COM_PARTNER_BADI is not trigger during CHANGE

I can determine the Manager partner function by using BADI COM_PARTNER_BADI method DETERMINATION_ADD_IN_1. However, if the user changes the partner function, Manager need to be redetermined. The problem is, This BADI is not getting triggered during Change. Please let me know if i am missing something...Thanks.

Please check the below documentation:
Partner Redetermination Using this function, you can manually trigger the partner determination procedure from within a business transaction, such as lead or opportunity, and redetermine all parties, such as contacts, employees, and other partners, involved in the transaction. This enables you to ensure that the correct parties are identified and associated with a transaction This might be necessary because partners determined originally, based on a partner determination procedure, are no longer up-to-date. You might have switched to new partners, for example, which in turn might require changes to all dependent partner functions. Prerequisites u2022 You have set up the partner determination procedure appropriately. You do this in Customizing for Customer Relationship Management, by choosing Basic Functions Partner Processing Define Partner Determination Procedure . u2022
You have activated the enhancement implementation ES_CRM_SET_ACTIVE of the enhancement spot ES_CRM_PARTNER_REDETERMIN.
You have to set the parameter value X for the user parameter CRM_REDETERMINATION
Note Partner redetermination is only possible for those business objects listed in the table COMS_PARTNER_DET. Features You can start partner redetermination manually from the overview page of a lead or opportunity.
Depending on your Customizing settings, partners are redetermined as follows:
No Redetermination The partner functions in the partner determination procedure that have this value are not changed. All existing partners remain, with no new partners of the given partner function being determined or added to the partner set. Similarly, any existing partners are not replaced.
Add New Partners The partner functions in the partner determination procedure that have this value are redetermined. All existing partners remain and any new partners determined based on the partner function are added to the partner set. Before a new partner is added to the set, the system checks whether the same partner with the same partner function already exists. If this is the case, the newly determined partner is not added to prevent a duplicate entry. The system indicates when the maximum number of partners has been reached.
Replace Existing Partners The partner functions in the partner determination procedure that have this value are redetermined. All existing partners of the given partner function, irrespective of whether they were entered manually or determined automatically, are discarded and the newly determined partners with the given partner function are added to the partner set. The system indicates when the maximum number of partners has been reached.
Note A partner might be replaced by the same partner. However, if the partner previously had any notes, these will be lost. u2022 Buying Center All partners in the buying center are partner functions of the partner function category Contact Person. If redetermination is allowed for partner functions of this category, this affects the buying center as follows: o Where new partners are added, newly determined partners are shown but without any characteristics, relationships to other partners, or relationship characteristics. o Where existing partners are replaced, the buying center partners of a given partner function are replaced completely, resulting in not only the partner being deleted, but also the associated characteristics, relationships to other partners, and relationship characteristics. Note
If partner determination has been blocked in Customizing for the partner determination procedure, redetermination does not take place for this partner function, irrespective of the settings made for partner redetermination. u2022 Partner functions that are not part of the partner determination procedure are unaffected by redetermination. u2022 If redetermination is performed, territory determination also takes place. However, there is no organizational data determination, or price and free goods determination.

Similar Messages

  • I have a workflow transaction which got timeout and escalated to the next level. The comments in the approver's notes are just changed by the system in doing so.  For eg: "Moving John under Michael" gets changed into "Moving+John+under+Michael" during the

    I have a workflow transaction which got timeout and escalated to the next level. The comments in the approver's notes are just changed by the system in doing so.
    For eg: "Moving John under Michael" gets changed into "Moving+John+under+Michael" during the timeout/reminder notification. Any idea ?
    -Thanks,
    Arun

    I have recently started having this problem in PSE8. The Adobe workaround
    did work, but I don't fancy having to re register each time I use it.
    What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
    It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
    If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
    Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
    Hope this helps

  • For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

    For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
    We are getting below error.
    The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
    COuld anyone please help us to know, How it can be resolved?
    We also have this below error.
    System Response
    If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
    If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
    Procedure
    The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
    Procedure for System Administration
    Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
    Additional Information:
    System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
    No authorization to log on as a trusted system (Tr usted RC=0).
    /TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
    For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

    If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
    Hope this helps.
    Thanks!
    Jhero

  • Changed delivery does not trigger TPSDLS01 IDoc to external TPS

    We have a R/3 Release 4.6C server, which is configured to send delivery IDoc (TPSDLS01) to external transportatoin planning system (TPS) via ALE/RFC.
    When a new delivery is created, we can invoke VT61 to transmit TPSDLS01 to notify TPS.  When a delivery is deleted or deallocated, R/3 immediately transmits the TPSDLS01 IDoc to notify TPS.  These all work just fine, but we have a problem:
    When a delivery that has already been transmitted to TPS but got modified after the first transmission, we need to be able to transmit it again to notify TPS of such change.  However, R/3 refuses to transmit it again.  When invoking VT61, nothing get transmitted and the log would say the delivery <delivery id> already transmitted to planning system <TPS ID>.
    I am new to this, but it seems to be a simple configuration issue.  I am suspecting the problem may come from the output parameters of our partner profiles.  On the "Message Control" page for outbound message type TPSDLS, we have nothing defined.
    On page 8 of the R/3 Transportation Planning Interface Document (https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9519a090-0201-0010-189d-a9d947b30a8e), there is a paragraph:
    Deliveries that are changed in R/3 (transaction VL02) after they have already been reported to the transportation planning system are automatically retransferred after the changes are posted (provided they are relevant to transportation). This functionality is activated by the link to message control. When a change is made, the whole document is retransferred (not only the changed data is transferred).
    Could anyone explain what this "activated by the link to message control" means (in terms of steps and exact field values)?  Or if you think the problem is from elsewhere, please let me know.
    Many thanks.

    Hi,
    I know this is quite old now....but, did you ever find an answer to this problem?
    SR

  • Time Stamp not affected by change of calculated fields.

    Dear Experts,
    We have several calculated fields that are depended on values of lookup records or the system-time.
    I experienced during recalculation that when the calculated field changes the Time Stamp did NOT change. This change did also NOT trigger the workflow with Trigger Action: Record Update. AND the record is not Syndicated because the syndication map has Suppress Unchanged Records.
    Has anyone an idea how to solve this?
    Kind regards,
    Job Jansen

    Dear Kanstantsin,
    I don't know what you mean by "simple field" but I have 2 calculated fields one is Text and the other is Boolean. In both cases the Time Stamp is not updated during recalculation.
    Of course both fields are selected fields in the Time Stamp field.
    Kind Regards,
    Job Jansen

  • Why iTunes does not synchronize any changes made ​​to photos in iPhoto library 11?

    I cut out some photos of my library, but on the iPad, although Ihave synchronized after the changes, it always displays the oldversions of my images (those not changed).

    Simon:
    As Tubby pointed out, your dbms_output commands do not display the value you selected in the trigger. Your trigger based demonstration needs to be more like:
    SQL> SELECT * FROM t;
            ID DT
             1 05-SEP-2009
             2 17-JUL-2009
    SQL> CREATE TRIGGER t_ai
      2     AFTER INSERT OR UPDATE ON t
      3     FOR EACH ROW
      4  DECLARE
      5     PRAGMA AUTONOMOUS_TRANSACTION;
      6     l_dt t.dt%TYPE;
      7  BEGIN
      8     SELECT dt INTO l_dt
      9     FROM t
    10     WHERE id = :new.id;
    11     DBMS_OUTPUT.Put_Line ('ID: '||:new.id);
    12     DBMS_OUTPUT.Put_Line ('Old dt: '||:old.dt);
    13     DBMS_OUTPUT.Put_Line ('New dt: '||:new.dt);
    14     DBMS_OUTPUT.Put_Line ('Aut dt: '||l_dt);
    15  END;
    16  /
    Trigger created.
    SQL> UPDATE t SET dt = sysdate WHERE id = 2;
    ID: 2
    Old dt: 17-JUL-2009
    New dt: 25-OCT-2009
    Aut dt: 17-JUL-2009
    1 row updated.So, the automomous transaction select did not see the changed value of dt.
    I know you are just trying to understand automomous transactions here and would never do sometihg like this in production right? :-)
    Your trigger, as written, has some interesting side effects because of the automomous transaction. For example:
    SQL> INSERT INTO t VALUES(3, sysdate - 25);
    INSERT INTO t VALUES(3, sysdate - 25)
    ERROR at line 1:
    ORA-01403: no data found
    ORA-06512: at "OPS$ORACLE.T_AI", line 5
    ORA-04088: error during execution of trigger 'OPS$ORACLE.T_AI'
    SQL> UPDATE t SET id = 3 where trunc(dt) = TO_DATE('05-Sep-2009', 'dd-mon-yyyy');
    UPDATE t SET id = 3 where trunc(dt) = TO_DATE('05-Sep-2009', 'dd-mon-yyyy')
    ERROR at line 1:
    ORA-01403: no data found
    ORA-06512: at "OPS$ORACLE.T_AI", line 5
    ORA-04088: error during execution of trigger 'OPS$ORACLE.T_AI'John

  • "An autonomous transaction does not see any changes made by main transact"

    Hi,
    I'm trying to reproduce the "An autonomous transaction does not see any changes made by main transaction" reffered on :
    Oracle® Database Application Developer's Guide - Fundamentals
    10g Release 2 (10.2)
    Part Number B14251-01
    chapter 2 SQL Processing for Application Developers
    Paragraph : Autonomous TransactionsI set up a simple case...
    create table emp_ as select * from emp
    begin
      update emp_ set hiredate=hiredate+100 where empno=7934;
    end;
    create or replace trigger trg_emp_
    after insert or update on emp_
    for each row
    declare
        pragma autonomous_transaction;
        emp_var emp.hiredate%type;
      begin
        select hiredate
          into emp_var
          from emp_
        where empno=:new.empno;
        dbms_output.put_line('empno: '||:new.empno);
        dbms_output.put_line('old hiredate: '||:old.hiredate);
        dbms_output.put_line('new hiredate: '||:new.hiredate);
      end;Prior to any change...
    SQL> select empno,hiredate from emp_;
    EMPNO HIREDATE
    5498 21/4/1982
    5499 11/10/1981
    5411 10/10/1981
    5410 10/10/1982
    7369 17/12/1980
    7499 20/2/1981
    7521 22/2/1981
    7566 2/4/1981
    7654 28/9/1981
    7698 1/5/1981
    7782 9/6/1981
    7788 19/4/1987
    7839 17/11/1981
    7844 8/9/1981
    7876 23/5/1987
    7900 3/12/1981
    7902 3/12/1981
    7934 23/1/1982After the change...
    SQL> begin
      2    update emp_ set hiredate=hiredate+100 where empno=7934;
      3  end;
      4  /
    empno: 7934
    old hiredate: 23/01/82
    new hiredate: 03/05/82
    PL/SQL procedure successfully completedAccording to the Oracle doc the select of the autonomous transaction should not see the change made to the hiredate column of the table in the main transaction(in the anonymous block)....
    What may i do wrong..????
    Thank you,
    Sim

    Simon:
    As Tubby pointed out, your dbms_output commands do not display the value you selected in the trigger. Your trigger based demonstration needs to be more like:
    SQL> SELECT * FROM t;
            ID DT
             1 05-SEP-2009
             2 17-JUL-2009
    SQL> CREATE TRIGGER t_ai
      2     AFTER INSERT OR UPDATE ON t
      3     FOR EACH ROW
      4  DECLARE
      5     PRAGMA AUTONOMOUS_TRANSACTION;
      6     l_dt t.dt%TYPE;
      7  BEGIN
      8     SELECT dt INTO l_dt
      9     FROM t
    10     WHERE id = :new.id;
    11     DBMS_OUTPUT.Put_Line ('ID: '||:new.id);
    12     DBMS_OUTPUT.Put_Line ('Old dt: '||:old.dt);
    13     DBMS_OUTPUT.Put_Line ('New dt: '||:new.dt);
    14     DBMS_OUTPUT.Put_Line ('Aut dt: '||l_dt);
    15  END;
    16  /
    Trigger created.
    SQL> UPDATE t SET dt = sysdate WHERE id = 2;
    ID: 2
    Old dt: 17-JUL-2009
    New dt: 25-OCT-2009
    Aut dt: 17-JUL-2009
    1 row updated.So, the automomous transaction select did not see the changed value of dt.
    I know you are just trying to understand automomous transactions here and would never do sometihg like this in production right? :-)
    Your trigger, as written, has some interesting side effects because of the automomous transaction. For example:
    SQL> INSERT INTO t VALUES(3, sysdate - 25);
    INSERT INTO t VALUES(3, sysdate - 25)
    ERROR at line 1:
    ORA-01403: no data found
    ORA-06512: at "OPS$ORACLE.T_AI", line 5
    ORA-04088: error during execution of trigger 'OPS$ORACLE.T_AI'
    SQL> UPDATE t SET id = 3 where trunc(dt) = TO_DATE('05-Sep-2009', 'dd-mon-yyyy');
    UPDATE t SET id = 3 where trunc(dt) = TO_DATE('05-Sep-2009', 'dd-mon-yyyy')
    ERROR at line 1:
    ORA-01403: no data found
    ORA-06512: at "OPS$ORACLE.T_AI", line 5
    ORA-04088: error during execution of trigger 'OPS$ORACLE.T_AI'John

  • Not allowing to change the plants in me51n transaction

    hi all,
    my requirement is to not allow the user to use different plants at item level(10,20 etc) . for that i have used the user exit MEREQ001 in the function module EXIT_SAPLMEREQ_010
    i have written following code
    DATA : WA_EBAN LIKE EBAN,
           WA_EBAN1 LIKE EBAN.
    IF SY-TCODE EQ 'ME51N'.
      READ TABLE IM_T_EBAN INTO WA_EBAN INDEX 1 TRANSPORTING WERKS .
      IF SY-SUBRC EQ 0.
        LOOP AT IM_T_EBAN INTO WA_EBAN1 WHERE WERKS NE WA_EBAN-WERKS.
          IF SY-SUBRC EQ 0.
             MESSAGE ID 'ZM' TYPE 'E' NUMBER '305'.
          ENDIF.
          ENDLOOP.
    ENDIF.
    ENDIF.
    iam able to trigger tha error message when we use diffferent plants at item level.but after that iam not able to change the plants in iten level.so please can anyone suggest me how to solve this problem
    thanks in advance
    rama.

    This OSS [Note 383725 - Enhancement MEREQ001 various problems|https://service.sap.com/sap/support/notes/383725] may help you.
    Regards

  • BBP_PO_SEND_XML - Not triggered during the creation of PO

    Hi All,
    We are using SRM 7.0, configuration for sending PO in the form of XML is done as suggested with the method BBP_PO_SEND_XML. The problem is, this BADI is not triggered when we save (even after order) the PO with XML option and the status is displayed as Incorrectly processed. But, when I select the Incorrectly processed output type and click on Repeat Output, the BADI is called and is processed succesfully.
    Any reasons, why the BADI is not triggered during the creation or change of PO and is getting triggered only when we select the option Repeat Output? Please help me in correcting this issue.
    Thanks,
    Phani.

    Logic inside META_PO_SEND was written in user name check. Whereas the method BBP_PO_SEND_XML is triggered with batch user. Due to this reason, custom logic is not triggered.

  • My dvd player will not let me change regions, it just quits when i do, now its stuck on region 1. Any thoughts how i can solve this problem or get round it in some way?

    My dvd player will not let me change regions, it says i have one more chance to change it, then it just quits when i do, now its stuck on region 1. Any thoughts how i can solve this problem or get round it in some way?

    Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
    So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
    Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
    Memory can be tested with memory diagnostics programs like Memtest+
    Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
    If the motherboard has no response then do the basics first:
    Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

  • Workflow not triggering when changing Item-level Permissions in Sharepoint 2013 list

    Scenario:
    We have a custom list in Sharepoint 2013 that we use for Case Management. We have a workflow that triggers on a created item generated from an email. The user then gets a reply with a link to his own case.
    I want the users only to be able to see their own cases and no one elses.  When I change this under
    Advanced Settings under List Settings and
    Item-level Permissions and set them to Read items that were created by the user
    and Create items and edit items that were created by the user
    the workflow doesn´t trigger.
    How can I resolve this? I've tried every possible out-of-the-box permissions but with no result. Help!
    Thanks in advance!
    // Browncreek

    When you're testing , remember you cant trigger declarative workflow from the System Account - you need a general user account for auto-trigger workflows.  Good luck!
    Chris McNulty MCSE/MCTS/MSA/MVTSP | blog http://www.chrismcnulty.net/blog | twitter @cmcnulty2000 Microsoft Community Contributor Award 2011
    Hi, I have the same problem. Except that I am not using an email to create a new item. The item is created by members of a SharePoint group that have Contribute access to the list. When use the same settings i.e.
    Read items that were created by the user and Create items and edit items that were created by the user,
    the workflow does not trigger. If I set it back to Real all items and Create
    and Edit all items, it triggers the workflow.
    Please help me resolve as I have rolled this out to pilot users and am having this trouble.
    Thanks,
    Vishal

  • Finder/Window-Content not responding to changes and doesn't refresh

    Hi,
    i have a very strange Problem with the Finder since i upgraded to 10.6.4. The Finder doesn't react to changes from certain Applications.
    I noticed the effect in the Folder 'Downloads', f.e. if i try to download a file. Usually two files appear, the intended file with 0 kB and another temporary file. After the download is complete the temporary file will be deleted and only one file remains.
    Usually the whole process is visible and shown in the finder window. After the update it isn't which means that if i download a file, the Window content does not reflect the changes and the new files are not shown, even after the download is complete. To see the new files i have to trigger a change, either by creating a new folder or by changing the location (moving up a level).
    Interesting enough this only happens with certain Applications like Firefox or 'the Unarchiever' (a compression tool). If i download a file with Safari the temporary files and the downloaded files are shown in the window content without manually triggering a change. If i use 'keka' (another compression tool) the changes are also immediatly shown.
    In order to narrow down possible errors i have taken different approaches:
    a) i intently scanned and watched the console and read all error reports. There are no errors shown (with firefox or the unarchiever).
    b) I created a new user profile and the effects are the same.
    c) i ran 'disk utilities' and scanned the Access priviliges. Apart from the common problem within /system/java/... there are no problems
    d) i ran 'onxy' to clean the user and system cache. I rebuild the LaunchService Database.
    I didn't fix my Problem.
    That leads me to conclude that the problem is located in some system-function which is correctly triggered by some applications and apparently not by others.
    My Questions:
    1. Does anyone else has this problem and possibly a fix?
    2. Does anyone know how the finder is triggered by applications in order to refresh a window?
    tia,
    jc

    Hi Jeanclaude,
    You've described the problem well and took some excellent troubleshooting steps
    b) When you created the new profile, were you still engaging your third party apps, or are they installed in log-in items?
    1. It would be interesting to try a Safe Mode startup (It will take more time to startup in Safe Mode because it runs a directory check.)
    2 If step 1 doesn't turn up anything, re-install from your 10.6.x install disk (10.6 has the ability to "install in place" without touching anything other than system specific files.) Just pop in the disk, double-click and follow the prompts. Remember to uncheck language localizations if you don't use them & Printers except the one/ones you use.
    Let us know your results after these 2 steps.
    -mj

  • Output not triggered during SAVE from Shipment

    Hi,
    We have a custom Idoc triggering from the Shipment. The output shows up in the output screen (as yellow) and it is set to trigger 'immediate - 4'. But when I save, it does not issue an output. No errors, nothing just does not trigger at all. If I go into the shipment again in change mode and then save it, then it triggers the output.
    The output is an custom idoc, transmission medium 6, attached program RSNASTED and the form routine is EDI_PROCESSING.
    I tried debugging the program (in update debug mode)...found that an internal variable XNAST-UPDAT is set to 'D' (a GERMAN comment in code says "no longer found or changed key"). The only key change I can think of is the shipment number initially with $0001 and then changes to the actual shipment #. But this should happen even for other outputs..for eg, BoL printout. It does trigger without a problem and for this this indicator is not set to 'D'.
    Any thoughts ?
    Regards,
    Anand

    Hi Anand,
    Have u resolved this issue... bcoz i m facing the same issue..
    Can u plz tell me how u resolved it..
    Regards,
    Siva Kumar S.

  • Notification classification extractor not trigger delta

    I am facing the same .we have created custom data source for Notification classification  using notification master data extractor(0NOTIFICATN_ATTR)  but delta is not trigger for any changes in the notification line items..

    Hi Madhu,
    In SAP standard, the DataSource 0NOTIFICATN_ATTR is not DELTA compatible.
    Please refer to online documentation below, only a complete upload is
    available:
    http://help.sap.com/saphelp_nw70/helpdata/en/08/b388017dbff7479cc07f0249
    0d60d8/frameset.htm
    Thanks,
    Vimal

  • How to generate pulse during changing boolean value?

    I need to generate short pulse during changing boolean value from 0 to 1. This pulse is needed to reset counter. 
    I was trying with Event Structure with Value Change but I think that I did something wrong.
    Maybe sambody can give me some tips to do it in other way?
    Thank you in advance.
    Regards
    Solved!
    Go to Solution.

    Rogal wrote:
    I need to generate short pulse during changing boolean value from 0 to 1. This pulse is needed to reset counter. 
    I was trying with Event Structure with Value Change but I think that I did something wrong.
    Maybe sambody can give me some tips to do it in other way?
    Thank you in advance.
    Regards
    We assumed you wanted a pulse when a front panel button (boolean) was clicked.
    I am still not sure just what it is you want.
    Do you want a single pulse when x is greater than 4?
    You don't need an event structure for that.
    Omar

Maybe you are looking for