ColdFusion 8 Web Server Config tool fails
The Web Server Configuration tool has worked in the past on
my dev server under Sun ONE Java System Server, but it fails when I
try to start the tool. The message returned is:
exception in thread main java.lang.unsatisfiedlinkerror:
sun.awt.windows.wcanvaspeer
I've Googled this message and see that a few others have
encountered the same issue, but did not see any resolution. Any
help would be greatly appreciated.
I am having this same problem. I have uninstalled Windows
Defender and disabled Windows Firewall and no matter what I do, the
wsconfig utility does not find any servers on localhost. I do get
the Add/Exit buttons, but when I click Add, I don't get anything.
I've modified C:/CFusionMX7/runtime/lib/security.properties
to include:
jrun.trusted.hosts=localhost,127.0.0.1
Which jndi.properties should I look at?
C:\CFusionMX7\runtime\lib\client\CLIENT-INF or
C:\CFusionMX7\runtime\servers\coldfusion\SERVER-INF
Should either of these files be modified?
Restarting Coldfusion has not made a difference.
Similar Messages
-
JRUN Upgrade for Web Server Config Tool
Recently, I applied the latest connector update discussed in
APSB07-02. Today, I attempted to create a connector to my new CF
cluster and get the following error when using the Web Server
Config tool:
"The JRun server(s) found on host 127.0.0.1 must be upgraded
to use this version of the Web Server Configuration tool"
CF 7.0.2HF1
JRun 4 Updater 6
W2k3 SP1
What update is it refering too?This issue was asked in 2007 but never answered. It's now 2010 and I am experiencing the same problem. I'm trying to add a new IIS web server for CF. Running CF 7 and the web config tool worked 12 months ago. Now it doesn't... saying the "Jrun server must be upgraded to use this version of the Web Configuration Tool". I've done one jrun patch that I am aware of in the past few months.
So now, does anyone have an answer as to what I have to do to get this thing to run????
Thanks,
...Wes -
Web server config tool problem
Hi, I just installed coldfusion 702. At the end got an error
that I need to manually configure web server through the tool. When
I open the tool it does not show any existing servers. I have
checked - IIS is running. I can access the localhost page.
Coldfusion server is running. Checked that in control
panel>administrative services>services. I have disabled all
firewalls, antivirus, privacy service. I am using XP sp2. Have read
through forums and tech notes - no luck. Any advise would be
greatly appreciated. The wsconfig log shows the following error
message:
"error Could not connect to any JRun/ColdFusion servers on
host localhost.
Possible causes:
o Server not running
-Start Macromedia JRun4 or ColdFusion MX server
o Server running
-JNDI listen port in jndi.properties blocked by TCP/IP
filtering or firewall
on server
-host restriction in security.properties blocking
communication with server
jrunx.connectorinstaller.NoServerException: Could not connect
to any JRun/ColdFusion servers on host localhost.
Possible causes:
o Server not running
-Start Macromedia JRun4 or ColdFusion MX server
o Server running
-JNDI listen port in jndi.properties blocked by TCP/IP
filtering or firewall
on server
-host restriction in security.properties blocking
communication with server
at
jrunx.connectorinstaller.CIJndi.findServers(CIJndi.java:477)
at
jrunx.connectorinstaller.CIJndi.<init>(CIJndi.java:141)
at
jrunx.connectorinstaller.CIJndi.<init>(CIJndi.java:147)
at
jrunx.connectorinstaller.ConnectorInstaller.parseArgs(ConnectorInstaller.java:228)
at
jrunx.connectorinstaller.ConnectorInstaller.<init>(ConnectorInstaller.java:56)
at
jrunx.connectorinstaller.ConnectorInstaller.main(ConnectorInstaller.java:750)"I am having this same problem. I have uninstalled Windows
Defender and disabled Windows Firewall and no matter what I do, the
wsconfig utility does not find any servers on localhost. I do get
the Add/Exit buttons, but when I click Add, I don't get anything.
I've modified C:/CFusionMX7/runtime/lib/security.properties
to include:
jrun.trusted.hosts=localhost,127.0.0.1
Which jndi.properties should I look at?
C:\CFusionMX7\runtime\lib\client\CLIENT-INF or
C:\CFusionMX7\runtime\servers\coldfusion\SERVER-INF
Should either of these files be modified?
Restarting Coldfusion has not made a difference. -
ColdFusion 9 Web Server Configuration Tool problem
I am using:
ColdFusion 9.01
Oracle iPlanet Web Server 7.0.13
Windows 2008 R2 Standard
When I try to use the Web Server Configuration Tool, I get the following message: warning "connectors/nsapi/intel-win64/prebuilt/jrun_nsapi.dll". Could it be an incompatability with the versions of software that I am using? Has anyone successfully configured ColdFusion 9.01 with Oracle iPlanet Web Server 7.0.13?
I can't get past this message (see below).
The wsconfig.log file has the following:
02/14 00:39:57 debug Parsing Sun ONE Web Server (iPlanet) configuration file G:\Program Files\Oracle\WebServer7\https-CFAdmin\config\magnus.conf
02/14 00:39:57 debug Parsing Sun ONE Web Server (iPlanet) configuration file G:\Program Files\Oracle\WebServer7\https-CFAdmin\config\obj.conf
02/14 00:39:57 error connectors/nsapi/intel-win64/prebuilt/jrun_nsapi.dll
java.io.FileNotFoundException: connectors/nsapi/intel-win64/prebuilt/jrun_nsapi.dll
at jrunx.connectorinstaller.JarUtils.extractToFile(JarUtils.java:72)
at jrunx.connectorinstaller.CIUtil.extractConnector(CIUtil.java:274)
at jrunx.connectorinstaller.iPlanetInstaller.installConnector(iPlanetInstaller.java:136)
at jrunx.connectorinstaller.ConnectorInstaller.installConnector(ConnectorInstaller.java:341)
at jrunx.connectorinstaller.ConnectorInstaller.doIt(ConnectorInstaller.java:275)
at jrunx.connectorinstaller.ConnectorInstaller.main(ConnectorInstaller.java:765)I'm using Solaris 10 SPARC, iPlanet 7.0.15, and I'm not going to use Apache!
Note: I made a slight modification to the LD_LIBRARY_PATH_64 reference in the startup script for iPlanet.
You have to do this to make the virtual server use the 64-bit libraries.
vi /sun/webserver7/https-<config_name>/bin/startserv
look for this line:
LD_LIBRARY_PATH_64="${SERVER_LIB_PATH_64}:${SERVER_JVM_LIBPATH}:${LD_LIBRARY_PATH_64}"; export LD_LIBRARY_PATH_64
and change it to this line:
LD_LIBRARY_PATH_64="${SERVER_LIB_PATH_64}:${SERVER_JVM_LIBPATH}:${LD_LIBRARY_PATH_64}:/us r/sfw/lib/sparcv9"; export LD_LIBRARY_PATH_64
I'm moving from CF8 ENT to CF9 ENT.
Here's the problem: iPlanet virtual server is configured for 64-bit operation; the connector in CF9 is 32-bit.
Question: What Program is Making this file ---> libjrun_nsapi.so ??
I'm assuming CF is creating it, so try to follow my logic here.....
CF9 doesn't want to produce libjrun_nsapi.so in 64-bit mode.
The file is located here:
/opt/coldfusion9/runtime/lib/wsconfig/1/libjrun_nsapi.so
Instead it spits out a 32-bit file....
# file libjrun_nsapi.so
libjrun_nsapi.so: ELF 32-bit MSB dynamic lib SPARC32PLUS Version 1, V8+ Required, dynamically linked, not stripped, no debugging information avail
It's supposed to look something like this:
# file libjrun_nsapi.so
libjrun_nsapi.so: ELF 64-bit MSB dynamic lib SPARCV9 Version 1, dynamically linked, not stripped
I found out that when I use CF8, the installer asks for 64-bit configuration during install,
AND the initial startup makes the 64-bit connector.
In CF9...no such menu item; it doesn't mention 32/64 bit anything.
How do you force CF9 to produce a 64-bit libjrun_nsapi.so file?
This creates the 32-bit file...
cf_root/runtime/bin/wsconfig -server coldfusion -ws sunone -dir /sun/webserver7/<config-name>/config -coldfusion -v
When I add -ws64 it breaks the script....
cf_root/runtime/bin/wsconfig -server coldfusion -ws64 sunone -dir /sun/webserver7/<config-name>/config -coldfusion -v
How do you force CF9 to produce a 64-bit libjrun_nsapi.so file?
FYI: I grabbed the libjrun_nsapi.so file from my CF8 ENT install, and used it in my CF9 ENT install.
No errors from the web server, but it's running dirt-slow now.
Could be the file because the libjrun_nsapi.so was created to connect with CF8, not CF9 !?
How do you force CF9 to produce a 64-bit libjrun_nsapi.so file? -
Communication problem the web server extension (WGATE) failed to receive a
Hi,
When a user tries to access his timesheet he get the below error:
<b>communication problem the web server extension (WGATE) failed to receive a response from the ITS web service</b>
Only ONE user is getting this error. If everyone get\s the same we can check on the ITS side, but if only ONE user is getting it.
Please help.
Regards,
PKHI ALL,
Thanks for your time. The issue got resolved however without cheking the logs itself. The problem was with the scripfile. All other users and all other scripts were working, except one. And it got recified.
Regards,
P. Kumaravel. -
Calling SQL Loader from ColdFusion Web Server
We are trying to Load Data files into Oracle through a Cold Fusion Web Application. Users will browse to a local file on their computers, click a button, and our application will use SQL Loader to load the data into oracle. The ColdFusion web server is Unix and the 11g database server is Linux. When we run the ColdFusion code below we get a file not found error, the sqlldr executable cannot be found. Do we need to install an Oracle client or something on the ColdFusion Web server to get this to work?
<cfexecute name="sqlldr" arguments="ADVDEMO@ADVDEMO/Transact2011 control=/space/users/www/advfiles/ControlFiles/BS/Bio_ControlFile.ctl" timeout="500"></cfexecute>'sqlldr' is part of Oracle server or (full) Oracle client software - NOT the OS - so indeed you need to install at least the client. Unfortunately 'sqlldr' is not part of the Instant Client, which is much smaller than the full client.
Some guys tried to add 'sqlldr' manually:
http://my.opera.com/onyxluo/blog/2007/12/28/add-sql-loader-into-oracle-10-instant-client
Werner -
Oracle iPlanet Web Server 7 - Configuration Failed
Hi There,
Installing Oracle iPlanet Web Server
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installation Summary
Product Status Information
1. Oracle iPlanet Web Server Configuration Failed View log file
1. View log file
2. Done
Jul 5, 2011 4:29:16 AM com.sun.web.installer.common.dialogs.
CustomDirectorySelectionPanel isDisplayComplete
INFO: Installing Oracle iPlanet Web Server 7.0.9
Jul 5, 2011 4:30:19 AM com.sun.web.installer.web.actions.PostInstall_core
install
INFO: Start core server configuration
Jul 5, 2011 4:30:19 AM com.sun.web.installer.web.actions.PostInstall_core
installJDK
SEVERE: JDK copy failed
Jul 5, 2011 4:52:36 AM com.sun.web.installer.common.dialogs.
CustomDirectorySelectionPanel isDisplayComplete
INFO: Installing Oracle iPlanet Web Server 7.0.9
Jul 5, 2011 4:55:00 AM com.sun.web.installer.web.actions.PostInstall_core
install
INFO: Start core server configuration
Jul 5, 2011 4:57:07 AM com.sun.web.installer.web.actions.PostInstall_core
configureServer
INFO: Invoking the server configuration script
Jul 5, 2011 4:57:08 AM com.sun.web.installer.web.actions.PostInstall_core
configureServer
WARNING: The backend configurator failed
Jul 5, 2011 5:15:10 AM com.sun.web.installer.common.dialogs.
CustomDirectorySelectionPanel isDisplayComplete
INFO: Installing Oracle iPlanet Web Server 7.0.9
Jul 5, 2011 5:15:46 AM com.sun.web.installer.common.dialogs.
CustomDirectorySelectionPanel isDisplayComplete
INFO: Installing Oracle iPlanet Web Server 7.0.9
Jul 5, 2011 5:16:43 AM com.sun.web.installer.common.dialogs.
CustomDirectorySelectionPanel isDisplayComplete
INFO: Installing Oracle iPlanet Web Server 7.0.9
Jul 5, 2011 5:21:37 AM com.sun.web.installer.web.actions.PostInstall_core
install
What could be the problem?[root@local java]$ ls
default jdk1.6.0_02 jdk1.6.0_20 jdk1.6.0_26 latest
[root@local java]# ./setup --javahome /usr/java/jdk1.6.0_26
Product : Oracle iPlanet Web Server
Location : /opt/oracle/webserver7
Disk Space : 231.37 MB
Administration Command Line Interface
Server Core
Start Administration Server [yes/no] [yes] {"<" goes back, "!" exits}:
Ready to Install
1. Install Now
2. Start Over
3. Exit Installation
What would you like to do [1] {"<" goes back, "!" exits}? 1
Installing Oracle iPlanet Web Server
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installation Summary
Product Status Information
1. Oracle iPlanet Web Server Configuration Failed View log file
1. View log file
2. Done
What would you like to do [2] {"!" exits}?
I can not see the option. -
Config tool fails when trying to modify an existing Oracle EPM instance
I have a single server windows 2008 server environment with Foundation, prlanning, essbase , raframework, and EAL. I also have ODI installed in the same server. I was trying to add Strategic finance to the same envirnment . I downloaded the required files according to oracle install doc.
The installation was successful without any errors.
Problems started when I tried to configure it. AsI opened the config tool and chose
Modify an existing Oracle EPM instance ...
the config tool gave an error that
An unexpected error occurred and the application will have to be shut down . Review the error log , correct error condition and re-launch the application .
Kindly share your thoughts on this issue
Edited by: Saurav Sarkar on Apr 5, 2012 12:55 PMDid you examine the configtool log to see if it has more information on why the configurator shutdown, if you not sure where to find the logs have a look at http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_troubleshooting_11121/ch03s02s05.html
Cheers
John
http://john-goodwin.blogspot.com/ -
Connect to ColdFusion web server
I just installed Dreamweaver CS 6 and would like to configure my web server, but can not find the place to connect the server.
Can you please advice how to configure my Dreamweaver to work to connect the web server?
Your help and information is great appreciated,
Regards,
Iccsi,Thanks for the information and help,
Yes, I got it,
Thanks again for helping,
Regards,
Iccsi, -
Minimum Web Server config required
Hi Support, all,
I will need the following information for hosting my www.
1. What is the OS required for hosting iWeb pages, and what should be the minimum OS Version?
2. Does the license (EULA) for the iWeb application allows users to use it commercially? (like for my - company website - shall I use it?)
3. Any other suggestions ... if you have in mind
Thank you,
Rgds,
Sriram1. Every computer can run a webserver. I used my Mac LC 18 years ago.
Use your own.
http://www.wyodor.net/Tutorials/iWebDemo/
http://coolestguyplanettech.com/downtown/install-and-configure-apache-mysql-php- and-phpmyadmin-osx-108-mountain-lion
https://discussions.apple.com/docs/DOC-3083
http://clickontyler.com/blog/2012/02/web-sharing-mountain-lion/
http://francoisdeschenes.com/2012/02/19/how-i-fixed-apache-on-os-x-mountain-lion -developer-preview-1
http://tidbits.com/article/13168
http://www.moofgroup.com/code/2012/07/31/what-the-personal-web-sharing-gone-from -mountain-lion/
MySQL :
http://www.wyodor.net/sql/tut.html
https://discussions.apple.com/docs/DOC-3082
2. Yes, you can use iWeb for your business
3. Browse the interwebs. -
Hello,
I selected the CF internal web server during install (IIS was
not available.) I managed to get through it and the install
succeeded. Now I used the web server config tool to switch to IIS
(now it's available.) My websites now don't come up. I'm pretty
sure it's a security/directory issue but I can't figure out where
the problem is.
Adobe support is non-existent if you don't have $500 to ask a
question.
Thank you.I'm not sure what you mean by market economy but if you mean
capitalism then of course. Any economist will tell you that a
client wants value for his money. By denying me real tech support
even before the product was installed they are pushing away a loyal
client and possibly failing to make a new one. Hardly good
economics if you ask me. Further, it hurts all of us if ColdFusion
loses market share because it's harder to form communities and sell
our services to clients.
Ken did provide me phone support after I kicked and screamed
and he was instrumental in helping me with the installation. We
were able to solve the issue(s) within a couple of hours rather
than the three days it had taken me up to then. Those three days
were torturous trying to figure out what was wrong with the
install. Also, although we did get the install completed and set
up, Ken is being modest. I doubt I could have completed the set up
without his support on the phone. It was not simply a security
issue.
Adobe really needs to rethink the way they're doing support.
Of course I am one single exaple, but in my case a few minutes on
the phone at the onset of this problem would have saved everyone
much time and effort.
We have other server software that perform other tasks such
as Imail from Ipswitch that the way they work it is with annual
contracts. You buy a contract and get the software and support for
a year. If the following year you don't want to upgrade the
software and don't need support then you don't pay.
Adobe is selling the software as is. You want it fixed (is it
a bug in the Adobe product or you?), you have to pay. And I know
they have "free" installation email support. In my case they
emailed me to check the instructions first and then when I
complained they emailed me to call them to do it over the phone.
When I called they said: Yes, we can do it over the phone but you
have to pay. -
Hi all,
I am new to cold fusion and I want to have a stand alone cold
fusion server with my IIS server on a different box. Is this
possible? I have installed the product but it looks like it is
pointing to the local IIS and I don't seem to have the option to
select the web server that I want it to go ( I was using the web
server config tool). Any ideas? I am using CF 7 Standard ed.
Thanks!It is my understanding, but I have never done this, that you
do it the
other way around.
You will need to copy the web server config tool to your IIS
web server.
Then run it there and point to the CF server.
I suspect there are a few other pieces that will need to live
on the web
server but could not tell you what. But I do know that people
do this
without too much difficulty. -
How to change web server from inbuilt Tomcat to IIS in already configured Cold Fusion 10
how to change web server from inbuilt Tomcat to IIS in already configured Cold Fusion 10
You just need to run the Web Server Configuration Tool to connect ColdFusion to IIS. It can be found in the ColdFusion program group off of the Start menu. Be sure to run it "As Administrator".
-Carl V. -
Web Server Aliases not working!!
I have set up a virtual domain "internal.blahblah.com" within that I have setup Web Server Aliases. However, I cannot get them to resolve for the life of me! I tried somthing as simple as * . No go when I enter "server.internal.blahblah.com". Anyone else having these problems? Any solution?
It's not clear from your post what you're trying to do, or what you've done so far.
Let me see if I can decode...
I have set up a virtual domain "internal.blahblah.com"
OK, so this is a 'Site' in Server Admin -> Web, right?
However, I cannot get them to resolve for the life of me
Define 'resolve', please. Do you mean 'resolve' as in DNS name resolution, or 'resolve' as in access the web site, even when DNS is properly configured?
I tried somthing as simple as *
Umm.. where have you entered *?
In DNS? In your web server?
If in the web server config, are you using 'Alias' (a URL remap) or 'ServerAlias' (a secondary name for the server)?
No go when I enter "server.internal.blahblah.com".
'server.internal.blahblah.com' is in no way related to 'internal.blahblah.com'. In order for this to work you need to have a DNS entry for 'server.internal.blahblah.com' that points to your server - hence the question regarding DNS above. -
I have CF 7 standard (not enterprise) installed on a W2K3
server and also have IIS installed and running on this server.
I have 2 web sites both developed in CF and was wondering if
I can successfully host both these web sites on the server. I am
trying to work out whetehr this is OK or do I really need CF
Enterprise. I am thinking that I should be able to run both these
web sites from the one server.
Thanks in advance for feedbackj.
RegardsHow to you add the JRunScripts virtual directory to IIS? I
ran the Web server configuration program from the CF 7 MX group and
selected IIS, ALL Sites and noting happened. Then, I ran it again,
this time I selected the Default Web Site and ran it again. Nothing
seems to happen. Now, when I run the Web Server Configuration tool
I get the list shows my web site twice, once as the defaul, an the
other one as the IIS All sites. Is this OK? I can't find any help
about this anywhere.
Maybe you are looking for
-
[SOLVED] steam: missing libc.so.6
I'm getting the following error when trying to run steam: lllars ~ $ steam Running Steam on arch rolling 64-bit STEAM_RUNTIME is enabled automatically Error: You are missing the following 32-bit libraries, and Steam may not run: libc.so.6 /home/lllar
-
Module pool in table control wizared
Hi I have created in module pool table control wizared created insert and delete rows in output. insert the data in table control the colume is not save. can u tell me the save the data in table control. pls tell me the flow of save button. after ins
-
Downloaded the latest itunes update and now can not upen itunes. Help.
Downloaded update for itunes about a week ago, and now cannot open itunes. How do I fix this? Bob G.
-
I recently switched from the PC world to the Mac. I developed a website using Frontpage, and now I would like to revise it using iWeb. Is there a way to import the website into iWeb so I can work on it and republish it? (From some other posts on the
-
Unable to use adhoc deskjet 6988
I used my deskjet 6988 in adhoc mode on my older laptop. I have a newer laptop now and I cannot get it to work. The settings on the printer report page are correct, the laptop connects with the hpsetup wifi signal and the settings on the laptop seem