Color and Sounds

my first question is:
is there a way a to script an in game coloring tool using the mouse and a gui set up that contains the color values. This will then be put into a MC for which while the mouse is held down, it will color lets say a 30 pixel diameter on the stage.
the second question is:
I was wondering if there is a way to record an audio file during a flash game, and then to immediatley use that upon request.
tutorials for these would be great!
and thank you for the help

1.  yes.  start with a color picker component.
2.  if you're using as3, yes but this is an advanced topic that requires use of the flash bytearray.  check google for info and possibly a tutorial.

Similar Messages

  • Screen turns alot of colors and sound contiues

    I will be watching a video or coming back on after sleep and the screen will turn a bunch of colors. Some times the sound continues as normal, but other times a loud screeching noise starts. It has been happening for a couple of months. Its not very often just here and there. In the past when I had a PC and something like this happens it was the graphics card. It happened when I was running snow leopard and now I did a clean install of Lion it has happened for the first time last night. I have only had the 27inch mac for 5 or so months. Any advice?

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    However...
    In your caes (having dropped the iDevice) it looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required... Be sure to make an appointment first...

  • My MacBook Pro has an aerphone jack but nothing for microphone. I am trying to use Dragon Dictate and a friend gave me a USB attachment to connect to the mic and headphone. It is in a transparent plastic case charcoal gray in color and says 3D sound on th

    I have Dragon Dictate but did not notice until now that the earphone jack is only for listening so I cannot dictate using headphones and the mic on the computer is not good enough for that. A friend gave me a USB card that says 3D Sound on top; it is  a plastic case, charcoal gray in color and side jacks to connect headphone and mic. Connected to computer but it does not do a thing. Any ideas on how to make it work?

    You are not supposed to connect a pair of speakers(as in left and right in a stereo pair)to two separate out jacks on the sound card.the place on the card where headphones/speakers with the mini jack goes is the right place.

  • Ibook g4 my screen is funny colored and some flashing sometimes goes back to normal anybody know whats wrong with it I just got it 2 weeks ago?

    I have a problem with a apple ibook g4 I bought 2 weeks ago 
    from ebay. It had tiger and I installed leopard on it and it had been 
    working perfectly for about a 2 weeks. There was nothing wrong using 
    tiger except it did not remember my settings. I would have set up my 
    email or itunes everytime the computer started. I wanted the updated 
    leopard so I installed that and it fixed the memory problems. After 
    that it worked great with no problems at all for a week, until now. Here is my problem when I start my 
    ibook it starts up with a blue screen instead of the grey screen. This all started when I closed the top and 
    put it in sleep mode when I opened it back up when it came out of 
    sleep mode the screen looked funny colored and a little 
    fuzzy. I have shut the top down and opened it hours later and it never did this before. Sometimes it will flash in and out of the funny colors to normal 
    look and other times it will stay that weird fuzzy off looking color. And it will start and sometimes flash between funny 
    looking to normal and then switch to normal color. I had no problems 
    with it doing this until 2 days ago. I am sending you 
    this email using my ibook g4 and it looks normal right now for a few seconds then it flashs a little and goes back to that weird screen. This 
    morning when I first started it up it went weird colored a little then 
    back to normal and stayed normal for about 1 minute. Yesterday when I was using it I saw 
    a quick blue colored flash once in a while as it looked normal other then the flash then went to the strange colors. It has never done this 
    before either until 2 days ago. My battery does not set 
    flush in the case but I don't think that would be a problem. My Ibook 
    is the 14" version with 1.42 Ghz  PPC 7450 chip and 1 Gb memory. This 
    is my 1st apple and not as familiar with it as windows. What do you 
    think is wrong with it? It worked so good up until now. I would hate 
    to just junk it I just bought it. I have heard it coulod be the logic board. Does anybody have a clue what is wrong? Any help would be VERY much appreciated. Thank You, Jim

    It does sound like the logic board. It's not uncommon for an iBook with a faulty logic board to work intermittently. You can't count on it, though. It could fail completely at any time.
    DT&T Computer Services in Fremont, California has the best deal I've found on logic board replacements. They do free diagnostics, so they would make sure that's what you need, and there is a six-month warranty on the repair.
    http://www.dttservice.com/ibookg4.html
    I'm always a little sad that people are basing their opinions of Macs on these older iBooks. Yours is the newest iBook in existence, but it's still over five years old — ancient in computer terms.

  • Odd Issue Editing in Photoshop with color and lens corrections

    First off, I'm on LR 4.4 and PS CS6 (Camera Raw 7.4.0.137) using ProPhoto RGB as my LR colorspace and have my PS color settings as Working Space: ProPhoto RGB and my color management policies to preserve embedded profiles.
    When I right click on a DNG in LR and choose "Edit in Photoshop", LR sends it to PS and PS does its "Reading in Camera Raw Format" and opens the image.  However, the colors are off (very muted) and any lens corrections I've applied in LR are missing.  My monitor (iMac on OSX 10.8) is calibrated with a Spyder.  I've also noticed that if I choose to edit in another application, it renders the tiff fine and the color and lens corrections are correct in the tiff. 
    Anyone have any ideas what my issue is?
    Thanks,
    Matt
    ETA: After some experimenting, it seems that the "Adobe Standard" profile is what gets sent to Photoshop.  The rest (Camera Landscape, Portrait, etc.) are ignored. What's going on here?

    Sounds like you need to reset your warning dialog. Preferences>General>Prompts [Reset all warning dialogs]
    Then try it again and make certain of the three choices you are Editing a Copy with Lightroom Adjustments.

  • Is there a chart/table showing colors and corresponding Hex codes?

    Hello all,
    I'm studying how to change the color properties on panel components programmatically, and I can find the property, but is there a chart or graph somewhere that shows for LabView the color and the corresponding hex code for it? I'm wanting to be able to look for a color I want, and find the hex code for it rather than just trying random number combinations.
    I'm guessing there is something out there like this, but I've not been able to find it yet....
    Thank you in advance,
    cayenne

    On your block diagram go to Graphics & Sound >> Picture Functions and select the Color Box Constant. When you click on the box it will bring up a color selector. You can use this to pick the colors that you want. If you really need the numbers, connect the Color Box Constant to a U32 indicator. It will tell you the number for the color that you picked (select the indicator's Display Format to be Hexadecimal and you can see the hex digits for the color you have selected).
    On the front panel you can select Numeric >> Framed Color Box to have the same box as a control.
    Rob

  • Sass scss code coloring and code hinting

    Cannot get Dreamweaver to treat .scss files as style sheets with CSS code coloring and code hinting?
    Have tried editing the MMDocumentTypes.xml file located in the /Applications/Adobe Dreamweaver CS5.5/Configuration/DocumentTypes folder, as recommended by other users having this issue.  Still no code coloring or code hinting.  I suspect there may be multiple MMDocumentTypes.xml files and I need to find the correct one?
    O.S.:  OSX Mavericks
    Dreamweaver:  CS5.5

    kms5038 wrote:
    > I no longer have code coloring or code hints working on
    Dreamweaver. I checked
    > the preferences and everything is still set the same but
    whenever I open an
    > existing document it will not give me the code coloring
    or code hints. I still
    > get it when I open a new doc but nothing else. Any ideas
    on how to fix this?
    It sounds like DW does not recognize the file type of your
    page. What is
    the file extension?
    Randy

  • 2008 macbook pro 15" (Santa Rosa) weird display color and vertical lines

    I have the 2008 macbook pro 15" (Santa Rosa). After my upgrade to mac os x lion (10.8.2), I noticed that periodically the screen either turns to weird display color and have horizontal lines on screen. This happens mostly during start up and lasts for about a min or two. Does this happen because of a faulty graphics card? I have NVIDIA GeForce 8600M GT 256 MB card on this macbook pro. Please advice

    Nope - it sounds as if you've GPU issues and the discrete GPU is soldered onto the logic board. take your new machine into your local Apple Store for a replacement. Don't wait too long!
    Clinton

  • After Effects and Sound

    Hi,
    I am aware that the following question will probably need to end up on the audition forum, but I wanted to start it here, as I have NO idea where to begin, and this is the forum that has been most helpful to date! (and I am a a firm believer that flattery will get you everywhere!)
    As most of you are aware by now (the regulars, that is) I am working on a project that is aimed at young children, and will be aired on TV. I am slowly but surely getting to the point where I feel reasonable comfortable doing an edit in premier, and then compositing, green screening and adding effects in After Effects.
    My next great challange is sound. I am about to start with Adobe Audition, but would appreciate some feedback on anyone out there who has worked to produce a project for broadcast before. I have read the BBC Tech Specs as a starting point for broadcast, and it seems to be a scary place!
    I think my first basic question is this: Do I do the complete project edit in Premier, sounds added as and where needed and then, using the export features, will I be able to export the project to meet the specific requirements. If I remmeber correctly now, the video, music and sound need to be sent in three seperate formats to be combined by the broadcaster.
    Is this the way it works, and are there a few links that can be given for a "Getting started" with Audition. I will be looking to purchase the Classroom in a book, and learn by video - peachpit type books over the next few days.
    Thanks to all, and sorry for being so far off topic (this early in the year already!)
    Pierre

    The format your professionals want depend on the system they are using. A ProTools setup is different than an Audition setup. I usually render a compressed color corrected but not necessarily final color grade picture with a rough mix. and give my mixer either a PPro project with all audio tracks and one picture track or a FCP project with a single picture track and all audio including the rough mix, or I send them the compressed video file and export an OMF file with handles. There are plenty of instructions on the Internet.
    Here's another good practice. Every audio track should be separate. You put audio from two actors having a conversation on two tracks. Every sound effect on a separate track so you are NEVER cross fading on the same audio track.
    You also want to remove any audio effects, level changes, or other audio processing before you export your OMF file. A typical short film with have 16 to 20 audio tracks depending on the number of actors in a single scene. The ideal situation with five actors speaking in a scene at the same time on 5 separate wireless microphones onto 5 separate audio tracks. Lots of times you'll end up with a location mix with your dialogue on just two tracks, but if you can, separate everything. When the scene changes you can put different actors on those 5 tracks. Dialogue is not usually recorded in stereo unless you're doing a location mix.
    Usually right below the dialogue tracks you will have a track for 'room tone' or 'background'. A good audio tech will record several seconds of just the sound of a location that can be looped to provide a consistent audio background for the scene. If you are using room tone tracks you'll need two or four if you are working in stereo.
    Below dialogue is where SFX go. Here again, cuts only, no keyframed audio level changes and no EQ or effects. If you have a lot going on in a scene then you can easily need a lot of overlapping sound effects. One track for each.
    At the bottom of the stack is where the music tracks go. I usually have 4 because most stock music is stereo, but sometimes 8. If you're lucky enough to have your project scored you can have a bunch more. The last made for TV movie I cut had 24 music tracks from the studio session, a production Dolby 5 mix from the recording studio, and a stereo mix for me to rough in. We sent everything to Skywalker Ranch for mixing.
    So there you go. A production with 5 cast members would have 16 to 20 audio tracks.
    There are lots of resources on the net on preparing for an audio mix.
    As far as the format for your source files, your sfx and your music; I'd stick with wav files 48KHZ at a minimum. Avoid compressed audio sources as much as you can. mp3's may be great for your iPod but they can be next to useless in audio production. If you must used compressed audio as a source file then get the highest bit rate available.

  • I have lost the ability to change fonts,use color and size and when I try to write anyone,I cannot see my mailing list and there is no send button.

    A few months ago my ability to use different fonts, colors and sizes suddenly disappeared. These choices were always available when looking at my email and I used them regularly . No one I asked ever heard of such a thing happening. I left it alone until I found someone to help. Then, a few days ago, when I clicked "write" , two things happened. First, I could not forward, reply or even see my collected email addresses. Second, there was no longer a place that said "send". My email page filled the entire screen and when I scaled it down, there was still no way to see my list or to send. I am a novice when it comes to fixes and terms but, I have asked people who have some experience with PC's they were stumped. I contacted Fairpoint and they said it must be a Thunderbird problem. Most of the people I asked said they didn't know Thunderbird. One suggested that I reinstall T.bird but, said I also might lose everything on my PC. I would appreciate any help you can give. Thanks, Jim

    When you click Write and open the new message editor, press Alt to show the Menu Bar, then enable all the toolbars under View/Toolbars. Plus, press F9 to show the Contacts sidebar.

  • Problem with kde and sound

    Hi!
    I've a problem with KDE and sound.
    When KDE shows a alert the alert's sound sounds with delay. 3-5 seconds.
    Same happens with kde start.
    Can anybody help me?
    Thanks!

    Pilli wrote:
    Hi!
    I've a problem with KDE and sound.
    When KDE shows a alert the alert's sound sounds with delay. 3-5 seconds.
    Same happens with kde start.
    Can anybody help me?
    Thanks!
    Change the player to mplayer or something in the control panel (Sound and Multimedia - System notifications - Player Settings).

  • I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.

    I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .

    If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
    Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
    Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp

  • Edit a png file... change colors and text and then export to gif?

    First I want to state that I am VERY new to Fireworks and I am trying to figure out how this works!  I typically use Photoshop.
    I was sent a PNG file (from a friend).  The file has many buttons on it that I believe are somehow saved or exported out as gif images to be buttons on her website.  All of the buttons are basic rectangles that are gray with black text.  She was told she could edit all of the buttons quickly in Fireworks (change their color, font color, etc) and it would change them all together.  Then save them all out so we would have the individual gif files for the buttons to save to the directory.
    So... I am able to open the png file in Fireworks and I can select each button or all of them, but I cannot see how to change their color and font, etc.  I know this must be very simple!  Can someone help me?
    Thank you!
    Sharlyn

    Have a look in the ocument Library panel to see if the buttons are Symbols. If yes, then double click on one of the buttons to open it in the symbol editor where you can easily make changes in all of them at once.

  • Report Generation broken after deployment - Excel Set Cell Color and Border.vi

    Upon deployment, the Excel Set Cell Color and Border.vi became broken.  After installing LV2010 SP1 to view the VIs in the deployment, I noticed that in the second case structure where the code draws the border using the BorderAround invoke node, there is an extra variant input parameter named 'Parameters'.  Upon right-clicking, an option to 'Relink Invoke Node' appeared and after selecting this, the extra input disappeared and the VI was no longer broken.
    Why does "Relink Invoke Node" appear?  How do I create a deployment with this issue?  Has anybody else experienced this?  Why is the TestStand deployment so buggy?  

    Hi Ching-Hwa,
    I have set up a test deployment here where I am deploying a workspace that contains a sequence file.  This sequence file has a LabVIEW Action Step calling a VI that opens a new Excel file and simply calls the Excel Set Cell Color and Border VI.  After deploying this, both the VI and my test sequence ran on the deployment machine without error.  Therefore, I do have some more questions to more accurately reproduce what you are seeing.
    First, what operating systems are you developing on and deploying to?  Also, what license do you have for TestStand on the machine you are deploying to?  If you have a development version, can you manually take the sequence file and VI to this machine and run it?  I know you now have LabVIEW 2010 SP1 on your development machine, but if you have the development version of TestStand as well, it would be interesting to see if you copy the files over if you still see this behavior.  Are you including the TestStand Engine in the deployment?
    Can you open a blank VI on the deployment machine and add the Excel Set Cell Color and Border VI?  It would also be interesting to see if this is not a product of the deployment, but rather an issue with something on the deployment machine itself.  What version of the Report Generation Toolkit do you have on each machine?  Also, what versions of Excel are you using on the development and deployment machine?  Again, it would be helpful for me to know exactly what versions you have installed on both the development and deployment machines so that I can reproduce this as accurately as possible.
    One last thing to try, too, would be to try deploying the VI by itself just to see if it also has the same behavior.  Do you have the Application Builder in LabVIEW?  If so, could you also try building an executable from the VI, create an installer, and deploy this to the deployment machine?  
    In regards to the "freezing" of code by removing the block diagrams, I do not believe this will be a proper work around in this case.  While this removes the block diagram from actually being deployed along with the VI and restricts users from editing the code on the deployment machine, if something is getting changed in the compiled code upon deployment, this will not stop this from happening.  This option is available more as a memory option to lower the size of the deployment as well as prohibit any users on the development machine from editing the block diagram themselves.    
    Thanks, Ching-Hwa!  I look forward to your response so that I can continue trying to reproduce this issue.  Have a great day! 
    Taylor G.
    Product Support Engineer
    National Instruments
    www.ni.com/support

  • I am using logic to record a podcast and using soundboard to use as a playback for music and sound effects.  I'd like to soft patch sound board into logic, and still use my interface for recording audio from the other members of the podcast.

    I am using logic to record a podcast.  I have a presonus firestudio mobile for my interface so I can record several people at the same time.  I'm also using Soundboard for a playback system for music and sound effects.  I'd like to know how to soft patch Soundboard into Logic while still using the Firestudio interface to record the other members of the podcast.  Does anyone know how to do this? and if so can you tell me how to do it?  Thanks.

    Thanks. Now, since Apple failed to provide an audio in jack for their new and improved iMacs (mine has one), all I can suggest is that you contact AppleCare, since you have 90-dqy free phone support. If need be, you might reconsider your purchase, but that's for you to decide.

Maybe you are looking for