Code stopped working once in sequence

We are controlling a LabSmith HV power supply in LabView using drivers from the manufacturer. We are trying to make injections by alternating between a floating and an applied voltage on channel D. In an earlier design we achieved this using a case structure and elapsed time VIs. However, our previous code was not serial and caused problems. We have transferred the code to a sequence to force serial commands, and in general this is working much better. We are having one problem though. We would like to have the option of manually injecting (by floating the voltage on Channel D) or having these injections occur with a regular period. Both methods worked in our earlier design (v07) using a case structure and elapsed time VIs. The same structure, however, is not working in our new version (v10). The single injection, when the upper case structure in the last frame is true, works great. However, when this is false, the program appears to execute the false case of the lower left case structure almost all the time, and only very briefly and regularly flips to the true command. We aren't sure why this code, which worked in our last version, does not work now, and we would be very grateful for feedback. Thank you!
Attachments:
Gated timed injections version 10.vi ‏150 KB
Gated timed injections version 07.vi ‏70 KB

Duplicate
http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/VISA-Hex-0xBFFF0015-Timeout-expired-before-op...

Similar Messages

Why does the hdmi sound out stop working once I start using eyetv?

I upgraded to Lion and now I have a few problems. I use the Elgato EyeTV to record television on my Mac Mini. I have been using it for a few years. Now once I watch something on my EyeTV the hdmi sound output stops working and I have to reboot to be able to hear audio from iTunes or anything other then EyeTV. Why is this happening and when will there be an update to fix it?

There were numerous audio issues with OSX 10.6.8 that
were carried over into Lion and not resolved. Issues
with EyeTV was just one of them. May want to check
the Snow Leopard forum for workarounds, if any for your case.

Skype 7.0 stops working once I send a PNG file

I am using Windows XP in my office. When I send a PNG picture file to a friend, the Skype 7.0 FREEZES immediately and also slows down my computer greatly. I read posts that suggest to upgrade the IE to 11.0. But I feel sorry to say, using Windows XP is our company's decision, not mine. Could you give another solution that can help Windows XP's users?
Please don't force me to use the new version when it still has bug(s)! I use Skype everyday at work. I cannot accept a Skype which force me to restart my computer everytime.
And by the way, the Skype 7.0 deleted the function of showing contact's local time. This function is quite necessary for international business. Why do you remove it??
Solved!
Go to Solution.

T-BlackWolf wrote:
Please forgive me if I disagree with your analysis. In my own case, at least, the "freeze" causes a never-ending resource check on my hard drive (the activity light is on solidly) that will not stop unless I use the Task Manager to end the program entirely. I have uninstalled and reinstalled three times, rebooted five times, cleaned the Registry, and confirmed that Skype 7.0.0.102 is fully functional until one attempts to send or receive a file of any kind. Returning to (click on) the conversation where the file is attempting to be transferred locks up the system again.
I am attempting to find a good installer for a previous version of Skype. I realize that I am offending the Gods of Technology by continuing to use an outdated OS, but I've no income for two years and have to limp along with what I've got. ^___^
Hi,
After some hours trying to solve the same exact problem you described I found a solution that certainly worked for me:
I just deleted the folder C:\Documents and Settings\<user_name>\Application Data\Skype\<skype_user_name>\media_messaging and restart Skype.
In my case, the problem appeared after sending a screenshot to a contact. Then, when opening the conversation window from that person the whole Skype stopped working. I didn't had problems by opening conversation windows from other contacts.
I hope this helps for other people

Login Hook stops working once I've changed the username

Hello. I need to change the usernames for a number of local accounts on a 10.5.8 mac. The accounts were set up by someone else who is no longer working at this education insitution and hasn't left any documentation. Currently when each user logs on, a script runs that does the following
#!/usr/bin/env bash
# iMac logon script
# get our user
theUser=$1
# get the users home directory
#theUsersHome=$HOME
# Copy the dock plist file for the user
cp /Library/Scripts/GHS/Docks/${theUser}/com.apple.dock.plist /Users/${theUser}/Library/Preferences
# Create a ScreenCaptures folder on the desktop, give it permissions and redirect the screen captures
# Unlock the Desktop folder first in case it is locked
sudo chflags nouchg /Users/${theUser}/Desktop
mkdir /Users/${theUser}/Desktop/ScreenCaptures
sudo chown ${theUser}:staff /Users/${theUser}/Desktop/ScreenCaptures
defaults write com.apple.screencapture location /Users/${theUser}/Desktop/ScreenCaptures
# Create a VideoWork folder on the Desktop and give it permissions
# Unlock the Desktop folder first in case it is locked
sudo chflags nouchg /Users/${theUser}/Desktop
# Remove the old Video Work folder in case it exists
rmdir /Users/${theUser}/Desktop/Video\ Work
mkdir /Users/${theUser}/Desktop/VideoWork
sudo chown ${theUser}:staff /Users/${theUser}/Desktop/VideoWork
# Lock the Desktop, Documents, Movies, Music and Pictures folders
sudo chflags uchg /Users/${theUser}/Desktop
sudo chflags uchg /Users/${theUser}/Documents
sudo chflags uchg /Users/${theUser}/Movies
sudo chflags uchg /Users/${theUser}/Music
sudo chflags uchg /Users/${theUser}/Pictures
However, once I change the users account name, the script doesn't seem to run correctly as the screen captures fail due to not having write permission in the intended destination.
I rename the UserName the ShortName, the HomeDirectory and the folder here /Library/Scripts/GHS/Docks/UserName
The idea is, once I've updated this one mac with all the new accounts, I will then duplicate the image across all the others that we have
I'm very new to this and I'm not sure how much of this works
Thank you very much for any help and I apologise if I've missed out any essential information.

Hi John, not certain I can help here, but...
Add a user from the OS X command line, works with Leopard!
http://osxdaily.com/2007/10/29/how-to-add-a-user-from-the-os-x-command-line-work s-with-leopard/
More...
http://osxdaily.com/2011/05/20/change-short-name-user-mac-os-x/
http://www.macworld.com/article/132693/2008/03/changeshortusername.html

Fox tab stopped working once adobe flash player 11 was installed on my mac OS X 10.6.8 it is just a black screen. If I uninstall, fox tab shows up and says I need to down load adobe again

When I double click on the tool bar on the bottom of the black screen on fox tab, adobe settings shows up. I delete adobe then the black screen shows the fox tab again and says to view it I need to down load the latest version of adobe flash player.

Tylerdowner, as a moderator, one would think that, prior to adjusting comments/solutions, especially when not having a Mac, you would do more research (bet you know someone with a Mac, to duplicate problem), or pass responding on to a moderator who does have a Mac (I am amazed that you are even a moderator on Mac problems/situations, if you only have access to a PC). Had the solutions above worked, I would not have needed to figure out another solution (we all know the newest release of anything is the most secure). Finally I am open to any fixes (tested) that you can provide, that improve upon mine. As a moderator, maybe you have pull with the Foxtab and/or Adobe people to get them to work out compatibility, and lastly, maybe add a warning at the Foxtab add-ons page, after verifying the problem yourself, with an associate's/friend's Mac.

My toshiba fingerprint utility stopped working once I loaded the new firefox version 4

I have a toshiba satellite pro laptop. it comes with a utility to use your fingerprint to enter password protected sites. when I go to a preregistered site a green bar used to show below the menu bar prompting me to scan my fingrprint to enter the site. this green bar no longer shows up and sanning my fingerprint doesn't work. the fingerprint utiltiy does work when I first sign in to my computer so I think it is a problem with version 4. any ideas?

See if this extension works for you. <br />
Fingerfox (SE) <br />
https://addons.mozilla.org/firefox/3871/
Or maybe this version from the author's website. <br />
http://amews.net/products/fingerfox/
If neither of those work, check with Toshiba for an update.

Help VBA Code Suddenly Stops Working!

I have a simple line of code that worked flawlessly for quite some time. Out of the blue, with no changes to my system or the database, the code stops working. See below.
Private Sub Proposal_Number_Click()
DoCmd.OpenForm "frmPROPOSALINFORMATIONInputForm", , , "[ProposalNumber] = '" & Me.[ProposalNumber] & "'"
End Sub

Hello,
Maybey you're having a DLL problem (see recent exd-issues
https://social.msdn.microsoft.com/Forums/office/en-US/b8f0af82-0bb8-4799-aa62-1dbcbc5b7742/excel-2010-macros-does-not-work-after-updates-9dec2014?forum=excel).
Or check your references for a missing reference?
Hope it helps,
Wouter

Java Script Code not working properly for visios in sharepoint 2013

Hi all ,
I have few visios and I am using the visio web part to display and to redirect from one visio to other visio I am using the java script code through content editor web part .
In share point 2010 it's working fine , I was able to redirect to all the visios and code is working fine .
In share point 2013 its not the same , Its not working properly . only for the first time the code is working fine . once it goes to next visio the code stops working .
For example if i click in visio A it gets redirect to Visio B and its stops working , it wont allow to do any other steps .
I have checked with the URL its correct , I am not able to find any error also .
Indresh

This will be likely caused by the Minimal Download Strategy not registering the Javascript on the page reload. You can turn off the MDS feature to test this.
You can either turn off MDS in your site, or register your Javascript functions with MDS to ensure they are called. To do this, you'll need all of your code to be wrapped in a javascript file (Embed this on the page using a <script> tag and
inside that file in a function, which you then register with MDS as follows (I usually do this in the first line of the javascript file):-
RegisterModuleInit("/SiteAssets/YourJavaScriptFile.js", NameOfYourFunction);
Regards
Paul.
Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

IPod Touch stopped working with iTunes with OS upgrade

I have a problem with my iPod Touch connecting to iTunes. It is a new
It has worked fine in the past, but stopped working once I upgraded from OS 10.4.x to OS 10.5.. I can still see/ sync my old 3rd generation iPod just fine.
I am currently using iTunes 8.0.1. The iPod is charging fine with the cord provided. The iPod works fine, but I would like to load the Apps I purchased and update the podcasts I listen to.
Any suggestions will be appreciated.

I apologize for posting a bit early. Found an Alpine manual online and i needed to set the AUX port to off. They also recommended a reset of the Touch. After doing these two things it is now working. Maybe this will help someone else.

When syncing, stops working?

I just added a certain file to a library, and I even tried to delete it. It just says it stops working once it starts to sync. There's no more information I think I need to give, because it gives me no information like a certain error.
Thank you for the help!

yes shirley i did, it turned out that one of my photos was a snapshot of what was on my iphone at the time and it had been named xxxxx.png, i think the fact it was .png was the reason, anyway i deleted it from phone and computer and i,ve had no problem since.

Lift and Extract have stopped working in Premiere Pro CS6.0.1

Lift and extract have stopped working in a sequence in Premiere Pro 6.0.1. If a create a new sequence it works ok. It seems the sequence has got locked up it some way. Does anyone have any ideas.

Thanks this worked but I found how to make it fail. I created a sequence with 3 stereo tracks and a 5.1 master. I then added a 5.1 audio track and deleted the stereo tracks. From then on the lift and extract fails.
I couldn't find a way to submit a bug to adobe. Please can someone tell mehow to do this.

Messages beta worked well and suddenly stop working

I installed Messages beta on my macbook pro and worked well but one day stop working and when i try to send an imessage appears "It has not been possible to send the message." Its has been like this for two weeks now. However, yesterday i went to a friend`s house and connected my macbook on his wfi`s connection and i was able to send messages again but when i came home messages stop working once more. Can you help me to solve this problem?????

Hi,
These ports are used by FaceTime and iMessages
Ports
FaceTime
iMessage
80 (TCP)
√
√
443 (TCP)
√
√
3478 through 3497 (UDP)
√
5223 (TCP)
√
√
16384 through 16387 (UDP)
√
16393 through 16402 (UDP)
√
iChat uses Ports:-
iChat 4 and 5 Ports for iChat
Service
TCP Ports
UDP Ports
iChat over AIM
5190
5190
Bonjour
5298
5297, 5298, 5353
Jabber
5220, 5222, 5223
No ports
A/V Ports
No ports
5678, 16393-16402
iChat 6 and Messages beta move from using port 5190 to Login to port 443 (TCP)
Messages Beta will use the iMessages and iChat ports
More than likely it is about how you set up the ports to be open in the router for your computer.
If it was using Port Forwarding they may have been pointed to on IP that the computer does not have now.
9:26 PM Tuesday; April 10, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Blue screen, Windows stopped working, BC code 50

I did a clean install of Windows 7 Home Premium 32 bit, on my vista laptop.
I have had two blue screens in the past week, stating windows stopped working here are the details:
BC code - 50
BCp1 - 80024114
BCP2 - 0000000
BCP3 - 9850ED3A
BcP4 - 0000000
OS Version 6_1_71
Service pack 1_0
Product 768_1
Can you help me with where the source of the problem is?

We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
We prefer at least 2 DMP files to spot trends and confirm the cause.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
Wanikiya and Dyami--Team Zigzag

Teststand Sequence Editor has stopped working

I get the following message and error code when running my sequence file. This sequence files works ok on another machine. It is a display message to the screen for user input. Software version is 4.2.1
Teststand Sequence Editor has stopped working.
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: seqedit.exe
Problem Signature 02: 4.2.1.83
Problem Signature 03: 4af027d1
Problem Signature 04: PresentationFramework
Problem Signature 05: 3.0.0.0
Problem Signature 06: 4f350630
Problem Signature 07: 6263
Problem Signature 08: e1
Problem Signature 09: System.Windows.Markup.XamlParse
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1033

Kingme wrote:
I get the following message and error code when running my sequence file. This sequence files works ok on another machine. It is a display message to the screen for user input. Software version is 4.2.1
Teststand Sequence Editor has stopped working.
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: seqedit.exe
Problem Signature 02: 4.2.1.83
Problem Signature 03: 4af027d1
Problem Signature 04: PresentationFramework
Problem Signature 05: 3.0.0.0
Problem Signature 06: 4f350630
Problem Signature 07: 6263
Problem Signature 08: e1
Problem Signature 09: System.Windows.Markup.XamlParse
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1033
Do your code modules use System.Windows.Markup.XamlParse? Is the process close to running out of memory (i.e. over 1GB of memory used)? Do you have any DLLImprorts (if C#) or any native code (i.e. C/C++) being called by your sequences? Does the error happen every time you run? Always on the same step? If so, what is that step doing? Have you tried to debug the process?
-Doug

Premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?

I can open a project, import files or other projects, but when I want to play the sequence the program stops working and closes. When I try to save the project or close the program I get a "software not responding" message.
I hope someone can help me with this as I cannot work on any projects.
thanks.

Hi john,
thanks for taking the time to help me. I have updated the software and rendered the files and now I am able to play them, but still neither the sequence nor the clip play/show on the corresponding screens, I can only hear the audio file. I also continue having problems when saving the project, the software stops working and I get the "non responding" error from microsoft.
As you suggested, and I have to say I am pretty much a dummy with the codecs and alike, I installed the mediainfo and run one of the files.
This is the info that appears on the screen
I am not getting any error messages from Premiere, so I am kind of stock. If you need other info let me know.
Thanks for your help and patience.
Arantza
Date: Mon, 23 Apr 2012 09:12:15 -0600
From: [email protected]
To: [email protected]
Subject: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
    Re: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
    created by John T Smith in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037What is a CODEC... a Primer http://forums.adobe.com/thread/546811What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037.Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing.For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/enFor Mac http://mediainspector.massanti.com/.http://blogs.adobe.com/premiereprotraining/2011/02/red -yellow-and-gree n-render-bars.html.If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs.Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project.H.264 will NOT work inside an AVI http://forums.adobe.com/thread/854115.More information needed for someone to help... click these links and provided the requested information-http://forums.adobe.com/message/4200840-http://forums.adobe.com/thread/416679.For CS5 and later, the easy way to insure that your video and your project matchSee 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4354727#4354727
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4354727#4354727. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Code stopped working once in sequence

Similar Messages

Maybe you are looking for