Error in Asset Transactions Report in ECC 6
Hi Friends,
We have upgraded from ECC 4.7 to ECC 6.0 in Nov 2007.
In Asset Transactions Report (S_ALR_87012048) the Depreciation column is displaying Zero Values for individual line items after November 2007 (ie for Assets posted after Nov, 07).
We posted the same to SAP and they are saying that since New Depreciation Calculation has been activated, Depreciation on Individual transactions will not be calculated.
SAP has quoted the following note:
As per note 965032 point 4d under the header 'No depreciations ontransactions' which states:-
.... if you use the new depreciation calculation, the system no longer saves depreciations on transactions in the line items. Exceptions to this rule are - proportional value adjustments in the case of retirements or retirement transfers, since these must continue to be calculated at single transaction level.
My questions are:
1.Even after this the report with depreciation values as Zero can be grossly misleading (other reports are showing correct values). Is it correct?
2.If what SAP is saying is correct, then How is this New Depreciation calculated? If anybody has an idea, please explain...
I hope i am clear in stating my requirements.
Thanks in advance.
SK
Hello,
Can you please look in the /put/log directory and copy the error from the appropriate log file. You should find a log file with a name similar the to upgrade phase that is causing the error.
Thanks
N.P.C
Similar Messages
-
Asset Transaction report in Document Currency
Hi friends,
We are using Asset Transaction report s_alr_87012039 or s_alr_87012048 to view the Asset line items. The report displays the values in Local Currency, we want to view the asset transaction values in Document Currency? is there any report available in SAP?
Please advice.
Thanks
NTH
Edited by: NTH on Mar 25, 2010 11:41 AMHi,
All the AA reports will output the data based on the currencies that are used in the dep areas of asset master.
In generak 01 area will have LC.
If you want to see asset transactions in DOC curr, go to FBL3N for the asset related recon accounts and choose field like Amt in doc curr and Doc curr.
Hope you have set line item display for your asset related recon accounts in FS00.
Thanks,
Srinu -
Is there any BC DataSource to extract Asset Transaction list
My client is looking for a report to show the detailed list of FA transactions. I checked the DataSources, there is one 0FI_AA_11, Transactions, however, it looks like that is accumulated values to the period level, and my client requires a detailed report to show each transaction with dates.
Is there any DataSource I can use or I have to create a generic DataSource?
<removed by moderator>, thanks.
Tommy
Edited by: Siegfried Szameitat on Dec 3, 2008 3:15 PMI actually have done an asset transaction report purely based on the GL posting
It can only work in version 7 DTP technology using the semantic key to group together transactions of the same fiscal year, document, co code into the same package
Then you "flatten" per doc no the FI journal and by doign so you can move the Vendor fromt he K BSEG record onto the A Asset Record
ie
Dr asset
Dr vat
Cr Vendor
You can then move the vendor number onto the Dr Asset line (which normally helps!)
True you dont get a deprecation area - but then an aset is normally always set up in the std deprecation area then other depn areas for tax differences etc.
However if you want a true asset listing - I just basically use the std AA model and drill down to asset then RRI into this asset transaction report -
ABUMN transactions reports ?
Dear FICO experts,
Pl let me know which is the most appropriate report to see the transaction did thru ABUMN.
The report is to contain the original asset number, value & new asset number & transfered value (full/partial).
pl help
regards
SrihariHi
please look at Asset transaction report
S_ALR_87012048- Asset Transactions
S_ALR_87012050- Asset Acquisitions
S_ALR_87012052- Asset Retirements
Also S_ALR_87012054- Intra company Asset Transfers
Thanks
Sanjeev -
Error while RRI from BW reports to ECC CJI3 transaction
Hi All,
When we try to set up RRI from BW reports to ECC CJI3 transaction, we get an error message (Stop message):
You cannot use the report-report interface to call up report RKREP000
Diagnosis
Line Item report RKPEP000 is not suitable for the report/report interface
Procedure
Always enter RKPEP000 as the receiver report for project line items in the report/report interface. This program uses the transfer parameters to determine which line item reports can be accessed.
<b>As per the other reply tried the ABAP Report RKPEP000/3 also ..no use ..
can you please suggest , how to go about this CJI3 issue for RRI , what settings need to be done in the RSBBS ...</b>
We have attemped to use "S_ALR_87013543" as well but the parameters don't go through properly which means when a user jumps from a BW report, they end up at the ECC selection screen of S_ALR_87013543.
Drill through is working for our Cost Center reports. Just not this one in particular.
Any advice would be greatly appreciated.
prasadHi,
I'm facing the same problem so please If you have found some solution please tell me what should I do to use RRI from BEX query to CJI3 transaction.
Regards,
Ana -
Error While Executing the Asset history report S_ALR_87011990
Hi,
I am getting the below error while executing the Asset History Report - S_ALR_87011990
No data was selected
Message no. AB064
Kindly advice meHi,
Thi may be a authorisation issue. I doubt that it will get recorded in su53 for report executing. Check with basis guy for respective asset class authorization. -
S_ALR_87011990 asset history report error
Dear All
We need to process S_ALR_87011990 asset history report for year 2008 that giving an error. System recommends to proceed AJRW but it is giving error. But we did not do any Year end closed processes for Asset & FI.
We checked using OAAQ - it says 2006 last closed and tcode: OB52 says 2008 for Assets.
Appreciate your help on this.
Thanks
Madhawa
Edited by: Madhawa Jayalath on Jan 20, 2009 7:18 AMHello Madhawa,
ob52 controlls only the periods in the GL. It is possible to close the assets in ob52 but the AM-module is still open for this.
OAAQ displays the last closed fiscal year in AM, start AJAB for 2007 then go on with AJRW for 2009.
Best regards
Horst -
Error in Batch Number Transaction Report
Dear All
While generating 'Batch Number Transaction Report' in SAP B1 8.8 the following error occur which we could not solved:
"Runtime error
R6025 - pure virtual function call"
This occurs when selection is made on item properties for the report.
Please suggest solution.
Thanks & with regards
Aloke BandyopadhyayHi ALok......
Check the thread related to this problem........
Email and PDF Icon on AR Invoice Visual C++ Runtime Error R6025
Also this might be the Microsoft Issue or check Virus run also.....
Regards,
Rhaul -
Assets transaction history Report
Hi,
I Need to Change in the Assets Transcation History Report ,
I store Two Extra Field Information in Reclassfication,Transfer, Mass Changes
i need That Information in Assets Transcation History Report but The Transcation
id of Reclassfication,Transfer, Mass Changes in not Find from Assets Transcation
Report or Form ,Can Any Body Help me to Find the Transaction id of Reclassfication,Transfer, Mass Changes in Assets History Report
Thankshi
use T.code OARP you can get the some reports, if it's not suitable then you can devalop your own reports through Report painter or Query.
satish -
Crystal Report against ECC 6.0 with SSO configured
I created a simple report against the ECC 6.0 Article table and saved it to InfoView. I can run the report fine, but when others run it they get an error stating the logon parameters are incomplete. We are in the process of configuring single sign on and have created other Crystal Reports going against ECC 6.0 with Business Views where SSO turned on in the data connection. Everyone can refresh those reports with no problems. Is their some report setting that needs to be set for Crystal Reports using a data source directly against ECC 6.0 tables?
We have multiple reasons for implementing SNC.
The main reason we have enabled SNC is to simply the users experience while working in the SAP environment. We are going live this month with Plant Maintenance, SRM, Project System, General Ledge and Asset Management reporting cubes in our BW environment as well as in our ECC 6.0 environment. We have set up SAP Portal and have created iviews to BOBJ folders and reports. Users are authenticated once by logging on to the Lan. Once logged on we would like them to seemlessly run SAP transactions and Business Objects reports through the SAP Portal based on their job function. Each user has security setup in BOBJ and SAP to allow access to transactions and reports appropriate for their job function.
We have three types of SAP reports and data connectors.
- One set of Crystal reports go against ECC 6.0 through Business Views with a Data Connection set up for SSO.
- One set of WEBI reports goes against BW queries though Universe Connections set up for SSO.
- One set of Crystal reports go directly against ECC 6.0 tables.
We currently have two issues:
1) The Crystal reports going directly against ECC 6.0 tables are returning the error
Error - The database logon information for this report is either incomplete or incorrect.
2) When we send a link to any report using OpenDocument if the user is not logged on to InfoView they get a rather long error message:
Account Information not recognized: Active Directory Authentication failed to log you on. Please contact your system admin....
Our hardware and server setup is a load balancer connected to a cluster of two Tomcat servers connected to two BOBJ servers. -
Posting of retirement/transfer not possible(error in asset)
Hi All,
this is regarding intra company asset transfer through transaction code ABUMN. The issue is like below :
Let's say asset code is 764 in 111 asset class & i am transferring this asset to 3615 in 112 asset class through ABUMN.
Actaully in 2004, a part of the asset value has already been retired with scrap.So now the requirement is complete transfer the remaining amount. So while trasfer, the error shows and not allowing to post the transaction.
There are several depreciation areas in the asset. The depreciation has been calculated for all the dep. area except 42(for US)
As this book has pending the dep. since 2004, system doesn't allow to trasfer this asset. For this purpose, i have tried AFAR, ASKB but the issue is not solved.
Kindly revert back with your valuable suggestions.
Thanks,
RajHi Raj,
In most cases AA 465 is due to recalculation errors in the past on the asset in question. From your information I assume this is probaby due to depreciation area 42.
I do not know how you were able to close all following fiscal years if errors existed
on the assets with pending depreciation since 2004.
As you known, the indicator ANLC-XAFAR gives the information about errors in the calculation of depreciation.
0 No error occurred during depreciation calculation
1 Error occurred in depreciation calculation from previous yrs
2 Error occurred in depreciation calculation of current year
At this point it may be necessary to execute the report RACORR52 for the fiscal years
that may be closed now and for which the asset in question seems to have an incorrect entry for ANLC-XAFAR. You have to carefully check the asset beforehand though, to be sure that the values on the asset as such are correct as per your expectation. Only then should you consider using the correction report RACORR52.
Please review the attached note in this regard, and follow the instructions given:
103749 - RAJABS00: Error message AU069
This report is not in your system until you manually apply this source code.
Also review SAP note 141656 as it might help, too.
I hope this information helps you further.
Kind regards,
Brigitte -
Use of different fiscal year variant in leading&non leading ledgers and Asset closing&Reporting
Experts,
Need one clarification on using different fiscal year variants for Leading(0L)&non Leading(NL) Ledgers and impact on Fixed Asset Accounting.If I use say V6(Jan2013-Dec2013) for Leading Ledger and April2013-March2014 for non leading Ledger,(local GAAP)-please clarify the following.
1.Does Asset Accounting gives all standard reports as expected in both(Leading&Locals) the Depreciation areas?Do we need to any settings specially for in the above scenario?(I am assuming point#4 given below may not help for this as system gives an error if both the fiscal year variants have different start&end dates)
2.How is Year end in Asset Accounting handled?If I close the year end in Asset Accounting for Company Code as per Leading Ledger i.e say by Dec 2013,can I still post the asset entries in non leading ledger?Because Financial year for Leading ledger will be 2014 and non leading will be still 2013(in Jan2014).
3.I am aware SAP has some restrictions way back in 2005-2007 (SAP note 844029) for different fiscal year variants in Leading&Non Leading Ledgers,Does SAP come out with any solution later?
4.What is the exact use of the settings at Asset Accounting>>Valuation>>>Fiscal year>>Fiscal year variants at company code level or Depreciation area level?My understanding here is,they are not meant for using different fiscal year variant with different start&end dates but they are meant for using different fiscal year variant with same START&END DATES and have different number of posting periods i.e 1 can have 12 and other can have 13.
Please can you give your comments?
regards
hinfiHi Hinfi,
It seems standard SAP does not manage different fiscal year variants (at least with different start/end dates) in different depreciation areas.
However, they came up with an add-on solution called Multiple Calendar Tool and based on a mirroring solution that synchronizes asset transactions in a mirror company code.
It's all explained in following notes:
Note 1175751 - Project solution for alternative fiscal year variant
Note 1636025 - Asset acctg multi calendar tool 1.0_ SP Note
Note 1658489 - Installation of Asset acctg multi calendar 1.0 software
Note 1658714 - Asset acctg multi calendar tool_ Overview Note
Note 1691481 - Release strategy_ Asset acctg multi calendar tool
Note 1951069 - Different fiscal year variants in General Ledger Accounting (New) (NewGL) under the new Asset Accounting (FIN_AA_PARALLEL_VAL)
I don't know if it's commonly used and personnaly have no feedback on it. I was curious to check how to manage a depreciation area 01 posted in a leading ledger in US GAAP (FYV january to december) and another depreciation posted in a non leading ledger in Indian GAAP (FYV april to march).
BR
Gregory -
Asset class Reports and the G/L accounts balances are not tallying
Hi
As per the G/L account (Recon) Furniture is showing 952428.18 and the furniture asset class report is showing 916186.25.
Kindly tell me how to reconcile, the way to find out the differences.
With regars
SivaHi
As per the suggestions given i verified
1. Asset transactions might have posted after posting depreciation for the period
I verified this. there are no postings
2. Depreciation terms (depreciation key, useful life ) might have changed.
The depreciation terms are not changed
3, Manual transactions might have posted directly to GL Accounts.
No manual transactions are there.
Correct the differences by
1. Repeat the depreciation posting program (AFAB)
2. Execute Recalculate (AFAR) and Repeat the depreciation posting program.
I executed AFAR it is updating the G/L accounts only not the FI-AA
3. Check the Manual entries posted in GL Account of Furniture asset class and reverse
manual entries are not posted.
I executed ABST. There are no errors.
i verified the SAP Note. it is basically explaining about AUC(We don't have) reconciliation and this is the first year (3months completed after go-live)
any other possible reconciliation is appreciable
with regards
Siva -
friends,
after running depriciation run successfully, system is showing " Errors occurred when processing assets. See the Error Log " in asset balance report 87011963.
when we go through the errors in assets all are showing the following error message.
Line item causes scrap value of 199,16 to be violated
Message no. AA632
Asset affected: 1XXXXXXXXXX-0
Diagnosis
The book value of the asset is below the the cut-off value in the amount of 199,16.
Procedure
Check your entries for the amount, transaction type and cut-off value specifications, such as memo value, scrap value or cut-off value percentage rate.
i am not able to understand the issue, please suggest,
regards,Hi,
Go to T.code OAYI and check what u have defined as the memo value(retention amount) for each depreciation area/ company code. This memo value is the amount that is not depreciated, in order to have a memo posting for an asset, which has already exceeded its useful life. The system reduces the planned annual depreciation in the acquisition year for the asset by the amount of the memo value.
You can activate or deactivate the memo value by means of an indicator in the asset class, although it has been defined on depreciation area/company code level (this is applies especially to asset classes for low value assets).
Rgds
Nikhil -
Cancelled Invoice showing as Zeros in Unaccounted Transaction Report
The invoices were entered and the error occured because there is no currency rate conversion for entered currency , then we cancelled the invoices .It is showing as 0.00 in Unaccounted Transactions Report and need swept every month." Please suggest how to remove this from report .
Hi,
If it is not validated you can delete this invoice . if validated then needs to do accounting and transfer this to GL ,hopethe cancelled invoice will not have any impact on entries .
Regards
Muthu
Maybe you are looking for
-
I have a windows computer. How can I create apps and put them on itunes?
I have a windows computer. How can I create apps and put them on itunes?
-
Is there a way to copy an attribute from one clip to another?
In one of my clips, I changed the color of someones shirt, and I want to copy that to every single clip so he has that same color shirt in every clip. Is there an easy way to do this, so I don't have to manually color his shirt in every clip by hand?
-
Low power warning for AIR-LAP1242AG-C-K9
Hi Buddie, We purchased some AIR-LAP1242AG-C-K9 , but not perchasing any wireless controller. When I connect the LAP to Cat2950 or Cat2960 PPoE port, all the LAP can not boot normally. It indicates low power, please refer the two pictures attached. B
-
Imac starts with a black screen and flashing white light on console
I have a 24" imac, it is white and it is from the first year they used the intel chip. When I power it up I get a black blank screen and then the white light on the lower right side of the console flashes on and off. I hear the disk drive spin (I put
-
I need help! Premere elements 9 wont open correctly
Hello I am running windows 7 and I have Premere elements 9. I think I got a virus latley and now when I try to open elements 9 it will only open up a mostly gray screen and the only thing I can click on is the Organizer. The project bord, timeline, e