Company Code field now shown in Cost Center Master Data

Hi
I am new, I configured CCA. Created Controlling area and versions. When I created a cost center company code field not shown. I think one cost center assined to a one company code but in cost center master data Company code field not shown. I want to cost center company code specific. I using ECC6
Pl help.

Hi,
When you will assign additional company codes, the cost centre created now, by default will be assigned to the existing company code, and for the new one - you will have to define cost centres again. So, everything is fine, do not worry.
Regards,
Eli

Similar Messages

  • How to Make the Name 1 field in cost center master data as compulsory

    Hi,
    We have requirement from the client to make the Name 1 field in the adress tab of the cost center master data as a compulsory field when the cost center master data is accessed through KS01, KS02 T code.
    There is also existing cost center master data in SAP system for which NAME 1 field is blank. How the issue of the existing master data can be dealt if there are no data NAME 1 field in the existing cost center master data.
    regards
    Partha B

    Hi
    This path refers to exit COOMKS01.... (For Cost Center Enhancement using Custom fields)
    For the above requirement, I belive COOMKS02 is the right one.... (Custom checks before saving)
    Br, Ajay M

  • Field Status for cost center master data!

    Hi friends,
    can anyone please tell me,
    Where do we define, which field is mandatory in cost center master data
    regards

    Good afternoon Rohan,
    To do that :
    IMG or transaction KM1V.
    Create a variante with attributes.
    You can also define time based fields in transaction OKEG
    Valérie
    Message was edited by: valerie secondy

  • Person Resposible in Cost Center Master Data

    Hi,
    I need a help in identifying about the field "Person Responsible" in Cost center master data.
    Is this field corresponds to Manager of the cost center, if so, what is the information we have to give there, it should be Manager's PERNR or Manager's user name or manager's full name ..????
    Thanks and Regards,
    Girimurugan

    Hi Giri,
    I see that this is your first post on SDN and would like to welcome you here.
    I suppose you have accidentally made two identical posts. You have got some responses in the other thread. If they have satisfied you, then close that thread by marking it as answered.
    Regards,
    Anand Mandalika.
    P.S : Please read the following two documents -
    1. https://www.sdn.sap.com/sdn/index.sdn?page=crp_help.htm
    2. /people/mark.finnern/blog/2004/08/10/spread-the-love

  • Company code field in cost center master data

    I am trying to create some cost centers, but noticed that the company code field is not available for entry in the cost center master data. In other words, the company code field does not appear or is hidden. My understanding is that an entry in company code field in cost center master data is mandatory. Can someone advice as to what setting is missing?

    Hi MG,
    Appearance of the field "Company Code" in cost center master data depends on the following point...
    In Controlling Area settings in OKKP, if you have opted for single company code, then, whatever the cost center you create under this controlling area is obviously belongs to that company code only. So, system will not display the filed "Company Code" in cost center master data.
    If you have opted for cross-company code controlling in OKKP settings, then, when you create a cost center in that controlling area, then the system will give the field "Company Code" in cost center master data so that in which company code you need to create the cost center.
    I hope u got it...
    Srikanth Munnaluri

  • Company code feild in cost center master data urgent plzzzzzzzzzzzzzzz

    hi
    iam not able to find company code feild in cost center master data. how to make it appear

    Hi Santosh,
    Please check whether How many company codes are assigned to your controlling Area.
    If it is more than one, then the Company code field will come at the time of creation of Cost Center.
    If it is only one company code assigned to Controling Area then the Company Code filed will not be visable.
    Best Regards
    Kamma

  • Change Tax Jurisdiction code (TXJCD) in Cost Center Master Data

    Hi There,
    We have a problem of making change to Tax Jurisdiction Code in Cost Center Master Data. We are on ECC 6.0 with Vertex system as external tax system. When we create Cost center, system automatically derive tax jurisdiction code from vertex) external system).  Now Vertex have made changes to Tax Jurisdiction Code for same place based on US Gov directive. these changes are time period base say from 01/01/2008 to 06/30/2009 Tax Jurisdiction Code  "TX1000" and from 07/01/2009 to 12/31/999 Tax Jurisdiction Code  "TX2000" (example)  When we go to change mode in Cost Center, system automatically derive the new Tax Jurisdiction Code  and update the cost center with new Tax Jurisdiction Code  "TX2000". When we book invoice for cost center, with back date say 06/29/2009, system through the error, that it is not a valid Tax Jurisdiction Code.
    My question is; how can we maintain two different Tax Jurisdiction Code  in SAP for Cost Center? From configuration stand point of view, we have maintained TXJCD as time dependent field, but still this field is grayed out and sytem populate the Tax Jurisdiction Code  from external system, since we have installed vertex system for tax purpose.
    Please let me know.
    Thanks,
    Pawan Sharma

    Pawan,
    have you received any response on this or identified any solutions as I have also a similar request.
    Thanks,

  • How to make the Deprtmnt field in the cost center master data as required ?

    Dear Experts,
    I want to make the Department field in the cost center master data as required field.....how do i do it?
    regards
    Suresh

    Hi Eli,
    Thanks for the quick reply
    while creating the Cost center itself the field should come as required field........can that be met with this enhancement?. Because the transaction code being used int the enhancement is for change mode but i want this feature in  create mode itself.
    thanks
    regards
    Suresh

  • Co code not seen for cost center master data creation in OKEON

    hI:
               In org tab of Cost center master data creation while configuring cost center hierarchy in OKEON i can not see organization tab. I have checked in OKKP Co area is assigned to co code but still the issue persist.
    Br

    hi
    you mean the tab is not displayed? strange, it seems that there should be a screen layout to control the ui, or any transaction variant is recorded. I tried in my side, the tab is there.
    @ Murali, you are right, but in that tab, not only company code can be configured, but also business area, functional area etc.
    best regards, Lawrence

  • Cost Center Master data field status change

    Hello Gurus,
    I need to change the field status of 'User Responsible' field as required from optional in the cost center master data. I am not being able to get the exact answer from my searches. If anyone can help with an answer, it would be great.

    Dear,
    You can use screen variant also...
    Transaction code: SHD0
    and make that field as required.

  • Lsmw Uploading cost center master data fields ERFNM,ERFDT at History tab

    Hi Gurus,
    I done uploading of cost center master data through LSMW.everything is fine but I have one issue.
    I done Uploading from 4.6 now in 4.6 the cost center was created by some one else when I am doing in ECC 6.0 system automatically taking my name as default it means I can not enter in ECC 6.o that who originally created  it  and what was that date. Is there any way to solve it or system will take only mine name in Fields( ERFNM,ERFDT )at cost center History Data while creating Master data.
    Many Many Thanks

    Yes, system will take the creator name from the person who actually creates the cost center in SAP.
    It will be filled automatically and you can not change the creator name.
    This is to ensure better audit trail and tracability.
    Regards,
    Gaurav

  • Segment field is not shown in profit center master data

    Hi,
      When i activated New GL ,but the segment field is not shown in profit center master data. How can i make the field shown ?
    Thanks.

    After activating the New GL have you defined the segment? First define the segment under Enterprise Structure and in Fin.Acctg Global settings(New)-Legers-Display scenarios for General Ledger Accounting, you need to create new entries for FIN_PCA & FIN_SEG.
    Hope this helps you.

  • How to make the Profit Center Field Mandatory in Cost center Master Data

    Dear All,
    Please let me know how to make the Profit Center Field mandatory in Cost Center Master Data as well as my Internal Order Master Data?
    Thanks in advance!
    Regards,
    Rajeswari Shankar.

    Hi Rajeswari,
    You can modify message number KS096 to "Error" via OBA5. Thus, the users would no be able to save a cost center without entering a profit center. (Depending on your release you can make KS096 modifiable by implementing note 486781.) 
    Concerning the internal orders (transaction KO01), you can run KOT2 and set Profit center field as required entry in "change field selection" section.
    Regards,
    Greta

  • "Region" field in Cost center master data needed as mandatory

    Hello Gurus,
    I would like to ask you where exactly in SPRO we can customize the field "Region" in Address tab in Cost center creation as a mandatory? so far its only optional
    is this possible?
    thanks in advance for your help.
    Hana

    Hey Hana,
    According to [this thread|Re: KS01 , Field status Cost center master data;, you will need a user exit to accomplish that.

  • Remove Mandatory field in Cost center master data

    Dear All,
      I want to remove the mandatory person responsible in the cost center master data. How to do this
    Regards
    Vasantha

    hi Vasantha,
    as far as I know, this is not possible. If a field is mandatory or not in cost center master data is determined by the system.
    hope this helps
    ec

Maybe you are looking for