Code groups, codes & selected sets during UD

Dear Friends,
Can I create my own catalog types.
I have created my own catalog types.
1) For Usage Decision (R)
2) For Defets recording (P)
During defect recording the system is picking the code groups & codes created by me and which are assigned . It is not showing other ones.
But during Usage decision it is picking all the code groups, codes & selected sets attached to standard UD catalog "3".
I am unable to understand how the system is behaving like this.
I have created my own notification type Y1. I have created my Catalog profile (YQM000001).
I have assigned this profile to inspection type.
I have assigned this notification type to inspection type.
In the catalog profile YQM000001, I have assigned two catalogs (R & P).
In catalogs & catalog profile for notification type, problems field assigned the catalog type "P".
One more issue while recording the defects I am getting notification type as Y1 (created by me) but the catalog profile is showing standard one "QM0000001".
I am unable to understand these all. Do anybody has got any solution.

Dear Anuradha,
There is no need to create separate catalog type for your problem of displaying specific UD codes while giving user decision. You can assign the specific 'UD selected set' from catalog type 3 ( User decision) in SPRO ' Maintain inspection type' for QM. Following is the path you can assign the desired UD option you need to see while recording UD:
SPRO >> Quality Management >> Quality Inspection >> Inspection lot creation >> Maintain inspection types >>execute >> select the inspection type say '01' and view details >> there will be field UD selected set, assign the specific selected set made for your plant and save.
By doing this when you go for giving any UD, codes defined by you only will be displayed (not all).
Didn't understand your issue related to notification, but in same above screen you can also assign notification type for particular insp. type.
Looking at your requirement there is no need to create separate insp type or notification type just make proper use of existing one and do proper assignment.
Please let me know if you have any problem in resolving this.
Best Regards,
Shekhar

Similar Messages

Where Used for Code groups or Selected Sets

Dear all,
can any body plz tell me how can i know which code group or selected set is used in what qualitative MICs.
either any report or transaction...
thanks in advance
zeeshan

Hi Zeeshan,
According to my information,,,
For Code Group
In QS41/42/43/44, reach up to the second screen "Change View: Codes" Overview. And then click on the "Used in Selected Set" Or short key "CntrlShiftF3"
For Selected Set.
I think no such std sap report is available. But what you can do is use the work bench CWBQM in display mode,,,,,
- CWBQM---> select the "Current Working Area" as "Q_OPR_000000000010".
- Apply the Basic Selection or Additional Selection Criteria" and then press Cntrl+F7.
- the list of the MIC data will be available here.
Or
You have to write done a query SQVI
Or
Develop a customized report.
Regards,
Shyamal

QM Catalogs / Codes / Selected Sets

Hi,
Can any one please explain what exactly are Catalogs, Code groups, Selected Sets and their codes?
Regards,
Pavan

hello
1) Catalog are codes defined to manage and standardize information. It consists a set of codes which can be used for different functions
In Standard SAP different catalogs are defined for 1. characteristic attribute u2013 mailing used for qualitative result recording . 2.- task catalog 9 . defect catalog, E u2013 Defect locations etc.
This helps in analysis better
2) Code groups are defined within a catalog type
For eg in catalog 1 characteristic attribute you can define colour as code group. Code group actually holds a set of codes
3) Codes make up the lowest level of a catalog. They can describe, for example, a characteristic attribute, a defect type, a defect location or a usage decision.
For eg for code group colour the codes can green , yellow, white etc
4) Selected sets define whether a particular code is accepted or rejected. This defined for each plan
So code group colour , code green is acceptable, yellow is rejected
You can check this link which has given all the details
Link: [http://help.sap.com/saphelp_47x200/helpdata/en/2d/350910448c11d189420000e829fbbd/frameset.htm]
Regards
Gajesh

Using filter in selection sets during migration

Hi,
Can I use filter during creation of selection sets to select data related on a specific operating unit only?
If so how to achive that requirement?
Thanks,
Indu.

Yes, it is possible. You can use Financial Operating Unit Level Setup selection set. If you set filter (say OU100) at Operating Unit, then it would extract Inventory Organization, Payable Options, etc under OU100.
Please let me know if you are looking for something else.

Code group & selected sets

Can anybody please tell me,
Why & when it is necessary to maintain code group & selected sets. Where it is then use. What is releation between them.Will appreciate if explain with suitable example from industry. Please helpout.Newcomer in QM.

HI
code groups are used in Notifications and quality result parameters.
Code groups are used to combine and structure codes within a catalog type
code groups at client level to group codes that have the same contents or relate to one another, within a catalog type. Codes, that are assigned to a code group are also known as group codes.
When you maintain the code group index, the system locks the required catalog type for other users. However, if you use the individual maintenance function, only the required code group is locked.
these are can ot create by plant wise.
1.when you have material which measures by means of color then you canhave code group color and codes of red ,black etc..
2.if you have defect codes then you can mention them
3.if you have problems of perticular part, then in notification by use of codegroups and codes you can enter the data.
A selected set contains a combination of different codes at plant level, for example, coded descriptions of characteristic attributes (such as color, shape, surface characteristics), defect causes or usage decisions from different code groups.
selected sets to combine codes from several code groups for processing that are allowed or useful for a particular application.
Codes that are copied into a selected set are known as set codes.
When you maintain the selected set index, the system locks the required catalog type for other users. However, if you use the individual maintenance function, only the required selected set is locked.
4.with combinationof code and code groups you can create the selected sets , canbe used in Usage decission.(ex:aprroved, no approved,ok, not ok etc)
Code groups are createsd by Qs41
Logistics ® Quality management ® Quality planning ® Basic data ® Catalog ® Code group ® Edit
Selected sets are created by QS51
Logistics ® Quality management ® Quality planning ® Basic data ® Catalog ® Selected set ® Edit
-ashok

Extension of MIC/code-group/selected set to other plants

Hi Experts,
In any plant even if we do not extend the MICs, groups and selected sets, we can go ahead with result recording and usage decision if we can include the MIC/selected set, etc. from some other plant in the inspection plan. Is it therefore necessary to extend these parameters to all plants in the landscape ? Experts please suggest if there is any other reason for extension.
Best regards
Sm.

No. The plan is assigned automatically. If the only assignment is to the central plan then the central plan will be picked automatically.
When you go into the material assignment you enter in the plant Id for the material being assigned.
If material 1000023 is in plants 1000, 1001, 10002 and 1003 and you create the plan in plant 1000 you would then have 4 assignment in the plan assignment area of the plan.
1 1000 1000023
1 1001 1000023
1 1002 1000023
1 1003 1000023
(1 is the group counter)
The automatic search for the plan is not limited to plans in the plant of the inspectiion lot.
FF

Catalogs and selected sets

Hi, how catalogs qs41 and selected sets qs51 are related? can u pls explain with one example?

Hi
There is one best thread for this....
Re: Code group & selected sets
In addition to that
catalogs : Are the code Gr & codes.
selected sets :Selected set are the codes which are from different code gruops in simple language.
Say example defect code 9:
code gr X -->has codes
                               A:
                               B:
                               C:
Code Gr Y-->has codes
                                  E:
                                  F:
                                  G:
Now I will create a selected set with codes like
Selected set XY-->has codes
                                           A:
                                            C:
                                            F:
                                            G:
That means from different code grups I have selected some codes which I have added in one selected set.
similerly only few codes of one code group can be added in to selected set.
This is advantage of selected set.& how they are related.
Regards
Sujit

Selected set assignment to code group

I have maintained a catalog " S", under which i have maintained code groups and codes in QS41, but here the usage indicator is deactive. I cannot select it.
Now when i use QS51,i am unable to view the codes. the selected set is empty. In this case how to assign the code groups and codes to seleccted set.
any help, i am new to qm

There is some confusion you have in code gr & selected set.
In simple words -->in QS41 you create defect codes & code gr for catalo types like 1,3,9 etc.
But in QS51 you combine different codes from code grs to form selected sets.Practically selected sets are only used for Characteristics attributes(1) and Usage decision(3) and by default they carry valuations.
For catalog defect type (9) I would suggest to add and create your own codes and code groups as per business requirement in QS41.You should not actually create selected set for catalog 9.
for more details refer :
http://help.sap.com/saphelp_40b/helpdata/en/2d/3508f6448c11d189420000e829fbbd/content.htm

UD - Selected set code does not exist

Dear All,
We have create material in 0001 plant. It is consumable material and QA is not required. But by mistake Inspection flag was activited in material master.
Now material received is in QA Stock. We have created inspection plan and not inspection lot is in REL status.
During UD system shows following message :
"Selected set code does not exist, or data entered is incomplete"
Is there any way to take stock in unrestricted without doing any QA activity ?
Thanks and Regards,
Nirav

Hi,
Why don't you simply complete the Stock posting using 'Inspection lot stock' tab in QA32?
If you only need to take the stock out of QI and doesn't need Usage decision then why do bother about it.
Besides, this error comes when the UD selected set defined in Configuration is not maintained for the Plant.
To check this, Follow this path,
QCC0> Quality inspection> Maintain inspection type. Select the Relative inspection type and see what is maintained.
Once you maintain this Selected set for the plant 0001 using QS51, you won't get this error. Other way, define that selected set in the configuration which is already maintained for the plant.
ntn

Selected Set codes problem in QS41

Dear Experts
I am working in a support environment.
I need to change the description of selected set code which has already created in QS51.
The problem here is, the codes under a particular code group is shown in QS51 but it is missing in QS41.
Normally after creating the codes in QS41, we assign it in QS51.
In my case it is not there in QS41 but it is assigned in QS51 and description is greyed out in QS51.
Please help me to solve this issue.
Thanks & Regards
Bala

Dear Bala
Please check the reason why these codes are missing. There might be some deletion.
What you can do is create these datas again in QS41 and then update the QS51 again. This is the only possibility I see
Regards
Gajesh

Selected Sets for Catalog code - 9

Dear all,
I am aware that Selected sets can be created only for Catalog type 1 & 3. But in our business we have classified different type of defect codes in type 9. Evenhough I am attaching specific catalog defect type in MIC, when I see it in the notification screen, whole list of defect type is showing. Is there any possibility to group the defect codes according to the plant? (For your info - We have 4 different plant and each one of them has to use different catalog type as product manufactured is different)
Regards,
R.Ponniah ;

hi,
Use catalog profile for specific defect type, plant wise it is not possible in std SAP, better to define catalog profile and assign all defect type code grp. in that profile and assign that profile with ur notification type. goto config (SPRO)-> Quality Notification>Defect Recording-> define notification type----> and maintain all in that pop- up one by one.
Defect type is not plant specific.
Regards
Edited by: D GURU on Jan 17, 2012 8:26 AM

Displaying long text maintained for selected set codes in result recording

Hi Gurus,
I have maintained qualitative mic.For this mic i have defined selected set codes & for these selected set codes i have maintained long text.
My client requirement is that this long text should be visible while doing result recording for the mic.Is this possible.
Regards
Amit

How can they expect that? Long text can be... well.. long....... How can you include that on the same screen as results recording. What if you have 5 charac with long text? What if each selected set choice has long text and you had two choices for each? That's ten sections of long text on one screen? Impossible.
Printing the long text on the cert shouldn't be a problem. You just have to get someone to code it into the layout set.
Craig

Peculiar problem in LDB ADA with company code selection

<h5>Hello Colleagues, </h5>
Faced a peculiar problem with company code selections in LDB ADA. Entered depreciation area, dep posting perios, lower and higher value of company code and would like to except few companies from selections. On pressing extension button, error message "Depreciation area 01 is not defined in chart of depreciation" is popping up and not allowing to provide exceptions for company codes. But working well in development systems. We are using ECC 6.0 systems and in both systems we have same lines of code for SAPDBADA.
During debug, found that in development system, control coming to initial statements after PAI event. But in other systems, control skips few initial commands after PAI and directly jumps to later commands. Due to this FNAME parameter in PAI subroutine setting with '*' in other systems and 'BUKRS' in dev system.
Could anybody give me some thoughts of why system behaving differently?
Thanks and Regards,
Prasanth

Some - or most? - ODBC driver, especially MS for SQLServer and Access, don't support these advanced JDBC features.
Like the messages says: they are optional features, and the driver doesn't implement them.
A good news:
you don't need them.
Just go through your ResultSets only forward by next(), and do all inserts, updates and deletes with executeUpdate() and SQL commands.

SRM 7.0 company code selection for manual PO

Dear All,
We use SRM 7.0 and I have created a purchasing group under a central purchasing organization. This purchasing group is responsible from procurement of two different Company Codes. I did all the assignments in responsibility tab and attributes tab under PPOMA_BBP.
When i try to create a manual PO, I don't see any option to select the company code, either in "Overview" tab , nor in "Header" tab.
Does anybody know or help me how to select/enable company code selection for manual PO creation ?
Thanks in advance,
Best regards,

Dear Kumar,
Thanks for the info. In my organization, there are two company codes and apart from them there is a Purchasing Org.
All the attribute settings are done for these company codes. While creating a PO, as there is no field for Company code, system determines the company code automatically in background. (let's say Company code X). But I'm trying to create a PO for company code Y. When I enter the cost center, I got the error "Cannot purchase between company codes".
So how am i going to select company code Y ? How the system will determine company code Y ? Can you please give in details what must i do ??
Thanks in advance,
Best regards,

Received HTTP response code 500 : Error during conversion of XI message

hi
Facing the error , "Received HTTP response code 500 : Error during conversion of XI message"
This is the fist time i am configuring the sender soap ( Axis Framework in the SOAP Adapter) (Quality of service Best effort) communication channel and i am getting the above error did any body face this error.
01.09.2011 12:02:32     Information     The message status was set to DLNG.
01.09.2011 12:02:32     Error     SOAPFault received from Integration Server. ErrorCode/Category: XIServer/ATTRIBUTE_INITIAL; Params: Manifest cid:6D90482BF678436D75928FC8B9930519; AdditionalText: null; ApplicationFaultMessage: null; ErrorStack: Attribute Manifest cid:6D90482BF678436D75928FC8B9930519 is initial
01.09.2011 12:02:32     Error     Transmitting the message using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Error during conversion of XI message.
regards
sandeep
Edited by: pendyalas on Sep 1, 2011 12:20 PM

I found a link with respect to similar error , sap note 1522630 has been used to resolve this error.
i will try and see if it works.
AXIS Sender Adapter Failure after upgrade to PI 7.11 SP06
regards
sandeep

Code groups, codes & selected sets during UD

Similar Messages

Maybe you are looking for