Code highlighting problems in CS4

Hey guys and gals,
I've been using dreamweaver for about a year now as a codeing enviroment for PHP web sites. The last couple of mounths a problem has started occuring randomly when I'm working. The code highlighting starts screwing up. It does one of two things it eaither changes large chunks of the code to be colored like coments, or it all goes black like plain text. If i go to the top of the document and hit enter it changes everything back to normal for a minute or two and then the problem begins again. This obviously isn't a problem that stuns productivity but it is anoying to no end, and stunts my ability to track down mistakes like forgeting a $ .
any one know how to fix this?
thanks in advanced

Similar Messages

How to deal with the code highlight problem of Jekyll in ArchLinux

Seemingly, The code highlight function of Jekyll is required by python-pygments but I use python2 in ArchLinux. I have to install python2-pygments instead but this works not very well because Jekyll needs /usr/bin/pygmentize instead of pygmentize2
Below is a dirty solution:
sudo pacman -S python2-pygments
ln -s /usr/bin/pygmentize2 /usr/bin/pygmentize
Any other good solution? or any plugin of Jekyll can replace python-pygments[2]?
Last edited by caasi (2012-04-23 02:07:14)

domain_uplevel only affects how we do LDAP search. It will have no effect on users that are not in your LDAP,.
Setting up a "domain smarthost" will cause messages addressed to unknown users to be routed to the host placed in the "smarthost". That would handle your issue, as long as the second box is "authoratative" for your domain, and doesn't send messages it doesn't know what to do with, to the Messaging Server.
Or, you could add all the users to your LDAP, and put the "mailhost" to msg2. That will route their mails over to the other box.

Hot Code Replace Problem...

Hi Everyone,
I am using WebLogic 10 with Eclipse. Whenever i start the server in debug mode and make two three changes in the code... WHAM.... I get the Hot Code Replace error. Is there any way so that the server can keep up with the code changes. Publishing the app again takes approx 40 mins!

Almost always this is a limitation of the JRE/JDK you are using and really
nothing to do with Eclipse.
Try a different VM and see if you have better luck
HTH
Darins
"bobz" <[email protected]> wrote in message
news:75257188f239cb376da31e19b214d2d9$[email protected]..
> hi buddies,
>
> i am getting "hot code replace" problem whenever i change my
> java code and build the project and access the website without re-starting
> the server. so, finally i endup with re-starting the server whenever i
> change the code. this consumes a lot of time. is there any possibility to
> work without re-starting the server even after the code change.
>
> regards,
> satish.

Button Navigation & Highlight Problem

I have I believe, a simple button highlight problem. I have a
group of buttons I created on a page and want when button 1 is
clicked it stays highlighted (each button is a MovieClip), and when
another button is clicked the last one clicked gets cleared. All
buttons have this initial AS to start:
this.onRollOver = function(){
this.gotoAndStop("focus"); //button changes colour
this.onRollOut = this.onReleaseOutside = function() {
this.gotoAndStop("no_focus"); //back to original / starting
colour
this.onRelease = function() { //here's where I'm stuck - keep
the button highlighted and 'reset' the last one clicked.
this.gotoAndStop("focus");
this._parent.gotoAndStop("Pic2");
this.onReleaseOutside = this.onRollOut = null;
Any tips on how to make this work?

For anyone able to help, I've change the script on my
buttons: Some buttons still act funny - don't reset or only reset
on rollOver. Any help?
Tjisana
stop();
var num:Number = 3;
//Mouse RollOver function: change colour when mouse passes
over button
this.onRollOver = function() {
if(_global.link != num) {
this.gotoAndStop("focus");
//Mouse or Pointer Rollout & ReleaseOutslide function: go
back to original colour
this.onRollOut = this.onReleaseOutside = function() {
if(_global.link != num) {
this.gotoAndStop("no_focus");
this.onRelease = function() {
if(_global.link != num) {
_global.link=num;
for(var i=1; i<=6; i++) {
this._parent["space" + i].gotoAndStop("1");
this._parent["space" + _global.link].gotoAndStop("1");
this._parent.gotoAndStop("P3"); //change to new picture
this.gotoAndStop("focus"); //keep button highlighted
};

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?

To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

Hi, We use a Mac os window. How can we get Adobe error code 16 problems in premier cs5. Before 6 da

Hi,
We use a Mac os window. How can we get Adobe error code 16 problems in premier cs5. Before 6 days premier does not loaded a Audio.
please help me.

I think you are posting to the wrong forum. I'd post this in the Premier forum: http://forums.adobe.com/community/premiere/premierepro_current
-Carl V.

Code inspector problem

Hi all,
I'm checking the syntax before to release my order requests and I have several errors in code inspector.
Ok, I've fixed these errors. The problem is if I execute the code inspector again the errors are displayed again... but the code is ok, there are no errors.
It happened to me a lot of times, with several object types, may be the next day if I pass the code inspector the errors dissapears or may be not.
It's very strange. I've tried with other users, doing log off and login again... but nothing...
Do you know if exits some transaction code for "refresh" the code inspector? the buffer or something?
Thanks in advance.

Hi,
I've worked with code inspector quite a lot and I've never spoted this kind of problem. I would suspect that this is not code inspector problem but rather something is wrong with your repository objects.
If I were you I would try to debug code inspector. There is somewhere inside SCAN ABAP-SOURCE command used. Check what input is being used.
BR
Marcin Cholewczuk

Problema Illustrator CS4 con Wacom Bamboo Fun

Hola. Tengo una tableta Wacom Bamboo Fun que hasta el momento funcionaba perfectamente con el Illustrator CS. Hasta que hace unos dias instale el Illustrator CS4 y no reconoce ningun tipo de sensibilidad de presión en los pinceles. He configurado la tabla, actualizado los drivers y nada. No se si tiene que estar activa la opción de aerografo y si es asi, no la encuentro en el nuevo CS4.
Por favor, ¿alguien puede ayudarme?

Hola,
GRACIAS por responder de inmediato, hize lo que me aconsejaste, bajé el ultimo driver de la página para el modelo de wacom que tengo, instalé reinicié, y probe en photoshop cs3 y la primera ves me fue bien lueog cambie de número de pincel y se volvio duro. Me preocupa... ojala me puedas seguir ayudando
Atentamente,
Rocio Santos
T: 992483442
W: http://cajadepolillas.blogspot.com/
Date: Mon, 5 Apr 2010 06:07:33 -0600
From: [email protected]
To: [email protected]
Subject: Problema Illustrator CS4 con Wacom Bamboo Fun
Hola Chiox,
Te aconsejo leas detalladamente las instrucciones de tu tableta y cómo configurarla correctamente, al perecer funciona, si has logrado que detecte y aplique varias características una vez con los pinceles de Photoshop CS3, dudo que esté defectuosa.
No hay ninguna incompatibilidad entre las tabletas Wacom y Adobe Photoshop CS3.
Tienes que instalar un driver que en su última version estará en la web de Wacom, y que instala un panel con opciones que tienes que configurar.
Luego en Photoshop tendrás que utilizar el panel de Pinceles (F5) y las opciones disponibles, puedes guardar ajustes (presets) para utilizarlas de nuevo posteriormente.
Photoshop CS4 no es más compatible ni amplia las funciones y posibilidades de uso de los pinceles de Photoshop CS3.
Lo de instalar el CS4 querría suponer que te refieres a adquirir una licencia legal. En ese caso te aconsejo esperes a ver el anuncio e información que Adobe ofrecerá el próximo 12 de Abril sobre la nueva versión CS5.
>

HT203977 is there any way to restore factory settings on an Iphone 5s that will not connect to Itunes because the phone is locked with a pass code. Problem is that the screen is completely shattered.

is there any way to restore factory settings on an Iphone 5s that will not connect to Itunes because the phone is locked with a pass code. Problem is that the screen is completely shattered.

If the screen is completely shattered why bother to try and restore the phone?
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

Code highlighting?

Hi,
I am writing a simple IDE editor as an example for a plugin engine.
I want to add code highlighting, but I get an exception when I try to do this (I want to change the color and the style(to bold)).
Exception occurred during event dispatching:
javax.swing.text.StateInvariantError: Illegal cast to MutableAttributeSet.
I am doing this in the method keyReleased (from KeyListener).
Any one has a sollution for this?

I'm doing this without modifying the contentType, on a JTextPane :
          try
               SimpleAttributeSet attrib;
               attrib = new SimpleAttributeSet ();
               attrib.addAttribute(StyleConstants.Background, Color.BLUE);
               attrib.addAttribute(StyleConstants.Foreground, Color.YELLOW);
               if (annulation != null)
                    attrib.addAttribute(StyleConstants.Foreground, Color.RED);
               attrib.addAttribute(StyleConstants.Bold, new Boolean(true));
               document.remove(start, source.length());
               document.insertString(start, change, attrib);
          catch (BadLocationException e)
               e.printStackTrace();
          }.. Could you please poste the part of code where the error throw ?
JMS.

Problem with CS4 Master Collection Install

Have tried repeatedly to install CS4 Master Collection on an HP laptop running Microsoft Vista to no avail. I have uninstalled all previous attempts to install, run cleaner, deleted temp file stuff, rebooted ad nauseum etc. Originally, I was receiving a 1603 error code for all major programs: Photoshop, AI, etc. Now, I get a set up error: "set up has encountered an error and cannot continue. Contact Adobe Support." At this point, I have spent days trying to resolve this problem. Please help.

Since you mention Error 1603 you might try going thru the page linked below...
Error 1603: A fatal error occurred during installation

Error Code 148:3 - Photoshop CS4 for Windows

I have a message that comes up whenever I try to open Adobe Photoshop CS4 Extended.
"Licensing for this product has stopped working.
This product has encountered a problem which requires that you restart your computer before it can be launched
If you continue to see this message after restarting your computer, please contact either your IT administrator or Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error 148:3
http://www.adobe.com/support"
I restarted several times but I still get the error. How do I fix this?

wow...wssparky thanks a TON. I got the adobe error today and it was driving me INSANE. I *think* the problem had to do with my having to disable all my startup stuff in Windows7 to fix a problem I was having updating some other Microsoft software. Anyway MS said disable everything using the msconfig and it was after that when Adobe stopped functioning (my McAfee is having an issue as well) properly.
At any rate I got the adobe "fix" and it worked GREAT!
I was NOT having any luck to begin with by going to the support area at adobe.com (HEY ADOBE PEOPLE>> TAKE NOTE)
searching "support" for the error code tells me "Your search of Support for error 148:3 did not match any documents." which I find interesting
so I finally googled the error code and found this thread.
now a word to those who are less than kind in their posts and make people feel stupid for asking the question here...I would submit these forums are for us (the users) to help each other (read: be nice to each other) so we can USE the software we OWN.
I'm frankly disappointed that going to the Adobe "SUPPORT" was fruitless. MY problem was with the CS4 suite: I own the master collection which wasn't exactly cheap....it wold be nice if I, as a customer was able to at least FIND Adobe's OWN error code on their support section.
again... thanks to wssparky

Image problems in CS4

Building pages fine for months in cs4. Images appear fine in
preview and when uploaded. Today I can't get any image to preview
or appear on site once uploaded. All previous pages w/ image still
work fine. Have done all kind of experimenting to isolate the
problem with no luck.
Have recently started with cs4 after long absence since dw8.
So I'm rusty. But this issue is making me nuts. Any suggestions out
there on what simple thing I'm missing?
thanx

Are you asking us to guess what's up with your code or are
you planning to
provide a link.
"Artworthy1212" <[email protected]> wrote in
message
news:gkqooo$f3b$[email protected]..
> Building pages fine for months in cs4. Images appear
fine in preview and
> when
> uploaded. Today I can't get any image to preview or
appear on site once
> uploaded. All previous pages w/ image still work fine.
Have done all kind
> of
> experimenting to isolate the problem with no luck.
>
> Have recently started with cs4 after long absence since
dw8. So I'm rusty.
> But
> this issue is making me nuts. Any suggestions out there
on what simple
> thing
> I'm missing?
>
> thanx
>

Problems updating CS4 trial to full version

Hello. I've searched and searched for a solution to this, so appologies if this has been covered. I have about a half dozen new Macs here at work. They have a fresh install of OSX 10.6. I installed Design Standard CS4 on each of them, but because I didn't yet have all the serial codes for that many computers (my boss had them on order), I installed the trial version on each machine. A few days later I received the additional serial numbers I needed. I went to enter the serial numbers at the prompt when you open one of the CS4 programs, but it's giving me the red cross to indicate that it's an invalid serial.
I've triple checked that the version I installed on trial matches the boxes the serial numbers came with and they do. Am I going to have to reinstall CS4 on all these computers? One of the computers has already had QuickCut installed (without my knowledge) so i'm concerned the process to install Quick Cut will be undone if I reinstall CS4.
Thanks guys!

I would suggest to contact Adobe tech support directly with matter relating to serial numbers. They can verify from their end if the problem has something to do with the S/N or otherwise.
Cheers
Hisham

Flash Media Problem in CS4?

I've been using DW CS3 since it came out and have inserted
numerous flash video in web pages using the "Insert", "Media",
"Flash Video" menu commands. I mention this so that you will know I
have a basic understanding of how to do this and I have never had a
problem.
I've recently upgraded to DW CS4 and all of a sudden, I can
no longer get Flash Videos to work. I go through the same menu
command (except "Flash Video" has been replaced by "FLV..." Despite
the difference in menu command, it appears to be the same since the
same dialog box opens up for me to select flv file, skin and size.
However, once I complete the process and save it and view it either
in Live View OR in a browser, the video does NOT play. Instead of
the video playing I get a a blank white square the size of the
video. You can see a sample here:
http://www.fbchorizon.org/new_site/children.htm.
The other issue is that I've gone back to DW CS3 (I still
have both on my computer) to see if I could enter the new video on
the page there and now it won't work either. The only change I've
made to my computer since this has worked is that I've installed
CS4 Design Premium. Any help would be greatly appreciated.
See sample
here

Can you post a link to the page. With that, it's usually easy
to diagnose.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"miska2web" <[email protected]> wrote in
message
news:[email protected]...
>I have never had a problem inserting FLV files into my
pages until I
>upgraded
> to Dreamweaver CS4. I am on a PC. I am using the same
server I have always
> used. I cannot get my FLV files to show up in IE7. They
show in FireFox,
> Safari
> and Google Chrome just fine. If I tell it to 'auto play'
the audio plays,
> but
> no video or skin shows up in IE7. I have everything
uploaded correctly. I
> have
> been doing this on a lot of websites for the last 4
years. It doesn't make
> any
> sense. I have messed with the code and have not found a
way to get it
> working
> yet. This has to be some type of glitch in the CS4. The
code from my old
> inserted videos was different slightly from the new
code. The old video
> files
> are still playing online, however, if I replace the new
code that DWCS4
> creates
> with the old code from CS3, it still doesn't work. It's
odd that I am
> having a
> problem finding a solution...you would think more people
should be having
> this
> issue if they are inserting FLV files too. I have tried
accessing the
> video on
> different computers as well. It appears to be an issue
solely between IE7
> and
> DWCS4. If you look at the difference between my old and
new code, the new
> code
> doesn't have 'macromedia' codebase anymore as well as
'embed src'. I did
> not
> upload a 'Scripts' folder before either. That is new.
>
> Here is the code DWCS4 created:
> <object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="380"
> height="300" id="FLVPlayer">
> <param name="movie"
> value="FLVPlayer_Progressive.swf" />
> <param name="quality" value="high" />
> <param name="wmode" value="opaque" />
> <param name="scale" value="noscale" />
> <param name="salign" value="lt" />
> <param name="FlashVars"
>
value="&MM_ComponentVersion=1&skinName=Clear_Skin_1&streamName=bluec
> reek&autoPlay=false&autoRewind=false"
/>
> <param name="swfversion" value="8,0,0,0" />
> 
> <param name="expressinstall"
> value="Scripts/expressInstall.swf" />
> 
> 
> <object type="application/x-shockwave-flash"
> data="FLVPlayer_Progressive.swf" width="380"
height="300">
> 
> <param name="quality" value="high" />
> <param name="wmode" value="opaque" />
> <param name="scale" value="noscale" />
> <param name="salign" value="lt" />
> <param name="FlashVars"
>
value="&MM_ComponentVersion=1&skinName=Clear_Skin_1&streamName=bluec
> reek&autoPlay=false&autoRewind=false"
/>
> <param name="swfversion" value="8,0,0,0" />
> <param name="expressinstall"
> value="Scripts/expressInstall.swf" />
> 
> <div>
> <h4>Content on this page requires a newer
> version of
> Adobe Flash Player.</h4>
> <p><a
> href="
http://www.adobe.com/go/getflashplayer"><img
> src="
http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif"
> alt="Get Adobe Flash player" /></a></p>
> </div>
> 
> </object>
> 
> </object>
>
> Here is the code from an old video I did in CS3:
>
> <object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=7,0,0,0" width="342" height="291"
id="FLVPlayer">
> <param name="movie"
> value="FLVPlayer_Progressive.swf" />
> <param name="salign" value="lt" />
> <param name="quality" value="high" />
> <param name="scale" value="noscale" />
> <param name="FlashVars"
>
value="&MM_ComponentVersion=1&skinName=Halo_Skin_3&streamName=http://www.mediafi
>
lms.org/videos/copper/Cabinets/NGXC_F6_512K&autoPlay=false&autoRewind=false"
> />
> <embed src="FLVPlayer_Progressive.swf"
>
flashvars="&MM_ComponentVersion=1&skinName=Halo_Skin_3&streamName=http://www.med
>
iafilms.org/videos/copper/Cabinets/NGXC_F6_512K&autoPlay=false&autoRewind=false"
> quality="high" scale="noscale" width="342" height="291"
name="FLVPlayer"
> salign="LT" type="application/x-shockwave-flash"
> pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Versio
> n=ShockwaveFlash" />
> </object>
>
> Does anyone have this figured out yet?
>

Code highlighting problems in CS4

Similar Messages

Maybe you are looking for