Color changed when webdynpro application is called from Portal

Hi,
I have developed an Webdynpro application, but the orginal color has been changed if I call it from portal.
Does someone have an idea how to deal with it?
best regards

Hi,
The attribute name in iView configuration is 'Supply Portal Stylesheet'. It should be marked as 'No' to not to use the Portal Style Sheet.
Ranganathan.

Similar Messages

Closing a webdynpro application, should call a portal page

Hi All,
I have a requirement in which, after a webdynpro application is closed in portal, the portal should show the workset content from which the webdynpro application is triggered.
For example,
Wedynpro application Created is ZWDA1.
Two iviews are created in portal which refers to the webdynpro application ZWDA1, the portal Iview names are ZPORTAL_IVIEW1, ZPORTAL_IVIEW2.
Two worksets ZWORKSET1 & ZWORKSET2 are created in portal which refers to Iview ZPORTAL_IVEW1 and ZPORTAL_IVEW2 respectively.
Two roles ZROLE1 & ZROLES2 are created in portal which refers to workset ZWORKSET1 & ZWORKSET2 resepectively. These two roles are assigned to users ZUSER1 and ZUSER2, when these user logs into portal they will see the content of the workset ZWORKSET1 & ZWORKSET2 respectively.
Assuming ZUSER1 and ZUSER2 invokes the portal ivew ZPORTAL_IVEW1 & ZPORTAL_IVEW2, the underlying webdynpro application called is same. So in the webdynpro application only I need to write the code to close the application and call the workset ZWORKSET1 for ZUSER1 and workset ZWORKSET2 FOR ZUSER2. This differentiation I am not able to indentify in webdynpro application, I thought of using relative navigation.
Any suggestion to achieve this functionality is greatly appreciatable
Regards,
H.K.Hayath Basha.

Just closing the message

Issue in webdynpro application while calling from UWL

Hi All,
I am working on APPRAISAL workflow in HCM module.
In new version of SAP has provided ABAP web dynpro application HAP_MAIN_DOCUMENT (component HAP_MAIN_DOCUMENT)
but it is not integrated with workflow. Earlier insted of this application there was a BSP application and this was integrated with workflow.
Now to integrate ABAP webdynpro application with workflow I have created new web dynpro application and calling HAP_MAIN DOCUMENT application and when I test through SE80 transaction then I am just passing Work Item ID and it is opening HAP_MAIN DOCUMENT application. I have done it as follows.
In swfvisu I am passing Work Item ID and In application I am getting business object details using this I am createing a URL and then using exit plug I am calling HAP_MAIN_DOCUMENT application
*METHOD exit1 .*
* DATA lo_nd_new_url TYPE REF TO if_wd_context_node.
**DATA lo_el_new_url TYPE REF TO if_wd_context_element.**
**DATA ls_new_url TYPE wd_this->element_new_url.**
**DATA lv_url TYPE wd_this->element_new_url-url.**
**DATA: l_cmp_api TYPE REF TO if_wd_component,**
        **result TYPE REF TO if_wd_window,**
        **l_window1 TYPE REF TO if_wd_window_manager.**
***     navigate from <CONTEXT> to <NEW_URL> via lead selection**
**lo_nd_new_url = wd_context->get_child_node( name = wd_this->wdctx_new_url ).**
***     @TODO handle non existant child**
***     IF lo_nd_new_url IS INITIAL.**
***     ENDIF.**
***     get element via lead selection**
**lo_el_new_url = lo_nd_new_url->get_element( ).**
***     @TODO handle not set lead selection**
**IF lo_el_new_url IS INITIAL.**
**ENDIF.**
***     get single attribute**
**lo_el_new_url->get_attribute(**
    **EXPORTING**
      **name = `URL`**
    **IMPORTING**
      **value = lv_url ).**
**wd_this->fire_exit_plg( url = lv_url ). "abap_true**
*** l_cmp_api = wd_this->wd_get_api( ).**
*** l_window1 = l_cmp_api->get_window_manager( ).**
*** result = l_window1->create_external_window(**
***url = lv_url ).**
*** result->open( ).**
**ENDMETHOD.**
In SE80 it is opening application perfectly in same session of new Z webdynpro application.
But when I click on UWL workitem it is not opening.
In dubugging I checked that workitem ID is passed correctly also URL is created correctly for HAP_MAINDOCUMENT but it is not opening.
Please let me know is there any setting in UWL config.
Edited by: Akshay Kale on Nov 17, 2009 11:51 AM
Edited by: Akshay Kale on Nov 23, 2009 10:07 AM

Hi akshay,
   Check the following links ,
Workitems, UWL and Web Dynpro for ABAP
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20f4843e-314f-2a10-2a88-8c4afa20dda6
another that talks about swfvisu
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a002d1eb-33f0-2b10-f391-e1e0c3057c17&overridelayout=true
hope this helps.
Thanks,
Sahiba

RFC call from portal gives dump call_function_open_error

Hi all ,
We have a RFC function module where standarad BAPI BAPI_ENTRY_SHEET_CREATE IS USED
where a dump call_function_open_error occurs when the rfc is called from portal , while on r3 it works fine.
I wanted to know if somebody has faced this kind of problem anytime and what can be the possible solution .
There is no problem with data , there is no problem with RFC where can be the problem ?
Please suggest >

Hi Bhanu,
Can be helpful
too many dumps in production Env: CALL_FUNCTION_OPEN_ERROR

How can I detect in Business HTML that the app was called from portal?

How can I detect in Business HTML that the app was called from portal?
I need to distinguish whether the application was called from portal (URL iView) or by using an URL outside of portal.
So what I'm looking for is a variable or function that can be used like this:
`if (~within_portal==1)`
do this if called from portal
`else;`
do that if not called from portal
`end;`
For example, can I check in the program that there is a SSO2 cookie from the portal?
I'm using Integrated ITS in Basis 700.

Here is the trick:
if (sapwp_active=="1")
in portal
else
without portal
end;

When I place a call from my iphone, I am identified to the receiver of the call by my state of residence instead of my name. How can I change this? Thanks!

When I place a call from my iPhone 5s, I am identified to the receiver of the call by my state of residence instead of my name. How can I change this? Thanks!

That would be an issue on the recipients end.
sounds like they didn't save your number in their contacts.

Rules applied to multiple cells trigger color changes when any of the cells

"Rules applied to multiple cells trigger color changes when any of the cells meet the rule’s condition." That's what Help says, but when I follow the directions, it doesn't work. This is in Numbers 08.
I have a table where the contents of one column are either "YES" or "NO", depending on formulas using variables from other cells. If YES, I want the fill of that cell and that of two adjacent cells to change from white to green. I select all three cells and use conditional format rules for "text contains:" YES, then choose my fill color. When I return to the table and introduce values for the variables that trigger the rule, only the cell in the YES/NO column changes to green; the other two remain white.
While I am spreadsheet challenged, I usually can follow directions as plain as those in Help, but it's not working. I couldn't find anything in the discussions after an hour of searching. Is this a known problem or am I just stupid?

For what it's worth, that's the way I read that line in the User Guide as well. What it actually appears to mean, though is 'Rules applied to multiple cells apply independently to each of the cells."
Here's a workaround for your three adjacent columns. Long, but fairly simple steps.
Add a second table to the sheet (Table 2).
Resize the second table to one column wide and as many rows as you want to apply the conditional format to.
Set the width of the column to the same width as the three columns you want to highlight, and the row height(s) to match the rows.
Format to table to have NO Header or Footer row or column.
Use the Wrap Inspector to uncheck "Object causes wrap"
In the first top cell of Table 2, enter an = sign, then Click on Table 1 in the sidebar, Click on the first cell that will hold YES or NO.
Fill the formula down the rest of Table 2.
With all cells in Table 2 selected, use the Cell Format inspector to set the 'text contains yes' rule and the conditional fill colour for these cells.
Test the conditional formating by introducing values into Table 1.
Click on Table 1 in the sidebar, then use the Table inspector to set Cell Fill to 'none'.
Click on Table 2 in the sidebar, then drag that table onto table 1 aligning it to cover the cells in which the conditional formating is to appear.
When positioned (and still selected), go to the Arrange menu and Send Backward to move Table 2 behind the (transparent) cells in Table 1.
With Table 2 still selected, click on the Cell Borders color well and set the Opacity of the borders to 0%.
Click the Text inspector and set the Text colour Opacity for Table 2 to 0%.
Regards,
Barry

Nothing happens when I make a call from my smartwatch 2

Hello,
I brought a new Smartwatch 2 and paired it with my Samsung Galaxy S4 with Android 4.4.2. I can see my contacts, messages etc on the smartwatch 2. However when I place a call from the Smartwatch 2, nothing happens and the call is not dialled out on my phone. Please help.

Suryanarayana wrote:
Hello,
I brought a new Smartwatch 2 and paired it with my Samsung Galaxy S4 with Android 4.4.2. I can see my contacts, messages etc on the smartwatch 2. However when I place a call from the Smartwatch 2, nothing happens and the call is not dialled out on my phone. Please help.
I had the same issue. Mine was caused because I had more that one application to place calls (ie. system dialer & skype).
When you try to place a call from SmartWatch it doesn't know which app to use. SW shows that it is calling but phone does nothing.
Steps below resolved issue for me:
1) Connect SW to phone (quite obvious)
2) Unlock phone so the screen is ON during next steps (you may consider to temporarly extend screen standby time)
3) On SW select dialer app, try to make a call
4) Now on the phone (with screen unlocked and ON) a popup message should appear asking which app to use. Select dialer and "Always use this app"
5) Phone will start calling. Disconnect.
Now you should be able to call from SW even with screen off & locked.
Best regards,
Sergio PL
Xperia Z1 / Nexus 7 (2012)

When making an outgoing call from my i phone, an icon of a microphone with a slash acroos it appears. I can hear the receiving party speak, but he cannot hear me. What has been shut off and how do I turn it on?

When making an outgoing call from my i phone, an icon of a microphone with a slash across appears. I can hear the recipient speakin but he cannot hear me. What has been turnedd off, and how do I turn it on?

I think mute is on, tap the microphone icon with the slash running through it

Can you increase the size of the photo that shows when you receive a call from a contact

Can you increase the size of the photo that shows when you receive a call from a contact ?

It used to be if you added the contacts photo on the iOS device they would have a large picture and if you added it from Address Book on OS X they would have a smaller thumbnail. However, since iOS5, all I've been able to get is the larger photo. Try adding the picture directly in the contacts app on your device. That should make it larger.

Color change when opening in Reader

Hi, I created a PDF in Photoshop. I then added an editable field in Acrobat, using the same RGBs. When I open the file in Reader, the color of the editable field does not match. Any suggestions on what I can do to resolve this? I have the most recent version of Acrobat and Reader.
Thanks,
Jackie

Here is a screen shot of the reader PDF, followed by the original file in Acrobat. You can see that the entire document color changed when I opened it in Reader.
THanks,
Jackie

Why do the colors change when I reopen a document?

Why do the colors change when I reopen a document?

Are you opening the same Pages document or do you open another document like Word? I has recently been a similar discussion in this forum.

I just upgraded to ios8 on my iphone4s. When I attempt to call from my car there's no ringtone.

I just upgraded to ios8 on my iphone4s. When I attempt to call from my car there's no ringtone. Only silence until the call is answered. Has anybody else had this problem? Has it got to do with the ios8 upgrade? (Actually 8.02)

which Apple says should appear automatically once the update is completed...
I am perplexed where you read that. It isn't true. The iPad is synced to the data available to all devices using the iCloud account if you have authorized it in the settings; PhotoStream, Contacts, Mail, Calendars, etc. That is how the iCloud works.

People can't hear me on the other end when I make facetime calls from my Imac

People can't hear me on the other end when I make facetime calls from my IMAC

I had the same problem on my brand new iMac and Apple Care solved it for me. Very simple.
1. Restart your computer
2. As soon as you hear the chime, press the SHIFT button until you see the Apple logo, then release it. This will put your computer into safe mode. When your computer boots up to the home screen in safe mode, Facetime will NOT work. That's normal.
3. After your computer finishes booting up to your home screen, restart it normally. That solved the problem for me.
Apple Care said that putting the computer into safe mode results in a diagnostics check that can fix certain problems. I hope this helps someone else.

In Decision task, Method defined after execution is not called from Portal

Dear All,
In one of my scenarios, I am using a decision task for approval.
In that after the approval action is taken i am calling a BAPI to update business function.
I have called this BAPI in the Methods ( After Workitem Execution ) .
When I execute this task from the SAP Inbox , the method is getting called successfully and the BAPI is also executed successfully. But when I approve the task from portal this method is not getting called at all, and BAPI also fails.
Actually in the workitem display , I am using the standard FM SWU2_INPLACE_DECISION_PROCESS, will it have any impact when its used from Portal ?
Is there any common place that will be called from both SAP Inbox and Portal after the task execution , so that based on the decision taken , I can process the action at the same place.
Advance thanks for your response.
regards,
Sabari Prabhu.

Hello,
Unfortunately, that I know, there is no way to call your BAPI if you're using the standard decision JavaWD. In fact all that WD does is calling a WAPI to read the decision alternatives and then once the user has taken his decision it calls another WAPI to feedback the decision into the backend.
The blog mentionned by Pavan concerns only the secondary methods with amodal call, this is different from the before and after methods which are not supported and cannot help you for calling your BAPI. The so-called "Program exits" are not supported either.
The only alternatives I can see for you are:
- Develop your own decision screen specific for your workflow and integrate there your BAPI call. This would also give you more flexibility to show your agents the information they need to take their decision. This is the way I usually go for now.
- Change your UWL settings so that decisions are processed in a GUI screen instead of the JAVA WD screen. The main disadvantage is that you can do this either for all decision or for none of them. You can't just set that up for the decision in your specific workflow (or at least I haven't found how to do it).
To change the way decisons are processed in UWL you must first change the parameter "List of preview sections to hide" in your UWL iView to add value USERDECISION.
Then you must create a custom XML config file (or modify an existing one) in which you must customize each decision task used in your company individualy. To do that just take a standard config file and find the Item type entry for a standard decision task as an example. All you have to do is to recreate the same entry for each of the decision tasks you actually use and replace the defaultAction="viewDetail" parameter by defaultAction="launchSAPAction".
Cheers,
Patrick

Color changed when webdynpro application is called from Portal

Similar Messages

Maybe you are looking for