Communication b/w projects having multiple views

Hi all
I've a scenario. In that i want to call a specific view, in an application having multiple view , from a different application in a different project. Is it possible?
If so can anybody tell me how its done?
Thanks & Regards
Aparnna

Hi,
Yes it is possible, following link may be helpful to you.
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/f3b0ad90-0201-0010-4995-9bdb1849eb34
Thanks
wd regard's
Dheerendra Shukla

Similar Messages

Does anyone have experience with having multiple editors work on the same project from different computers?

Does anyone have experience with having multiple editors work on the same project from different computers?

As much as I hate to admit it, YOU ARE RIGHT!
I will tread lightly on this project.
Thanks for the sanity check,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Pros & Cons of having multiple web applications under one EAR project

Could anybody let me know what are the advantages and disadvantages of having multiple web applications under one single EAR project?

Either this is homework, in which case, do it yourself, or you already think you have some pros for doing this. Share with us

MVC �Best Practice� (handling multiple views per action/event)

Looking for the best approach for handling multiple views for one action/event class? Background: I have a small application using a basic MVC model, one controller servlet, multiple event classes, and multiple JSP views. For performance reasons, the controller Servlet is loaded once, and each event class is an instance within it. Each event has an �eventProcess()� and an �eventForward()� method called by the controller, standard stuff.
However, because event classes should not use instance variables, how should I communicate which view to forward to should based upon eventProcess() logic (e.g. if error, error.jsp, if success, success.sjp)? Currently, there is only one view mapped per event, and I'm having to put error handling logic in the JSP, which goes against the JSP being for just view only.
My though was 1) A session object/variable that the eventProcess() sets, and the eventForward() reads, or 2) Have eventProcess() return a mapping key and have the conroller lookup a view page based upon that key, as opposed to 1-1 event/view mapping.
Would like your thoughts!
Thanks
bRi

Your solution seems ok to me, but maybe the Struts framework from Apache
that implements MVC for JSP is a better solution for you:
http://jakarta.apache.org/struts/index.html
You should take a look at it. It has in addition some useful taglibs that makes life much easier.
We have successfully used it in a project with about 50 pages.

Multiple views without instancing

Ive seen the question asked about this. and it doesnt seem to
be widely used. using multiple cameras diplaying multiple views of
one scene, at one time, without having to use instances. why so
many opt not to use it I dont know. when it should be used. on a
very standard basis. for those that play the playstion or xbox
systems. you have most likely seen a game where a second window
opens up. You can do the the exact same thing in shockwave 3d. so
why not use it. Say you have a character walking thru a house. and
the camera is following that character. You can take a seperate
camera, in a seperate part of the house. Showing another person
coming from behind the first person in a second window displaying
both windows at the same time. You can actually create mood and
atmosphere. There isnt a single shot in movies or tv that cant be
created in 3d and therefore shockwave 3d, be it split screens or
not. So why not use it. This is like if all the people that use
flash opt not to use flash video. when that is one of its strongest
features. well here is a very simple example of it
www.bleed3d.com/rotating%20cameras.htm

quote:
Originally posted by:
tyree_2
Im not referring to resources Im referring to visual delivery
here is a very simple scene nothing special just a sphere but its
interesting to look at
But resources, in terms of manpower and funding is a huge
factor which
directly affects the end quality of the visuals. This is a
lot of the reason that most commercial games require huge teams and
huge amounts of funding. If we had double the time available (i.e.
funding) and double the team size for our projects, we would be
able to deliver much higher visual quality in terms of time spent
modelling characters and levels, and time spent adjusting and
improving visual routines.
Incidentally, the demo you posted is actually quite boring to
look at! Adding a second camera view of something that is already
very dull doesn't make it significantly more interesting :-)
quote:
I also dont believe that the size of the plugin is really a
problem. keep in mind people downloading movies and content in
excess of 100 mb is the norm.
If you read my post more carefully, you'll see that I said
the plugin install "process", not the size. I agree with you that
the size is not so much of an issue particularly now broadband is
more widespread. But the number of dialogue boxes that must be
click through, the 'age request', the toolbar option, the redirect
to shockwave.com.... it's appalling and I am embarrassed when a
client needs to see that, when we pitch a shockwave game to them.
It's a
major hinderance to selling shockwave work to clients.
I
really don't understand how you think adding a second camera
view would inherently raise the 'standard' or make a project more
entertaining. In almost all cases, unless it was for some specific
purpose that was relevant to the project, I think the user would
think, "what's that extra camera view for?".
- Ben

I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router....any ideas?

I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router, and used msconfig to bring up each service individually to see if there is an effect.Flash and iTunes have been re-installed ...any ideas?

I agree. I don't rely on iCloud as a backup, that is what I have my portable hard drive for. Its 500 GB so I can hold my entire iTunes library several times over on it. I have all my movies on my hard drive, but somehow "The Mist" got deleted off of my hard drive, so I figured "Well, the option to redownload an already purchased movie is available through iCloud, I'll just do that!"
And permissions and download availability have nothing to do with it, the movie's still there, it still allows me to redownload it. The only problem is when I click download, I get that message.
And nobody else uses my computer, but I do have multiple accounts authorized on it. Even still though, I am attepmpting to download it through the account I purchased it under. :/

IDVD burning one project on multiple macs? where are project contents?

How do I burn one project on multiple macs? I have a idvd project I created in keynote, added music to it in Garageband, exported to quicktime, and now is in iDVD burning just fine. However I have tons of these dvd's to make, I would like to put all my mac's to work.
last night i tried to share the file, and it is just an alias when i drag it over from the macbook it was created on to my imac. the file says it is in use and locked, since the macbook that created it is burning it. If I wanted to brun on the imac, I had to wait until the macbook was done.
is there a way around this? What if I copied all files I used to make the idvd project to my imac or any computer i wanted to burn on? woudl it hen allow two macs to be burning the same project?
I figured I could do this just like on my PC, drag the file over and voila...no such luck, its like if i had dragged a shortcut over to another pc...if the first one is using the file, its locked. Basically how do i get to the actual contents of the project, so I can also bring them over and hopefully it will allow me to burn on multiple macs at the same time?
my next solution if that didn't work was to start copying dvd's using popcorn on the other macs while the macbook continues burning through idvd.
Any opinions on how i can duplicate a dvd fast...need alot of copies!

Also as to where the files are.
I-DVD project bundle: This is the file created when you save the project.
• [user]/Library/iDVD/Favorites: This folder is located in your home folder.
• [root]/Library/iDVD/Favorites: This folder is located at the root of your disk.
• /Network/Library/iDVD/Favorites: This folder is on a network system specifically
configured by your system administrator for this purpose. (This is not the same as
having a server networked into your computer.)

Having multiple problems with script - NTFS Permissions and AD Groups

Hi, all! I'm having multiple problems with my first script I've written with Powershell. The script below does the following:
1. Prompts the user for a corporate division under which a shared folder will be created, and adjusts variables accordingly.
2. Prompts if the folder will be a global folder or an office/location-specific folder, and makes appropriate adjustments to variables.
3. If a global folder, prompts for the name. If an office/location-specific folder, prompts for each component of the street address, city and state and an optional modifier. I've prompted for this information in this way because the information
is used differently later on in the script.
4. Verifies the entered information and requests confirmation to proceed.
5. Creates the folder.
6. Creates an AD OU and/or security group(s).
7. Applies appropriate security groups to the new folder and removes undesired permissions.
Import-Module ActiveDirectory
$Division = ""
$DivAbbr = ""
$OU = ""
$OUDrive = "AD:\"
$FolderName = ""
$OUName = ""
$GroupName = ""
$OURoot = "ou=DFS Restructure Testing OU,ou=Pennsylvania Camp Hill 4410 Industrial Park Rd,ou=Locations,ou=Camp Hill,dc=jacobsonco,DC=com"
$FSRoot = "E:\"
$FolderPath = ""
$DefaultFolders = "Archive","Customer Service","Equipment","Inbounds","Management","Outbounds","Processes","Projects","Quality","Reports","Returns","Safety","Schedules","Time Keeping","Training"
[bool]$Location = 0
do {
$userInput = Read-Host "Enter CLS Division: (W)arehousing, (S)taffing, or (P)ackaging"
Switch ($userInput)
W {$Division = "Warehousing"; $DivAbbr = "WHSE"; $OU = "ou=Warehousing,"; break}
S {"Staffing is not yet implemented."; break}
P {"Packaging is not yet implemented."; break}
default {"Invalid choice. Please re-enter."; break}
while ($DivAbbr -eq "")
write-host ""
write-host ($Division + " was selected.")
$FolderPath = $Division + "\"
write-host ""
$choice = ""
do {
$choice = Read-Host "Will this be a (G)lobal folder or (L)ocation folder?"
Switch ($choice)
G {$Location = $false; break}
L {$Location = $true; $FolderPath = $FolderPath + "Locations\"; $OU = "ou=Locations," + $OU; break}
default {"Invalid choice. Please re-enter."; $choice = ""; break}
while ($choice -eq "")
write-host ""
write-host ("Location is set to: " + $Location)
write-host ""
if ($Location -eq $false) {
$FolderName = Read-Host "Please enter folder name:"
$GroupName = $DivAbbr + " " + $FolderName
} else {
$input = Read-Host "Please enter two-letter state abbreviation:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter city:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter street address number only:"
$FolderName = $FolderName + $input
$GroupName = $DivAbbr + " " + $FolderName
$FolderName = $FolderName + " "
$input = Read-Host "Please enter street name:"
$FolderName = $FolderName + $input
$input = Read-Host "Please enter any optional information to appear in folder name:"
if ($input -ne "") {
$FolderName = $FolderName + " " + $input
$OUName = $FolderName
write-host
write-host "Path for folder: "$FSRoot$FolderPath$FolderName
write-host "AD Path: "$OUDrive$OU$OURoot
write-host "New OU Name: "$OUName
write-host -NoNewLine "New Security Group names: "$GroupName
if ($Location -eq $true) { write-host " and "$GroupName" MGMT" }
write-host
$input = Read-Host "Please confirm creation of new site/folder: (Y/N) "
if ($input -ne "Y") { Exit }
write-host
write-host -NoNewLine "Folder exists: "; Test-Path ($FSRoot + $FolderPath + $FolderName)
if (Test-Path ($FSRoot + $FolderPath + $FolderName)) {
Write-Host "Folder already exists! Skipping folder creation..."
} else {
write-host "Folder does not exist. Creating..."
new-item -path ($FSRoot + $FolderPath) -name $FolderName -itemtype directory
Set-Location ($FSRoot + $FolderPath + $FolderName)
if ($Location -eq $true) {
$tempOUName = "ou=" + $OUName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "OU exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "OU already exists! Skipping OU creation..."
} else {
write-host "OU does not exist. Creating..."
New-ADOrganizationalUnit -Name $OUName -Path ($OU + $OURoot) -ProtectedFromAccidentalDeletion $false
$GroupNameMGMT = $GroupName + " MGMT"
if (!(Test-Path ($OUDrive + "CN=" + $GroupName + "," + $tempOUName + $OU + $OURoot))) { write-host "Normal user group does not exist. Creating..."; New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
if (!(Test-Path ($OUDrive + "CN=" + $GroupNameMGMT + "," + $tempOUName + $OU + $OURoot))) { write-host "Management user group does not exist. Creating..."; New-ADGroup -Name $GroupNameMGMT -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
# $FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
write-host $BIUsersSID.Value
# out-string -inputObject $BIUsers
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$objUser = New-Object System.Security.Principal.NTAccount($ADGroupName)
$objUser.Translate([System.Security.Principal.SecurityIdentifier]).Value
write-host $ADGroupName
write-host $objUser.Value
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
$ADGroupName = "JACOBSON\" + $GroupNameMGMT
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
} else {
$tempOUName = "cn=" + $GroupName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "Group exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "Security group already exists! Skipping new security group creation..."
} else {
write-host "Security group does not exist. Creating..."
New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ($OU + $OURoot)
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$FolderACL.SetAccessRuleProtection($True,$True)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"Modify","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
My problems right now are in the assignment/removal of security groups on the newly-created folder, and the problems are two-fold. Yes, I am running this script as an Administrator.
First, I am unable to remove the BUILTIN\Users group from the folder when this is an office/location-specific folder. I've tried to remove the group in several different ways, and none are having any effect. Oddly, if I type in the lines directly
into Powershell, they work as expected. I've tried the following methods:
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
In the first case, the script goes through and has no apparent effect because afterwards, I do a get-acl and the BUILTIN\Users group is still there, although when looking through the GUI, inheritance appears to have been broken from the parent folder.
In the second case, I get the following error message:
Exception calling "RemoveAccessRuleAll" with "1" argument(s): "Some or all identity references could not be translated."
At C:\Users\tesdallb\Documents\FileServerBuild.ps1:110 char:5
+ $FolderACL.RemoveAccessRuleAll($Ar)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : IdentityNotMappedException
This seems strange that the local server is unable to translate the SID of a BUILTIN account. I've also tried explicitly putting in the BUILTIN\Users SID in place of the variable in the New-Object line, but that gives me the same error. I've
also tried the solutions given in this thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ad59dc58-1360-4652-ae09-2cd4273cbd4f/remove-acl-issue?forum=winserverpowershell and at this URL:
http://technet.microsoft.com/en-us/library/ff730951.aspx but these solutions also failed to have any effect.
My second problem is when I try to apply the newly-created security groups, I also will get the "Some or all identity references could not be translated." I thought I had found a workaround to the problem by adding the -PassThru option to
the New-ADGroup commands, because it would output the SID of the group after creation, however a few lines later, the server is unable to translate the account to apply the security groups to the folder.
My first Powershell script has been working well up to this point and now I seem to have hit a showstopper. Any help is appreciated.
Thanks!

I was hoping to stay with strictly Powershell, but unless I can find a Powershell solution, I may resort to ICACLS.
As for the problems with my groups not being translatable right after creating them, I think I have solved this problem by using the -Server parameter on all my New-ADGroup commands and this example code seems to have gotten around the translation problem,
again utilizing the -Server parameter on the Get-ADGroup command:
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
# Add the new normal users group to the folder with Read and Execute permissions
$GroupSID = Get-ADGroup -Identity $GroupName -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
# Add the management users group to the folder with Modify permissions
$GroupMGMTSID = Get-ADGroup -Identity $GroupNameMGMT -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupMGMTSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
Going this route seems to ensure that the Domain Controller I'm creating my groups on is the same one that I'm querying for the group's SID to use in the FileSystemAccessRule. It's been working fairly consistently.
Still having issues with the translation of the BUILTIN\Users group, though.

HT203433 Hi! I am so stumped with having multiple apple ID accounts now when I try to do an update on my iPhoto app it tells me to log into the account I used to purchase that app. I have tried going into my other accounts. Please help.

Hi! I am so stumped with having multiple Apple ID accounts. I did this not knowing what I was doing and now I can not update my iPhoto app because it tells me to log into the account that I used to purchase it. I thought I was trying to do this but I can't get anywhere.
Please help!
Flora

Hi Florafromco,
You can view your iTunes Store account and request assistance by following the instructions below:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/ht2727
I hope this information helps ....
The following article will provide a little more information regarding using multiple Apple ID's:
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
I hope this information helps ....
Have a great day!
Have a great day!
- Judy

Can no longer see projects in library viewer in imovie '08 and need to find a different apple editing program

Can no longer see projects in library viewer in imovie ’08 and need to find a different apple editing program
I had approximately 15 projects that I can no longer see in imovie. I have read almost every thread on this community for imovie regarding error messages associated with looking for clips. In each case I have rebuilt the project. However, today I continually received a message to search for a .dv file. I have located the file and even changed the .dv file to .mov file and yet none of my projects will appear. I have rebooted, deleted the plist and nothing works.
I was planning on buying a new Mac in 2014 with new editing, and use my old Mac as a backup for imovie files. Very frustrated that I can’t work with any projects now! I se the files in my Movies/imovies/iprojects folder but they don’t appear in the viewer.
Does anyone have a suggestion on how to get back my projects into the viewer? Or, can someone recommend a basic program compatible with imovie 08 that I can use to import my exiting projects into?

No, Wasn't sure if I could continue to upgrade to 9.0.9 since my Mac is relatively old.
Just don't understand why I have to keep starting a project over and over again. As I type this, the imovie icon is jumping and asking for "clip 135-02-05-05;27:15" cannot be found. Without this file, the movie cannot play properly." I have located this clip and pointed imovie to the clip, and nothing happens. I even try to locate the corresponding clip in the event viewer but it is not there.
Today is the first time I have not been able to see my projects in the viewer.

Table based on multiple views

Hello all,
Is it possible to populate a table with data from multiple view objects that are linked with a view link?
The reason i want to do this is because if you update the reference ID in the master the detail automatically follows.
Now, I know i can create a view object and then include the detail info using expert mode, but this way the detail info doesn't change if i change the reference ID.
To conclude, a brief explanation of what i'm trying to achieve.
I have a table with adresses. Having a reference ID to the ZIP table.
Because the user doesn't know all the ID's by heart i show the name of the city and the user can change them by clicking on a lov button. This all works fine, BUT, when the city is changed the old one stays visible for the user. Although committing, changes the city to the new one.
Regard
Johan

Keeping in mind what Dave just said, you would be better off creating your GTT once. Then reusing it over and over again. Using GTTs is advantagous in that its contents are visible only at the session level, and depending on how the GTT was created it will either automatically truncate the table on commit (the default if not otherwise specfied) or truncate the table at the end of your session regardless of commits.

How to handle stored procedure response having multiple queries

Hi Friends,
While working in JDBC to RFC scenario,I faced an issue that my stored procedure is having multiple SQL queries in it. First Select and then update and again some select options.So,how to handle the response of the stored procedure. I read that while using sender JDBC
" db.processDBSQLStatement=<SQL-Select-Statement>
Either specify a valid SQL SELECT statement to select the data to be sent from the specified database, or specify an SQL EXECUTE statement to execute a stored procedure that contains exactly one SELECT statement "
So, please suggest me is there any other way to catch the output of the stored procedure.Because, if select statement is working fine but if any other quires fails then data inconsistencies can happen.Kindly help me out.
Thanks and Regards,
Nutan

Hi nutan,
>>Already exception is handled in SP.But,issue is that select will never fail so, sender adapter will get the resultset from select and continue process.But if later any other query fails in SP adpter wont be getting any response.
Along with exception you need to handle the case when some other query fails. A SP is like a procedure which will do a certain list of activities before providing the output. So during this activity if some query fail then you can send back the response with a message!!!! And in XI handle this error (by routing it to some error receiver etc)
>>I need to try something like creating a temporary table and inserting the resultset of slect statement in that. and perform all other operations and after successful completion of all the queries.Again i want to get all the values from the temporary table. So,whether I can write such query in the sender communication channel.Please suggest me for this.
Approach looks ok, but think of the delay for JDBC sender adapter. IT will invoke your SP and will wait for it to fill a table and do all the processing. I guess this may become a issue for you.
Check on the frequency of this interface and message size before taking this design approach
Regards
Suraj

Since upgrading to iphoto 11 I,m having difficulty viewing my photos in edit mode. On the quick scan of info mode the photos appear sharp, however in edit mode the edges blur up making it very difficult to edit properly, What is the problem here? I never

Since upgrading to iphoto 11 I,m having difficulty viewing my photos in edit mode. On the quick scan of info mode the photos appear sharp, however in edit mode the edges blur up making it very difficult to edit properly, What is the problem here? I never

Marisa, you stand a better chance of getting an answer concerning iPhoto by posting this question in the iPhoto forum
https://discussions.apple.com/community/ilife/iphoto

What are the main advantages of having multiple WLS_FORMS instance servers?

Hi,
I know it's possible to deploy multiple instance weblogic forms servers (WLS_FORMS). What are the advantages of having multiple instance of forms server?
When we deploy forms&reports 11g the configuration process creates WLS_FORMS and WLS_REPORTS. Is there any advantage of having under the same physical server more than one WLS_FORMS server?
Regards
Ricardo

The exact advantages and disadvantages will depend on exactly how you configure your environment. Remember that everything good comes with a price. So for example, you can add additional managed servers to improve scalability, but doing this means consuming more system resources. So although you may now be able to service twice as many users, it may have cost you 1gig of RAM or more (just an example).
I would recommend taking a look at the documentation as it offers a pretty good high level view of the possible configurations and their advantages. Here is a good starting place:
http://download.oracle.com/docs/cd/E14571_01/web.1111/e13716/understand_domains.htm
The complete documentation set for FMw 11.1.1.3 and WLS 10.3.3 can be found here:
http://download.oracle.com/docs/cd/E14571_01/index.htm

'BBPSC11' error in Monitor SC for one User having multiple positions but on

Hello,
'BBPSC11' error in Monitor SC for one User - having multiple positions in org structure - but having one BP code associated to all positions.
We have one BP ID associated to multiple positions of the same user - in multiple org structure.
The org unit is refered as one Project and like wise we have multiple projects people worked on.
Once the Proj is over we move the Users from one Proj (Org unit) to another Proj, with new Position created copying the old and associate old BP code to it.
With this when we go for Monitor SC option - enter User ID in Created By field - old SC are listed but we are getting error if we click on the Detail icon.
Error:The Internet Transaction Server could not start the transaction "BBPSC11" because of the following error: Attribute for user contains errors. Inform systemadmin. .
AD

Hi,
Pl. verify the user with txn-bbp_attr_check. It could be that the org. relationship of the user changed with what was captured on shopping cart. Also use txn-users_gen to repair the user.
Regards,
Sanjeev

Communication b/w projects having multiple views

Similar Messages

Maybe you are looking for