Collection manager upgrade
Hi,
We have collection manager 3.7 upgraded from 3.6.
It complains:
2011-11-16 15:13:48,327 [main] WARN com.cisco.scmscm.db.DbInserter.RPT_SUR - initTypesArray - expected 16 columns in RPT_SUR, but found 15 - perhaps this table was created for a different SCE application release?
How can I update the table to handle the expected 16 column?
Thank you.
Hi Tomo,
thank you for pointing me to the right direction. After issuing:
~/cm/bin/cm invoke com.cisco.scmscm.adapters.jdbc.JDBCAdapter -updateDbObjects
~/cm/bin/cm invoke com.cisco.scmscm.adapters.jdbc.JDBCAdapter -upgradeSPAMTable
~/cm/bin/cm invoke com.cisco.scmscm.adapters.jdbc.JDBCAdapter -upgradeSURTable
~/cm/bin/cm invoke com.cisco.scmscm.adapters.jdbc.JDBCAdapter -upgradeLURTable
the db object were created.
Let me please ask one more question...when CM starts I get some warnings to the cm.log:
2011-11-18 09:23:26,672 [Thread-5] WARN com.cisco.scmscm.util.StreamGobbler - com.cisco.scmscm.adapters.CSVAdapter :STDERR>log4j:ERROR Could not connect to remote log4j server at [localhost]. We will try again later.
2011-11-18 09:23:31,639 [Thread-3] WARN com.cisco.scmscm.util.StreamGobbler - com.cisco.scmscm.adapters.topper.TAAdapter :STDERR>log4j:ERROR Could not connect to remote log4j server at [localhost]. We will try again later.
2011-11-18 09:23:33,422 [Thread-7] WARN com.cisco.scmscm.util.StreamGobbler - com.cisco.scmscm.adapters.jdbc.JDBCAdapter :STDERR>log4j:ERROR Could not connect to remote log4j server at [localhost]. We will try again later.
How can I verify/resolve this please?
Thank you.
Similar Messages
-
SAP Dispute & Collection Management
We need to implement SAP Dispute & Collection Management: we are working with a SAP R/3 Enterprise Release 4.70, and we dont want to upgrade.
The recommended architecture according to SAP documentation in this case should be a multisystem one: FI-AR on SAP R/3 Enterprise Release and SAP Dispute & Collection Management on SAP ECC 5.0.
We would like to know:
Which component to install in SAP ECC 5.0 system
Do this/these components need a separate licence or are they comprised in SAP ECC 5.0.?
Thank you
MarinaHi,
Please refer the following link:
http://www.sap.com/solutions/business-suite/erp/financials/featuresfunctions/fin_supply_chain_mgmt.epx
Please assign points as a way to say thanks.
Regards,
Hemanth -
Hi,
Has anyone encountered some problem on backing up the Cisco Collection Manager. We will be upgrading the firmware of our SCE8000 from 3.6.5 to 3.8.x, and need to upgrade also the Collection Manager. We are encountering the error below when backing up:
-bash-3.2$ locate sybback.sh
/opt/CM/scripts/sybback.sh
-bash-3.2$ /opt/CM/scripts/sybback.sh -d /home/jsoriano
/opt/CM/scripts/sybback.sh: line 19: ~sybase/SYBASE.sh: No such file or directory
Error - cannot import Sybase definitions - exiting
-bash-3.2$
Is there any exact procedure on backing up the system or databse of the Collection Manager.
Thanks,
BryanHi Brian,
It seems like the sybback.sh script is trying to use a file which cannot be found in your system. The file is
~sybase/SYBASE.sh.
I understand that you are using here a bundled distribution of CM (using Sybase DB). Is that correct? If so, can you try to locate SYBASE.sh file in the server? Perhaps the script is referring to a wrong location and that's why it's failing. It could also be a permission problem.
The procedure to backup the CM DB may depend on the type of DB being used. For external DB, you may need rely on the DB capabilities to backup.
In any case, a CM upgrade shouldn't normally need a DB backup. During the upgrade process the DB structures is upgarded and the data is adapted to the new structure. You can find the upgrade procedure to 3.8.x here:
http://www.cisco.com/en/US/docs/cable/serv_exch/serv_control/broadband_app/rel38x/cmug/Installing_the_Collection_Manager.html#wp1064529
As you can see, there is no mention of DB backup needed for the upgrade procedure. Also, take into account that an upgrade from 3.6.5 to 3.8.x cannot be done directly. To upgrade from Version 3.6.x or earlier, you must first upgrade to Version 3.7.x.
You can always backup your DB if you want, of course.
Regadrs -
Hello,
The main purpose of this BADI is to send fi-ar data to FSCM.
The BADI FDM_COLL_SEND_ITEMS is active, so When we create a customer in XD01, we are able to see that in Business Partner Tcode BP.
Our business requiremet is to create two additional fields to the worklist for Collection Management. So we have used the method COMPLETE_DATA which is available in BADI FDM_COLL_SEND_ITEMS and populated additional fields which are required by the business.
We have to execute BADI to get two additional columns in the Collections worklist, but If i execute the BADI, i am getting the message that "BAdI FDM_COLL_SEND_ITEMS is active". If i dont keep the BADI Active, i cant get the A/R data to FSCM.
Please let me know what are the Pros and Cons If i setup "FDM_COLL_SEND_ITEMS" as a background job in my current scenario to get AR-DATA into FSCM (OR) Should i have to definitely setup "FDM_COLL_SEND_ITEMS" as an Background Job.
Please advice me how to proceed.
Thanks
RajanikanthRajnikanth,
Did you extend the BAdi to have additional fields sent to collections? for the fields to be available in the worklist i think there are two other BAdi's to be created. if you have figured out let me know as we are doing the same adding a couple of fields from the old credit management of SAP (FI-AR)
Thanks
Vikram -
Unable to enter serial number for Master Collection CS6 Upgrade
I recently purchased a Master Collection CS6 upgrade (from 5.5). My CS6 serial number was correctly recognised but it said it couldn't find any software eligible for the upgrade despite Master Collection CS5.5 being installed on my PC (running Windows 7 Ultimate). The screen to enter the serial number of the eligible software doesn't have Master Collection CS5.5 in the drop-down, only CS5. Using that option with my CS5.5 serial number doesn't work. I got no response to a case opened on the support site.
In order to install the CS6 software, I then installed it as a trial version. I now get reminders that I only have x days to go but there is no option to enter my serial number. I assume it thinks I've got a trial version of Creative Cloud.
Adobe Support keep closing cases raised on the spurious grounds that I haven't responded. It is they that are not responding! Anyone able to help?
Thanks in anticipation.if the serial number has been used, you won't be able to use that serial and that's the only thing you purchased.
the installation files are free:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Error While creating Collection Management role
Hi
We did a client copy and Iam getting the error "Database error UDM_PR_HEAD UDM_COLL_BUPA 5" whenever I tried to create collection management roles.
Database error UDM_PR_HEAD UDM_COLL_BUPA 5
Message no. UDM_WORK_LIST010
Diagnosis
Database instruction UDM_PR_HEAD was not successful.
Procedure
If you can reproduce the error message, contact SAP Support.
Anyone knows anything about this error?
ThanksHi Ram,
sorry for the inconvenience, can you provide the collections management(ecc6.0) configuration document.
i am trying to learn that but i could not find any related document .
Thanks,
Ravi -
Error while creating Business Partner in Collections Management
Hello All,
I am trying to create Business partners for Customers in Collections Managment, specific to country Luxemburg. The error I am getting says that, 'Tax number category LU2 does not exist' and 'There is no BAPI field to screen field assignment'.
I have checked V_TFKTAXNUMTYPE table and LU2 is not defined there.
Appreciate if some one can help to locate where the system is picking up 'LU2' from, and help me fix this issue.
Thanks in advance,
Madhavi.
Edited by: Madhavi99 on Nov 19, 2010 3:52 PMKrishna,
Using T-code SM30, check the table V_TFKTAXNUMTYPE, and you probably will not see an entry with CA0 in the table. This should be added here in this table (I am not sure how, may be it is a patch sent by SAP or an OSS note..We opened an OSS note and will let you know when I hear from SAP).
With out adding CA0 in the above mentioned table, you might be using the field for VAT registration field while creating BP master data. I figured out from the way we were trying to create BP, Country code (for example CA in your case) 0 ie., CA0, is for the VAT registration number, Country code1 (for example CA1) is for tax number 1, and CA2 is for tax number 2 fields.
After the above mentioned table is updated, using BP tcode, this code 'CA0' should be assigend to the business partner number that you are trying to create under identification tab.
I hope, I made it as clear and understandable as possible. But, if you have any quesitons, please let me know.
Regards,
Madhavi. -
Creation of Worklists in Collections Management
Hi,
In FSCM collections management, I did all the config and created Business partner and moved the FI-AR data to collections management without any error.
Now, in Tcode UDM_SUPERVISOR. I dont find the entries transferred to collections management. Could anyone please let me know, whether I missed any step or how can i find the entries in the worklist.
Thanks in advance!!!!
Regards,
AmeetHello,
1) Make sure the master data for your BPartner is updated (either manually or automatically) Role UDM000.
2) Please copy the standard strategies delivered by SAP (transaction UDM_STRATEGY). It happen once that the strategies were not doing anything at runtime...
3) Adjust your entries in UDM_GROUPS with the new strategies.
4) Run the worklist selection again (UDM_GENWL). Make sure you mark the flag "Distribute Items" and "Start Online".
... now check the UDM_WL_ITEM table.
If nothing appears, post the log given by UDM_GENWL.
Regards, Jaime. -
Problem during Creation of Worklist in Collections Management
Hi,
I get the following runtime error when I run the transaction UDM_GENWL:
Short text
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_UDM_PARALLEL_RUN===========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "SAVE_PARALLEL_RUN" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
Any idea what this could be due to? Is this an errorin the standard program?
Thanks and Best Regards,
MadhuHi Mark,
I'm selected the checkbox "Start Online" in the selection screen for Generating Worklists. So, I believe I'm running it in the foreground. As for the selection screen parameters, here they are:
Collection Segment: TEST_SEG
Worklist Valid From: 10.10.2010
Distribute Items: Yes (Checkbox selected)
Distribution Method: Even Distribution to Collection Specialists
Start Online: Yes (Checkbox selected)
The master data and configuration have been made in the usual way for Collections Management as per the help documents.
I've created a customer via the Business Partner using the Master Data Synchronization.
Any idea what the issue could be?
Best Regards,
Madhu -
Collections Management - Notes Stored at Document Level
Hello everyone,
I am working Collections Management in SAP ECC 6.0, EHP1. I am wondering if it is possible to add notes to specific documents while in the Process Receivables screen. I know that Dispute Cases or Promises to Pay allow this functionality, but I am wondering if it is possible without creating one of those case types.
If this isn't possible, are there any user exits that will allow it?
Thanks,
JasonJason,
In short the answer is no.
What sort of notes are you looking to hold?
You are right you could create a P2P or a Dispute to add notes.
Against the a/c document, you could look to add some notes in the "service for object" part of the document.
Then when you drill into the document, you will be able to see the notes. -
Errors in Cisco Collection Manager for SCE
I installed Collection manager and I got errors in logs:
[root@sce-cm ~]# tail -f /opt/cm/cm/logs/adapter-JDBCAdapter.log
2012-05-27 22:41:32,073 [wrkr/JDBCAdapter] ERROR com.cisco.scmscm.db.DbInserter.RPT_LUR - insert err (more details in next line), tag=4042321925, fieldNo-1=13 curSqlIndex=16, i=15
java.lang.ArrayIndexOutOfBoundsException
2012-05-27 22:41:32,073 [wrkr/JDBCAdapter] ERROR com.cisco.scmscm.adapters.jdbc.JDBCAdapter - processRDR - got Throwable
java.lang.ArrayIndexOutOfBoundsException
2012-05-27 22:41:32,073 [wrkr/JDBCAdapter] ERROR com.cisco.scmscm.db.DbInserter.RPT_LUR - insert err - Exception while inserting the rdr values [0, 3, 71, 300, 300, 1338139200, 0, 1, 4, 8, 0, 0, 1], for the rdr tag = 4042321925
java.lang.ArrayIndexOutOfBoundsException
2012-05-27 22:41:32,073 [wrkr/JDBCAdapter] ERROR com.cisco.scmscm.db.DbInserter.RPT_LUR - insert err (more details in next line), tag=4042321925, fieldNo-1=13 curSqlIndex=16, i=15
java.lang.ArrayIndexOutOfBoundsException
2012-05-27 22:41:32,073 [wrkr/JDBCAdapter] ERROR com.cisco.scmscm.adapters.jdbc.JDBCAdapter - processRDR - got Throwable
java.lang.ArrayIndexOutOfBoundsException
RPT_LUR table is empty.
How can I resolve this issue?
Version is 3.7.5Hello Marat,
It seems that you might be hitting this one CSCtz20343.
Please check it.
Thanks,
Minja -
An error prevents the Change Management Upgrade script from executing
I have Warehouse Builder 10g on a database 10g R1.
On a server linux I have the repository, and on other server (Sun 5.9) I have runtimes for production.
I want execute an upgrade deploy action on one object but I get this error:
An error prevents the Change Management Upgrade script from executing successfully. We strongly advise that this Upgrade is UNDONE and the problem is investigated. Data loss may occur if you accept this Upgrade
Any idea?
Thanks,
Fernando.I review the installation, it was made with a diferent user that database, I get same permission, restart runtimes service and problem was resolved.
Fernando. -
Posting a incoming payment collection management
Dear All,
I am posting an incoming payment for an overdue item using the t.code f-28 and transfering the payment using FDM_coll_send01.
The output details is saying that no payments updated for the customer 'x'
If i open and see the worklist the overdue line item of that customer is not there and in the payments tab also the payment is not appearing it is not appearing.
Any idea of why it is not getting updated...
thank you
vassyMahesh,
The logs are green and to my knowledge everything has been activated. Mind you, everything is working, including automatic synchronization of Business Partners from customer master data and open items, promise to pay etc in Collections Management. The only piece that is not working are the payments not coming across. The table FDM_COLL_LASTPAY is blank and thus they don't come across when you run FDM_COLL_SEND01.
One thought I had was that the reason it is not working is because there is no company code specific data in our Business Partner master data, since company code is part of the key of the FDM_COLL_LASTPAY table. We followed the following guide to setup the syncing of customers to Business Partners:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b001aec0-b12d-2d10-3faa-b416e6de0270
As a result, when a customer is created, we get the following tabs in corresponding Business Partner - Address, Address Overview, Identification, Control, Payment Transactions, Status and Collection Profile. I do not see any company code specific data at all. I have not been able to find any information on how to bring company code level data to BPs. Not sure if that is the right direction.
Best regards,
Anton -
FSCM Collection Management with FI-AP
Dear SAP Experts
I am using FSCM Collections Management with FI-AR. I have linked my customer and vendor in FI-AR & FI-AP and selected clearing between the two master records, does anyone know if it is possible to pass FI-AP data (e.g. vendor credit memos) to FSCM Collections Management so that they appear on a worklist? I cannot move Contract Accounting for various external reasons.
Thanks
SimonHi Simon,
Yes you can. Please, make sure if this is vendor has the role that can be identified as it like a customer. Normally, by BP transaction you can see this role.
The BP was used because this scenario. Since 6.0 version, the vendor can be customer and customer can be vendor by using unique code or BP number.
Please, check the documentation below:
Customer/Vendor Integration - Business Partners - SAP Library
JPA -
Implementing Finanacial Supply Chain Management - Collections Managment
Dear all
We are in the process of Implementing Financial Supply Chain Management - Collections Management. We are also looking at business content in BI 7.0 as reporting solution.
While 0CLM_MC1 and 0CLM_MC2 are providing most of the data related to call worklist (like amount due, amount disputed, amount promised,dunning level etc etc) , an important piece of information that is crucial for debt reviews which is the text information stored in promise to pay and customer contact is missing.
Is there any way to upload this information (Long Text) is BI.
Thanks & Regards
Sachchida Nand DubeyHi,
U can go for BDC to upload ..
i.e.
'GUI_UPLOAD'
In general BDC and BAPI's are used to upload the data...mainly BAPI s are used to upload the bulk data...
if it screen flow then go for BDC upload...otherwise go for the BAPIs FM's
Regards
Kiran
Edited by: Kiran Saka on Feb 9, 2009 10:52 AM
Maybe you are looking for
-
The style of the horizontal spry menu seems as to have been turned off when on the web though is visible and functioning on CS4 Dreamweaver design and live views. I have styled the spry menu and can view it in the properties section though the style
-
Transaction log shipping restore with standby failed: log file corrupted
Restore transaction log failed and I get this error: for only 04 no of database in same SQL server, renaming are working fine. Date 9/10/2014 6:09:27 AM Log Job History (LSRestore_DATA_TPSSYS) Step ID
-
HT1620 Why is it asking me for a pass code and I didn't set one?
Why is it asking me for a pass code and I didn't set one up. This never happen before when I updated to the most recent IOS on my Ipad2?
-
Upgrading the report version from Crystal Reports 10 to Crystal Reports 11 without REDESIGN
Post Author: Chakradhar CA Forum: Upgrade to XI 3.0 HI All, Please provide a solution for this.. Is there any way to upgrade the version of a report without redesigning the report? If we upgrade the report without redesign, dont we lose the special f
-
Can't open fly transfer connection on computer
purchased fly transfer (transfers pictures, documents, etc. via wifi.) url code does not open app on computer. attemped to contact app support. no response so far. help