CO12- Yield quantity gets zeroed out for some plants.

Hi Experts,
While confirmation using CO12- collective confirmation, i get a message "Total confirmed quantity does not equal planned quantity"( ECC6.0 system). Moreover for few plants, the yield is zeroed out, eventhough i enter the planned qty and after confirmation is executed, the yield shown is zero for those confirmed operations.
1. Why does the message "Total confirmed quantity does not equal planned quantity" appear eventhough i enter the planned operation quantity for confirmation?
2. Why does the yield quantity zeroed out for some plant? (maybe for some material also)?
Any pointers would be of great help.
Thanks,
SudhaharN

In OPk4, Confirmation parameters, for ur plant and order type combinaation, check the tab "operation indiv.entry initial screen. "
In that tick the Quantities PROPOSED..
u ll get away from the issue...
hope this helps..
karthick

Similar Messages

CO12-Yield quantity shown is zero even after confirmation with correct qty.

Hi Experts,
While confirmation using CO12- collective confirmation, i get a message "Total confirmed quantity does not equal planned quantity"( ECC6.0 system). Moreover for few plants, the yield is zeroed out, eventhough i enter the planned qty and after confirmation is executed, the yield shown is zero for those confirmed operations.
1. Why does the message "Total confirmed quantity does not equal planned quantity" appear eventhough i enter the planned operation quantity for confirmation?
2. Why does the yield quantity zeroed out for some plant? (maybe for some material)?
Any pointers would be of great help.
Thanks,
SudhaharN

Hi,
Answers to your questions are,
1. Why does the message "Total confirmed quantity does not equal planned quantity" appear eventhough i enter the planned operation quantity for confirmation?
Total confirmation quantity for that particular operation is exceeding the actual Qty.
You can check in CO14 how much it is already confirmed.
2. Why does the yield quantity zeroed out for some plant? (maybe for some material)?
Check setting in OPKI (for collective conf) wether you have selected the option Qtys immeed.
This will propose you the remaining qty in CO12 you need not to enter.
Give points if this is useful.
Regards,
Vinayak.

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is j

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.) It happens for about 10 of 30/40 files approximately . Thank you, Kathryn

I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.

Canon MP780 Color Option, Quality and Media, etc crossed out for SOME apps

Hi,
I have a Canon MP 780 attached to an old G4 macbook (running 10.4.11) that I'm using as a print server via printer sharing. I'm sending print jobs from a MBPro 2.4 GHz Core Duo running Snow Leopard (10.6.2)
Before I updated to Snow Leopard, all the MP 780 printer functions worked perfectly. Now the Color Options, Quality and Media, Duplex Printing, Special Effects, Borderless Printing and Duplex Printing are crossed out for some application, but not for others. For example, I can print in Duplex from Microsoft Word and Pages, but not from Preview or Safari.
If I do the print job directly from the old MB that's acting as the print server, all the options are available, so this seems to be related to either Snow Leopard or printer sharing.
I have downloaded and installed all the latest drives/software I could find in the CanonUSA website.
Any thoughts on how to get these print services up and running for all my applications?
Thanks!
Pete

Hello Pete,
What you are seeing is a result of using a 32bit driver when using a 64bit application. Preview and Safari are 64bit, while MS Word and Pages are 32bit.
The solution is to use a driver that is written for 64bit (or more so the plugins used with the driver, such as Quality & Media, are 64bit). However, checking the Canon web site, there does not appear to be a 64bit driver available for your model.
So, you could look at forcing the 64bit apps, like Preview and Safari, to open in 32bit mode. With the application closed, find its icon in Finder > Application. Select it and perform a Get Info (File > Get Info or Command I). The Info window that appears will have a button that shows 'Open in 32-bit mode'. Tick this checkbox, close the Info window and then open the application. Now you should find that the Canon plugins such as Quality & Media should be available without the line through them.
Pahu

Getting ZVAT Error for some items

We are getting ZVAT errors for some QC number & line items..
Please provide the cause.

Hi,
I hope you have created ZCST and ZVAT by copying JIN6 & JIN7. Also in V/06 against the above two
condition types, ensure that "D" is assigned to Condition Class and Condition Category.
Go to V/08, select your pricing procedure and check whether you could see any of the
following condition types
a) JCST or JIN1
b) JLST or JIN2
Subsequent to introduction of VAT system in India, both JIN1 & JIN2 were replaced with
JIN6 & JIN7. May be, you would have copied JCST and JLST. Nevertheless, as I already mentioned,
you should check in V/06 for Condition Class and Condition Category.
follow this path -
SPRO Logistics General - Tax on goods movement - India - Basic settings -
Determination of Excise duty - Condition based excise determination -
Assign tax code to company code.
There maintain the tax code to company code. Also mention the tax code for the above condition type in FV11.
rgds
Raj
Edited by: RAJEEV SHARMA on Aug 20, 2010 5:53 PM

Output type in Purchase Orders, erroring out for some users

Hi All,
We have a custom ouput type for PO, say 'ZZZ'. The problem is we do not get this out put type in the message screen of PO for some users and some time it gets populated for the same users. Please help me in understanding this issue as we are unable to track the things.
Thanks,
Amit

Hi
Please check the maintenace of the condition record, Check the key combination used. The conditon records are mainatined based on the organisational parmeters & the Vendor data.
Please check the PO's in whcih the message are not coming automatically & check the combination exist or not as condition records.
You can check the condition records using MN05, MN06
Award points if useful
Thanks & Regards
Kishore

Settings Get Zeroed out after File Export

I just noticed that out of a group of about 110 JPGs I was editing tonight, about 5 of them had their Develop Settings zeroed out after I exported the files.
Examples:
1. One file's Fill Light went from 14 to 0 after File Export.
2. Another file's Fill Light went from 17 to 0 after File Export.
3. Still another file's Black went from 3 to 0; its Brightness went from +5 to 0; it's Contrast went from -1 to 0....all 3 things on the same file zeroed out.
4. Still another file's Black went from 1 to 0, and its Contrast went from -3 to 0.
5. Another file was rotated by .28. After exporting, the rotation in the history went from .28 to 0.
One other problem I saw with at least 2 of these files (different than the 5 above), I had created virtual pictures for these 2 and exported them as TIFFs to Photoshop CS3. After the TIFF file was updated with CS3, it automatically was reimported to LR. There is no "Import" listed in the history, nor is there any "Created Virtual Copy" in the history.
I don't think I'm doing anything wrong; again, there have only been 5 out of about 110 JPGs for which as happened.

I think I have that box checked, but I'm not sure where to find it. I seem to recall having checked something like this before, but, again, I just can't
seem to find where it is. I've checked in Preferences and do not see it, as well as other places.
Anyway, I do not export files to CS3 very often, but I know that every time I do, the edited file gets added back into the LR Catalog when I close out the file in Photoshop CS3. I typically export these files to CS3 keeping the LR adjustments.
I originally had this set of images sorted by File Name. I did that because within this set are pictures taken from 2 different cameras, with two completely different types of file names. I wanted only to work on the images from one camera at a time. While sorted by File Name, the edited file does get added to the Catalog, stacked upon the original file....so, yes, they are side by side.
I did try sorting by Capture Time, but that didn't make any difference.
Because my other problem of settings being zeroed out appeared to be "fixed," I was hoping this problem also would be fixed. But when I tried the same procedure as last night (only with the files sorted by Capture Time instead of by File Name), the same thing happens...there is no "Import" listed in the History panel.
What has been "fixed," however, is that for those few files that I made a Virtual Copy of, the History panel now shows "Create Virtual Copy." I did not do anything to these files. Perhaps the reboot of my computer fixed this. I really don't know.
As mentioned, I do not export files very often to CS3, so this problem may have always existed (not showing "Import").
Thanks for your reply....I'll watch for more in the future, but because the problem happened again this morning, I think it is perhaps a software bug.

Tax can't carry out for some material and Cusomter

Hi,
     We found the following two material at Customer(2811165) can't carry out the VAT for create sales order. But the Tax can carry out for the other customer. The customer(2811165) can carry out the VAT for other material sales order. I checked the customer and material the Contry code(KR) and Tax classification(1) is correct and normal. It is only the two material for the special customer can't get the VAT. I check the pricing analysis. The follwoing is the log. Pls help check it.Thanks.
The mateials:
      KTPJC001-02
      KF-8005-0XXXXXXXXX
The following is the log:
Access Message Description
08 010 Access not executed (Requirement 008 not fulfilled)
10 010 Access not executed (Requirement 007 not fulfilled)
20 010 Access not executed (Requirement 008 not fulfilled)
Best Regards
Park

Dear Park
It seems you have assigned Routine 008 for the table which has the combination of some description and applicable to domestic. For the same combination, in VK13 / UTXJ, you have maintained a tax code for a domestic customer and you are trying to create a domestic sale order. Actually routine 008 is meant for Exports and hence the problem.
If my understanding is correct, Go to V/07, select the condition type JIND and click on "Accesses". There check whether any routine is maintained under the tab "Requirement".   If so, just remove those routines and retry your process.
thanks
G. Lakshmipathi

Not able to get font style for some fonts

Hi,
I am getting font style(like regular, bold, italic etc) like this-
while (count < fontCount) {//loop , which iterate throgh used fonts.
                                                  ATE::IFont currentFont = fontRefArray.Item(count);
                                                  if (!currentFont.IsNull()) {
                                                            FontRef fontRef = currentFont.GetRef();
                                                            AIFontKey fontKey = NULL;
                                                            result = sAIFont->FontKeyFromFont(fontRef, &fontKey);
                                                            result = sAIFont->GetUserFontName(fontKey, fontname, 50);
                                                            result = sAIFont->GetPostScriptFontName(fontKey, psname, 50);
                                                            result = sAIFont->GetFontStyleName(fontKey, stylename, 50);
                                                            result = sAIFont->GetFontFamilyUIName(fontKey, familyname, 50);
For some fonts(not all the fonts) , Style name is comming as empty string, however for other fonts its working. Not sure why its working for some fonts and not for others. Other font properties are coming fine for all fonts.
When its failing, result is not kNoErr, but i dont know that how to get the exact error?Please help me in this issue.
Regards,
Harsh

Hi A. Patterson,
Thanks for your suggestion.
I tried GetFontStyleUINameUnicode() also but its also returning the emply string for style name for some of the fonts only difference is that error is kNoErr for all fonts. May be there is some problem with those specific fonts(who knows? ). m keep digging this.
Regards,
Harsh

PO Information is grad out for some of the employees in the assignment

Hi All,
I am facing an issue in the People--> Assignment--> "Purchase Order Information" tab.
For some of the employees the accounting flexfield is updatable but for some of the employees it's graded out.
Kindly provide route cause for this.
Thanks and Regards,
Joshna.

Theree was some problem with the Security rules. I deleted the rules it's working fine now.
Joshna.

Open in Camera raw grayed out for some tifs not others, bridge

I searched but could not find a solution. CSR. PC. Windows xp. In CS4 Bridge the option to open with Camera raw is grayed out in the file menu for some tifs and not others - It shows up grayed out on the file menu, but doesn't show at all when right clicking, even with the files where open with camera raw is not grayed out in the file menu. I have purged the cache, deleted all temp files, closed both bridge and photoshop and still I cannot open the tif in camera raw. It is grayed out. If I go to the pic I touched up yesterday the option is not grayed out. Does anyone know how I can fix this?

RJ Dougall wrote:
My intent is to batch process in Camera Raw -- my preferences have always been set to use camera raw for TIF and JPG files, and I have never had a problem accessing Camera Raw either directly in PhotoShop itself, or Bridge.
Please e-mail me a copy of your response to [email protected]
Uh, this is a forum...not an email tech support organization...
As for your issue, it's simply not clear what you are doing or what issue you have. Can you not open the scanned images via Camera Raw from within Bridge? If you can then you will need to go through each image and adjust the ACR settings before you would be able to process them. Depending on how you set up your actions, Photoshop's Batch may or may not catch settings...that part is pretty complicated.
Also, I would question your use of JPEGs vs TIFFs. I would suggest scanning as 16 bit TIFF and running those through Camera Raw...you will be loosing a lot to scan into 8 bit JPEG and then re-running through Camera Raw. You really want to be sending ACR 16 bit images...

I keep getting shut out of some of my games and videos

Does anyone else get shut out of games and videos when trying to play or watch

Load the web page. After the page is loaded, click the down arrow
next to the AdBlock icon. Now select '''Disable on <web site>.'''
Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift><br> ''(Mac Options)'' ''' key, and then starting Firefox. Is the problem still there?
Update your Flash Player '''Version 17.0.0.134<br>https://www.adobe.com/products/flashplayer/distribution3.html'''
See if there are updates for your graphics drivers
https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

No audio (line-out) for some QT and all Real Player

This is strange.
This link, which uses Quicktime, will only play SOUND via my internal speakers: http://www.umeportal.com/player.aspx?fid=393&ftyp=3&pgid=7&hid=13728&fp=qt
While this link will play SOUND via external speakers: http://www.apple.com/getamac/
Same with all the HD trailers: http://www.apple.com/trailers/ The the SOUND plays externally ok.
Here's another one that will ONLY play from internal speakers: http://www6.islandrecords.com/site/promo/quicktime/killersbonesquicktime.html
Real player, will play SOME mov files externally, but most others mp3, mpg, mov, will ONLY play via internal speakers.
Ok, what gives?

Ugh....nevermind.
I removed USB Overdrive and external audio started working for everything.
This is strange becaues I have been using USB overdrive for about a week w/out any issues.
At the time I noticed the problem...I had been using QT to convert mov files to h.264, mpeg4, Sorensen 3 files and for some reason, using the QT export features -- with USB Overdrive installed -- mucked up audio play back. Go figure.
Mac Pro 3Ghz/2GB RAM/ATI Radeon X1900 XT Mac OS X (10.4.3)

Trying to install adobe acrobat pro 9 on a new laptop after deactivating it on old laptop. After installation I get Update check for some reason then doesn't let me go any further Anyone know why this is?

OK so I have deactivated and uninstall the version off the old laptop, then reinstalled the version on the new laptop. When you go to open a document it says it wants to do an upgrade check for some reason, anyone know why this is? It will not take the serial number after that and it doesn't show the version we have in the drop down list.

Hi johnb49273320,
What operating system are you running on the new laptop? If it's a current OS, then it may be incompatible with Acrobat 9. Please see https://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-acrobat-family-prod ucts.html.
It could also be that you're trying to install an upgrade, and the installer is looking for the serial number for the previous version (is the previous version listed in the drop-down list?).
Best,
Sara

Roll out for new plant need some informations

Hi,
We are going to roll out for our 2nd plant. So I need your help.
I am explaining the scenario,
Current scenario is: we have two manufacturing plants (ex:-one in noida and another in gurgaon) and in both plants we have six product line (in A plant=3, in B plant=3).
For both plants we are using one Company code (1000). and we are not using the business area.
But now the problem is this, that management wants separate reporting (P&l statement and Balance sheet) Plant wise and Product wise.
We decide to create a separate co- code for 2nd plant and six business area for product lines.
(In this regards I need your suggestions that how can we define the enterprise structure)
Please tell me
1. what new configurations we need to be done for new co-code?
2. In which areas business area will be affected and how and where we will assign the business area?
3. As we are doing transaction in sap since last year and we are doing this roll out in mid of 2008 so what will be the impact on the business.
4. How we will transfer the transactional data from one co-code to another, because data of both plants lies in previous co-code(1000).
Data like:- A. Transfer of General ledger balances
          B. Transfer of open line items of General ledgers
          C. Transfer of asset and accumulated depreciation from one co code to another.
          D. Controlling transfer postings.
          E. Customer / Vendor open items and balances transfer posting. Etc
If someone knew about something more to be taken care of, please guide so that we can successfully complete the roll out.
Please advice me, its urgent. if any one can give me his mobile to make me understood i can call to him .
Thanks and regards
Kuldeep singh

if they want to a seperate P&L and B/S the why dont you make them as profit centers where you can take a P&L n B/S. at this level

CO12- Yield quantity gets zeroed out for some plants.

Similar Messages

Maybe you are looking for