Comparing the Tax procedures of Europe and Asia

Hi
There is a requirement for me to compare and produce an analysis report on the Tax procedures followed by Europe and Asian Countries.
As i have not worked much in this area,i have no clues as of where to start from. Out of my own study i have gathered the following info :-
a) A tax procedure would be defined for every country :- But here we have so many condition types ( more than 20 for each country) and moreover they differ from each other.
In the above case how should we begin the analysis. Should we have to compare condition type by condition type ?
If so then it would consume a lot of time. Please advise.
b) I feel that once this procedure is defined, almost three-fourths of the job is done.
The rest remains to assign a country and define the GL accounts for thr relevant ActKeys mentioned in the respective procedures.
But i wish to know the analysis part of the Tax procedure. Also how can i know that a particular country is following a specific Tax procedure. Is there any place where i can check this out ?
Thanks in advance

Hi llona,
we are having the same situation that our Company Code is having its offices in almost all the countries. So we have created Tax Codes with reporting countries in the same way you told that first character for type of tax and second character for reporting country. Deductible/non-deductible is maintained in the description itself. As per my knowledge it is the better way.
bye
Mallik

Similar Messages

Will a flash movie affect how searchable my website is in Europe and Asia?

I have a legal website - http://www.hilfandhilf.com. I practice immigration law, and I want to incorporate foreign language videos to build my clientele in Europe and Asia. I want to make sure what I incorporate is compatible worldwide, and does not get relegated to a page where no one will view the videos I plan to create. Any suggestions?

In that case shall we conclude that Nokia Lumia 521 will not be able to use 3G speed in India?
frank1126 wrote:
I would like to use my US Nokia Lumia 521 unlocked by Tmobile when travelling in Asia and Europe. In each country we visit I wil buy a local prepaid SIM. Hopefully I could use the phone for voice and 3D data, and tether my notebook. The Lumia 521 specs are:
WCDMA network: 850 MHz, 1900 MHz, 1700 - 2100 MHz
WCDMA max data speed DL: HSDPA - 21.1 Mbps
WCDMA max data speed UL: HSUPA - 5.76 Mbps
GSM network: 850 MHz, 900 MHz, 1800 MHz, 1900 MHz
GSM max data speed DL: EGPRS 236.8 kbps
GSM max data speed UL: EGPRS 236.8 kbps
Am I correct in assuming I will not have any problems with the voice portion? Looking at the frequency bands, will 3D be possible or only EGPRS or something else?
As far as I can tell all the wireless carriers in Europe and Asia use Lumia 520 with what looks to me like different data frequency bands: WCDMA network: 850 MHz, 900 MHz, 1900 MHz, 2100 MHz
Your kind help is appreciated.

What is the correct procedure to connect and collect events from IPS through SDEE

What is the correct procedure to connect and collect events from IPS through SDEE?
We are a 3rd party application, that needs to collect and analyze the IPS events for a client.
Currently the approach we are following is
1) get a SubscriptionId using the URL below
https://IP_Of_IPS/cgi-bin/sdee-server?action=open&events=evIdsAlert&force=yes
This gets us a subscriptionId which is used in step 2
2) Collect events from the url below
https://IP_Of_IPS/cgi-bin/sdee-server?confirm=yes&action=get&subscriptionId=sub-sample&startTime=1362699903575432000
a few more notes here are
- starttime is current time in nanoseconds
the peculiar problem here is that, even though we specify todays date, SDEE returns us the events from mid Feb (today is march 7)
we did try a few combinations, but are out of ideas.
any help or direction would be appreciated

This is more an application issue than an IPS issue.
Have you compared your app against other apps [IME]?

Client from 800 to 000 client to activate the TAX Procedures..

Hi Guru's,
In my practice server i am not able to get the tax procedures TAXINN and TAXINJ for this i went to institute they said that copying from 000 client to 800 client..then we can get in 800 client also.. but here is the problem how to do it..
Please friends if any one know's please reply me...
Thanks & Regards
Sunil gupta.

Hi Sunil,
Please go through the link given below.
SAP Library - BC ? Client Copy and Transport (BC-CTS-CCO)
Hope this will help you.
Regards
Eugene

How is the tax procedure determined on a transaction?

Hi !
We are using a bolt-on for US tax transactions and internal functionality for VAT.
Now, the US entity needs to sell from an EU plant under an EU VAT ID.
We crated and assigned a new pricing procedure in SD to pick up MWST conditions and created appropriate condition records to assign EU tax codes.
In SD, all goes well; the appropraite tax codes are assigned, rates used in calculations etc.
However, when we release to accounting. We get an error that "Tax Code XX is not assigned to Tax Procedure TAXUSX."
It was my understanding that the country of the shipping plant was the country that drives the Tax Procedure selection, so I would have expected the system to find the appropriate EU tax procedure etc. Why is the system finding the Tax Procedure for the United States?
Help!

Hi,
    In SD the country of the shipping plant is used for the tax procedure.
    In FI the country of the company code is used for the tax procedure.
    In cases where the countries are different ,you have to maintain the same tax code in both relevant procedures.
   SD only transfers the tax code to accounting (not code + procedure) , so accounting looks for that tax code in TAXUSX.
Kind regards

Comparing the ROI of Content Marketing and Native Advertising

Sharing an interesting article on the topic here: https://hbr.org/2015/07/comparing-the-roi-of-content-marketing-and-native-advertising?utm_source=twi...
This topic first appeared in the Spiceworks Community

Sharing an interesting article on the topic here: https://hbr.org/2015/07/comparing-the-roi-of-content-marketing-and-native-advertising?utm_source=twi...
This topic first appeared in the Spiceworks Community

How to copy Value of fright from pricing procedure to the tax procedure

Dear All,
Please note, I have a condition type in Pricing procedure i.e. ZRCO-this is for fright which will be added by the user in the PO.
I want to copy the same value to ZRC1 which is a condition type in tax procedure.
Kindly advise, is there any way we can do this automaticaly. My requirement is to add the fright to the gross price while caluclating the VAT in tax procedure.
Rgds,
Raghavendra N N

Hi,
There is a Field for Manual entries in configutration for Conditions : Condition Types.
Manual Entries Indicator which controls the priority within a condition type between a condition entered manually and a condition automatically determined by the system.
Make the following entries according to your requirements:
_: No limitations
A: Freely definable
B: The automatic entry has priority. If a condition record exists, the condition cannot be entered manually.
C: The manual entry has priority. When you enter the condition manually, the system does not check whether a condition record exists.
D: Cannot be processed manually
Hope this will help.

HT1212 hi, I can´t restore/Unblock (by wrong pass code) my Ipod tch following the explained procedure, any easy and quick procedure to unblock? I appreciate

I forgot the password and now my Ipod touch is blocked, trying to follow the procedure from the apple page the software update dos not end. Any quick and easy procedure to reset and unblock the ipod? I appreciate your help

What does " software update dos not end" mean?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

What is the proper procedure dor uninstalling and reinstalling CS5 extended?

I downloaded some trial plugins and then removed them and ever since, CS5 is not working well. Sometimes when I open it and go to file open to open an image, everything is grayed out and I have to close down and re-launch. When I open an image and want to look at the file info, everything freezes and I have to use task manager to close down photoshop. As well, my bridge is not working correctly. I want to uninstall and then reinstall, but I thought that somewhere that I read there are specific ways to do that or else the program thinks you're trying to load it on another computer..? Thanks for any help and dircetions/instructions that you can give me.
CAnn12

As a test, and perhaps an alternative to Uninstallin and Reinstalling PS CS 5, if you are on a PC, check to see if you have a System Restore Point, prior to the installation of those trials. If you do, then first - create a new System Restore Point for today, and then boot to Safe Mode. There, you should be presented with the option to Restore the System. Navigate to that System Restore Point, prior to the trails, and choose it. The system will then ask to be rebooted, after a few moments. Do so, and then test PS. Does that fix things?
On a Mac, I think that the equivilent of System Restore is something like Time Machine, but do not know if that is part of the Mac OS, or an add-on product.
Good luck,
Hunt

I'm from the US, travelling in Europe, and I'm getting "no service"

I'm travelling in Europe, had my iPhone 4s enabled for international calling, landed and I can't get service for voice. Verizon told me i need a "sim" in the slot ..is this true?

Hi there vanekji!
I hope your travels in Europe are going well thus far. Now, I want to make it even better by getting your phone up and running again. The iPhone 4S does require the activation of a global SIM card for it to work abroad. Here's how you can determine if you have a SIM installed http://vz.to/15b7xNX . If so and you're looking to grab some coverage, please don't hesitate to reach out to our global support team at 908-559-4899. Additionally, utilize this tool for extra help during your travels http://bit.ly/xZd3pS .
EvanO_VZW
VZW Support
Follow Us On Twitter @VZWSupport

Compare the values of multiple columns and take the column header

Hi all,
I have a table as follows:
acct-d1-d2-d3-d4-d5
101-1/2/2009- - - 3/2/2009-12/12/2009
102- - 10/10/2009- -12/25/2009-
acct is a number where as d,d2,d3,d4,d5 are date columns.
I need to write a query where i need to pick the maximum date for an acct.
for acct - 101 12/12/2009 should be picked up and for acct 102 12/25/2009.
output should be :
acct-dt
101-12/12/2009
102-12/25/2009
Thanks..

Hi,
Starting in Oracle 11, you can use the UNPIVOT feature:
WITH     unpivoted     AS
     SELECT     acct
     ,     column_name
     ,     ROW_NUMBER () OVER ( PARTITION BY acct
                               ORDER BY        dt     DESC
                             ) AS r_num
     FROM     mytab
     UNPIVOT     (     dt     FOR column_name IN ( d1
                                     , d2
                                 , d3
                                 , d4
                                 , d5
SELECT     acct
,     column_name
FROM     unpivoted
WHERE     r_num     = 1
;

Tax structure in europe

Hi,
How the tax procedure in europe for moving the goods within europe and for the movement fo goods from europe to outside europe countries.
Can any ne kindly eloborate in detail.
Thank you.

Hi,
For moving the goods from out of europe there is no tax procedure will be applied, But for importer tax wil be applied.
Thank you
Sap MM

Are tax procedures TAXIN and TAXINN same?

Guys, in OBYZ transaction I don't find TAXINN, I find only TAXIN. Are these one and the same? If not, how do I activate TAXINN in the system?
Regards,

Hi,
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique. The standard system comes with two tax calculation procedures:
- TAXINN - IN; India taxes new
- TAXINJ - Sales Tax India
TAXINN:
1. It is Condition Based Tax procedure.
2. Tax Code is required to be maintained in Condition Record, & if Tax Code is not found in Condition Record, Sales Cycle will go upto billing, but not release to accounting. Hence even a single Tax code may suffice the requirement for different Tax rate.
3. Tax condition record is maintain through TCode FV11.
4. It only supports condition-based excise determination.
TAXINJ:
1. It is Formula Based Tax procedure.
2. It was most commonly used upto initial phase of R/3 4.7, but the latter implementations were with TAXINN.
3. Tax Code plays a vital role, as the Tax Rate are maintained in Tax Code in TCode FTXP..
4. It is complex compared to TAXINN
5. It can supports both condition-based excise determination and formula-based excise determination.
6. For Example, code for 362 routine for Condition formula for alternative calculation type
Activation steps are same as above:
>Go to transaction code OBCO to define the tax procedure TAXINN and TAXINJ.
>Then assign country to tax procedure in transaction code OBBG
Regards,
Jyoti

Relation between Tax procedure and Pricing procedure

Dear All,
I would like to get more clarity on Tax procedure, Pricing procedure.
a) Why do we have Tax procedure and assigned to Country?
b) If the tax procedure has been created and assigned to Country-IN (in FI module), then why do we need to create pricing procedure with same condition type for purchasing in MM module? We are even creating lot of pricing procedure for Sales in SD module.
Regards
Manivannan R

Hi
Tax
During SD document transactions, tax calculation procedure TAXUSX is only relevant to determine the tax liability accounts for output sales tax. Notice that in pricing procedure RVAXUS, the condition types XR1 - XR6 carry the tax rates and tax amounts - resulted from the external tax system calculation - which is posted to tax G/L accounts. However, the tax accounts are not specified in the pricing procedure but rather in the tax calculation procedure.
Tax codes are the link between pricing procedure and tax calculation procedure.
Pricing
The primary job of a pricing procedure is to define a group of condition types in a particular sequence. The pricing procedure also determines:
Which sub-totals appear during pricing
To what extent pricing can be processed manually
Which method the system uses to calculate percentage discounts and surcharges
Which requirements for a particular condition type must be fulfilled before the system takes the condition into account
Example
Example of a Pricing Procedure
If a sales department processes sales orders for a variety of foreign customers, the department can group the customers by country or region. A pricing procedure can then be defined for each group of customers. Each procedure can include condition types that determine, for example, country-specific taxes. In sales order processing, you can specify pricing procedures for specific customers and for sales document types. The system automatically determines which procedure to use.
Pricing Procedures in the R/3 System
The standard system contains pre-defined pricing procedures, which contain frequently used condition types along with their corresponding access sequences. You can, of course, modify these procedures or create your own from scratch.
Creating and Maintaining Pricing Procedures
You create or maintain pricing procedures in Customizing for Sales. For more information on creating pricing procedures, see the online Implementation Guide for Sales and Distribution.
To reach the pricing procedure screen from SD Customizing:
1. Choose Basic Functions
2. ® Pricing ® Pricing control ® Define and assign pricing procedures.Select the transaction that you want to execute.

Can SAP tax procedure be set up for both internal and external ?

Hi all,
Hoping to get some help from you here.
Our current SAP system is set up with internal tax procedure, and we are planning to use Vertex as the external tax system. However, due to phase approach, we are planning to launch Vertex for part of the company codes and the rest of the company codes will stay with internal tax procedure. Is this possible?
Thanks in advance for all your help!
Best,
Cyanna

Hi,
The tax procedure ia activated at country level. So this can cont be setup company code wise.
Regards,
SDNer

Comparing the Tax procedures of Europe and Asia

Similar Messages

Maybe you are looking for