Comparison Reports in ECCS?

Hi,
   I am planning to work on real time ECCS report. My main Motto is to compare
Company code group account balances(Dimension 01) to Profit Center group account balances(Dimension 03).
Can anyone suggest(any idea)  how to work on this. I am new to ECCS.
A detailed explaination is well appriciated.
Thank you
Harsh

Hi Binho,
You can open unmanaged reports directly off your hard drive using the load method.
And for more info and samples to get you going click on this [link|https://boc.sdn.sap.com/developer/library]:
Thank you
Don

Similar Messages

  • Error while RRI from BW reports to ECC CJI3 transaction

    Hi All,
    When we try to set up RRI from BW reports to ECC CJI3 transaction, we get an error message (Stop message):
    You cannot use the report-report interface to call up report RKREP000
    Diagnosis
    Line Item report RKPEP000 is not suitable for the report/report interface
    Procedure
    Always enter RKPEP000 as the receiver report for project line items in the report/report interface. This program uses the transfer parameters to determine which line item reports can be accessed.
    <b>As per the other reply tried the ABAP Report RKPEP000/3 also ..no use ..
    can you please suggest , how to go about this CJI3 issue for RRI , what settings need to be done in the RSBBS ...</b>
    We have attemped to use "S_ALR_87013543" as well but the parameters don't go through properly which means when a user jumps from a BW report, they end up at the ECC selection screen of S_ALR_87013543.
    Drill through is working for our Cost Center reports. Just not this one in particular.
    Any advice would be greatly appreciated.
    prasad

    Hi,
    I'm facing the same problem so please If you have found some solution please tell me what should I do to use RRI from BEX query to CJI3 transaction.
    Regards,
    Ana

  • Data Quality Comparison Report across Systems(MDM and BW)

    Hi,
    I have a requirement of generating a Data comparison report in Excel using BODS. I need to extract data from SAP MDM and SAP BW and do a comparison on the record basis. For example.I take a material 100 record from MDM and same Material 100 record  from SAP BW. I  have to compare field by field values between these 2 systems.If there is any contingency,I have provide that record as output in Excel.
    I think i need to create a batch  job in BODS to run this requirement. Could you please tell  me the approach of comparing the records in BODS and give the output of the record in Excel.
    I really appreciate your help.
    Thanks,
    Kumar.

    Hi,
    The steps are :
    To read data from BW need to create a open hub detination based on the datatarget where the data is stored.
    Read the MDM data to BODS and then in BODS.
    Once both the data from BW and MDM are sotred in BODS then create a pioneer report which is based on excel.

  • Error running comparison report

    In a Demo instance for release 12.1.2 I run the extract for Profiles selection set, then on the same instance, changed some of the profile values and re-run the same extract. When I run the comparison report using both extract files I get the following error message:
    Entity Name: Profile Options
    Ignore Warnings and Continue: No
    Update Existing Records: Yes
    Time Taken(seconds): 89.0
    java.sql.SQLException: ORA-20001: The following PL/SQL exception:
    -1422: ORA-01422: exact fetch returns more than requested number of rows
    occurred in procedure az_comp_reporter.compare
    on this statement:
    procedure end
    ORA-06512: at "APPS.AZ_COMP_REPORTER", line 755
    ORA-06512: at "APPS.AZ_COMP_REPORTER", line 180
    Any help how to troubleshoot this?
    Thanks

    Hi:
    Please check for the report preferences for the key attributes marked for comparison. Also, please log a SR for tracking this issue with development.
    Thanks,
    Lokesh

  • Integration crystal report with ecc

    hi experts
    i am not similar to crystal report,i wanna know if we can develop the crystal report in ECC directly,i find some forums all about bi,crystal report just can integrate with BI?
    also i need some detail documents ,please help me,thanx all
    best regards
    zlf

    Do not cross post.
    Read the "Rules of Engagement"
    Regards
    Juan

  • Sending Comparison Report from OEM Grid

    Hi All
    I have configured a job to compare a schema objects in two database. I used Grid Control's Change Manager for this. I want an email
    to be sent me when ever a comparison job completes and this email should
    contain the comparison report of the comparison. I need a report same as we use
    to have in change manager which comes with Oracle Administration Client and
    generates and HTML report of schema comparison. Can you please help me setting
    this. I have already setup configuration of my mail server and email adderess
    in my OEM Grid control.
    Thanks

    What you first need to do is set up a notification method.
    Then you will need to set up your own notification schedule.
    Then add the job you are wanting to run and be alerted on to the notification rules.
    Then you will want to subscribe to that/those rules.
    Then you will want to check the notification you wish to get in the job itself.

  • OBIEE Date Comparison report with multiple measures

    Hello everyone...
    I have a requirement where I need to create a date comparison report (Current Month vs. Prior Month vs Prior Month Year Ago vs YTD vs Prior YTD vs Rolling 3 months, etc) with multiple Measures (Quote count, Quote offered count, New Business count, etc). I am to generate this report in this fashion:
    Quotes Current Month vs PM vs YoY Prior
    Month Current Month Prior Year Current
    YTD vs PM Prior
    YTD Rolling 3 Months vs PM Prior Rolling 3 Months
    Issued 120 120 123 1400 1020 1700 1580
    Unique Risks
    Offered 556 449 571 5881 6220 6101 5892
    Unique Risk Close Ratio
    Offered Close Ratio 21.6% 26.7% 21.5% 23.8% 16.4% 27.9% 26.8%
    Bitmap
    Avg Issued Premium 240 238 222 2801 2630 3104 2892
    Avg Offered Premium
    New Business
    Count
    Avg Full Term Premium
    I understand that time series is an option, and have created the time series (which show up as measures).
    My problem is:
    when creating the report (even as a pivot table) , OBIEE is not allowing me to drag the measure to rows, nor is it allowing me to drag the time series to columns. Also, I need to do conditional formating on some of the columns showing an up arrow for increased vs. prior month and down arrow for decreased vs. prior month.
    Does anyone have a solution for this issue? Any assistance would be greatly appreciated...
    Please advise and thanks!!!

    Jason,
        You've been very helpful, but I guess I'm just not explaining myself that well. The Credit Memo's throw things off because they do not contain a "Paid Date" value. That field in the record is blank. Since it is blank the report query ignores them. Therefore when the report query returns all records that have a "Paid date" range of "x to y" they are never returned. This is a problem whenever a credit memo exists for an invoice because the "invoice total" never changes. So when a customer pays on their account for a particular invoice, they only pay what is due which is the "invoice total" minus any "credit" from the "Credit Memo". So when my A/R person receives payment they are showing the invoice paid in full because MAS automatically includes all invoices and credit memo's. My report does not because there is no data in the "Paid Date" field of the record for Credit Memos.
    I've been doing alot research in trying to resolve this "exception" to my report. I think I may be on to something, but my knowledge of arrays is extremely limited. My resolution involves populating an array with the "invoice numbers" that are returned from the initial query from the supplied date range. Then using the "invoice numbers" from the array have it then populate my details section of the report with all of "invoice records" both the actual invoice record and any "credit memo" records. I can then group the records returned  based upon the "invoice number". then within that grouping I can performing my calculations to show whether or not the invoice has been paid in full. What do you think?  I've been able to populate an array with the invoice numbers based upon my date search range, but I have yet to figure out how to take that information and perform another lookup to pull in the rest of the data I need. Do you have any ideas?
    Thanks.  Bill

  • How to create crystal reports from ecc abap program?

    Hi all,
    I am new to sap ecc to bo report!!
    I heard that abap program cannot be directly connected to crystal reports,
    So created a function module which is equivalent to the abap program!!
    And happened to connect the same in crystal !!
    Can anyone let me know how to proceed !!
    will be there any performance issue ?
    can anyone guide me how to do reporting from ecc function module to crystal reports directly?
    Thanks

    Hi Pooja,
    From what I know, not all ABAP programs can be accessed in Crystal Reports. The program should return rows and columns, otherwise, CR would not be able to report off it.
    I'm not sure if there are any performance issues if we follow your path. Do you experience any?
    And, do you need help in creating a report on the function module, I mean do you also have any design related queries?
    -Abhilash

  • Question on How to Use LI and NP Data Comparison Report

    Hi,
    We are trying to figure out how to make the Transaction Code PC00_M42_LLPD (LI and NP Data Comparison Report) work. What file type (.xls, .txt, etc) should be used?  Anyone who is familiar with the transaction, please help.
    Best Regards,
    Bry

    Somewhere in the Oracle 8.0 documentation it is stated that one
    enviroment per each thread is required if I want to ensure
    complete concurrency of different threads accessing databases.
    But isn't this a waste of resources since only Handle Alloc &
    Free functions use Enviroment handle, hence they should be
    mutexed for access from concurrent threads.
    But the most time-consuming functions are ServerAttach &
    SessionBegin which shouldn't be mutexed since they have each
    their own Server/Session handle.
    So my question is if a single OCI Enviroment is enough for the
    most demanding tasks or should I create one enviroment per
    thread?
    Most folks are happy with a single environment. The mutex on the
    env handle is only taken when the OCI library is allocating some
    memory for internal operations.
    Tomislav.

  • Running Unicode-Specifc Reports for ECC 5.0 (Unicode).

    Hi! All,
    I have freshly installed ECC 5.0 (Unicode Kernel 6.40). In ECC manual I cannot found anything about Running Unicode-Specific Reports. But in the case of Solman/XI Unicode version running Unicode-Specific Reports is
    must. (RUTTTYPACT and UMG_POOL_TABLE). Is it also applicable for ECC 5.0 or I do not have run these reports for ECC 5.0 ?
    Also I have installed only ABAP Engine of ECC 5.0 Is it OK. (I mean Fullinstallation of ECC ?) or I have install Java Add-ons also. It it is can you please send me the CD/DVD no. to install JAVA Addon Engine.
    Already I have installed permanent License and config. TMS Domain.
    Thanks and regards,
    Pratip Bhattacharyya

    Solved.

  • How to exclude some criteria like 'setup's owner' on the comparison report?

    We have tested the comparison report between different environments with the option 'display only difference'. However, the report includes all the setup because the owner of the setup is not the same (we have several people who setup our environments) and of course the last update date is also different (as the setup was created manually). How could we exclude from the comparison the "owner" and "last update date" ?
    Thanks
    Edited by: Christophe Ortiz on Dec 1, 2009 11:58 AM

    It requires good amount of code changes. I am afraid, this is not straight forward like changing the metadata. Give me few more days, let me see if there is any hack to achieve it easily.
    Thanks
    Mugunthan.

  • Vendor spend analysis report from ECC as source system

    Hi Experts,
    Currently am working on Functional Specification on a BI report "Vendor Spend Analysis".The source system is ECC.This report should give details about how much the company has spend on a vendor during a particular period along with payment terms , payment term days .
      I have started with Datasource 0FI_AP_4.Please let me know which field(credit or debit field) in the Datasource gives amount spend.I have checked the table EKKO and BSAK .What are the other fields and table i have to take into consideration.Suggest...
    Regards,
    Meera

    Hi Experts,
    Can anyone tell me the table which stores the data regarding the amount paid to a vendor.
    Regards,
    Meera

  • ALV  report in ECC 6.0  'TOP-OF-PAGE'

    Hi Friends,
    Please, Kindly help me on below issue with Alv report for 'TOP-OF-PAGE' in ECC 6.0.
    I have written the following code for "top-of-page' which is not getting the text given on this event, please help me if i committed any mistake in code.
    type-pools : slis.
    TABLES : KNA1,VBAK.
    TYPES: BEGIN OF ty_kna1,
            kunnr TYPE kna1-kunnr,
            land1 TYPE kna1-land1,
            name1 TYPE kna1-name1,
            ort01 TYPE kna1-ort01,
           END OF ty_kna1.
    TYPES: BEGIN OF ty_vbak,
            vbeln TYPE vbak-vbeln,
            erdat TYPE vbak-erdat,
            ernam TYPE vbak-ernam,
            netwr TYPE vbak-netwr,
          END OF ty_vbak.
    DATA : W_KNA1 TYPE TY_KNA1,
           W_VBAK TYPE TY_VBAK,
           I_KNA1 TYPE STANDARD TABLE OF TY_KNA1,
           I_VBAK TYPE STANDARD TABLE OF TY_VBAK.
    DATA : W_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
           I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
    DATA : V_REPID LIKE SY-REPID.
    DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
    DATA: V_EVENTS TYPE SLIS_T_EVENT,
          WA_EVENT TYPE SLIS_ALV_EVENT.
    declartion for layout
    DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
    SELECT-OPTIONS : S_KUNNR FOR KNA1-KUNNR.
    INITIALIZATION.
    V_REPID = SY-REPID.
    PERFORM BUILD_FIELDCAT.
    PERFORM EVENT_CALL.
    PERFORM POPULATE_EVENT.
    START-OF-SELECTION.
    PERFORM DATA_RETRIEVAL.
    PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
    END-OF-SELECTION.
    PERFORM DISPLAY_DATA.
    *&      Form  BUILD_FIELDCAT
          text
    -->  p1        text
    <--  p2        text
    form BUILD_FIELDCAT .
    W_FIELDCAT-TABNAME    = 'I_KNA1'.
    W_FIELDCAT-FIELDNAME  = 'KUNNR'.
    W_FIELDCAT-SELTEXT_M = 'CUST NAME'.
    APPEND W_FIELDCAT TO I_FIELDCAT.
    CLEAR W_FIELDCAT.
    W_FIELDCAT-TABNAME    = 'I_KNA1'.
    W_FIELDCAT-FIELDNAME  = 'LAND1'.
    W_FIELDCAT-SELTEXT_M = 'COUNTRY'.
    APPEND W_FIELDCAT TO I_FIELDCAT.
    CLEAR W_FIELDCAT.
    W_FIELDCAT-TABNAME    = 'I_KNA1'.
    W_FIELDCAT-FIELDNAME  = 'NAME1'.
    W_FIELDCAT-SELTEXT_M = 'NAME'.
    APPEND W_FIELDCAT TO I_FIELDCAT.
    CLEAR W_FIELDCAT.
    W_FIELDCAT-TABNAME    = 'I_KNA1'.
    W_FIELDCAT-FIELDNAME  = 'ORT01'.
    W_FIELDCAT-SELTEXT_M = 'CITY'.
    APPEND W_FIELDCAT TO I_FIELDCAT.
    CLEAR W_FIELDCAT.
    endform.                    " BUILD_FIELDCAT
    *&      Form  DATA_RETRIEVAL
          text
    -->  p1        text
    <--  p2        text
    form DATA_RETRIEVAL .
    SELECT KUNNR LAND1 NAME1 ORT01 FROM KNA1
                                   INTO TABLE I_KNA1
                                   WHERE KUNNR IN S_KUNNR.
    endform.                    " DATA_RETRIEVAL
    *&      Form  DISPLAY_DATA
          text
    -->  p1        text
    <--  p2        text
    form DISPLAY_DATA .
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_INTERFACE_CHECK                 = ' '
      I_BYPASSING_BUFFER                = ' '
      I_BUFFER_ACTIVE                   = ' '
       I_CALLBACK_PROGRAM                = V_REPID
      I_CALLBACK_PF_STATUS_SET          = ' '
      I_CALLBACK_USER_COMMAND           = ' '
       I_CALLBACK_TOP_OF_PAGE            = 'TOP_OF_PAGE'
      I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
      I_CALLBACK_HTML_END_OF_LIST       = ' '
      I_STRUCTURE_NAME                  =
      I_BACKGROUND_ID                   = ' '
      I_GRID_TITLE                      =
      I_GRID_SETTINGS                   =
       IS_LAYOUT                         = ALV_LAYOUT
       IT_FIELDCAT                       = I_FIELDCAT[]
      IT_EXCLUDING                      =
      IT_SPECIAL_GROUPS                 =
      IT_SORT                           =
      IT_FILTER                         =
      IS_SEL_HIDE                       =
      I_DEFAULT                         = 'X'
      I_SAVE                            = ' '
      IS_VARIANT                        =
       IT_EVENTS                         = V_EVENTS
      IT_EVENT_EXIT                     =
      IS_PRINT                          =
      IS_REPREP_ID                      =
      I_SCREEN_START_COLUMN             = 0
      I_SCREEN_START_LINE               = 0
      I_SCREEN_END_COLUMN               = 0
      I_SCREEN_END_LINE                 = 0
      I_HTML_HEIGHT_TOP                 = 0
      I_HTML_HEIGHT_END                 = 0
      IT_ALV_GRAPHICS                   =
      IT_HYPERLINK                      =
      IT_ADD_FIELDCAT                   =
      IT_EXCEPT_QINFO                   =
      IR_SALV_FULLSCREEN_ADAPTER        =
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER           =
      ES_EXIT_CAUSED_BY_USER            =
      TABLES
        t_outtab                          = I_KNA1
    EXCEPTIONS
      PROGRAM_ERROR                     = 1
      OTHERS                            = 2
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    endform.                    " DISPLAY_DATA
    *&      Form  BUILD_LISTHEADER
          text
         -->P_IT_LISTHEADER  text
    form BUILD_LISTHEADER  using i_listheader TYPE SLIS_T_LISTHEADER.
      DATA HLINE TYPE SLIS_LISTHEADER.
      HLINE-INFO = 'CUSTOMER DETAILS'.
      HLINE-TYP = 'H'.
      append hline to it_listheader.
        CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          IT_LIST_COMMENTARY       = I_LISTHEADER
       i_logo                   =
       I_END_OF_LIST_GRID       =
    endform.                    " BUILD_LISTHEADER
    *&      Form  EVENT_CALL
          text
    -->  p1        text
    <--  p2        text
    form EVENT_CALL .
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
         I_LIST_TYPE           = 0
       IMPORTING
         ET_EVENTS             = V_EVENTS
    EXCEPTIONS
       LIST_TYPE_WRONG       = 1
       OTHERS                = 2
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    endform.                    " EVENT_CALL
    *&      Form  POPULATE_EVENT
          text
    -->  p1        text
    <--  p2        text
    form POPULATE_EVENT .
      READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
      IF SY-SUBRC EQ 0.
        WA_EVENT-FORM = 'TOP_OF_PAGE'.
        MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
    WA_EVENT-FORM.
      ENDIF.
    Thanks in Advance,
    Chandra.

    type-pools : slis.
    TABLES : KNA1,VBAK.
    TYPES: BEGIN OF ty_kna1,
    kunnr TYPE kna1-kunnr,
    land1 TYPE kna1-land1,
    name1 TYPE kna1-name1,
    ort01 TYPE kna1-ort01,
    END OF ty_kna1.
    TYPES: BEGIN OF ty_vbak,
    vbeln TYPE vbak-vbeln,
    erdat TYPE vbak-erdat,
    ernam TYPE vbak-ernam,
    netwr TYPE vbak-netwr,
    END OF ty_vbak.
    DATA : W_KNA1 TYPE TY_KNA1,
    W_VBAK TYPE TY_VBAK,
    I_KNA1 TYPE STANDARD TABLE OF TY_KNA1,
    I_VBAK TYPE STANDARD TABLE OF TY_VBAK.
    DATA : W_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
    I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
    DATA : V_REPID LIKE SY-REPID.
    DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
    DATA: V_EVENTS TYPE SLIS_T_EVENT,
    WA_EVENT TYPE SLIS_ALV_EVENT.
    declartion for layout
    DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
    SELECT-OPTIONS : S_KUNNR FOR KNA1-KUNNR.
    INITIALIZATION.
    V_REPID = SY-REPID.
    PERFORM BUILD_FIELDCAT.
    PERFORM EVENT_CALL.
    PERFORM POPULATE_EVENT.
    START-OF-SELECTION.
    PERFORM DATA_RETRIEVAL.
    PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
    END-OF-SELECTION.
    PERFORM DISPLAY_DATA.
    *& Form BUILD_FIELDCAT
    text
    --> p1 text
    <-- p2 text
    form BUILD_FIELDCAT .
    W_FIELDCAT-TABNAME = 'I_KNA1'.
    W_FIELDCAT-FIELDNAME = 'KUNNR'.
    W_FIELDCAT-SELTEXT_M = 'CUST NAME'.
    APPEND W_FIELDCAT TO I_FIELDCAT.
    CLEAR W_FIELDCAT.
    W_FIELDCAT-TABNAME = 'I_KNA1'.
    W_FIELDCAT-FIELDNAME = 'LAND1'.
    W_FIELDCAT-SELTEXT_M = 'COUNTRY'.
    APPEND W_FIELDCAT TO I_FIELDCAT.
    CLEAR W_FIELDCAT.
    W_FIELDCAT-TABNAME = 'I_KNA1'.
    W_FIELDCAT-FIELDNAME = 'NAME1'.
    W_FIELDCAT-SELTEXT_M = 'NAME'.
    APPEND W_FIELDCAT TO I_FIELDCAT.
    CLEAR W_FIELDCAT.
    W_FIELDCAT-TABNAME = 'I_KNA1'.
    W_FIELDCAT-FIELDNAME = 'ORT01'.
    W_FIELDCAT-SELTEXT_M = 'CITY'.
    APPEND W_FIELDCAT TO I_FIELDCAT.
    CLEAR W_FIELDCAT.
    endform. " BUILD_FIELDCAT
    *& Form DATA_RETRIEVAL
    text
    --> p1 text
    <-- p2 text
    form DATA_RETRIEVAL .
    SELECT KUNNR LAND1 NAME1 ORT01 FROM KNA1
    INTO TABLE I_KNA1
    WHERE KUNNR IN S_KUNNR.
    endform. " DATA_RETRIEVAL
    *& Form DISPLAY_DATA
    text
    --> p1 text
    <-- p2 text
    form DISPLAY_DATA .
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    I_INTERFACE_CHECK = ' '
    I_BYPASSING_BUFFER = ' '
    I_BUFFER_ACTIVE = ' '
    I_CALLBACK_PROGRAM = V_REPID
    I_CALLBACK_PF_STATUS_SET = ' '
    I_CALLBACK_USER_COMMAND = ' '
    I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
    I_CALLBACK_HTML_TOP_OF_PAGE = ' '
    I_CALLBACK_HTML_END_OF_LIST = ' '
    I_STRUCTURE_NAME =
    I_BACKGROUND_ID = ' '
    I_GRID_TITLE =
    I_GRID_SETTINGS =
    IS_LAYOUT = ALV_LAYOUT
    IT_FIELDCAT = I_FIELDCAT[]
    IT_EXCLUDING =
    IT_SPECIAL_GROUPS =
    IT_SORT =
    IT_FILTER =
    IS_SEL_HIDE =
    I_DEFAULT = 'X'
    I_SAVE = ' '
    IS_VARIANT =
    IT_EVENTS = V_EVENTS
    IT_EVENT_EXIT =
    IS_PRINT =
    IS_REPREP_ID =
    I_SCREEN_START_COLUMN = 0
    I_SCREEN_START_LINE = 0
    I_SCREEN_END_COLUMN = 0
    I_SCREEN_END_LINE = 0
    I_HTML_HEIGHT_TOP = 0
    I_HTML_HEIGHT_END = 0
    IT_ALV_GRAPHICS =
    IT_HYPERLINK =
    IT_ADD_FIELDCAT =
    IT_EXCEPT_QINFO =
    IR_SALV_FULLSCREEN_ADAPTER =
    IMPORTING
    E_EXIT_CAUSED_BY_CALLER =
    ES_EXIT_CAUSED_BY_USER =
    TABLES
    t_outtab = I_KNA1
    EXCEPTIONS
    PROGRAM_ERROR = 1
    OTHERS = 2
    IF sy-subrc 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    endform. " DISPLAY_DATA
    *& Form BUILD_LISTHEADER
    text
    -->P_IT_LISTHEADER text
    form TOP_OF_PAGE using i_listheader TYPE SLIS_T_LISTHEADER.
    DATA HLINE TYPE SLIS_LISTHEADER.
    HLINE-INFO = 'CUSTOMER DETAILS'.
    HLINE-TYP = 'H'.
    append hline to it_listheader.
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
    IT_LIST_COMMENTARY = I_LISTHEADER
    i_logo =
    I_END_OF_LIST_GRID =
    endform. " BUILD_LISTHEADER
    *& Form EVENT_CALL
    text
    --> p1 text
    <-- p2 text
    form EVENT_CALL .
    CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
    I_LIST_TYPE = 0
    IMPORTING
    ET_EVENTS = V_EVENTS
    EXCEPTIONS
    LIST_TYPE_WRONG = 1
    OTHERS = 2
    IF SY-SUBRC 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    endform. " EVENT_CALL
    *& Form POPULATE_EVENT
    text
    --> p1 text
    <-- p2 text
    form POPULATE_EVENT .
    READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
    IF SY-SUBRC EQ 0.
    WA_EVENT-FORM = 'TOP_OF_PAGE'.
    MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
    WA_EVENT-FORM.
    ENDIF.
    just change the code  as i have u will get it
    plz reward points if useful

  • Error in Asset Transactions Report in ECC 6

    Hi Friends,
    We have upgraded from ECC 4.7 to ECC 6.0 in Nov 2007.
    In Asset Transactions Report (S_ALR_87012048) the Depreciation column is displaying Zero Values for individual line items after November 2007 (ie for Assets posted after Nov, 07).
    We posted the same to SAP and they are saying that since New Depreciation Calculation has been activated, Depreciation on Individual transactions will not be calculated.
    SAP has quoted the following note:
    As per note 965032 point 4d under the header 'No depreciations ontransactions' which states:-
    .... if you use the new depreciation calculation, the system no longer saves depreciations on transactions in the line items. Exceptions to this rule are - proportional value adjustments in the case of retirements or retirement transfers, since these must continue to be calculated at single transaction level.
    My questions are:
    1.Even after this the report with depreciation values as Zero can be grossly misleading (other reports are showing correct values).  Is it correct?
    2.If what SAP is saying is correct, then How is this New Depreciation calculated? If anybody has an idea, please explain...
    I hope i am clear in stating my requirements.
    Thanks in advance.
    SK

    Hello,
    Can you please look in the /put/log directory and copy the error from the appropriate log file. You should find a log file with a name similar the to upgrade phase that is causing the error.
    Thanks
    N.P.C

  • Crystal Report Using ECC Data has Auth error in Infoview

    We've created a Crystal report that successfully accesses ECC data from a function module in our Dev environment when the report is executed from within Crystal Designer.  When we try to execute the same report against the same development ECC system from within InfoView we get the following error:
    ERROR: The Database Logon Information for this report is either incomplete or incorrect. 
    The connection information is the same as it is in designer. We are able to successfully run Crystal Reports over BW data within InfoView. Any ideas about what might be wrong?
    Doug

    Ingo,
    The consumers of the report do have ECC access for order and inventory management so licensing should not be an issue.
    We were able to resolve the issue. The problem was with our version of SAP GUI on the BO Dev server.
    We had to update our u201CServices.dllu201D and our u201CSAPLogonTree.xmlu201D file with an accurate version.  Once that was done, the report executed as expected in InfoView using LDAP.
    Thanks,
    Doug
    Edited by: Douglas Eberle on Jun 13, 2011 6:54 PM

Maybe you are looking for