Column Width Size

Hi All,
I have table formate report. .
E.g
Column Header Name like below
Agent Name (Single row) should be spilit like below
Agent
Name
How to set column width size
i tried below option but not replicated my report.
Column Properties-->style-->Additional Formatting Options change the width
Width:10 Height:0
Lpad:0 Rpad:0
Thanks

Balaa wrote:
Hi,
Try the below for your column heading.
"Agent &nbps; Name"
Thanks,
Balaa...Hi..When I use this...
My column in report when run..shows the same "Customer &nbps; Name"
Please help.

Similar Messages

  • MMBE column width

    Hi experts,
    I have a problem with the new ECC6 MMBE screen.  We have set our columns so that we can see certain types of stocks, but when there is a stock that has the deletion indicator assigned a specific location, this "Del. Flag"  becomes the first column and knocks off my last column from the screen.  I have tried a right click on the column that shows me an Optimize width option but this seems to be not working.
    If I resize the columns they go back to standard the next time I use the MMBE T-Code?
    Would any have a solution as to hold the Column Width Size?
    Thanks Frank

    Check this link...
    How to change column width of an interactive report?
    Thanks,
    Machaan

  • How can i Auto Size the Column width in RDLC Report

    Hi Friend's,
    I have created Windows application with RDLC Report. I am binding(Generating) dynamic columns and data's in RDLC Report Using Matrix control, I need to make Auto size of Column width for each Column in
    Matrix of RDLC report. So Can any one suggest me to make the Auto Size of Column Width in RDLC.
    Thanks in Advance,
    Mohan G

    Hi Mohan,
    In Reporting Services, the column width/height is hard-coded, hence, we cannot set the column width/height dynamically or based on an expression. So is the report size.
    In addition, since it is a RDLC report, we need a ReportViewer control to display this report within a custom application. If you need to change the size of the whole report, we can set the AsyncRendering property of the ReportViewer control to false, and
    set the SizeToReportContent property to true.
    Regards,
    Mike Yin
    TechNet Community Support

  • How to increase size of individual column width in the filter screen of WAD

    Hello all ,
    Have a web application built in WAD. I have ran it  in portal and want to put the filter on material.When the filter screen displayed , I selected the filter value on material and added it to selections.  I am not able to see the full description of the material due to the width of the column is less which is hided to drag. Do we have any option to increase the individual column width in filter screen?
    Request you to respond .
    Regards,
    Lakshmi.

    Hi Vijay,
    Iam doing fine .Thank you.
    We tried different options in WAD . still it is not working . once the filter screen displayed in your report result (Portal) ,it will show you two tabs screen , will select and transfer the selections from left had side to right hand side.iam able to drag the left tab but not the right one due to iam not able to see the full description of info object.By dragging we can increase the full screen size but not the individual tab size.
    Regards,
    Lakshmi.

  • What is the best column width & font size for an ipad magazine

    I'm creating a magazine that will be shown on the ipad I was wondering what is the best column width and font size to use. If someone has any suggestions I'd love the help.
    thanks,

    You should know how you publish it and what the technical limitations of each type are.
    No one can or will give you any advise to use this or that font. Make several drafts, try it, pass on several drafts to testers and get response.
    If you work with styles, it is then easy for you to change it to the best result with a few clicks.
    Normally a column width with 37 to 45 letters I would personally suggest to be the best width, but opinions are very different on it. The more letters in a line the less readability is given, the less letters the more difficulty you will have to get an even grey factor. (I mean that through space between words some lines become bright others dark, which does not look so fine, I don't know the English technical term for that.)

  • How to size JTable Column width?? Need help

    Using the following logic to size column width, but only the 1st column is sized. How can I get the other columns sized??
    int widthsSummary[] = {340,60,150,60,60};
    for (int i=0; i<1; i++)
    column = getScrollPaneTableSummary).getColumnModel ().getColumn(i);
    column.setMinWidth(widthsSummary);
    column.setMaxWidth(widthsSummary[i]+50);
    column.setPreferredWidth(widthsSummary[i]);          

    First, take a look at your for loop
    for (int i=0; i<1; i++)i starts at 0 and cannot be equal to or greater than 1. This loop will only occur once, when i = 0.
    Second, take a look at your set...Width calls
    column.setMinWidth(widthsSummary);
    column.setMaxWidth(widthsSummary+50);
    column.setPreferredWidth(widthsSummary); widthsSummary is an array. You need a number to set widths. Try ...set...width(widthsSummary);
    Hope that helps.

  • Auto size column width in repor generation toolkit

    Im using RGT for excel creating tables i excel i wan to auto size the column width automatically.how to do this?
    kavi

    Basically everything you want to do needs to be done with ActiveX. The Report Generation Toolkit does just that. If there's something you need to do that the RGT doesn't do, then you need to use Excel's object model to call the properties and methods to do what you want. This information is in the Excel documentation, not the LabVIEW documentation. Examples ship with LabVIEW on how to use ActiveX to control Excel. There have also been tons of examples posted on this forum on various operations on Excel. Search and you will find them. There are also lots of examples in the Excel thread.
    Message Edited by smercurio_fc on 08-30-2009 09:18 AM

  • Auto re-size column widths?

    Hi-
    is there a way to have the finder window columns always open up to a width that allows the longest file name to display in full? I'm tired of re-sizing my column widths every time I switch folders (which I do a lot) so I can read my file names.
    thanks,
    l

    I have the opposite annoyance: I want my columns to all be the smallest possible width. However, Column view always opens at a default width (which makes neither of us happy, as it is neither wide enough to display all names, nor is it at the smallest size). One thing you can do is hold the option key when you get to a column that has a long name and double click the little lines at the bottom of the column divider. All open columns will then expand to the width necessary to display the longest names. However, subsequent columns revert to the default width--thus if you go back up to the root level and select a new folder, that column is still "fat" as is the second column, but the next column will be default again. If you hold the option key and drag the column width || handle, all columns expand (or contract) and it seems this width remains even when you go back up and down the tree. Of course, once you close the window you are back to square one.... I know of no way to set a default width that you prefer.
    Francine
    Francine
    Schwieder

  • JTable sum of column widths table size prob

    Hi there,
    At the moment I've encountered a problem with JTable (it may be a feature?) that I can't seem to work around.
    The problem is that I've got a JTable with a custom background color for the top row of cells. The problem is that the column widths are editable and if the user makes the last column narrower, than the background color of the top row bleeds into the background panel.
    I'll try to make a small app displaying the problem, if anyone has ideas though or understands what I'm talking about I'd definitely appreciated any advice.
    Thanks,
    eknight

    The problem is that I've got a JTable with a custom background color for the top row of cells. The problem is that the column widths are editable and if the >>user makes the last column narrower, than the background color of the top row bleeds into the background panel.It is difficult to say what you mean by the color bleeding. Because if you are using/overriding the tablecellrender to achieve the background coloring, it should be taken care off automatically.
    Post a Short, compilable piece of code

  • In Sales Order changing the column width to see all item desciption?

    When in the sales order screen .
    Expand the column width of say the item description.
    How do I save the column width for all the sales documents  for the field item description in sales order ?

    Hi,
    The column width of the Document will be defaulted to the same size at which the user has saved the last document.
    So, if a user has saved the Sales Order with a big column width for the 'Item Description' then after saving and re-entering into the Sales Order, the user can see the same column width for all the Sales Order's.
    I hope the above helps.
    Cheers~
    Jitin Chawla

  • How to extract the column width in ALv report if its executed in background

    I am executing an ALV report in background , in front end i am getting data properly, in back end for some columns some of the digits are missing.For example if PO no is of 10 digits it will display only 8 becos column size is like that , how to extract coulmns in back ground.
    I have executed in background and checked the spool and  for some of the columns width is not sufficient to display comeplete data so please suggest how to extract the columns sizes if executed inj background for an ALV

    Hi Deepthi,
    you can try with the above mentioned suggestions ,if its worked its fine ,
    If not use Docking container instead of custom container, For ALV in back ground jobs, its suggest to use docking container instead of custom container , below you can find the declaration for docking container and code to use docking and custom container in your program for fore and back ground.
    or you can use docking container alone for both operations.
    Data : G_DOCK1 TYPE REF TO CL_GUI_DOCKING_CONTAINER,
    IF CCON IS INITIAL. (ccon is container name )
    *Check whether the program is run in batch or foreground
        IF CL_GUI_ALV_GRID=>OFFLINE( ) IS INITIAL.
    *Run in foreground
          CREATE OBJECT CCON
            EXPORTING
              CONTAINER_NAME = 'CON1'.
        CREATE OBJECT GRID1
            EXPORTING
              I_PARENT = parent_1.
    ELSE.
    *Run in background
          CREATE OBJECT GRID1
            EXPORTING
              I_PARENT = G_DOCK1.
        ENDIF.
      ENDIF.
    B&R,
    Saravana.S

  • Is it possible to resize page column widths at runtime (by the user)?

    hi all,
    i have cretaed a page using the 2-columns narrow/wide layout.  this layout is perfect for what i want to do.
    however, the users have complained that they would like to be able to resize the columns, just like they are able to do with the Detailed Navigation column (using the small "<" and ">" arrows).
    is it posssible to add this functionality to my custom pages so that can also resize the columns?
    i searched for options in the properties, but didn't find anything.
    thanks,
    mm

    This was a great place for me to start
    Thank you
    I took profdant139's suggestions a bit further as my real goal was to have the "Document column" narrower. The goal to be able to see all the other document info that was usually hidden way out to the right
    To achieve my results I right clicked in the upper bar with the column names and chose from the drop down box "comments" column (as suggested). I then dragged it to the far right. This pushed all the other columns over.
    In the end of the day I ended up adding "Size" and "Date modified" columns as well to get my desired results.
    Remember one can move different columns around to be in the order you need by clicking on the column to get it active and then left click and drag it to where you want
    Another great thing is that by default (Using Mavericks) the date modified, opened,created columns have date and time. One can shrink them down to xx/xx/xx format by manually adjusting the column width like one does in Excel - click on column separator up top and drag
    Once all that is done, at least on my box, I closed it out and opened up a new finder window and everything was as I wanted.
    Thank you for the help  from the above helper to get me here

  • Reports 6i default column widths

    Reports 6i does not appear to pull the correct column width for varchar2 columns when building reports through the wizard. It sets them to 10 regardless of the length.
    Is there a way to either always define a specific database column to a specific width in reports or to get reports to size the column correctly through the wizard?
    Thanks

    Thanks for the quick answer Jay! I tried the latter approach and it didn't work.
    Given my limited understanding of CSS I first researched what the # signifies and found that it precedes a value from an ID attribute of an element. Which makes sense because this override would need to know specifically what to adjust.
    Next I scanned the source and couldn't find an ID of portletColumnFormatter_0 the closest thing I found was a summary field (summary="Portlet column formatter table.").
    Edit: Hmmm...
    A quick scan of portal.bea.com shows that ID does in fact exist there but it appears that site is on version 6.5.0
    Was this ID value missing in an earlier install version perhaps?
    Edit: Aha!
    Yet a few moments later I realized my err...our dev environment is still on 6.1.0 which, if memory serves, was missing this key attribute!
    It appears my first priority should be to syncrhonize our two environments and THEN worry about customizations.
    Thanks again for the help, I'll refer back to this as soon as I'm upgraded:)
    Edited by geoffgarcia at 04/30/2008 10:04 AM

  • Interactive Report Column Width adjustable?

    I am using the interactive reports in 3.1.2 and love them. That said, I have a question/problem. I have a column in my report that is essentially comments. It often contains hundreds of bytes of text per row of data. When I use the interactive report I find no where that I can define a default column width or number of report rows to display. So, when I run the report, the column with the comments defaults to a column width of about 25 characters and this causes it to display many html rows for this report row and makes the report very ugly.
    Does anyone know if there is a way to redefine a column in an interactive report to prevent this?

    Scott,
    Using FOP.
    Standard reports PDF can resize columns.
    Interactive report does not. Additionally, the page size does not work the same as the regular reports. Moving between landscape and portrait changes the size of the height and width.
    I assume there are several problems.
    1. The report does not resize horizontally. I will have to create a second report to see if I can duplicate the issue.
    2. The Print page of the report region does not have the same fields as the regular reports. I am not sure why or how to overcome the lack of being able to resize columns, etc.
    3. The functionality on the page does not seem to all work. At least not the same way as the regular reports. Changing paper size and orientation are two examples I have verified.
    4. Can't select a template. How can a different XSL-FO template be used?
    I am going to try and push it to Word.
    Sam
    Edited by: slavanaway on Mar 26, 2009 1:13 PM

  • How to increase a column width in numbers

    Hello,
    Is there a way to increase the column width of a numbers table by using a short cut.
    In a few words is there any shortcut to increase or decrease the size of cells and columns?
    Something like command+?
    Regards,
    Jonathan M.

    No key commands are available.  You can select the table then use the "Table Formatter":
    These controls will apply to the items selected.  If you have one column highlighted then you can change the width of that one column.  If you select all columns then this control will apply to the selected columns.
    you can also hover the cursor over the dividers between columns (the lines in the header... the lines between, for instance, the "A" and  the "B").  The cursor will change to a vertical bar with a horizontal line with left right arrows, then click and drag as needed.  Similar for rows.

Maybe you are looking for