Communication between Lab view and Controller via USB

USB communication between C8051F320 and Lab View. I try doing methods given in the NI site(http://zone.ni.com/devzone/cda/tut/p/id/4478) and atlast, it gives me error −1073807302 so if any one can answer my question please do post me the details concerned to it.

My devices show up as NI-VISA USB but I'm not sure if that makes a difference and I'm not using USB RAW either. One thing that you can run is a VISA Property node like below and see what it reports. Also, what version of VISA are you using? If you are not using 4.0, you can download it from http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C0E91?opendocument&node=1....
Message Edited by Dennis Knutson on 01-31-2007 07:29 AM
Attachments:
USB RAW Property.PNG ‏3 KB

Similar Messages

  • Is there a difference between AirPrint and printing via usb printer plugged into an airport extreme?

    My printer does not show up in the add a printer option on my iMac when plugged into the extreme. I have a HP officejet 5610 All-in-One. I want to be able to print wirelessly using my Airport Extreme.  Thank you

    Is there a difference between AirPrint and printing via usb printer plugged into an AirPort Exreme?
    Big difference. 
    AirPrint for one will not work via USB, so you will not be able to print from an iOS device like an iPhone or iPad using this type of connection unless you look at additional software....that may or may not allow this option.
    Assuming that you get the All-in-One setup using the USB port on the AirPort.......only printing is supported.
    You will not be able to use any other advanced features like maintenance, scan, copy, fax, etc when the device is connected to the USB port on an AirPort.
    If you plan to use the HP for other things, I would strongly recommend that you connect it to your computer.
    My printer does not show up in the add a printer option on my iMac when plugged into the extreme.
    This usually indicates that your printer model is not supported. Check with HP Support to see if they have any updated Macintosh drivers for the 5610 that you could download and install that might allow this.
    HP Officejet 5610 All-in-One Printer Drivers - Hewlett Packard

  • Communication between HP eprint and Google Cloud Print

    Hi,
    the communication between HP eprint and Google Cloud Print seems to be broken. At least for me.
    The documents do get printed when I print vio Chrome browser or Cloud Print dashboard -- but the status in cloud print remains as "submitted". It seems like somehow the HP eprint status doen't get reported back to cloud print. In HP eprintcenter the log says "printed".
    Well, I wonder who will take care of this problem ...  (Hope it will not result in fingerpointing only ...)
    Thanks for your support!
    Best,
    George
    This question was solved.
    View Solution.

    Are you able to log back in later and the status at Google Cloud print update to reflect the true outcome of the print job? Or does it just remain as "submitted". Otherwise, if it is printing and showing in the log at ePrint Center (EPC) as printed, the issue would not be on the ePrint side but on Google's
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • UFT 11.53 - toggle between keyword view and editor not working

    Hello,
      I have installed the enterprise version of UFT 11.53.  I have patched it with Patch # 3 (00082) and Patch # 4 (00106) in order to get Chome v 37 support.  Now when I try to toggle between keyword View and editor, it is not working.  The editor is fine.  The Keyword just set frozen and will not allow me to do anything other than, change it back to the editor
    see when I click the toggle button...its frozen...see the toggle button is down.
    It's so annoying.  I'm going to have to uninstall it again.
    Please help, if you know what's going on

    Hello sfarren,
    The forum you want is the HP Enterprise Business Community.
    Right now you are in the consumer products forum.
    I am guessing this link is the area you will want to ask your question at.
    http://h30499.www3.hp.com/t5/Unified-Functional-Testing/bd-p/sws-Fun_TEST_SF
    Good luck and hope it helps.
    PS: You might have to register again to post on that forum.

  • I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

    I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

    Reset the SMC, as per > Resetting the System Management Controller (SMC)
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    Then zap the PRAM/NVRAM as per > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.
    Then retry the Disc Drive.

  • Control a micro-controller via usb

    Hi,
    I'm looking for a way to control a micro-controller via usb using a java program. The micro-controller is used as an on/off switch. Is there a micro-controller that has a java driver provided?
    thanks

    The environment for Arduino is programmed in Java ( http://www.arduino.cc/en/Main/Software ) and you can use Java serial comms to communicate with it ( http://www.csc.kth.se/utbildning/kth/kurser/DH2400/interak06/6-Comm.html ).
    Mine hasn't arrived yet, but I'm planning to play with one.
    Pete

  • What is the diffrence between SAP View and CAD View ?

    What is the diffrence between SAP View and CAD View ?
    What is the main purpose of SAP View
    and
    What is the main purpose of CAD View
    On SAP help i found
    SAP View is used for :The SAP view displays the SAP structure (document-based structure) for the active CAD object, or another document info record (header document), with a single-level or multilevel document structure in a tree structure. You can variably configure the fields using the layout editor.
    CAD View is used for :The CAD view displays the document-based structure of the currently active CAD object, such as the structure of an assembly. The CAD system determines the complete (multilevel) structure and copies it either completely or in stages to the SAP system, in accordance with the default explosion level.
    BUT I did not understand it well
    Can someone explain this with an example
    THanks
    Raj

    Hello Raj,
    SAP View  can be further described as the view that is based on what is existing already in the SAP system. This view is generally used by SAP purchasing, MM people etc
    CAD view is nothing but the replication of the model tree view in the SAP system. This is used by the design engineer and this view replicates only the parts that are actively displayed on the CAD tool window.
    hope this helps. Let me know if you have further questions else please close the message.
    regards
    N K

  • Communication between a driver and application.

    Communication between a driver and application.
    I am writing a driver for a PCI card. I have found very good examples of how the driver should be build.
    Where do I find the information about how the user mode application should be talking the driver.
    So If you have any idea that will help me, please let me know.

    Hi,Sir
    This for your reference.
    It will create pci adapter device node at /devices .
    You can use AP function call ioctl to Communicate with your device driver.
    static int
    xxattach(dev_info_t *dip, ddi_attach_cmd_t cmd)
    int instance = ddi_get_instance(dip);
    switch (cmd) {
    case DDI_ATTACH:
    allocate a state structure and initialize it.
    map the device�s registers.
    add the device driver�s interrupt handler(s).
    initialize any mutexes and condition variables.
    create power manageable components.
    * Create the device�s minor node. Note that the node_type
    * argument is set to DDI_NT_TAPE.
    if (ddi_create_minor_node(dip, "minor_name", S_IFCHR,
    instance, DDI_NT_TAPE, 0) == DDI_FAILURE) {
    free resources allocated so far.
    /* Remove any previously allocated minor nodes */
    ddi_remove_minor_node(dip, NULL);
    return (DDI_FAILURE);
    * Create driver properties like "Size." Use "Size"
    * instead of "size" to ensure the property works
    * for large bytecounts.
    xsp->Size = size of device in bytes;
    maj_number = ddi_driver_major(dip);
    if (ddi_prop_update_int64(makedevice(maj_number, instance),
    dip, "Size", xsp->Size) != DDI_PROP_SUCCESS) {
    cmn_err(CE_CONT, "%s: cannot create Size property\n",
    ddi_get_name(dip));
    free resources allocated so far
    return (DDI_FAILURE);

  • Communication between the computer and the disc drive failed

    The disc can’t be burned because because communication between the computer and the disc drive failed (error code 0x80020022). This computer has been out of the box for less than a month and this has been a growing problem.

    My problem was FIXED at the apple store..... there was something wrong in the system preferences and the genius deleted something that recreated it's self. Surely enough we we're able to burn a 600 mb dmg of nothing onto a few test disks. For anyone having this issue...it's NOT The media, it's some configuration issue within the computer's preferences. I'm telling you all to take your machine to the nearest apple store and have them fix it, if your machine is still under warranty the fix is free. There was no hardware issue, so the optical drive was not replaced.

  • Communication between non SAP and SAP

    HI,
    do you have some information about communication between non SAP and ERP (WebAs) SAP System ?
    I would like to receive an xml file or xml IDoc from a Java Plattform (non SAP) into our SAP ERP System as an own defined IDoc.
    remember: we don´t have a converter like XI.
    What about using a proxy (do you have some information/blog how to use that) ?
    What about using a webservice (do you have some information/blog how to use that) ?
    What about storing the xml on the application server (do you have some information/blog how to use that) ?
    How to transform xml to IDoc ?
    other methods ?
    Thanks for your help.
    Gordon

    Here is a link to connecting MS SQL Server with SAP using Open Hub connection.
    http://msdn.microsoft.com/en-us/library/dd299430(SQL.100).aspx
    This might give you some insight into connecting with Non SAP Systems.
    I have used the information from this link to export data from SAP to MS SQL Server.
    Good Luck.
    MP.

  • Can i back up one G5 via firewire and another via USB to the same drive

    I have an ibook and a G5., I have a 500 gb lacie external drive.
    Can i back up both via time machine simultaneously, one via firewire and one via USB?

    Ross Dehovitz1 wrote:
    I have an ibook and a G5., I have a 500 gb lacie external drive.
    Can i back up both via time machine simultaneously, one via firewire and one via USB?
    No, you can not directly attach one drive to two computers at the same time, period. In particular, you can't use it for Time machine this way.

  • Error 2032 in communication between Flex Client and WCF

    Hi All,
    I'm trying to establish communication between Flex Client
    and WCF service.
    WCF service accepts gZip compressed data and returns gZip
    compressed results.
    So I used Flex ByteArray.compress() and
    ByteArray.uncompress() for this purpose. However, it throws error
    2032.
    The gZip compression/decompression uses MemoryStream class in
    C#. Based on my previous experience, memory stream communication
    between Flex and C# gives erro 2032.
    Is there a work around for this?
    Thanks,
    Vishal

    I read some thread in the forum, and found somebody had the similar problem with me. Just want to know how to settle this problem.
    In the client/server program. Client is a JAVA program and Server a
    VC++ program. The connection works, and the problem appears after some time. The Client sends a lots of requests to Serverm, the server seems receive nothing. But at the same time, the server is able to send messages to Client. The Client also can get the messages and handle them. Don't understand why there this problem and why it appears when it wants.
    The client is a Win2k platorm with JDK1.3.1 and the server is also a Win2K platform with VC++ 6.0.
    In the Client, using:
    inputFromServer = new BufferedReader(new InputStreamReader(socket.getInputStream()));
    outputToServer = new PrintWriter(new BufferedWriter(new OutputStreamWriter(socket.getOutputStream())),true);
    Hope can get your help.

  • Add a simple switch to PDF Reader to change between MY-VIEW and ORIGINAL-VIEW

    I would like to open pdf file with my same default viewing preference *every single time* that I open a PDF file, regardless of what the original document creator set as the default view.  It would be nice to have a SIMPLE switch between MY-VIEW and ORIGINAL-VIEW.  It's very frustrating to have to keep switching my view preferences every time I open a new file with a different default.

    Thank you Bernd, but that is only part of the solution.  For example, I do set the Page Layout to 1-page-continuous.  MOST of the time it keeps this setting, but some documents either override that setting, or perhaps it reverts back to a default (maybe with version upgrades?).  The other part is that I always want the menu-bar and toolbar to show up.  Some documents hide these when they open.  I realize that I can hit [F8] and/or [F9] to toggle these, but there are additional settings.  I also want to always have the selection tools available, etc.  Bottom Line: I just want a collection of settings that I can call up with a single, simple shortcut or button, so I don't have to perform multiple steps just to get the tool back to my standard configuration whenever something changes it.

  • Completely new to lab view and need to get some stop watch help please

    OK I am new to lab view so please be patient with me. I have a need for a stop watch that is triggered to start when two voltage values differ by more than 0.110V and then stop counting when they return to within 0.110v my goal is to capture the total amount of time the two voltages differ and record it along with the rest of the data is this possible and how would I do it? Thanks I am running 8.5

    danger831 wrote:
    thanks for the quick response but thats not really enough info to help me as I am very very unfamiliar with lab view and have only been using it for a few days(mainly just plugging in copied sections) so hopefully someone can give me a little more help. But the good news is I am now looking into taking one of the Lab view courses but that probably won't help me with this problem this week. thanks again for your help
    For starters, try to write the name correctly. It is LabVIEW, not lab view.
    Seriously though, your best way of learning to is try some things yourself first. Look through the examples that ship with LabVIEW for the components Raven suggested (while loops, shift registers, etc.) We could give you a working example but you will learn far more by trying things for yourself. As suggested, try a few things and then post what you have done and what you are having trouble with. From there we can answer your questions rather than just do it for you.
    Mark Yedinak
    "Does anyone know where the love of God goes when the waves turn the minutes to hours?"
    Wreck of the Edmund Fitzgerald - Gordon Lightfoot

  • Why can I not access My iPhone on my Air - they have the same cloud account - same iTunes - logged onto the same wifi network... and connected via USB - difficult much?!its killing me ahhh my screen smashed and i want access to my iPhone on my macbook

    Why can I not access My iPhone on my Air - they have the same cloud account - same iTunes - logged onto the same wifi network... and connected via USB - difficult much?!its killing me ahhh my screen smashed and i want access to my iPhone on my macbook..
    why is it sooo hard still --- can anyone inform me on this miracle app please
    thank you
    sincerely
    Theigalaxy

    find my iphone is something one needs to activate on the phone itself using the same appelID is nowhere near enough
    if it is then one can track, play a sound and remote whipe it from
    www.icloud.com
    if your screen is smashed and you think you can use find my iphone to get any data from your phone you are sadly mistaken

Maybe you are looking for