CME Invalid ITS Command Option

I'm trying to add an extension to my Cisco Call Manager Express and when I go to save it i get Invalid ITS command option. Has anyone come across this? What is the fix?

or if you have logout profiles active on the phone remove it.

Similar Messages

Unity Express - Invalid ITS command option

when I try to add another extension to the phone. The error msg pop up "Configuration change failed. Please report the following error: Invalid ITS command option"

Hi, for Unity questions, try www.answermonkey.com, which I believe now links to Cisco Unity forums.

Why am I getting this error message in SQL Developer-ORA-01735: invalid ALTER TABLE OPTION?

To Whom it may Concern,
I am attempting to add two columns Comm_id and Ben_id to a table in SQL Developer (Oracle).
Here is the syntax I am using:
ALTER TABLE ACCTMANAGER
ADD (Comm_id NUMBER(10)),
Ben_id VARCHAR(2);
The spool file I'm getting as a result of the script above:
Error starting at line 1 in command:
ALTER TABLE ACCTMANAGER
ADD (Comm_id NUMBER(10)),
Ben_id VARCHAR(2)
Error report:
SQL Error: ORA-01735: invalid ALTER TABLE option
01735. 00000 - "invalid ALTER TABLE option"
*Cause:
*Action:
DESC acctmanager
Thank you in advance.

4b60e01f-2ea5-40fe-a161-fc12d38d09e5 wrote:
To Whom it may Concern,
I am attempting to add two columns Comm_id and Ben_id to a table in SQL Developer (Oracle).
Here is the syntax I am using:
ALTER TABLE ACCTMANAGER
ADD (Comm_id NUMBER(10)),
Ben_id VARCHAR(2);
The spool file I'm getting as a result of the script above:
Error starting at line 1 in command:
ALTER TABLE ACCTMANAGER
ADD (Comm_id NUMBER(10)),
Ben_id VARCHAR(2)
Error report:
SQL Error: ORA-01735: invalid ALTER TABLE option
01735. 00000 - "invalid ALTER TABLE option"
*Cause:
*Action:
DESC acctmanager
Thank you in advance.
try as below instead
ALTER TABLE ACCTMANAGER
ADD (Comm_id NUMBER(10), Ben_id VARCHAR(2));

When I click on iPhoto icon I get a box that reads "The photo library needs to be upgraded to work with this version of iPhoto." Whether I hit Quit or Upgrade the problem is not fixed. Any suggestions? Yes, I have tried Command Option iPhoto..no luck.

When I click on iPhoto icon I get a box that reads "The photo library needs to be upgraded to work with this version of iPhoto." Whether I hit Quit or Upgrade the problem is not fixed. Any suggestions? Yes, I have tried Command Option iPhoto..no luck. I think I may have hit Upgrade the first time. I really need this to be fixed ASAP. Thanks for your help.

Assuming iPhoto 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

HT3309 One User on my iMac seems to be disabled. When I log onto that User the desktop appears empty and only half of the programs appear on the operating bar. I cannot open any program and nothing works. I have to use Command/Option/Esc to restart the

I cannot access one user on my iMac. When I log onto that user the dekstop appears unpopulated and blank and half of the programs do not appear on the operating bar. When I attempt to click on a program such as Safari nothing happens. Nothing works and I can only exit by doing a command/option/esc and restarting the computer. The other user and the Administrator work fine. What has disabled the one user? How do I recover this user and its files?

No.. I have been through parental control and it does not affect this problem. Now if I log onto this user I cannot get out even with a comman/option/escape; I have to unplug the power to the computer to get it to restart with the administrator. I saw somewhere that there is a process in which I can delete the use and then create a new user with the same name and password and then recover everything - but I cannot find that solution. This is a real problem for me, as you might imagine.

[wvdial, ppp] ATDT invalid dial command

Strange problem. I can't go on the internet since I made a pacman -Su. There's a problem with ppp or something in the arch configuration (modules??).
I have a serial external hardware modem that had always worked easily, BUT now wvdial cannot connect. The problem does not come from wvdial, I'm pretty sure of that.
[root@myhost fred]# wvdial
--> WvDial: Internet dialer version 1.60
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT5145992743
--> Waiting for carrier.
ATDT5145992743
ERROR
--> Invalid dial command.
--> Disconnecting at Sun Jun 1 15:44:18 2008
The only error I had doing the update was when compiling the new kernel26 (standard from arch). I had to remove "kermaps" in my mkinitcpio.conf because the hook keymaps was not found. After removing that, while keeping the old settings (my old mkinitcpio was not replaced during process, it made a .pacnew), everything went well.
Except now wvdial doesn't work. I have the same rc.conf than before, the same mkinitcpio was used and it keeped the same ppp settings or the wvdial.conf. Everything I could look at is like before except it's more up to date and my kernel is also newer, I have the last one, kernel26 package.
I tried all that :
-Reinstalling wvdial, wvstreams and ppp and deleting all config files in /etc/ppp, reinstalling them or replacing them with working ubuntu config files
-Deleting and rebuilding /etc/wvdial.conf, adding stupid mode on... but this file was not modified in process and it had always worked for me anyway...
-Tried to add in wvdial.conf DIAL COMMAND = ATDP (for pulse dialing) but it changed nothing
-tried rebulding the kernel with more options like (can't remember the exact name) adding the ppp module in mkinitcpio
Last edited by tandycorp (2008-06-07 20:54:08)

Here my /proc/modules
it looks fine: RTC and ppp_generic are there...
ipv6 256196 10 - Live 0xf8ca2000
nls_cp437 5888 1 - Live 0xf8aa6000
vfat 10880 1 - Live 0xf8aa2000
fat 45984 1 vfat, Live 0xf8ab1000
i2c_i801 9232 0 - Live 0xf8a80000
nvidia 7816704 0 - Live 0xf9356000 (P)
i2c_core 19348 2 i2c_i801,nvidia, Live 0xf8a9c000
intel_agp 23740 0 - Live 0xf8a95000
agpgart 28244 2 nvidia,intel_agp, Live 0xf8a8d000
pcspkr 2816 0 - Live 0xf88c9000
sg 27188 0 - Live 0xf8a85000
thermal 15260 0 - Live 0xf8a66000
evdev 9472 3 - Live 0xf8a6b000
processor 32096 1 thermal, Live 0xf8a72000
fan 4356 0 - Live 0xf8a63000
button 6416 0 - Live 0xf8a4c000
battery 10372 0 - Live 0xf893e000
ac 4484 0 - Live 0xf8a45000
ppp_generic 24348 0 - Live 0xf8a5c000
snd_hda_intel 336440 1 - Live 0xf8ac9000
snd_hwdep 7428 1 snd_hda_intel, Live 0xf8948000
snd_seq_oss 30336 0 - Live 0xf8a23000
snd_seq_midi_event 6656 1 snd_seq_oss, Live 0xf8945000
snd_seq 48432 4 snd_seq_oss,snd_seq_midi_event, Live 0xf8a4f000
snd_seq_device 6796 2 snd_seq_oss,snd_seq, Live 0xf8942000
snd_pcm_oss 38656 0 - Live 0xf8a18000
snd_pcm 68228 2 snd_hda_intel,snd_pcm_oss, Live 0xf8a2d000
snd_timer 19848 2 snd_seq,snd_pcm, Live 0xf8922000
snd_page_alloc 8072 2 snd_hda_intel,snd_pcm, Live 0xf892d000
snd_mixer_oss 14848 2 snd_pcm_oss, Live 0xf8928000
snd 46628 9 snd_hda_intel,snd_hwdep,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss, Live 0xf8931000
soundcore 6496 2 snd, Live 0xf88cd000
slhc 6016 1 ppp_generic, Live 0xf88d0000
rtc_cmos 9120 0 - Live 0xf891e000
rtc_core 15516 1 rtc_cmos, Live 0xf88d3000
rtc_lib 2944 1 rtc_core, Live 0xf88cb000
reiserfs 229760 1 - Live 0xf894d000
usbhid 42944 0 - Live 0xf8900000
hid 39168 1 usbhid, Live 0xf88d8000
ff_memless 5128 1 usbhid, Live 0xf8872000
sd_mod 23320 4 - Live 0xf885b000
sr_mod 15300 0 - Live 0xf886d000
cdrom 33952 1 sr_mod, Live 0xf8879000
ide_pci_generic 4228 0 [permanent], Live 0xf8858000
jmicron 2560 0 [permanent], Live 0xf8829000
ide_core 103584 2 ide_pci_generic,jmicron, Live 0xf88e5000
ehci_hcd 33804 0 - Live 0xf8863000
uhci_hcd 22288 0 - Live 0xf8835000
usbcore 129776 4 usbhid,ehci_hcd,uhci_hcd, Live 0xf88a8000
ata_piix 17668 3 - Live 0xf882f000
ata_generic 5636 0 - Live 0xf8824000
pata_jmicron 4224 0 - Live 0xf8821000
libata 141840 3 ata_piix,ata_generic,pata_jmicron, Live 0xf8884000
scsi_mod 92204 4 sg,sd_mod,sr_mod,libata, Live 0xf8840000
dock 7952 1 libata, Live 0xf881e000

My iPhoto images won't show, and Photo Library Repair will not open when I command-Option-click on the iPhoto icon.

Some of my iPhoto albums will not show, as below:
When I click on any of those individual albums, for a brief split second I can see the images displayed, but then they revert to this:
Then if I click on any of those images, this image appears:
I have real a lot of posts that say to click Command+Option while opening iPhoto and this will open the Photo Library Repair window, but... this is not happening. Each time I do it, iPhoto just opens as it normally does. I've tried about 10 times, closing iPhoto completely. I've tried through the dock icon and through the applications listing. Neither will open anything other than regular old iPhoto.
Can anyone help me and suggest what I may be doing wrong, or are there any alternative was to open Photo Library Repair so I can rebuild my library? I really don't want to lose all of those photos, especially since some are really important and irreplaceable.
Thanks.

I have real a lot of posts that say to click Command+Option while opening iPhoto and this will open the Photo Library Repair window, but... this is not happening.
Be sure you're holding the correct keys and that you're holding them long enough. Depress them before clicking on iPhoto and don't let go until the menu shows up.
If you don't want to lose those photos, make a back up now. Hopefully it's not too late.

Need to go into photo library to retrieve photos that technical support lost at the store. Told to do "command Option" at the same time - than click on "I-photo" then check the box "repair the i-photo library.... I have had two appointment at the store

How can i retrieve my photo library that got lost by your techs at the apple store?

First to locate your library on the hard drive launch iPhoto with the Option key held down so you get this window:
Your library should be displayed in the window and it's location displayed below the window when clicked on.
If that fails to locate your library download and run Find Any File to search for a file named "ThumbJPGSegment.data" which is a file common to all versions of iPhoto libraries.
FAF can search areas that Spotlight can't like invisible folders, system folders and packages. If there's a library hiding somewhere on your hard drive FAF will find it.
Once you find the library you can try to repair if it doesn't open as it should by trying this:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window.
2 - Run Option #4, Rebuild Database.
OT

Holding down the option key when booting my iMac lo longer shows me my bootable external drives, the system just boots up to the main system. Also, holding down command, option,P,R no longer zaps the p-ram. the system just boots up.

Holding down the option key when booting my iMac lo longer shows me my bootable external drives, the system just boots up to the main system. Also, holding down command, option,P,R no longer zaps the p-ram. the system just boots up normally. Why do these key fonctions no longer work?

It could be your timing if on a bluetooth keyboard. I find it best to hit the keys as soon as i hear the chime, release and hit them again but this time holding them before the chime ends....like a fake pump in football.
But....you can always open up system preferences, startup disk, and select your bootable clone for booting. If it doesn't show up there, the Mac doesn't think it's bootable.

Invalid value in OPTION field of value table for IN itab operator. operato

Hi,
I am working on SELECT-OPTIONS to accept single and multiple values for company code. I am using CREATE_RANGE_TABLE and ADD_SELECTION_FIELD and all is good but I was prompted with error "Invalid value in OPTION field of value table for IN itab operator. operator" when I enter 2 single value.
SIGN OPTION LOW HIGH
    |      |CN01|    |
    |      |SG02|    |
However, below combinations working good for me and I don't get the above error.
SIGN OPTION LOW HIGH
I   |BT   |CN01|CN02|
     |     |SG02|    |
SIGN OPTION LOW HIGH
     |     |SG02|    |
I am using below coding.
DATA:
    ls_cmp_restrictions TYPE if_wd_select_options=>t_complex_restrictions,
    ls_rsoptions        TYPE rsoptions.
CLEAR ls_rsoptions.
ls_rsoptions-bt = abap_true.
ls_rsoptions-cp = abap_false.
ls_rsoptions-eq = abap_true.   " for enable only single value*
ls_rsoptions-ge = abap_false.
ls_rsoptions-gt = abap_false.
ls_rsoptions-le = abap_false.
ls_rsoptions-lt = abap_false.
ls_rsoptions-nb = abap_false.
ls_rsoptions-ne = abap_false.
ls_rsoptions-np = abap_false.
ls_cmp_restrictions-m_exclude = ls_rsoptions.
CLEAR ls_rsoptions .
ls_rsoptions-bt = abap_true.
ls_rsoptions-cp = abap_false.
ls_rsoptions-eq = abap_true.   " for enable only single value*
ls_rsoptions-ge = abap_false.
ls_rsoptions-gt = abap_false.
ls_rsoptions-le = abap_false.
ls_rsoptions-lt = abap_false.
ls_rsoptions-nb = abap_false.
ls_rsoptions-ne = abap_false.
ls_rsoptions-np = abap_false.
ls_cmp_restrictions-m_include = ls_rsoptions.
* Create a reference to range table
lr_field = wd_this->m_helper->create_range_table( `BUKRS` ).
* Add the select-option to the group
wd_this->m_helper->add_selection_field(
    i_id                         = `BUKRS`
    i_value_help_structure       = 'P0001'
    i_value_help_structure_field = 'BUKRS'
    it_result                    = lr_field
    i_no_intervals               = abap_true
    i_no_extension               = abap_false
    i_complex_restrictions       = ls_cmp_restrictions
    i_use_complex_restriction    = abap_true ).
FREE lr_field.
Edited by: Girish Nabar on Jul 22, 2011 12:35 PM

Hi Girish,
People are answering not for points, just to share the knowledge.
And I think the way of structure is wrong. i think we cannot pass two single values in your way. am not sure about .
low means it will accept single value. for one record in sign structure.
wait for other replys.
Regards
Srinivas

Wildcarrd character in file communication channel ( Run OS Command Option )

We have problem while executing the "move ( MV ) " command with wildcard character ( '*' ) in file communication channel (Run Operating System command option ). Command is not executing properly.
e.g. mv /archive/test* /output/
have anyone experienced the same problem ?
Thanks & Regards,
Dijesh Tanna.

As far as i know, that doesnt work.
In Unix environment, the below code will work
name=`test*`
target=`xxxfolder`
file_list=`find $name -type f`
for fname in $file_list ; do
echo "Moving: " $fname
mv -Eignore $fname $target
done
Edited by: Praveen Gujjeti on Apr 12, 2010 5:44 PM
Edited by: Praveen Gujjeti on Apr 12, 2010 5:46 PM

How to configure File Adapter along with OS command option

Hello,
I want to configure a scenario using File Adapter with OS command option.
How to use that option in channel configuration of File Adapter.
What is the default path where it is actually runs this OS command?
Thanks,
Soorya

>
surya venkat wrote:
> Hello,
> I want to configure a scenario using File Adapter with OS command option.
> How to use that option in channel configuration of File Adapter.
There are two ways to use the Os command in the file adapter.
Lets talk about the sender File Adapter.
First: Run operative system Before Message Processing
Whenever any operation needs to be performed uppon the source file Just before XI picks it up.
e.g. Calculate any hash code, backup the file to a given location, create a log at os level, etc...
... After Message Processing
After Xi has processed the message, you can trigger a new os level command:
e.g. Trigger a mail, check if the archiving was successful, etc.
> What is the default path where it is actually runs this OS command?
>
Theres no default path, you assign the desired path in the Comm Channel configuration.
> Thanks,
> Soorya
I hope it helps.

Force quit command option esc does not work in snow leopard

When I try to use this command I am sent to front row. I can force quit throught the apple menu. This began when I upgraded to Snow Leopard.

This might clear up some wierd inputs:
PRAM RESET
Zap the PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Command, option, ctrl, fn keys not working

thanks to a visiting dog who got tangled up the power adapter my laptop ended up on the floor, wide open with the keyboard popped out. I have inspected the connector cable and it looks OK to the naked eye. I disconnected the keyboard cable and re-connected.
When using an external USB keyboard all keys function normally. When using the built-in keyboard the only keys not working are the command, option, ctrl and fn keys. I have restored modifier keys to default (I had never changed them) but this did not help. I also toggled the "use F1-F12 to control..." option in the keyboard preferences to no avail and have restored keyboard shortcuts to no avail.
Is my keyboard shot? Is the a pref file I might delete?

Hi, Mel. If the external keyboard works properly, I'm afraid you have to figure your built-in KB has been dogged to death. I hope the pet owner will do the right thing by you. I also hope the KB is all that was damaged. How are your adapter cord, plug, and DC-In port? Does your battery still charge OK?
Whenever anything visits my house that's active, inattentive, and built low to the ground, my Powerbook runs on battery power only. I haven't seen one yet, but the new magnetically-connected, easily- and harmlessly-detached MacBook Pro AC adapters sound like a superb idea to me. Too bad our PBs can't use 'em.

Left side shift/command/option keys not working

I have a 2010 11" macbook air and out of nowhere my left side Shift Command Option keys are not working at all. Anyone had this issue? or know what I can do to solve it?
I have tried connecting my keyboard to it and doing the reset PRAM, SMC, PMU with no luck. I tried installing new Mountain Lion OSX hoping it was a software issue and it is still not working.

I had a key fail on my MBA and the problem progressed to other keys. It turned out to be the electoonics in the keyboard, not the individual keys. When it progressed to W, I had to replace it;) Given you have two keys failing at once it could be a similar problem.

CME Invalid ITS Command Option

Similar Messages

Maybe you are looking for