Combination with ABAP

Hi ,
     I have learnt SAP ABAP module , planning to learn another module which is of good combination for ABAP .. can you plz, help me out ??
Thanks and Regards
Sireesha Reddy

you can never 'learn' everything - there are many aspects and facets to master related to ABAP & the Workbench.
And even if you master a few aspects to some extent - everything is always evolving and improving...
so for example, you could be an expert in sapscript, but then smartforms arrives, and then Adobe Forms....so its a continual process of adaapting and relearning or even consolidating what you have already learned.
Gaining experience of any of the SAP modules (functional aspects) is necessary for you to improve your programming skills and knowledge.
There are also some other abap/development related areas to explore for you learn that are more technical too, such as some Basis, PI/interfacing/IDOC, Webdynpro, Workflow etc You can argue these are full time skills in their own right - but having ABAP knowledge is a pre-requisite to many i.e. webdynpro and a distinct advantage.
Cheers

Similar Messages

  • Error GR410: characteristic cannot be combined with key figures

    Hi,
    My problem is in Report Painter.
    I need to add selection by trading partner (or by vendor) in report 6OBU-001. For this Iu2018ve modified reporting table RWCOOM, in order to make available characteristic RASSC in the library 6O2.
    Iu2019ve added Trading partner in General selection of my own report (copy of 6OBU-001), but RP gives an error message: u201CCharacteristic RASSC cannot be combined with key figures. Check the report definition: the key figures used must be compatible with characteristic RASSC. For examples of useful combinations of characteristics and key figures, see the SAP standard reports.u201D
    Any opinions are truly appreciated.
    Anton

    I read this note before, but I still don't know how to write a ABAP code.
    I need information from table COEP like sum of qunatity or costs. I have this information for  Cost Elements and Orders in CCSS but I don't have for Materials.

  • X-distr.chain status in combination with valid from date

    Hello I am using MM02 X-distr.chain status in combination with valid from date, to give materials a certain status in the sales order depending on the delivery date of the orderline.
    How can I enter multiple statuses with future validation dates?
    example following status with validation dates where entered in MM02 for a material
    - material should have status A valid from January
    - material should have status B valid form April
    - material should have status C valid from July
    - material should have status D valid from September
    When I enter a sales order with delivery date in January system replies with status C.
    When I enter a sales order with delivery date in April system replies with status C .
    When I enter a sales order with delivery date in July system replies with status C .
    When I enter a sales order with delivery date in September system replies with status D.
    So only the current  ( or previous status when current is not valid yet) is retained by the system.
    How could multiple statuses be used?
    Thanks in advance
    Joos

    Hello Jalo,
    Thanks for your reply,
    My customer sell season relevant materials so they want to control order entry and delivery creation based on predefined dates.
    Status A  = material is blocked for order entry and delivery creation
    Status B  = material is allowed for order entry, delivery creation is blocked
    Status C  = material is allowed for order entry and delivery creation.
    Status D  = material is blocked for order entry, delivery creation is allowed.
    I had hoped to use standard functionality with this status field, it meets most of my customers requirements but at this moment the only alternative is to create a new table where this data can defined and create some abap logic in the user exit to set the status base on the table information.
    Regards
    Joos

  • Preview installation with ABAP, JAVA and EP

    Hello all
    I repost this topic to mark with the "question star".
    I been inactive in the sneak preview area for a few month and I see here in SDN that a lot of new software is ready for download.
    I have also read some of the postings from this forum, but I'm not sure what I need to have an installation with both ABAP, JAVA en EP.
    Can anyone verify that I need:
    1 server for the WAS 6.20 for ABAP
    1 server for SAP Enterprise Portal 6.0 SP4 NetWeaver Stack 2 Developer Workplace Sneak Preview for JAVA and EP.
    And that I can join the 2 systems via rfc or connectors.
    Is it also possible to get a Sneak Preview to Web Dynpro (or is it included in the above) ?
    Best regards
    Thomas Madsen Nielsen

    The combined ABAP and JAVA stack Web AS doesn't support installation of EP on top.
    If you want the features of both ABAP and JAVA stack in combination with EP then you will need two WebAS instances, one of those MUST BE Java ONLY!
    I suppose you could manually club things together with SDM, but the installation program (SAPinst) in its current form is pretty specific in its checks for a JAVA only Web AS before letting you proceed with EP install.
    I have not done a thorough check of the details on why you cannot run EP with Athe ABAP stack, it hasn't been worth the effort of trying....
    Nick

  • Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? Difference between Enterprise and SE?

    We’re seeing the following issue: sql - Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? - Stack Overflow (posted by a colleague of mine) and are curious to know if this behaviour is due to a difference between standard and enterprise, or could we doing something else wrong in our DB config.?
    We have also reproduced the issue on the following stacks:
    Oracle SE One 11.2.0.3 (with Spatial enabled)
    Redhat Linux 2.6.32-358.6.2.el6.x86_64 #1 SMP Thu May 16 20:59:36 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
    11.2.0.3.0 Standard Edition and 11.2.0.4.0 Standard Edition (both with Spatial enabled)
    Microsoft Windows Server 2003R2 Standard x64 Edition
    However, the SQL works fine if we try it on Oracle 11.2.0.3.0 *Enterprise* Edition.
    Any help or advice would be much appreciated.
    Kindest Regards,
    Kevin

    In my experience sdo_filter ALWAYS uses the spatial index, so that's not the problem. Since you did not provide the explain plans, we can't say for sure but I think yhu is right: Standard Edition can't use the bitmap operations, and thus it'll take longer to combine the results of the two queries (because the optimizer will surely split this OR up in two parts, then combine them).
    BTW: when asking questions about queries here, it would be nice if you posted the queries here as well, so that we do not have to check another website in order to see what you are doing. Plus it will probably get you more answers, because not everyone can be bothered to click on that link. It would also have been nice if you had posted your own answer on the other post here as well, because my recommendation would have been to use union all - but since you already found that out for yourself my recommendation would have been a little late.

  • Satellite L650: Some combinations with the FN button do not work on W7x64

    Hello,
    System
    <h3>Satellite L650-1KU</h3>Part number
    <h3><span class="partNo">PSK1LE-01700MRU</h3>
    I have install Windows by myself - this laptop haven't any OS from factory.
    Installed Windows 7 x64, all drivers and utilites from Toshiba driver site for windows 7 x64 accessible for my laptop model.
    I have no any unknown devices in Windows Device manager, all drivers installed and all hardware components woks fine i.e. wifi or bluetooth or web camera.
    But I still can't use some of keyboard combinations with Fn button. Not all, just five combinations do not work: Fn+F2 power modes, Fn+F4 hibernate, Fn+1,2 zoom and Fn+F8 wirelles devices.
    From search I have found only mentions about Fn+1,2 zoom - this funtion provide some util named Toshiba Zoom but on download page no any Toshiba Zoom for my laptop model and W7.
    Looks like there must be installed some additional utils from vendor for handling this combinations but I cant find any additional info or soft on driver download page.
    May be there are some utils what shold be located in lists of drivers/soft for 32 bit windows and it will be fine for 64 bit one?
    All combinations which works fine like volume +- Fn+3 Fn+4 or mute Fn+ESC does not shows any popus at moment of pressing, just <span class="short_text"><span class="hps">perform <span class="hps">its <span class="hps">function <span class="hps">without any indication.
    Dear users and support, can you help me what I should install from additional utils to provide support for combinations Fn+F2 power modes, Fn+F4 hibernate Fn+1,2 zoom and Fn+F8 wirelles devices?
    Message was edited by: Gimli_r

    Have you installed the Toshiba Value Added Package?
    Have a look on the Toshiba support/downloads website. Ensure you install the Win7 64bit version of TVAP designed for the L650 series.
    Updating the BIOS may also help.

  • Some keys don't work in combination with Shift

    Okay  so I have the Pavilion Sleekbook  15-b011nr 
    Serial Number:   [Personal Information Removed]
    Product Number:   C6N92UA
    and today I noticed certain keys don't work in combination with the left Shift for example, Shift+S (both left and right), Shift+M, Shift+Z, Shift +X, Shift+C don't work, shift+F does work but gives me this FV. same with j it gives me JM instead. I installed an updated bios, ran a diagnostic test using F2 and under the compenant test for the keyboard it failed and gave me this
    keyboard test failed
    failure Id # U375BD-6m96P5-MFPX1F-G03B03 
    product id # C6N92Ua#aba
    now while trying to type all this I found other letters now working as well as me not being able to input the semicolon with either shift key. frustrating since I got this laptop in June so it's still under warranty. Has anyone else encountered this problem and if so how do i fix mine? I'm pretty tech savvy so feel free to let me know, or is my only option is a replacement from HP?
    Thanks!

    Hi hzapata, I know that it work fine, after Load preset, but why You lost the default configs?
    Is this my question to Smit.

  • Issue with language specific characters combined with AD-Logon to BO platform and client tools

    We are using SSO via Win AD to logon to BO-Launchpad. Generally this is working which means for Launch Pad no manual log on is needed. But  this is not working for users which have language specific letters in their AD name (e.g. öäüéèê...).
    What we have tried up to now:
    If the AD-User name is Test-BÖ the log on is working with the user name Test-BO with logon type AD
    If the logon Type "SAP" is used than it is possible to use the name Test-BÖ as the username
    Generally it is no problem in AD to use language specific letters (which means it is possible to e.g. log on to Windows with the user Test-BÖ)
    It is possible to read out the AD attributes from BO side and add them to the user. Which means in the user attributes the AD name Test-BÖ is shown via automatic import from AD. So it's not the problem that the character does not reach BO.
    I have opened a ticket concerning that. SAP 1th level support is telling me that this is not a BO problem. They say it is a problem of Tomcat. I don't believe that because the log on with authentification type SAP is working.
    I have set up the same combination (AD User Test-BÖ with SAP User Test-BÖ) as a single sign on authentification in SAP BW and there it is working without problems.
    Which leads me to the conlusion: It is not a problem of AD. It is something which is connected to the BO platform but only combined with logon type AD because SAP Logon is working with language specific characters.

    I have found this article with BO support:
    You cannot add a user name or an object name that only differs by a character with a diacritic mark
    Basically this means AD stores the country specific letters as a base letter internally. Which means that if you have created a user with a country specific letter in the name you can also logon with the Base letter to Windows.
    SAP-GUI and Windows are maybe replacing the country specific letters by the base letter. Due to that SSO is working. BO seems not to be able to do that. Up to now the supporter from BO is telling me that this is not a BO problem.
    Seems to be magic that the colleagues of SAP-GUI are able to to it.

  • Bug? Mailto: in combination with Office 2013 Spell Checking.

    Dear community,
    For one of our sollutions we use the mailto protocol to send a hyperlink which users can use to automatically open a predefined new-email-window.
    This works fine with Office Professional Plus 2010 [EN-US] (32bit) in combinatione with Microsoft Office Language Pack 2010 - Dutch/Nederlands (32bit).
    However, Office Professional Plus 2013 [EN-US] (32bit), in combination with Microsoft Office Language Pack 2013 - Dutch/Nederlands (32bit), crashes whenever the spellingcheck is started.
    The mailto-command we use to reproduce this problem is (enter command in Internet Explorer, open with Outlook):
    mailto:[email protected]?subject=%20Actie%20vereist&body=%5b2103162%2f335159076094968874376260057075247208793%5d
    During analyses we concluded:
    - Office Configuration Analyzer Tool 1.2 (Full Scan) did not find any related issues.
    - Spellchecker crashes while checking the text within the body.
    - Uninstalling Microsoft Office Language Pack 2013 - Dutch/Nederlands solves the problem, but obviosly, we want to keep the Dutch spelling check functionality.
    - Standard Englsh (U.S.) spellchecking functions without problems.
    - This problem is reproducable on any computer running Office Professional Plus 2013 [EN-US] in combination with the Dutch (Nederlands) spelling check. Tried multiple hardware configurations (Intel based) and multiple OS's (Windows 7 Enterprise
    (64bit), Windows 8.1 Enterprise (64bit), Windows 8.1 Pro (64bit). All with the same result.
    Is there way to solve this issue, without loosing Outlook 2013 as client and Dutch Spelling Check capabilities?
    Kind regards,
    Leon Kandelaars.

    Hi Steve,
    Thanks for your reaction.
    Q - Do you mean Outlook crashes when we click the Spelling & Grammar button under Review tab?
    A - Yeah, if you try to edit the mail and have 'check spelling as you type' activated, it wil crash as well.
    Q - If we copy the email body and paste it to a new email message, will this issue continue?
    Does this   issue happen with other Office 2013 programs? Please try to use 'spell check' in word and check if the same issue occurs.
    A - If you copy the generated body to a new email or Word 2013, the spelling check will in both cases crash the application.
    Q - In addition, we can also have a look at the event log to see if we can find anything useful.
    A - The crash generates an "Application" "Hang error". I've generated 2 (1 with Outlook, 1 with Word):
    Generated mail, spellcheck crashes Outlook:
    Log Name:      Application
    Source:        Application Hang
    Date:          10-3-2015 9:52:31
    Event ID:      1002
    Task Category: (101)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      xxxx.xxxx.xxx.nl
    Description:
    The program OUTLOOK.EXE version 15.0.4693.1000 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
    Process ID: 87c
    Start Time: 01d05b0effb4e6f8
    Termination Time: 0
    Application Path: C:\Program Files (x86)\Microsoft Office\Office15\OUTLOOK.EXE
    Report Id: bf3cde85-c702-11e4-a8c6-485ab6f00dbb
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Hang" />
        <EventID Qualifiers="0">1002</EventID>
        <Level>2</Level>
        <Task>101</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2015-03-10T08:52:31.000000000Z" />
        <EventRecordID>14242</EventRecordID>
        <Channel>Application</Channel>
        <Computer>xxxx.xxxx.xxx.nl</Computer>
        <Security />
      </System>
      <EventData>
        <Data>OUTLOOK.EXE</Data>
        <Data>15.0.4693.1000</Data>
        <Data>87c</Data>
        <Data>01d05b0effb4e6f8</Data>
        <Data>0</Data>
        <Data>C:\Program Files (x86)\Microsoft Office\Office15\OUTLOOK.EXE</Data>
        <Data>bf3cde85-c702-11e4-a8c6-485ab6f00dbb</Data>
        <Binary>55006E006B006E006F0077006E0000000000</Binary>
      </EventData>
    </Event>
    Copied body to Word, spellcheck crashes Word:
    Log Name:      Application
    Source:        Application Hang
    Date:          10-3-2015 9:57:15
    Event ID:      1002
    Task Category: (101)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      xxxx.xxxx.xxx.nl
    Description:
    The program WINWORD.EXE version 15.0.4693.1000 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
    Process ID: 964
    Start Time: 01d05b0fe8e683af
    Termination Time: 0
    Application Path: C:\Program Files (x86)\Microsoft Office\Office15\WINWORD.EXE
    Report Id: 6a7dd15f-c703-11e4-a8c6-485ab6f00dbb
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Hang" />
        <EventID Qualifiers="0">1002</EventID>
        <Level>2</Level>
        <Task>101</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2015-03-10T08:57:15.000000000Z" />
        <EventRecordID>14247</EventRecordID>
        <Channel>Application</Channel>
        <Computer>xxxx.xxxx.xxx.nl</Computer>
        <Security />
      </System>
      <EventData>
        <Data>WINWORD.EXE</Data>
        <Data>15.0.4693.1000</Data>
        <Data>964</Data>
        <Data>01d05b0fe8e683af</Data>
        <Data>0</Data>
        <Data>C:\Program Files (x86)\Microsoft Office\Office15\WINWORD.EXE</Data>
        <Data>6a7dd15f-c703-11e4-a8c6-485ab6f00dbb</Data>
        <Binary>55006E006B006E006F0077006E0000000000</Binary>
      </EventData>
    </Event>

  • Maintenance view subset P = S in combination with a non-key.

    We are trying to create a maintenance view with subset selection based
    on a non-key field. However no dialog screen will be created in order to
    select the right data (subset) for list display. We found a referenced
    note of this problem: sap note nr 624459 "subset field is not
    transferred" which is already available in the L7D system.
    -> Does the subset P = S only work in combination with a key field?

    Hi,
    I presume the P = S works for only Primary Key combinations. For eg: If you create maintenance view on MARD table and give values P= S to say only MATNR and WERKS fields. You generate the Table Maintenance. You get the filter for Material and Plant but there is a button F7 new selection .. if you press that you can select the third key field Storage Location as well. Presumably it works for the key fields alone.
    Cordially,
    Shankar Narayanan.

  • Creation of IBASE (TA IB51) with ABAP

    Creation of IBASE (TA IB51) with ABAP
    Posted: Sep 29, 2005 8:47 AM      Reply      E-mail this post 
    Hello all,
    i want to create an IBASE with Instances (Materials) with Abap.
    It is possible to create the IBASE but not to create the instances. I have always an empty IBASE without materials.
    Can anybody help me
    Thanks a lot
    Markus
    Here is my coding:
    type-pools ibin .
    type-pools IBCO2.
    data: ibib_handle type i.
    data: E_IBASE_REC TYPE IBCO2_IBASE_REC.
    data: I_IBIB1 LIKE IBIB1.
    data: I_IBIBT1 LIKE IBIBT1.
    data: matobject type ref to cl_ibase_r3_material.
    data: i_PROCESS_REC TYPE IBXX_PROCESS_REC.
    data: C_INSTANCE_TAB TYPE IBCO1_INST_TAB1.
    data: c_inst_struct type ibco1_inst_rec1.
    CALL FUNCTION 'IB_COM_NEW'
    IMPORTING
    E_IBCO_HANDLE = ibib_handle.
    CALL FUNCTION 'IB_COM2_CREATE_IBASE'
    EXPORTING
    I_IBCO_HANDLE = ibib_handle
    I_IBTYP = 'Y1'
    IMPORTING
    E_IBASE_REC = E_IBASE_REC
    EXCEPTIONS
    IB_HANDLE_NOT_DEFINED = 1
    OTHERS = 2.
    clear: i_ibib1, i_ibibt1.
    move-corresponding e_ibase_rec-com to i_ibib1.
    move-corresponding e_ibase_rec-conf to i_ibib1.
    i_ibib1-ibase = e_ibase_rec-ibase.
    i_ibib1-extid = 'externer Name'.
    *i_ibib1-authg = 'E001'.
    i_ibibt1-ibase = e_ibase_rec-ibase.
    i_ibibt1-langu = sy-langu.
    i_ibibt1-descr = 'Beschreibung'.
    CALL FUNCTION 'IB_COM1_CHANGE_IBASE_ONLY'
    EXPORTING
    I_IBCO_HANDLE = ibib_handle
    I_IBIB1 = i_ibib1
    I_IBIBT1 = i_ibibt1
    EXCEPTIONS
    IB_HANDLE_NOT_DEFINED = 1
    OTHERS = 2.
    create object matobject exporting i_matnr = '000000000000602028'.
    clear i_process_rec.
    i_process_rec-activity = '1'.
    i_process_rec-ind_valfr = 'X'.
    i_process_rec-ind_valto = 'X'.
    i_process_rec-ind_sortf = 'X'.
    i_process_rec-ind_amount = 'X'.
    i_process_rec-ind_unit = 'X'.
    i_process_rec-ind_objtyp = 'X'.
    i_process_rec-ind_objid = 'X'.
    i_process_rec-ind_serno = 'X'.
    i_process_rec-ind_plant = 'X'.
    i_process_rec-ind_batch = 'X'.
    i_process_rec-ind_revlv = 'X'.
    i_process_rec-ind_deviceid = 'X'.
    i_process_rec-ind_posno = 'X'.
    refresh c_instance_tab.
    c_inst_struct-val-valfr = '20050929080000'.
    c_inst_struct-val-valto = '99991231235959'.
    c_inst_struct-com-amount = 1.
    c_inst_struct-com-unit = 'ST'.
    c_inst_struct-objtyp = '0002'.
    c_inst_struct-object = matobject.
    INSERT c_inst_struct INTO TABLE c_instance_tab.
    CALL FUNCTION 'IB_COM1_PROCESS_INSTANCE'
    EXPORTING
    I_IBCO_HANDLE = ibib_handle
    I_IBASE = e_ibase_rec-ibase
    i_moment = '20050929080000'
    I_PROCESS_REC = i_process_rec
    CHANGING
    C_INSTANCE_TAB = c_instance_tab
    EXCEPTIONS
    IB_HANDLE_NOT_DEFINED = 1
    IB_NO_ACTIVITY = 2
    IB_NOTHING_PROCESSED = 3
    IB_INCONSISTEND_DATA = 4
    IB_INSTALL_NOT_ALLOWED = 5
    OTHERS = 6.
    CALL FUNCTION 'IB_COM_SAVE_AND_FREE'
    EXPORTING
    I_IBCO_HANDLE = ibib_handle
    EXCEPTIONS
    IB_HANDLE_NOT_DEFINED = 1
    IB_NOT_SUCCESSFUL = 2
    OTHERS = 3
    write: e_ibase_rec-ibase.
    commit work.

    Remark: We have SAP R3 Release 4.6c

  • Change of sales order in combination with planned/released production order

    Hi Guru's,
    How do you deal with changes in the sales order in combination with planned orders and the scenario how to deal with release production orders?
    Can you tell me the SAP scenario, technically or reports or transactions or user exits, etc?
    Thank you in advance,
    Eric

    Here You have 2 scenarios
    1. Sales order changed at planned order stage
    In this case any chagne of quantity done in the sales order level will be taken care by the Planned order until it was not firmed .
    In case if it was firmed for the increased qty you will get a new planned order getting created.
    In case if it is reduced and if it was unfirmed it will get changed accordingly
    2. Sales order changed at production  order stage
    if the planned order was converted to production order change we can manually changes the respective Production order util no confirmation was done to any operations..
    is all this scenariors you are looking for if it is helpful let me know
    thanks..
    dskumar

  • Use of business partner functionality in combination with dual control

    Is there a generally agreed upon procedure to use the business partner functionality in combination with dual control? The problem is that when you block a business partner, the customer/ vendor master data aren't blocked automatically. You can then still use them in transactions, which leads to problems.
    So is there a way to make this work or a procedure to do this?
    Niels Vanwingh

    Thanks Masa,
    I did notice the 'Add external supplier from' in create supplier or bidder option. However there is a small catch and your experience may help.
    Let me explain the requirement and scenario here in SRM 7.
    We are implementing the Registration of Supplier scenario; both ROS and SRM are in same client. When a potential supplier registers themselves in the registration system, a BP number is created (an Internal number range is defined for this). After accepting the potential supplier in pre-select screen the purchaser has two options to transfer the potential supplier from the ROS system to SRM
    Option 1: He can select the accepted potential supplier from the supplier directory option and transfer the business partner to SRM. In this case the business partner number of the potential supplier is retained in SRM and a business partner with supplier and bidder tag is created. However the purchaser does not have any option to select which type of business partner he would like to create like supplier or bidder.
    Option 2: Purchase can go to create supplier or bidder option and choose the u2018Add external supplier formu2019 from the ROS system and create the business partner. The ROS business partner details are copied to the create supplier screen, but the purchaser have to provide an external business partner number for the supplier. This is because we have defined external number range for business partner for the vendors that are replicated from ERP to SRM.
    Objective is the ROS business partner should be retained in SRM with option to create as supplier and bidder and then manually create ERP supplier with same SRM BP number and map against SRM supplier.
    Is there any way we can achieve this?
    In SRM 5.5 with Manage business partner functionality we could achieve as system give us the option which business partner type we would like to create as well as retains the ROS BP number in SRM.
    Regards
    Sandeep

  • Hash tables in combination with data references to the line type.

    I'm having an issue with hash tables - in combination with reference variables.
    Consider the following:  (Which is part of a class)  -  it attempts to see if a particular id exists in a table; if not add it; if yes change it.   
      types: BEGIN OF TY_MEASUREMENT,
               perfid      TYPE zgz_perf_metric_id,
               rtime       TYPE zgz_perf_runtime,
               execount    TYPE zgz_perf_execount,
               last_start  TYPE timestampl,
             END OF TY_MEASUREMENT.
    METHOD START.
      DATA:  ls_measurement TYPE REF TO ty_measurement.
      READ TABLE gt_measurements WITH TABLE KEY perfid = i_perfid reference into ls_measurement.
      if sy-subrc <> 0.
        "Didn't find it.
        create data ls_measurement.
        ls_measurement->perfid = i_perfid.
        insert ls_measurement->* into gt_measurements.
      endif.
      GET TIME STAMP FIELD ls_measurements-last_start.
      ls_measurement->execount = ls_measurement->execount + 1.
    ENDMETHOD.
    I get compile errors on the insert statement - either "You cannot use explicit index operations on tables with types HASHED TABLE" or "ANY TABLE".      It is possible that.
    If I don't dereference the type then I get the error  LS_MEASUREMENT cannot be converted to the line type of GT_MEASUREMENTS.
    I'm not looking to solve this with a combination of references and work ares - want a reference solution.   
    Thanks!
    _Ryan
    Moderator message - Moved to the correct forum
    Edited by: Rob Burbank on Apr 22, 2010 4:43 PM

    I think it might work when you change it for
    insert ls_measurement->* into TABLE gt_measurements.
    For hashed table a new line here will be inserted according to given table key.
    Regards
    Marcin

  • Is an Air 13,3 (1.8 Core i7) in combination with an apple tv 2 (with xbmc) and a new time capsule a good combo to have a flawless mediacentre / network?

    Hi there,
    I ordered a mac Air and now looking into the possibilities to have a nice mediacenter / network setup.
    Already searched the net but mostly finding posts about older airs, apple tv and tc's. Some of them not very positive as in the tc in combination with the air being slow etc.
    What advise can you people give me in this?
    Any input is highly appreciated!

    Hi there,
    I ordered a mac Air and now looking into the possibilities to have a nice mediacenter / network setup.
    Already searched the net but mostly finding posts about older airs, apple tv and tc's. Some of them not very positive as in the tc in combination with the air being slow etc.
    What advise can you people give me in this?
    Any input is highly appreciated!

Maybe you are looking for