Combining SharePoint with Lync UCWA

Hi everyone,
i have successfully built a little Lync UCWA application with JavaScript that shows the user and his profile and is running in our SharePoint.
Everything works fine, but what doesn't work as expected is the single sign on. I have to put in my credentials two times:
Once for the SharePoint and once for the Lync Login. Also some Users cannot log in at all.
We also have the normal Lync client running in the background with also the same credentials which works fine with presence and other features. Showing the presence like in lists is also possible and working.
I have already asked this question in the Lync-Forums and was redirected to this one.
Thanks in advance,

Hi,
According to your description, my understanding is that you want to combine the SharePoint with lync UCWA application without repeating to enter credentials if you have configured single sign on.
As you are using UCWA Web API to get lync data , it always need the authentication firstly to get access to the data, so it needs to enter credentials. And if you are call data cross domain, it can't be used single sign on as the UCWA will need credential.
Would you please share some code, then it can help us to figure out what you are using.
Here are some detailed articles for your reference:
Authentication in UCWA
UCWA by the numbers – #2 Authentication
Best Regards,
Jerry Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

Getting a 502 Bad Gateway when trying to run a POST request for application on Lync UCWA on VPN

I am getting a 502 Bad Gateway when trying to run a POST request for application info on Lync UCWA ("Policy prevents request from being proxied."). When I do a request without SSL, I get a 403 - Forbidden: Access is denied.
Is this becouse I am on VPN and not on the internal network? There are some policy on VPN or the IIS internal that denies me access?
I have not tried it internal yet. Anyone else with this experience?

Did you figure out your issue? I'm having a similar issue. Even thought I'm able to successfully sign-in to the Lync Server and obtain a Bearer token, I'm not getting any response from the server when sending a POST request to the application URI (https://<pool_fqdn>/ucwa/oauth/v1/applications).
Wondering if it's a policy issue and if so, why user policy affects this access?
thanks.

How to know if an installation was made with Lync Standard/Enterprise or with "Multitenant Hosting Pack"?

Hi everyone!
I have 2 Lync Server Setups. In 1st setup I have deployed "Lync Server 2013 Multitenant Hosting Pack" and in 2nd setup I have deployed "Lync Server 2013 Standard Edition". Both Setups
are isolated and have their independent SQL servers and ADs. Now the problem is I am unable to get the edition of Lync Server through powershell.
When I run Get-CsServerVersion command, it returns same output on both setups.
#For Lync Hosting Pack
PS C:\Users\administrator> Get-CsServerVersion
Microsoft Lync Server 2013 (5.0.8308.0): Volume license key installed.
#For Lync Standard
PS C:\Users\administrator> Get-CsServerVersion
Microsoft Lync Server 2013 (5.0.8308.0): Volume license key installed.
What can be the way to determine the edition of Lync Server through Powershell or .NET?
Thanks in advance.
Rizwan Ahmed. Software Engineer - Microsoft Lync | Exchange | SharePoint | Blackberry Enterprise Server | .NET

Hi,
So far, I don’t know how to identify with Lync Powsershell or .NET as well.
However, you can identify from Lync Server Control Panel. For Lync Server Multitenant Hosting Pack, it is incompatible with Lync Server Control Panel, this means you should use the Lync Server Control Panel only in read-only mode. For example, enabled
users are not displayed in the User section of the Lync Server Control Panel. So you can identify with the way of enabling users on Lync Server Control Panel, Lync Server Standard/Enterprise Edition will show the users on Lync Server Control Panel.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

How to combine BOMs with Free Goods?

Dear all.
I am currently working on setting up a retail store in SAP ERP (6.0). Our client requires from us creating a functionality that would allow to create sets and add free goods to a certain set. For example: if you buy a set consisting of a hammer and a drill at a regular price, you get a pair of gloves free of charge.
We used BOMs to create the sets and attempted to combine them with Free Goods, which prooved impossible -- FGs don't work with BOMs. We also tried to use Bonus Buys, but these seem to be working only with SAP Retail, which is not available to us.
Do you know any way around this problem?
Grzegorz

Shantanu
It sounds pretty helpful, however, what we just found out it is impossible to give away free goods according to the local tax standards - so we have to give them away for a fraction of the price rather than free of charge. This forced us to create a separate logic to deduce different item categories in a sales order and different prices according to that.
Thanks anyway.
Grzegorz

Microsof VX 3000 or 6000 Webcam does not work with Lync 2013 under Windows 8.1

Hi,
The problem is that i cannot use the Microsoft VX-3000 or VX-6000 with Lync 2013 under Windows 8.1.
If i go in settings under Video i can see the preview from the webcam just fine, so it works there no problem.
Wenn i try to enable my camera in a conference it does not work, i get an error: Your video cannot be started.
Now, there are no Windows 8.1 drivers for the Webcam so i installed the latest Windows 7 drivers. Because of that this webcam does not work with apps, that is fine i understand the driver problem and the way the new apps work.
But this Webcam works with skype under Windows 8.1 and it works with Lync 2010 client.
The same Webcam works just fine with Lync 2013 under Windows 7.
Is there anything i could do so that i get this Webcam to work with Lync 2013 desktop client under Windows 8.1?
Thanks

Hi,
According to your description, it may be caused by driver.
You can try to install the latest version of Display Driver to fix the display issue.
Since there is no driver for Windows 8.1, I suggest you wait for updating.
You can also post a case on Windows 8 forum, thank you for your understanding:
http://social.technet.microsoft.com/Forums/en-US/home?forum=W8ITProPreRel%2Cw81previtpro&filter=alltypes&sort=lastpostdesc
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Combining results with a Query of Queries - NOT QUITE THERE!!!

I have included a small sample of my database, specifically the four tables I am trying to work with in the hopes that someone can steer me down the right path. Here are the four tables and the bottom is a visual desciption of what I am trying to achieve;
ORDERS
SALES CALLS
ID
SaleDate
TerritoryManager
UserID
SaleDate
TerritoryManager
ID
UserID
426
01-Oct-09
Mike B
10112
10/1/2009
Mike B
253
10112
427
01-Oct-09
Russ C
10115
10/1/2009
Mike B
254
10112
430
01-Oct-09
Jerry W
10145
10/1/2009
Mike B
255
10112
432
01-Oct-09
Ron H
10118
10/1/2009
Mike B
256
10112
433
01-Oct-09
Ron H
10118
10/1/2009
Ron H
257
10118
10/1/2009
Ron H
258
10118
PRODUCTS ORDERED
10/1/2009
Ron H
260
10118
OrderID
Quantity
NewExisting
UserID
10/1/2009
Russ C
261
10115
426
12
0
10112
10/1/2009
Mike B
267
10112
427
2
0
10115
10/1/2009
Mike B
268
10112
427
3
1
10115
430
1
0
10145
USERS
430
1
0
10145
TerritoryManager
Zone
UserID
432
1
0
10118
Mike B
Central
10112
432
1
0
10118
Russ C
Central
10115
432
1
1
10118
Jerry W
Central
10145
432
1
1
10118
Ron H
Central
10118
433
2
1
10120
Don M
Central
10120
Central Zone
Ttl Calls
Ttl Orders
Ttl Items
Ttl New Items
Mike B
5
1
12
1
Russ C
1
1
5
Jerry W
1
2
Ron H
3
2
6
3
I have tried to achieve this result in many ways to no avail. If I try to combine PRODUCTS ORDERED with ORDERS I get an erroneous count. I finally resigned myself to getting all the info I needed with separate queries and then trying to combine them with a query of queries. This worked fine until the last query of queries which timed out with no results. I am a newbie and would appreciate any constructive help with this. I am including my queries below as well;
<cfquery name="qGetOrders" datasource="manna_premier">
SELECT Count(Orders.ID) AS CountOfID,
       Orders.UserID AS Orders_UserID,
    Users.UserID AS Users_UserID,
    Users.TMName
FROM Users INNER JOIN Orders ON Users.[UserID] = Orders.[UserID]
GROUP BY Orders.UserID, Users.UserID, Users.TMName;
</cfquery>
<cfquery name="qGetSalesCalls" datasource="manna_premier">
SELECT Count(Sales_Calls.ID) AS CountOfID,
       Users.UserID AS Users_UserID,
    Users.TMName,
    Sales_Calls.UserID AS Sales_Calls_UserID
FROM Users INNER JOIN Sales_Calls ON Users.[UserID] = Sales_Calls.[UserID]
GROUP BY Sales_Calls.UserID, Users.UserID, Users.TMName;
</cfquery>
<cfquery name="qGetProducts" datasource="manna_premier">
SELECT Count(ProductOrders.OrderID) AS CountOfOrderID,
       Sum(ProductOrders.Quantity) AS SumOfQuantity,
    Sum(ProductOrders.NewExisting) AS SumOfNewExisting,
    ProductOrders.UserID
FROM Orders INNER JOIN ProductOrders ON Orders.[ID] = ProductOrders.[OrderID]
GROUP BY ProductOrders.UserID;
</cfquery>
<cfquery name="qqCombOrd_Prod" dbtype="query">
SELECT *
FROM qGetOrders, qGetProducts
</cfquery>
<cfquery name="qqCombOrd_ProdtoSales" dbtype="query">
SELECT *
FROM qqCombOrd_Prod, qGetSalesCalls
</cfquery>
PLEASE HELP!!! I'm about to go scouting for bridges to leap from!

You might be able to simplify that query by getting rid of the subqueries. Something like this
SELECT TerritoryManager
, count(sc.userid) totalcalls
, sum(po.quantity) total
, sum(newexisting) totalnew
, count(o.userid) totalorders
from users u join salescalls sc on u.userid = sc.userid
join orders o on u.userid = o.userid
join productorders po on u.userid = po.userid
where userzone = 'CENTRAL'

Configuring Level3 SIP trunk with Lync 2013

Hi, I ran into some issues trying to configure SIP trunk from Level 3 and I was hoping someone here can help. We have our mediation server collocated with FE and SIP traffic goes from public IP, port 5060 via NAT, to local IP on FE, port 5060.
Level 3 provided us with one signaling IP and two RTP IPs.
I tried multiple trunk configuration settings and I can see that when I'm placing a call from Lync to an outside number I'm getting INVITE from Level 3 signaling IP, the session is established, phone rings, but there is no audio on either side. There's also
a METHOD NOT ALLOWED message coming from them, which doesn't tell me much about what's happening.
If I call to a Level 3 DID (assigned to my Lync user account) there's also INVITE from their side, but later I receive a CANCEL from them due to idle session. The phone never rings.
Questions:
1) Does anyone have Level 3 SIP trunks configured and can share their Get-TrunkConfiguration settings? What settings should I have for encryption, refer, sessionTimer / RTCP, and others? Level 3 refuses to provide any additional information besides IPs.
2) Do I understand this correctly that when configuring PSTN gateways in topology, one of the RTP IPs should be entered in the "alternate media IP" field? We have SIP trunks from another provider (which work fine), and they only use one IP
for everything, so I don't have any experience configuring separate SIP and media IPs with Lync.
Thanks, and let me know if I should provide additional info.

Hi,
On Lync topology PSTN gateways interface, please check if you enter gateway listening port 5060 and enable TCP option.
Please also check if you enable refer support on Lync Server Control Panel, if you enable it please uncheck it.
You can compare the trunk configuration for Level 3 in the part “Sample Trunk Configuration for Level 3” in the link below with yours’, it is for Lync server 2010 but similar for Lync server 2013:
http://blogs.technet.com/b/nexthop/archive/2013/04/10/configuring-lync-2010-server-to-work-with-level-3-sip-trunking-services.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Is it possible to combine JQuery with Captivate?

Hi there,
I'm using Captivate version 6 on a Mac OSX 10. I am creating an elearning resource for a client and most of their staff will be accessing it via iPads and iPhones, so I want to publish it using HTML5. They'd like to add a couple of drag and drop tasks (they don't need to be assessed) but the only way I can see to do this is via the Infosemantics widget. I've bought this and used it for previous projects, and it works well as a drag and drop, but obviously doesn't work on an iPad with it being Flash based.
I've seen that I can create a drag and drop exercise using JQuery, but then I don't know how I can combine this with Captivate to make one seamless presentation. Once the HTML5 has been published is there a way of bringing other HTML pages into it? Or could javascript be used within Captivate?
Does anyone have any suggestions?
Thanks in advance for any help.

There is a website, whose name escapes me ( I am at work ) which people submit to in a variety of languages and various formats such as Extended Cut, Directors Cut etc so that you have no need to mess about with them, just add them. Also, as I said above, some are just for non-English parts so don't show subtitles if the dialogue is in English.
Edit: found it. I use http://subscene.com/

How to combine rows with small numbers into single "other" row?

How can I combine rows with value 6(for example) or lower to single row representing the SUM of all this values and label OTHER, so the pie chart will have a chance to display all small values combined?
I'm using Numbers 09

HI Peter,
When you write a decimal number, is the decimal separator a period ( . ) or a comma ( , )? If it's a comma, then the syntax error can be corrected by replacing the list separator in the formula, a comma in Jerry's formula, with a semi colon ( ; ):
=SUMIF(B; "<6"; B)
(Added): The two Bs appear in blue 'lozenges' in Jerry's image because that is the way cell (or column) references are displayed in Numbers when a formula has correct syntax.
Regards,
Barry
Message was edited by: Barry

Combined delivery with different delivery dates:

Combined delivery with different delivery dates:
We are experiencing a problem when doing combined delivery from multiple orders of the same ship to party.
All the requirements are being met (for the order combination) accept the Delivery dates.
Sometimes an order Qty is confirmed on the 1at of a month , then the second order qty is confirmed on the 15th of the month. But when we want to make the combined delivery , the delivery dates differ and the user has to go into the individual order ans changes the dates.
Is there a way to make the combination, the system not taking in account the delivery dates? Because we have huge no. of orders to combine. Please guide.
Regards,
Mansur.

Dear Mansur,
I think there is no any solution exaclty map with your problem in standard SAP.
Better you control based on the MRP type, not sure. And also check with availability check and tranfer of requirments.
Thnx,
Pratik

Need information for federation with lync online

We have an online lync account and one lync on premises account. We are trying to federate the two domains to enable chat and presence sharing between the two.
Online Lync client is [email protected] and lync on premises client is [email protected] We have updated the SRV records for ggnucfederation.com as follows to enable federation with lync online.
_sipfederationtls._tcp.ggnucfederation.com --> sip.xmppspark.in
An A record for sip.xmppspark.in has also been added in the DNS to point to lync edge server. However we notice that, when we add
[email protected] from lync online, then no TLS handshake message is received at Lync edge server.
Interestingly, if we modify the SRV record to
_sipfederationtls._tcp.ggnucfederation.com --> sip.ggnucfederation.com
and correspondingly create A record for sip.ggnucfederation.com, then TLS handshake is initiated and done.
What could we have possibly missed that is causing problem in the first case? Is it necessary to create the SRV record of type sip.<domainname>?
As per my understanding, lync online should query the srv record to get the target machine for the sipfederationtls and accordingly initiate tls handshake with the host name specified in the srv record. Is there anything more to this?

Not sure what you mean bu "Any other SRV record" above. The bottom line is that, On Prem deployment have an SRV (_sipfederationtls) record that resolve in to sip.domain.com (Access edge FQDN which is a A record) and Lync online deployment should
also have a SRV record (_sipfederationtls) that resolve in to sip.domain.com (CNAME Record) which points to sipfed.online.lync.com (A record which ger created automatically)
http://thamaraw.com
Thanks Thamara for your replies!
By 'any other SRV record' i meant, that I wish to make the srv record (_sipfederationtls._tcp.ggnucfederation.com) point to sip.xmppspark.in. The reason for this is that our certificates are by this CNAME i.e. sip.xmppspark.in. So there is any way I could
achieve that?
Interestingly, does this restriction only applies to lync 2013 and office 365? I mean, I was going through some other forums, for lync 2010, where I found that people were using access edge fqdn as the sip srv record which was not necessarily sip.domain.com.

How to combine sound with video to an AVI Using IMAQ?

I need to combine sound with video I capture and write it out as an AVI. Is there anyway in Labview to combine sound with and AVI? Or an easy to use third party product?

Hello,
The AVI tools that are provided with Vision allow for data to be added to your video. Sound information can be stored this way, but if you are looking for a way to add audio support to your video (such that it will play the sound file when the video is played in Windows Media Player or other applications) you may want to look into finding a shareware or freeware product that can accomplish this. LabVIEW does not have tools specifically targetted to this operation.
Good luck,
Robert

Configuring spa112 with Lync 2013

Hello all,
Does anyone know how I can configure an SPA112 to use Lync 2013 with an analogue extension please? I see registration attempts from the SPA112 but they don't seem to be successful and I get no dial tone when I pick up the analogue handset.

I have no experience with Lync, but catch the SIP packets. The REGISTER packet and response to it should help you to analyze the issue.

Combine Analysis with Design Studio

Greetings,
I know it's possible to export an Analsys Application from Analysis for OLAP. You can then open it in Design Studio to edit it.
However, is it possible to "embed" an analysis in Design Studio?
We would like to be able to swap the axis, drilldown, change the members, etc. and combine it with Design Studio layouts.
If not, is there anything on the roadmap? This is preventing us to move from Bex WAD 3.x...

Hi Nadim,
with Design Studio and the scripting you are able to add so much functionality within your dashboards that I don't see that big gap between these two applications.
For exampe: You can add a filter panel where you are not only able to set filter but additionaly chose which measures should be displayed and whether they will be added as columm or row.
So it is possible within Design Studio to swap axis, change the members and do (little) drilldown.
But for drilldown-functionality you will have to use scripting and it is indeed still not as good as in Analysis. So one of my wishes for a future release is to enhance the drilldown-functionality (without much scripting or using multiple data sources) like in Analysis.
But you are right, DS is a tool to consume the data, many of these functionalities to analyse data have to be scripted which is some effort for each dashboard and every used query.
Some more integrated analysis functionality would be great.
(Maybe a better solution than to "embed" an anaylisis?)
Nevertheless I would like to see some export/switch function to open a query in Analysis (for Office), too. You are able to integrate links to an external URL so why Design Studio is not able to add a link to the Analyis-Application?
I know that some customers want to see their data in Excel, they would really appreciate the possibility to press a button to jump directly to Analysis for further survey of their data.
Regards
Steffen

Can I combine .pdf with basic subscription?

can I combine .pdf with basic subscription?

There is no "basic" or "full" subscription; there are different subscription plans like ExportPDF, PDF Pack, and other services. See https://www.acrobat.com/
To combine PDF files you need the PDF Pack.

Combining SharePoint with Lync UCWA

Similar Messages

Maybe you are looking for