CO - Cost per case report

Hi All,
Is there any standard report in SAP in which we can get the Cost per case and weighted average?
Case could be like pack of 12 bottles. If the production is 12000 bottles then the cases will be 1000 and cost per case will be 1000 X cost.
Thanks,
Syed Abid Hussain

Hey,
To my knowledge such a report does not exist in standard.
In this case a custom report should be written.
If the report should be related only to the total value (moving average or standard price), then you only need to take into consideration the MARM, MARA and MBEW table or using logical database MSM (creating a query).
Regards,
Koen

Similar Messages

Cost per mile report

Hi
I am new to the logistics module and have just started learning the PM and CS modules. I was just trying to figure out a query raied by one of the clients regarding a report which will generate the "cost per mile".
Actually the client wants to calculate the cost incurred on the fuel used to run their vehicles. These are fueled from a particular fueling station and the client wants to do a feasibility check on the cost incurred on running the vehicles.
Kindly help me with this. The client is actually looking for a standard SAP report for cost per mile.
Thanks

Hello,
Also refer this [ THREAD|Re: error in Fleet management customising] and [link|Error when recording measurements in IFCU]
Regards
Nav
Edited by: Desire_Naveen on Nov 4, 2009 12:35 PM

Custom SAP report used to display an average standard cost per material.

Hi All,
I need to implement a report with the following functionality,
This is a custom SAP report used to display an average standard cost per material. Standard cost data is stored in SAP at the Material/Plant level. This report will gather the individual Standard Costs at each applicable plant (restricted by selection screen input and additional logic specified in more detail in the u201CReport Fieldsu201D section) for applicable Materials (restricted by selection screen input; if not specified all materials should be returned) and calculate an average standard cost for each material. The corresponding Currency and Base Unit of Measure will also be displayed.
Additionally the relevant u201CCommodity Code/Import Codeu201D information should be displayed for each material returned. This attribute is also stored at the Material/Plant level. To determine the value of this field for each relevant material, the report logic must retrieve the values stored for each plant. If all values are the same, the value can be output to the report. If not all values are equal, a message u201CNot Consistentu201D should be output. It should be noted that if all values are u201Cnull,u201D a null value should be returned in the report.
Can any one provide me with sample code for the same??
Thanks Debrup.

Hello,
Also refer this [ THREAD|Re: error in Fleet management customising] and [link|Error when recording measurements in IFCU]
Regards
Nav
Edited by: Desire_Naveen on Nov 4, 2009 12:35 PM

Manage Item Cost per Warehouse

Previous posts have confirmed that it is not possible to change the Manage Item Cost per Warehouse option once any inventory transactions have been posted. One entry posted in Feb 2010 (below) even offered a link to other "Irreversible Ticks" (although that link is now broken). This limitation is required in order to preserve the relational integrity of the system, within its design architecture.
Manage item cost per warehouse
If a database has been in operation for several years with company-level costing, and business changes now force tracking costs by warehouse, I see no option other than creating a new database with the per-warehouse option, then loading items, inventory, GL, etc. Unfortunately, all history (GL transactions, document history, change log, etc.) is no longer available in that database.
Is anyone aware of SAP plans or tools to support any other alternatives to this kind of business change?
Thanks, Dave

Hi Dave,
I am afraid creating a new database is your only option.
For old data, you may still keep access for certain reports. All open items has to be imported to new db. It is a kind of manual archiving. Your database performance will gain a lot though.
Thanks,
Gordon

"Cost Rollup - No Report" not updating costs for some items.

Hi ,
We have an issue with "Cost Rollup - No Report" program. When it is run for all items in an Organization, some item costs were not getting updated.
"Include in Cost Rollup" flag in Master Item form and in Item Costs form is enabled for these items. When we run the report for specific item , it is working fine, cost
is getting updated. Only when we run the report for all items of an org, we are having this issue. Any suggestion or help in this regard is highly appreciated.
Thanks in advance,
Pavan.

Hi,
I mean B(Sub Assembly)
Item Rollup Flag
A No
--B Yes
---B1 No
---B2 No
---B3 No
--C Yes
In this case when we run cost rollup by giving item A, Oracle will consider below structure.
A
--C
Regards,
Sarvottam.

Ideas / Recommendations for Workgroup Printer with LOW Cost-per-page?

(Like everyone else), we're printing more color than we anticipated.
Our leasing company charges $0.09 per color page on our Xerox Workcenter 7545 copier.
Color print is primarily used by a small group (6 individuals) who print about 3000 color pages per month. I'm considering a smaller additional network laser just for that group - if a suitable one can be found. (Does not need to be multi-function.)
We'd probably purchase (vs. lease) in this case - but cost-per-page (toner cost) is an important consideration.
Has anyone else done a similar recent study - and been happily surprised by the actual outcome? Or - are your costs lower - but you've been unsatisfied by reliability, etc.?
Thanks in advance!
This topic first appeared in the Spiceworks Community

I would greatly appreciate any feedback please!!! I thank you in advance!!!

Cost Per hour, Costs per route not updating in S114 structure

Dear PM Guru's,
i am using MET unit system for vehicle consumption analysis. After completion of measurement documents and material issuance through IFCU, i checked the MCIZ report , but there i could not find the value of Costs per Hour, Costs per route information. I am requesting you all please guide me where i did the mistake either in "Configure measurement document updation" or calculation method?
I am eagerly waiting for replies.
regards
JKM

Its not possible to give any specific section where it might have gone wrong. Suggest you to check the complete configuration under Settings for Fleet Management. Also check the configuration in IMG - PM & CS - Information Systems - Configure Measurement document update

"Cost Rollup - No Report" - allow updates getting flipped to No

Hi ,
We have an issue with "Cost Rollup - No Report" program.
When running the 'Cost Rollup - No Report' job in Oracle for the any cost type, whether it is all items or range of items, the 'allow updates' flag for the that cost type keeps getting flipped in the 'Cost Types' form. The flipping of this flag is preventing us from updating any costs in ERP. Can you please advise why this flag keeps getting flipped so we can prevent in the future?
Thanks in advance,
Abhishek

Hi,
I mean B(Sub Assembly)
Item Rollup Flag
A No
--B Yes
---B1 No
---B2 No
---B3 No
--C Yes
In this case when we run cost rollup by giving item A, Oracle will consider below structure.
A
--C
Regards,
Sarvottam.

Freight costs per KG when PO order is in PC, how to solve?

Hi,
My client want to make use of a condition type in the purchase calculation sheet which covers the freight costs per KG. The case is that we also order per PC. How to solve this problem? Which condition type can I use for freight costs per kg?
Thank you in advance,
Eric van Zundert.

Hi,
Which condition type can I use in the PO for this purpose?
Thank you all,
Regards,
Eric van Zundert

Steps for implementing PM Order Cost and allocation Report

Hi experts,
I would like some of the experts to suggest prior steps involved in implementing PM Order Cost and allocation Report?
Is there any specific PM documentatio other then help.sap.com documentation?
Thank you
arun

Hi,
the CO-Sources (and PM is similar there) deliver plan and actual costs in different rows separated with the characteristics 0VTYPE and 0VERSION (this one separating different versions of plan data) in your case you will get in your transactional data:
ServiceOrder   0VTYPE    SWG (i leave the rest of the keys and attributes out)
SO1000          20             15.000    for your plan date
SO1000          10             10.000    that are your actual data
so what wil happen if 0VTYPE is not a Key in your DSO is that first the plan record is updated in DSO and then the second actual record overwrites this value becaus both have the same key SO1000.
You have to define carefully what keys you use in DSO to avoid this. If you can try create a test-Cube on base of the DataSource fields and look how the data are displayed in there because a cube regards all fields as key's.
regards
Christoph

ECRF Designing Services - Case Report Form Design

What is CRF?
CRF is an acronym for Case Report Form. A printed, optical, or electronic document designed to record all of the protocol-required information to be reported to the Sponsor on each trial subject.
A CRF is used to record all relevant individual subject or study patient data. The Sponsor will use this data to perform statistical analysis; the resultant analyses are included in the medical report.The CRF is designed by the Study Sponsor, possibly in collaboration with the Investigator, and is based on the Study Protocol.
Our Case Report Form Designing:
Our team of knowledgeable Clinical Data Handlers holds the skills to execute to the best quality which would lay a strong foundation to the Clinical trial. Informatics Outsourcing's experience will aid in,
* Completion of projects with reduced errors
* Translation of compound protocols into standard pages
* Offering flexibility and cost effective CRF design
* Offering Case Report Form (CRF) Design either from the Case Report Form (CRF) Guide or converting paper CRF into Electronic Case Report Form Design ( ECRF)
More about our CRF designing services Please Find at Google - Informatics Outsourcing

you could add a field, set the source of the field to hire_date (assuming hire_date is a column in the data model), and put a format mask of whatever format you want. then set visible to No.
then instead of &<hire_date> you can instead type &<name of your new field>.

Maintenance cost per production output

Dear All
I have to create report based on Maintaince cost per production output
and this report is company code wise and Fiscal year period wise ,
now i got two different cubes from where i can get that cost
1) 0PM_C01 for Maintenance Cost
2) 0PC_C01 or IC_C03 for Production output in tonnes

Hi,
If the selections used for the query are available in both the cubes,ie company code and fiscal year, then just create a multi cube over it containing both maintenance cost and production output. Map it to the correct fields from the cube and create a report with formula to calculate maintenance cost per production using maintenance cost from 0PM_C01 and production output from 0PC_C01 or IC_C03.
Regards ,
Shyam.

For Vehicle ...BOM vise materail cost per unit

Hello Experts
ON BW i need to create a report for Vehicle on material cost per unit vise (BOM vise). ...... I need your help.
With Regards

Its not possible to give any specific section where it might have gone wrong. Suggest you to check the complete configuration under Settings for Fleet Management. Also check the configuration in IMG - PM & CS - Information Systems - Configure Measurement document update

Managing item cost per warehouse.

Hello,
I have a client who recently migrated from SAP Business one 8.81 to 9.0 PL8. And now they want to manage items cost per warehouse.This is because although the cost and quantities are okay at company level, at warehouse level there are now some negative values as they have been in operation for over 3 years. In the setups, I found out that the manage item cost per warehouse check box settings was not ticked. How do i ensure that this check box is ticked and what procedures do i take to make this happen. The client has more than 2,000 items and about 30 warehouses.
Most of the recommendations in the discussion forum talk about creating a new database, After creating it, how do you go about it. what are the procedures involved?
Kind regards,
Maureen

Hi Maureen,
This setting one time setting and you can not change once Transaction is posted in System. Please also check below link.
https://help.sap.com/saphelp_sbo882/helpdata/en/45/07edb6ae742461e10000000a1553f7/content.htm
Please also check below links.
Manage Item Cost by Warehouse Function
changing Manage Item Cost per Warehouse
Manage Item Cost per Warehouse and Warehouse for Damaged Goods
Hope this help
Regards::::
Atul Chakraborty

Asset Balances & Cost Line items Report

Hi,
I am looking for a Report which would combine Asset (S_ALR_87011963)balance report and Cost line item Report(CJi3) for Projects.

Hi,
The flow is like this ( if u r using timesheets for confirmation):
CAT2 : Timesheet: Enter Times : User enters the time.
CATS_APPR_LITE : Approval of timesheet
CAT5 : Transfer to Projects.
This will post cost to Projects.
Another way of getting the Actual cost is Confirmation using CN25 or CN29.
Regards,

CO - Cost per case report

Similar Messages

Maybe you are looking for