Colour themes tool 'checking for valid adobe id'

Anybody get this?
Any answers?
Adobe Chat appears to be down...
Thanks

... forgot to add that my adobe id is fine

Similar Messages

  • LabVIEW DSC 8.0 examples that deal with events check for valid timestamp.Why?

    Hi folks !
    There are examples that come with LabVIEW DSC 8.0 that deal with alarm events, In these examples - DSC Alarms Event Structure Support.vi contained in DSC Alarms Demo.lvproj, for instance - when an alarm event occurs, the code checks for a valid time stamp - 17:00:00.000 31/12/1975. I´m confused, can anyone help me understanding why it´s done?
    Thanks !

    Hello marc8470,
    Each Virtex 5 FPGA bank requires an external voltage reference.  The FlexRIO FPGA module provides this reference in the form of Vccoa and Vccob.  Because there are two voltage references available on the FlexRIO FPGA module, each Vcco reference is connected to 2 IO banks.  The Adapter Module Interface and Protocol chapter of the FlexRIO MDK manual has a table that indicates which GPIO banks are referenced to which Vcco reference.  The Vcco levels set in the general section of the adapter module configuration file are not used by the Xilinx compiler, but instead by the fixed FlexRIO logic to configure the external voltage references.  The IO standard constraints section of the adapter module configuration file is used during compile to configure the output drivers in the Virtex 5.  If the general VccoALevel and VccoBLevel values do not match the IO standard constraints, no error will occur during compile, but the hardware will not be configured correctly during runtime.  The logic families used by each general purpose IO (GPIO) line must match that of the Vcco levels set in the general section of the adapter module configuration file.  A mismatch in values could result to incorrect behavior or possible damage to the FlexRIO FPGA module or the adapter module. 
    In the future, please use the email address included in your NI FlexRIO Adapter Module Development Kit (MDK) User Manual to send your questions directly to the FlexRIO MDK support team.  This group has experience with specific FlexRIO MDK questions such as this one. 
    The FlexRIO MDK manual is designed to provide all of the information a hardware designer will need to create a FlexRIO adapter module.  National Instruments is always improving and working on new releases of the FlexRIO MDK.  Please feel free to use the support email address in the FlexRIO MDK manual to send me any feedback you have on the contents of the manual.
    Regards,
    Browning G
    FlexRIO R&D

  • Checking for valid (and working) address

    (sorry if i posted in the wrong forum... i didn't found any that suits better my problem)
    that's the question: i have a string and need to check if it's a valid host name/ip address and also check if it's up and running at the moment. to solve the host name, i have the following code:
    try {
    URL url = new URL(sURL);
    HttpURLConnection uc = (HttpURLConnection) url.openConnection() ;
    uc.setRequestMethod("GET") ;
    uc.connect();
    uc.getResponseMessage();
    catch (IOException ioe) {
    //wrong url/not working
    but it doesn't work with ip addresses. Someone suggested me to use InetAddress.isReachable(int), but it's only avaliable since Java 1.5, and i must use 1.4. Another way around would be to use InetAddress.get(Canonical)HostName(), but it may fail even with a valid ip address, and i can't allow that.
    can someone give me a hand?
    thanks!

    (sorry if i posted in the wrong forum... i didn't
    found any that suits better my problem)
    that's the question: i have a string and need to
    check if it's a valid host name/ip address and also
    check if it's up and running at the moment. to solve
    the host name, i have the following code:Easy - it isn't possible at all.
    If and only if you were to use ICMP (which you can't in 1.4 using just java) and if and only if the target computer responded to ICMP then you could use that.
    That is seldom very useful because generally one doesn't care if a computer responds to ICMP. What they need to know is if the computer is actually doing what it is supposed.
    For example if you have an http server, what you care about is if it is actually handling http requests. (The computer can be up and not handling http requests.)
    Not to mention of course that a host name requires that the DNS server respond to it first. And just because the DNS server is failing it doesn't mean that the target PC is failiing.
    But if you really want to do nothing but ICMP then you can use Runtime.exec() and an OS specific command (usually 'ping') to do just that.

  • LsIsDate not checking for validity correctly

    I am sure this problem has come up before but I couldn't find any discussions on this forum relevant to it. Basically I am using a text field to enter dates and validating it using LsIsDate. The problem is that dates that should not be valid are passing as valid and screwing up the forms execution.
    For instance:
    I am using
    <cfset NewLocale=SetLocale("English (Australian)")>
    <cfif NOT LSIsDate(attributes.strStartDate)>
       Some error code here
    <cfelse>
      <cfset attributes.StartDate = lsParseDateTime(attributes.strStartDate)>
    </cfif>
    The problem is that dates with huge year values ie. 3/4/20121 are considered valid even though LsIsDate is supposed to only accept year values up to 9999.
    Any work arounds for this problem would be hugely appreciated.
    Cheers
    Aden

    This is a case of the docs being wrong.  A date in CF is a java.util.Date, and that has a maximum year of [the size of a Long] - 1900, as demonstrated here:
    <cfoutput>#createObject("java", "java.util.Date").init(createObject("java", "java.lang.Long").MAX_VALUE)#</cfoutput>
    For me, this outputs:
    {ts '292278994-08-17 07:12:55'}
    So if I was to pass lsIsDate() a value of 3/4/292278994, that would be a TRUE result.  However using 3/4/292278995 (where I have overflowed the year) would be a FALSE result.
    CF is notably bad at converting [anything] to a date, as it is far far far too forgiving in what it will consider a date.  For example as far as CF is concerned "1,2" is a date (Jan 2 of the current year).  And this is obviously ludicrous: there is no sensible situation in which "1,2" might be considered a date.  So my advice is: don't even try to use these parsing and validation functions CF provides: they'll accept too many false positives.
    Instead, don't allow users to enter dates in these formats, instead have some manner of date-selection mechanism which passes the components separately and in a controlled fashion.  So like a calendar picker, or separate selects for yyyy, mm, dd.
    Another thing you could do is perform your own prevalidation.  If you want to only accept dates up to year 9999 (although how AD 9999 is any more likely to be valid data than 292278994 is questionable), then make sure the year part is <10000 before you decide to accept it.  That said, it would be strange for most apps that one would want any year... Are you as interested in what happened in the first century CE as you are the 37th century CE?  Or is it more likely going to be a range within a human or business lifetime?  It depends on the app, sure, but in general I think +/- 100 or so years would be more likely what one would want.  And for a lot of purposes, a far narrower range than that.
    Adam

  • Skype error: "Can't start video renderer. Check for valid DirectX installation."

    Skype no longer provides picture of my contact and gives the above error message.

    Do you have a HP webcam? If so, see this article:
    [http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02639369&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN Can't start video renderer. Check you've got a valid DirectX installation]

  • I have run the 3.6 upgrade, but everytime I open it I get a warning message saying I am running an older version do I want to upgrade? When I check the version in the help menu it is 3.6 and tools/check for updates says I am on most recent version??

    when I said 'every time i open it' i meant 'open firefox browser'!

    This can happen if you have an incorrect user agent string (identifies the version of Firefox). Some add-ons modify the user agent string causing it to show an old version of Firefox even if you have the latest version installed.
    Your user agent string is "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 3.5.30729)"
    It is reporting that you have Firefox 3.5.3
    As you are using Firefox 3.6.13 you need to reset the user agent string so that it will correctly identify the version of Firefox that you have installed, for details of how to do that see https://support.mozilla.com/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser

  • Checking for valid (and working) host name/ip

    hi
    i have posted this in other topic, but i think it was the wrong forum... so if you wanna try to help me...
    http://forum.java.sun.com/thread.jspa?threadID=603987

    no that was the right forum, although it gets low traffic. This is not the right forum for that quesiotn. Your best bet is the "Java Programming" or "New To Java" forums.

  • Check for Updates 9 - X

    I am curious to know ...  if Reader X is the current version, why it does not appear when I do "Check for Updates" from Reader 9.4.1.  I support many users and usually tell them to check for updates, but in this case, they will not even know there is a newer version available.  Thanks.

    Hi g.piper
    As Bernd mentioned, Adobe Reader X is a completely new version of the software requiring its own installation.
    To install Reader X, please visit http://get.adobe.com/reader/ to download the new installer.
    In case you choose to stick with Reader 9, security related updates will likely continue for some time, however feature-related patches will no longer be released.
    Thanks,
    David Kastendick

  • Can I exit from paintComponent?  ...or... how can I check for invalid data?

    I'm writing a calendar applet for a programming class and I've nearly completed it but I'm stuck at checking for valid data.
    What seems to be happening is that paintComponent() is being called before actionPerformed.
    In actionPerformed (when they click the button), it checks to make sure they entered a valid month (1 to 12). If the didn't it dispalys a message, but if they did it calls repaint().
    But even if repaint() isn't called, Java still seems to call it before actionPerformed and I get exceptions.
    So I tried checking inside of paintComponent() by using a simple if(...) return; but that doesn't seem to do anything... it just keeps going through with the method.
    So -- Once the user presses my button I want to make sure the data is valid before repainting the screen. How can I do this?

    I validate it in actionPerformed which is called by
    the action listener... that is what you meant right?
    The problem is that it seems paintComponent() is being
    called before I can validate the data with
    actionPerformed(). I need to stop paintComponent()
    from always being calledMVC. (Model, View, Controller)
    Initially the internal value of the data (the model) should be valid (or null with a check in the paintComponent method)
    paintComponent (the view part) shows the state of the valid data.
    You press the button.
    actionPerformed is called (the controller).
    It checks the value and, if valid, writes it to the data (model), then updates the view.
    At no point will the view have to render invalid data, because the model is only updated after actionPerformed checks the value.
    The pattern may be applied with different classes performing the three roles, or different methods in the same class (sometimes it's easier that way for simple cases).
    Pete

  • Check for zero

    I am looking for a way to check input fields for zero values in my action listener and bring up a message dialog if it finds one. I can get it to look for null or alpha characters but I can't figure out how to look for zero. Any suggestion would be appreciated. My action listener code is below...
    public class MyActionListener1 implements ActionListener
        double newAmount;
        double newRate;
        double newTerm;
        // Tell the JButton (calcButton) what to do when clicked.
        public void actionPerformed(ActionEvent evt)
            try
                AbstractButton calcButton = (AbstractButton)evt.getSource();
                newAmount = Double.parseDouble(principleValueText.getText());
                newRate = Double.parseDouble(rateAPRText.getText());
                newTerm = Double.parseDouble(termYearsText.getText());
                pmtText.setText(nf.format(getMortgagePmt(newAmount, newTerm, newRate)));
                pmtText.setForeground(Color.red);
                principleValueText.setText(nf.format(newAmount));
                rateAPRText.setText(np.format(newRate/100));
                termYearsText.setText(ni.format(newTerm));
            // Privide error handeling to check for valid input.
            catch(NumberFormatException nfe)
                JOptionPane.showMessageDialog(null, "The value must only contain digits",
                                                          "Input Error", JOptionPane.WARNING_MESSAGE);
    }

    I don't quite understand your problem, but I think what you're saying is that if any of the parsed numbers are 0, you want to show a dialog box that says you can't have "0" values?
    There are two ways to do this: after parsing each number, you can just simply use the block:
    if(number == 0){
        JOptionPane.showMessageDialog(null,"...","...",...);
    }You can call the JOptionPane methods whenever you want to in your program.
    Now, another way of doing this, though kind of like over kill, you can use a block like this:
    if(number == 0)
        throw new IllegalArgumentException("Number cannot be 0!");and then after your catch(NumberFormatException) block put:
    catch(IllegalArgumentException iae){
        JOptionPane.showMessageDialog(null,iae.getCause(),"Error",JOptionPane.ERROR_MESSAGE);
    }or something to that effect. once again, second solution is kind of overkill, but it would work (and stop the execution of the rest of the method)
    If I completely understood your problem, I'm sorry =D
    Alex

  • My MacBook Pro is running VERY slow. I am constantly getting pop-ups and now I got one that says my computer may be infected. What do I do to check for viruses and or remove them if there is one?

    What do I do to check for viruses and or remove them if there is one? I have never had a problem with my mac until now. It is running VERY slow

    This is what it came up with.... any ideas?
    EtreCheck version: 1.9.11 (43) - report generated May 27, 2014 at 11:07:36 PM CDT
    Hardware Information:
              MacBook Pro (15-inch, 2.53GHz, Mid 2009)
              MacBook Pro - model: MacBookPro5,4
              1 2.53 GHz Intel Core 2 Duo CPU: 2 cores
              4 GB RAM
    Video Information:
              NVIDIA GeForce 9400M - VRAM: 256 MB
    System Software:
              OS X 10.9.3 (13D65) - Uptime: 1 day 23:26:50
    Disk Information:
              Hitachi HTS545025B9SA02 disk0 : (250.06 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 249.2 GB (20.75 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-868 
    USB Information:
              Apple Inc. Built-in iSight
              Apple Internal Memory Card Reader
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
    Gatekeeper:
              Anywhere
    Kernel Extensions:
              [not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.39) Support
              [not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.39) Support
    Problem System Launch Daemons:
              [failed] com.apple.wdhelper.plist
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist Support
    User Launch Agents:
              [loaded] com.adobe.ARM.[...].plist Support
              [loaded] com.macpaw.CleanMyMac.helperTool.plist Support
              [loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
              [loaded] com.macpaw.CleanMyMac.volumeWatcher.plist Support
              [running] com.whitesmoke.uploader.plist Support
    User Login Items:
              iTunesHelper
              AdobeResourceSynchronizer
    Internet Plug-ins:
              JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
              FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
              Default Browser: Version: 537 - SDK 10.9
              AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
              AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
              Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
              QuickTime Plugin: Version: 7.7.3
              Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
              iPhotoPhotocast: Version: 7.0
    Safari Extensions:
              WhiteSmoke: Version: 1.0.0.1
              Vidx: Version: 2.0
              DivX Plus Web Player HTML5 <video>: Version: 2.1.2.145
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
              Move-Media-Player: Version: npmnqmp 071801000001 Support
              fbplugin_1_0_1: Version: (null) Support
    3rd Party Preference Panes:
              Flash Player  Support
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                  12%          DashboardClient
                   6%          coreaudiod
                   6%          WindowServer
                   5%          repair_packages
                   3%          VLC
    Top Processes by Memory:
              549 MB          repair_packages
              143 MB          com.apple.WebKit.WebContent
              131 MB          Safari
              119 MB          installd
              94 MB          mds_stores
    Virtual Memory Information:
              809 MB          Free RAM
              1.82 GB          Active RAM
              224 MB          Inactive RAM
              630 MB          Wired RAM
              3.66 GB          Page-ins
              207 MB          Page-outs

  • I have a license for all adobe files but recently i had a virus and all my files were deleted.Now when i want to have them back with my redemption code it says that i cannot use it anymore.But my license is not expired.How do i get my files back??

    i have a license for all adobe files but recently i had a virus and all my files were deleted.Now when i want to have them back with my redemption code it says that i cannot use it anymore.But my license is not expired.How do i get my files back??

    Your redemption code was used to acquire an activation code.  The activation code is what you need to use when you want to reinstall/enable the software again.  Check your Adobe account online to see if the number(s) can be found there.

  • Health Check Error: Dependency$ p_timestamp mismatch for VALID objects

    Just before the upgrade when we ran the health check we got the following 8 errors and want to fix them.
    Dependency$ p_timestamp mismatch for VALID objects
    [E] - P_OBJ#=5015556 D_OBJ#=5015647
    [E] - P_OBJ#=5015556 D_OBJ#=8432965
    [E] - P_OBJ#=5015576 D_OBJ#=5015647
    [E] - P_OBJ#=5015576 D_OBJ#=8432965
    [E] - P_OBJ#=5015588 D_OBJ#=5015647
    [E] - P_OBJ#=5015588 D_OBJ#=8432965
    [E] - P_OBJ#=5015589 D_OBJ#=5015647
    [E] - P_OBJ#=5015589 D_OBJ#=8432965
    SELECT o.obj# d_obj, do.name d_name, do.type# d_type, po.obj# p_obj, po.name p_name, to_char(p_timestamp,'DD-MON-YYYY HH24:MI:SS') "P_Timestamp",
    to_char(po.stime ,'DD-MON-YYYY HH24:MI:SS') "STIME", decode(sign(po.stime-p_timestamp),0,'SAME','*DIFFER*') X FROM sys.obj$ do, sys.dependency$ d, sys.obj$ po WHERE
    P_OBJ#=po.obj#(+) AND D_OBJ#=do.obj# AND do.status=1 /*dependent is valid*/ AND po.status=1 /*parent is valid*/ AND po.stime!=p_timestamp /*parent timestamp not match*/ ORDER BY 2,1;
    8432965 AQ$_KUPC$DATAPUMP_QUETAB_P 2 5015576KUPC$_API_ACK09-DEC-2009 14:01:28 29-NOV-2010 12:04:14*DIFFER*
    8432965 AQ$_KUPC$DATAPUMP_QUETAB_P 2 5015589KUPC$_MASTERJOBINFO 09-DEC-2009 14:01:28 29-NOV-2010 12:04:14*DIFFER*
    8432965 AQ$_KUPC$DATAPUMP_QUETAB_P 2 5015556KUPC$_LOGENTRIES 09-DEC-2009 14:01:27 29-NOV-2010 12:04:13*DIFFER*
    8432965 AQ$_KUPC$DATAPUMP_QUETAB_P 2 5015588KUPC$_MASTERERROR 09-DEC-2009 14:01:28 29-NOV-2010 12:04:14*DIFFER*
    5015647 KUPC$DATAPUMP_QUETAB 2 5015576KUPC$_API_ACK 09-DEC-2009 14:01:28 29-NOV-2010 12:04:14*DIFFER*
    5015647 KUPC$DATAPUMP_QUETAB 2 5015589KUPC$_MASTERJOBINFO 09-DEC-2009 14:01:28 29-NOV-2010 12:04:14*DIFFER*
    5015647 KUPC$DATAPUMP_QUETAB 2 5015556KUPC$_LOGENTRIES 09-DEC-2009 14:01:27 29-NOV-2010 12:04:13*DIFFER*
    5015647 KUPC$DATAPUMP_QUETAB 2 5015588KUPC$_MASTERERROR 09-DEC-2009 14:01:28 29-NOV-2010 12:04:14*DIFFER*
    Solution as per the 579256.1's is
    The returning objects will have to be recompiled or recreated to clear the problem.
    Please see Note 781959.1 to recompile them. This can cause problems during upgrade and PLSQL validation.
    But in my case above objects are not synonyms and are of type=2.
    So, not sure how to fix them. pl. let us know how we can fix these errors.

    Well, I can tell you that this kind of error is not OS related, but rather a HW thing.  It happens where there is a general detection of something going wrong.  Sometimes it can happen randomly and might not be an indication of a problem.  But sometimes it can be caused by things that are improperly functioning within the system like bad capacitors. 
    Unfortunately I don't really know what to do about such things except give you machine a proper inspection.  But if things are working fine, and continue to do so, I wouldn't worry about it.  If it becomes a regular occurance, then I'd worry.

  • Which Adobe Creative Cloud tool is for designing or editing fonts/glyphs?

    Adobe's "Adobe Font Development Kit for OpenType" (AFDKO) documentation states that "AFDKO is for adding OpenType data to existing fully-designed PostScript and Truetype fonts, and for proofing them. It does not offer tools for designing or editing glyphs."
    Which Adobe Creative Cloud tool is for designing or editing fonts/glyphs?

    I do not know about Adobe tools for font development, but here (http://www.fontlab.com/) you may find resources for what you are looking for...

  • My kuler window isn't working says that is verifying for a valid adobe id

    How can I fix my kuler window? It looks that is downloading something but also says that is verifying for a valid adobe id

    I had the same problem. Try updating the software. That should solve the problem. Just know that they renamed Kuler to Color Themes and you can find that under the Window drop down.

Maybe you are looking for