CO-PA : How to define separate value fields for Revenue & Incoming SO

Hello friends,
In CO-PA reports, how can I see separate value fields for Revenue (ERLOS) and "Incoming Sales Order" ? I created a value field for incoming sales order value.
But when I goto customizing for CO-PA, Transfer of Incoming Sales Orders and Transfer of Billing Documents refer to the same tcode KE4I. So its not possible for me to define a condition type to 2 separate value fields.....how can I see both incoming sales order value and revenue (from invoices) together ?
Any advice you can give me would be greatly appreciated.
Cheers
Ken

Hi
In COPA value flow from a condition type thru a value feild.
One condition type can be assinged to only one value feild ratio
Condition    :        Value feild
     1                         1
But where as ratio between
Value feild              :         Condition
      1                                     N
Apart from above check the operating concern check for the values & characteristics and activate.
Thanks
Colin Thomas

Similar Messages

How to define a global field for use in User exit

Hi All,
I want to define a global flag field (say my_flag) in Function group VEDA. I need to set/reset it in exit EXIT_SAPLVEDA_003 and check its value in EXIT_SAPLVEDA_002.
Can anyone help me out in this. Where can I define this field?
Thanks.
Regards,
Riyaz

I have created a customer table zflag1 which has one field z_flag and the correspopndiong data el;ement is 'zflag' and i also ccreated parameter ID in table TPARA and assigned tht parameter ID 'ZFLAG' to my data element.
reward points if helps..
in the Z include of Exit function 3 write -
data :g_global like zflag1-z_flag.
G_GLOBAL = 'X'.
set parameter id 'ZFLAG' field g_global.
and in the Z include of exit function 2 write -
DATA G_GLOBAL LIKE ZFLAG1-Z_FLAG.
GET PARAMETER ID 'ZFLAG' FIELD G_GLOBAL.

How to get the value field of the return parameters for an action step in teststand sequence file programatically using c#

                Sequence mySequence = myEngine.NewSequence();
                mySequence.Name = "myAction";
                //Create new step of type Action and set Name
                Step mystep = myEngine.NewStep(AdapterKeyNames.DotNetAdapterKeyname, StepTypes.StepType_Action);
                mystep.Name = "GetStringObject";
                //Obtain the code module from the step
                DotNetModule myModule = mystep.Module as DotNetModule;
                //Set properties of the module
                myModule.SetAssembly(DotNetModuleAssemblyLocations.DotNetModule_AssemblyLocation_File, @"C:\Documents and Settings\My Documents\Visual Studio 2005\Projects\HelperClass\HelperClass\bin\Debug\HelperClass.dll");
                myModule.ClassName = "Class1";
                myModule.MemberType = DotNetModuleMemberTypes.DotNetMember_GetProperty;
                myModule.MemberName = "StringObject";
                mySequence.InsertStep(mystep, 0, StepGroups.StepGroup_Setup);
                mySequence.Locals.NewSubProperty("StringObject", PropertyValueTypes.PropValType_Reference, false, "", 0);
                DotNetParameterDirections reference = mySequence.Locals as DotNetParameterDirections;
                mySequence.Locals.GetPropertyObject("StringObject", 0);
                myModule.ClassReference = "Locals.StringObject";
                myModule.LoadPrototypeFromMetadataToken(385875969, 0);
After this I am not able to proceed.herewith attached documents contain screenshot of teststand file marked red is to be solved. How to define the value field of the return parameters?
Attachments:
HelperClass.cs ‏1 KB
ex1.gif ‏2305 KB

Please see my answer to your question on page two of the following forum thread:
Programmatically generating DotNet Steps in TestStand
Manooch H.
National Instruments

How to define a Value for an Attribute of an Class

Hi,
How to define a Value for an Attribute of a Class ...
( I need to change the value of an Attribute of a class in standard program ....
Ex...
   cl_hrce_masterswitches=>infotype_framework_is_active
Here infotype_framework_is_active is the attribute .. its value in standard program is 'X'... Now i need to change it as ' '.
How to define it and set value as ' '.

Hello Surendar
The static attribute INFOTYPE_FRAMEWORK_IS_ACTIVE is read-only and there is not SETTER method to manipulate its value.
However, the attribute is filled in the CLASS_CONSTRUCTOR:
METHOD class_constructor.
    IF ce_is_active                 = true OR
       global_payroll_is_active     = true OR
       mngmt_global_empls_is_active = true.
      infotype_framework_is_active = true.
      perid_infotype_is_active     = true.
    ELSE.
      infotype_framework_is_active = false.
      perid_infotype_is_active     = false.
    ENDIF.
ENDMETHOD.
Thus, you need to analyze how attribute CE_IS_ACTIVE, GLOBAL_PAYROLL_IS_ACTIVE and MNGMT_GLOBAL_EMPLS_IS_ACTIVE are filled in the CLASS_CONSTRUCTOR.
For sure you will find customizing settings that are responsible for this.
Regards
Uwe

Hi All ,How to add a new field for MEDRUCK if we havea ZMEDRUCK

Hi All ,
        How to add a new field for MEDRUCK if we have a ZMEDRUCK
Req: If I want to add a new field for the following text editor line :
IN MAIN WINDOW > TEXT EDITOR> SERCH FOR TOTAL_AMOUNT-->
In that we will have
&ekko-waers&    &komkfkwrt&
(currency)       (numerics)
Pls send the Code to make these changes .Pls its urgent
Thanks&Regards.
Bharat.

Hi
If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
If that field is not there in the any of the structures then you can define a variable using define command
/: DEFINE &VAR&
/ &VAR& = <some value>
or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
<b>Reward points for useful Answers</b>
Regards
Anji

How to create a new field for Q3 - QM notification in Header and item level

Dear All,
l
Sub: How to create a new field for Q3 - QM notification in Header and item level
Ref. the link --> Quality Notification
We want to create a new field in header level and item level.
As per the thread the solution is given below.
In the IMG Config: Quality Management -> Quality Notification -> Notification Types -> Define screen areas for notification types Then Choose 'Define screen areas' Then Click on 'New entries' button Now, select the relevant Notification Type and click in 'Enter'. Select the 'Iten Cases' register and remember to setup the Tabstrip Header, Icon, etc. Set the 'Tabstrip active' flag. Then Save.
Quality Notification -> Notification Types -> Define screen areas for notification types
WE ARE UNABLE TO FIND IN CUSTOMIZATION PATH --> DEFINE SCREEN AREAS FOR NOTIFICATION TYPES.
Please help.
Question No. 2 :
THE REQUIREMENT IS GIVEN BELOW.
We want to hide the field in Q3 - QM Notification
In header --> Reference tab --> Item (sub heading) --> "DEFECT LOCATION" FIELD TO BE ELIMINATED (HIDE)
Ref the link --> Quality notification
The solutiion is given below.
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
By double clicking the "DEFECTIVE QUANTITY (EXTERNAL), WE COULD NOT GET --> field TXTCDOT .
Plese do the needful.
We are using ECC6.0 Ehp3 and Ehp4.
With Best Regards,
Raghu Sharma

Dear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma

How to calc load parameters field for INSTALL for LOAD command

Hi everyone ,
I'll appreciate it if anyone could help me to find out how to calculate load parameters field for Install for Load Command .
(which tags and parameters I should use to make this field )
Best Regards,
SHKas

SHKas wrote:
I'll appreciate it if anyone could help me to find out how to calculate load parameters field for Install for Load Command .
(which tags and parameters I should use to make this field )Hi SHKas,
The field is deffined in the GP card spec 2.1.1 under 9.5.2.3.6 INSTALL [for load] and INSTALL [for install] Parameters. The section of text explains what each field is and the tag to use to encode. Each value is a two byte short.
Cheers,
Shane

Define deafult value profiles for general order data

In spro for the tab Define deafult value profiles for general order data,please explain to me the significance of the following terms:-
field key
relationship view
level of detail
overall profile id
checking wbs activity
graphics profile with examples.

Hi,
Field Key => In Operation enhancement tab, if you want any user defined fields, you can customize through the field key functionality. You can configure this in OILJ.
Relationship => This is for relationship between operations in maintenance order
Checking WBS activity => In WBS, for each task, start date & end date would have been maintained. In Maintenance order, based on schduling, start date & end date for operations will be calculated. Here we can customize, dates needs to be checked between these 2 documents or not.
Regards,
Maheswaran.

How to restrict separate payment document for each line item in APP

HI Experts
PLs let me know how to restrict separate payment document for each line item in APP
Thanks
Sneha
Edited by: Sneha R on Apr 14, 2009 4:18 PM

Sneha,
If your query was to group items for payment ,in FBZP co code data for payment method there are 2 options 1.group payment for marked items 2.payment per due date.
Also in the Vendor master there is a flag which will ensure that each item is paid individually,if this is what you were looking for ( FK02 change vendor).
In case you want to group items to be paid together Payment Grouping Key can be assigned in Vendor Master .
Shony

How can i find the fields for &DOPOS_CPY-WRBT1(I13.0)&

Hi All,
In sapscripts, what is the meaning for (13.0)?
how can i find the fields for &DOPOS_CPY-WRBT1(I13.0)&?
Thanks.

meaning for (13.0) is write to form this variable's 13 character non decimal and 0 character decimal places.
shortly not write decimal places.
DOPOS_CPY-WRBT1 is exist in form caller program. check in abap program not in sapscript.
take care
Çağatay

Define value in value field for CO-PA analysis.

Hello everyone,
I am looking to determine the values of a custom value field I created. This new value field is activated and assigned to an operating concern and I am able to use it in my form.
Now I would like to "link" my field value to an GL account in FI. How can I do this?
Thanks.

Hi Elodie,
Just to add to Pavan's reply you need to use tcode KEI2.
In case of SD to COPA transfer you need to map the SD condition to the value field
regards
Waman

How to define ABC class field in the Customer Master Sales tab

HI All,
can any one let me know how to define the new ABC class in the Customer Master Sales tab like below.
u2013 A (> 6,000,000 )
u2013 B (> 1,000,000u20136,000,000 )
u2013 C (> 100,000u20132,000,000 )
u2013 D (< 100,000 )
can any one let me know how to define and path in IMG.
Thanks in advance.
kumar reddy.

In my opinion, you don't have any such std table/view to update ABC Classification field. You might need to update relevant infostructure based on your requirement, such as sales, invoiced, etc..
Try with following, based on your requirement:
MC(A
SIS: Customer,Inc.Orders - Selection
MC+A
SIS: Customer Returns, Selection
MC+E
SIS: Customer, Sales - Selection
MC+I
SIS: Customer Credit Memos - Selec.
Regards
JP

How to Change the Value Field Type of a Value Field

Hi,
How can I change the value field type from Currency to Quantity of a value field? I have tried to do it in KEA6. I can change the value field and its description, but not the value field type from currency to qty. If I change this config, is there any other changes that I need to make so there is no side issue of this change?

Hi Prem,
Once you created value field as quantity or currency, you can not change this nature of value field. Based on this, system creates lots of data and tables. For this reason system will not allow any changes in quantity or currency.
Alternative way is to remove the old value field and create a new value field assign to operating concern and put all your seetings.
Please let me know if you require any clarifications.
Thank you,
Regards,
Santosh
Reward points if helpful.

How to make Target Value field mandatory in WK contracts

Dear All,
Can the Target Value field in quantity contracts be set to a mandatory field like in Value contracts?
Regards.

Hi
quantity contracts are used when you would like to limit quantity irrespective of the value of contract. Therefore quantity field is made mandatory here.
similarly value contract is used when you would like to limit value irrespective of quantity of goods.Therefore value field is made mandatory here.
Hope it helps you.

How to define the customer field in SC as mandatory

Hi all,
Could someone help me to define the customer field as
mandatory in the shopping cart?
Thank you a lot.
Best regards,
Danijela

Hi Danijela,
you could implement the BBP_DOC_CHECK_BADI and check if the customer field is filled. If not, you can issue an error message (Type 'E') in the BAdI. This message will be visible in the browser. The user will only be able to order the shopping cart when this error message is gone.
Best Regards,
Olaf

CO-PA : How to define separate value fields for Revenue & Incoming SO

Similar Messages

Maybe you are looking for