Code for reading Custom Shape Files?

Hello,
Can anyone please point me to information regaring
the CSH file format? (the regular file format pdf does
not containt that information).
Thanks
Sol

Lichtzeichenanlage wrote:
I bet you have to code it per format.
Remains to be seen - what I'm doing is pretty narrow in scope.
Lichtzeichenanlage wrote:
plugin #1 (XmpEdit) - I just need to update xmp metadata in TIFs & DNGs.
If I remember correctly, LR writes this data into those data into the files if you press Strg + S or if you configure LR to write allways into the xmp files. If this does not work for you, perhaps http://www.sno.phy.queensu.ca/~phil/exiftool/ or http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4529&fileID=4219 can provide more options to you.
Having Lr do it for me wouldn't work, but calling exiftool and harvesting the return stuff from stdout may be better than what I'm doing now - thanks.
Lichtzeichenanlage wrote:
plugin #2 (Lr <--> NX2 Interface) - I just need to update the main image in a cooked NEF.
Call me conservative, but I'm really not a fan of writing in these files. It might work with and SDK, but I think there is no public SDK for it.
In addition I think it is not possible to translate LRs Development-Settings into NX Settings and NX Settings into LR. By updateing the preview you just have a preview with wrong parameters. Sounds week to me. But I would be glad if you can convince that I am wrong.
Most people think I'm crazy. There is no support in the Nikon-SDK for it, but all I need to update is the main rgb image - nothing else.
Thanks,
Rob

Similar Messages

Code for reading particular fields from the file placed in application

hi,
code for reading particular fields from the file placed in application server in to the internal table.

Hi,
Use the GUI_UPLOAD FM to upload the File into ur Internal Table.
DATA : FILE_TABLE TYPE FILE_TABLE OCCURS 0,
 fwa TYPE FILE_TABLE,
 FILENAME TYPE STRING,
 RC TYPE I.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
 WINDOW_TITLE = 'Open File'
 DEFAULT_EXTENSION =
 DEFAULT_FILENAME =
 FILE_FILTER =
 INITIAL_DIRECTORY =
 MULTISELECTION =
 WITH_ENCODING =
CHANGING
 FILE_TABLE = FILE_TABLE
 RC = RC
 USER_ACTION =
 FILE_ENCODING =
EXCEPTIONS
 FILE_OPEN_DIALOG_FAILED = 1
 CNTL_ERROR = 2
 ERROR_NO_GUI = 3
 NOT_SUPPORTED_BY_GUI = 4
 others = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE FILE_TABLE INDEX 1 into fwa.
FILENAME = fwa-FILENAME.
 CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 filename = filename
 FILETYPE = 'DAT'
 IMPORTING
 FILELENGTH =
 TABLES
 data_tab = itab
 EXCEPTIONS
 file_open_error = 1
 file_read_error = 2
 no_batch = 3
 gui_refuse_filetransfer = 4
 invalid_type = 5
 OTHERS = 6 .
 IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
Regards,
Balakumar.G
Reward Points if helpful.

How to write a code for open new txt file in swing

hai all,
now i do one project in java.that project's GUI is Swing. But i don't known swing (basic).So how to write a code for open new txt file and "Open window " in menu item on swing.that means when i click the "New" on menu that time open a new txt file. open also like that type.
plz give me that code ! very urgent
Advance Thanks !
RSK

Swing Tutorial:
http://java.sun.com/docs/books/tutorial/uiswing/index.html
Since you don't know the basic of swing read the tutorial, it is for your own good because it is useless if we provide you with a code you don't even understand and how it works.
If you want a menu read the tutorial about using menus and for opening a file read using JFileChooser.
note: don't use the word urgent because it implies that your problem is more important than others.

Java.lang.NullPointerException in the code to read a properties file

I have written the following code to read a properties file...........

public Property(String fileName)
 try
 InputStream is = MyClassName.class.getClass().getClassLoader().getResourceAsStream(fileName);
 prop.load(is);
 is.close();
 catch (Exception ex)
 System.out.println("The Exception is: " + ex.getMessage());
 ex.printStackTrace();

But this code is giving java.lang.NullPointerException at prop.load(is) 
please help me....
regards
Brahmachaitanya

hi,
 If you are loading a resource (property) file from a jar file you can use
getResourceAsStream("com/test/test.properties").
 if the propery file is in outside of your jar file . you can use
Property portalProps = new Property ();
try {
 FileInputStream fileInputStream = new FileInputStream("<FilePath + FileName>");
 portalProps.load(fileInputStream);
 fileInputStream.close();
 } catch (IOException e) {
 //Log the error
refer the following link for more details
http://www.javaworld.com/javaworld/javaqa/2003-08/01-qa-0808-property.html

Needed a code for Creating a Log File in java so that its size is limited

Hi
I need the code for developing a log file using threads so that the log file size is limited
and if the size of the log file is increasing above 1Mb,another log file has to be created automatically and the log have to be printed into that new file.
Thanks in advance

package cms.web.log;
import java.io.*;
import java.util.Calendar;
import cms.web.WebUser;
* Log is generated by JEditor 1.0.0
* @Project : cms
* @Version : 1.0.0
* @Created date : 11:07:40 PM Thursday, 25/07/2002
* @Author :
* @Organization :
* @Copyright : (c) 2002
* An utility class used to write information, especially error messages, to
* log file so that they can be viewed at later time by administrators.
* Extra information such as date & time they occures & where they are thrown...
* are automatically included and append to the end of log file.
* Log files will increase with the format "name_n" where n is file counter
public class Log implements Serializable
 * logs marker
 static final String START= "\n\0";
 * parent directory that contains log files
 private static File parent;
 private PrintStream out;
 private String name;
 * to count how many log for the current stream
 int counter;
 * maximum number of logs for each log file
 int max;
 public static void init(File parent)
 if (!parent.exists())
 parent.mkdirs();
 Log.parent= parent;
 public Log(String name, int max)
 this.name= name;
 this.max= max;
 file= getLastFile();
 counter= countLogs(file);
 out= openStream(file);
 public synchronized void appendLog(String log)
 if (log == null || log.length() == 0)
 return;
 count();
 try {
 out.println(START+ counter+ " | "+ getCurrentTime()+ " | "+ log);
 out.flush();
 } catch (Exception e) {}
 * Append the given log to log file.
 synchronized void appendLog(String msg, WebUser user)
 if (msg == null || msg.length() == 0)
 return;
 count();
 try {
 out.println(START+ counter+ "----------------------------------------------------------");
 out.println(getCurrentTime());
 out.println(user != null? "User:"+ user.getFullName(): "User: public user");
 out.println(msg);
 out.println("\n----------------------------- end -----------------------------\n");
 out.flush();
 } catch (Exception e) {}
 * Append the given exception to log file
 synchronized void appendLog(Throwable error, WebUser user)
 if (error == null)
 return;
 count();
 synchronized (out)
 try {
 out.println(START+ counter+ "----------------------------------------------------------");
 out.println("Exception occured at "+ getCurrentTime());
 out.println(user != null? "User: "+ user.getFullName(): "User: public user");
 error.printStackTrace(out);
 out.println("----------------------------- end -----------------------------\n");
 out.flush();
 } catch (Exception e) {}
 private String getCurrentTime()
 Calendar c= Calendar.getInstance();
 return
 parse(c.get(Calendar.HOUR_OF_DAY))+ ":"+ // 0 --> 23
 parse(c.get(Calendar.MINUTE))+ ":"+ // 0 --> 59
 parse(c.get(Calendar.SECOND))+ " "+ // 0 --> 59
 parse(c.get(Calendar.DAY_OF_MONTH))+ "/"+ // 1 --> 31
 parse(c.get(Calendar.MONTH)+ 1)+ "/"+ // 1 --> 12
 c.get(Calendar.YEAR); // yyyy
 private String parse(int n)
 return n< 10? "0"+ n: ""+ n;
 private void count()
 counter++;
 if (counter> max)
 incrementFile();
 counter= 1;
 private void incrementFile()
 File file= null;
 int n= 0;
 while ((file= new File(parent, name+ n+ ".log")).exists())
 n++;
 if (out != null)
 out.close();
 out= openStream(file);
 private PrintStream openStream(File file)
 try {
 if (file.exists())
 return new PrintStream(new FileOutputStream(file.getPath(), true));
 else
 return new PrintStream(new FileOutputStream(file.getPath()));
 } catch (IOException e) {
 throw new RuntimeException(e.getMessage());
 private int countLogs(File file)
 int count= 0;
 InputStream in= null;
 try {
 in= new FileInputStream(file);
 int n;
 while ((n= in.read()) != -1)
 if (n == '\0')
 count++;
 } catch (IOException e) {
 } finally {
 if (in != null)
 try {
 in.close();
 } catch (IOException e) {}
 return count;
 private File getLastFile()
 File file= new File(parent, name+ "0.log");
 File curr;
 int n= 1;
 while ((curr= new File(parent, name+ n+ ".log")).exists())
 file= curr;
 n++;
 return file;
 protected void finalized()
 if (out != null)
 out.close();

Problem reading custom property file from custom event handler.

Hi,
My custom event handler needs some bits of information that I have set up in a property file. However, when the event handler runs it throws a FileNotFound exception - actually its because permission was denied.
I have added the code System.getProperty("user.name") to find out the actual user that the event handler is running as. It reports that "oracle" is the user.
That's great. However, the permissions on the file will allow oracle to read/write the file. If I log onto the server where OCDB runs (as oracle), I can vi the file.
The file is owned by another user, but the "oracle" is a member of the group that has read/write (we're running on a unix box). The file is not 777.
The event handler is actually calling a static utility method that returns the Properties. This utility is used elsewhere in other custom apps in conjunction with OCDB (on the same server). It works there, so the utility is functioning correctly.
Is there something going on that I'm missing? Like somehow the event handler is acually runn as somebody else?
Here is the node log.
2007/07/17 12:52:16 [oracle.ifs] [37] 434364 system FINE: Error /opt/csc/sfi/configuration/sfi.properties (Permission
denied) Additional INFO: java.io.FileNotFoundException: /opt/csc/sfi/configuration/sfi.properties (Permission denied)
Thanks in advance for the help.
Winston

Matt,
Sorry to have wasted your time. It was a server reboot issue. The ocdb server hasn't been restarted since early July. We added the users and groups late last week. Although we tested on line, the server wasn't quite up to speed with the new changes.
We bounced the server and all is well.
Thanks
Winston

Disable Save or Save As for Read Only mpp file

Hi,
I have a read only mpp file and need to make sure that it cannot be Saved / Saved As by anybody in Team. They should only have access to view the file.
How can enable a file which does not allow save / save as?

ihvarrived,
You didn't mention anything about being in a Project Server environment, so I assume Shiva's response has no meaning for you.
With regard to an approach to prevent unauthorized users from saving a file let me again stress that, in my opinion, the best approach for this issue is training. That has the great advantage of mutual respect and cooperative effort in a team environment.
To implement a more covert approach you will need to do the following:
1. With the file open go to Developer/Code group/Visual Basic
2. Hit the Project Explorer icon
3. In the Explorer hierarchy, under the VBAProject double click on the "ThisProject"
4. In the code window, paste the following code:
Private Sub project_open(ByVal pj As MSProject.Project)
MsgBox "This file is write protected. You can make changes" & vbCr & _
 "for temporary what-if scenarios, but you will not be" & vbCr & _
 "able to save without the correct password", vbExclamation, "Warning!"
End Sub
Private Sub project_beforesave(ByVal pj As MSProject.Project)
pass = InputBox("enter save password")
If pass <> "xyz" Then 'string in quotes is the password you chose for saving, "xyz" is for illustration only
 SelectAll
 EditDelete
End If
End Sub
5. While still in the code window, go to Tools/VBA Project Properties/Protection tab
6. Check the "Lock this project" option
7. Enter and confirm a password. It can be the same as your save password or a different password (This will insure that only you can view and modify the above code)
8. Hit OK, then File/Save [your filename] to capture your macro in the file. Note, at this point you will be required to enter your save password.
Be advised that if a user does attempt to save without the correct save password, the file will be zeroed out and saved (i.e. nothing). That means that whenever you save the file you should also save a backup under a different name, so you can restore the
file if necessary. I couldn't figure out a good way to work around this problem. If the user always tries a "Save As" this wouldn't be an issue, but if they chose "Save" and you don't have a backup, you're screwed.
If this answers your question or is at least helpful, please mark it accordingly.
John

Java mapping - for reading the binary file contents and changing filename

Hi,
I have already gone through the various bolgs and threads and have not been able to find a solution to my problem.
One blog did give some idea but did not help- "JAAPPING", an alternate way of reading a CSV file
I am not very good in java but have been trying some out recently to fulfill the interface requirements.
I would really appreciate if you could help am I am giving below the detailed scenario below.
Part 1- working fine - The incoming file looks like:
:20:STMEMU096868DUBE
:25:001180256210
:28C:00371/00001
:60F:C090617AED742136,92
:61:0906300630CD34,27FINTCREDIT INTEREST
26MAY2009 TO 25JUN2009
:62F:C090630AED742171,19
:64:C090630AED742171,19
The file name as received is:TCDE.BLQSAM.SAEA2682.C0084025.A9G24T58.20090724195908
This file without any conversion is placed on XI server dircetory folder.
Part 2 - need to develop
The file should now be renamed according to the incoming value in 2nd line - specifically the 12 digit value 001180256210 and placed on the R/3 dircetory folder.
The new file name in the above example should be:
AC_NO_001180256210_datetime
The module for the above was created and the last time I checked it was working.
However, when I wanted to do final testing in Dev and move the changes further, the module has seemed to have stopped working so I need an alternate solution fast.
I was thinking of doing the Java mapping as I will be more in control as to what is going on thereby reducing the dependency.
There is no need to create any target xml structure as the file as it is needs to be placed in the target folder with a new name.
I can get the file name in UDF which I have already created but i am not usre if it working.
Can you please help?
Any help will be greatly appreciated.
Regards,
Archana
+44-7867636863

Hi Stephen
The xml must be getting added in the below part of the code. It is coming from arg[0]
You can put a check and get it removed.
while ((len = arg0.read(buffer)) != -1) {
arg1.write(buffer, 0, len);
Regards
Osman

Sample code to read a text file from UNIX directory.

I am using 9i Developer Suite, application server is 9.0.4. I want some help on how to read a flat file from UNIX environment. A sample code could be very helpful.
In windows, i use this kind of code:-
I declare an object & then write to a file using these sample staements:-
file_handle text_io.file_type;
filename := 'd:\ran\egs\uninvoiced.txt';
file_handle:=text_io.fopen(filename,'w');
text_io.put_line(file_handle, 'MOBILE NO '||'COUPON NO ' || 'DATE');
I hope, my question is clear. Please help in solving the doubt.
Regards.

filename := 'd:\ran\egs\uninvoiced.txt';This is a Windows directory, so it won't work on Unix.
For the rest of the code: see examples in the Forms Builder Online Help.

Sample code for a custom field added to LIS Communication structure for Del

We appended a new custome field into extraction structure of the LO Cookpit datasource 2LIS_02_ITM through RSA6. And then run CMOD to write the exit code to populate the value and it works fine. But after we read Roberto's Weblog:
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
Find the enhancement we did can't make the Delta mechanism works if only this new field gets changed in a record, and the change cannot be reflected on BW. I know we can run SMOD on the enhancement LEINS001 to write the code for LIS Communication structure customer exit. But we have never writen such a code for LIS Communication Structure enhancement and also don't know on how to make the Delta mechanism works in the code. We would be very appreciated if some expert here can provide the sample code!
Thanks

hi AHP,
Have you tried Sanyam's code listed in this article you recommended?
Now our R3 team has added a custom field called ZZZ to EKKO table and I modify the code to suit our need and the code would be as following:
*& Include ZXM06U16 *
DATA: i_t_ekko LIKE ekko OCCURS 1 WITH HEADER LINE.
DATA: ebeln LIKE ekpo-ebeln,
it_ekko TYPE TABLE OF ekko WITH HEADER LINE,
old_val(50) TYPE c. "For storing the value from the Field Symbol
FIELD-SYMBOLS <fs> TYPE ANY TABLE.
CASE zeitp.
WHEN 'MA'. "When creating a purchase order
MOVE '(SAPLEINS)T_EKKO[]' TO old_val.
ASSIGN (old_val) TO <fs>.
i_t_ekko[] = <fs>.
LOOP AT xmcekko.
ebeln = xmcekko-ebeln.
IF xmcekko-supkz = '1'. "Old Value ?
SELECT SINGLE * FROM ekko INTO it_ekko WHERE ebeln = ebeln.
xmcekko-ZZZ = it_ekko-ZZZ.
ELSE. "New Value ?
READ TABLE i_t_ekko WITH KEY ebeln = ebeln.
xmcekko-ZZZ = i_t_ekko-ZZZ.
ENDIF.
MODIFY xmcekko.
ENDLOOP.
EndCase.
The compile of the above code works fine and we activated everywhere including project level. Then we set debug points in this code, and run RSA3 on 2LIS_02_ITM, but find the extraction program never reaches this code or call this user exit function EXIT_SAPLEINS_001 of this enhancement LEINS001. Any reason?
Thanks
Kevin
Message was edited by: Kevin Smith

Strange Error ! For Reading Application Server File

Hi Friends,
I am getting very strange error while compliling my code. As I am reading a text file for input from Application server for further processing. But my system is giving me an error.
As the file and the path is not yet configured on the application server but i believe
it has to allow me to compile the program and when i execute it then it will give an error as I have tracked.
Kindly help.
I have pasted the code below for reference.
===============================
TYPES : BEGIN OF ty_file,
         line(1055) TYPE c,
          end of ty_file.
data : gs_file type ty_file.
data : g_file4 TYPE string VALUE '\usr\sap\CISCO\SP\CISCO_SP_CHG.TXT'.
OPEN DATASET g_file4 IN TEXT MODE FOR INPUT
                         ENCODING DEFAULT
                         WITH SMART LINEFEED.
IF sy-subrc NE 0.
    MESSAGE e012.
    LEAVE LIST-PROCESSING.
ENDIF.
CLEAR : gs_file.
DO.
    READ g_file4 INTO gs_file.
    IF sy-subrc NE 0.
      EXIT.
    ENDIF.
    APPEND gs_file into gt_cust_tmp.
    clear gs_file.
ENDDO.
CLOSE DATASET g_file4.
ERROR i am getting
Unable to interpret g_file4. Possible cause of error "Incorrect Spelling or Comma error".
=======================
Regards,
pradeep

TYPES : BEGIN OF ty_file,
line(1055) TYPE c,
end of ty_file.
data : gs_file type ty_file.
data gt_cust_tmp type table of ty_file.
data : g_file4 TYPE string VALUE '\usr\sap\CISCO\SP\CISCO_SP_CHG.TXT'.
OPEN DATASET g_file4 IN TEXT MODE FOR INPUT
ENCODING DEFAULT
WITH SMART LINEFEED.
IF sy-subrc NE 0.
MESSAGE e012.
LEAVE LIST-PROCESSING.
ENDIF.
CLEAR : gs_file.
DO.
READ dataset g_file4 INTO gs_file.
IF sy-subrc NE 0.
EXIT.
ENDIF.
APPEND gs_file to gt_cust_tmp.
clear gs_file.
ENDDO.
CLOSE DATASET g_file4.
check this coding. in the read statement dataset is missing.
with regards,
Vamsi

RFC code for Adding Customer Record

Dear all
Can any body provide RFC code for adding a record
in customer table ( KNA1) ?
regards
- Victor

Victor,
I created a remote-enabled function module (z_customer_create) which calls SD_CUSTOMER_MAINTAIN_ALL. The 'z' function module was published as a web service and is working well. We did have a few hurdles but there are many forum posts for FM SD_CUSTOMER_MAINTAIN_ALL that will help should you run into trouble.

Routine sample code for reading 2 fields from existing DSO

Hi Gurus,
I am a monkey when it comes to write ABAP code. I have one DSO-A where we store accounting info of purchading (from DS 2lis_02_acc) and one DSO-B getting data from 2lis_02_scl data source.
We need to write a rountine to read DSO-A for G/L account and populate DSO-B G/L account field.
Please provide me the sample code for this.
Warm Regards,
Anil

Hi anil,
Create a local table this is type of you source,
Data : LV_table TYPE XXXX
use the select statement to read the table of DSO .You have to use th active table for the dso that you want to read data from.
Select xxxfieldxxx FROM /BIC/A..........50
into lv_table where
filed name of of scheule line probably order no and item no .
<soruce-fields>-IOBELN = IOBELN
and <source-fields>-IOBELP = IOBELP.
Checke the techinal name i am not sure about it. It will be something like that.
Cheers mate

Set a timeout for "read from text file"

I Need to read from a text file on a remote pc and use the read from text file function to do this. It wotks but sometimes this pc is down causing long wait times in my vi.
Is there a way to set a timeout for the read from text file function, or is there an other solution?
Thank you

You could check that the path is valid first before you attempt to read the file. hen put the file read in a True-False case structure based on the results of the check. You can use the function "Check if File or Folder Exists" It checks whether a file or folder exists on disk at a specified path. This VI works with standard files and folders as well as files in LLB files. The function is found in the File I/O --> Advanced File Functions palette.
Tom

What's the best way for reading this binary file?

I've written a program that acquires data from a DAQmx card and writes it on a binary file (attached file and picture). The data that I'm acquiring comes from 8 channels, at 2.5MS/s for, at least, 5 seconds. What's the best way of reading this binary file, knowing that:
-I'll need it also on graphics (only after acquiring)
-I also need to see these values and use them later in Matlab.
I've tried the "Array to Spreadsheet String", but LabView goes out of memory (even if I don't use all of the 8 channels, but only 1).
LabView 8.6
Solved!
Go to Solution.
Attachments:
AcquireWrite02.vi ‏15 KB
myvi.jpg ‏55 KB

But my real problem, at least now, is how can I divide the information to get not only one graphic but eight?
I can read the file, but I get this (with only two channels):
So what I tried was, using a for loop, saving 250 elements in different arrays and then writing it to the .txt file. But it doesn't come right... I used 250 because that's what I got from the graphic: at each 250 points it plots the other channel.
Am I missing something here? How should I treat the information coming from the binary file, if not the way I'm doing?
(attached are the .vi files I'm using to save in the .txt format)
(EDITED. I just saw that I was dividing my graph's data in 4 just before plotting it... so It isn't 250 but 1000 elements for each channel... Still, the problem has not been solved)
Message Edited by Danigno on 11-17-2008 08:47 AM
Attachments:
mygraph.jpg ‏280 KB
Read Binary File and Save as txt - 2 channels - with SetFilePosition.vi ‏14 KB
Read Binary File and Save as txt - with SetFilePosition_b_save2files_with_array.vi ‏14 KB

Code for reading Custom Shape Files?

Similar Messages

Maybe you are looking for