Commitment Management Activation

Dear Gurus,
We need to activate Commitment management in CO area, before activating i must know what are the impacts, from FI module and other modules. if i activate what are all the components need to maintain like master data etc.....,
Appriciated if i get early reply.
Thanks and regards.
Sriram.

Hi,
The only impacts is that for all relevant logistic and FM documents (EMF), you will have CO commitment created and managed afterwards. There is no impact on the master data. If you use EMFs and you want them to create CO comiitment, you'll have to link them to G/L account (which is also defined as cost element) and CO object. If you use only logistic documents (PO/PR), then commitment will be created automatically.
Regards,
Eli

Similar Messages

  • Activate Commitment Management Retroactively

    Hi,
    We would like to activate commitment management for internal orders.  Is there a process or program that exists to allow us to update the PO commitments that already exist?  For example, PO 4500000001 was created with order 12345.  At the time the PO was created, commitments was not active.  Now, we have activated commitment management and want to see the committed PO amount in the commitment line item report for orders.
    Is there a way to do this?
    Thanks
    Kory

    The config help indicates, it becomes active immediately.
    However there is a transaction KO31, This may be relevant to funds management as well. But it does a similar role.

  • Open Item Management activation for GL accounts in ECC 6.00

    Hi Experts,
    There is an issue about Open item Management activation for GL line items of FBLL03 for VAT GL code. Unexpectdly do not check the open item management in VAT GL account Master record while created the GL master record in 2007. Now we activated Open item Management in GL master record for same GL to nulify the balances with setoff account and same reversed after activation. Now issue is how it is possible to activate Open item Management for previously posted documents ? Is there any standard SAP Program for ECC 6.00 Release SAP _APPL 600.
    Please revert.
    Best Rgds
    SumaMani

    Hi PVC,
    I got below mentioned message while execute the suggested program in SAP.Please suggest
    Do not use the report program to set up open item management for the
    account.
    Create a new account with the correct account assignment. Post your
    items to the new account. If you want to use the original account
    number, you must bring the account balance to zero, change the account
    assignment, and repost the items. You can remove the old items by
    archiving the documents.
    Best Rgds
    SumaMani

  • Commitment management settings

    hi gurus,
    can anyone tell me the settings required to activate commitment management in internal orders. 
    When iam trying to create PR/PO for an internal order for which budget is allocated it is not showing the value of PR/PO in commitment items.  What settings are required other then these:
    1) controlling area (activate commitment)
    2) order type (activate commitment)
    3) order (activate commitment)
    siva

    Hi
    I am having the same problem about commitments at internal orders. I have done
    the same settings that Mr. Siva did including KO31.
    Can anyone guide us and tell us about any missing step.
    Regards

  • Non valuated GR and commitment management

    Hello all,
    we have the following problem: we use commitment management in PS. Our Purchase orders have setting for non valuated GR. So the costs are only recorded on PS with the Invoice receipt.
    At month end when posting accruals for goods receipt but not invoice receipts we have the problem, that there is still a commitment from the PO on the project and therefore the accrual to be posted on the WBS element exceeds the available budget (because of the commitment coupled with the accrual we are essentially putting double the budget on the WBS assuming that the Purchase order is for 100% of the budget).
    We cannot get rid of the unvaluated GR as it is a fiscal requirement. We also want to keep the commitment until the Invoice is receipt for obvious budget control reasons. Is there a way to swap the commitment with the accrual to be posted?
    Thanks
    KAi

    the cost element used for accrual posting can be set in the configuration oin PS busdgeting where you can exempt for availability check
    this way the accruals will not be included in the budget check

  • Version Management activation for RFQ

    Dear all,
    We have done all the settings for version management activation in RFQ, But it is not working.
    Can somebody guide me the steps?
    Thanks,
    Samir Bhatt

    hi
    just check the following settings
    spro>Materials Management>Purchasing>Version Management>Set Up Change Displays
    here check which fields u took in account for version changes

  • Im having a problem with my ps elements 8,download manager active x has encountered a problem

    im having a problem with my ps elements 8,download manager active x has encountered a problem
    adobe reader and acro manager has encountered a problem and needs to closed
    -+++reg.exe has encounter a problem
    -invidia graphics driver has stopped working properly.

    Check out this link if any of the information in there can help you move forward:
    http://kb2.adobe.com/cps/400/kb400530.html
    Regards,
    Ankush

  • Ask timesten 11.2 Using Oracle Clusterware to Manage Active Standby Pair

    Using Oracle Clusterware to Manage Active Standby Pairs
    http://download.oracle.com/docs/cd/E13085_01/doc/timesten.1121/e13072/cluster.htm#CCHCFAAD
    What is that mean ?
    I have to use Share Storage for... Oracle Clusterware?
    I think right?... or wrong ?
    Can I have VIP on Master node, and then master down... standby will active with VIP, right ?

    A TimesTen A/S pair is a replicated configuation where a pair of TimesTen datastores, usually located on different machines, act in many ways as a single unit. The active master can process both queries and DML (insert/update/delete) while the standby master can only process queries (think of this as a little like Active Dataguard). Applications that run on the same machine as one of the TT datastores can connect to it via the very high performance 'direct mode' while applications running on other machines can access the datastores in client/server mode. There is a clearly defined procedure for failing over if the active master fails (which involves promoting the standby master to active) and for recovering a failed store back to the correct role. Direct mode applications must failover with the datastore whereas for client/server applications the connection(s) need to be failed over. The basic A/S pair replication mechanism has been available since TimesTen 6.0. The replication configuration is defined via special SQL syntax and monitoring and management (failover control etc.) is performed by way of built-in procedure calls. However, in TT 6.0 and 7.0 the actual monitoring and management of the A/S pair, including failover, is left for the user to implement themselvses or via some custom integration with an external cluster manager.
    TimesTen 11g adds two major new capabilities:
    1. Automatic client connection failover for client/server connections. Think of this as very similar to Oracle DB TAF and FAN. This does not require VIPs or Clusterware since it is implemented completely within TimesTen. However it works very well when used in onjunction with Clusterware.
    2. A deep integration between TimesTen and Oracle Clusterware. All aspects of Timesten A/S pair definition, deployment, management and recovery are handled by Clusterware. There is just a single configuration file and a single TimesTen utility (ttCWAdmin) involved. Of course you need a properly configured Clusterware setup first which will require some form of shared storage (for OCR and voting disks) but TT storage (checkpoint and log files) does not need to be on shared storage. Setting up TT for use with Clusterware is very quick and easy (maybe 30 minutes the first time you do it and much quicker thereafter once you know what you are doing). From then on Clusterware will manage all aspects of failover and recovery completely automatically. VIPs are not required but can be used if desired e.g. for application failover purposes. Clusterware can also manage the failover of direct mode applications. Also, you can define automated backup cycles and spare nodes that can be used if a node suffers some permanent failure. The Clusterware integration offers very rich functionality but also very fast failover (typically just a few seconds in my testing).
    Hope that helps clarify.
    Chris

  • How to manage Active directory and tools to manage Active Directory

    How to manage Active directory and which tools we use?

    You can use Microsoft Active Directory management tools:
    http://technet.microsoft.com/en-us/library/aa998508(EXCHG.65).aspx
    http://technet.microsoft.com/en-us/library/aa998508(EXCHG.65).aspx
    erview of Server Message Block signing
    http://support.microsoft.com/kb/887429/en-us
    Remote Server Administration Tools for Windows 7:
    http://www.microsoft.com/downloads/details.aspx?FamilyID=7d2f6ad7-656b-4313-a005-4e344e43997d&displaylang=en
    AD Admin Center:
    http://technet.microsoft.com/en-us/library/dd560651(WS.10).aspx
    http://technet.microsoft.com/en-us/library/dd560652(WS.10).aspx
    Santhosh Sivarajan | MCTS, MCSE (W2K3/W2K/NT4), MCSA (W2K3/W2K/MSG), CCNA, Network+ Houston, TX http://blogs.sivarajan.com/ http://publications.sivarajan.com/ This posting is provided "AS IS" with no warranties, and confers no rights.

  • Commitment Management

    Dear Experts,
    What is the relationship between PM orders and Commitment Management ? Is it possible to activate commitment management  for plant maintenance order types in the same way that we do for internal order dypes.
    We are already using PM order without commitment management . What are issues and consequences if we activate it now?
    Is there is any other  suggested SAP process for managing commitments against plant maintenance orders?

    Yes it is..
    Go to TCode OIOA (order types) and set the Open item management flag
    PeteA

  • Commitment management and fund management

    hi kings
    I am unable to understand the Commitment management and fund management.  What is actual role and function , objectives.  What is the importance and why we useing the commitment mangt and fund magt. 
    regards
    ram

    Hello
    As far as controlling is concerned, it is used to enter and analyze commitments at an early stage and control them in the module.
    Example Po's and PR lead to financial commitments and the costs would be incurred in future, so commitments are included in funds monitoring.
    For integration CO and MM need to integrated. The tasks created in MM are transferred to CO.
    You would have various activities in commitments.
    Funds commitments can be created in IO for orders, projects, cost centers etc
    As far as funds managements is concerned, you could create and execute budgets.You could budget revenues and expenditures for areas of responsibility.
    Funds management need to integrated with BCS(budget control system),GL,SD and MM and CO.
    Also, you could analyse the source and use of funds and monitor variance and means to check and control.
    Reg
    *assign points if useful

  • Free Goods with Batch Management Activated !!!

    Hi Gurus,
    I have defined a free goods master data for material on which batch is activated. I have defined the it as with a min of 10 qty 1 free good will be delivered as exclusive item
    Now as the batch management is active and each batch has 1 qty in it. Now in order to deliver 1 free good first i have to enter 10 line item of the same material and after the 11 th line system should generate 1 free good item. But this is not happening is there any standard configuration required for this process
    Early reply will be awarded accordingly.
    Thanks in advance
    Edited by: Abaper Abaper on Jul 10, 2008 12:31 PM
    Edited by: Abaper Abaper on Jul 10, 2008 12:32 PM

    Hi Abaper,
    Free Goods Determination follows the condition technique and hence you should have one condition type assigned to it one access sequence and then maintain the condition type (NA00) in a Free Goods Determination  Procedure (NA0000).
    Then assign this procedure to your permitted sales area and maintain the free goods determination master data (VBN1).
    Also Check the settings of Item Category Assignment
    It should be ORNORMFREE+TAN -
    > TANN.
    By this settings your free goods should work.
    Reward if it helps you
    Regards
    Harsh

  • Work Order & Cost Center Commitment Management

    We have a business requirement to be able to view our work order commitments (Reqs and POs) from the work order as well as from the cost center assigned to the work order via a settlement rule. Our business users do not like the work order collecting all of the costs instead of the cost center where they perform their cost controlling.
    The actuals will settle to the cost center eventually but without the commitments they have no way of planning for future costs. Commitments management is activated for both the cost centers and work orders involved. I am open to any suggestions on how to achive this requirement. Thanks!

    Any thoughts?

  • Stock ageing report with batch Management active

    Hi Experts,
    My client wants a Stock ageing report and batch management is active
    According to my client, Inventory ageing report should show stock quantities and stock value as follows,
    1. Below one year
    2. Between one and two years
    3. Above two years
    What are the table and fields to be considered for this report.
    Thanks
    NDS

    What steps do you mean? taking an ABAP course and doing it yourself, or stepping to an ABAPer and let him know what he shall do?
    you asked for a stock report, not for a movement report.
    If I go into my warehouse and looking at all the stuff sitting there and want a report that should tell me how old this stuff is, then i am not intrested if there was a goods receipt movement.
    However I would like to know the last movement date. In this case you have to look into table S032 or into the movements MSEG (with MKPF as header table)

  • After Funds Management activation we got error in travel managment

    Hi All,
      After activating funds management in the system, while creating a travel request we got the following error. Anyone can help on this, for idenifying the problem.
    In the travel request portal we are getting this error :
    " com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException:      No expense type for estimated costs has been defined. Cannot save   , error key: RFC_ERROR_SYSTEM_FAILURE     and          No expense type for estimated costs has been defined. Cannot save   , error key: RFC_ERROR_SYSTEM_FAILURE "
    regards,
    Sabari Prabhu.

    Hi
    I have a question, I udnerstand in (Create one expense type "Estimated Costs") but my question is in using transaction
    When you start using the trip transaction and select a travel request the system send you to the TP04 transaction... now
    with this new function, I have to use the transaction PR05 its right? becouse the TP04 ask the VORS expense type, and sap says to dont delete record
    Please could you tell me with wich transaction you start to create a travel request? I have the same problem of the screen but Im not sure to use the TP04 transaction wit this solution
    Thanks a lot

Maybe you are looking for