Communication Channel types for e Filing GB

Hi radhika,
For e-Filing Outgoing process the configuration Scenario is PAYE_EOY_GB.
For e-Filing Incoming Process scenario is Employee_tax_code_update,
In these cases, GovernmentGateway is as sender for -Filing Incoming Process and is as receiver for e-Filing Outgoing process.
But at sender side what is the type of the communication channel weather File or SOAP or ?
At the receiver side what is the type of communication channel used in XI content template?
What type of system GovernmentGateway is?
Regards
Sreeni

Hi
The communication channel is http,
Check this link, which has all the documents related to e-filing
https://websmp109.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000081749&
especially this document shows creation of comm. channels also
XI Guide for setting up DPS
Regards
Vishnu

Similar Messages

Custom Adapter - No content in Communication channel Monitoring for JCA

HI,
     We have developed a Custom Adapter for our client in XI with name JCA and it is working absolutely fine.
     Issue: We are not getting any entries in Communication Channel Monitoring for success or Error Messages.
     We have used Audit log for success or Failure entries and they are coming fine in Messaging System but there coule be a standard way to get entries in Channel Monitoring.
    Our client needs the entries in CC monitoring instead of Customised Audit Logs.
    Please help.
REgards,
Anurag Garg

HI Satish,
                 Thanks for answer. I am looking for this in Custom Adpater not in adapter module.
                 This log creates a trace File . Its not to do with getting messages in CC monitoring as we do get for File Adapter or other Adapters.
               Like- Message Successfully put into the queue.
                     - Successfully processed.
                 Such Messages are there in sample_ra. jar file code but they are not visible in CC Monitoring.
               I think some extra code needs to be added to activate this in Monitoring.
               Please suggest.
REgards,
Anurag Garg

Communication channel parameters for XI receiver adapter

Hi
I am implementing a ABAP server proxy - to do this, I am creating a XI adapter type - Receiver communication channel so that messages from XI go to ---> the R3 system wherein the proxy is implemented.
I have seen a weblog with a sample defn of communication channel of this adapter type , but the illustration there is not clear enough.
Based on documentation for this in help.sap.com, I have the following questions :
1. Do we have to setup a HTTP type destination in the XI box pointing to the R3 system ( on which ABAP proxy is implemented ) . I guess this is the case, since XI needs to find the connection to the R3 box to pass the proxy message to it .
2. If we do have to setup a HTTP type destination in XI pointing to R3, what is the path prefix and service number field values that need to be given...
I tried putting in /sap/xi/engine as path prefix and 8000 as service with the logon credentials for the R3 system and I get a status code error of 500 ( Pipeline specified in URL attribute not existing ) when I test the SM59 connection in XI...
Any pointers on what am I missing here ??

Hi Karthik,
>>1. Do we have to setup a HTTP type destination in the XI box pointing to the R3 system ( on which ABAP proxy is implemented ) . I guess this is the case, since XI needs to find the connection to the R3 box to pass the proxy message to it .
Based on 'addressing type' field in XI adapter you can either specify HTTP destination in communication channel or provide all the required details in the communication channel itself.
>>2. If we do have to setup a HTTP type destination in XI pointing to R3, what is the path prefix and service number field values that need to be given...
I tried putting in /sap/xi/engine as path prefix and 8000 as service with the logon credentials for the R3 system and I get a status code error of 500 ( Pipeline specified in URL attribute not existing ) when I test the SM59 connection in XI...
use the URL /sap/xi/engine?type=receiver
Also make sure that your R/3 is set up as a local integration engine for proxy communication..
Check this..
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
Regards
Anand

Communication channels path For testing ?

For testing communication channels one path is there what is that path ?
There all adapters are there based on our adapter type we can click that adaper and check weather our communication channel is correct or not? i need that path.

Hi,
Yep, You can test & see all the Adapters those are up and running in the following path
1) goto Integration Builder by opening http://hostname:port/rep
2) Click on Runtime workbench
3) Click on Component monitoring
4) Click on Display
5) Click on Adapter Engine
6) Click on Communication channel monitoring
Here you are able to see all the Communication channels .......and you can check the error or success messages also....
Regards
Seshagiri

XI Communication Channel setting for MQ Cluster

Hi all,
I am looking for information related to communication channel settings to access a MQ cluster using JMS adapter. Please provide any helpfull links.
I want to know if this would be any different when XI interfaces with a MQ without clustering.
Thanks!

I don't know which cluster mechanism you have, but if you have 2 hostname you should think to a method to switch from a node to the other in easy way, deactivating one and activating the other (for instance with the <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/45/0c86aab4d14dece10000000a11466f/frameset.htm">Controlling a Communication Channel Externally</a>)
I suggest you to verify how it will be in production instance: real cluster ? switch over ? virtual IP ?
Regards,
Sandro

How many Communication Channels required for File--Bpm(SAP R/3)--File

Hi
 Pl..help me on this
 I am doing the following scenario File 2BPM 2 File
 i.e File -
BPM(ASync)
 BPM -
SAP R/3(Sync)
 SAP R/3 ---BPM (Sync)
 BPM ---File (Async)
 For me it looks three CC's but still i am not confident
 Can any one explain me on this
Adv thanx
Prasad K

File(CommChannel 1 -File Sender) -
> BPM(ASync)
BPM -
> SAP R/3(Sync) (CommChannel 2 - RFC Receiver)
SAP R/3(Comm Channel 3 -RFC Sender) --- > BPM (Sync)
BPM ---> File (Async)(CommChannel 4 - File Receiver)
So a TOTAL of 4 Comm Channels.
Since Sinchronous so 4 channels .. if you use idoc adapter instead of RFC 3 channels will do
Cheers,
Himadri
null

Time out at communication channel type SOAP and RFC(synchronous interface)

Hello Experts.
I have a some interfaces here that have a Sender SOAP channel and Receiver RFC channe. We have problens with Timeout with soap channel and expiration with RFC time channel. I need a way to keep de connection alive in these interfaces, someome can indicate a way to do it?
Thanks a lot.

The error that ocurred is that one:
SOAP: error occured: com.sap.aii.af.ra.ms.api.RecoverableException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.MessageExpiredException: Message 4f451ed1-db17-11e0-ab5d-00001e05f032(INBOUND) expired: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.MessageExpiredException: Message 4f451ed1-db17-11e0-ab5d-00001e05f032(INBOUND) expired
The RFC inbouc channel expired.
Thanks.

Communication channel Availability

Hi All,
I am having a File to File scenario wherein there is no mapping involved.You can say as good as using a FTP.I am using XI in this scenario purely because of client requirement.
Problem Statement :
I need to pick up the source file from a particular folder and send it to target folder at a paticular time say 8:00 am daily.
Steps taken:
To take in this requirement, I have configured the Sender communication channel (Type File) availability to 8:00am - 8:15am daily.This was done by going to RWB>CC Monitoring>Control data(Automatic)
 Settings :
 Details Tab:
 1)Description: Just any characters here
 2)Active: Checked
 3)Availability Time - Daily
 At (Time):8.00 For (Duration): 15 Minutes
 Series Start: Start Date Series End: End Date
 Availability Times From : -same as above-
 Communication channel Tab:
 Communication Channel:<Sender Communication channel Name>
All above config is saved.
Problem encountered:
Now when I do the above steps, XI does take not only the file from source for 8-8:15 duration but also outside it. So file which comes in source folder after 8:15 am say at 9:00 is also picked up by XI, which ideally should not be the case.
My Query :
Am I going wrong somewhere while configuring the availability of Comm channel?
Regards,
Shiben

Hi Shiben,
Could you please check the Control Data state of Communication channel, it should be Automatically (not Manually)
● Manual
You control the communication channel by choosing Start or Stop.
● Automatic
The communication channel is controlled by availability times.
● External
The communication channel is controlled by an HTTP request.
http://help.sap.com/saphelp_nw04/helpdata/en/44/2a1a8620323f0ee10000000a114a6b/content.htm
Cheers,
Jag
Edited by: jag on May 7, 2008 5:41 PM

How To Configure XI Receiver Communication Channel ?

Hi Expert,
I have a Scenario wherein i have 2 XI systems & i need to pass the messages between these 2 XI / PI system using XI Adapter. Can any body tell me how to configure the XI Adapter Step by Step. Is it required to Create the SM59 RFC destination with type H. Pl. Explain me in detailed.
Regards
Umesh

Hi Umesh,
In creating XI receover communication channel, you have 2 options for Addressing Type:
1. URL Address - no need to create RFC destination. You just have to specify the XI receiver host name, HTTP port, path (/sap/xi/engine?type=receiver), Authentication data (logon details for SAP Client number of the PI system).
2. HTTP Destination - create RFC destination in SXMB_ADM and specify the RFC destination name in your receiver communication channel.
For SAP documentation, see this link: http://help.sap.com/saphelp_nwpi711/helpdata/en/e1/091640a991c742e10000000a1550b0/frameset.htm
Hope this helps.
Regards,
Jenny

Configuration Wizard in ID is not using existing Communication Channel

Hi,
I am using PI 7.1.
I created a Communication channel FileSenderCC for a Business System Sys_Sample_One_D with Party as blank.
After creating i can see below object in the list of communication channels in the left pane.
|Sys_Sample_One_D|FileSenderCC
After this when i use Menu: Tools -> Configuration Wizard -> Internal Communication, to configure the scenrio, I selected the Business System Sys_Sample_One_D and Adapter Type "File", and proceed, while selecting the sender communicaiton channel, it cannot find the FileSenderCC that i created.
If i manually enter FileSenderCC, and complete the scenario, it is creating a new communication channel with the samename, and not using the exisitng one.
After that i see two communication channels in the left pane.
|Sys_Sample_One_D|FileSenderCC
*|Sys_Sample_One_D|FileSenderCC
does this happen in PI 7.1 only, because when i worked in 7.0 long time back, i dont think i got this issue.

Hi,
I had the same issue on PI 7.1, it looks like a bug, but I found no note about it.
I think you should open an OSS message for this.
Kind Regards,
Sergio

Using a variable in communication channel

Hi,
I have a lot of Communication Channels looking for files in the same directory. This directory's path will be changed soon and so I assume I'll have to change all my Communication Channels.
I was wondering whether there was a means of using a variable for the Source Directory in order to just have to change its value where it is defined and not every where it is used...
Regards
Yann

Hi,
Is this a sender file adapter? or a receiver file adapter?
You can make a change / make the receiver file adapter's directory dynamic by setting the value during runtime in the mapping.
Use this blog and the code in the blog to acheive this,
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Sender File adapter, I dont think this is possible.
Regards,
Bhavesh

Need help in troubleshooting communication channel using soap adapter

Hello friends
I have a simple scenario.
I have created 2 communication channels, one for searching a record and another for updating it with a new value
Both uses SOAP as sender and RFC as receiver with a Standard BAPI.
Everything was working ok, but without any changes, all of a suddent I am not being able to update the values and when I checked RWB, I see for Update SOAP Adapter Channel, the messages say
Request received for a channel
but in a second it says 'Call Failed'.
I haven't made any changes.
I even tried restarting XI and ERP servers but still getting the same error.
Any suggestions or feedback will be greatly appreciated.
Thanks
Ram

THE PROBLEM WAS WITH A JOB GETTING HUNG IN THE QUEUE AND I HAD TO FORCIBLY KILL THAT. THAT TOOK CARE OF THE PROBLEM

AS2 Reciver Communication Channel error

Hi,
I am doing FILE to AS2 ...
I configured the Scenatio with Synchronous MDN , I have Created the Sender for MDN report too..
beow is my Error At AS2 reciver Communication Channel...
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DTREQUEST and DATABASE.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DTREQUEST and DATABASE..
Thanks

Hi Tom,
This problem comes in SAP PI 7.1 version for resolving you require creation of extra configuration objects u2013
1. A sender AS2 communication channel with protocol as u201Ereports‟
2. A sender agreement using above communication channel.
For more information please refer Article (This will help you in configuring extra objects)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d095b2df-9fa3-2d10-568b-d12d99828c33?quicklink=index&overridelayout=true
Regards,
Vikrant

JMS communication channel

Hi,
We got an error in the JMS comunication channel.
After we got this error, we restarted the java stack. But then the
JMS communication channels did not resume the connectivity automatically.
We had to manually start and stop the channels. Even we tried making it 'Automatic' in the communication channel monitoring tab. But didnt help
Do we have to maintain any other settings?
Please help to rectify this.
Thanks,
John

Hi,
Just create two communication channels one for receiever and other sender message will be received from sender CC and then after mapping will go thru Receiver CC
While configuring the channel remeber to put the details like the channel name and queue from which you need to pick up the message and put the message as in yr case both are different
try to configure like this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5059f110-0d01-0010-7c8b-fdc983be70c0
In addition to the below blogs also refer this
Async/Sync Communication using JMS adapter without BPM (SP 19)
Sync/Async communication in JMS adapter without BPM (SP19)
Exploring JMS and SAP-XI JMS Adaper
Check if you have your adapter module configured as said in the following help doc
http://help.sap.com/saphelp_nw70/helpdata/en/4d/a3bc97ff55c742af7faed661635baf/content.htm
Check these on Adapter module dev:
http://help.sap.com/saphelp_nw04s/helpdata/en/96/f04142099eb76be10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/32/43d84072378031e10000000a1550b0/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e21106cc-0c01-0010-db95-dbfc0ffd83b3
Check these Links ---
==>http://help.sap.com/saphelp_nw04s/helpdata/en/a3/63af1bbf09469fa1615c05f0daff6f/frameset.htm
==>http://help.sap.com/saphelp_nw04s/helpdata/en/a3/63af1bbf09469fa1615c05f0daff6f/frameset.htm
Hope These links will be Very Helpful to you...:)
Regards,
Suryanarayana

Communication Channel Template not used/found?

Hi,
I've created a new integration scenario. Below "adapter metadata" I've created a communication channel template for IDOC. Now if I try to configure my integration scenario I can't find/access/use that predefined communication channel template. I only can choose between the existing communication channel belonging to the business system already used. Why can't I use that communication channel template?
Thanks and regards!

Hi Christian,
check this:
http://help.sap.com/saphelp_nw04/helpdata/en/65/b11c409ce22402e10000000a1550b0/frameset.htm
Look for:
Creating a Communication Channel with a Communication Channel Template
Regards
Stefan

Communication Channel types for e Filing GB

Similar Messages

Maybe you are looking for