Publishing from two different machines to same DOT MAC - WATCH OUT!

As of this week - not sure if it's iWeb 08 or changes on the DOT MAC back end, but here's what I can reproduce:
I have two machines set up with iWeb: a MBPro and an iMac.
The MBPro has iWeb set to publish about 6-8 sites to my dot mac account - I often use it for scratch sites or temp sites.
The iMac has iWeb set to publish 3 additional (different) sites to my dot mac account. One of these sites is part of a business site - and is rather critical.
As of this week, when publishing from the MBPro, it wipes out the dot mac installation of the first of three sites published from the iMac (the first site listed in the site list column in iWeb on the iMac).
If I publish from the iMac, it wipes out the dot mac installation of the first of eight sites published from the MBPro (the first site listed in the site list column in iWeb on the MBPro).

I just found this overwriting problem when my daughter updated her site to our shared .Mac account. I have developed this workaround that is not too painful. Only one computer can post directly to the .Mac account. The other computers will have to mount the iDisk and use iWeb's "Publish to a Folder..." option to save the site on the iDisk. Before you can save the site, you have to create a new folder for it. Go to your iDisk, then to the /Web/Sites/ folder. There create a new folder that is appropriate to the name of the site you will be publishing. Now publish to that new folder from iWeb. After that you should be able to get to the new site by going to http://web.mac.com/YOURDOT_MAC_NAME/NEW_FOLDERNAME/
Hope that works for you, AskJacob.

Similar Messages

Possible solution to avoid deadlock when two inserts happen on same table from two different machines.

Possible solution to avoid deadlock when two inserts happen on same table from two different machines.
Below are the details from deadlock trace.
Deadlock encountered .... Printing deadlock information
Wait-for graph
NULL
Node:1
KEY: 8:72057594811318272 (ffffffffffff) CleanCnt:3 Mode:RangeS-S Flags: 0x1
Grant List 2:
Owner:0x00000013F494A980 Mode: RangeS-S Flg:0x40 Ref:0 Life:02000000 SPID:376 ECID:0 XactLockInfo: 0x000000055014F400
SPID: 376 ECID: 0 Statement Type: INSERT Line #: 70
Input Buf: RPC Event: Proc [Database Id = 8 Object Id = 89923542]
Requested by:
ResType:LockOwner Stype:'OR'Xdes:0x0000002AA53383B0 Mode: RangeI-N SPID:238 BatchID:0 ECID:0 TaskProxy:(0x00000027669B4538) Value:0x10d8d500 Cost:(0/38828)
NULL
Node:2
KEY: 8:72057594811318272 (ffffffffffff) CleanCnt:3 Mode:RangeS-S Flags: 0x1
Grant List 2:
Owner:0x0000000B3486A780 Mode: RangeS-S Flg:0x40 Ref:0 Life:02000000 SPID:238 ECID:0 XactLockInfo: 0x0000002AA53383F0
SPID: 238 ECID: 0 Statement Type: INSERT Line #: 70
Input Buf: RPC Event: Proc [Database Id = 8 Object Id = 89923542]
Requested by:
ResType:LockOwner Stype:'OR'Xdes:0x000000055014F3C0 Mode: RangeI-N SPID:376 BatchID:0 ECID:0 TaskProxy:(0x000000080426E538) Value:0x30614e80 Cost:(0/41748)
NULL
Victim Resource Owner:
ResType:LockOwner Stype:'OR'Xdes:0x0000002AA53383B0 Mode: RangeI-N SPID:238 BatchID:0 ECID:0 TaskProxy:(0x00000027669B4538) Value:0x10d8d500 Cost:(0/38828)
deadlock-list
deadlock victim=process5daddc8
process-list
process id=process5daddc8 taskpriority=0 logused=38828 waitresource=KEY: 8:72057594811318272 (ffffffffffff) waittime=2444 ownerId=2994026815 transactionname=user_transaction lasttranstarted=2014-07-25T12:46:57.347 XDES=0x2aa53383b0 lockMode=RangeI-N schedulerid=43 kpid=14156 status=suspended spid=238 sbid=0 ecid=0 priority=0 trancount=2 lastbatchstarted=2014-07-25T12:46:57.463 lastbatchcompleted=2014-07-25T12:46:57.463 clientapp=pa hostname=pa02 hostpid=1596 loginname=myuser isolationlevel=serializable (4) xactid=2994026815 currentdb=8 lockTimeout=4294967295 clientoption1=671088672 clientoption2=128056
executionStack
frame procname=mydb.dbo.SaveBill line=70 stmtstart=6148 stmtend=8060 sqlhandle=0x03000800d61f5c056bd3860170a300000100000000000000
INSERT INTO [dbo].[Prod1] .....
inputbuf
Proc [Database Id = 8 Object Id = 89923542]
process id=process5d84988 taskpriority=0 logused=41748 waitresource=KEY: 8:72057594811318272 (ffffffffffff) waittime=2444 ownerId=2994024748 transactionname=user_transaction lasttranstarted=2014-07-25T12:46:57.320 XDES=0x55014f3c0 lockMode=RangeI-N schedulerid=39 kpid=14292 status=suspended spid=376 sbid=0 ecid=0 priority=0 trancount=2 lastbatchstarted=2014-07-25T12:46:57.440 lastbatchcompleted=2014-07-25T12:46:57.440 clientapp=pa hostname=pa01 hostpid=1548 loginname=myuser isolationlevel=serializable (4) xactid=2994024748 currentdb=8 lockTimeout=4294967295 clientoption1=671088672 clientoption2=128056
executionStack
frame procname=pa.dbo.SaveBill line=70 stmtstart=6148 stmtend=8060 sqlhandle=0x03000800d61f5c056bd3860170a300000100000000000000
INSERT INTO [dbo].[Prod1]....
inputbuf
Proc [Database Id = 8 Object Id = 89923542]
resource-list
keylock hobtid=72057594811318272 dbid=8 objectname=pa.dbo.prod1 indexname=PK_a id=lock1608ee1380 mode=RangeS-S associatedObjectId=72057594811318272
owner-list
owner id=process5d84988 mode=RangeS-S
waiter-list
waiter id=process5daddc8 mode=RangeI-N requestType=convert
keylock hobtid=72057594811318272 dbid=8 objectname=pa.dbo.prod1 indexname=PK_a id=lock1608ee1380 mode=RangeS-S associatedObjectId=72057594811318272
owner-list
owner id=process5daddc8 mode=RangeS-S
waiter-list
waiter id=process5d84988 mode=RangeI-N requestType=convert

Don't know. Perhaps these can help. I scanned the second link but didn't see much about Ending Deadlocks. I'd say the Fourth link probably has better information than the first three links. But maybe read them all just in case the Fourth is missing something
one of the first three have.
Deadlocking
Detecting and Ending Deadlocks
Minimizing Deadlocks
Handling Deadlocks in SQL Server
Google search for "SQL Deadlock"
La vida loca

One target table is loading from two different source but same columns but one source is in a database and other is in a flat file.

Hope you all are doing good.
I have a business issue to be implemented in ODI 11G. Here it is. I am trying to load a target table from two sources having same coulmn names. But one source is in file format and other is in Oracle Database.
This is what i think i will create two mappings in the same interface using Union between the sources. But i am not sure how the interface would connect to different logical architecture to connect to two different sources.
Thanks,
SM

You are on the right track, this can all be done in a single interface. Do the following
1) Pull your file data model into the source designer and and your target table model to the target pane.
2) Map all the relevant columns
3) In the source designer create a new dataset and choose the UNION join type (this will create a separate tab in the source designer pane)
4) Select the new dataset tab in the source designer pane and pull your source oracle table data model into the source designer. Map all the relevant columns to the target
5) Make sure that your staging location is defined on a relational technology i.e. in this case the target would be an ideal candidate as that is where ODI will stage the data from both file and oracle source and perform the UNION before loading to the target
If you want to look at some pretty screenshots showing the steps above take a look at http://odiexperts.com/11g-oracle-data-integrator-part-611g-union-minus-intersect/

Moving iWeb to my iDisk so I can access it from two different machines

Hi,
Wondering if anyone has any experience in updating iWeb from more than one Mac?
I've just migrated from my old MacBook (running Tiger) to my new MacBook Air (running Snow Leopard). The migration has of course brought over all my iWeb files as well. As my MacBook Air is for travelling, I would ideally like to leave most of the the management of my iWeb sites to my old compouter which will stay at home and continue as usual. However it would be also be convenient if I could alter the iWeb sites with my Air from time to time.
I've read that all the details and files for iWeb sites are stored in the "Domain" file in /Library/Application Support/iWeb/ , however I now have two Domain files, one on each computer, and I'm terrified to change anything using the new one in case I corrupt the websites...
Could I move one of these "Domain" files to my iDisk, so the iDisk version could be the "master". That way, when I want to alter something, I could connect to the iDisk using iWeb on whichever computer I'm using (if that is possible), and alter the details there on the iDisk so there are no conflicts.
It might be an issue that my old Macbook is running iWeb'08 and Tiger, and my new one is running iWeb '09 and Snow Leopard? If this would make it impossible then I'd delete all iWeb sites from the new MacBook Air except I'm afraid that might delete the websites from the server, as both computers are linked to the same MobileMe account!
I'd be very grateful for any advice, even if it's only how to safely delete the site from the new computer.
Thanks,
Sarah

sarahsmoff1 wrote:
Do you know though if it's possible as a concept to store the iWeb Domain file straight onto your iDisk and therefore modify the iDisk copy directly (as the master) every time you open iWeb on your mac?
Sarah ~ I've never tried that, but perhaps it's possible. Once you've transferred the Domain file to iDisk, double-clicking it there should open your site in iWeb. And iWeb should remember that location in future so that when you open iWeb (rather than the Domain file), it will open the Domain file that's on iDisk.
But even if that were to work, I think it's riskier than the normal case of working from the Domain file on your Mac. You'll still need to separately backup the Domain file on iDisk and, when you do a Save or Publish, iWeb will have to update the Domain file on iDisk — which will take more time than usual and perhaps cause iWeb to think there's a problem.
Perhaps others would differ, but I think it's best to have your "master" Domain file on your Mac and, after updating your site, copy the Domain to iDisk for backup. The Backup app in your Applications folder can be used to do this...
Once you've created a "Plan" in the Backup app, click on the Plan menu and choose Full Backup — which will add (rather than incrementally modify) a new copy of the Domain file to iDisk. And, as time passes, manually delete previous Domain file backups from iDisk that you no longer need. To confirm that the Backup app has copied your Domain file to iDisk, go here:
http://www.me.com/idisk
...and click on the Backup folder in Home. To delete an unneeded backup from that folder, select the backup and then click the Trash icon.

Mail freezes on opening - two different machines on same day

Trying to do some remote IT support for my coworkers with an odd Mail.app issue that can't be coincidental.
Both machines are MacBook Pros running 10.4.11 and should be fully updated. Both users are using Mail.app with POP e-mail through our domain name server.
When either/or opens their Mail application while connected to the internet they get a spinning beach ball and are unable to use mail. The odd things is, both users are on different sides of the country and the problem started at the same time with both of them. This problem does not occur when the machines are not connected to the net.
I figured that either they both received an e-mail that is blocking the system or have some conflict with their Verizon WAN cards. We have taken the following steps with one of the machines:
1. Start mail with the Shift key held down to deselect the mailboxes. Closed the preview window.
This does not have any effect while the machines are connected - there is still the same problem.
2. Delete the preferences file and reenter all account info.
This also had no effect.
Any thoughts on possible causes or solutions?
Thanks!
Chuck

Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. Leave checked (enabled) only the port configuration needed to connect to Internet and Built-in Ethernet (in that order if not the same), uncheck (disable) the rest of network port configurations, and see whether that helps — if it doesn’t, turn ON again the ones you want enabled.
Try launching Mail under the following conditions (you may need to force quit it first if it’s running) and post back with your observations:
A. Holding the Shift (⇧) key down until the main window appears. This tells Mail to not select any mailboxes or load any messages upon start up.
B. With no Internet connection.
You may also try trashing the Mail cache:
1. (Force) Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Caches/.
3. Locate the Mail cache folder (not to be confused with the ~/Library/Mail folder where all your mail is stored) and move it to the Desktop (to be deleted after opening Mail and checking that all your mail is there, i.e. after making sure that you didn’t remove the ~/Library/Mail folder by mistake).
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

IWeb doesn't complete publishing - Using two different Mac's, works on 1

Hi,
I've recently attempted to edit my sites from two different machines; I have correctly copied and used the Domain file. The problem is that when I try to publish the site, iWeb creates the pages, gets to the empty circle which starts filling up and then it tends to stay like that without completing. This is strange as for a test I was only trying to load a blank page. Futhermore Activity monitor shows that data is being sent, actually it was Mb after Mb for a blank page and after 30mins or so i called it a day and quit iWeb, after which activity monitor showed that the data being sent has stopped. The page hadn't uploaded. iWeb still publishes fine on the other machine and I can write and read from my iDisk manually. But cannot successfully publish from this machine.
Any Ideas?

Well i had a problem similar. Here are something to try. TRY
1. Un-Plug Or Turn Off You Airport Or Internet Cord For Thirty Minutes
2. Log out of your .mac account from the preferences and then log back in ten minutes later
Well i hope this works. I just hate it when something is suppose to work and it does not.

JDBC connection to two different machines from the same program

I want to use JDBC to connect to two different databases that are on two different MySQL installations on two different machines.
One of the installations is MySQL 4.1.12 and the other is 4.1.14-nt
For some reason, all my statements seem to be going only to one machine, even though I am very clearly set it up to go to two different machines.
Does anyone know whether connecting to two different installations from one program presents any unusual problems?
Thanks.

Unless there is some horrible defect in the MySQL JDBC driver (which I doubt!), there should be no problem and like the other poster says, please post snippits of your code so we can see what your doing...

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
What we found from out testing:
- The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
- The file can be closed and Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
- Also, until the Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file.
Example Scenario:
- User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
- Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
- User 1 saves his file and closes it - but Dreamweaver is still open.
- User 2 also saves his file and leaves Dreamweaver open.
- The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
- If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
- Same for User 2, he will open 'his' version with 2300 lines in.
Other information:
- Files are opened directly from the server
- Sometimes the users will save incrementally and re-open
- Most of the time users will save incrementally and keep the files open
- The users will never not save incrementally and just save when closing the file once finished
- The users are usually working on the files all day
- It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
Anyone know if this is a known issue?
Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
Thanks

Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
Mylenium

I would like to import two different cf cards from two different cameras into the same project/folder and have them be in order of the times they were taken, is there a trick?

I would like to import two different cf cards from two different cameras into the same project/folder and have them be in the order of the times they were taken, any ideas on how to do this?

Just import them normally and sort the project by date. They will fall into place. If you tried this and it isn;t happening then make sure the data and times on the two cameras are identical and make sure you are sorting by date and time and nothing else.

HT4061 How do I consolidate purchases from two different ids that are on the same bank account, and eliminate the extra id without losing any purchases?

How do I consolidate purchases from two different ids that are on the same bank account, and eliminate the extra id without losing any purchases? I want my music to match on both ipad and computer.

Purchases are forever tied to the AppleID they were bought with. There is currently no way to consolidate AppleIDs. Sorry.

Setting Up a New Mac From Two Different Time Machine Back-ups?

Greetings Apple People,
I am planning on getting a new iMac. Right now my wife I are still using our separate MacBooks from college. Both of them have Time Machine back-ups. We would like to setup our new iMac to have two different users. Is it possible to setup each of the users on the new iMac from our respective Time Machine back-ups?
I know you can do this seamlessly with one Time Machine back-up, but can you do it from two different back-ups, essentially merging the two, while keeping the separate user profiles?
Thanks!

Follow the steps in Pondini's Setup New Mac guide using one computer as the source on first boot. Then, hook up the second computer and use the Migration Assistant to transfer the second user account and nothing else. Don't use the TM backup because it's much slower doing it that way than directly from each machine.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Sale of same material from two different storage loactions

hi,
how can i configure to sale same material code from two different storage loactions?
for eg if material code is 15000 and it is extended in two storage location A and B.My requiremnet is i want to sale from both storage loction at same time A and B both.How can i map it?
thanks
Nakul

Dear Nakul Raj,
If you want to sale same material from different storage locations it can be done.
First raise the sales order enter the material code and quantity as a first line item and give the storage location "A" in item shipping tab.
Then give the same material code and quantity (how much you want to send) as a second line item with storage location "B".
Then save the document, do the delivery, the storage locations will be copied from order to delivery, if you want to change you can do so.
Do the PGI.
Hope it will resolve your issue.
Please reply if any further clarifications
Kindly try and let me know the result
Thanks&Regards
Raghu.k

[svn:bz-trunk] 21394: bug fix for watson 2887837 Not getting duplicate session detected error when same flex client id is used from two different HTTP sessions in CRX .

Revision: 21394
Revision: 21394
Author:   [email protected]
Date:     2011-06-16 12:34:13 -0700 (Thu, 16 Jun 2011)
Log Message:
bug fix for watson 2887837 Not getting duplicate session detected error when same flex client id is used from two different HTTP sessions in CRX.
get the sessions id before we invalidate the duplicate session.
Checkintests pass
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseHTTPEndpoint.java

For our profect I think this issue was caused as follows:
Believing that remoting was full asynchronous we fired a 2 or 3 remote calls to the server at the same time ( within the same function ) - usually when the users goes to a new section of the app.
This seemed to trigger the duplicate http session error since according to http://blogs.adobe.com/lin/2011/05/duplication-session-error.html two remote calls arriving before a session is created will cause 2 sessions to be created.
Our current solution ( too early to say it works ) is to daisy chain the multiple calls together .
Also there seemed to be an issue where mobile apps that never quit ( thanks Apple! ) caused the error when activated after a few hours.
I guess the session expires on the server and the error above occurs on activation.
So the mobile apps now ping the server with a remote call when activated after sleeping for more than one hour.
All duplicate http errors are silently caught and reported.
Fingers crossed we won't get any more!

Screen saver won't start since Lion upgrade. Two different machines, same issue.

Screen saver won't start since Lion upgrade. Two different machines, same issue. Help

For anyone following this thread, I've found a solution to my problem. Turns out that a cute widget called FishTank appears to be the culprit. With it running in Dashboard (even when I don't see Dashboard) the Screensaver and Sleep functions don't work. I turned it off, not because I'm clever, just because I tired of it, and voilà, Screensaver and Sleep are now working. It can stay in my widgets list without any problem, it just can't be turned on. I'm going to delete it anyway, however.
Hope this points the way to solutions for some of the rest of you!
Cheers!
Keith

How to handle an update of the same record from two different user JSP

how do you handle an update of the same record from two different users in JSP... if one person updates the record from one drop downs should be updated as well.. is the possible.

I'm not sure whether I understand your question. If one user changes a record then you would like other users to see those changes. Normally those changes will be visible to other users when they refresh their browser, after the first user has committed changes to the record. I you want to be sure that the same row isn't updated at the same time by to different user, you need to configure some locking (pessimistic locking) - this depends of what technology you use. In EJB3 pessimistic locking is performed by adding a version to every entity object. If you are using ADF, the framework is able to handle either pessimistic or even optimistic locking.
If you want the changed row to be updated in other users browsers without any user interaction by these users, you should take a look at Reverse Ajax (ex. DWR http://ajaxian.com/archives/reverse-ajax-with-dwr) - or Ajax in general. But you will never get a realtime solution, where changes is visible in other users browsers right after each record update.

Publishing from two different machines to same DOT MAC - WATCH OUT!

Similar Messages

Maybe you are looking for