Columns are off

ff 3.6.10 I had an older version of IE Tab Plus. I was having a problem with a page coming up and clicked on the change engine under the IE tab (I incorrectly assumed it would bring up the page in more of an Internet Explorer view). Now pages that have columns now show left and right margins that are disproportionally wide with the content in the middle squished. I disabled the add on, installed the latest add-on, installed ff via safe mode and then completely uninstalled and reinstalled ff. Not sure what else to try but it is not the websites as I can view them on other machines and they look perfect.

See http://kb.mozillazine.org/Websites_look_wrong
Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
See [[Text Zoom]] and [[Page Zoom]] and http://kb.mozillazine.org/Zoom_text_of_web_pages

Similar Messages

  • ICal times in left column are off five hours from calendar

    I've just noticed that the times on the left side off my calendar are off. It says 7:00 but it's actually midnight (which is correct) and it proceeds ahead like that. For instance, where it says 2:00 it is actuallu 7:00 AM. I can tell this as when i schedule an event in the "block" it gives me the correct time. Also sometimes the week highlighted on the month view on the bottom left, highlights the right week but a month earlier. It's like it has a mind of it's own. Any suggestions?

    .

  • Cannot auto size columns in iTunes 10.4.  Columns are all mixed up with headings I have never seen. Cannot change by right clicking on columns.

    Cannot auto size columns in iTunes 10.4.  Columns are all mixed up with headings I have never seen. Cannot change by right clicking on columns. Cannot order albums alphabetically by double clicking on heading.

    Very many thanks to you, Putaro!  Your answer provided the solution. It was a buggy plug-in that turned out to be the culprit.
    You're off the hook, Apple, and my apologies for stating that you let a dog run loose. You skated by this time, Apple. But I'm watching you.
    But again, Putaro's reference to the plugins I had installed over the years turned out to illuminate the problem. I have several plugins in my iTunes plugins folder, pretty much all designed to add more visualizer functionality. I removed all of them, and ALL of the problems I noted in my post went away, with full iTunes functionality restored.
    I began adding the plugins back to hopefully single out the culprit. Among the ones I had been using included fielder, G-Force, Timestrech, volcanokit, QuartzComposer, and Jax. I hadn't used any of them in a while - probably at least a verison or more back in iTunes updates, but iTunes continued to work with all of them installed. Currently, only QuartzComposer continues to work in iTunes 10.4. The rest no longer even show up as visualizer opitons, with one exception. Jax does show up, but does not work. AND THE PRESENCE OF JAX IS WHAT KILLED MY ITUNES.
    I looked into it and went back to the developer, and it appears that they discontinued developing Jax some time ago - evidently, it was buggy and crash prone. I remember after buying it, having problems with it - having never worked to its touted potential, but I didn't pursue it, and never uninstalled it. Leaving it in there caused all iTunes functionality to cease with the iTunes 10.4 update.
    If you've got Jax installed, consider removing it before updating to iTunes 10.4.
    My iTunes is now working right as rain, thanks again to Putaro!
    -Jon

  • FDM 9312 Variance Analysis report and columns 1 off in xls

    Hi,
    I have a variance analysis report in FDM and when i run in HTML and PDF, all the columns are aligned/formatted fine. But when i run it in xls, the columns are one off. Has anyone seen this before or experienced this.
    Thanks,
    Azmat Bhatti

    This is due to formatting within Excel. You can try to adjust the report via the report designer in the workbench. It may not be possible to run the report in Excel with the formatting you are expecting.

  • Calculated column  - non-rolling rowsum where columns are not null

    I have a calculated "Year total" column that sums 12 month columns. In our business $0.00 is not the same as null, so i have some columns without numeric data. My calculated column is only working when there is numeric data in all 12 months and i need it to work for rows where some columns are null.
    Is there an easy way around this?

    Figured out how to do this using the IFNULL function.

  • Formula Columns are not working in Reports 10g

    Hi,
    We converted the reports developed in Reports 6i to Reports 10g. When we run the report in Reports 10g Builder everything works fine. But when we deploy the same report in Oracle Application Server and invoking the report the formula columns are not working ie., the fields/ placeholder columns which are based on the formula column are not displaying any values in the report.
    Please, someone help us in this regard.
    Thanks & Rgds,
    M T

    What version of Reports do you use..???
    Greetings...

  • How can I write into a table cell (row, column are given) in a databae?

    How can I write into a table cell (row, column are given) in a database using LabVIEW Database Toolkit? I am using Ms Access. Suppose I have three columns in a table, I write 1st row of 1st column, then 1st row of 3rd column. The problem I am having is after writing the 1st row 1st column, the reference goes to second row and if I write into 3rd column, it goes to 2nd row 3rd column. Any suggestion? 
    Solved!
    Go to Solution.

    When you do a SQL INSERT command, you create a new row. If you want to change an existing row, you have to use the UPDATE command (i.e. UPDATE tablename SET column = value WHERE some_column=some_value). The some_column could be the unique ID of each row, a date/time, etc.
    I have no idea what function to use in the toolkit to execute a SQL command since I don't use the toolkit. I also don't understand why you just don't do a single INSERT. It would be much faster.

  • My library of 800  songs has been replaced by 48 older items which I believe are off an older device (old nano belonging to another family member). How do I get my songs back?

    My library of 800  songs has been replaced by 48 older items which I believe are off an older device (old nano belonging to another family member). How do I get my songs back?

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • Hi I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

    I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

    What device?
    What format?
    How are you importing it?
    Can you find the external audio with Finder?
    Where is your destination file when you import it?
    Andy

  • None of the fact sources for [column] are compatible with the detail filter

    Hi Experts,
    I am using obiee 11.1.1.7.
    Getting below error when i add a filter of non conformed dimension column.
    Below is the error
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P 
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14023] None of the fact sources for [column] are compatible with the detail filter
    Please help in solving an issue.
    Regards,
    NN

    Hi NN
    You need to follow steps in below link to model your BMM layer for the report to work with non confirmed dimensions.
    http://obibb.wordpress.com/2010/05/31/multiple-fact-reporting-on-non-conforming-dimensions/
    Once you have followed these steps you can use the non confirmed dimension in the reports.When you see the logs to see the query generated by obiee,it generated 2 queries 1 with confirmed dimension and other with non conformed dimension.When you filter using non confirmed dimension you will now not notice any error but the results will not be filtering out because the filter will be applied only in 1 query which is valid
    Now for this to work what you can do is ,instead of using the filter drag the column you like to filter as a prompt in your view.default it to the value you need using the case statement and hide it.This is one of the work around.
    There may be many other work arounds for this but you need to understand that for you requirment to work you need to tweek OBIEE to generate 1 query instead of 2  queries.

  • Columns are not displaying in a Dimension in the presentation layer

    Hi All,
    I have a Dimension in one of the subject area which has 3 columns. It was working fine but yesterday, we have an issue about this. These columns are not displaying anymore in the dimension.
    I have checked in the Repository and from the Presentation services for the permissions and they look fine. Is there anything else am missing. If so, where I need to check.
    Kindly help me on this.
    Thanks,
    Imtiaz.

    Hi,
    Check three things.
    1. Try to login Admin user and check whether those columns are present or not.
    2. Try to login different browser.
    3. Cross check privileges for login user (what role has assigned ).
    Note: Clear the browser cache and all Bi server cache and check.
    Hope this help's
    Thanks,
    Satya Ranki redddy

  • Colors are off

    I've used previous Photoshop versions and recently upgraded to Photoshop CS5 (I've used the same Dell monitor with previous versions and it looked just fine before). For some reason the colors I use in Photoshop CS5's work-space are off.
    For example, the menu and interface is the perfect grey color, yet when I select a grey on my workspace, it shows as a tan color (see attached image). The only way to make it show the true colors (its not just the greys, all colors are off), is if I select in View>Proof Setup>Monitor RBG, then select View>Proof Colors. Even in CMYK, the colors are off.
    My Color Settings Working Spaces are set to:
    RGB: sRGB IEC61966-2.1 (I've tried changing this to "Monitor RGB" and "Adobe RGB (1998)" and it doesn't help my issue)
    CMYK: U.S. Web Coated (SWOP) v2
    Gray: Dot Gain 20%
    Spot: Dot Gain 20%
    Even though it looks off, when I Save for Web, the greys and the rest of the colors are saved normally. So it's just in my workspace, which makes it hard to figure out what true color I'm using as I'm designing.
    I don't understand why this is happening and how to fix it. I shouldn't have to turn on Proof Colors - Monitor RGB every single time I open Photoshop. And of course, I can't even view it with Monitor RGB Proof Colors on when I'm working in CMYK. Any suggestions?

    I haven't had specifically the problem you are seeing, but it's possible the factory monitor profile is just wrong or corrupted.
    Removing that Dell profile from within the Devices tab is required to get your system to use the system default sRGB profile, and if the sRGB profile doesn't give you accurate color (I believe the 2208 is a wide gamut monitor, so it probably won't) you may need to use a calibration device if you want really accurate color.
    Some rules of thumb to consider:
    If you want your non-color-managed output of sRGB files (e.g., most stuff shown by Internet Explorer) to exactly match what you see in Photoshop, just use the Windows default sRGB profile for the monitor profile (i.e., remove the 2208 profile).
    If you want colorimetrically accurate color from your color-managed applications (e.g., Photoshop), then you'll want to remove the profile and specifically calibrate your monitor using a device made for the task.  In this case, Photoshop and other color-managed apps will use the document and monitor profiles and accurately display your images, but non-color-managed apps will not, and will thus look different (in your case, much more saturated).
    You might want to make a copy of that file (C:\Windows\System32\spool\drivers\color\SP2208WFP_DVI.ICM) in a safe place before making any changes; I'm not sure whether removing it from the dialog might actually delete it.
    -Noel

  • Columns are not being recognized when I print a scanned item

    I am scanning to an editable document.  The document I am scanning has columns but when I print the columns are gone and everything is put in a list.  How do I correct this?
    This question was solved.
    View Solution.

    Hi pattyc2738. Scanning items to 'editable text' (also called OCR) can be difficult. Depending on what software you are using, most programs to get the image from the scanning glass only recognize the words, and not the formatting. Columns would be a special formatting feature that most entry level OCR software will not work well with.
    The “Scanning Text” section half way down this document may answer some basic questions you have:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=bps02997&cc=us&dlc=en&lc=en&jumpid=reg_r1002_use​...
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Q_1 - Q_2 DataLink. Q_2 columns are not apperaing in Generate to file - XML

    Dear experts i have developed a report in 6i against Oracle Applications 11i, Purchasing Module ...... I have two Queries in DataModel Q_1<->Q_2 with DataLink. The only problem is Q_2 columns are not appearing in Generate to file -> XML.
    I developed similar style report against scott/tiger tables and Q_2 columns are appearing in XML. their are no wrong settings like "Exclude from XML output"
    Generate to file -> delimited, html, pdf etc are working OK for both APPS and Scott RDFs.
    Does this have something to do with what is mentioned here (though for 10g, point 17.1.4) ...
    http://web.deu.edu.tr/oracle/B14099_16/aix.1012/relnotes.1012/relnotes/reports.htm
    QUOTE
    17.1.4 Limitation on Linked Queries for DelimitedData Output
    DelimitedData output does not allow multiple queries to be linked to the main query, because sibling groups are not supported.
    For example:
    Case 1: You have a link between Q1 and Q2, a link between Q2 and Q3, and a standalone Q4
    query.
    Q1<-->Q2<-->Q3 Q4
    In this case, DelimitedData output is generated correctly.
    Case 2: You have a link between Q1 and Q2, a link between Q2 and Q3, and a link between Q4 and Q1.
    Q1<-->Q2<-->Q3 Q1<-->Q4
    In this case, DelimitedData output is not generated correctly. Alternatively, you can use XML output.
    Thank you
    Edited by: user473160 on Jun 3, 2009 12:05 PM

    Hi,
    no, the mentioned delimited text restrictions do not apply to XML-output...
    Hm, try to take your report and use the wizard to generate a paper layout to see if the data is really "appearing" due to your data model.
    Maybe there is some problem in the data link... e.g. number to character conversion in the datatypes that causes the problem...
    Cheers,
    Jens Rettig

  • Elements in my IDML file are off centre

    Hello, I have a designer who sent me back an IDML file (he's on CS6, i'm on CS5). On my end about 1/3 of the pages in a 100 page document are off centre by the exact same amount.
    What's bizarre is that some of the off-centre elements are based off of a Master Page, and the Master Page is perfectly fine. Some pages that use master page elements are fine, while other pages are off centre.
    Any idea why this is happening?
    Right now i'm going through the pages one-by-one and re-arranging the page elements...

    The fact is that IDML is not a tool for collaborative workflows and this
    is just the kind of thing that can happen and why everyone should be on
    the same version.
    Bob

Maybe you are looking for