LabVIEW DSC 8.0 examples that deal with events check for valid timestamp.Why?

Hi folks !
There are examples that come with LabVIEW DSC 8.0 that deal with alarm events, In these examples - DSC Alarms Event Structure Support.vi contained in DSC Alarms Demo.lvproj, for instance - when an alarm event occurs, the code checks for a valid time stamp - 17:00:00.000 31/12/1975. I´m confused, can anyone help me understanding why it´s done?
Thanks !

Hello marc8470,
Each Virtex 5 FPGA bank requires an external voltage reference. The FlexRIO FPGA module provides this reference in the form of Vccoa and Vccob. Because there are two voltage references available on the FlexRIO FPGA module, each Vcco reference is connected to 2 IO banks. The Adapter Module Interface and Protocol chapter of the FlexRIO MDK manual has a table that indicates which GPIO banks are referenced to which Vcco reference. The Vcco levels set in the general section of the adapter module configuration file are not used by the Xilinx compiler, but instead by the fixed FlexRIO logic to configure the external voltage references. The IO standard constraints section of the adapter module configuration file is used during compile to configure the output drivers in the Virtex 5. If the general VccoALevel and VccoBLevel values do not match the IO standard constraints, no error will occur during compile, but the hardware will not be configured correctly during runtime. The logic families used by each general purpose IO (GPIO) line must match that of the Vcco levels set in the general section of the adapter module configuration file. A mismatch in values could result to incorrect behavior or possible damage to the FlexRIO FPGA module or the adapter module.
In the future, please use the email address included in your NI FlexRIO Adapter Module Development Kit (MDK) User Manual to send your questions directly to the FlexRIO MDK support team. This group has experience with specific FlexRIO MDK questions such as this one.
The FlexRIO MDK manual is designed to provide all of the information a hardware designer will need to create a FlexRIO adapter module. National Instruments is always improving and working on new releases of the FlexRIO MDK. Please feel free to use the support email address in the FlexRIO MDK manual to send me any feedback you have on the contents of the manual.
Regards,
Browning G
FlexRIO R&D

Similar Messages

Why would a vi that deals with xl become broken during an executable build?

Why would a vi that deals with excel spreadsheet become broken during an executable build? Excel vi's fine in soft copy. But during executable build the vi's dealing with opening an excel spredsheet (open specific workbook and set cell value) become broken.

You have to include some dynamic files while building your executable. The files are listed on the Report Generation Toolkit CD. I believe it is _excelsub.llb, but am not sure.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Error while using BAPIs that deals with DMS

Hi everybody,
We are developing a portal with Web Dynpro and trying to call from our java code BAPIs that deals with DMS:
BAPI_DOCUMENT_CREATE2 - to create a new DMS document and checkin an original.
CVAPI_DOC_CHECKIN - to checkin an original to an existing DMS document.
CVAPI_DOC_CHECKOUT - to checkout an original from the DMS.
While using other bapi's that deals with DMS but do not deals with originals (like creating a new document, retrieving metadata about documents and originals) we don't have any problem.
Only when trying to checkin or checkout originals we get the following message (from the DMS?): RFC_START_PROGRAM
the full message is: com.sap.aii.proxi.framework.core.BaseProxiException:RFC_START_PROGRAM error key:RFC_ERROR_PROGRAM.
does anybody knows the meaning of this message?
by the way - those BAPIs works well while called from the R/3. only when we call them from the portal we have this problem.
thanks for any information, Adi.

Hello,
BTW, You have BAPIs for Doc. checkin and checkout.
BAPI_DOCUMENT_CHECKIN
BAPI_DOCUMENT_CHECKIN2
BAPI_DOCUMENT_CHECKOUTSET
BAPI_DOCUMENT_CHECKOUTSET2
Can you use these and give a try?
You have a detailed documentation maintained for these BAPIs.
Hope this helps you.
Best Regards, Murugesh AS

[svn:osmf:] 13914: 1. Fix a bug that deals with discontinuity of fragments.

Revision: 13914
Revision: 13914
Author:   [email protected]
Date:     2010-02-01 16:02:58 -0800 (Mon, 01 Feb 2010)
Log Message:
1. Fix a bug that deals with discontinuity of fragments. This is the first check in of the fix. More extensive testings may discover other issues.
2. Apply a patch from Matthew, quoted from Matthew's email:
This one should pick up ?\226?\128?\156play now can take a starting offset?\226?\128?\157, stubs out ?\226?\128?\156play for duration?\226?\128?\157, and also picks up ?\226?\128?\156data messages are lost during enhanced seek?\226?\128?\157.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/HTTPNetStream.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/AdobeFragmentRunTable.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/HTTPStreamingF4FIndexHandler.as

Thanks.
I actually figured a better solution which was putting the fix right into VASTTrackingProxyElement.as so that VAST2TrackingProxyElement.as just inherits it, since I saw same issue with VAST1 ads as well!
Cheers,
mark

[svn:bz-trunk] 18821: Check-in a minor fix that deals with a missing MessageBroker class ( this could happen in Java/Android clients).

Revision: 18821
Revision: 18821
Author:   [email protected]
Date:     2010-11-26 07:33:24 -0800 (Fri, 26 Nov 2010)
Log Message:
Check-in a minor fix that deals with a missing MessageBroker class (this could happen in Java/Android clients).
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/MessageException.java

I see some message about a proxy. Have you checked that you can use the proxy from you network?
If not you should turn the proxy off.
Timo

API that deals with domain

We are trying to migrate C++ application to JAVA. I need to find out JAVA api that deals with domain, such as list of user(group) name under one domain, list of all domain controllers...
Under C++ world, it would be NetUserEnum, NetServerEnum...
thanks in advance

Not sure if this is what you are looking for , but give it a look. ..
http://java.sun.com/products/jndi/overview.html
http://java.sun.com/products/jndi/tutorial/

My ipad 4th gen 32gb keeps crashing everytime i use a app that deals with a map?

I updated my ipad 4th gen 32gb to iOS 7 and since then anytime i use a app that deals with a map it crashes for instance find my iphone, find my friends and the built in map app on the ipad. I restored the ipad when it first started happening and its still doing it. I do the soft reset and it seems to do not a thing to help out the matter. The first time it happened i was using my built in map app and the ipad started crashing and wouldnt stop, it went on for like 3 hours kept turning on and turning right back off when it turned back on and it would do that for the whole 3 hours it probably crashed and turned back on 200 times. I had to do a command reset using itunes on my macbook pro to get it to stop doing it and ive not used the map app since because of it. So recently ive used find my friends and find my iphone and it would crash my ipad once and when it came back on it wouldnt crash again so i would just go and kill the app that caused it to crash.

I restored my ipad as a new ipad deleted all the backups for the ipad from my itunes and then set it up as new and put all my photos and music and apps back the way they was and i havent really messed with the apps with maps in it but the crashing is still happening and its happening inside the settings app id love if someone could help me out its starting to get pretty annoying. Thanks.

Mm issue:-how to deal with gds sent for repairs and again issued for consm

The main problem is that if something come for repairing it increase the stock for one period and decrease the R and M for that period. And when after 4 months when goods are received after repairing it disturbs the R and M expense in another period. And this also disturbs the valuation of the material.
Any one can suggest how to deal with the repairs done to materials without affecting the valuation price of original material.
my points is how everyone in india is dealing with goods sent for repairs outside their company.
what all entries are generated from first receipt of goods in company till good sent for consumption after received from vendor who repaired the goods.
all a/c and mm entries

what we have decided that we would have 2 valuation type
1. sap-domestic :- normal stock
2. sap-use/repair :- repaired items.
All the goods should be received using sap-domestic valuation. from here goods are sent to shop floor. when ever repair is required goods are received in stock thru sap-use-repair at value zero and not moving price specific to sap-use/repair valuation.
so till goods that require repair and that already repaired are kept in stock, they are kept at 2 different values one is zero and other is moving price specific to valuation type sap-use/repair.
now goods are sent for repair at zero value but when these goods are received after repair then value of repair will affect the moving price of valution sap-use/rep.
so this will solve our problem that goods should be received from shop floor to stock for repair at value zero.
how can we achieve this that goods received from shop floor to stock for repair is received at zero value and not moving price specific to valuation sap-use/rep. where we will have do setting in this vaution type or wherever required.
pls send some suggestions on it

TS2834 I've been using the mail app that came with my Mac for over a year. Out of the blue, it will not open and keeps saying "Mail cannot open because of a problem" and something about not being compatible ??? Help! I miss my mail

I've been using the mail app that came with my Mac for over a year. Out of the blue, it will not open and keeps giving me an error like "Mail cannot open because of an error and something about it not being compatible. Please help! I miss my mail

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

I'm trying to download songs that was transferred via Carbonite, not getting message that states "Unable to check for available downloads, iTunes is temporally unavailable"

I'm trying to download songs that was transferred via Carbonite, not getting message that states "Unable to check for available downloads, iTunes is temporally unavailable". What do I do? Any suggestions??

Same problem, I have a season pass for Mad Men and suddenly cannot download, says iTunes is temporarily unavailable. Problem occurred before I updated to the new iTunes and afterwards, on two different computers. Here is what Apple had to say:
"I have verified that the iTunes Store is functioning and accepting connections, which indicates that the issue is related to your internet connection, local network, or your local computer itself. This article outlines some of the likely culprits:
http://support.apple.com/kb/TS1368
Apple Discussions are another source of information about iTunes, where everyone from new users to professionals can interact and share their knowledge and experiences. You may find another user with the same operating system or ISP that may be able to help resolve this issue. You can find the iTunes discussions group at:
http://discussions.apple.com/category.jspa?categoryID=149
If you are still unable to connect to the iTunes Store or receive this error, you will need to call our AppleCare technical support team. A representative will be able to tell you about Apple's complimentary and fee-based support options and can help you determine which option might be most helpful in this case. To find the appropriate phone number, please visit:
http://www.apple.com/support/contact/phone_contacts.html"
so far, no luck.

HT201412 My iPhone will not respond even once it is hooked to iTunes nor will it respond when I hit the power (reset) button. The screen mentions that the system is checking for "borrowed blocks" (small writing in the top right corner).

My iPhone will not respond even once it is hooked to iTunes nor will it respond when I hit the power (reset) button. The screen mentions that the system is checking for "borrowed blocks" (small writing in the top right corner).

Are you using the charger and cable that came with the phone?
Are you using an unauthorized third party charger?

Every time I open my imovie app on my computer it always closes. can someone tell me why it does that? i already checked for updates but there is none.

Every time I open my imovie app on my computer it always closes. can someone tell me why it does that? i already checked for updates but there is none.

I would suggest trashing your iMovie Preference file. Complete instrucitons are here.
https://discussions.apple.com/docs/DOC-4061

What r the conditions that u hav to check for automatic invoice split ( fro

what r the conditions that u hav to check for automatic invoice split ( from order to proforma invoice)

You can find out the exact fields which lead to invoice split in the Data VBRK/VBRP field of copy control between the order and the invoice type at item category level.
Find out this routine.
Go to VOFM tcode and Data transfer-----Billing documents
Here you can see the routine. See the code behind this routine. This will give you the exact criteria used for invoice split in your specific case.
By default,
It is payer, payment terms, incoterms, Billing date
Hope this helps.
Reward if this helps.

Error -10609 -- even with example that ships with LV 7.0

I'm getting error -10609 ("A transfer is already in progress for the specified resource...") at AI Control from the error out cluster of AI Start. I tried running the example called Cont Acq&Graph (buffered).vi that ships with LabVIEW 7.0, and I get the same error at the same place, so I know it's not my code. I also tried rebooting the computer and power cycling the hardware, and the error still shows up on the very first attempt to run. I have no other processes running.
I have multifunction DAQ PCI-6052E and an SCXI-1001 chassis with 2 SCXI-1100 modules and 2 SCXI-1102 modules.
Any suggestions or advice would be greatly appreciated. Thanks in advance!

Hi Iflash,
This error will sometimes occur during debugging of a data acquisition program. What happens is that when you start an operation and then terminate the program prematurely using the Abort button the process could still be running on the DAQ board.
The best way to avoid this is to reset the board. There are several ways to do this. The easiest is to run the Device Reset VI in LabVIEW. You will just need to wire up the device number and run the VI. Another option is to go into Measurement & Automation Explorer (MAX) and run the test panels on the device. It will error the first time but if you close the test panel and run it again it should be fine. Finally, in MAX 3.0, there should be a Reset button that you can access from the Devices and I
nterfaces >> DAQmx devices.
Anyway, hope that helps. Have a good day.
Ron

What's the deal with 7:22 For iCal and iPhoto

Ok, so I'm having this problem where on every single saved picture or document the "Get Info" tab shows it as being created at either 7:22 AM or 7:22 PM. Also, all of my events on iCal show up automatically as happening at 7:22 when I select the "Show Time in Month View" option under Preferences. Any ideas?..

Sure. Once you open Terminal, you will be presented with a shell prompt. The "shell" is what's running inside the terminal, and is what processes the commands you type in. Common shells are sh, bash, zsh, csh, tcsh. You are probably running bash by default. For you, it really doesn't matter what shell you are running.
Your prompt will probably look similar to this:
<machine name>:~ <username>$
where <machine name> is the name of your machine, and <username> is the name you logged into your system with. So for me, this looks like:
tomservo:~ glsmith$
So, at this prompt, I wanted you to type:
cp gradparty.jpeg ~/Desktop/testpic.jpeg
The "cp" is a program that copies files. That invocation says "copy file gradparty.jpeg to a new location located in the user's home folder, in the sub-folder called Desktop, and rename it to testpic.jpeg". Note that I used a shortcut -- in Unix, the "~" stands for the home directory (aka folder) of the user issuing the command. It's a quick way to get rooted to your home folder without having to type the full path.
Another thing to note is that the above command assumes that you are in the folder that contains the file "gradparty.jpeg". To get there from the Terminal, you will have to use the "cd" command. For example, let's say I have this image in a sub-folder called Graduation inside my Pictures folder. From the Terminal, I could get there by typing:
tomservo:~ glsmith$ cd Pictures/Graduation
and I could verify that the image is there by then typing:
tomservo:~ glsmith$ ls -l gradparty.jpeg
"ls" is what lists files in a directory (similar to "dir" in Windows).
So, once you've done the copy, you will have a new file sitting on your Desktop. This is what I want you to look at in the Finder to see if the times are still messed up.

LabVIEW DSC 8.0 examples that deal with events check for valid timestamp.Why?

Similar Messages

Maybe you are looking for