Command + delete not working in Preview

I use the Command + Delete keyboard shortcut all the time on my MacBook Pro running Mountain Lion to quickly delete multiple images in preview. The shortcut seems to be disabled on my iMac running SL, however. To the best of my knowledge it used to work before. How do I fix this?

⌫ is the symbol for the erase to the left (normal delete) key
⌦ is the symbol for the erase to the right (sometimes, also labeled delete) key
From Keyboard Viewer From Apple Store picture

Similar Messages

Command+Delete not working in iTunes 10.1.2

Just noticed this since updating. The 'Delete' option under 'Edit' is not selectable and the Command+Delete option yields no results.
Anyone else have this problem?

It's been intermittently working for me. Dragging the song to the Trash does not work either. Usually a restart takes care of it but I've also repaired permissions as well as an Archive and Install of the OS. Odd.

Delete command does not work

delete command does not work.. it just freezes neither roll back happens.. please advice

Always: If possible, give the exact command & output from your terminal, pefrerrable with copy & paste. We cannot see your screen and magically spot the problem.
In general, you should also include your database version and OS, although I doubt that this is relevant in this particular case.
Kind regards
Uwe Hesse
http://uhesse.wordpress.com

Some PDFs not working in Preview. Mac created PDFS work but windows created PDFS dont

Some PDFs not working in Preview. I installed adobe reader and then deleted it because the software was aweful and PDFs have been haveing issues ever since. I can open up PDFs created on my Mac in preview just fine...
But when I try and open a PDF created on a windows computer it says:
"Please wait...
If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document.
You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/products/acrobat/readstep2.html.
For more assistance with Adobe Reader visit http://www.adobe.com/support/products/ acrreader.html.
Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries. "
I am not sure why where the PDF was created would make a difference but couldnt help but notice that was the difference between the PDF files that work and the ones that give that message. I can view the PDFs on a windows computer just fine and never had issues untill adobe, it seems to have messed up PDFs on my Mac and I am so frustrated with them. I have searched my computer for any remaining adobe files, deleted them and restarted my computer but I am still getting this message.

Uninstall Adobe Reader's plug-in.
Remove the following two files from /Library/Internet Plug-Ins/:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Open Safari Preferences > Extensions. Do you see AdobePDFViewer? If yes. disable.
Log out/in and test.
Another option is to download and install this plugin. Schubert|it PDF Browser Plugin . PDF Browser Plugin 2 is free for not-for-profit activities if used at home or at educational institutions.
http://www.schubert-it.com/pluginpdf/

6120 classic:My voice commands do not work

Please help.
Don’t know if I'm just being stupid or there is something not right with my 6120c.
My voice commands do not work.
If I press the button for a voice command, it says that there are no voice tags saved.
If I go into the voice command application (Which should create the voice tags on opening), I cant playback the voice tags, its give a 'voice system error' error message.
Is there something that is not set up properly? In the voice command settings, the synthesizer is 'on'?
Also, I don’t have voice tags on my contacts??
I read somewhere that this is a firmware problem and the phone should be taken back to nokia. Is this the case?
Somebody please help.

I formated my nokia n6120 using the code *#7370#. It deletes !everything! (settings, aplications...), but I have no voice sytem error now.

Host command is not working on linux

Hi
I m using linux for application server n windows for client. I need to create folder from client machine by cliking a button of forms10g runtime.HOST command is not working which was working fine in windows.
Any help is appriciateable.
kazi mokarem

Hi
I had the same issue on linux a few weeks back. What tuned out was, when you install the Oracle app svr it does not include the system paths by default.
The path where mkdir is located may not be visible to the app.
Try to hardcode the path for mkdir as /bin/mkdir .... and seee if that works.
If the above statement works then add that path in the paths variable in default.env file located in $ORACLE_HOME/forms/server directory
HTH
Arvind

External command is not working in File Receiver Adapter

Hi,
   I have tried to copy the file which is mentioned in my File Adapter (Receiver) to 3 different folders thru OS command. The purpose is to save time. I have created one CC for Source(File) and one CC for target(File). After the target file is created, I want to copy this file in 3 folders. For this I have written one batch file in my system.
File Name: copy1.bat
@ECHO OFF
COPY %1 C:\TEST1\arch_t1
COPY %1 C:\TEST2\arch_t2
COPY %1 C:\TEST3\arch_t3
DEL %1
The command which I entered in the Receiver CC (File Adatper is)
Run Operating System Command After Message Processing
Command Line: C:\FILES\copy1.bat %F %f
Timeout(secs): 60
Terminate Program After Timeout - Check box is selected.
But, this external command is not working. (because the target files are not created in those directories C:\TEST1, C:\TEST2, C:\TEST3)
   I did this scenario by refering the Michael'w weblog:
/people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions
   In this blog, he has also given how to troubleshoot external command. I tried this also. It is not working.
    I use Windows XP OS. XI 3.0 SP 18.
   Friends, Could you kindly tell why this external command is not working? What could be the problem?
Thanks in advance.
Kind Regards,
Jeg P.

Hi, Jeg.
As the note says, please check the java Runtime.exec behavior
with the proper user.
If in doubt, check if the command can be successfully run through
the Java Runtime.exec(...) API. Also note that the command is run
as user "<sid>adm" (Unix) / "SAPService<SID>" (Windows).
So, Could you check the following(very dirty one!) Java in your
XI server and check if it works? For simulating %F, create a test
file C:\FILES\test.txt whatever the content is.
import java.util.*;
import java.io.*;
public class ExecJava {
public static void main(String args[]) {
    try {
      Runtime rt = Runtime.getRuntime();
      Process proc = rt.exec("C:/FILES/copy1.bat C:
FILES
test.txt");
    } catch (Exception e) {
      e.printStackTrace();
Good Luck.
Sejoon

Why export audio to movie command not visible and detect cuts command is not working in 64bit mode?

Does anyone know why export to audio disappear from menu in 64bit mode?
Why detect cuts command is not working well in 64 bit mode?
I tested on several machines (brand-new iMac, brand-new MacPro with 10.8 OS, MacPro with 10.6.8),and everythig wotks in 32 bit mode. As I switch to 64 bit mode detect cuts only put one marker at the begening of film.
I also noticed that Firewire output option in 64bit mode is not avaible.
Is there a certain film format that I have to use to make it work? I tried DV PAL, but I had ther same result.
Thanks a lot.

Hi
Those functions are not available when Logic is running in 64bit mode
http://support.apple.com/kb/TS3171
CCT

Java command still not working - please help

i have installed jdk1.6.0_05. The javac command works fine but the java command does not work at all. even when i try java HelloWorld i receive this exception message
Exception in thread "main" java.lang.NoClassDefFoundError: HelloWorld
Caused by: java.lang.ClassNotFoundException: HelloWorld
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
please help (you to SUN)!!

bart@kerberos:~$ javac -help
Usage: javac <options> <source files>
where possible options include:
-g                         Generate all debugging info
-g:none                    Generate no debugging info
-g:{lines,vars,source}     Generate only some debugging info
-nowarn                    Generate no warnings
-verbose                   Output messages about what the compiler is doing
-deprecation               Output source locations where deprecated APIs are used
-classpath <path>          Specify where to find user class files and annotation processors
-cp <path>                 Specify where to find user class files and annotation processors
-sourcepath <path>         Specify where to find input source files
-bootclasspath <path>      Override location of bootstrap class files
-extdirs <dirs>            Override location of installed extensions
-endorseddirs <dirs>       Override location of endorsed standards path
-proc:{none,only}          Control whether annotation processing and/or compilation is done.
-processor <class1>[,<class2>,<class3>...]Names of the annotation processors to run; bypasses default discovery process
-processorpath <path>      Specify where to find annotation processors
-d <directory>             Specify where to place generated class files
-s <directory>             Specify where to place generated source files
-implicit:{none,class}     Specify whether or not to generate class files for implicitly referenced files
-encoding <encoding>       Specify character encoding used by source files
-source <release>          Provide source compatibility with specified release
-target <release>          Generate class files for specific VM version
-version                   Version information
-help                      Print a synopsis of standard options
-Akey[=value]              Options to pass to annotation processors
-X                         Print a synopsis of nonstandard options
-J<flag>                   Pass <flag> directly to the runtime systemSee the bold part.
More information: [http://java.sun.com/docs/books/tutorial/java/package/managingfiles.html]

Command S not working in Dreamweaver CS6

Command S not working in Dreamweaver CS6

Every time I've run into an issue like this, clearing the cache file has repaired it...
http://forums.adobe.com/thread/494811
As long as it's not a system wide issue that is.

Shift+command+b not working for bold

I just updated to cs6 and my "bold" key command is not working. (shift+command+b on mac) I am using a font that has BOLD. I can select bold from the character palette and it works fine but the key command will not work. I checked my key command list and is there by default. It should work. It worked fine on cs5 for me. I even tried holding the fn key but no dice. Any ideas? I have to bold many many items so I can not possibly use the character palette....thanks.

"Nope" the first word of my response, was to your question. It means No. Meaning "No I did not copy a custom set". I am using default set.
I wonder if some other app has taken that kb shortcut. Nothing happens when I press it though....and I wouldnt know how to find out.
edit - problem solved. Even though the font says that it has a bold face I guess that it does not. Bold still works fine for other fonts. Sorry for your time.
Message was edited by: Emperor1212 - Problem solved.

Some commands are not working nor in illustrator nor photoshop, any advice better than Adobe?

Illustrator is not fuctioning at 100%, some commands do not work ( eg - command open, nor place etc ) and same with photoshop....
Any advice

pcmyhre,
You may try the list, possibly starting with item 7) in 5), which is a list of the usual suspects, which may disturb and confuse Illy so she fails to do even simple things.
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
External media: It is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk, and it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

Ctrl-T command do not work in website with flash

Ctrl-T command do not work in website with flash
== URL of affected sites ==
http://

If the Flash object has focus then key presses are processed by that plugin.
In such cases you need to click outside that plugin (e.g. the menu bar if you can't click on the website) to make the keyboard work.

Shudown command is not working in Solaris 10

I have two Sun Fire V890 server with Solaris 10 Operating System. In both the servers shutdown command is not working. if i am giving shutdown -y -g0 command means server is not responding, at the same time its proceeding init commands.. if i am giving init5 means, server is getting powered off. please give a solution. Thanks in Advance,

Note: This thread was originally posted in the [Servers - General Discussion|http://forums.sun.com/forum.jspa?forumID=830] forum, but moved to this forum for closer topic alignment.

SQL*Plus COPY command does not work

SQL*Plus COPY command does not work in SQL Developer. I am using SQL Developer 1.5.1 on Windows XP.
copy from <source_db_connection> to <target_db_connection> create <target_tab_name> using select * from <source_tab_name>
Does it work on different versions of SQL Developer ?
Anyone had any success in trying COPY command in SQL Developer?
Thanks in advance.

While it hasn't been updated for v1.5, this page lists the supported SQL*Plus commands. COPY is explicitly listed as not supported.
theFurryOne

Command + delete not working in Preview

Similar Messages

Maybe you are looking for