COGS BU not refresh base on BU in AR Invoice row

Hi!
When i choose one item and filled in BU in Ar invoice by row at the same time COGS BU also refresh and get value Of BU. After, i would like to change BU again but COGS BU not catch the value of BU like the first time. and then i create a query to get BU and put in COGS BU as FMS and also set auto refresh base on BU but it still not auto refresh. Any way to make COGS BU get value of BU whenever it's changed?
thx u for help in advance.
Best regards,
Dara

Hi,
Reassigning FMS in same window again and again will not give desired result.
1. Open new AR invoice window
2. Select card code and item code. Assign saved FMS query in that field.
3. Close AR window.
4. Open new AR invoice window, now you can see user defined value symbol.
5. Select required BU value and use tab to refresh, then it will be updated.
Thanks & Regards,
Nagarajan

Similar Messages

Why do the icons on the Yahoo toolbar keep disappearing? The cog does not refresh.

This happens continually. I posted this question about a week ago and it miraculously corrected itself. Now it has happened again.

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
See also extensions like these:
*CheckPlaces: https://addons.mozilla.org/firefox/addon/10897
*Delete Bookmark Icons: http://www.sephiroth-j.de/1/mozilla/#delsiteicons

Tables in popups not refreshing

I'm having difficulty with some table refreshes within a popup. Here's my scenario. I have a window that displays a table. The user clicks edit, and the table is shown in an “edit” popup. At this point, if the user makes changes, clicks ok, then the table on the beginning page is refreshed correctly. To do this, I am using the following method to refresh the page fragement, AdfFacesContext.getCurrentInstance().addPartialTarget(this.getViewTablex());
Here is the issue,
The user chooses to edit the main table, and the edit popup appears. So far so good. The user then wants to add a new record, they click “Add” within the edit popup so I then show a new popup form where the user enters the fields for the new row. When they click ok on the "add" popup form, then the edit popup (from which they called the add popup) does not refresh the table with the newly added row. The row they added then appears as the first row in the edit popup.
What further complicates this is that I have to validate the "edit" popup rows when they click ok, to make sure all the data is valid, so I can not do a commit on the underlying table until after the validation. But, I need the newly added row in the table (or view) in the edit popup as part of my validation.
So, I have a table that makes use of an edit table popup that in turn makes use of an add form popup. But I cannot commit until I validate the edit popup. The problem is I’m not getting the newly added row that was created in the “add” popup to show up in my edit popup.
Here is the add popup handler I’m using
public void onAddxxxPopupFetchAction(PopupFetchEvent pPopupFetchEvent) {
try {
OperationBinding lOperationBinding =
lBindings.getOperationBinding("CreateInsert");
//If the Insert failed, return a "Severe" message.
Object result = lOperationBinding.execute();
if (!lOperationBinding.getErrors().isEmpty()) {
return;
} catch (Exception e) {
public void addxxxDialogOKAction(DialogEvent pDialogEvent) {
try {
//refresh the page fragment.
AdfFacesContext.getCurrentInstance().addPartialTarget(this.getEditPopupTable());
} catch (Exception e) {
And here is the popup portions of the page fragment
<af:popup id="addPopup" contentDelivery="lazyUncached"
popupFetchListener="#{backingBeanScope.backing_ui_pages_Maintenance. onAddxxxPopupFetchAction }"
popupCanceledListener="#{backingBeanScope.backing_ui_pages_Maintenance.onAddxxxPopupCancelAction}">
<af:dialog id="addDialog"
dialogListener="#{backingBeanScope.backing_ui_pages_Maintenance. addxxxDialogOKAction }"
closeIconVisible="false">
and for the edit popup;
<af:popup binding="#{backingBeanScope.backing_ui_pages_Maintenance.editPopup}"
id="editPopup">
<af:dialog binding="#{backingBeanScope.backing_ui_pages_Maintenance.editDialog}"
id="editDialog" closeIconVisible="false"
dialogListener="#{backingBeanScope.backing_ui_pages_Maintenance.editxxxDialogOKAction}">
I am using JDeveloper 11.1.1.6.0.
Any help would be appreciated.
thanks!
Doug

Seems like a PPR issue. Try have a partialTrigger corresponding to the OK button of add popup on the table in the edit popup.
Thanks,
TK

Podcasts app not refreshing new content?

Hi, my podcasts app is not refreshing new content for last 4 days, is anyone else facing the same issue?

Hello there, ikgandhi.
The following Knowledge Base article offers up some great steps to review for issues with the Podcasts app for iOS:
Podcasts app for iOS: Managing subscriptions
http://support.apple.com/kb/HT6190
Default settings: From your Home screen, tap Settings and then Podcasts. These settings are shared by all of your podcast subscriptions. These are known as default podcast settings.
Refresh Every: You can choose how often your iOS device checks for new episodes to your subscriptions. It's set to check every six hours by default.
Limit Episodes: You can pick how many episodes you see for subscriptions.
Download Episodes: The latest episodes of your podcasts will download automatically if your iOS device is connected to Wi-Fi.
Delete Played Episodes: If this is turned on, episodes will delete 24 hours after you finish playing them.
Use Cellular Data: If your iOS device has a cellular connection, you can allow downloads to use cellular data when Wi-Fi isn't available. This is off by default. Downloads using cellular data are limited to 100MB per episode. If an episode is larger than that, it won't start downloading until you're connected to Wi-Fi.
Podcast-specific settings: The second place you'll find subscription settings is within the Podcasts app. Tap a podcast subscription under My Podcasts and pull down with one finger to reveal the settings buttons. These settings are unique to each subscription. If you don't change anything here, the podcast subscription will just use the default settings. If you do make changes to a specific subscription’s settings, they'll only apply to that podcast.
Play: This setting lets you change the order in which a subscription plays. If you're listening to a news style podcast, you may want to set this to play the new episodes first. If the series is more episodic, you may prefer to play oldest to newest.
Sort Order: This changes the sort order of episodes that appear for a podcast (not its playback order).
Subscribed: When this is on, new episodes of this podcast will be marked as unplayed as they become available.
Refresh Every: You can choose how often your iOS device checks for new episodes to your subscriptions. It's set to check every six hours by default.
Limit Episodes: You can pick how many episodes you see for subscriptions.
Download Episodes: The latest episodes of your podcasts will download automatically.
Delete Played Episodes: If this is on, episodes will be deleted 24 hours after you finish playing them unless you've marked them as Saved.
Inactive subscriptions
If you do not play or access a subscription within 15 days, your subscription to that podcast will go inactive and you will no longer receive updates to it. As soon as you access the subscription again it will refresh.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Facebook application is not refreshing neews feed on Playbook 64GB

Hi!
I have just got a Playbook 64GB with the latest OS on it (it downloaded after full wipe). It comes with native facebook client.
However, after signing I browsed it for 1 day approx, and then I started realizing it is not refreshing the neews feed at all. I tried to log out, and delete the app and then reainstalll from appworld, but the issue comes back again. It only keeps showing me 1 feed from one of my contacts and thats it. I pull down to refresh butbut nothing happens.
Anyone got an idea how to fix this?
Cheers,
Breaker

if you sell it, then you won't have this issue anymore
but the picture issue is on facebook side (they did not renew all their security certificates, and they now are considered insecure by your BlackBerry tablet, the solution is to configure Facebook to not force usage of those deprecated certificates).
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Can not refresh server manager Error:0x8007045b

OS: Windows 2012 R2 Core
Services: Hyper V
I was trying to remote reboot and the session hung. No worries I decided I could just reboot the next morning. So I rebooted the next day but when I go into server manager I get
an errror can not refresh server manager Error:0x8007045b. Did some research found suggestions to fix it using a DISM.exe /Online /Cleanup-image /Restorehealth.
But then I get an error 1115 A system Shutdown is in progress. I attempt to fix this issue using pskill winlogon but the issue pursistest. I have restarted the server several times now. Not sure how to fix this.
Thanks in advance,
Jake

Hi,
In addition to the above information,
Checkout the below thread for similar discussion,
http://social.technet.microsoft.com/forums/windowsserver/en-US/a700e9f6-4491-4c70-8bd0-d9d3111e2f70/windows-reboot-error
Regards,
Gopi
JiJi
Technologies

Can not refresh page after save properly(When not saving master record)

I am using jdeveloper 11g R2 (11.1.2.3) JSF Facelet
In some use case I have Address as master table and Person as detail table
For some business reason I need to don't save same addresses
eg:
If +1 Test St+ is in database already and new user coming and adding this address with new person
I need to use the row in database not creating a new address
I do saving in doDML method of Address with some hashing algorithm and it is fine
My problem is that I can not refresh page after save properly
User coming to page think Adding a new address and a new person but in fact no new
address added because of business I describe above
Any ideas how I can implement this?
Appreciate that
Regards
Mohsen

Hi,
from your description it is not clear why the page doesn't refresh. It could be a problem in your implementation code - who knows. What if you perform the address check on a command button that actually submits the new address? If the check returns true (address exists) you would call row.refresh(forget new row); and re-query the view object so the address coming from the database is displayed. If you wanted to use the doDML then yuou need to be aware that doDML doesn't help removing the row the user created. It just ignores the database update but the entity is still around, which in my suggested solution wont be the case.
Frank

Can not refresh the metrics in schedular

Post Author: sachinddalal
CA Forum: Performance Management and Dashboards
Hi,
When I refresh the metric using schedular, the metric is not refreshed , nor schedular return any error. But when checked in metrics proparties, the last refresh date is not changed, niether the values are updated.
Whe I try to refresh the metric manual, the values are refresh.
Please help me to troubleshoot the problem of refreshing metric through schedular.
Thanks,
Regards
Sachin Dalal

Post Author: jezbraker
CA Forum: Performance Management and Dashboards
Scheduler is pretty horrid for refreshing metrics.Better of to use the Rules engine and create a rule thats based on a schedule that based on condition (1=1 works well ) then refreshes metircs.troubleshooting is best done with the trace options in setup/parameters.there are a few other ways or seeing what the schedulers up to - but id stick to rules if i were you.

Clicking a tree node does not refresh the fields in the table component

hi all,
I am using a tree component along with a table component in my page.so whenever i am clicking on a node it should display the relevant information of that node in the table from the database.But whenever i am doing the page is not refreshing and the old values of the textfields in the table still exist.i have written the code to populate the table in a button click event.It is working fine but the same is not working when i am clicking any node in the tree component.Can anyone provide a solution to this problem.
Thanks and regards,
Prasant Kumar

Never mind... I actually found something that works...
treeModel.nodeStructureChanged(leadSelection);

Report Portlets do not refresh data.

How can I refresh a report portlet?
I have created a report and a forms provider based on the same table. I put the portlets on separate TABS on the same PAGE. The report works fine, but when I update the information on the form and return to the report it does not reflect the changes. I have pressed 'refresh', I have gone to another page and come back, no luck. The only way to see the changes is to log out and back in again. Any ideas?
Thanks, Deb

I had caching turned off. When I turned on both content and page definition, I was unable to query my forms. The forms and reports are on the same page, different tabs. When I select cache page definition only, I get the same results as no caching. The forms will query my data, I can update, but when I return to the reports TAB, the data has not changed. (Yes, I did click refresh.) I have found that if I click the 'Customize' link on the portlet containing the report and then click 'OK' the data will update. This, however gives me a new error that I will worry about later. For now, the users have 'Minimize' but do not have the 'Customize' Link and the 'minimize' link does not refresh the data, nor give me the new error.

Workbook not refresh after running Planning Function (BI-IP)

Hi! Folks,
I have a problem with the Bex Analyser which not refresh the data after running Planning Function.
Step 1: Run Planning Function (There are some changes in records)
Step 2: I have to Run Process Variables again and input the same selection in the pop-up variables
Step 3: The changed records will be shown...
Can I have some coding in the Layouts of Bex Analyzer to refresh the data after running Planning Function?
Brgds,
Supasake

Hi,
I had a similar problem that the resuls of my planning function were not automatically shown. Only if I did "something else" like saving or running another function the results were displayed.
I think I solved it by upgrading my SAP GUI6.4 with patch 14. the results of planning functions should be automatically displayed.
D

When I resume my laptop from sleep/hiberante, firefox is hung. It will prompt me with a dialog when I quit, so it is still running, but the page display is blank and will not refresh. I noticed this since about beta 7

Firefox is running when my laptop comes out of system standby, but the page that was displaying when the laptop went into sleep mode is now a white canvas that does not refresh.
The application is not hung, because I get prompted to save tabs when I quit, but for some reason, I can't prompt Firefox into refreshing the screen.
I'm running Firefox on a Thinkpad T400 which has Intel 4 series Express integrated Graphics.

This also happened if the network adapter is disabled then enabled. My computer is Windows 7 x64. Firefox needs to be killed from taskman before it will load a new instance of the application. I can also reproduce with all add-ons disabled.

Master-Detail Detail does not refresh after it's been empty

I have a master detail page (both are tables) that works just fine, until I click a master record that has no details.
After that the panelHeader of teh detail is refreshed with the PPT but the table underneath it is not, I keep seeing "no rows yet", no matter which master record I click.
When I go to a different page and return it's fine again.
Only one of my pages has this behavior, I tested this on another and it was fine. Has anyone seen this behavior before?
My console has this message:
May 11, 2007 10:52:38 AM oracle.adfinternal.view.faces.model.binding.FacesCtrlRangeBinding$FacesModel getSelectedRow
WARNING: rowIterator is null
Message was edited by:
Wendy Tromp

Ok I found it,
My details iterator had the following properties:
<iterator id="AfdelingMedewerkersIterator" RangeSize="-1"
Binds="AfdelingMedewerkers"
DataControl="PRBAppModuleDataControl"
Refresh="IfNeeded" RefreshCondition="#{!adfFacesContext.postback}" />
I have no idea why I set it like that, but removing the Refresh properties fixed my problem.
I am still clueless as of why this led to the behavior as described above. I could have understood it if my iterator was not refreshed at all, but I have no idea why it stopped working only after the details were empty and not a second before...
Anyway, problem solved!

Not Refresh Value After Add New Record used with RPC Component

This is my code in the class Users.as
package inthanous
import mx.controls.Alert;
import mx.rpc.http.HTTPService;
import mx.rpc.events.ResultEvent;
import mx.rpc.events.FaultEvent;
public class Users
private var service:HTTPService;
[Bindable]
public var xmllist_user:XMLList;
public function Users(){
service = new HTTPService();
service.method = "POST";
service.useProxy = false
service.resultFormat = "e4x";
public function listUser():void{
service.url = "/user/get_all_user_group_name";
service.addEventListener("result", httpResultListUser);
service.addEventListener("fault", httpFaultListUser);
xmllist_user = new XMLList();
service.send();
private function httpResultListUser(event:ResultEvent):void{
service.removeEventListener("result", httpResultListUser);
service.removeEventListener("fault", httpFaultListUser);
xmllist_user = new XMLList(service.lastResult.children());
listAllUser();
private function httpFaultListUser(event:FaultEvent):void{
var faulstring:String = event.fault.message;
service.removeEventListener("result", httpResultListUser);
service.removeEventListener("fault", httpFaultListUser);
Alert.show(faulstring,"Error");
public function createUser(_xml:XML):void{
service.url = "/user/create_user";
service.addEventListener("result", httpResultCreateUser);
service.addEventListener("fault", httpFaultCreateUser);
service.send({firstName: _xml.firstName,
lastName: _xml.lastName,
gender: _xml.gender,
login: _xml.login,
pwd: _xml.pwd,
dtBirth: _xml.dtBirth,
telephone: _xml.telephone,
idGroup: _xml.idGroup
private function
httpResultCreateUser(event:ResultEvent):void{
service.removeEventListener("result", httpResultCreateUser);
service.removeEventListener("fault", httpFaultCreateUser);
listUser();
clearUserDetail();
private function httpFaultCreateUser(event:FaultEvent):void{
var faulstring:String = event.fault.message;
service.removeEventListener("result", httpResultCreateUser);
service.removeEventListener("fault", httpFaultCreateUser);
Alert.show(faulstring,"Error");
This code i used with Ruby on Rail to connect with MySQL.
When i used with FireFox browse after i create new user
success it refresh the new record in Datagrid. But for the Internet
Explorer Datagrid not refresh it because of it display the old
recode before create.
So i don't know it problem by Internet Explorer or my script.
i hope someone can help me the solve this problem.
thanks

If you restrict the selection, a record value outside of that selection is not acceptable and will give you this error. This is how BPS works.
You need to restrict on some other char so BASIC1 doesn't come in, but this value should be part of any selection on ZSEGMENT field for it to be accepted back.

Why??? Simple snapshot can not refresh automatically, but can refresh manually.

Server 1 : Oracle 7.3.4 (as a Master site)
Server 2 : Oracle 7.3.4 (as a Snopshot site)
Client PC: SQL*Plus (Oracle 7.3.4 Client)
Step 1: on Client PC, start 2 SQL*Plus dialog Windows,
one(Window A) for <Server 1> , another(Window B) for <Server 2>;
Step 2: on <Window A> do:
SQL>connect scott/tiger@Server1
SQL>CREATE SNAPSHOT LOG ON scott.dept ;
SQL>select * from dept;
DEPTNO DNAME LOC
10 AAAAAA AAAAA
20 BBBBBB AAAAA
30 CCCCCC AAAAA
Step 3: on <Window B> do:
SQL>connect scott/tiger@Server2
SQL>CREATE DATABASE LINK oracle USING 'Server1';
SQL>CREATE SNAPSHOT all_dept REFRESH fast
start with sysdate NEXT SYSDATE+1/(24*60)
AS SELECT * FROM scott.dept@oracle;
-- refresh interval: 1 minute
SQL>select * from all_dept;
DEPTNO DNAME LOC
10 AAAAAA AAAAA
20 BBBBBB AAAAA
30 CCCCCC AAAAA
Step 4: on <Window A> do:
SQL>insert into dept values (50,'MMMMMM','NNNNN');
SQL>commit;
SQL>select * from dept;
DEPTNO DNAME LOC
10 AAAAAA AAAAA
20 BBBBBB AAAAA
30 CCCCCC AAAAA
50 MMMMMM NNNNN
<one or two minutes later ... ... >
Step 5: on <Window B> do:
SQL>select * from all_dept;
DEPTNO DNAME LOC
10 AAAAAA AAAAA
20 BBBBBB AAAAA
30 CCCCCC AAAAA
conclusion: Simple snapshot can not refresh automatically ???????
SQL>exec DBMS_SNAPSHOT.REFRESH( list => 'all_dept',method => 'F');
SQL>select * from all_dept;
DEPTNO DNAME LOC
10 AAAAAA AAAAA
20 BBBBBB AAAAA
30 CCCCCC AAAAA
50 MMMMMM NNNNN
conclusion:Simple snapshot can refresh manually.
How to solve this problem?????
Thank you very much
Zhang Ming-an

When you are manually refreshing the snapshot as scott/tiger, and your database link was defined with a 'connect to/identified by ' clause, your login credentials will be scott/tiger. When the refresh happens from the job queue, it does not use those credentials, It uses some default set. What you should probably do is:
1. create public database link Oracle using 'server1';
2. as scott/tiger, create database link Oracle connect to scott identified by tiger;
3. your automatic refresh should work now.

COGS BU not refresh base on BU in AR Invoice row

Similar Messages

Maybe you are looking for