Clustering and deployment user setup

Hi,
I would like to install 2 instances of OC4J on the same middle tier host machine. One instance is for our development environment and the other instance is for pre-production. I have installed 9.0.2.1 Infrastructure on the box. After I install both instances of OC4J, do I need to cluster them ? I want each instance of OC4J to run independently but use the same infrastructure.
Also for the development box, how can I set up a user account that only allows developers to hot deploy their applications from JDeveloper to the middle tier OC4J development instance ? I do not want to give them the ias_admin account since it also allows them to configure the instance.
Any help would be appreciated.

Hi Niel,
Thanks for your reply.
It took awhile to get back to you with the forum update then having to locate the post.
Anyway, I tried what you say but the system would freeze after logging into the new user requiring a forced restart by power button. Then logging into the original admin acct to use the computer.
Obviously I did something wrong.
What I did:
1. Copy admin user folder to shared
2. Create new acct with admin rights
3. Log out then log into new acct
4. Rename new user home by adding a 2 to the end
5. Copy admin user folder from shared to new user
6. Rename original admin folder as the new user home folder
I suspect #6 is where I went wrong, that or improper renaming?
Maybe I should only copy over the SUB folders from admin to new user?
Thanks

Similar Messages

Deploying Custom Windows 7 Logon page and switch user button

I am trying to use ZCM 11 Group Policy management to do two things. 1). Turn off the Windows 7 switch user feature that exists in the start menu and at the initial logon screen, and 2). Add a policy statement graphic to the initial logon screen in Windows 7.
Feature 1 above is done by changing 'Hide entry points for 'Fast User Switching' in Computer Configuration=>Administrative Templates=>System=>Logon. But in order to get rid of the 'Switch User' button on the initial logon screen you also have to enable 'Interactive logon: Do not display last user name' in Computer Configuration=>Windows Settings=>Security Settings=>Local Policies=>Security Options and we only want this enabled for students. There are only two options for this setting - 'enabled' and 'disabled'.
Feature 2, adding a graphic to the initial logon screen, is turned on by enabling 'Always use custom logon background' in Computer Configuration=>Administrative Templates=>System=>Logon and creating a custom bmp file placed in C:\Windows\System32\oobe\info\.
Because the 'Interactive logon: Do not display last user name' setting only has enable/disable options (the default is disable) and because user associated settings overwrite workstation associations Im using two policies, one workstation and one user as inidcated below:
User GPO :
Enable 'Interactive logon: Do not display last user name' in Computer Configuration=>Windows Settings=>Security Settings=>Local Policies=>Security Options
NOTE: This allows me to differentiate between student and staff users.
Workstation GPO:
Enable 'Hide entry points for 'Fast User Switching' in Computer Configuration=>Administrative Templates=>System=>Logon
Enable 'Always use custom logon background' in Computer Configuration=>Administrative Templates=>System=>Logon
Bundle:
Deploys the bmp file to C:\Windows\System32\oobe\info\.
Unfortunately, this setup only works as intended when the user is set up with a volatile DLU policy. When the user associated DLU is non-volatile it doesnt display the graphic and it does not remove the switch user button on the main logon screen. If I logon/logoff as a non-volatile user I get the generic Windows 7 logon page with the switch user button visible, when I logon/logoff as a volatile user I get the custom graphic logon page without the switch user button. Whats even stranger is that when I go into gpedit.msc and look at the settings after I log in, theyre correct for each type of user.
Does anyone have any insight on why I might be seeing this problem?
Ive tried to be complete as possible describing the problem but if didnt describe something correctly or someone needs additional info, please let me know.
Thanks for any assistance.
Dan

Hi Dan,
are you using Novell CLient?
The Tiles on the Login Screen also depend on the Client configuration. If there is only Novell CLient active Windows cannot display other tiles or switch user.
regards
MArkus
Originally Posted by dlietz
I am trying to use ZCM 11 Group Policy management to do two things. 1). Turn off the Windows 7 switch user feature that exists in the start menu and at the initial logon screen, and 2). Add a policy statement graphic to the initial logon screen in Windows 7.
Feature 1 above is done by changing 'Hide entry points for 'Fast User Switching' in Computer Configuration=>Administrative Templates=>System=>Logon. But in order to get rid of the 'Switch User' button on the initial logon screen you also have to enable 'Interactive logon: Do not display last user name' in Computer Configuration=>Windows Settings=>Security Settings=>Local Policies=>Security Options and we only want this enabled for students. There are only two options for this setting - 'enabled' and 'disabled'.
Feature 2, adding a graphic to the initial logon screen, is turned on by enabling 'Always use custom logon background' in Computer Configuration=>Administrative Templates=>System=>Logon and creating a custom bmp file placed in C:\Windows\System32\oobe\info\.
Because the 'Interactive logon: Do not display last user name' setting only has enable/disable options (the default is disable) and because user associated settings overwrite workstation associations Im using two policies, one workstation and one user as inidcated below:
User GPO :
Enable 'Interactive logon: Do not display last user name' in Computer Configuration=>Windows Settings=>Security Settings=>Local Policies=>Security Options
NOTE: This allows me to differentiate between student and staff users.
Workstation GPO:
Enable 'Hide entry points for 'Fast User Switching' in Computer Configuration=>Administrative Templates=>System=>Logon
Enable 'Always use custom logon background' in Computer Configuration=>Administrative Templates=>System=>Logon
Bundle:
Deploys the bmp file to C:\Windows\System32\oobe\info\.
Unfortunately, this setup only works as intended when the user is set up with a volatile DLU policy. When the user associated DLU is non-volatile it doesnt display the graphic and it does not remove the switch user button on the main logon screen. If I logon/logoff as a non-volatile user I get the generic Windows 7 logon page with the switch user button visible, when I logon/logoff as a volatile user I get the custom graphic logon page without the switch user button. Whats even stranger is that when I go into gpedit.msc and look at the settings after I log in, theyre correct for each type of user.
Does anyone have any insight on why I might be seeing this problem?
Ive tried to be complete as possible describing the problem but if didnt describe something correctly or someone needs additional info, please let me know.
Thanks for any assistance.
Dan

VS 2010 Pro "Other Project Types" / "Setup and Deployment": No items found

Hello,
I have VS 2010 Pro Version 10.0.40219.1 SP1 Rel. I have developed a VB.Net application and would like to deploy it. When I try to add a setup project to the solution, I get "No items found" where a list of project types should be in the "Add New Project"
dialog, "Installed Templates", "Other Project Types", "Setup and Deployment". Shouldn't the Pro version have those templates installed? If so, can I copy them from somewhere? I noticed that "Database" and "Test Projects" also have empty lists. There are lots
of templates available for the various languages.
I tried to modify the VS 2010 installation by adding support for SharePoint, but that did not help. Do I have to uninstall, reboot, and re-install? It's so cumbersome considering that I would need to redo the updates as well.
OS is Win 7 Pro, processor is Intel E8400.
Thanks!
r4

Hi robertrackl,
Thanks for your post.
The Setup Project template is located in: Installed Templates >> Other Project Types >> Setup and Deployment >> Visual Studio Installer. Would you please check if the templates exists in this path?
If not, you can follow the steps below to reset your Visual Studio templates:
Please open Windows Explorer, and navigate to <Visual Studio Installation Path>\Common7\IDE
(by default is C:\Program Files \Microsoft Visual Studio 10.0\Common7\IDE);
Delete the ItemTemplatesCache, ProjectTemplatesCache
folder;
Open Visual Studio Command Prompt (2010) under Start menu -> All Programs -> Microsoft Visual Studio 2010 -> Visual Studio Tools (run it with Administrator privilege: right-click the program -> Run as administrator);
Run the devenv /InstallVSTemplates switch;
Run the devenv /Setup switch.
If you have any concerns, please feel free to let me know.
Best Regards,
Andrew Wu [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

How to create a special view for sharepoint list A and deploy this view to specific user personal view?

How to create a public view for sharepoint list A and deploy this view to specific user personal view? Is that possible OOTB?

Views cannot be exported or moved. Can you elaborate your requirement?
--Cheers

When deploying the new CU4 x64 and x86 users see that the install is happening. How do I prevent them from seeing this?

When deploying the new CU4 x64 and x86 users see that the install is happening. How do I prevent them from seeing this?
Thanks
James A+, Network+, MCP

If the program settings are set to hidden, it should be hidden. You do not need to specify any client settings. If you changed the program settings and the machines already had policy, you will have to wait up to your 60 minute policy setting or just manually
kick off a policy update to see the new hidden program.
If they are still getting the interactive install, then you need to troubleshoot if the machine has gotten proper policy. Run a 'Machine policy retrieval and evaluation cycle' manually, wait a few minutes and then test again.
Suppress program notifications are the tray icons and bubble notifications about installations happening. Hidden is the method in which the executable/msi will install.
Daniel Ratliff | http://www.PotentEngineer.com |
@PotentEngineer

Setup and Deployment Error

hello
i have vs express 2013 for desktop and w8.1 pro os.i want Setup and Deployment package but give me
error

I'm not sure, but I suspect Visual Studio 2013 Express doesn't support Setup and Deployment.
I suggest you remove Visual Studio Express and use Visual Studio 2013 Community Edition instead. It has Express features and much, much more. And it's free.

How to configure and deploy OAM 11g with DB setup using silent mode

Hello all,
I am trying to create automation process to install and configure OAM 11g on WLS. This task involves three stages
1. Install WLS
2. Install OAM 11g
3. Create DB schema using RCU
4. Configure and deploy OAM 11g
I have done first 3 stages in silent mode using scripts and response files. I am stuck at 4th stage. I know how to configure and deploy OAM 11g using config.sh via GUI installer as well as console mode. But I would like to run config.sh in silent mode something like
./config.sh -mode=silent -silent_script=<script_location>
I have searched a lot, but could not find any resource on how to do it? I tried passing the parameters via a text file. But that has not worked. I have also explored WLST, but it also does not work. Given that first 3 things are relatively very simple, the 4th step is becoming complex. I would be very thankful if someone can please point me in the right direction.
Thanks!

Have a look at your software directory : <sofware directory>/Disk1/stage/Response
Here you will find 2 rsp files which you can use to install and then configure it all.
Good luck.
Filip

Building and Deploying Within a Directory ?

Hi Guys,
Iv just been going through the "Oracle9iAS Containers for J2EE Users Guide, Release 2 (9.0.2)" pdf and have juts gone through the Building and Deploying within a directory.
This is something, as a developer I would love or even demand to be able to do as createing war , jar and ear files each time I make a change is a total time nightmare...
Unfortunately I was'nt able to get the above working with a very simple app.
Before trying the app I made sure I could deploy it normally as a an ear file which worked.
Below follows a description of the dir structure plus info added to relavent .xml files ( gods theres so many )..
j2ee/home/applications/BalanceManager
WebModule/
WEB-INF/
lib/
classes/
web.xml
AccountHolders.jsp
META-INF
EJBModule/
META-INF/
application.xml
application.xml ( not the one in config dir but the one in the above dir struct, ear application.xml) :-
<application>
<display-name>BM</display-name>
<module>
<ejb>EJBModule</ejb>
</module>
<module>
<web>
<web-uri>WebModule</web-uri>
<context-root>BM</context-root>
</web>
</module>
</application>
server.xml ( in j2ee/home/config )
<application name="BM" path="../applications/BalanceManager" auto-start="true" />
http-web-site.xml:-
<web-app application="BM" name="BalanceManager/WebModule" root="/BM" />
The above files have been edited as of the document above, which can also be found at http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/web.902/a95880.pdf.
When I start up OC4J the application gets deployed ( dos prompt ):-
C:\devenv\oc4j\j2ee\home>java -jar oc4j.jar
Auto-deploying BM (New server version detected)...
Copying default deployment descriptor from archive at C:
pplications\BalanceManager\BaEJBModule/META-INF/orion-ej
directory C:\devenv\oc4j\j2ee\home\application-deploymen
Auto-deploying BaEJBModule (No previous deployment found
Auto-deploying file:/C:/devenv/oc4j/j2ee/home/applicatio
odule/ (New server version detected)...
Oracle9iAS (9.0.2.0.0) Containers for J2EE initialized
and also a BM dir is created in the application-deployements dir.
So everything looks great, but when I navigate to -
http://localhost:8686/BM/AccountHolders.jsp
I get http 500 error page cannot be displayed.
So it looks like the context root BM did'nt get added to the servers web context,
but why??
Obviously AccountHolders.jsp is the jsp in the WebModule dir.
Iv been tweaking this and that and obviously tweaking never seems to work so if any ones got any ideas or suggestions on how to setup and deploy within dirs instead of ears please reply to me asap.
Look forward to your answers,
Stephen.

Stephen,
The entry in the http-web-site.xml should be:
<web-app application="BM" name="WebModule" root="/BM" />
This should be the name of the web-module in the application (EAR).
regards
Debu Panda
oracle

BAM Data Source and deployment setting in weblogic

like In db adapter we need to create datasource and deployment plan in weblogic. what I want to know is this same process is valid for BAM adapter also? If yes, what we will specify in baam data source (What configuration i need to give).
one more thing i noticed that, Outbound connection pool option is also not coming under BAM configuration
Please help!!
Thanks,

hello,
For BAM related settings are out of the box in web-logic server,here below points are describes steps to setup the Datasource whatever you call;
1. In the Settings for oracle-bam-adapter page, select the Configuration tab, and then the Outbound Connection Pools tab.
2. Configure the connection factory interface that you intend to use in Oracle JDeveloper, by expanding the appropriate Group and Instance target and clicking the Java Naming and Directory Interface (JNDI) name.
3. To configure the connection factory for RMI-based calls, click to expand the oracle.bam.adapter.adc.RMIConnectionFactory group and select the JNDI name that the user uses in Oracle JDeveloper. The eis/bam/rmi connection factory is provided out of the box.
4. To configure the connection factory for SOAP-based calls, click to expand the oracle.bam.adapter.adc.SOAPConnectionFactory group and select the JNDI name that the user uses in Oracle JDeveloper. The eis/bam/soap connection factory is provided out of the box.
Hostname : local host (host name of BAM server)
Instance Name: ADCServer1 (default for RMI)
Password : welcome1 (password of BAM server)
Port Number : 9001(port number of BAM server)
Username : weblogic (user name of BAM server)
5. after saving it need to re-deploy OracleBAMAdaper, In deployments select OracleBAMAdapter click Update button.
I hope these steps are helpful.
PS Outbound connection pool option is also not coming under BAM configuration -- for this check BAM server is running or not or any other BAM server installation or ect.
Thanks
Siva Sankar
TechDemocracy

Distributing a deployment.config and deployment.properties for proxy settings.

I am trying to define the minimum config required to populate a deployment.properties with just proxy settings and point to this with a deployment.config.
I am finding that that recent versions of 1.7 and 1.8 do not adhere to the browsers settings properly and not all traffic is following the proxy rules in use by the browser. However, if I manually override all traffic to a proxy the applets running on internet based sites function (no intranet sites use java here). If I use a deployment.config, I can see the resulting proxy settings are enabled in the control panel app and the appear exactly the same as per user manual settings, however they are not correctly used.have any ideas?
Any one have any ideas?.
Thanks

Hi Kevin,
I am actually working on the same problem.
I need to deploy Java 1.4.2_07 on clients with a mandatory setup. I tryied the deployment.config and deployment.properties file but didn't get it working yet.
I guess we should share knowledge to find a working solution.
It would be nice, if you could email me at:
[email protected]
regards,
Volker

NAC VL3 in-band for VPN users Setup

We have the setup configured as per Sample in-band for VPN clients configured.
Currently all our clients authenticating successfully, however when they open their IE, they don't get a NAC Agent page?
What are some of the places where I should start to look into for troubleshooting??
Thank you,
Dev

Multi-hop L3 support for in-band (wired) deployments enables administrators to deploy the Clean Access Server (CAS) in-band centrally (in core or distribution layer) to support users behind L3 Switches (e.g. routed access) and remote users behind VPN Concentrators or remote WAN routers.With L3 IB, users more than one L3 hop away from the CAS are supported and their traffic always goes through Cisco NAC Appliance.
Make sure the below compatibility.
ActiveX/Java Applet and Browser Compatibility
â¢ ActiveX is supported on IE 6.0 for Windows XP and Windows 2000 systems.
â¢ IE 7.0 Beta is not supported when the Clean Access Agent is installed. For the Agent to login and perform other operations, users must uninstall IE 7.0 Beta 2.
â¢ Java applets are supported for major browsers including Safari 1.2+, Mozilla (Camino, Opera), and Internet Explorer on Windows XP, Windows 2000, Mac OS X, and Linux operating systems.
â¢ Due to Firefox issues with Java, Java applets are not supported for Firefox on Mac OS X.
For further information click this link.
http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/411/cas411/s_L3oob.html

1.4.2 using deployment.config and deployment.properties

Can anyone tell me if JRE 1.4.2_06 can use the deployment.config and deployment.properties setting like ver 1.5.0 can?
I have to use 1.4.2_06 and need to have the cache point to a common location (vs per user) and also would like to preset the cache size on an install.
This works perfectly on 1.5.0 however, my app requires 1.4.2.
Can anyone point in a direction?
Thanks
Kevin

Hi Kevin,
I am actually working on the same problem.
I need to deploy Java 1.4.2_07 on clients with a mandatory setup. I tryied the deployment.config and deployment.properties file but didn't get it working yet.
I guess we should share knowledge to find a working solution.
It would be nice, if you could email me at:
[email protected]
regards,
Volker

WLS: Several ManagedServer without clustering and same activities

Hi all,
I have a request for special solution for several ManagedServer without clustering and same activities (e.g. SOA or OSB).
In classic case, we have for example 1 AdminServer + 1 ManagedServer (SOA, or OSB). If we want to increase number of SOA-Managedserver, then we add other managed server in WLS-cluster.
In this case, we want to have several "Independent" ManagedServer with different port number and without cluaster but in same domain.
In addition, because we don't want to impact any project in one managed server to other managed server, we need to define different URL:ports for administration: For example: OSB has following URL:
http://localhost:7001/sbconsole
Is it possible to define other ports for other OSB-managed server? e.g. http://localhost:7003/sbconsole, http://localhost:7004/sbconsole
I would like to know, if any experience is available regarding this matter.
Thanks inadvance,
Moh

Hi Moh
1. There are few things that should be clear about the Weblogic Domain and Weblogic Cluster Architecture.
2. Any Weblogic Domain whether its Clustered or Non Clustered will have ONLY ONE Single AdminServer. You CANNOT have more than one AdminServer. Now for Cluster, you can have "n" number of Managed Servers and "n" number of Clusters. Each Cluster is just like a logical grouping of some managed servers. BUT main thing is, if you want to have High Availability architecture to support load balancing, fail over etc, you should and must have a Cluster with managed servers. And expose this Clustered Weblogic Servers into some sort of load balancer like Apace WebServer. Then expose single Apache Web Server URL (host, port + app url) to outside world. General practice is for HA architecture, you do not expose individual managed servers.
3. So coming to your requirement, you can have "n" number of managed servers. And each managed server can deploy their own specific application. And these managed servers naturally will have different port numbers, if they are all on the same physical box. If they are on different boxes, there is no clash of port numbers. Then in front end apache web server, check for each in coming request url and according direct that to appropriate backend weblogic server. This is good but you will NOT get any HA features going in this way. Instead of exposing individual managed servers, I would recommend just create a cluster for each one of them. And expose cluster. For now each cluster can have only 1 manged severs. Later on you can add more also. This gives you HA features. Something like this for example:
Domain = Single Domain
AdminServer = 1 AdminServer only. Not possible more then one.
ManagedServers = 4 (MS1, MS2, MS3, MS4)
Cluster1 = MS1, MS2 -> Deploy App1
Cluster2 = MS3 -> Deploy App2
Cluster3 = MS4 -> Deploy App3
Have a SINGLE Apache WebServer or any other Hard ware load balancer (Apache is free and widely used). Expose this host, port to outside world or actual users (outside or inside). In Apache httpd.conf file, configure like 3 settings, to check for incoming urls and redirect to back end cluster 1 or 2 or 3. Refer docs for full details.
Requests coming to Apache WebServer can use incoming url pattern and pass the request to appropriate backend cluster
http://apachehost:apachport/myApp1 -> Redirect to Cluster1
http://apachehost:apachport/myApp2 -> Redirect to Cluster2
http://apachehost:apachport/myApp3 -> Redirect to Cluster3
Now this gives you full flexibility to add or remove more servers from any of above Clusters. Even if you have single managed server, try to put that into cluster and expose the cluster.
4. Now comes the Adminstration applications like console, sbconsole, em (Enterprise Manager for SOA), cs (Content Server for ECM) etc. All these are deployed only to AdminServer and it makes sense also. Say in above architecture only AdminServer can have visibility to all the managed servers and clusters. Each managed server may not know about the others. Anyhow, the point is, for any Domain you will have only 1 AdminServer and most of the adminstration applications are deployed only to AdminServer. This means literally you will have just one url to control all the applications across all the clusters like http://adminhost:adminport/sbconsole. I am not familiar with sbconole, but for em I am sure its only targetted to admin server. Now, if you manually target these apps to cluster, not sure if this works also. Mostly it may not.
Also, admin urls are not exposed to any users. Only Adminstrators can access them. You can refine some rules like have very few admins with full privileges. Some can do only deployments, some can do only monitoring (read only access) etc.
Thanks
Ravi Jegga

PROBLEMS SETTING UP EMAILS AS DEVICE REFUSES TO RECOGNISE PASSWORD AND/OR USER NAME

PROBLEMS SETTING UP EMAILS AS DEVICE REFUSES TO RECOGNISE PASSWORD AND/OR USER NAME
My 9800 ( I have 2 - one spare ) is driving me nuts- will not let me set up email accounts from my other Curve model.
Repeatedly told that either user name or details are wrong, yet they are RIGHT on website.
Exasperated
Help please??
Fair winds and kind landfalls

Thank you- I have read through that thread and can see some resonance with my issue.
My AOL emails work VERY fast with BB, in fact almost simultaneously received on PC & Torch " ping ping!"
This issue only raised its ugly head when I had 2 Torches replaced by my insurers.
Whilst the claim was in process I used a new Curve, loaded from backup on PC to keep emails going and of course phone & web facilities. ( I use the BB to power internet via bluetooth to my PC / laptop when living on a remote island with no phone lines or power supplies) All was fine. Swapping email accounts took a few minutes with the usual password confirmations for each AOL screenname etc.
Then the new Torches came back from insurers, and I tried to swap devices. Phoning & texting is fine. Al data and contacts swap over fine.
SETUP email accounts.............stymied every time. It says repeatedly that my user name/password is invalid etc etc etc
Have tried security wipes. Have tried setting up new BB ID & passwords on PC website. All is OK until I try to setup emails on the Torches. This has used up ridiculous amounts of time- all wasted.
I love the BB phones and the fast email push......in fact I recently bought a new Sony Xperia Z1 but sent it back because of wifi coverage meant no emails on that superb phone for lots of the time.
Good old BB I said..........I always get emails wherever I am. ( Rural Scotland has very patchy radio & wifi coverage)
Was about to purchase new Z10s just to get a bigger screen, but now I am averse to buying ANY BB phone again because this present mess means I may never get emails set up again. How nuts is that?
Many thanks for all help & suggestions..........boy do I need them!!
Kind wishes from West of Scotland
Fair winds and kind landfalls

Is there any way to back up a preconfigured iPad and deploy to new iPads using Configurator??

To clarify, we have about 100 ipads deployed in our district and lots more on the way. We had just used iTunes in the past to backup one master device with the apps and restored on the remaining sets of iPads. Obviously we wanted a simpler way to manage this as we are getting a lot more iPads coming in for use in the different schools. We got a MDM solution (Casper) and started using Configurator.
We are running the latest of Configurator (1.4.2) and IOS (7.0.4).
From what I have read (and a lot at that) I know that there are numerous issues with this setup (hopefully addressed very soon)
Here is my question:
Is it possible to take an already deployed device, loaded with apps (paid and free), back it up in Configurator, and deploy it to other iPads and still get all the apps to come down along with the restore?
Apparently this was possible in the past, I am just wondering if I am missing something. Any help or suggestions on how you are doing it would be very helpful
Oh, and to clarify, we are using VPP for the apps, just not managing them any where at this time, haven't decided the best tool for that, maybe casper maybe configurator, but we are compliant, only using the same quantity of apps that we have purchased.
Thanks
Edit: spelling error

I've heard if you contact your apple rep, Apple may restore your vpp codes so you can move to an MDM.
Read the Google doc below and nsdjoey write up.
IT Resources -- ios & OS X -- This is a fantastic web page. I like the education site over the business site.
View documentation, video tutorials, and web pages to help IT professionals develop and deploy education solutions.
    http://www.apple.com/education/ipad/resources/
    scroll down after all the pretty picture. Click on the words "For It".
Joe Rowe's Excellent guides
IT managers who are new to configurator and managing a cart of ios devices:
      https://docs.google.com/document/d/1SMBgyzONxcx6_FswgkW9XYLpA4oCt_2y1uw9ceMZ9F4/ edit?pli=1
         [ original announcement -- https://discussions.apple.com/thread/4256735?tstart=0 ]
Quick help presentation for students:
     https://docs.google.com/presentation/d/18937JdleX2gymtSb8zfbDczV-76BdR2DIfCV9eJi yOE/edit#slide=id.g1b776944_0_224
good tips for initial deployment:
https://discussions.apple.com/message/18942350#18942350
https://discussions.apple.com/thread/3804209?tstart=0
See nsdjoey writeup. See third post.
https://discussions.apple.com/message/22286109#22286109
"Deploying a great quantity of iOS devices means creating a great quantity of Apple IDs. This script allows automated Apple ID creation from a spreadsheet."
http://www.enterpriseios.com/wiki/Apple_ID_Automation_Builder

Clustering and deployment user setup

Similar Messages

Maybe you are looking for