, 2011.
Thanks
Anita S. -
Address list service failed to respond error on Exchange 2007 (after adding first 2013 server)
Hi,
We just installed an Exchange 2013 server within an Exchange 2007 environment.
The Exchange 2013 (CU6) server will be used to setup a hybrid connection with O365, and move mailboxes to O365.
After installing the Exchange 2013 server it isn't possible anymore to create/enable mailboxes on the Exchange 2007 server.
We end up with an error :
Mig1 TestAccount
Failed
Error:
The Exchange server address list service failed to respond. This could be because of an address list or email address policy configuration error.
Exchange Management Shell command attempted:
Enable-Mailbox -Identity 'domain.be/customer/TEMP/Mig1 TestAccount' -Alias 'mig1' -Database 'Exchange2007\SG01\DB02'
When executed via EMS we receive this error :
The Exchange server address list service failed to respond. This could be because of an address list or email address policy configuration errorHi Lyncer
This error can be caused if the default Public Folder Database not being pointed to the exchange 2007 database which you are trying to create a new mailbox.
Also it can happen if System Attendant service is not running.
Troubleshooting steps:
1) Restart the System Attendant Service
2) Point the affected database to the default public folder
Follow the below steps to do that
Open EMC
Go to Organization Configuration > Mailbox.
Select the mailbox database that you want to change the default public folder database.
Right click the database and select properties
In <Mailbox Database Name> Properties, click the Client Settings tab.
Next to the Default public folder database box, click Browse.
In Select Public Folder Database, select the public folder database from the list of public folder databases, and then click OK.
Cheers!!!
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP) -
FND_FLEX_SERVER validation error during Requisition Creation
Has anyone encountered this inconsistent issue FND_FLEX_SERVER validation error (something related to account generator) at the time of creating requisition in iProcurement? I'm getting nowhere with my SR. Oracle wants me to provide a log of the error, but, I cannot get one unless I can re-create it (which I have been unable to do so far)!
But, I have atleast 3 such errors reported by the users. It is very frustrating.
Any pointers, or help will be very much appreciated.
ThanksHi Utsav
Our users are entering the correct accounts. I do not believe this is due to charge account. It is intermittent, and that is what is very frustrating. Our users have to keep logging off and logging back in and try again and sometime, it clicks!!
The most unfortunate thing about this is that it is also difficult to get the log of the statement being executed by OAF at that time. We have to turn on the tracing on the screen and by the time we get to the point where the error appears, the log is some 600 pages and cannot be cut and pasted into a document.
Any assistance?
Thanks -
Failover Cluster creation fails 2012R2
Create Cluster
Cluster: FailoverCluster
Node: WS2012R2-2.yottabyte.inc
Node: WS2012R2-1.yottabyte.inc
IP Address: DHCP address on 192.168.136.0/24
Started 3/31/2015 11:48:52 PM
Completed 3/31/2015 11:52:13 PM
Beginning to configure the cluster FailoverCluster.
Initializing Cluster FailoverCluster.
Validating cluster state on node WS2012R2-2.yottabyte.inc.
Find a suitable domain controller for node WS2012R2-2.yottabyte.inc.
Searching the domain for computer object 'FailoverCluster'.
Bind to domain controller \\WS2012R2-1.yottabyte.inc.
Check whether the computer object FailoverCluster for node WS2012R2-2.yottabyte.inc exists in the domain. Domain controller \\WS2012R2-1.yottabyte.inc.
Computer object for node WS2012R2-2.yottabyte.inc does not exist in the domain.
Creating a new computer account (object) for 'FailoverCluster' in the domain.
Check whether the computer object WS2012R2-2 for node WS2012R2-2.yottabyte.inc exists in the domain. Domain controller \\WS2012R2-1.yottabyte.inc.
Creating computer object in organizational unit CN=Computers,DC=yottabyte,DC=inc where node WS2012R2-2.yottabyte.inc exists.
Create computer object FailoverCluster on domain controller \\WS2012R2-1.yottabyte.inc in organizational unit CN=Computers,DC=yottabyte,DC=inc.
Check whether the computer object FailoverCluster for node WS2012R2-2.yottabyte.inc exists in the domain. Domain controller \\WS2012R2-1.yottabyte.inc.
Configuring computer object 'FailoverCluster in organizational unit CN=Computers,DC=yottabyte,DC=inc' as cluster name object.
Get GUID of computer object with FQDN: CN=FAILOVERCLUSTER,CN=Computers,DC=yottabyte,DC=inc
Validating installation of the Network FT Driver on node WS2012R2-2.yottabyte.inc.
Validating installation of the Cluster Disk Driver on node WS2012R2-2.yottabyte.inc.
Configuring Cluster Service on node WS2012R2-2.yottabyte.inc.
Validating installation of the Network FT Driver on node WS2012R2-1.yottabyte.inc.
Validating installation of the Cluster Disk Driver on node WS2012R2-1.yottabyte.inc.
Configuring Cluster Service on node WS2012R2-1.yottabyte.inc.
Waiting for notification that Cluster service on node WS2012R2-2.yottabyte.inc has started.
Forming cluster 'FailoverCluster'.
Unable to successfully cleanup.
An error occurred while creating the cluster and the nodes will be cleaned up. Please wait...
An error occurred while creating the cluster and the nodes will be cleaned up. Please wait...
There was an error cleaning up the cluster nodes. Use Clear-ClusterNode to manually clean up the nodes.
There was an error cleaning up the cluster nodes. Use Clear-ClusterNode to manually clean up the nodes.
An error occurred while creating the cluster.
An error occurred creating cluster 'FailoverCluster'.
This operation returned because the timeout period expired
To troubleshoot cluster creation problems, run the Validate a Configuration wizard on the servers you want to cluster.
While creating cluster I am getting this error? Any solution please.
Thank YouDid you follow the instruction "To troubleshoot cluster creation problems, run the Validate a Configuration wizard on the servers you want to cluster"? Any warnings/errors?
. : | : . : | : . tim -
Windows 2008 Failover Cluster - Cannot add a generic service
Trying to add a generic service in a failover cluster.
Select the option Services and Application and it opens the wizard and then displays the error "An error was encountered while loading the list of services. QueryServiceConfig failed. The system cannot find the file specified"
The cluster validation wizard completes successfully. Permissions do not appear to be an issue as this account can seemly do everything else so I am at a loss to understand why this API is failing when it tries to query the server for services information.
Having searched the Internet the only thing I have found was someone posting a similar issue in the Greek language Technet forum(if I recall correctly) and their comment was they rebuild their cluster.
Windows 2008 (SP2) x64 two node cluster running a non-Microsoft database. We need to add a non-Microsoft Enterpirse backup solution and this is their documented method (adding it as a generic service) - both bits of software are from big vendors.
Symantec AV, but have tried with that disabled so don't think it has anything to do with that. Something is stopping the API from reporting back but I can't find what.
Really appreciate some help before we have to log a chargable call with Microsoft support
Thank youHi,
Have you tried the suggestion? I want to see if the information provided was helpful. Your feedback is
very useful for the further research. Please feel free to let me know if you have addition questions.
Best regards,
Vincent Hu -
Hyper-V 2012 R2 Cluster Creation Fails
I am trying to create a 2 Node Hyper-v 2012 R2 Cluster. The Cluster Validation passes with no errors or warnings but the the cluster creation fails.
The error is similar to
here .
In this case he solved it by joining the Nodes to a Windows 2012 Domain. We don't have that option in our environment.
In the System Logs Events 7024 The cluster service terminated... The cluster join operation failed, and 7031 Cluster Services Terminated unexpectedly.
Anyone have an idea?
ToddHi Todd,
For troubleshooting , please try to create a new OU then move cluster nodes computer to that new OU then block inheritance , restart the nodes .
After this try to use domain admin account logon the cluster nodes to build cluster again .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .
Maybe you are looking for
-
Hi, as an Aperture newbie I am looking for a way to resize images in Aperture. Ie, the equivalent to Photoshop CS2's 'Image>Image Size', which allows me to, for example, just increase the pixels per inch of an image. For example I have been doing thi
-
Could not complete your request because of missing or invalid personal information.
After installing Photoshop Elements in osx 10.6.4 I try to launch and receive the error "Could not complete your request because of missing or invalid personal information." I have deleted and re-installed with the same results.
-
Is it possible to authenticate Users with the EAP-TLS mechanism against a ACS Server coupled with a Novell eDirectory? Are there any limitations?
-
Hi! Do java support DDE-server communication? If it does can you please breafly explain how to...... If it does in what package is it and what classes are the most "interresting"? Many thanks in advance! Marcus
-
How to query for unacceptable characters
Hi there. I can query for acceptable characters but would like to query for unacceptable characters. Please see the below thread. thanks in advance! How to find Special Characters in a table ? ~Darby