Colors in PDF are different than in the ID file

I can't figure out why this is happening but when I export a PDF from InDesign (CS5) things are changing slightly from what I was seeing in InDesign. Mainly the colors seem to be a bit greyer and the font weight has increased a little (See picture for comparison). Is there a setting in the PDF creation that adjusts this, I'm using the 'High Quality Print' setting when I go to export. Thanks.

Check your color settings in InDesign.  They should match the PDF Export settings.  It looks like the trim marks in your PDF do not allow for Bleed.  You should take a closer look at your PDF setup in InDesign.  Try selecting "Leave Color Unchanged" in the PDF settings.  At a minimum, the settings should match in both InDesign and the PDF settings.

Similar Messages

  • I will travel to France and let me know if I should buy any adapter to charge my iphone?, because the plugs are different than here in chile

    I will travel to France and let me know if I should buy any adapter to charge my iphone?, because the plugs are different than here in chile

    Hi Shawn,
    It sounds like the person who installed the hardware didn't install the software properly for you. You should reinstall this to get full functionality and control yourself.
    The process is easy:
    ) With the computer on, close all programs that are running and put the Creative CD-ROM into your computer's CD or DVD dri've. There are probably several disks; the one that you want should say 'Intallation and Applications CD' on the label.
    2) The Setup program should start automatically in a few moments, but if nothing happens, click your Start menu and choose Run..., then click the Browse button. From the 'Look In' drop-down menu, choose your CD/DVD dri've. In the list of files that appears, choose the one called Setup or Setup.exe.
    3) The Setup program will let you choose what to install. Choose to install everything. There might be two separate Setup processes that start after this: one for the soundcard's drivers, and one for the Creative MediaSource software. Within each process, when you are given the choice of Full, Custom, or Basic, select Full in each case. Follow the instructions in the programs and they will guide you through the setup process.
    IMPORTANT: you will likely be given the option to use digital output only to your speakers. Only select this if you have digital speakers, attached to the sondcard through only one digital cable. If your speakers are attached using several cables, you should use analog output.
    4) Once all of the Setup programs are completed, they will probably have you restart your computer.
    All of the above should have been done when the card was first installed, but it seems that whoever you paid to do the installation didn't bother with the software install.
    After this is all done, you should be able to use all of your speakers. If you are still having trouble, you will be able to follow the instructions that you were given before on how to enable CMSS.
    Good luck!
    Neeraj Mathur

  • Security questions are different than questions I originally answered can't access iTunes for new ipad

    Need to answer security questions to access new iPad, security questions are different than what I originally answered.

    Doubtful.

  • Aggregation mode along one dimension (product) different than along the time dimension

    Dear All,
    In IBP S&OP, Is it possible that the aggregation mode along one dimension (product) could be different than along the time dimension?
    For a demo, a customer has an input at the product family level (vehicle production) which we just “copy” for disaggregation purposes, to the product level (parts), see attached. So for aggregation we used average.
    However, time-wise, we need to sum it up.
    Thanks for your insight and help.
    Kind Regards,
    Omar

    Hi Omar,
    Yes it is possible.
    1. Create a new planning level (say PERPRODCUST1) which will be a copy of PERPRODCUST (you base planning level).
    2. In the PER section of PERPRODCUST1, do NOT mark any period attribute as root. In other words, the roots for this PL will only be PRDID and CUSTID.
    3. Now your KF calculations will be:
    VEHICLEPRODUCTION@PERPRODCUST1 = SUM(VEHICLEPRODUCTION@PERPRODCUST)
    VEHICLEPRODUCTION@REQUEST = AVG(VEHICLEPRODUCTION@PERPRODCUST1)
    Since your KF is editable, it is worth mentioning that, following the above steps has trade-offs. Since your KF is editable, you will have issues with disaggregation when you enter the values at an aggregated level of both time and other attributes. My recommendation (for your configuration) is that this will work fine as long you enter the values at the root level of you time attribute.
    Hope this helps,
    Chendur

  • Media Encoder export a different font from the project file

    HI
    Media Encoder export a different font from the project file when I use a installed font
    The problem doesn't occur when exporting directly from Premiere 
    Any ides why?
    Thanks

    Hi! This also happened to me quite a few times with different fonts. Your fix worked, thank you. I don't think it's the font since, like I said, it happened with a few fonts, but just in case I was using Mf Young & Beautiful in TTF format.
    Are there any side effects to turning off "import sequences natively"?

  • Download  resources that are not listed in the JNLP file

    There is some way to download resources that are not listed in the JNLP file, and then
    ask for them with DownloadService ? (isResourceCached)
    thanks.

    currently, the jnlp spec requires DownloadService to access only resources specified in the jnlp file..
    changing this is a proposed RFE for the next spec version:
    4908304: JWS DownloadService should not require mention in JNLP file
    /Dietz

  • ODI to delete those members which are not present in the source file

    Hi John,
    Using ODI we can delete members by using delete option in the Operation column
    Fine. I would like to delete members from planning which are not there in the source file.
    For e.g if my source file has members A1,A2,A3,and A4 and Planning outline has A1,A2,A3,A4,A5 and A6. I would like to delete only A5 and A6.

    Hi John,
    Its only a one time process. The issue is, we have to concatenate two segments of the COA into one dimension in Planning. But if we concatenate it creates a cartesian product which is not the requirement. Only a particula value of segment 1 are to be joined with segment 2.
    E.g Company 1 is to be joined with Cost center 1.
    Company 2 with Cost center 2
    Company 1 should not get joined with Cost Center 2 and Company 2 with Cost Center1.
    So when we use ERPI and load the first outline it creates all the possibilities of the concatenation. So we would like to delete the unrequired members. If we have the values of the required members in a file, I would like to delete the unrequired members in the planning hierarchy.
    So would like to use the NOT IN function

  • Generated Crystal Report PDFs are different on Windows server

    Post Author: present
    CA Forum: .NET
    Hi,
    I created Crystal Report template (with two columns on one
    page) inside VS 2005 on my Windows XP Professional machine.
    But there are formating problems on both XP and Windows
    Server machines:
    1) On Windows XP machine, I have to overlap the two columns
    on the page inside VS 2005 editor in order to generate
    correct PDF file (without overlap). How to fix the the
    overlapping problem in editor?
    2) On Windows 2003 server: After I put the template on
    Windows 2003 server that has no VS 2005 installed (only
    CRRedist2005_x86.msi was installed), the generated PDF has
    different font size and layout (such as page size, column
    overlap, etc).
    Do I have to install VS 2005 on server too? It is really
    frustrating that I have to print document generated on the
    server before I know if the template works fine or not.
    Any help is highly appreciated!

    Typically when you are seeing page formatting issues on different machines, it could be because of printer drivers (or lack of).  The reporting engine relies on the printer driver configured on the machine to provide information so that a page can be properly rendered.  If you designed the report on your dev machine which is using PrinterA and then deploy to another machine using PrinterB, the formatting could be off.  So make sure that the exact same printer driver is being used on these machines.  If your deployments are expected to go to different machines where you don't know what printer will be installed, then you will need to design the report such that it can be rendered as best as possible.  Another option is to check the "No Printer" option and this should render the report the same on any machine with any printer, but then you'll need to make sure you handle any scenarios where the user wants to print to the printer.
    If this is an ASP.NET application then permissions could play a part if the printer drivers cannot be accessed.  There are whitepapers on the BOBJ support site that have information on to configure CR to print reports in ASP.NET apps.
    -MJ

  • MS publisher 2010 to PDF using Adobe Acrobat X Pro produces outlines on some of my images that are not there on the publisher file!

    I am helping a client publish a book through Createspace. We are both using Windows 8 OS. She created her document in MS Publisher 2010. I made the necessary edits to her book, (111 pages) and saved it as a pdf for commercial printing. The resulting pdf puts lines on some of the images. (All the images are jpg format, but it only happens to some.) I have tried creating the pdf in several different ways including print to PDF, Save as PDF, and Save and Send Wizard for commercial printing. I have also tried deleting and reinserting the images. I don't know what else to try. Does anyone have any ideas.
    The image below shows what I mean. On the left is the Publisher File, on the right is the PDF.

    I agree with your statement; even for a particular document, if I choose to "Print on both sides" and then print again immediately after, "Print on both sides" will be deselected.
    However, I'm not sure what you're implying by you're statement. I'm asking precisely why this setting isn't sticky. Acrobat uses a non-standard printer dialog; in the usual dialog I can easily set a defualt duplex setting. I almost always want to print duplex. Why can't I do this by default in Acrobat?

  • Colors in FCP looks different than when playing in QT7

    The colors of the video's in FCP looks different than when playing back in QuickTime. I wonder if it can be a color management setting in FCP? I have the same problem when playing a clip in AE. I have two FCP machines, but only one of them is having this problem. Any ideas of what I can do to get the right colors back?

    Have you enabled Final Cut Studio Color Compatibility in the QT Player preferences?

  • Visited links in Google are not changing color. In Options Colors visited links are purple. Also, the "Allow pages to choose their own colors..." is checked

    I have been using Firefox for many years. In the past year the Google page has stopped showing visited links in another color. Options are normal. Links should change to purple when visited.
    This has been happening for a long time now. There have been several Firefox updates since then. Is it a problem with my system?

    Does this happen with other visited links as well?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    There are other things that need your attention.
    Your system details list shows that you have two Flash plugins.
    # Shockwave Flash 11.7 r700
    # Shockwave Flash 11.6 r602
    You should remove the older Flash 11.6 r602.
    See "Manually uninstalling a plugin":
    *https://support.mozilla.org/kb/Troubleshooting+plugins

  • I would like to transfer old reel-to-reel tapes to an iMac. There are different recordings on the left and right channel of the tapes. When I connect the tape deck to the Mac, I get one recording on the left, the other on the right speaker. What to do?

    I was about to transfer some music from a reel-to-reel machione to my Mac. There are different sound recordings on the left and right channels. When I connect with RCA cables and Y-connector, I hear one recording from the left speaker, another from the right side. How do I record only one side, but hear it from both speakers?
    Detlef

    You don't say what end, or connectors are plugged into what. I'm assuming the RCA connectors are on the reel-to-reel end. Since the tape has two different mono recordings, one on each track, you of course only want one at a time during playback. Otherwise, the Mac (or any recording setup) can only treat it as a stereo recording with the standard Left-Right tracks.
    1)  There are multiple ways to connect different types of cables to get a mono signal down to a stereo output at the Mac. Here's one way.
    2) Plug any RCA cable (single cable or stereo) into only the right or left RCA output of the reel-to-reel.
    3) On the other end of the RCA cable, plug in an adapter like this. That will feed the single RCA output into a mono 1/8" plug.
    4) Then plug that adapter into this. That turns the 1/8" mono signal into a "stereo" output with the same single track audio being fed to the Mac on both the left and right channels.
    5) Record either the left or right output of the reel-to-reel. Rewind the tape and switch the RCA connector on the reel-to-reel to the right channel (if you started with the left) and record that mono signal as stereo.
    Or, avoid all of this hardware mumbo-jumbo in the first place and do this:
    1) Record the audio just the way you have it. Two different recordings, one on each channel.
    2) Copy the audio recording to a new name and open it in your editor.
    3) Highlight the left track and copy/paste it into the right track. Presto! Mono recording of the left track on both channels. Save the recording.
    4) Repeat, only copy/pasting the right track into the left track and save the second recording.

  • DW looks different than in the tutorial (Was: Help!!)

    Hi,
    I'm trying to learn to use Dreamweaver CC…it's the first time I'm trying to realize a website. So I've installed the software downloaded from Creative Cloud and I've stared to follow the tutorials but the work area appears different and I don't have found the material mentioned in the first video to download (CSS template ecc…), so I'm stuck in front at the third tutorial with no possibilities to go on…that's very frustrating.
    I've also tried to find a manual, but no way…I losing a lot of time and I'm paying for that. I'm really upset…so I hope you can help me.
    Regards
    Paolo

    Thank you Ben...now I'm out for work...I'll send you the photo around 8pm
    Il giorno 08/mar/2015, alle ore 14:01, Ben Pleysier <[email protected]> ha scritto:
    Help!!
    created by Ben Pleysier in Dreamweaver support forum - View the full discussion
    but the work area appears different
    I can see what the work area looks like in the tutorial, but cannot see how that differs to yours. Please place a screen capture here so that we can see.
    I don't have found the material mentioned in the first video to download
    https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-7264755-737046/mine.png
    You can also download the cheat sheet for keyboard shortcuts.
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7264755#7264755 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7264755#7264755
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Dreamweaver support forum by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • I can't download tv shows or rented movies.  My iPad indicates that I have 1.3 GB available and even though the downloads are less than that, the movies and tv shows will not download and the message I get says I don't have enough available storage.

    Also, I bought additional storage but it shows up in iCloud and does not alleviate the need for additional storage for videos.  What can I do to get additional storage to download rented movies and tv shows?

    In General you need 2 to 3 times the Space of the Download File size.
    If you are getting the Not Enough Space  message... you will need to Delete items to create sufficent space

  • IMovie won't import from iPhoto (this is different than all the other post)

    Before you think, "Oh... this is the typical 'iMovie 7 isn't importing iPhoto movies' question" this isn't. I've looked through a ton of threads and questions trying to find something similar to this.
    Q: I have all my digital camera (Canon SD500 camera (not camcorder), no known compatibility issues with Apple) movies, which are in .AVI format, in iPhoto. iMovie is being weird as in it will only import SOME of my camera movies. For some events, it imports ALL the movies in. For some events, it won't import ANY of the movies in. For some events, it will only import SOME of the movies included in it.
    If someone responds, "Your camera is incompatible" OR "the file format isn't supported" they should have points deducted from their account because they didn't read anything except for the first sentence and decided I don't know what I'm talking about.
    Here's some interesting things that have happened:
    1) I found ONE event in question called "Wedding Pictures & Movies" that wasn't showing up in iMovie. The camera we took movies with has other movies in other events that have successfully been imported into iMovie. But anyway, I realized that for some programming languages (I don't know if this is true with iMovie, I doubt it) that the ampersand (&) sign is used in code and shouldn't be used in titling things. So I shortened the name down to "Wedding" and all the sudden (more like after iMovie asked me if I wanted to create the thumbnails for the movies), SOME of my movies were put into iMovie, not all.
    2) Upon realizing that either: the event name was too long OR the & sign actually did screw it up, I shortened another event in question from "Reception Pictures & Videos" to simply "Reception". Upon opening iMovie, it never asked to build the thumbnail library with movies from this "Reception" event that I did the exact same thing to as the "Wedding" event.
    3) I thought I would try and force iMovie to refresh the thumbnail database (or build thumbnails for another movie again) by taking another movie with said camera above, the same one that I've taken all the other movies with, and imported the movie into iPhoto. Upon opening iMovie, it asked me to build the thumbnail, but only did so for the movie that I just took.
    What could be going on that movies from the same camera aren't showing up in iMovie? I can understand other cameras, but these movies are all from the same camera. Some will show up while others will not? Does anyone have a clue what could be going on here?
    BTW, the movies have not been edited in any way. They are all still in the exact same format and everything since they were imported into iPhoto.

    Before you think, "Oh... this is the typical 'iMovie 7 isn't importing iPhoto movies' question" this isn't. I've looked through a ton of threads and questions trying to find something similar to this.
    Q: I have all my digital camera (Canon SD500 camera (not camcorder), no known compatibility issues with Apple) movies, which are in .AVI format, in iPhoto. iMovie is being weird as in it will only import SOME of my camera movies. For some events, it imports ALL the movies in. For some events, it won't import ANY of the movies in. For some events, it will only import SOME of the movies included in it.
    If someone responds, "Your camera is incompatible" OR "the file format isn't supported" they should have points deducted from their account because they didn't read anything except for the first sentence and decided I don't know what I'm talking about.
    Here's some interesting things that have happened:
    1) I found ONE event in question called "Wedding Pictures & Movies" that wasn't showing up in iMovie. The camera we took movies with has other movies in other events that have successfully been imported into iMovie. But anyway, I realized that for some programming languages (I don't know if this is true with iMovie, I doubt it) that the ampersand (&) sign is used in code and shouldn't be used in titling things. So I shortened the name down to "Wedding" and all the sudden (more like after iMovie asked me if I wanted to create the thumbnails for the movies), SOME of my movies were put into iMovie, not all.
    2) Upon realizing that either: the event name was too long OR the & sign actually did screw it up, I shortened another event in question from "Reception Pictures & Videos" to simply "Reception". Upon opening iMovie, it never asked to build the thumbnail library with movies from this "Reception" event that I did the exact same thing to as the "Wedding" event.
    3) I thought I would try and force iMovie to refresh the thumbnail database (or build thumbnails for another movie again) by taking another movie with said camera above, the same one that I've taken all the other movies with, and imported the movie into iPhoto. Upon opening iMovie, it asked me to build the thumbnail, but only did so for the movie that I just took.
    What could be going on that movies from the same camera aren't showing up in iMovie? I can understand other cameras, but these movies are all from the same camera. Some will show up while others will not? Does anyone have a clue what could be going on here?
    BTW, the movies have not been edited in any way. They are all still in the exact same format and everything since they were imported into iPhoto.

Maybe you are looking for