Cme to cme calls failing

Hi Everyone,
We have two branches (KA and MD) where until yesterday everything was working fine.
Since yesterday when we are calling to MD branch from KA branch only the phones are ringing but when we answer the call the calls are getting disconnected.
Ephone telephone numbers at Md branch are in the range of 40.. and at KA branch are in the range of 11.. and 12..  
It would be really helpful if you could find me a solution.
Please find the attached show run configuration of both the brnaches.Also let me know if you need any debugs for these configs.

I have removed the dial-peer 4000 and still the problem persists find the ccapi output after removing:
Madina-BR1-CME#
004821: Dec 30 11:49:10.974: //-1/FDE37900BEAA/CCAPI/cc_api_display_ie_subfields:
   cc_api_call_setup_ind_common:
   cisco-username=192.168.11.160
   ----- ccCallInfo IE subfields -----
   cisco-ani=
   cisco-anitype=0
   cisco-aniplan=0
   cisco-anipi=0
   cisco-anisi=0
   dest=4034
   cisco-desttype=0
   cisco-destplan=0
   cisco-rdie=FFFFFFFF
   cisco-rdn=
   cisco-rdntype=-1
   cisco-rdnplan=-1
   cisco-rdnpi=-1
   cisco-rdnsi=-1
   cisco-redirectreason=-1   fwd_final_type =0
   final_redirectNumber =
   hunt_group_timeout =0
004822: Dec 30 11:49:10.974: //-1/FDE37900BEAA/CCAPI/cc_api_call_setup_ind_common:
   Interface=0x8786AC44, Call Info(
   Calling Number=,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
   Called Number=4034(TON=Unknown, NPI=Unknown),
   Calling Translated=FALSE, Subscriber Type Str=Unknown, FinalDestinationFlag=TRUE,
   Incoming Dial-peer=0, Progress Indication=NULL(0), Calling IE Present=FALSE,
   Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=2468
004823: Dec 30 11:49:10.974: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
004824: Dec 30 11:49:10.974: :cc_get_feature_vsa malloc success
004825: Dec 30 11:49:10.974: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
004826: Dec 30 11:49:10.974:  cc_get_feature_vsa count is 3
004827: Dec 30 11:49:10.974: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
004828: Dec 30 11:49:10.974: :FEATURE_VSA attributes are: feature_name:0,feature_time:2330252088,feature_id:2062
004829: Dec 30 11:49:10.974: //2468/FDE37900BEAA/CCAPI/cc_api_call_setup_ind_common:
   Set Up Event Sent;
   Call Info(Calling Number=(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
   Called Number=4034(TON=Unknown, NPI=Unknown))
004830: Dec 30 11:49:10.974: //2468/FDE37900BEAA/CCAPI/cc_process_call_setup_ind:
   Event=0x885EC860
004831: Dec 30 11:49:10.974: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search:
   Try with the demoted called number 4034
004832: Dec 30 11:49:10.974: //2468/FDE37900BEAA/CCAPI/ccCallSetContext:
   Context=0x8AE77D6C
004833: Dec 30 11:49:10.974: //2468/FDE37900BEAA/CCAPI/cc_process_call_setup_ind:
   >>>>CCAPI handed cid 2468 with tag 0 to app "_ManagedAppProcess_Default"
004834: Dec 30 11:49:10.978: //2468/FDE37900BEAA/CCAPI/ccCallProceeding:
   Progress Indication=NULL(0)
004835: Dec 30 11:49:10.978: //2468/FDE37900BEAA/CCAPI/ccCallSetupRequest:
   Destination=, Calling IE Present=FALSE, Mode=0,
   Outgoing Dial-peer=20004, Params=0x8AE7013C, Progress Indication=ORIGINATING SIDE IS NON ISDN(3)
004836: Dec 30 11:49:10.978: //2468/FDE37900BEAA/CCAPI/ccCheckClipClir:
   In: Calling Number=(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed)
004837: Dec 30 11:49:10.978: //2468/FDE37900BEAA/CCAPI/ccCheckClipClir:
   Out: Calling Number=(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed)
004838: Dec 30 11:49:10.978: //2468/FDE37900BEAA/CCAPI/ccCallSetupRequest:
   Destination Pattern=4034$, Called Number=4034, Digit Strip=TRUE
004839: Dec 30 11:49:10.978: //2468/FDE37900BEAA/CCAPI/ccCallSetupRequest:
   Calling Number=(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
   Called Number=4034(TON=Unknown, NPI=Unknown),
   Redirect Number=, Display Info=
   Account Number=192.168.11.160, Final Destination Flag=TRUE,
   Guid=FDE37900-7080-11E3-BEAA-EDB6A4A5D089, Outgoing Dial-peer=20004
004840: Dec 30 11:49:10.978: //2468/FDE37900BEAA/CCAPI/cc_api_display_ie_subfields:
   ccCallSetupRequest:
   cisco-username=192.168.11.160
   ----- ccCallInfo IE subfields -----
   cisco-ani=
   cisco-anitype=0
   cisco-aniplan=0
   cisco-anipi=0
   cisco-anisi=0
   dest=4034
   cisco-desttype=0
   cisco-destplan=0
   cisco-rdie=FFFFFFFF
   cisco-rdn=
   cisco-rdntype=-1
   cisco-rdnplan=-1
   cisco-rdnpi=-1
   cisco-rdnsi=-1
   cisco-redirectreason=-1   fwd_final_type =0
   final_redirectNumber =
   hunt_group_timeout =0
004841: Dec 30 11:49:10.978: //2468/FDE37900BEAA/CCAPI/ccIFCallSetupRequestPrivate:
   Interface=0x8966B7D4, Interface Type=6, Destination=, Mode=0x0,
   Call Params(Calling Number=,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
   Called Number=4034(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
   Subscriber Type Str=Unknown, FinalDestinationFlag=TRUE, Outgoing Dial-peer=20004, Call Count On=FALSE,
   Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Application Call Id=)
004842: Dec 30 11:49:10.978: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
004843: Dec 30 11:49:10.978: :cc_get_feature_vsa malloc success
004844: Dec 30 11:49:10.978: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
004845: Dec 30 11:49:10.978:  cc_get_feature_vsa count is 4
004846: Dec 30 11:49:10.978: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
004847: Dec 30 11:49:10.978: :FEATURE_VSA attributes are: feature_name:0,feature_time:2330248504,feature_id:2063
004848: Dec 30 11:49:10.982: //2469/FDE37900BEAA/CCAPI/ccIFCallSetupRequestPrivate:
   SPI Call Setup Request Is Success; Interface Type=6, FlowMode=1
004849: Dec 30 11:49:10.982: //2469/FDE37900BEAA/CCAPI/ccCallSetContext:
   Context=0x8AE700EC
004850: Dec 30 11:49:10.982: //2468/FDE37900BEAA/CCAPI/ccSaveDialpeerTag:
   Outgoing Dial-peer=20004
004851: Dec 30 11:49:10.982: //2469/FDE37900BEAA/CCAPI/cc_api_update_call_info:
   Interface=0x8966B7D4, Call Id=0x9A5
004852: Dec 30 11:49:10.982: //2469/FDE37900BEAA/CCAPI/cc_api_call_proceeding:
   Interface=0x8966B7D4, Progress Indication=NULL(0)
004853: Dec 30 11:49:10.986: //2469/FDE37900BEAA/CCAPI/cc_api_call_alert:
   Interface=0x8966B7D4, Progress Indication=NULL(0), Signal Indication=SIGNAL RINGBACK(1)
004854: Dec 30 11:49:10.986: //2469/FDE37900BEAA/CCAPI/cc_api_call_alert:
   Call Entry(Retry Count=0, Responsed=TRUE)
004855: Dec 30 11:49:10.986: //2468/FDE37900BEAA/CCAPI/ccCallAlert:
   Progress Indication=NULL(0), Signal Indication=SIGNAL RINGBACK(1)
004856: Dec 30 11:49:10.990: //2468/FDE37900BEAA/CCAPI/ccCallAlert:
   Call Entry(Responsed=TRUE, Alert Sent=TRUE)
004857: Dec 30 11:49:10.990: //2469/FDE37900BEAA/CCAPI/cc_api_get_called_ccm_detected:
   CallInfo(ccm detected=0)
004858: Dec 30 11:49:10.990: //2469/FDE37900BEAA/CCAPI/ccCallFeature:
   Feature Type=25, Call Id=2469
004859: Dec 30 11:49:10.990: //2468/FDE37900BEAA/CCAPI/cc_api_get_delay_xport:
   CallInfo(delay xport=FALSE)
004860: Dec 30 11:49:10.994: //-1/xxxxxxxxxxxx/CCAPI/ccIFCallSetupRequestPrivate:
   Interface=0x8864B28C, Interface Type=6, Destination=, Mode=0x0,
   Call Params(Calling Number=,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
   Called Number=4034(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
   Subscriber Type Str=, FinalDestinationFlag=FALSE, Outgoing Dial-peer=0, Call Count On=FALSE,
   Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Application Call Id=)
004861: Dec 30 11:49:10.994: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
004862: Dec 30 11:49:10.994: :cc_get_feature_vsa malloc success
004863: Dec 30 11:49:10.994: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
004864: Dec 30 11:49:10.994:  cc_get_feature_vsa count is 5
004865: Dec 30 11:49:10.994: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
004866: Dec 30 11:49:10.994: :FEATURE_VSA attributes are: feature_name:0,feature_time:2330248280,feature_id:2064
004867: Dec 30 11:49:10.994: //2470/xxxxxxxxxxxx/CCAPI/ccIFCallSetupRequestPrivate:
   SPI Call Setup Request Is Success; Interface Type=6, FlowMode=1
004868: Dec 30 11:49:10.994: //2470/xxxxxxxxxxxx/CCAPI/cc_api_call_proceeding:
   Interface=0x8864B28C, Progress Indication=NULL(0)
004869: Dec 30 11:49:10.994: //2470/xxxxxxxxxxxx/CCAPI/cc_api_call_alert:
   Interface=0x8864B28C, Progress Indication=INBAND(8), Signal Indication=SIGNAL RINGBACK(1)
004870: Dec 30 11:49:10.994: //2470/xxxxxxxxxxxx/CCAPI/cc_api_call_alert:
   Call Entry(Retry Count=0, Responsed=TRUE)
004871: Dec 30 11:49:10.998: //2470/xxxxxxxxxxxx/CCAPI/ccCallFeature:
   Feature Type=12, Call Id=2470
004872: Dec 30 11:49:10.998: //2470/xxxxxxxxxxxx/CCAPI/cc_api_call_alert:
   Interface=0x8864B28C, Progress Indication=INBAND(8), Signal Indication=SIGNAL RINGBACK(1)
004873: Dec 30 11:49:10.998: //2470/xxxxxxxxxxxx/CCAPI/cc_api_call_alert:
   Call Entry(Retry Count=0, Responsed=TRUE)
004874: Dec 30 11:49:16.126: //2468/FDE37900BEAA/CCAPI/cc_api_call_disconnected:
   Cause Value=41, Interface=0x8786AC44, Call Id=2468
004875: Dec 30 11:49:16.126: //2468/FDE37900BEAA/CCAPI/cc_api_call_disconnected:
   Call Entry(Responsed=TRUE, Cause Value=41, Retry Count=0)
004876: Dec 30 11:49:16.126: //2469/FDE37900BEAA/CCAPI/ccCallDisconnect:
   Cause Value=41, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
004877: Dec 30 11:49:16.130: //2469/FDE37900BEAA/CCAPI/ccCallDisconnect:
   Cause Value=41, Call Entry(Responsed=TRUE, Cause Value=41)
004878: Dec 30 11:49:16.130: //2469/FDE37900BEAA/CCAPI/cc_api_get_transfer_info:
   Transfer Number Is Null
004879: Dec 30 11:49:16.130: //2468/FDE37900BEAA/CCAPI/ccCallDisconnect:
   Cause Value=41, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=41)
004880: Dec 30 11:49:16.130: //2468/FDE37900BEAA/CCAPI/ccCallDisconnect:
   Cause Value=41, Call Entry(Responsed=TRUE, Cause Value=41)
004881: Dec 30 11:49:16.130: //2468/FDE37900BEAA/CCAPI/cc_api_get_transfer_info:
   Transfer Number Is Null
004882: Dec 30 11:49:16.130: //2468/FDE37900BEAA/CCAPI/cc_api_call_disconnect_done:
   Disposition=0, Interface=0x8786AC44, Tag=0x0, Call Id=2468,
   Call Entry(Disconnect Cause=41, Voice Class Cause Code=0, Retry Count=0)
004883: Dec 30 11:49:16.130: //2468/FDE37900BEAA/CCAPI/cc_api_call_disconnect_done:
   Call Disconnect Event Sent
004884: Dec 30 11:49:16.130: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
004885: Dec 30 11:49:16.130: :cc_free_feature_vsa freeing 8AE4D330
004886: Dec 30 11:49:16.130: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
004887: Dec 30 11:49:16.130:  vsacount in free is 4
004888: Dec 30 11:49:16.134: //2469/FDE37900BEAA/CCAPI/cc_api_call_disconnect_done:
   Disposition=0, Interface=0x8966B7D4, Tag=0x0, Call Id=2469,
   Call Entry(Disconnect Cause=41, Voice Class Cause Code=0, Retry Count=0)
004889: Dec 30 11:49:16.134: //2469/FDE37900BEAA/CCAPI/cc_api_call_disconnect_done:
   Call Disconnect Event Sent
004890: Dec 30 11:49:16.134: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
004891: Dec 30 11:49:16.134: :cc_free_feature_vsa freeing 8AE4C530
004892: Dec 30 11:49:16.134: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
004893: Dec 30 11:49:16.134:  vsacount in free is 3
004894: Dec 30 11:49:16.138: //2470/xxxxxxxxxxxx/CCAPI/ccCallFeature:
   Feature Type=34, Call Id=2470
004895: Dec 30 11:49:16.138: //2470/xxxxxxxxxxxx/CCAPI/ccCallDisconnect:
   Cause Value=16, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
004896: Dec 30 11:49:16.138: //2470/xxxxxxxxxxxx/CCAPI/ccCallDisconnect:
   Cause Value=16, Call Entry(Responsed=TRUE, Cause Value=16)
004897: Dec 30 11:49:16.138: //2470/xxxxxxxxxxxx/CCAPI/cc_api_get_transfer_info:
   Transfer Number Is Null
004898: Dec 30 11:49:16.142: //2470/xxxxxxxxxxxx/CCAPI/cc_api_call_disconnect_done:
   Disposition=0, Interface=0x8864B28C, Tag=0x0, Call Id=2470,
   Call Entry(Disconnect Cause=16, Voice Class Cause Code=0, Retry Count=0)
004899: Dec 30 11:49:16.142: //2470/xxxxxxxxxxxx/CCAPI/cc_api_call_disconnect_done:
   Call Disconnect Event Sent
004900: Dec 30 11:49:16.142: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
004901: Dec 30 11:49:16.142: :cc_free_feature_vsa freeing 8AE4C450
004902: Dec 30 11:49:16.142: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
004903: Dec 30 11:49:16.142:  vsacount in free is 2

Similar Messages

  • Cannot open pictures in Window 8.1...getting message 'the remote procedure call failed". What is the solution?

    cannot open pictures in Window 8.1...getting message 'the remote procedure call failed".  What is the solution?
    I recently bought a new HP computuer and uploaded Window 8.1.  I then transfered photo files from old computer to new computer using a portable storage drive.
    When trying to view the photos, a message pops up showing a file path...and the message 'the remote procedure call failed'.  Photos are in jpeg format.
    Please let me know what I can do to view photos?

    What program you use to view these photos? Choose another app to view these photos
     for a test.
    This issue only occurred when you view photo? What is the result if we connect the
    portable storage drive to other computer (if possible)?
    Run sfc/scannow to check and fix if there are some missing or corrupted system files.
    Check the event viewer to see the detailed information of this issue.
    Regards
    Yolanda
    TechNet Community Support

  • Error during installation of ECC6- system call failed

    Dear all,
    i encounter the error as below during sap installation. its looks like the ID issue, but this id (fbqadm) is using by me to log into the windows. please help me.
    thank
    ERROR      2009-03-17 10:07:25.583 [syxxsyshlp.cpp:78]
               syslib::printOSError(const iastring &, int, DWORD, const iastring &, CMessage::eLogMessage)
    FSL-00001  System call failed. Error 1326 (Logon failure: unknown user name or bad password.
    ) in execution of system call 'LogonUser' with parameter (fbqadm, SAPFBWDEV01, *******, LOGON32_LOGON_INTERACTIVE,LOGON32_PROVIDER_DEFAULT,&hUserToken), line (1014) in file (synxccuren.cpp).
    TRACE      2009-03-17 10:07:25.813 [iaxxejsbas.hpp:408]
               handleException<ESyException>()
    Converting exception into JS Exception ESyException.
    TRACE      2009-03-17 10:07:25.813
    Function setMessageIdOfExceptionMessage: modlib.jslib.caughtException

    problem fix after reboot the server

  • IPhone 4S Siri Will No Longer Voice Dial Contacts - Always Call Failed

    I am not exactly sure when this started (5.0.1?), but when I ask Siri to dial someone in my contacts, Siri recognizes the request, proceeds to Dial the number and no matter which contact I try, I get an immediate "CALL FAILED" and then the iPhone immediately locks. I have restored the iPhone as new, Reset Network Settings, etc. to no avail. If I turn Siri off from Settings, the phone will revert to the previous Voice Control that was present in previous iPhones and Voice Calls are successful. Only when trying to use Siri do all voice initiated calls fail. And it is 100% consistent in the failure. This does not appear to be a Siri network issue, as all Siri other Siri requests work and are speedy. Co-workers with the 4S are also experiencing the same issue, so it does not appear to be specific to just my iPhone. Can anyone else confirm? Thanks.

    OK, so i have tracked it down to a single AT&T Cell Tower location in my instance, but it also just so happens to be at my office, which means I am affected by it all day. What is happening is that at this particular location, the AT&T tower is misconfigured or experiencing some type of technical issue, resulting in the inability of the cell tower to handle simultaneous voice and data. Siri uses data to match the contacts, names etc and hands off to the Phone dialer, which immediately experiences a call failure as a result of the 3G Data still being in use by Siri. You can verify simultaneous voice and data connectivity by placing a voice call and then attempting to use 3G data (you must not be using WiFi to determine if this is a problem with the Cell network). While in a voice call, launch the Speedtest.net Mobile Speed Test app. You will clearly see that 3G data services have all but ceased if this is your problem. End the Voice Call and run the Speedtest.net Mobile Speed Test again and 3G data will work fine.
    I have reported the problem via AT&T's Mark the Spot App numerous times and had my colleagues do the same and called AT&T Wireless customer service to no avail. They simply refuse to acknowledge the issue is on their end. I personally know at least 5 other iPhone 4S users in my office who are experiencing the same issue and the results can be consistently recreated on all of their devices. And again, once they leave the office in the afternoon, all of their services return to normal and they can again make and place Voice initiated phone calls without the dreaded Call Failed. Thanks AT&T.

  • My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

    My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

    Hello SamSax
    Check out the assist page below for troubleshooting call connectivity.
    Calls and connection issues
    http://www.apple.com/support/iphone/assistant/calls/
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Dropped calls and "Call failed" on edge

    My experience has been the opposite from others on the forum with the new 2.0.2 software. I can get 3G in town and I can place and receive calls just fine. At home, I only have an edge connection with usually 2-3 bars. 9 out of 10 calls I try to make from home fail. I get the three beeps and "Call failed" message on the screen. Usually it is a split second after I hit the call button. It's not even trying to make the call. I have restored it, restarted, etc. and it still happens! I cannot make a phone call at all. This is my business phone, and it is affecting my response to clients. Anyone have any suggestions? I will probably go to the genius bar tomorrow, but if I don't have to go through the hassle, I won't.

    tigerarch,
    Does this happen in all locations, or just your home?
    What does the AT&T coverage map show for your home?
    I live in a moderate area, and AT&T's disclaimer on the coverage map says that Good and Moderate may not have in building coverage. Not only does my iPhone sometimes not pick up a signal or complete calls, the same applies to other AT&T phones there.
    My home is also made of stucco, which along with brick and cement block, is one of the worst materials for blocking signals.
    If this only happens in one location, I would recommend contact AT&T and see if they will open a ticket. The probably won't open a ticket if your coverage is listed as "Moderate"
    Hope this helps,
    Nathan C.

  • I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make

    I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make .. I Don't know what to DO Please anyone help me i've got OS 5.0.1 and it's factory unlocked i've boughted from USA and it was sent to me where 'am living now in Egypt ...ANy Helpppppppppp Pleasee

    try general>settings>reset>reset all settings and start up as an new phone.

  • Thanks this was very useful.. I have a brand new iphone 4s unlocked version from singapore and I am having the same problem constant network fluctuations, no service, call failed, invalid sim, sim failure, bars fluctuating from 5 - 3 - 2 - 1, no signal/ba

    I have a brand new iphone 4s unlocked version from singapore and I am experiencing constant network fluctuations on my iphone , no service, call failed, invalid sim, sim failure, bars fluctuating from 5 - 3 - 2 - 1, no signal/bars searching etc... Ifeel miserable after trying out all the options changed multiple sims, tried multiple carriers, restored the phone back and have set-up as new device but the problem does not get solved... its is so frustrating that after investing on a world's most expensive phone you cannot enjoy the calling features which the phone offers which is the main thing you own the phone for.. Rest of the things are working.. The funniest part I am not able to make calls or receive calls but can access the internet..  I have tried every possible thing and really very frustrated with this iphone of mine...I hope the problem gets solved.. would anyone have any solutions to this problem.. Does it mean one should never update software as I hear that after updating to IOS.5.1 the problem has started coming and same has been with there.... Apple says its a hardware failure which is very difficult to digest as sometimes I get 5 bars and able to make and receive calls but 95% of the time I am unable to. If anyone has any solution I will be very happy if he or share can share the same. Many thanks. its so disgusting to experience this on top of this apple does not support global warranty for the phone as you need to go to the country from where you bought the phone for replacement.. Truly sad state of affairs.. very very very dissappointing.

    Have a look at this it might help
    http://support.apple.com/kb/TS4148

  • Call failed constantly after upgrade to OS 4.2

    Has anyone else suffering the same problem? My iPhone 4 just keeps failing to make a call after upgrading to OS 4.2. The strange thing is that it seems this just happens within vodafone's 2G network. If I turn 3G on, there is no problem with call failed. However, I normally turn 3G off for getting longer battery life. Is it a problem with the phone? or it is the network problem? Has anyone got the idea?

    I am having similar problems connecting calls and having calls drop since upgrading to 4.2.1. Been on to Vodafone to sort but they don't seem to be having issues. From searching online, seems to be an issue after the last upgrade. Not sure what to do next. Happens on 2G and 3G for me

  • Web services Connection_Operations.Logon call fails on Data Services 4.0

    Hello,
    We recently installed Data Services 4.0.  We have a custom Java app which makes use of the web services interface.  We had previously used Axis to generate the java class.  With DS 4, it looks like the Logon method did change as it now requires the cms system and authentication.  We manually updated the java classes to includes these, which has been our general approach in the past for newer releases.  However DS 4 uses Axis2 and I'm not sure that this approach would work.
    My problem is that the "Logon" call fails with very little details.
    In viewing  both the webadmin.log  and WebService.log it only reports the following:
    11/02/2011 18:42:17 [  SEVERE ] Logon failed.  Error: null
    I understand that I can control the logging detail .  The Integrator Guide for DS 4.0, has the following instruction, yet there is no log4j.properties file on my system?
    "To control the level of detail in the webadmin.log file, you must edit the log4j.properties file.
    The properties file is located in:
    LINK_DIR\ext\webserver\webapps\acta_web_admin\WEB-INF
    To obtain a debug trace of events, change the log level from the default of INFO to DEBUG. For example,
    log4j.rootLogger=DEBUG, A"
    Any advise would be greatly appreciated
    Thanks

    Hello,
    Unfortunately, stdout.log below doesn't show anything possibly due to some mis-configuaration of log4j.properties.  In my previous post I requested info on which log4j.properties should be modified as the documentation in the DS 4.0 Integrator's guide mentions a none-existent path?
    log4j:WARN No appenders could be found for logger (org.apache.commons.digester.Digester).
    log4j:WARN Please initialize the log4j system properly.
    log4j:WARN No appenders could be found for logger (com.sun.faces.config.ConfigureListener).
    log4j:WARN Please initialize the log4j system properly.
    log4j:WARN No appenders could be found for logger (org.apache.commons.digester.Digester).
    log4j:WARN Please initialize the log4j system properly.
    log4j:WARN No appenders could be found for logger (com.sun.faces.config.ConfigureListener).
    log4j:WARN Please initialize the log4j system properly.
    com.businessobjects.webpath.rebean3ws.Activator
    log4j:WARN No appenders could be found for logger (org.apache.commons.digester.Digester).
    log4j:WARN Please initialize the log4j system properly.
    null

  • I need someone help me about "Call Failed".

    Excuse me. I live in Taiwan and my english is poor.
    I have a strange problem.
    When I receive a phone call or call out, I press the "Speaker" to talk then my phone shows "Call Failed" every time.
    I try to restore my phone, but the "Speaker" still don't work.
    Is this the firmware or hardware problem?
    Have someone the same problem?
    (My phone is iPhone 3G 16GB, Model MB500T, Version 2.2.1, Modem Firmware 02.30.03)
    Please, I need your help.

    I live in Taiwan, but I bought the iPhone in Italy.
    So the agent of Taiwan don't fix or replace it.
    I feel so sadly.

  • Remote procedure call failed and did not execute response after changing contents

    Hey Hey!
    I have reviewed the other posts related to this issue but have not found a solution.
    I have done myself quite a mischief and hope someone here can help me out!
    I'm running an old ACER laptop with Windows 7. This PC belonged to an old colleague and therefore all of the folders and user names were still under his name, so I decided to try to change them all to my name. The main issue was the USER folder which had
    the locked symbol next to it but it wasn't locked at all. I googled how to delete this folder and one bright spark suggested I create a new folder with my name, copy all of the folders from the other 'locked' user's folder into my folder, and then delete the
    old user's folder. 
    That was fine. All seemed well. When I tried to delete the old folder the computer sat around thinking saying it was 'moving' but not doing anything. So, I cancelled the operation in the Task Manager. When I attempted to open any folder from the start menu
    or desktop or task bar I was presented with a bunch of numbers and letters and the message "REMOTE PROCEDURE CALL FAILED AND DID NOT EXECUTE."
    I quickly googled the message realising I'd made a major error and the first response was to type in services.msc or something to that effect, so I typed that into the Start Menu search bar and hit enter and nothing came up. So, I tried again, but now I
    couldn't type anything into the search bar, I could not even select any programs from the Start Menu. 
    So, I can't access the Start Menu, search bar, or any of the folders unless I open uTorrent, select open containing folder, and from there I can access what I need.
    I'm too afraid to reboot the PC. I can't locate my copy of Windows 7 anywhere. I'm freaking out!!
    Before I pour my lowly student wage into getting a professional to fix it, could someone please offer some suggestions??
    Greatly appreciated in advance. 
    Paris, Texas. 

    Hi,
    Based on your description, for this question is more related to NetQueryDisplayInformation() API, in order to get better help, we may ask for suggestions in the following MSDN forum.
    MSDN Forum
    https://social.msdn.microsoft.com/Forums/en-US/home
    Besides, we can try to use a script to get all domain users. Regarding this point, the following script can be referred to as reference.
    How to list all active directory users in a particular domain using PowerShell
    https://gallery.technet.microsoft.com/office/How-to-list-all-active-0d9be7ce
    In addition, for scripts, we can also ask for help in the following forum.
    The Official Scripting Guys Forum
    https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
    Best regards
    Frank Shen 

  • Remote Procedure Call Failed - Verifying Account prior to establishing PIN as sign in option

    PC Settings / Accounts / Sign in options / PIN / Verify Account info / :  I enter my Microsoft Account password and receive the following message:
    "Remote procedure call failed"
    Cannot cancel - screen keeps reappearing.
    I have successfully established a sign-in PIN for my Win 8.1 desktop.  The above problem is occurring only on my Win 8.1 laptop.

    Hi,
    Sorry for my late reply.
    Regarding the issue, please ensure that RPC service is start.
    If it stops, I suggest you perform the following step to start it.
    1.Press Win+R, and type regedit, then press enter.
    2.Please navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\RpcSs and
    locate Start registry key
    Double click on Start and edit the value:
    Change Startup type :
    Automatic - 2
    Manual - 3
    Disabled - 4
    Automatic (Delayed Start) - 2
    Note: When you change to Automatic (Delayed Start) a new key DelayedAutostart is created with value 1.
    When you change to Automatic from Automatic (Delayed Start), DelayedAutostart change value to 0.
    If it cannot start, please refer to the following article to test it.
    "Could not start the Remote Procedure Call (RPC) Service. Error 1058" error message when you manually start the Remote Procedure Call service
    http://support.microsoft.com/kb/838428
    Regards,
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error Creating VM on 2011 iMac - The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).

    I am running Hyper-V in Windows 8.1 on a late 2011 27 inch iMac. Whenever I try to create a virtual machine I get the error below and Windows warns that it will restart in 1 minute. I tried a clean install of Windows, but my PC still crashes ever
    time I try to create a VM. I was able to successfully use Hyper-V in prior versions of Windows on this same PC. Any clue as to what is going on? A driver? Windows 8.1? Mac Hardware related?
    I see the following two entries in event viewer but have no other clue as to what is happening:
    Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
    Source:        Microsoft-Windows-Hyper-V-VMMS
    Date:          1/10/2014 10:48:46 AM
    Event ID:      16000
    Task Category: None
    Level:         Error
    Keywords:     
    User:          SYSTEM
    Computer:      Charles-PC.CHARLESPOOL.local
    Description:
    The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
        <EventID>16000</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2014-01-10T15:48:46.770451300Z" />
        <EventRecordID>58</EventRecordID>
        <Correlation />
        <Execution ProcessID="2488" ThreadID="8704" />
        <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
        <Computer>Charles-PC.CHARLESPOOL.local</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <UserData>
        <VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
          <ErrorMessage>%%2147944126</ErrorMessage>
          <ErrorCode>0x800706BE</ErrorCode>
        </VmlEventLog>
      </UserData>
    </Event>
    Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
    Source:        Microsoft-Windows-Hyper-V-VMMS
    Date:          1/10/2014 10:48:46 AM
    Event ID:      16010
    Task Category: None
    Level:         Error
    Keywords:     
    User:          SYSTEM
    Computer:      Charles-PC.CHARLESPOOL.local
    Description:
    The operation failed.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066f867-7ca1-4418-85fd-36e3f9c0600c}" />
        <EventID>16010</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2014-01-10T15:48:46.773497100Z" />
        <EventRecordID>59</EventRecordID>
        <Correlation />
        <Execution ProcessID="2488" ThreadID="8704" />
        <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
        <Computer>Charles-PC.CHARLESPOOL.local</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <ProcessingErrorData>
        <ErrorCode>15005</ErrorCode>
        <DataItemName>Parameter0</DataItemName>
        <EventPayload>
        </EventPayload>
      </ProcessingErrorData>
    </Event>

    Hi CharlesPool,
    I am assuming that the win8.1 is in-place updated from win8 .
    Maybe you need to check the state of hypervisorlaunchtype .
    If it is off , please run command " bcdedit /set hypervisorlaunchtype auto "
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Exchange 2010 SP3 Failing to Install "The remote procedure call failed"

    I am getting an error while trying to upgrade the first Mailbox server in the organization to SP3. The CAS and HUB servers already upgraded without any issues. Any help is greatly appreciated.
    Here is the exchange setup logs output:
    [11/15/2014 09:10:52.0512] [2] Creating Server Object with DN = /dc=xxx/dc=xxx/cn=Configuration/cn=Services/cn=Microsoft Exchange/cn=xxx/cn=Administrative Groups/cn=Exchange Administrative Group (xxxx)/cn=Servers/cn=xxxxxx
    [11/15/2014 09:10:52.0512] [2]  Status code check (f:\14.03.0123\sources\dev\admin\src\libs\ds\x_dob.cxx:3370)
               Error code 0X8000500D (20493): This property can't be found in the cache.
    [11/15/2014 09:10:52.0528] [2] Leaving ScCreateServerObject
    [11/15/2014 09:10:52.0528] [2] Entering ScSetServerNetworkAddresses
    [11/15/2014 09:10:52.0528] [2] Entering ScGetServerDNSNameFromDS
    [11/15/2014 09:11:11.0482] [2]  ScUserDNFromLoginName (f:\14.03.0123\sources\dev\admin\src\libs\exsetup\exmisc.cxx:1441)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2]  ScGetServerDNSNameFromDS (f:\14.03.0123\sources\dev\admin\src\libs\exsetup\dsmisc.cxx:3481)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2] Leaving ScGetServerDNSNameFromDS
    [11/15/2014 09:11:11.0482] [2]  ScSetServerNetworkAddresses (f:\14.03.0123\sources\dev\admin\src\udog\excommon\ptudutil.cxx:1028)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2] Leaving ScSetServerNetworkAddresses
    [11/15/2014 09:11:11.0482] [2]  CAtomServer::ScAddOrRefreshDSObjects (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\components\server\a_server.cxx:288)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2]  CAtomServer::ScAddDSObjects (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\components\server\a_server.cxx:354)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2]  CBaseAtom::ScReinstall (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:815)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2] Leaving CBaseAtom(Microsoft Exchange Server-Level Objects)::ScReinstall
    [11/15/2014 09:11:11.0482] [2] Service = '' CBaseServiceAtom::ScReinstall (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\basesvcatom.cxx:242)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2] Leaving CBaseServiceAtom(Microsoft Exchange Server-Level Objects)::ScReinstall
    [11/15/2014 09:11:11.0482] [2] mode = 'Reinstall' (61955) CBaseAtom::ScSetup (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:537)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2]  ScSetupAtom (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\exsetds.cxx:882)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2] Leaving ScSetupAtom
    [11/15/2014 09:11:11.0482] [2] [ERROR] An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
    [11/15/2014 09:11:11.0482] [1] The following 1 error(s) occurred during task execution:
    [11/15/2014 09:11:11.0482] [1] 0.  ErrorRecord: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
    [11/15/2014 09:11:11.0482] [1] 0.  ErrorRecord: Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
    [11/15/2014 09:11:11.0482] [1] [ERROR] The following error was generated when "$error.Clear();
        buildToBuildUpgrade-ExsetdataAtom -AtomName Server -DomainController $RoleDomainController
    " was run: "An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.".
    [11/15/2014 09:11:11.0482] [1] [ERROR] An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
    [11/15/2014 09:11:11.0482] [1] [ERROR-REFERENCE] Id=AllADRolesCommon__ExsetdataServer Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
    [11/15/2014 09:11:11.0482] [1] Setup is stopping now because of one or more critical errors.
    [11/15/2014 09:11:11.0482] [1] Finished executing component tasks.
    [11/15/2014 09:11:11.0529] [1] Ending processing Install-MailboxRole
    [11/15/2014 09:14:12.0977] [0] End of Setup
    [11/15/2014 09:14:12.0977] [0] **********************************************
    Additionally here is the 2 errors that are showing up in the event viewer for MSExachange Management:
    Exchange Management Console-Local
    2652
    45
    00:00:18.9698426
    View Entire Forest: 'True', Configuration Domain Controller: 'domaincontroller.xxx.xxx', Preferred Global Catalog: 'domaincontroller.xxx.xxx', Preferred Domain Controllers: '{ domaincontroller.xxx.xxx }'
    Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
    0
    Exchange Management Console-Local
    2652
    9
    00:00:37.7834262
    View Entire Forest: 'True', Configuration Domain Controller: 'domaincontroller.xxx.xxx', Preferred Global Catalog: 'domaincontroller.xxx.xxx', Preferred Domain Controllers: '{ domaincontroller.xxx.xxx }'
    Microsoft.Exchange.Management.Deployment.ScriptExecutionException: The following error was generated when "$error.Clear(); buildToBuildUpgrade-ExsetdataAtom -AtomName Server -DomainController $RoleDomainController
    " was run: "An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.". ---> Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The
    remote procedure call failed.'. --- End of inner exception stack trace ---
    0
    Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.

    Hi,
    Please try to remove the Water mark and Action keys under
    HKLM\SOFTWARE\Microsoft\Exchangeserver\V14\MailboxRole
    After that, reboot the server and rerun the set up.
    This issue due to Exchange failed set up was trying to resume the previously failed setup rather than starting completely over.
    Best Regards.

Maybe you are looking for

  • Is it true? Is my LaCie dead?

    Fine time for a LaCie external 500GB (2 FW 800, 1 FW 400, 1 USB 2.0) ports to be potentially dead. I am thankful we've gotten so much use of it, so please don't tell me so. I have two externals (LaCie 500GB, and a LaCie 1 TB) mounted to the desktop.

  • I have a HP officejet 5610V all in one connected to a HP Pavilion slimline s7500n PC connected to

    A Gateway 2 wire wireless Modem It is connected to the printer with a USB cable, I bought a GS63M laptop with windows 7 and want to run the printer for the laptop threw the 2 wire wireless modem. The gate way modem has nic 5 cable connections one USB

  • I cant open my trash

    Whatever I do, I cant open my trash. Ive tried relaunching finder, and "killall dock" and "killall finder" in terminal. Nothing works. ans when i look up trash in spotlight I get a error. I dont really get how terminal works either.....

  • Why sports tracker not available for N97

    Why sports tracker not available for N97? One of the most expensive nokia phones without sports tracker. Its weird.. nokia whats happening, dont disappoint N97 customers

  • Moving in and out of Raw Converter

    I am using PSE6 for Windows 64.  Once I move a set of NEF / Raw files out of the Raw Converter into PSE Editor, can I move the file or files back into the Raw Converter from the Editor?  Closing the files and opening them back in the Organizer is my