"ColdFusion is undefined" js err -- not a /CFIDE mapping issue

I've seen the "ColdFusion is undefined" problem mentioned a
number of times, but it seems that the solution is invariably a
missing /CFIDE mapping on the web server. I'm experiencing this
problem myself, but the source of the problem is confounding me.
I've got a page with a cfgrid in it, and the first time I hit the
page, it displays just fine. When I go to another page, then come
back to the page with the CFGRID, an empty container displays and I
get the "ColdFusion is undefined" javascript error. I've tried
incorporating the cfajaximport tag, I've tried creating a new
mapping and using scriptsrc attributes, and nothing I do will make
that grid reappear short of restarting the CF service. After a
restart, it appears once. Go away and come back -- nada.
Ideas?

Just so there is a record of this on the Adobe site...
IF you are running Apache and have virtual hosts, be sure to add the line
Alias /CFIDE "c:/inetpub/wwwroot/CFIDE"
to the virtual host list. Of course change the path c:/inetpub/wwwroot/CFIDE" to whatever is set up in the CF Administrator.
Otherwise, none of your cfform stuff will work and you will get a 'Coldfusion' is undefined error.
Doug

Similar Messages

Control panel & cfide mapping: cfmx6.1+IIS6+win2003

Hi all,
I'm back in business with CF.
I am preparing the ground for a cf project I'm developing and
I started to put the things going on the server side.
The installation of CF mx 6.1 went fine, I choose the IIS as
web server and then the virtual site I want to be connected to CF.
As asked by the installer I choose also the one where CF
needs to put the /CFIDE stuff.
The idea was to have the control panel working on port
different from the 80 and accessible only on the local side.
It all went fine except one thing, the control panel is
always accessible, even not specifying the port where it was only
supposed to appear:
http://machineip:port/CFIDE/administrator
but also
http://machineip/CFIDE/administrator
and this is bad because I don't want to the CF control panel
to be accessible from the outside.
I noticed also in the "mappings" menu in the CF control panel
there is this /CFIDE mapping that I'm supposing is the cause of
this behavior.
If I have understand well this mapping is necessary for cf to
work correctly but there is a way to avoid the above?

At the end the solution was under my eyes. I'll post here,
maybe it can be useful for another IIS newbie like me.
To lock just a directory or file under IIS, open the IIS
control panel and select the site. On the right will appear the
list of the directories and files. Right click on them, then
properties --> directory security.
About my first question:
probably since the beginning I have not noticed that because
of the /CFIDE mapping in the list of the directories of the CF
conntected sites appears also the CFIDE dir. So just apply the
above.

Cannot send email from my iPhone or iPad. The server rejects a recepient for no apparent reason. The recipient is not new. This issue happens on reply or reply to all or froward; not a new email. What is happening?

Cannot send email from my iPhone or iPad. The server rejects a recepient for no apparent reason. The recipient is not new. This issue happens on reply or reply to all or froward; not a new email to the same recepient. What is happening?

I talked with a tech today and he said I cloud is having problems which should be resolved shortly.
In the mean time I used the .me smtp server settings which allowed me to send mail.

"The certificate is not trusted because no issuer chain was provided" error in all browsers for all websites.

As it says, Chrome, Firefox, and Internet Explorer all give the certificate error message for any and every website attempted - including the Firefox add-ons page. The specific error is the "no issuer chain was provided".
1) This problem is not on my computer - it is on my mother's computer in another city. Therefore, I cannot attempt every little possibility without flying over there - I'm looking for things I can tell her to do over the phone. The problem started today. I've already given her the list of anti-malware programs to go install and run from here:
https://support.mozilla.org/en-US/questions/982393
Note that, of course, she will have to accept the security certificate override to get to these things - I hope this isn't bad.
2) The problem started after she tried to use Skype, it hung for a very long time and would never log on. So she tried to reinstall it - and she said she clicked through a number of agreement screens and believes she may have installed malicious 3rd party software. This is ridiculous, is Skype now putting malware on people's computers through these bogus 3rd party add-ons at installation? I suppose it is possible Skype was hanging because of some other problem - but she did manage to reinstall Skype and got it to work (but now her internet certificates won't).
3) She has BitDefender. I am aware that it says here:
https://support.mozilla.org/en-US/kb/connection-untrusted-error-message
that she should turn off SSL scanning. She turned it off, it did not solve the problem. She turned it off and restarted, it did not solve the problem. She has had it on for the past 6 months and it has never caused a problem.
4) In addition, BitDefender reported today that it stopped a malicious program called MySearchDial.exe from attempting something it shouldn't. We went through this removal guide:
http://malwaretips.com/blogs/start-mysearchdial-removal/
however, the software MySearchDial was never actually installed into the windows install list, and we did not find any addons/plugins in any of the browser lists (note that Firefox add-ons cannot be accessed with a certificate error, it gives the error message but DOES NOT give you the option to add an exception so you can't access the add-ons). The only thing we found was (a) MySearchDial was default in the IE search engine list, despite there being no add-on, and (b) MySearchDial.exe was in the temp folder (now deleted). I note that I had BitDefender scan the temp folder *before* I deleted MySearchDial.exe, and it claimed no threats were found. What? It was BitDefender that warned me of it in the first place!
5) Time and date are correct.
6) Checked the Win 7 install log, only Skype, Skype Click-to-Call, and (for some reason) Mircosoft Visual Studio 2010 and Visual C++ were installed or altered today. I got paranoid about Click-to-call and asked her to uninstall it, but it didn't solve the problem.
7) The OS is Win7 64bit Home.
Anything beyond endless Malware removal programs (via list linked above) that we should try?

The only way to know what is going on is to retrieve the certificate and check who is the issuer.<br />
It is always possible that the server doesn't send the full certificate chain (intermediate certificates), so it might help to post a link to this website
Check the date and time in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
Check out why the site is untrusted and click "Technical Details to expand this section.<br>If the certificate is not trusted because no issuer chain was provided (sec_error_unknown_issuer) then see if you can install this intermediate certificate from another source.
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the issuer of the certificate.
You can see more Details like intermediate certificates that are used in the Details pane.
If "I Understand the Risks" is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
*Note that some firewalls monitor (secure) connections and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the website's certificate.
*Note that it is not recommended to add a permanent exception in cases like this, so only use it to inspect the certificate.

It seems cranky sometimes works, somtimes not. My other issue - is there a way to create a mail signature using the font I use in Outlook (or can I import that signature)?

I have a new iPhone 4s - having lots of trouble with Siri. It seems cranky - sometimes works, somtimes not. My other issue - is there a way to create a mail signature using the font I use in Outlook (or can I import that signature)? How can I find fonts availble on my phone?
Thanks for any help

Not in Acrobat unless your image is already in the PDF format.
This is a feature of forms created with LiveCycle Designer.

We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

Already gone through following three notes but didn't found resolution.
APXPAWKB: FRM-41830 When Clicking on Payment Document LOV (Doc ID 1081305.1)
R12: APXPAWKB: Payment Document Lov Is Empty When Entering A Payment (Doc ID 857587.1)
R12: Payment Workbench Error: FRM-41830 List Of Values Contains No Entries (APXPAWKB.FMB) (Doc ID 1323875.1)

HT1386 i've already synced my itunes on my laptop with my iphone but it's not synching all of the albums/songs. Everything was purchase through itunes so i'm not sure what the issue is.

i've already synced my itunes on my laptop with my iphone but it's not synching all of the albums/songs. Everything was purchase through itunes so i'm not sure what the issue is.

What settings do you have in iTunes? Is it set to sync all music, it is set to sync only checked songs? Is there anything different about the songs that it is not syncing. Is it possible they were they purchased with a different Apple ID?

Location is not available to mapped network drive in Windows 8 using Synology NAS

Original Thread:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-files/location-is-not-available-to-mapped-network-drive/ca7eac5c-0e3d-494b-b488-e245978e4db9
I have recently upgraded to Windows 8.1 standard edition. I have come across a problem when using the option for mapped network drives. Under Windows 7 I would normally map a network drive (Synology NAS) and I could access all files, copy and paste, install
apps, and link media, all from within the mapped network drive. However, under Windows 8.1 I have come across a couple of problems.
1. When I try to copy a file from my "Mapped Network Drive" to the C:\Drive (OS Boot Drive), I get the following error,
"E:\ is unavailable. If the location is on this PC, make sure the device or drive is connected or the disc is inserted, and then try again. if the location is on a network, make sure you're connected to the network or internet, and then try again. If the
location still can't be found, it might have been moved or deleted."
However, if I copy a file from the "NETWORK/Network Location" the file copies just fine with no problems. And, If I also copy a file from a "Added Network Location" the file also copies just fine with no problems. And, if I copy a file from
my "Mapped Network Drive" to my D:\Drive (non OS Drive), the file copies just fine with no problems.
2. When I try to install apps from my "Mapped Network Drive" they will sometimes install and sometimes not (I am also choosing the option to run the programs as Administrator). Again if I try to install using either the "NETWORK/Network Location"
or an "Added Network Location" the apps install just fine with no problems.
3. When I link media (music or videos) from my "Mapped Network Drive" they will work but once I reboot they no longer work as if they have lost the file path or link of the original source location.
4. When I use FireFox (browser) and I set my default download dir to my "Mapped Network Drive" it will work once originally set it but after I reboot, it no longer works. However, again if I set the default download dir to either the "NETWORK/Network
Location" or an "Added Network Location" the default download dir works fine even after reboot.
While I am able to access my network drive using any of the three options, "Mapped Network Drive", "NETWORK/Network Location", and "Added Network Location" but only "NETWORK/Network Location", and "Added Network
Location"appear to be reliable. Tbh I would prefer to be able to use my "Mapped Network Drive" in Windows 8 as I have been able to under Windows 7.
More info:
I currently have UAC set to "Never Notify".
I also have Windows 8.1 installed on three different systems and all of them give me the same exact problems. One of the systems is a completely clean install with no 3rd party apps installed.
Just so its clear I am able to access the "Mapped Network Drive" but unfortunately this method of access appears to be unreliable in Windows 8 but in Windows 7 it works flawlessly.
If I map a network drive from another pc running windows 7 or 8, I can access and use the mapped drive with no problems. This problem appears to be related to the Synology NAS devices and I have researched the Synology forums but only found one thread about
the problem, here:
http://forum.synology.com/enu/viewtopic.php?f=49&t=76687
I have searched several forums and attempted to pick the brains of my local computer shops for any incite on this problem but I have been unable to find a solution/fix.
Any help resolving this is greatly appreciated.

Hi,
Based on your description, we can temporarily disable the firewall to see whether the issue persists.
For this issue seems related to the Synology NAS devices, in order to get professional help regarding the product, we can contact the vendor support to see whether the issue
can be fixed.
Best regards,
Frank Shen

Not able to map contents of xml to output using file adapter

Hi
i m not able to map the output of file adapter to a variable when reading an xml. the data is coming in the file adapter output variable but it is not mapping to other variable in assign or transform activity.I m using jdeveloper 11.1.1.4.0.Can anbody help me plz.
Regards
Sourbh

i am using file adapter as reference to synchronously read an xml file. i am able to see the flow trace in em console. the output variable of file adapter contains the data but when i m trying to assign the value to a variable i getting error. saying that some xpath is not returing any value.
i tried with transform activity also but same case is there.

Error: Could not read Header Mapping in Receiver Agreement

Dear SAP experts,
Newly installed SAP G7A PI 7.1(Acceptance box) was already released to customer.
We are doing an initial test (BAT phase), wherein, our end-to-end scenario is, from a EP Portal application ---> G7A PI 7.1 --> Trading Partner via AS2 protocol.
G7A PI is connected to Trading Partner via AS2 protocol.
Currently, our EP Portal application is in-active at the moment, that's why we used 'manual XI submitter', to send a message from G7A PI itself going to Trading Partner.
The message was success in the Integration engine of G7A PI, and the output message was produced.
As the message reached the Adapter Engine layer of G7A PI, we encountered a specific error,
Delivering the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: Fatal exception: com.seeburger.xi.connector.queue.TaskBuildException: Could not create CPAObjectMapper: InvocationTargetException caused by Could not read Header Mapping in Receiver Agreement: while trying to invoke the method com.sap.aii.af.service.cpa.Party.getParty() of an object returned from com.sap.aii.af.service.cpa.NormalizationManager.getXIParty(java.lang.String, java.lang.String, java.lang.String), Could not create CPAObjectMapper: InvocationTargetException caused by Could not read Header Mapping in Receiver Agreement: while trying to invoke the method com.sap.aii.af.service.cpa.Party.getParty() of an object returned from com.sap.aii.af.service.cpa.NormalizationManager.getXIParty(java.lang.String, java.lang.String, java.lang.String)
Basically, "Could not create CPAObjectMapper - InvocationTargetException caused by Could not read Header Mapping in Receiver Agreement"
I am thinking, one of the possible cause is that we used manual XI submitter, in G7A PI, instead of the utilizing the actual Sending system (EP Portal application).
Or possible cause is that the AS2 adapter in G7A is not yet stable, thus causing the issue.
We've already done successful connection when we're in GDD PI (Development box) during our SIT phase.
Objects in G7A were mirror of GDD PI.
Kindly advise for your inputs.
Thanks!
Gerberto

Hi,
It seems that the cause of the error is the unstable performance of the PI box, since, this was newly installed and there were patches that were not yet added.
Thanks for the support!
Gerberto

IOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer. Anyone have an idea what needs to be done?

iOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer. Anyone have an idea what needs to be done? The only solution we have found is to reboot the iPad. We don't have the option of restarting the wireless as so many people are on and it would further disrupt classes.

iOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer. Anyone have an idea what needs to be done? The only solution we have found is to reboot the iPad. We don't have the option of restarting the wireless as so many people are on and it would further disrupt classes.

Presentation variable is not supported in "SQL Issued"

hi, there is a presentation variable called @{ps_var} from a prompt
and I have written a custom sql and typed in "SQL Issued"
!http://img31.imageshack.us/img31/8673/customsql.jpg!
I found that the presentation variable is not supported in "SQL Issued" (exception flows when I clicked the "Set SQL" button.)
(in the captured screen, it is hardcoded as 'REPLACED_BY_PRESENTATION_VARIABLE', no error occurs when I clicked the "Set SQL" button. the result is correct.
however, when 'REPLACED_BY_PRESENTATION_VARIABLE' is replaced by @{ps_var}, exception flows when I clicked the "Set SQL" button.
is there an alternatives to avoid the error ? or any ways to assign the selected value from the prompt to this sql ?
thank you very much!

Just set your presentation variable with an other method.
Check here you will find how you can set a presentation variable for a filter
http://gerardnico.com/wiki/dat/obiee/presentation_service/obiee_presentation_variable_area

Not able to map the Bank's Format in R12 Payment interface

Hi All,
I have requirement to generate the flat file for a Bank to do the payments for Supplies in R12.
Bank has given list of column (117 columns) details in R12 for New Zealand Bank. and I tred to do one payment through this format and Got the XML file from log.
I am expecting the this XML file contains all the possible fields as per Oracle standard. But many fields I am not able to map the oracle columns with this XML file like PayeeBankAccount and PayeeAccountCurreny.
Please Suggest.
Thanks,
upender

Copy the payload from SXMB_MONI and paste it in the test mapping tool. See the context issues. That is the easiest step to diagnose the mapping issues. Check whether you miss mandatory fields or optional fields are not shown in the request as empty or so.

We have migrated data from virsa 4.0 to grc 10.1, all virsa mitigation approvers and controllers got migrated but we are not able to map new mitigation approver and controller to the mitigation ids.

Hello All,
We have migrated data from virsa 4.0 to grc 10.1, all virsa mitigation
approvers and controllers got migrated but we are not able to map new
mitigation approver and controller to the mitigation ids.
The steps we have done below.
1. We have created user id in su01 with necessary authorizations
2. we have declared this user id in Access control owners as a
mitigation approver and assigned to the organization unit
Now we are trying to map to newly created mitigation approver to the
mitigation id but we are not able to find that approver id for the mitigation ids. (only old mitigation ids came from VIRSA only we are able to see, not able to add new mitigation approvers / controllers to the mitigation ids)
Kindly check this issue, this is very critical for us.
Thanks in advance.
Regards,
Karunakar

Hi Karunakar,
- Assign Owners to Organization unit
- Make these owners as Mitigation Approver and Monitor
- Create Mitigation Id in this Org. unit
Regards
plaban

Im trying to find my iPhone via iCloud but i does not show a map with its last know location. It only shows the menu options. My iPad and Mac show up but the map of my iPhone does not.

Im trying to find my iPhone via iCloud but i does not show a map with its last know location. It only shows the menu options. My iPad and Mac show up but the map of my iPhone does not. Can anyone help?

If your phone is turned off or not connected to the Internet, you will be unable to locate it. Last known location is only stored for 24 hours.

"ColdFusion is undefined" js err -- not a /CFIDE mapping issue

Similar Messages

Maybe you are looking for