Process Chain statistics (new stats in 2004s)

Hi,
We have activated and are loading all stats (new ones) for 2004s. We are checking the stats through the portal. We have many stats showing in the default web templates used in the portal to display stats. Process Chain stats are the only ones showing no data...which can't be true because we have only been loading with process chains.
Where do you "activate" stats for Process chains themselves? I am aware of RSPC_API_CHAIN_GET_STATUS, but it appears with 2004s, delivered is a process chain statistics?
Thanks, Mark.

For data-load statistics of process chains and processes:
use 0TCT_C21, 0TCT_VC21 and 0TCT_MC21
For more Insights -
The new InfoProviders are:
For more highly aggregated query-runtime statistics:
0TCT_C01, 0TCT_VC01 and 0TCT_MC01
These replace InfoCube 0BWTC_C02.
For more detailed query-runtime statistics:
0TCT_C02, 0TCT_VC02 and 0TCT_MC02
These replace InfoCube 0BWTC_C02.
For data manager statistics:
0TCT_C03, 0TCT_VC03 and 0TCT_MC03
These replace InfoCube 0BWTC_C03.
For data-load statistics of process chains and processes:
0TCT_C21, 0TCT_VC21 and 0TCT_MC21
For data-load statistics of data transfer processes:
0TCT_C22, 0TCT_VC22 and 0TCT_MC22
For data-load statistics of InfoPackages:
0TCT_C23, 0TCT_VC23 and 0TCT_MC23
These deliver essentially the same information as InfoCube 0BWTC_C05 but they use the new InfoObjects. The remaining new InfoProviders also use the new InfoObjects.
For the current data-load status of process chains and processes:
0TCT_VC11 and 0TCT_MC11
For the current status of requests loaded to InfoProviders, InfoObjects that have been updated flexibly, and PSA tables:
0TCT_VC11 and 0TCT_MC11
Hope it Helps
Chetan
@CP..

Similar Messages

Collecting Process Chain Statistics

Hi anyone,
I'm looking to write some ABAP Code to collect Process Chain Statistics so they can be coherently evaluated and not by looking at the process chains individually. I'll be looking to identify variances in # of records, load times, etc. so I can send out alerts.
I've been able to collect a lot of Process Chain Process information so far using existing API and FM calls. I'm able to get down to the Process Log Levels so far, but I'm trying to think how to go about collecting the actual key figures I need.
<b>I'm looking to capture things like the following:</b>
- Statistics of each process chain and related process chain process like I need to know that my ODS activation started @ 10am actived 10,000 records and ended at 10:01 am. (how long it took).
- I need to know that my data load loaded 1,000 records and how long it took.
- I need to know that my rollup compressed x number of records and took how long.. Etc, Etc, Etc.
I know the BI Administration Cockpit in 2004s might provide some/most of this information, but it isn't an option right now.
The way I see it I really only 1 option with a 2nd potential option:
1. Most likely option is to write a program to go out and collect the statistics for all the processes executing the program on a scheduled basis.
2. Modify/Copy the process chain process classes to somehow output the statistics I need. No idea how I would do this yet.
So again I am currently down to the process level logs and just don't know how to collect the statistical key figures I need like how many records were loaded, compressed, activated, etc... I'm thinking of somehow parsing the logs to get the key figures, but that seems like it would be difficult.
Anyone have any suggestions or ideas how to collect this information so I can report on it?
I posted this here because I thought the bw abappers would frequent this area. Also, If anyone thinks this would be better suited in another forum then please suggest.
Thanks,
Ken Murray

Do you subscribe to BWexpert?
There is an article a person posted specifically on this...
<a href="http://www.bwexpertonline.com/">BE Expert</a>
"Identify Failed Data Loads with This Check Tool"
Thanks.
/smw
Message was edited by: Steve Wilson

Process Chain Statistics

hi,
I am workign on BI7.0/SP09.
There are many process chains running in my system daily, but not able to capture the process chain statistics (Cube is 0TCT_C22). When ran datasource 0TCT_DS21 in t-code RSA3, it shows no records extracted. Now unlike Infoprovider, queries and Web template, there is no option to start the statictics of process chain. For others, we can start the statictics via menu --> tools --> Setting for BI statistics.
Also I checked the table RSPCLOGCHAIN, there are many records in it and also field ANALYZED_STATUS is properly filled with values.
Now what to do? Please advice ASAP as struggling with this since long time.
Regards
PS

Process Chain Statistics Tables:
- RSPCLOGCHAIN, RSPCPROCESSLOG
<b>Data Flow</b>
     0TCT_DS21
0TCT_C21      0TCT_VC21
     0TCT_MC21
Hope it Helps
Chetan
@CP..

Urgent Issue - Copy DTP and Process Chains in New Client Instance

We have created new client Instance ( CLNT 510 ) based on our present client ( CLNT 500 ).
We have all the process changes, application components from source system CLNT 500 and data ( both for master and transaction data ) in place for the CLNT 500.
Now we need to use the CLNT 510 for our futher development. RFC connection has been established.
Just want to know, do we need to create all the Application component trasfer , Transformation, DTP , Infopackages , Process chains again for the CLNT 510 data.
please help.
Thanks and Kind Regards,
Pratap Gade.

Hello Jr Roberto,
Hello Jr Roberto,
We have company implementing mutiple SAP Implementations in different countries.
Client for BW Dev is 400.
Source system for Client BWD :
ECC Client ERP Dev - 500 ( for Holland Implementation )
ECC Client EPR Dev - 510 ( for German Implementation - Instance of ECC 500)
We are completed with the Client 500 implementation.
We are starting the german implementation and they have created a intance of Holland ECC Dev client 500 for german implementation with german data.
Now they have setup 2 rfc connection in BWD 400.
Also finally when they move to QAS client they are going to integrate the data of the both countries into one client.
Presenlty I need to use ECC client 510 client for our german development.
We have around 40 SAP BI reports in our first implementation. and around 10 in our second implementation.
Just want to know, what are issues to be considered in loading master data ( will it overwrite the master data from the client 500, if i extract the master data from client 510 )...and all the other issues like can I copy all the process chains...etc from client ECC 500 to ECC 510, without creating all transformation, DTP , Infopackages to load all the master from client 510 again.
I need a broad understand on how to go about the development ...starting with Application Components transfer from source system Client 510 ....to report development. ( if possible using the already created objects....infopackages , DTP etc..)
your help would be really appricated Mr Roberto.
Thanks and Kind Regards,
Shekar.

Authorization for Process Chains in BW 3.5 (2004)

Hi all,
I wanted to know if there is any way to limit actions on process chains. I would like to give some users display only access to process chains. Is that possible?
Thanks

Hi,
In your system go to
'Transport Connection' tool-->
Click on 'Object Changeability' pushbutton-->
And for Object types RSPC and ISIP make "changeable/Not Changable" .
Note: This will work only if your system is lockect aganist the changes as it is normally in Production.
Also check the below links:
1) Authorisation for process chains
2) Authorization Object for Process Chain
3)http://help.sap.com/saphelp_nw2004s/helpdata/en/35/c7e442e3c15704e10000000a155106/frameset.htm
4) http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6859e07211d2acb80000e829fbfe/frameset.htm

Where will I specify process chain and query time statistics to be loaded .

I am on BI 7.0. I see on my system, BI Statistics Technical Content has been installed because when I run
RSDDSTAT transaction under Info Provides I see cubes such as 0TCT_C01, oTC_C02, oTCT_C03, oTCT_MC01, 0TCT_VC01..
I also see process chains installed on my system such as oTCT_C2_INIT_P01, oTCT_C2_DELTA_P01.
I see various RSDDSTAT* tables being populated on my system as well.
My questions are:
1.     How does data gets populated in 0TCT_C01, C02 etc? Is it by scheduling TC process chains or there are other means?
2.      Where does one specify what kind of statistics will be copied from RSDDSTAT* tables. My IT lead tells me that process chain statistics are not being collected. I also thing query times are not being populated in 0TCT tables. Where can I specify what should be loaded in these cubes.
3.     Does ST03N transaction display data from 2.
THANKS A LOT.

Hi,
1.     How does data gets populated in 0TCT_C01, C02 etc? Is it by scheduling TC process chains or there are other means?
You can find the DataSource in RSA1. For example, 0TCT_C01 is updated from 0TCT_DS01. And you need to schedule process chain 0TCT_C0_DELTA_P01 for query statistics and 0TCT_C2_DELTA_P01 for data load statistics on a regular basis. Of course, as they are delta chains, you need to first run initializaiton chains for just one time before scheduling delta chains. The initialization chains are 0TCT_C0_INIT_P01 and 0TCT_C2_INIT_P01.
2.      Where does one specify what kind of statistics will be copied from RSDDSTAT* tables. My IT lead tells me that process chain statistics are not being collected. I also thing query times are not being populated in 0TCT tables. Where can I specify what should be loaded in these cubes.
As I know, the statistics data are first stored in RSDDSTAT* tables. For example, query data are stored in RSDDSTAT_OLAP. And the data are loaded to corresponding cubes when you executing InfoPackages.
You can refer to this link and search "Recording BI Statistics" in this page:
http://help.sap.com/saphelp_nw70/helpdata/en/44/3521c7bae848a1e10000000a114a6b/content.htm
3.     Does ST03N transaction display data from 2.
Yes. If BI Statistics content are not activate you would be unable to view statistics data in ST03N.
Let us know if you have other questions.
Regards,
Frank

Why process chains for BI statistics Technical Content are not showing in 0

I am looking into 0TCT_MC21 which shows process statistics from 0TCT_C21 and 0TC_VC21.
I know process chains such as 0TCT_C2_DELTA_PO1, 0TCT_C2_INIT_PO1 have been run, yet
They do not show in 0TCT_MC21 which included real time data (via virtual cube) as well as
Collected data 0TCT_C21u2026
Do I have to specify somewhere on which process chains statistics are to be collected, if yes, how??
Thanks.

Hi,
Have you checked this existing thread:
/message/3214515#3214515 [original link is broken]
Regards,
Lee

Re: Statistics Query for Total runtimes for Process Chain incorrect

Hi Guys,
I am building a Query for Total runtimes for Process Chain Statistics. I used the Cube 0TCT_MC21 for Query - 0TCT_MC21_Q0101.
I dragged in Keyfigure section - startdate, end date, Start time are all correct and fine but the End time (0TCTENDTIM) is coming incorrect. Is something else i should use to get the End time?
Please let me know if any suggestions?
Regards

Just check if the end times are in GMT ?? usually happens with timestamps....

Interview questions in process chain

hi
cany any one send me possible interview questions in process chain and errors with answer.
thanks in advance
pradeep

Hi Pradeep
1.Procedure for repeat delta?
You need to make the request status to Red in monitor screen and then delete it from ODS/Cube. Then when you open infopackage again, system will prompt you for repeat delta.
also.....
Goto RSA7->F2->Update Mode--->Delta Repetation
Delta repeation is done based on type of upload you are carrying on.
1. if you are loading masterdata then most of the time you will change the QM status to red and then repeat the delta for the repeat of delta. the delta is allowed only if you make the changes.
and some times you need to do the RnD if the repeat of delta is not allowed even after the qm status id made to red. here you have to change the QM status to red.
If this is not the case, the source system and therefore also the extractor, have not yet received any information regarding the last delta and you must set the request to GREEN in the monitor using a QM action.
The system then requests a delta again since the last delta request has not yet occurred for the extractor.
Afterwards, you must reset the old request that you previously set to GREEN to RED since it was incorrect and it would otherwise be requested as a data target by an ODS.
Caution: If the termianted request was a REPEAT request itself, always set this to RED so that the system tries to carry out a repeat again.
To determine whether a delta or a repeat are to be requested, the system ONLY uses the status of the monitor.
It is irrelevant whether the request is updated in a data target somewhere.
When activating requests in an ODS, the system checks delta repeat requests for completeness and the correct sequence.
Each green delta/repeat request in the monitor that came from the same DataSource/source system combination must be updated in the ODS before activation, which means that in this case, you must set them back to RED in the monitor using a QM action when using the solution described above.
If the source of the data is a DataMart, it is not just the DELTARNR field that is relevant (in the roosprmsc table in the system in which the source DataMart is, which is usually your BW system since it is a Myself extraction in this case), rather the status of the request tabstrip control is relevant as well.
Therefore, after the last delta request has terminated, go to the administration of your data source and check whether the DataMart indicator is set for the request that you wanted to update last.
If this is NOT the case, you must NOT request a repeat since the system would also retransfer the data of the last delta but one.
This means, you must NOT start a delta InfoPackage which then would request a repeat because the monitor is still RED. For information about how to correct this problem, refer to the following section.
For more information about this, see also Note 873401.
Proceed as follows:
Delete the rest of this request from ALL updated data targets, set the terminated request to GREEN IN THE MONITOR and request a new DELTA.
Only if the DataMart indicator is set does the system carry out a repeat correctly and transfers only this data again.
This means, that only in this case can you leave the monitor status as it is and restart the delta InfoPackage. Then this creates a repeat request
In addition, you can generally also reset the DATAMART indicator and then work using a delta request after you have set the incorrect request to GREEN in the monitor.
Simply start the delta InfoPackage after you have reset the DATAMART indicator AND after you have set the last request that was terminated to GREEN in the monitor.
After the delta request has been carried out successfully, remember to reset the old incorrect request to RED since otherwise the problems mentioned above will occur when you activate the data in a target ODS.
What is process chain and how you used it?
A) Process chains are tool available in BW for Automation of upload of master data and transaction data while taking care of dependency between each processes.
B) In one of our scenario we wanted to upload wholesale price infoobject which will have wholesale price for all the material. Then we wanted to load transaction data. While loading transaction data to populate wholesale price, there was a look up in the update rule on this InfoObject masterdata table. This dependency of first uploading masterdata and then uploading transaction data was done through the process chain.
What is process chain and how you used it?
A) We have used process chains to automate the delta loading process. Once you are finished with your design and testing you can automate the processes listed in RSPC. I have a real time example in the attachment.
for more detail
Collecting Process Chain Statistics
/thread/235805 [original link is broken]
Advice regarding process chains
creation of process chains
Message was edited by:
Kalpana M

BI admin cockpit for process chains

Hi
Currently we are monitoring process chains(Daily data loads) on a daily basis ,Business users want the statstics of the process chains to be implemented in cockpits via BI admin cockpit( BI 7 version) .can some one tell how to implement BI admin cockpit for process chains.
If some one has some specific documents can you please mail then to my email: [email protected]
Thanks
Bhavana

Hi,
You need to install Business Content
Front End and OLAP Statistics (Aggregated) ( 0TCT_C01, 0TCT_VC01)
0TCT_C01
InfoCube 0TCT_C01 is a standard InfoCube that contains front end and query runtime statistics (aggregated).
This InfoCube is used for monitors that display all the aggregated values of front end and query runtime for BI applications, BI application objects, and InfoProviders on the portal.
0TCT_VC01
InfoCube 0TCT_VC01 is a Virtual Provider that contains front end and query runtime statistics (aggregated).
This InfoCube is used for monitors that display all the aggregated values of front end and query runtime for BI applications, BI application objects, and InfoProviders on the portal.
Front End and OLAP Statistics (Details) (0TCT_C02, 0TCT_VC02)
0TCT_C02
InfoCube 0TCT_C02 is a standard InfoCube that contains detail values for front end and query runtime statistics.
This InfoCube is used for monitors that display detail values for the query runtime object.
0TCT_VC02
InfoCube 0TCT_VC02 is a Virtual Provider that contains front end and query runtime statistics (details).
Data Manager Statistics (Details) (0TCT_C03, 0TCT_VC03)
0TCT_C03
InfoCube 0TCT_C03 is a standard InfoCube that contains data manager statistics (details).
This InfoCube is used for monitors that display all the detail values of data manager statistics for the query runtime object on the portal.
0TCT_VC03
InfoCube 0TCT_VC03 is a Virtual Provider that contains data manager statistics (details).
This InfoCube is used for monitors that display all the detail values of data manager statistics for the query runtime object on the portal.
DTP Statistics (0TCT_C22, 0TCT_VC22)
0TCT_C22
The InfoCube 0TCT_C22 is a Standard InfoCube that contains statistics for data transfer processes that are executed individually or in process chains.
This InfoCube is used for all the monitors that display the DTP statistics on the portal.
0TCT_VC22
The InfoCube 0TCT_VC22 is a Virtual Provider that contains statistics for data transfer processes that are executed individually or in process chains.
This InfoCube is used for all the monitors that display the DTP statistics on the portal.
InfoPackage Statistics (0TCT_C23, 0TCT_VC23)
0TCT_VC23
The InfoCube 0TCT_VC23 is a Virtual Provider that contains InfoPackage statistics or detailed information about the InfoPackage that are executed individually or in process chains.
0TCT_C23
The InfoCube 0TCT_C23 is a Standard InfoCube that contains InfoPackage statistics or detailed information about InfoPackages that are executed individually or within a process chain.
Process Statistics (0TCT_VC21, 0TCT_C21)
0TCT_VC21
The InfoCube 0TCT_VC21 is a Virtual Provider that contains process chain statistics or detailed information about process chains and process types that are successfully executed.
This InfoCube is used for all the monitors that display detailed information about process chain statistics and process statistics on the portal.
0TCT_C21
The InfoCube 0TCT_C21 is a Standard InfoCube that contains process statistics or details of processes that are executed individually or in process chains.
This InfoCube is used for monitors that display all the process runtimes on the portal.
Process Status (0TCT_VC12)
The InfoCube 0TCT_VC12 is a Virtual Provider that specifies the status of the process chain and detailed information about the process status.
BI Object Request Status (0TCT_VC11)
The InfoCube 0TCT_VC11 is a Virtual Provider that provides detailed information about requests in all the Data Targets and Master Data in characteristics.
Content Master Data
The process chain 0TCT_MD_C_FULL_P01 is used to load the content master data.
(e.g: Process Chain, Process Status, Web template, Process variant, Web item)
System Master Data
The process chain 0TCT_MD_S_FULL_P01 is used to load system master data.
e.g:BW Object type
Data Load Statistics Delta
The process chain 0TCT_C2_DELTA_P01 is used to load delta data for data load statistics.
The following processes are included in the process chain:
Process                         Target
0TCT_DS22_DELTA_DATAMART (B71)               DTP Statistics [0TCT_C22]
0TCT_DS23_DELTA_DATAMART (B71)              Info Package Statistics [0TCT_C23]
0TCT_DS21_DELTA_DATAMART (B71)              Process Statistics [0TCT_C21]
Query Runtime Statistics Delta
The process chain 0TCT_C0_DELTA_P01 is used to load delta data for query runtime statistics.
The following processes are included in the process chain:
Process                                   Target
0TCT_DS01_DELTA_DATAMART               Front end and OLAP statistics (aggregated) [ 0TCT_C01]
0TCT_DS02_DELTA_DATAMART             Front end and OLAP statistics (details) [0TCT_C02]
0TCT_DS03_DELTA_DATAMART              Data manager statistics (details) [0TCT_C03]

Dm package(process chain: /cpmb/load_infoprov_UI)

HI Friends,
i'm trying to load data from bw cube to bpc, using data manager package(based on process: /cpmb/load_infoprov_ui). Which allows user to selectively load data. With this DM package, succsfully loaded data for few combinations, but i failed later on upon using this. What i did, was for few combinations i changes filed list options like selecting all, or selecting few fields . Now i'm unable to successfully use this dm packge. Where as normal process chain based package working correctly(/cpmb/load_infoprovider). Do i need to select any mandatory fields in field list option while executing packge based on selections. Filed list means, i read text as " select attributes for which you want to get master data". Now this package not bringing any data to bpc.
Any observations on this pls.
thanks,
SELECTION=<Selections><Selection Type="Selection"><Attribute><ID>YSEMPOSIT</ID><Operator>3</Operator><LowValue>14140</LowValue><HighValue>14141</HighValue></Attribute></Selection><Selection Type="FieldList"><FieldID>YSEMPOSIT</FieldID></Sel
ection></Selections>
i select single field(ysemposit) in field list and given ysemposit range(14140-14141). above one is view package status screen.
For 2nd case,
SELECTION=<Selections><SelectionType="Selection"><Attribute><ID>YSEMPOSIT</ID><Operator>3</Operator><LowValue>14140</LowValue><HighValue>14141</HighValue></Attribute></Selection><Selection Type="FieldList"><FieldID>0CALMONTH</FieldID><Fiel
dID>0CFM_TR_CUR</FieldID><FieldID>0CHNGID</FieldID><FieldID>0CURRENCY</FieldID><FieldID>0CURTYPE</FieldID><FieldID>0DATAORIGIN</FieldID><FieldID>0FISCPER</FieldID><FieldID>0FISCPER3</FieldID><FieldID>0FISCVARNT</FieldID><FieldID>0FISCYEAR</
FieldID><FieldID>0OBJ_CURR</FieldID><FieldID>0PS_COARCUR</FieldID><FieldID>0RECORDTP</FieldID><FieldID>0REQUID</FieldID><FieldID>0VTYPE</FieldID><FieldID>YBUSLINE</FieldID><FieldID>YBUSPROD</FieldID><FieldID>YBUSPROD__YBRAND</FieldID><Field
ID>YBUSPROD__YPRODGROP</FieldID><FieldID>YBUSPROD__YSERVTYPE</FieldID><FieldID>YCCA_CAT</FieldID><FieldID>YCIRCLE</FieldID><FieldID>YCOMBCCOD</FieldID><FieldID>YCOMBCIR</FieldID><FieldID>YCOTELMNT</FieldID><FieldID>YCO_AREA</FieldID><FieldI
D>YCSTCENTR</FieldID><FieldID>YG_CWW001</FieldID><FieldID>YREGION</FieldID><FieldID>YSEMPOSIT</FieldID><FieldID>YTECHTYPE</FieldID><FieldID>YVERSION</FieldID><FieldID>Y_PCMODEL</FieldID></Selection></Selections>
i select choose all fields in field list and given ysemposit range(14140-14141).

Hi,
with the process chain you mentioned, just make sure al attributes are selected in the second tab of your selection screen. If an attribute is not selected, you cannot use it for your selection ... Also note that with this process chain the SELECTION statement in your transformaiton file will not work anymore ...
D

Process Chain in R3

Hi All,
I need some help of your expertise in process chain
Scenario is like this.
System Land Scape
Dev System --> Test System (Non Modifiable) --> Production
I created process chain for CIF in dev box. process chain is working fine. but when I transport it to test system I do not see process chain in active stat. as test system is not modifiable I can not activate process chain in test system. Also when I try to execute the process chain I get error message " Invalid call sequence for interfaces when recording changes". Also in test system all objects are changeble (RSA1)
Can anyone help me how to resolve this? BW component is updated till sevice pack 20.
Regards,
Harshil Desai
Edited by: Harshil K Desai on Aug 4, 2009 7:29 PM

Please see if you can activate the process chain using the function module RSPC_CHAIN_ACTIVATE_REMOTE

Steps to create Process Chain in Version 2004S SAP NetWeaver

Hi,
I have created a process chain in 3.5 version.Now i want to create a process chain in 2004s version.so what should be the steps to create this process chain.

Hi
1. Goto RSPC
2.By using create icon create process chain.
3.Now it will ask for process variant. Either assign already made or create new on.
4. Now save it.
5.Refresh the tree and u will find ur Procees chain in the list.
Hope it helps, if so then assign points.
Vinod.

BI 7.0 Stats - Is it supposed to install us the Standard Process Chain?

Hi All,
We understand that Virtual Cubes would obtain the real-time based on what is there in the basic cubes, underlying the Technical Content Multicubes.
We did install all the technical content. Is it supposed to install us the Standard Process Chain for BI Statistics as well to transfer the stats data into the Basic Cubes.?
If not, how do we setup the stats loads to the basic cubes easily....?
Thanks in advance.
Best Regards,
- Shashi

Hi,
When you install the BI 7.0 stats from teh BI content all the process chains related to it automatically gets installed. But you can see teh correct report only if the DB Stats is uptodate for all the info providers in your system. I mean to say that if all the dataloads to the cube is followed by the DB Stats process only then the coressponding Technical Stats cube gets the correct data. After which you can see teh correct report.
There is no need to create a process chain separately for them. Just you need to keep updating the DB stats for your info providers.
Navesh

DB statistics failed in Process Chains

Hi BI Experts,
We are maintaining 6 process chains in our system.
Today every job was running successfully.
But in every process chains, the DB STATISTICS are failed.When I check in the performance tab , it shows green.
So i could not solve this problem.
The log message is:
    The exception 'CX_SDB_ORA_PROGRAM_ERROR' was raised, but it was not caught
     anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_SDB_ORA_UPDATE_STATS=======CP' has to be
    terminated.
Please can anyone tell me the process.
Thanks in advance.
Regards
Anjali

Hi Anjali,
Check the OSS Note 998904 - Statistics check shows red or yellow traffic lights.
I am pasting the contents of the Note here:
Symptom
After an update statistics run, the check (in transaction RSRV or transaction RSA1--> Manage) continues to show yellow or red traffic lights.
Other terms
RSDU_ANALYZE, analyze, statistics, yellow traffic light, red traffic light, performance, RSRV, incorrect statistics, manage
Reason and Prerequisites
This problem is caused by a program error.
Solution
The check for current statistics on InfoCubes contains a static time query and as a result of this, statistics are incorrectly displayed as 'not current'. This is just a display problem. After an update statistics run, the statistics are actually up to date.
SAP NetWeaver 2004s BI
           Import Support Package 10 for SAP NetWeaver 2004s BI (BI Patch 10 or SAPKW70010) into your BI system. The Support Package is available once Note 914304 "SAPBINews BI 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
In urgent cases, you can implement the correction instructions.
You must first implement Notes 932065, 935140, 948389, 964580 and 969846, which provide information about transaction SNOTE. Otherwise, problems and syntax errors may occur when you deimplement some notes.
To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version".
Before you implement an advance correction (if one exists and you want to implement it), see Note 875986. It contains notes regarding the SAP Note Assistant. These notes prevent problems during the implementation.
Bye
Dinesh

Process Chain statistics (new stats in 2004s)

Similar Messages

Maybe you are looking for