Collecting Process Chain Statistics

Hi anyone,
I'm looking to write some ABAP Code to collect Process Chain Statistics so they can be coherently evaluated and not by looking at the process chains individually. I'll be looking to identify variances in # of records, load times, etc. so I can send out alerts.
I've been able to collect a lot of Process Chain Process information so far using existing API and FM calls. I'm able to get down to the Process Log Levels so far, but I'm trying to think how to go about collecting the actual key figures I need.
<b>I'm looking to capture things like the following:</b>
- Statistics of each process chain and related process chain process like I need to know that my ODS activation started @ 10am actived 10,000 records and ended at 10:01 am. (how long it took).
- I need to know that my data load loaded 1,000 records and how long it took.
- I need to know that my rollup compressed x number of records and took how long.. Etc, Etc, Etc.
I know the BI Administration Cockpit in 2004s might provide some/most of this information, but it isn't an option right now.
The way I see it I really only 1 option with a 2nd potential option:
1. Most likely option is to write a program to go out and collect the statistics for all the processes executing the program on a scheduled basis.
2. Modify/Copy the process chain process classes to somehow output the statistics I need. No idea how I would do this yet.
So again I am currently down to the process level logs and just don't know how to collect the statistical key figures I need like how many records were loaded, compressed, activated, etc... I'm thinking of somehow parsing the logs to get the key figures, but that seems like it would be difficult.
Anyone have any suggestions or ideas how to collect this information so I can report on it?
I posted this here because I thought the bw abappers would frequent this area. Also, If anyone thinks this would be better suited in another forum then please suggest.
Thanks,
Ken Murray

Do you subscribe to BWexpert?
There is an article a person posted specifically on this...
<a href="http://www.bwexpertonline.com/">BE Expert</a>
"Identify Failed Data Loads with This Check Tool"
Thanks.
/smw
Message was edited by: Steve Wilson

Similar Messages

Process Chain statistics (new stats in 2004s)

Hi,
We have activated and are loading all stats (new ones) for 2004s. We are checking the stats through the portal. We have many stats showing in the default web templates used in the portal to display stats. Process Chain stats are the only ones showing no data...which can't be true because we have only been loading with process chains.
Where do you "activate" stats for Process chains themselves? I am aware of RSPC_API_CHAIN_GET_STATUS, but it appears with 2004s, delivered is a process chain statistics?
Thanks, Mark.

For data-load statistics of process chains and processes:
use 0TCT_C21, 0TCT_VC21 and 0TCT_MC21
For more Insights -
The new InfoProviders are:
For more highly aggregated query-runtime statistics:
0TCT_C01, 0TCT_VC01 and 0TCT_MC01
These replace InfoCube 0BWTC_C02.
For more detailed query-runtime statistics:
0TCT_C02, 0TCT_VC02 and 0TCT_MC02
These replace InfoCube 0BWTC_C02.
For data manager statistics:
0TCT_C03, 0TCT_VC03 and 0TCT_MC03
These replace InfoCube 0BWTC_C03.
For data-load statistics of process chains and processes:
0TCT_C21, 0TCT_VC21 and 0TCT_MC21
For data-load statistics of data transfer processes:
0TCT_C22, 0TCT_VC22 and 0TCT_MC22
For data-load statistics of InfoPackages:
0TCT_C23, 0TCT_VC23 and 0TCT_MC23
These deliver essentially the same information as InfoCube 0BWTC_C05 but they use the new InfoObjects. The remaining new InfoProviders also use the new InfoObjects.
For the current data-load status of process chains and processes:
0TCT_VC11 and 0TCT_MC11
For the current status of requests loaded to InfoProviders, InfoObjects that have been updated flexibly, and PSA tables:
0TCT_VC11 and 0TCT_MC11
Hope it Helps
Chetan
@CP..

Process Chain Statistics

hi,
I am workign on BI7.0/SP09.
There are many process chains running in my system daily, but not able to capture the process chain statistics (Cube is 0TCT_C22). When ran datasource 0TCT_DS21 in t-code RSA3, it shows no records extracted. Now unlike Infoprovider, queries and Web template, there is no option to start the statictics of process chain. For others, we can start the statictics via menu --> tools --> Setting for BI statistics.
Also I checked the table RSPCLOGCHAIN, there are many records in it and also field ANALYZED_STATUS is properly filled with values.
Now what to do? Please advice ASAP as struggling with this since long time.
Regards
PS

Process Chain Statistics Tables:
- RSPCLOGCHAIN, RSPCPROCESSLOG
<b>Data Flow</b>
     0TCT_DS21
0TCT_C21      0TCT_VC21
     0TCT_MC21
Hope it Helps
Chetan
@CP..

Error when collect process-chain

hi all,
When I collect the process-chain to transport in the transport-connection,an error occured in the below windows:
Object 'ATTRIBCHANEVEN_485MDFX3NYUF8PKGN9RSFATRD' (RSPV) of type 'Process Variants' is not available in version 'A'.
Could anybody help me?
The BI is 3.5 version
Best rgds!

the system tip of the error as below:
Object 'ATTRIBCHANEVEN_485MDFX3NYUF8PKGN9RSFATRD' (RSPV) of type 'Process Variants' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name 'ATTRIBCHANEVEN_485MDFX3NYUF8PKGN9RSFATRD' (in transport request RSPV) of type 'Process Variants' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System response
The object was not taken into account in the next stage of processing.

Interview questions in process chain

hi
cany any one send me possible interview questions in process chain and errors with answer.
thanks in advance
pradeep

Hi Pradeep
1.Procedure for repeat delta?
You need to make the request status to Red in monitor screen and then delete it from ODS/Cube. Then when you open infopackage again, system will prompt you for repeat delta.
also.....
Goto RSA7->F2->Update Mode--->Delta Repetation
Delta repeation is done based on type of upload you are carrying on.
1. if you are loading masterdata then most of the time you will change the QM status to red and then repeat the delta for the repeat of delta. the delta is allowed only if you make the changes.
and some times you need to do the RnD if the repeat of delta is not allowed even after the qm status id made to red. here you have to change the QM status to red.
If this is not the case, the source system and therefore also the extractor, have not yet received any information regarding the last delta and you must set the request to GREEN in the monitor using a QM action.
The system then requests a delta again since the last delta request has not yet occurred for the extractor.
Afterwards, you must reset the old request that you previously set to GREEN to RED since it was incorrect and it would otherwise be requested as a data target by an ODS.
Caution: If the termianted request was a REPEAT request itself, always set this to RED so that the system tries to carry out a repeat again.
To determine whether a delta or a repeat are to be requested, the system ONLY uses the status of the monitor.
It is irrelevant whether the request is updated in a data target somewhere.
When activating requests in an ODS, the system checks delta repeat requests for completeness and the correct sequence.
Each green delta/repeat request in the monitor that came from the same DataSource/source system combination must be updated in the ODS before activation, which means that in this case, you must set them back to RED in the monitor using a QM action when using the solution described above.
If the source of the data is a DataMart, it is not just the DELTARNR field that is relevant (in the roosprmsc table in the system in which the source DataMart is, which is usually your BW system since it is a Myself extraction in this case), rather the status of the request tabstrip control is relevant as well.
Therefore, after the last delta request has terminated, go to the administration of your data source and check whether the DataMart indicator is set for the request that you wanted to update last.
If this is NOT the case, you must NOT request a repeat since the system would also retransfer the data of the last delta but one.
This means, you must NOT start a delta InfoPackage which then would request a repeat because the monitor is still RED. For information about how to correct this problem, refer to the following section.
For more information about this, see also Note 873401.
Proceed as follows:
Delete the rest of this request from ALL updated data targets, set the terminated request to GREEN IN THE MONITOR and request a new DELTA.
Only if the DataMart indicator is set does the system carry out a repeat correctly and transfers only this data again.
This means, that only in this case can you leave the monitor status as it is and restart the delta InfoPackage. Then this creates a repeat request
In addition, you can generally also reset the DATAMART indicator and then work using a delta request after you have set the incorrect request to GREEN in the monitor.
Simply start the delta InfoPackage after you have reset the DATAMART indicator AND after you have set the last request that was terminated to GREEN in the monitor.
After the delta request has been carried out successfully, remember to reset the old incorrect request to RED since otherwise the problems mentioned above will occur when you activate the data in a target ODS.
What is process chain and how you used it?
A) Process chains are tool available in BW for Automation of upload of master data and transaction data while taking care of dependency between each processes.
B) In one of our scenario we wanted to upload wholesale price infoobject which will have wholesale price for all the material. Then we wanted to load transaction data. While loading transaction data to populate wholesale price, there was a look up in the update rule on this InfoObject masterdata table. This dependency of first uploading masterdata and then uploading transaction data was done through the process chain.
What is process chain and how you used it?
A) We have used process chains to automate the delta loading process. Once you are finished with your design and testing you can automate the processes listed in RSPC. I have a real time example in the attachment.
for more detail
Collecting Process Chain Statistics
/thread/235805 [original link is broken]
Advice regarding process chains
creation of process chains
Message was edited by:
Kalpana M

Where will I specify process chain and query time statistics to be loaded .

I am on BI 7.0. I see on my system, BI Statistics Technical Content has been installed because when I run
RSDDSTAT transaction under Info Provides I see cubes such as 0TCT_C01, oTC_C02, oTCT_C03, oTCT_MC01, 0TCT_VC01..
I also see process chains installed on my system such as oTCT_C2_INIT_P01, oTCT_C2_DELTA_P01.
I see various RSDDSTAT* tables being populated on my system as well.
My questions are:
1.     How does data gets populated in 0TCT_C01, C02 etc? Is it by scheduling TC process chains or there are other means?
2.      Where does one specify what kind of statistics will be copied from RSDDSTAT* tables. My IT lead tells me that process chain statistics are not being collected. I also thing query times are not being populated in 0TCT tables. Where can I specify what should be loaded in these cubes.
3.     Does ST03N transaction display data from 2.
THANKS A LOT.

Hi,
1.     How does data gets populated in 0TCT_C01, C02 etc? Is it by scheduling TC process chains or there are other means?
You can find the DataSource in RSA1. For example, 0TCT_C01 is updated from 0TCT_DS01. And you need to schedule process chain 0TCT_C0_DELTA_P01 for query statistics and 0TCT_C2_DELTA_P01 for data load statistics on a regular basis. Of course, as they are delta chains, you need to first run initializaiton chains for just one time before scheduling delta chains. The initialization chains are 0TCT_C0_INIT_P01 and 0TCT_C2_INIT_P01.
2.      Where does one specify what kind of statistics will be copied from RSDDSTAT* tables. My IT lead tells me that process chain statistics are not being collected. I also thing query times are not being populated in 0TCT tables. Where can I specify what should be loaded in these cubes.
As I know, the statistics data are first stored in RSDDSTAT* tables. For example, query data are stored in RSDDSTAT_OLAP. And the data are loaded to corresponding cubes when you executing InfoPackages.
You can refer to this link and search "Recording BI Statistics" in this page:
http://help.sap.com/saphelp_nw70/helpdata/en/44/3521c7bae848a1e10000000a114a6b/content.htm
3.     Does ST03N transaction display data from 2.
Yes. If BI Statistics content are not activate you would be unable to view statistics data in ST03N.
Let us know if you have other questions.
Regards,
Frank

Why process chains for BI statistics Technical Content are not showing in 0

I am looking into 0TCT_MC21 which shows process statistics from 0TCT_C21 and 0TC_VC21.
I know process chains such as 0TCT_C2_DELTA_PO1, 0TCT_C2_INIT_PO1 have been run, yet
They do not show in 0TCT_MC21 which included real time data (via virtual cube) as well as
Collected data 0TCT_C21u2026
Do I have to specify somewhere on which process chains statistics are to be collected, if yes, how??
Thanks.

Hi,
Have you checked this existing thread:
/message/3214515#3214515 [original link is broken]
Regards,
Lee

Error while collecting the process chain in a transport request

Hi Gurus,
I am getting an error while collecting my process chain in a tranpsort request.I have to transport the request from DEV to QA system.
When in RSA1--->transport connection i drag & drop the chain from left to right side pane then the Error occurs.
1.Object 'REQUDELZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPV) of type 'Process Variants' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPT) of type 'Process Chain Starter' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
2.Object 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPT) of type 'Process Chain Starter' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'REQUDEL ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPV) of type 'Process Variants' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
From one of the threads:
(https://forums.sdn.sap.com/click.jspasearchID=10081153&messageID=4623856)
i though it was the problem of patch level sap note(966131).
Accordingly i tried collecting process chain in the request where the patch level is high(24).But same error is seen.
I have activated chain again & then tried collecting the request i the process chain.But did not solve the error.
I have to collect Process chain in a transport request.Can you help me out to solve the problem?
Thanks in advance!
Regards,
Pallavi

Hi,
take a look:
Data Warehousing
"Errors occurred during post-handling RS_AFTER_IMPORT for MPRO L "
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
Try to set the Process Chain Start to Immediate(background jobs) in the schedule, because this will trigger the process chain once tranported and may cause similar errors.
Regards
Andreas

Re: Statistics Query for Total runtimes for Process Chain incorrect

Hi Guys,
I am building a Query for Total runtimes for Process Chain Statistics. I used the Cube 0TCT_MC21 for Query - 0TCT_MC21_Q0101.
I dragged in Keyfigure section - startdate, end date, Start time are all correct and fine but the End time (0TCTENDTIM) is coming incorrect. Is something else i should use to get the End time?
Please let me know if any suggestions?
Regards

Just check if the end times are in GMT ?? usually happens with timestamps....

BI admin cockpit for process chains

Hi
Currently we are monitoring process chains(Daily data loads) on a daily basis ,Business users want the statstics of the process chains to be implemented in cockpits via BI admin cockpit( BI 7 version) .can some one tell how to implement BI admin cockpit for process chains.
If some one has some specific documents can you please mail then to my email: [email protected]
Thanks
Bhavana

Hi,
You need to install Business Content
Front End and OLAP Statistics (Aggregated) ( 0TCT_C01, 0TCT_VC01)
0TCT_C01
InfoCube 0TCT_C01 is a standard InfoCube that contains front end and query runtime statistics (aggregated).
This InfoCube is used for monitors that display all the aggregated values of front end and query runtime for BI applications, BI application objects, and InfoProviders on the portal.
0TCT_VC01
InfoCube 0TCT_VC01 is a Virtual Provider that contains front end and query runtime statistics (aggregated).
This InfoCube is used for monitors that display all the aggregated values of front end and query runtime for BI applications, BI application objects, and InfoProviders on the portal.
Front End and OLAP Statistics (Details) (0TCT_C02, 0TCT_VC02)
0TCT_C02
InfoCube 0TCT_C02 is a standard InfoCube that contains detail values for front end and query runtime statistics.
This InfoCube is used for monitors that display detail values for the query runtime object.
0TCT_VC02
InfoCube 0TCT_VC02 is a Virtual Provider that contains front end and query runtime statistics (details).
Data Manager Statistics (Details) (0TCT_C03, 0TCT_VC03)
0TCT_C03
InfoCube 0TCT_C03 is a standard InfoCube that contains data manager statistics (details).
This InfoCube is used for monitors that display all the detail values of data manager statistics for the query runtime object on the portal.
0TCT_VC03
InfoCube 0TCT_VC03 is a Virtual Provider that contains data manager statistics (details).
This InfoCube is used for monitors that display all the detail values of data manager statistics for the query runtime object on the portal.
DTP Statistics (0TCT_C22, 0TCT_VC22)
0TCT_C22
The InfoCube 0TCT_C22 is a Standard InfoCube that contains statistics for data transfer processes that are executed individually or in process chains.
This InfoCube is used for all the monitors that display the DTP statistics on the portal.
0TCT_VC22
The InfoCube 0TCT_VC22 is a Virtual Provider that contains statistics for data transfer processes that are executed individually or in process chains.
This InfoCube is used for all the monitors that display the DTP statistics on the portal.
InfoPackage Statistics (0TCT_C23, 0TCT_VC23)
0TCT_VC23
The InfoCube 0TCT_VC23 is a Virtual Provider that contains InfoPackage statistics or detailed information about the InfoPackage that are executed individually or in process chains.
0TCT_C23
The InfoCube 0TCT_C23 is a Standard InfoCube that contains InfoPackage statistics or detailed information about InfoPackages that are executed individually or within a process chain.
Process Statistics (0TCT_VC21, 0TCT_C21)
0TCT_VC21
The InfoCube 0TCT_VC21 is a Virtual Provider that contains process chain statistics or detailed information about process chains and process types that are successfully executed.
This InfoCube is used for all the monitors that display detailed information about process chain statistics and process statistics on the portal.
0TCT_C21
The InfoCube 0TCT_C21 is a Standard InfoCube that contains process statistics or details of processes that are executed individually or in process chains.
This InfoCube is used for monitors that display all the process runtimes on the portal.
Process Status (0TCT_VC12)
The InfoCube 0TCT_VC12 is a Virtual Provider that specifies the status of the process chain and detailed information about the process status.
BI Object Request Status (0TCT_VC11)
The InfoCube 0TCT_VC11 is a Virtual Provider that provides detailed information about requests in all the Data Targets and Master Data in characteristics.
Content Master Data
The process chain 0TCT_MD_C_FULL_P01 is used to load the content master data.
(e.g: Process Chain, Process Status, Web template, Process variant, Web item)
System Master Data
The process chain 0TCT_MD_S_FULL_P01 is used to load system master data.
e.g:BW Object type
Data Load Statistics Delta
The process chain 0TCT_C2_DELTA_P01 is used to load delta data for data load statistics.
The following processes are included in the process chain:
Process                         Target
0TCT_DS22_DELTA_DATAMART (B71)               DTP Statistics [0TCT_C22]
0TCT_DS23_DELTA_DATAMART (B71)              Info Package Statistics [0TCT_C23]
0TCT_DS21_DELTA_DATAMART (B71)              Process Statistics [0TCT_C21]
Query Runtime Statistics Delta
The process chain 0TCT_C0_DELTA_P01 is used to load delta data for query runtime statistics.
The following processes are included in the process chain:
Process                                   Target
0TCT_DS01_DELTA_DATAMART               Front end and OLAP statistics (aggregated) [ 0TCT_C01]
0TCT_DS02_DELTA_DATAMART             Front end and OLAP statistics (details) [0TCT_C02]
0TCT_DS03_DELTA_DATAMART              Data manager statistics (details) [0TCT_C03]

DB statistics - Use of 'Construct Database Statistics ' in process chain

Hello,
I would like to know the differences (or is it complementar ?) between:
- using Business content Statistics cubes + Tools / BW statistics for infoproviders
- variant 'Construct Database Statistics' that can be used in process chains
Have the 2 techniques to be used together ?
Thanks in advance,
Regards

Hi Thomas,
Statistics should get loaded in the Business content Statistics cubes .........now by using the process type 'Construct Database Statistics' we can automate the process............actually ...........The DB Statistics options for the InfoCube allow to collect current DB statistics about the tables associated with the InfoCube............the collection of statistics can be automated.........
Regards,
Debjani........

Error while activating BI statistics Process Chain

Hi,
I have faced the problem below. Please advise.
I am doing BI content activation for BI admin cockpit, from SPRO -- Activation of BI content of BI admin cockpit , i ran the activation but it got failed. The error message says:
DataSource 0TCTBWOBJCT_ATTR from source system BWQCLNT500 could not be activated
This error is coming for data sources :0TCTPRCSVAR_ATTR, 0TCTBWOBJCT_TEXT, 0TCTPRCSVAR_TEXT and 0TCTBWOBJCT_ATTR.
I did not able to find these info packages for this data spurces:
0PAK_8K20VQGEBZRQXUE2PKWS90ZO8
0PAK_934GEKKIBBDKPVMVDJHVNPIMV
0PAK_99MQNPZISKNSNWKT9HF2CWPLK
0PAK_BFYU3MMMU2T2WOI50MXHCEH07
Due to this data sources iam geting problem inmy process chain..
PLease help .Pts wil be assigned.
Thanks and Regards.
T

hi
go to table RSLDPIOSH enter the infopackage technical name you have mentionned.
take note of the OLTPSOURCE name
then go to rsds replicate and activate.
After that take the technical names of the process chains go to business content installation and reactivate theses chains (with option only necessary objects)
This will solve you issue
The reason of your error is the following, some master data datasources from the bi statistics business content is delivered in 3.x and some other with 7 therefore you have a mix up with the dataflows.
bye
Boujema

Statistics technical content activation issue with MD process chain in BI7

Hi,
Let me give you history of the issue first.
I had to activate the Statistics in BI7. I followed the SAP Note 965386 and activated the Technical Content.
Faced activation issues in MD process chain, Content Master Data-0TCT_MD_C_FULL_P01. It dint get activated, Followed the SAP note 1065919, which asked me to remove the below process from RSPC and activate it.
Load data- Process Variant Attribute and
Load data- Process Variant Text.
I did the same and it got activated after removing them.
Issue is. Later knew that manually activating the Process chain from Content would have activated those Infopackages aswell.
Now how should I get those processes into the chain and activate? Based on your suggestions, I can let you know what all I have been trying to fix it?
Relying on you for solution.
Thanks
Pavan

Thank You Neethika,
I have this issue solved. I replicated the data sources, activated those infoPackages manually and then added those variants into the process chain manually. So my MD chain now has all the necessary process.
Now i need to schedule them and see if it runs with out any errors. I will keep this thread open till i run it to take your help if i get any errors while running them.
Thanks
Pavan

When to use the "construct database statistics" process chain' item

Hello, everybody.
Information 1:
In our BW system we have a job from DBA guys that build statistcs for the entire database. This job runs every day in the dawn.
Information 2:
In several process chain flows, we use the item "Construct Database Statistics" to update the statistics after cube upload.
Information 3:
I checked the log from both jobs and found several tables analyzed in first and second cases.
The question:
Is this step inside the process chain unnecessary? Exist any situation when this step is useful?
Thanks in advance,
Henrique Teodoro

Hi.
I found one advice about this issue in the follow thread:
/message/3460818#3460818 [original link is broken]
Regards,
Henrique Teodoro

Collection in source system ended-Process chain error

Hi friends,
I have got a PC which failed due to error : Collection in source system ended.
My flow of PC is .
start--
       --Load IP 1
      ---Load IP2
      _--load Ip 3
Load IP4
      ---Load Ip 5.
I got this error at IP2 and so my pc fail .
can i manually upload this IP2 and make the process chain OK?
what are the steps involved in rectifying this?
regards,
siddartha

First try to find out the reason for the load failure. Once you fix this, do a manual run of the infopackage and when successful you can continue with the rest of process chain.
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.

Collecting Process Chain Statistics

Similar Messages

Maybe you are looking for