Compile flags disturbe building of package [solved]
Hi.
I have my compile flags set in makepkg.conf, and every package was building ok till now. Yesterday I tryed to build Sphinx with yaourt, but the build stoped when building libsphinxclient. I think it has something to do with the compiler flags set in makepkg.conf. When it builds with yaourt:
/bin/sh ./libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I. -march=athlon64 -O2 -pipe -c -o sphinxclient.lo sphinxclient.c
and the build stops after that (this does not give the error, but it doesn't build some libraries needed afterwards).
When I build it manually, the command differs:
/bin/sh ./libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -c -o sphinxclient.lo sphinxclient.c
The ./configure for the manuall build is the same as from the PKGBUILD
This is the whole build process for libsphinxclient from yaourt:
make[1]: Entering directory `/tmp/yaourt-tmp-krt/aur-sphinx/sphinx/src/sphinx-0.9.8.1/api/libsphinxclient'
/bin/sh ./libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I. -march=athlon64 -O2 -pipe -c -o sphinxclient.lo sphinxclient.c
gcc -DHAVE_CONFIG_H -I. -I. -I. -march=athlon64 -O2 -pipe -c test.c
make[1]: *** No rule to make target `.libs/libsphinxclient.a', needed by `test'. Stop.
make[1]: *** Waiting for unfinished jobs....
mkdir .libs
gcc -DHAVE_CONFIG_H -I. -I. -I. -march=athlon64 -O2 -pipe -c sphinxclient.c -fPIC -DPIC -o .libs/sphinxclient.o
gcc -DHAVE_CONFIG_H -I. -I. -I. -march=athlon64 -O2 -pipe -c sphinxclient.c -o sphinxclient.o >/dev/null 2>&1
make[1]: Leaving directory `/tmp/yaourt-tmp-krt/aur-sphinx/sphinx/src/sphinx-0.9.8.1/api/libsphinxclient'
make: *** [all] Error 2
The build of libsphinxclient manually:
make all-am
make[1]: Entering directory `/home/krt/Desktop/sphinx-0.9.8.1/api/libsphinxclient'
/bin/sh ./libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -c -o sphinxclient.lo sphinxclient.c
mkdir .libs
gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -c sphinxclient.c -fPIC -DPIC -o .libs/sphinxclient.o
gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -c sphinxclient.c -o sphinxclient.o >/dev/null 2>&1
/bin/sh ./libtool --mode=link --tag=CC gcc -g -O2 -o libsphinxclient.la -rpath /usr/lib -release 0.0.1 sphinxclient.lo
gcc -shared .libs/sphinxclient.o -Wl,-soname -Wl,libsphinxclient-0.0.1.so -o .libs/libsphinxclient-0.0.1.so
(cd .libs && rm -f libsphinxclient.so && ln -s libsphinxclient-0.0.1.so libsphinxclient.so)
ar cru .libs/libsphinxclient.a sphinxclient.o
ranlib .libs/libsphinxclient.a
creating libsphinxclient.la
(cd .libs && rm -f libsphinxclient.la && ln -s ../libsphinxclient.la libsphinxclient.la)
gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -c test.c
/bin/sh ./libtool --mode=link --tag=CC gcc -g -O2 -o test test.o .libs/libsphinxclient.a
gcc -g -O2 -o test test.o .libs/libsphinxclient.a
make[1]: Leaving directory `/home/krt/Desktop/sphinx-0.9.8.1/api/libsphinxclient'
In yaourt a whole block of output is skipped after the second line, and it continues with the compiling of test.c:
gcc -DHAVE_CONFIG_H -I. -I. -I. -march=athlon64 -O2 -pipe -c test.c
Since test.c need's libsphinxclient.a and it doesn't exist (it would have been compiled in the skiped part (like in the manually compiled section)), the build isn't successful.
NOTE: I don't know much about compiling, it's just my observation.
Why doesn't it work with the compile flags set?
Last edited by KRTac (2009-08-03 19:39:00)
Well, it appears that the package doesn't build with multiple concurrent build jobs.
Try adding the following above the line beginning with "./configure" and see if it then builds correctly:
export MAKEFLAGS="-j1"
On a side note, I've found -j2 to work perfectly for dual core systems. I've definitely seen -j(number of cores)+1 being suggested elsewhere, but I can't see why -j(number of cores) isn't equally suitable or even more correct.
Similar Messages
-
[solved] building a package with bjam
Hello all,
I'm trying to figure out how to create a package that builds with bjam. When I build the package manually, I only need to run
./bjam --prefix=/usr --with-feature1 --with-feature2 ...etc
and the binaries are created correctly. I need to use "./bjam" because the project supplies its own version of bjam to reassure compatibility with its code.
When I use the same command inside the PKGBUILD, compilation starts fine and in the end I get an error in the build() function, without further explanations.
Since I'm not at all familiar with bjam, can anyone point me to some sample PKGBUILDs or give me some tips how to create the PKGBUILD?
TIA
EDIT: It seems no special procedure is needed. The problem occurs due to a failure in the bjam build which forces makepkg to abort.
Last edited by panosk (2012-09-10 19:35:29)The pkgtools package will do this for you.
See https://wiki.archlinux.org/index.php/Pkgtools for instructions on how to set it up.
Last edited by szim90 (2011-08-03 14:25:58) -
[Solved] Would someone mind building this package for me?
Because I'm having a problem with on of it's build dependencies I'm unable to build this package:
awn-extras-applets-bzr
Would someone mind building it for me? It's for x86_64 and from the AUR. I would definitely appreciate it.
Last edited by Gen2ly (2012-05-01 17:16:23)SidK wrote:I've uploaded it to http://ompldr.org/vZGwxNg/awn-extras-ap … pkg.tar.xz
Do you also need the dependencies from the AUR compiled?
No, I'm good up to then. Installed and it works. Very much appreciate the help. -
Error: Makepkg was unable to build kdenlive package
Another problem building kdenlive. Can anyone shed some light on the problem here, thanks
==>
==> kdenlive dependencies:
- mlt++ (already installed)
==> Continue the building of 'kdenlive'? [Y/n]
==> ----------------------------------------------
==>
==> Building and installing package
==> Making package: kdenlive 0.5_1-2 (Sun Aug 3 13:34:37 CEST 2008)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found kdenlive-0.5-1.tar.gz in build dir
-> Found kdenlive-0.5-gcc43.patch in build dir
==> Validating source files with md5sums...
kdenlive-0.5-1.tar.gz ... Passed
kdenlive-0.5-gcc43.patch ... Passed
==> Extracting Sources...
-> bsdtar -x -f kdenlive-0.5-1.tar.gz
==> Removing existing pkg/ directory...
==> Entering fakeroot environment...
==> Starting build()...
patching file kdenlive/docclipavfile.cpp
patching file kdenlive/docclipproject.cpp
patching file kdenlive/doccliptextfile.cpp
patching file kdenlive/docclipvirtual.cpp
patching file kdenlive/docsubclip.cpp
patching file kdenlive/dynamicToolTip.cpp
patching file kdenlive/effectdesc.cpp
patching file kdenlive/effectparamdialog.cpp
patching file kdenlive/kdenlive.cpp
patching file kdenlive/kmmrulerpanel.cpp
patching file kdenlive/kmmscreen.cpp
patching file kdenlive/krender.cpp
patching file kdenlive/kruler.cpp
patching file kdenlive/krulertimemodel.cpp
patching file kdenlive/ktimeline.cpp
patching file kdenlive/ktrackpanel.cpp
patching file kdenlive/ktrackview.cpp
*** automake (GNU automake) 1.10.1 found.
*** Creating acinclude.m4
make[1]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
make[1]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
*** Creating list of subdirectories
make[1]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
cd . && make -f admin/Makefile.common subdirs
make[2]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
make[2]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
make[1]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
*** Creating configure.files
*** Creating configure.in
make[1]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
cd . && make -f admin/Makefile.common configure.in ;
make[2]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
make[2]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
make[1]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
*** Creating aclocal.m4
acinclude.m4:3699: the serial number must appear before any macro definition
acinclude.m4:3744: the serial number must appear before any macro definition
acinclude.m4:3789: the serial number must appear before any macro definition
acinclude.m4:5997: the serial number must appear before any macro definition
/usr/share/aclocal/smpeg.m4:13: warning: underquoted definition of AM_PATH_SMPEG
/usr/share/aclocal/smpeg.m4:13: run info '(automake)Extending aclocal'
/usr/share/aclocal/smpeg.m4:13: or see http://sources.redhat.com/automake/automake.html#Extending-aclocal
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_static_works, ...): suspicious cache-id, must contain _cv_ to be cached
../../lib/autoconf/general.m4:1973: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:1993: AC_CACHE_CHECK is expanded from...
acinclude.m4:6583: AC_LIBTOOL_LINKER_OPTION is expanded from...
acinclude.m4:8443: _LT_AC_LANG_C_CONFIG is expanded from...
acinclude.m4:8442: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
acinclude.m4:6067: AC_LIBTOOL_SETUP is expanded from...
acinclude.m4:6047: _AC_PROG_LIBTOOL is expanded from...
acinclude.m4:6012: AC_PROG_LIBTOOL is expanded from...
acinclude.m4:11781: AM_PROG_LIBTOOL is expanded from...
acinclude.m4:3472: KDE_PROG_LIBTOOL is expanded from...
configure.in:54: the top level
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:6540: AC_LIBTOOL_COMPILER_OPTION is expanded from...
acinclude.m4:10479: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:8588: _LT_AC_LANG_CXX_CONFIG is expanded from...
acinclude.m4:8587: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from...
acinclude.m4:7580: _LT_AC_TAGCONFIG is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_F77, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:9604: _LT_AC_LANG_F77_CONFIG is expanded from...
acinclude.m4:9603: AC_LIBTOOL_LANG_F77_CONFIG is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_GCJ, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:9704: _LT_AC_LANG_GCJ_CONFIG is expanded from...
acinclude.m4:9703: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from...
*** Creating configure
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_static_works, ...): suspicious cache-id, must contain _cv_ to be cached
../../lib/autoconf/general.m4:1973: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:1993: AC_CACHE_CHECK is expanded from...
acinclude.m4:6583: AC_LIBTOOL_LINKER_OPTION is expanded from...
acinclude.m4:8443: _LT_AC_LANG_C_CONFIG is expanded from...
acinclude.m4:8442: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
acinclude.m4:6067: AC_LIBTOOL_SETUP is expanded from...
acinclude.m4:6047: _AC_PROG_LIBTOOL is expanded from...
acinclude.m4:6012: AC_PROG_LIBTOOL is expanded from...
acinclude.m4:11781: AM_PROG_LIBTOOL is expanded from...
acinclude.m4:3472: KDE_PROG_LIBTOOL is expanded from...
configure.in:54: the top level
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:6540: AC_LIBTOOL_COMPILER_OPTION is expanded from...
acinclude.m4:10479: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:8588: _LT_AC_LANG_CXX_CONFIG is expanded from...
acinclude.m4:8587: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from...
acinclude.m4:7580: _LT_AC_TAGCONFIG is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_F77, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:9604: _LT_AC_LANG_F77_CONFIG is expanded from...
acinclude.m4:9603: AC_LIBTOOL_LANG_F77_CONFIG is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_GCJ, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:9704: _LT_AC_LANG_GCJ_CONFIG is expanded from...
acinclude.m4:9703: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from...
*** Creating config.h template
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_static_works, ...): suspicious cache-id, must contain _cv_ to be cached
../../lib/autoconf/general.m4:1973: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:1993: AC_CACHE_CHECK is expanded from...
acinclude.m4:6583: AC_LIBTOOL_LINKER_OPTION is expanded from...
acinclude.m4:8443: _LT_AC_LANG_C_CONFIG is expanded from...
acinclude.m4:8442: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
acinclude.m4:6067: AC_LIBTOOL_SETUP is expanded from...
acinclude.m4:6047: _AC_PROG_LIBTOOL is expanded from...
acinclude.m4:6012: AC_PROG_LIBTOOL is expanded from...
acinclude.m4:11781: AM_PROG_LIBTOOL is expanded from...
acinclude.m4:3472: KDE_PROG_LIBTOOL is expanded from...
configure.in:54: the top level
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:6540: AC_LIBTOOL_COMPILER_OPTION is expanded from...
acinclude.m4:10479: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:8588: _LT_AC_LANG_CXX_CONFIG is expanded from...
acinclude.m4:8587: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from...
acinclude.m4:7580: _LT_AC_TAGCONFIG is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_F77, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:9604: _LT_AC_LANG_F77_CONFIG is expanded from...
acinclude.m4:9603: AC_LIBTOOL_LANG_F77_CONFIG is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_GCJ, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:9704: _LT_AC_LANG_GCJ_CONFIG is expanded from...
acinclude.m4:9703: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from...
*** Creating Makefile templates
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_static_works, ...): suspicious cache-id, must contain _cv_ to be cached
../../lib/autoconf/general.m4:1973: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:1993: AC_CACHE_CHECK is expanded from...
acinclude.m4:6583: AC_LIBTOOL_LINKER_OPTION is expanded from...
acinclude.m4:8443: _LT_AC_LANG_C_CONFIG is expanded from...
acinclude.m4:8442: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
acinclude.m4:6067: AC_LIBTOOL_SETUP is expanded from...
acinclude.m4:6047: _AC_PROG_LIBTOOL is expanded from...
acinclude.m4:6012: AC_PROG_LIBTOOL is expanded from...
acinclude.m4:11781: AM_PROG_LIBTOOL is expanded from...
acinclude.m4:3472: KDE_PROG_LIBTOOL is expanded from...
configure.in:54: the top level
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:6540: AC_LIBTOOL_COMPILER_OPTION is expanded from...
acinclude.m4:10479: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:8588: _LT_AC_LANG_CXX_CONFIG is expanded from...
acinclude.m4:8587: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from...
acinclude.m4:7580: _LT_AC_TAGCONFIG is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_F77, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:9604: _LT_AC_LANG_F77_CONFIG is expanded from...
acinclude.m4:9603: AC_LIBTOOL_LANG_F77_CONFIG is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_GCJ, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:9704: _LT_AC_LANG_GCJ_CONFIG is expanded from...
acinclude.m4:9703: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from...
renderer/Makefile.am:4: compiling `kdenlive_renderer.c' with per-target flags requires `AM_PROG_CC_C_O' in `configure.in'
*** Postprocessing Makefile templates
*** Creating date/time stamp
*** Finished
Don't forget to run ./configure
If you haven't done so in a while, run ./configure --help
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /bin/install -c
checking for -p flag to install... yes
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for kde-config... /opt/kde/bin/kde-config
checking where to install... /opt/kde (as requested)
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether gcc is blacklisted... no
checking whether g++ supports -Wmissing-format-attribute... yes
checking whether gcc supports -Wmissing-format-attribute... yes
checking whether g++ supports -Wundef... yes
checking whether g++ supports -Wno-long-long... yes
checking whether g++ supports -Wno-non-virtual-dtor... yes
checking whether g++ supports -fno-reorder-blocks... yes
checking whether g++ supports -fno-exceptions... yes
checking whether g++ supports -fno-check-new... yes
checking whether g++ supports -fno-common... yes
checking whether g++ supports -fexceptions... yes
checking whether system headers can cope with -O2 -fno-inline... irrelevant
checking how to run the C++ preprocessor... g++ -E
checking whether g++ supports -O0... yes
checking whether g++ supports -Wl,--no-undefined... yes
checking whether g++ supports -Wl,--allow-shlib-undefined... yes
not using lib directory suffix
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... gfortran
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether gfortran accepts -g... yes
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag works... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for shl_load... (cached) no
checking for shl_load in -ldld... (cached) no
checking for dlopen... (cached) no
checking for dlopen in -ldl... (cached) yes
checking whether a program can dlopen itself... (cached) yes
checking whether a statically linked program can dlopen itself... (cached) yes
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for gfortran option to produce PIC... -fPIC
checking if gfortran PIC flag -fPIC works... yes
checking if gfortran supports -c -o file.o... yes
checking whether the gfortran linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking if C++ programs can be compiled... yes
checking for strlcat... no
checking if strlcat needs custom prototype... yes - in libkdefakes
checking for strlcpy... no
checking if strlcpy needs custom prototype... yes - in libkdefakes
checking for main in -lutil... yes
checking for main in -lcompat... no
checking for crypt in -lcrypt... yes
checking for socklen_t... yes
checking for dnet_ntoa in -ldnet... no
checking for dnet_ntoa in -ldnet_stub... no
checking for inet_ntoa... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for sys/types.h... (cached) yes
checking for stdint.h... (cached) yes
checking sys/bitypes.h usability... yes
checking sys/bitypes.h presence... yes
checking for sys/bitypes.h... yes
checking for poll in -lpoll... no
checking Carbon/Carbon.h usability... no
checking Carbon/Carbon.h presence... no
checking for Carbon/Carbon.h... no
checking CoreAudio/CoreAudio.h usability... no
checking CoreAudio/CoreAudio.h presence... no
checking for CoreAudio/CoreAudio.h... no
checking if res_init needs -lresolv... yes
checking for res_init... yes
checking if res_init needs custom prototype... no
checking for killpg in -lucb... no
checking size of int... 4
checking size of short... 2
checking size of long... 4
checking size of char *... 4
checking for dlopen in -ldl... (cached) yes
checking for shl_unload in -ldld... no
checking size of size_t... 4
checking size of unsigned long... 4
checking sizeof size_t == sizeof unsigned long... yes
checking for PIE support... yes
checking if enabling -pie/fPIE support... yes
checking crt_externs.h usability... no
checking crt_externs.h presence... no
checking for crt_externs.h... no
checking for _NSGetEnviron... no
checking for vsnprintf... yes
checking for snprintf... yes
checking for X... libraries /usr/lib, headers .
checking for IceConnectionNumber in -lICE... yes
checking for libXext... yes
checking for pthread_create in -lpthread... yes
checking for extra includes... no
checking for extra libs... no
checking for libz... -lz
checking for libpng... -lpng -lz -lm
checking for libjpeg6b... no
checking for libjpeg... -ljpeg
checking for perl... /usr/bin/perl
checking for Qt... libraries /opt/qt/lib, headers /opt/qt/include using -mt
checking for moc... /opt/qt/bin/moc
checking for uic... /opt/qt/bin/uic
checking whether uic supports -L ... yes
checking whether uic supports -nounload ... yes
checking if Qt needs -ljpeg... no
checking for rpath... yes
checking for KDE... libraries /opt/kde/lib, headers /opt/kde/include
checking if UIC has KDE plugins available... yes
checking for KDE paths... defaults
checking for dcopidl... /opt/kde/bin/dcopidl
checking for dcopidl2cpp... /opt/kde/bin/dcopidl2cpp
checking for mcopidl... /opt/kde/bin/mcopidl
checking for artsc-config... /opt/kde/bin/artsc-config
checking for meinproc... /opt/kde/bin/meinproc
checking for kconfig_compiler... /opt/kde/bin/kconfig_compiler
checking for dcopidlng... /opt/kde/bin/dcopidlng
checking for xmllint... /usr/bin/xmllint
checking whether byte ordering is bigendian... no
checking for MAXPATHLEN... 4096
checking for mlt-config... /usr/bin/mlt-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for LIBIEC61883... yes
checking libavc1394/avc1394.h usability... yes
checking libavc1394/avc1394.h presence... yes
checking for libavc1394/avc1394.h... yes
configure: creating ./config.status
wrong input (flag != 4) at admin/conf.change.pl line 117, <> line 966.
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
checking if doc should be compiled... yes
checking if graphics should be compiled... yes
checking if icons should be compiled... yes
checking if kdenlive should be compiled... yes
checking if pgm should be compiled... yes
checking if po should be compiled... yes
checking if profiles should be compiled... yes
checking if renderer should be compiled... yes
configure: creating ./config.status
wrong input (flag != 4) at admin/conf.change.pl line 117, <> line 1397.
config.status: creating Makefile
config.status: creating doc/Makefile
config.status: creating doc/de/Makefile
config.status: creating doc/en/Makefile
config.status: creating doc/fr/Makefile
config.status: creating doc/it/Makefile
config.status: creating graphics/Makefile
config.status: creating icons/Makefile
config.status: creating icons/hicolor/Makefile
config.status: creating icons/hicolor/22x22/Makefile
config.status: creating icons/hicolor/22x22/actions/Makefile
config.status: creating icons/hicolor/32x32/Makefile
config.status: creating icons/hicolor/32x32/actions/Makefile
config.status: creating kdenlive/Makefile
config.status: creating pgm/Makefile
config.status: creating pgm/PAL/Makefile
config.status: creating po/Makefile
config.status: creating profiles/Makefile
config.status: creating renderer/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
Good - your configure finished. Start make now
make all-recursive
make[1]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
Making all in doc
make[2]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc'
Making all in .
make[3]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc'
Making all in fr
make[3]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc/fr'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc/fr'
Making all in en
make[3]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc/en'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc/en'
Making all in de
make[3]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc/de'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc/de'
Making all in it
make[3]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc/it'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc/it'
make[2]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc'
Making all in graphics
make[2]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/graphics'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/graphics'
Making all in icons
make[2]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons'
Making all in hicolor
make[3]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor'
Making all in 32x32
make[4]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/32x32'
Making all in actions
make[5]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/32x32/actions'
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/32x32/actions'
make[5]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/32x32'
make[5]: Nothing to be done for `all-am'.
make[5]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/32x32'
make[4]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/32x32'
Making all in 22x22
make[4]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/22x22'
Making all in actions
make[5]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/22x22/actions'
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/22x22/actions'
make[5]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/22x22'
make[5]: Nothing to be done for `all-am'.
make[5]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/22x22'
make[4]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/22x22'
make[4]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor'
make[4]: Nothing to be done for `all-am'.
make[4]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor'
make[3]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor'
make[3]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons'
make[2]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons'
Making all in kdenlive
make[2]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/kdenlive'
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT docclipavfile.o -MD -MP -MF .deps/docclipavfile.Tpo -c -o docclipavfile.o docclipavfile.cpp
In file included from docclipref.h:37,
from clipmanager.h:32,
from docclipavfile.cpp:30:
effectstack.h:39: warning: type qualifiers ignored on function return type
docclipavfile.h: In constructor 'DocClipAVFile::DocClipAVFile(const QString&, const KURL&, uint)':
docclipavfile.h:212: warning: 'DocClipAVFile::m_ttl' will be initialized after
docclipavfile.h:197: warning: 'bool DocClipAVFile::m_hasCrossfade'
docclipavfile.cpp:37: warning: when initialized here
docclipavfile.h: In constructor 'DocClipAVFile::DocClipAVFile(const QString&, const GenTime&, uint)':
docclipavfile.h:197: warning: 'DocClipAVFile::m_hasCrossfade' will be initialized after
docclipavfile.h:182: warning: 'bool DocClipAVFile::m_durationKnown'
docclipavfile.cpp:49: warning: when initialized here
docclipavfile.h: In constructor 'DocClipAVFile::DocClipAVFile(const KURL&, const GenTime&, bool, uint)':
docclipavfile.h:197: warning: 'DocClipAVFile::m_hasCrossfade' will be initialized after
docclipavfile.h:180: warning: 'KURL DocClipAVFile::m_url'
docclipavfile.cpp:60: warning: when initialized here
docclipavfile.h: In constructor 'DocClipAVFile::DocClipAVFile(const KURL&, const QString&, const int&, const GenTime&, bool, bool, const QString&, double, uint, uint)':
docclipavfile.h:216: warning: 'DocClipAVFile::m_lumaduration' will be initialized after
docclipavfile.h:184: warning: 'double DocClipAVFile::m_framesPerSecond'
docclipavfile.cpp:77: warning: when initialized here
docclipavfile.cpp: At global scope:
docclipavfile.cpp:77: warning: unused parameter 'extension'
docclipavfile.h: In constructor 'DocClipAVFile::DocClipAVFile(const KURL&)':
docclipavfile.h:197: warning: 'DocClipAVFile::m_hasCrossfade' will be initialized after
docclipavfile.h:182: warning: 'bool DocClipAVFile::m_durationKnown'
docclipavfile.cpp:92: warning: when initialized here
docclipavfile.cpp: At global scope:
docclipavfile.cpp:421: warning: unused parameter 'startTime'
docclipavfile.cpp:421: warning: unused parameter 'endTime'
docclipavfile.cpp: In member function 'virtual QDomDocument DocClipAVFile::sceneToXML(const GenTime&, const GenTime&) const':
docclipavfile.cpp:423: warning: control reaches end of non-void function
mv -f .deps/docclipavfile.Tpo .deps/docclipavfile.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT docclipproject.o -MD -MP -MF .deps/docclipproject.Tpo -c -o docclipproject.o docclipproject.cpp
docclipproject.cpp:909:3: warning: #warning "this line might be the cause of significant trouble"
In file included from docclipref.h:37,
from docclipproject.h:22,
from docclipproject.cpp:18:
effectstack.h:39: warning: type qualifiers ignored on function return type
In file included from docclipproject.cpp:18:
docclipproject.h:53: warning: type qualifiers ignored on function return type
docclipproject.h:54: warning: type qualifiers ignored on function return type
docclipproject.cpp: In member function 'void DocClipProject::slotAddTrack(DocTrackBase*, int)':
docclipproject.cpp:98: warning: comparison between signed and unsigned integer expressions
docclipproject.cpp: In member function 'void DocClipProject::slotDeleteTrack(int)':
docclipproject.cpp:121: warning: comparison between signed and unsigned integer expressions
docclipproject.cpp: In member function 'virtual const DocClipBase::CLIPTYPE& DocClipProject::clipType() const':
docclipproject.cpp:728: warning: returning reference to temporary
mv -f .deps/docclipproject.Tpo .deps/docclipproject.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT doccliptextfile.o -MD -MP -MF .deps/doccliptextfile.Tpo -c -o doccliptextfile.o doccliptextfile.cpp
doccliptextfile.cpp:273:2: warning: #warning TODO - write this funtion.
In file included from docclipref.h:37,
from clipmanager.h:32,
from doccliptextfile.cpp:30:
effectstack.h:39: warning: type qualifiers ignored on function return type
doccliptextfile.cpp: In member function 'virtual void DocClipTextFile::removeTmpFile() const':
doccliptextfile.cpp:111: warning: 'static bool KIO::NetAccess::del(const KURL&)' is deprecated (declared at /opt/kde/include/kio/netaccess.h:347)
doccliptextfile.cpp: At global scope:
doccliptextfile.cpp:150: warning: unused parameter 'element'
doccliptextfile.cpp:212: warning: unused parameter 'startTime'
doccliptextfile.cpp:212: warning: unused parameter 'endTime'
doccliptextfile.cpp: In member function 'uint DocClipTextFile::numReferences() const':
doccliptextfile.cpp:274: warning: control reaches end of non-void function
doccliptextfile.cpp: In member function 'virtual QDomDocument DocClipTextFile::sceneToXML(const GenTime&, const GenTime&) const':
doccliptextfile.cpp:214: warning: control reaches end of non-void function
doccliptextfile.cpp: In static member function 'static DocClipTextFile* DocClipTextFile::createClip(QDomElement)':
doccliptextfile.cpp:165: warning: control reaches end of non-void function
mv -f .deps/doccliptextfile.Tpo .deps/doccliptextfile.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT docclipvirtual.o -MD -MP -MF .deps/docclipvirtual.Tpo -c -o docclipvirtual.o docclipvirtual.cpp
docclipvirtual.cpp:186:2: warning: #warning TODO - write this funtion.
In file included from docclipref.h:37,
from clipmanager.h:32,
from docclipvirtual.cpp:30:
effectstack.h:39: warning: type qualifiers ignored on function return type
docclipvirtual.h: In constructor 'DocClipVirtual::DocClipVirtual(const KURL&, const QString&, const QString&, GenTime, GenTime, uint)':
docclipvirtual.h:138: warning: 'DocClipVirtual::m_end' will be initialized after
docclipvirtual.h:128: warning: 'DocClipBase::CLIPTYPE DocClipVirtual::m_clipType'
docclipvirtual.cpp:34: warning: when initialized here
docclipvirtual.cpp: In member function 'virtual void DocClipVirtual::removeTmpFile() const':
docclipvirtual.cpp:85: warning: 'static bool KIO::NetAccess::del(const KURL&)' is deprecated (declared at /opt/kde/include/kio/netaccess.h:347)
docclipvirtual.cpp: At global scope:
docclipvirtual.cpp:105: warning: unused parameter 'element'
docclipvirtual.cpp:133: warning: unused parameter 'startTime'
docclipvirtual.cpp:133: warning: unused parameter 'endTime'
docclipvirtual.cpp: In member function 'uint DocClipVirtual::numReferences() const':
docclipvirtual.cpp:187: warning: control reaches end of non-void function
docclipvirtual.cpp: In member function 'virtual QDomDocument DocClipVirtual::sceneToXML(const GenTime&, const GenTime&) const':
docclipvirtual.cpp:135: warning: control reaches end of non-void function
docclipvirtual.cpp: In static member function 'static DocClipVirtual* DocClipVirtual::createClip(QDomElement)':
docclipvirtual.cpp:107: warning: control reaches end of non-void function
mv -f .deps/docclipvirtual.Tpo .deps/docclipvirtual.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT docsubclip.o -MD -MP -MF .deps/docsubclip.Tpo -c -o docsubclip.o docsubclip.cpp
docsubclip.cpp:82:2: warning: #warning - needs writing.
docsubclip.cpp:129:2: warning: #warning - need to re-add in/out points correctly.
docsubclip.cpp:149:3: warning: #warning - needs to be written
In file included from docclipref.h:37,
from docclipreflist.h:22,
from doctrackbase.h:24,
from doctrackbaselist.h:23,
from kdenlivedoc.h:32,
from docsubclip.cpp:19:
effectstack.h:39: warning: type qualifiers ignored on function return type
docsubclip.cpp:26: warning: unused parameter 'doc'
docsubclip.cpp:80: warning: unused parameter 'doc'
docsubclip.cpp:80: warning: unused parameter 'element'
docsubclip.cpp:127: warning: unused parameter 'startTime'
docsubclip.cpp:127: warning: unused parameter 'endTime'
docsubclip.cpp:142: warning: unused parameter 'toPopulate'
docsubclip.cpp:147: warning: unused parameter 'element'
mv -f .deps/docsubclip.Tpo .deps/docsubclip.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT dynamicToolTip.o -MD -MP -MF .deps/dynamicToolTip.Tpo -c -o dynamicToolTip.o dynamicToolTip.cpp
In file included from docclipref.h:37,
from docclipreflist.h:22,
from doctrackbase.h:24,
from kmmtrackpanel.h:27,
from dynamicToolTip.cpp:24:
effectstack.h:39: warning: type qualifiers ignored on function return type
kruler.h:31: warning: '<unnamed>::g_scrollTimerDelay' defined but not used
kruler.h:32: warning: '<unnamed>::g_scrollThreshold' defined but not used
mv -f .deps/dynamicToolTip.Tpo .deps/dynamicToolTip.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT effectdesc.o -MD -MP -MF .deps/effectdesc.Tpo -c -o effectdesc.o effectdesc.cpp
In file included from effectdesc.cpp:24:
effectparamdesc.h:99: warning: type qualifiers ignored on function return type
effectdesc.cpp:69: warning: unused parameter 'name'
effectdesc.cpp:69: warning: unused parameter 'video'
effectdesc.cpp:69: warning: unused parameter 'audio'
mv -f .deps/effectdesc.Tpo .deps/effectdesc.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT effectparamdialog.o -MD -MP -MF .deps/effectparamdialog.Tpo -c -o effectparamdialog.o effectparamdialog.cpp
In file included from ./docclipref.h:37,
from ./docclipreflist.h:22,
from ./doctrackbase.h:24,
from ./kmmtrackpanel.h:27,
from effectparamdialog.cpp:34:
./effectstack.h:39: warning: type qualifiers ignored on function return type
In file included from effectparamdialog.cpp:36:
effectparamdesc.h:99: warning: type qualifiers ignored on function return type
./kruler.h:31: warning: '<unnamed>::g_scrollTimerDelay' defined but not used
./kruler.h:32: warning: '<unnamed>::g_scrollThreshold' defined but not used
mv -f .deps/effectparamdialog.Tpo .deps/effectparamdialog.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT kdenlive.o -MD -MP -MF .deps/kdenlive.Tpo -c -o kdenlive.o kdenlive.cpp
In file included from kdenlive.cpp:115:
trackpanelclipmovefunction.h:166:2: warning: #warning - The following method is a bad example for programming design.
In file included from kdenlive.cpp:39:
/opt/kde/include/kedittoolbar.h:271: warning: 'KEditToolbarWidget' has a field 'KEditToolbarWidget::m_inactiveList' whose type uses the anonymous namespace
/opt/kde/include/kedittoolbar.h:271: warning: 'KEditToolbarWidget' has a field 'KEditToolbarWidget::m_activeList' whose type uses the anonymous namespace
In file included from /opt/kde/include/kfileitem.h:31,
from kdenlive.cpp:58:
/opt/kde/include/kfilemetainfo.h:1237: warning: type qualifiers ignored on function return type
In file included from ./docclipref.h:37,
from ./docclipproject.h:22,
from ./exportdvddialog.h:28,
from ./kdenlive.h:48,
from capturemonitor.h:22,
from kdenlive.cpp:65:
./effectstack.h:39: warning: type qualifiers ignored on function return type
In file included from ./exportdvddialog.h:28,
from ./kdenlive.h:48,
from capturemonitor.h:22,
from kdenlive.cpp:65:
./docclipproject.h:53: warning: type qualifiers ignored on function return type
./docclipproject.h:54: warning: type qualifiers ignored on function return type
In file included from /opt/qt/include/qdragobject.h:50,
from /opt/kde/include/kurldrag.h:24,
from clipdrag.h:21,
from kdenlive.cpp:66:
/opt/qt/include/qimage.h: In member function 'bool QImageTextKeyLang::operator<(const QImageTextKeyLang&) const':
/opt/qt/include/qimage.h:61: warning: suggest parentheses around && within ||
In file included from kdenlive.cpp:74:
documentbasenode.h: At global scope:
documentbasenode.h:56: warning: type qualifiers ignored on function return type
In file included from kdenlive.cpp:104:
documentgroupnode.h:40: warning: type qualifiers ignored on function return type
kdenlive.cpp: In member function 'void Gui::KdenliveApp::slotSetClipDuration()':
kdenlive.cpp:3267: warning: unused variable 'ok'
kdenlive.cpp: In member function 'void Gui::KdenliveApp::slotProjectDeleteClips(QStringList)':
kdenlive.cpp:3441: warning: unused variable 'refClip'
mv -f .deps/kdenlive.Tpo .deps/kdenlive.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT kmmrulerpanel.o -MD -MP -MF .deps/kmmrulerpanel.Tpo -c -o kmmrulerpanel.o kmmrulerpanel.cpp
kmmrulerpanel.cpp: In member function 'int Gui::KMMRulerPanel::selectedMenuItem()':
kmmrulerpanel.cpp:160: warning: comparison between signed and unsigned integer expressions
mv -f .deps/kmmrulerpanel.Tpo .deps/kmmrulerpanel.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT kmmscreen.o -MD -MP -MF .deps/kmmscreen.Tpo -c -o kmmscreen.o kmmscreen.cpp
In file included from docclipref.h:37,
from krender.h:34,
from kmmscreen.cpp:24:
effectstack.h:39: warning: type qualifiers ignored on function return type
In file included from exportdvddialog.h:28,
from kdenlive.h:48,
from krendermanager.h:26,
from kmmscreen.cpp:25:
docclipproject.h:53: warning: type qualifiers ignored on function return type
docclipproject.h:54: warning: type qualifiers ignored on function return type
mv -f .deps/kmmscreen.Tpo .deps/kmmscreen.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT krender.o -MD -MP -MF .deps/krender.Tpo -c -o krender.o krender.cpp
krender.cpp:26:29: error: ffmpeg/avformat.h: No such file or directory
In file included from krender.cpp:40:
/opt/qt/include/qimage.h: In member function 'bool QImageTextKeyLang::operator<(const QImageTextKeyLang&) const':
/opt/qt/include/qimage.h:61: warning: suggest parentheses around && within ||
In file included from ./docclipref.h:37,
from ./docclipproject.h:22,
from ./exportdvddialog.h:28,
from ./kdenlive.h:48,
from krender.cpp:53:
./effectstack.h: At global scope:
./effectstack.h:39: warning: type qualifiers ignored on function return type
In file included from ./exportdvddialog.h:28,
from ./kdenlive.h:48,
from krender.cpp:53:
./docclipproject.h:53: warning: type qualifiers ignored on function return type
./docclipproject.h:54: warning: type qualifiers ignored on function return type
In file included from krender.cpp:57:
effectparamdesc.h:99: warning: type qualifiers ignored on function return type
krender.h: In constructor 'KRender::KRender(const QString&, QWidget*, const char*)':
krender.h:190: warning: 'KRender::m_winid' will be initialized after
krender.h:171: warning: 'double KRender::m_framePosition'
krender.cpp:62: warning: when initialized here
krender.h:174: warning: 'KRender::m_generateScenelist' will be initialized after
krender.h:162: warning: 'bool KRender::isBlocked'
krender.cpp:62: warning: when initialized here
krender.cpp:76: warning: deprecated conversion from string constant to 'char*'
krender.cpp: At global scope:
krender.cpp:121: warning: unused parameter 'self'
krender.cpp: In member function 'void KRender::createVideoXWindow(WId, WId)':
krender.cpp:146: warning: deprecated conversion from string constant to 'char*'
krender.cpp:180: warning: deprecated conversion from string constant to 'char*'
krender.cpp: In member function 'QPixmap KRender::extractFrame(int, int, int)':
krender.cpp:254: warning: deprecated conversion from string constant to 'char*'
krender.cpp: In member function 'QPixmap KRender::getVideoThumbnail(KURL, int, int, int)':
krender.cpp:303: warning: deprecated conversion from string constant to 'char*'
krender.cpp: In member function 'void KRender::getImage(KURL, int, int, int)':
krender.cpp:324: warning: deprecated conversion from string constant to 'char*'
krender.cpp: In member function 'void KRender::getFileProperties(KURL, uint)':
krender.cpp:426: warning: deprecated conversion from string constant to 'char*'
krender.cpp:447: error: 'AVFormatContext' was not declared in this scope
krender.cpp:447: error: 'context' was not declared in this scope
krender.cpp:447: error: expected primary-expression before ')' token
krender.cpp:447: error: expected `;' before 'mlt_properties_get_data'
krender.cpp:453: error: expected primary-expression before ')' token
krender.cpp:453: error: expected `;' before 'mlt_properties_get_data'
krender.cpp: In member function 'void KRender::setSceneList(QDomDocument, int)':
krender.cpp:511: warning: deprecated conversion from string constant to 'char*'
krender.cpp:552: warning: deprecated conversion from string constant to 'char*'
krender.cpp: In member function 'const GenTime& KRender::seekPosition() const':
krender.cpp:785: warning: returning reference to temporary
krender.cpp:786: warning: returning reference to temporary
krender.cpp: At global scope:
krender.cpp:823: warning: unused parameter 'dropped'
krender.cpp:843: warning: unused parameter 'sig'
krender.cpp:895: warning: unused parameter 'startTime'
krender.cpp:895: warning: unused parameter 'endTime'
krender.cpp: In member function 'void KRender::exportCurrentFrame(KURL, bool)':
krender.cpp:948: warning: deprecated conversion from string constant to 'char*'
krender.cpp: At global scope:
krender.cpp:937: warning: unused parameter 'notify'
krender.cpp:121: warning: 'void consumer_stopped(mlt_consumer_s*, KRender*, mlt_frame_s*)' defined but not used
make[2]: *** [krender.o] Error 1
make[2]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/kdenlive'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
make: *** [all] Error 2
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build kdenlive package.You sir should be up there with the Gods, thank you - it now compiles.
I still have a problem as it now crashes and not many clues as to why.
kdenlive
kdenlive: + + YOUR MLT INSTALL WAS FOUND IN: /usr
kdenlive: Mlt inited
kdenlive: Creating new document
kdenlive: deleting contents...
kdenlive: Creating new document DONE
kdenlive: Creating new document
kdenlive: deleting contents...
kdenlive: Creating new document DONE
kdenlive: **************** INIT DOCUMENT VIEW ***************
kdenlive: + + CREATING CONSUMER WITH PROFILE: atsc_1080i_60
kdenlive: + + CREATING CONSUMER WITH PROFILE: atsc_1080i_60
kdenlive: Creating new document
kdenlive: deleting contents...
kdenlive: Creating new document DONE
KCrash: Application 'kdenlive' crashing...
and
[KCrash handler]
#6 0xb7effca7 in mlt_properties_fetch () from /usr/lib/libmlt.so.0.2.4
If any light can be shed on this, I would be on cloud 9 -
What are the benefits of compiling in a fakeroot environment? [SOLVED]
Out of curiosity, what exactly are the benefits of compiling packages in a fakeroot environment? There are a couple packages I've had to compile manually before running makepkg because they wouldn't compile in a fakeroot environment, and was just wondering what the benefits are as to why all packages are compiled in such a way (without an option to disable it).
Last edited by deltaecho (2009-02-22 22:38:03)I only know of downsside and problems doing so. Only installing needs to be done within fakeroot. Next version of pacman will support separate build and package function to solve this issue.
-
im tying to build a package with yaourt and it isnt working.
[mark@markspc ~]$ yaourt -S indicator-applet
==> Resuming previous build
==> Downloading indicator-applet PKGBUILD from AUR...
==> Last 5 comments ordered by date (asc):
Comment by: lumpy211 on Fri, 13 Nov 2009 19:51:52 +0000
Phrodo,
It doesn't work for me either, it just crashes even with libindicator.
Comment by: max.bra on Sun, 15 Nov 2009 10:48:19 +0000
don't use now (0.2.0-1)
it doesn't work and install file directly onto the system overwriting a gdm package file (no real package creation and no real remove/clean)
trying to do better. hold on.
Comment by: max.bra on Mon, 16 Nov 2009 21:08:35 +0000
The situation is slightly better.
now indicator-applet-session work as expected. tested with empathy and pidgin.
indicator-applet (the icon with the letter envelope) even that seems to work (tested with /usr/libexec/im-client) but nothing on arch trigger compatible events. as usual applications are patched upstream. standard compiling of available sources, also lacks of initial menu applet found in Ubuntu to launch applications.
no localization at the moment, only English.
I added a dbus rule which may represent a security lack. I ask those who have more knowledge of dbus to give advice on.
suggestions are appreciated
Comment by: max.bra on Mon, 16 Nov 2009 21:43:13 +0000
However I do not think it's worth to be used on arch.
Dropping
Comment by: piezoelectric on Tue, 17 Nov 2009 01:52:06 +0000
It's a nice utility for multi-user environments. Especially those with inexperienced users.
First Submitted: Tue, 20 Oct 2009 20:30:35 +0000
indicator-applet 0.2.0-2 : A small applet to display information from various applications consistently in the panel. (Canonical Ayatana Project)
( Unsupported package: Potentally dangerous ! )
==> Edit the PKGBUILD (highly recommended for security reasons) ? [Y/n]("A" to abort)
==> ----------------------------------------------
==>n
==> indicator-applet dependencies:
- gconf (already installed)
- gnome-panel (already installed)
- indicator-messages (building from AUR)
- indicator-session (building from AUR)
==> WARNING: This PKGBUILD contains install file that can be dangerous.
indicator-applet.install
==> Edit indicator-applet.install (highly recommended for security reasons) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>n
==> Continue the building of indicator-applet ? [Y/n]
==> ----------------------------------------------
==>y
==> Building missing dependencies from AUR:
==> Resuming previous build
==> Downloading indicator-messages PKGBUILD from AUR...
tar: Record size = 15 blocks
First Submitted: Mon, 16 Nov 2009 20:51:33 +0000
indicator-messages 0.2.6-1 : A place on the user's desktop that collects messages that need a response. (Canonical Ayatana Project)
( Unsupported package: Potentally dangerous ! )
==> Edit the PKGBUILD (highly recommended for security reasons) ? [Y/n]("A" to abort)
==> ----------------------------------------------
==>n
==> indicator-messages dependencies:
- libindicate (building from AUR)
- libdbusmenu (building from AUR)
- libindicator (building from AUR)
==> WARNING: This PKGBUILD contains install file that can be dangerous.
indicator-messages.install
==> Edit indicator-messages.install (highly recommended for security reasons) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>n
==> Continue the building of indicator-messages ? [Y/n]
==> ----------------------------------------------
==>y
==> Building missing dependencies from AUR:
==> Resuming previous build
==> Downloading libindicate PKGBUILD from AUR...
tar: Record size = 6 blocks
First Submitted: Mon, 16 Nov 2009 20:50:29 +0000
libindicate 0.2.3-1 : A small library for applications to raise \"flags\" on DBus for other components of the desktop to pick up and visualize. (Canonical Ayatana Project)
( Unsupported package: Potentally dangerous ! )
==> Edit the PKGBUILD (highly recommended for security reasons) ? [Y/n]("A" to abort)
==> ----------------------------------------------
==>n
==> libindicate dependencies:
- glib2 (already installed)
- gtk2 (already installed)
- dbus-glib (already installed)
- libxml2 (already installed)
==> Continue the building of libindicate ? [Y/n]
==> ----------------------------------------------
==>y
==> Install or build missing dependencies for libindicate:
==> Building and installing package
==> libindicate dependencies:
- glib2 (already installed)
- gtk2 (already installed)
- dbus-glib (already installed)
- libxml2 (already installed)
==> Making package: libindicate 0.2.3-1 x86_64 (Mon Nov 30 21:22:18 GMT 2009)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found libindicate-0.2.3.tar.gz in build dir
==> Validating source files with md5sums...
libindicate-0.2.3.tar.gz ... Passed
==> Extracting Sources...
-> Extracting libindicate-0.2.3.tar.gz with bsdtar
==> Removing existing pkg/ directory...
==> Entering fakeroot environment...
==> Starting build()...
/tmp/yaourt-tmp-mark/aur-libindicate/libindicate/./PKGBUILD: ./configure: /bin/sh: bad interpreter: Permission denied
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build libindicate package.
==> Install or build missing dependencies for indicator-messages:
==> Install or build missing dependencies for indicator-applet:
[mark@markspc ~]$
this is the most important bit
==> Starting build()...
/tmp/yaourt-tmp-mark/aur-libindicate/libindicate/./PKGBUILD: ./configure: /bin/sh: bad interpreter: Permission denied
any reason why this is happening?
thanks markp1989markp1989 wrote:==> Starting build()...
/tmp/yaourt-tmp-mark/aur-libindicate/libindicate/./PKGBUILD: ./configure: /bin/sh: bad interpreter: Permission denied
What are your /tmp permissions?
Also, is your /tmp on a separate partition? If so, what is the fstab entry for it?
Last edited by tdy (2009-11-30 22:47:23) -
Build error :package com.sun.javadoc does not exist
Question from a Turing machine expert who is new to Java.
Trying to run a sample program from Richardson's book "Java JDK 5 Edition" Chapter 1.
In Netbeans 5.5 receive build error :package com.sun.javadoc does not exist
for "import com.sun.javadoc.*;"
Believe missing classes are in tools.jar in C:\Sun\SDKee5SDK\jdk\lib
How do I define this to Netbeans and/or JDK?
Using java_ee_sdk-5_01
and netbeans-5_5-windows downloads.
Platform is XP.
Netbeans has been updated to date.
Appreciate.sony_tj wrote:
D:\Xyz.java:22: package com.sun.javadoc does not exist
import com.sun.javadoc.*;After getting this error, I have set my classpath to C:\Program Files\Java\jdk1.5.0_03\lib\tools.jar. But still the error persists. Could anyone please tell me how do I solve this problem.You have failed in setting your classpath in that case. -
Hi All. Could anyone resolve my issue.
I was created a package with an Script task written in VB.Net.
The Package was executing Successfully in BIDS.
But when i tried to exceute the same using Sql server Agent Job, Its getting Failed with the below error message
"Executed as user: Admin. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 5:12:27 PM Error: 2013-03-13 17:12:32.33
Code: 0x00000005 Source: Checking Alcon Files Checking Alcon Files Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.
End Error Error: 2013-03-13 17:12:32.33 Code: 0x00000005 Source: Checking Alcon Files Checking Alcon Files Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict
in class 'ScriptMain'., ScriptMain.vb, 156, 22 End Error Error: 2013-03-13 17:12:32.36 Code: 0x00000005 Source: Checking Alcon Files Checking Alcon Files Description: The binary
code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:34.28 Code: 0x00000005
Source: Formating Excel Sheet Formating Excel Sheet Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors. End Error Error: 2013-03-13 17:12:34.28
Code: 0x00000005 Source: Formating Excel Sheet Formating Excel Sheet Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict in class 'ScriptMain'., ScriptMain.vb, 191, 22 End Error
Error: 2013-03-13 17:12:34.29 Code: 0x00000005 Source: Formating Excel Sheet Formating Excel Sheet Description: The binary code for the script is not found. Please open the script in the
designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56 Code: 0x00000004 Source: Checking Alcon Files Description:
The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56 Code: 0xC0024107
Source: Checking Alcon Files Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 5:12:27 PM Finished: 5:12:51 PM
Elapsed: 24.336 seconds. The package execution failed. The step failed."
Please give some solution to this.
Thanks in advanceAre you editing this job in SQL 2012? Is it wrapping your paths in \"? Like for example does the command line tab on the step look like this:
/FILE "\"D:\yourPathGoesHere.dtsx\"" /CONFIGFILE "\"D:\yourPathGoesHere.dtsConfig\"" /CHECKPOINTING OFF /REPORTING E
That's the problem I had, and I resolved it by recreating the whole thing via SQL Script and getting rid of all those \" things. I think that is preventing SSIS from looking up the precompiled binaries for your Script Task. So you should edit the command
line manually:
/FILE "D:\yourPathGoesHere.dtsx" /CONFIGFILE "D:\yourPathGoesHere.dtsConfig" /CHECKPOINTING OFF /REPORTING E
Please write back whether that helps you. David Dye's answer didn't help me at all. -
Getconf returns compiler flags that the compiler warns about
I have Workshop 12u1 installed on my Solaris 10u8 machine (x86_64). I'm up to date with patches as of a couple weeks ago.
I'm well aware that the Workshop suite has deprecated flags like -xarch=generic64, -xarch=amd64a, etc.
However, when I run "getconf" on my Solaris 10 system, some of the conf settings still return those older flags that the compiler now warns about. That causes a lot of warning chatter when building certain applications (e.g. perl 5.10.1) that are smart enough to use "getconf" to try determine what flags to use in certain situations. Using getconf to find the right flags is even mentioned in the standards(5) page, but following its advice results in deprecation warnings from the compiler. Not good.
If you run the following code you'll see what I mean:
for f in `man getconf | egrep 'XBS'`; do echo "Checking $f"; getconf "$f"; doneIs this something that I (as a sysadmin for the system) should be able to configure, or is it something that would need to be patched to fix? The man pages for getconf, sysconf, and confstr aren't clear where the values are actually coming from.
So, how should this be fixed?
Thanks,
TimEnchanter wrote:
Since I'm running regular old Solaris 10, rather than OpenSolaris, I'm skeptical how much help the OpenSolaris developers are truly going to be. I can certainly give it a go, but even if they fix it in OpenSolaris, it might be a very long time before that fix filters into Solaris.Actually, it goes the other way. New features and modification go into the internal Solaris development workspace before they migrate to Open Solaris. The Solaris Express and final releases and Open Solaris releases come from the same source base. Whether a feature or update goes into a Solaris 10 patch depends partly on demand, especially demand from customers with service contracts.
I'm also a little puzzled about the "backwards compatibility" thinking of the compiler developers. In some areas (e.g. C++ and the standard library), what's shipped with the compiler is years and years behind what's current, apparently in the name of "backward compatibility". Yet where compiler flags are concerned, the developers seem to be much more cavalier about deprecating things and making changes that break backward compatibility.We try very hard not to break code or makefiles. Sun (and now Oracle) makes its money from enterprise users. Their code bases last for a long time, and changes are expensive. Changing a line in a makefile or source code file can mean having to re-certify the application.
The change from -xarch to -m specifying the memory model was more abrupt than we would have liked, and in hindsight, was probably not handled very well. We were running into combinatorial explosion of -xarch sub-options due to the increasing number of architectures that the compiler supports. Some option combinations quietly resulted in behavior that you didn't expect. (For example, the combination "*-fast -xarch=v9*"did not give the same result as "*-xarch=v9 -fast*".) Separating memory model from the other considerations made the options easier and more reliable to use.
Don't get me wrong -- I'm all for forward progress with the tool-chain -- I think that the C++ standard library and the defaults should all be brought up to what's current in the industry. Sun Studio 12 update 1 has direct support for Apache stdcxx (if installed in a standard location) in addition to libCstd and STLport. The Apache library will be in the next Open Solaris. When it will be available in a Solaris 10 update has not yet been decided.
I also think adding support for -m32/-m64 was a good move. It just seems to me that if the developers are going to deprecate a large number of flags that the compiler accepts, they should also make certain that the rest of the operating system can handle that change. To me, that means that they need to work with the developers of getconf/confstr() to make certain it knows how to check the compiler version before it emits a particular flag.Only a few options have been deprecated. It's just that they are probably the ones you used most. :-(
More than one compiler version can be installed on a system, and compilers can be installed anywhere. Programmers in medium to large shops typically run compilers installed on a remote server, although they might have other compilers installed locally. If getconf had to guess what compiler you were using, it would often guess wrong. If you have suggestions on how to match up getconf behavior with the compiler you want to use, please post them in an Open Solaris forum. -
Can't build the package: ideviceinstaller-git 20120913-1
Hello,
I'm trying to build the package ideviceinstaller-git 20120913-1 but I get the following error:
patching file src/ideviceinstaller.c
Hunk #1 FAILED at 698.
1 out of 1 hunk FAILED -- saving rejects to file src/ideviceinstaller.c.rej
==> ERROR: A failure occurred in build().
Aborting...
there is a similar error reported in the comments of the package in the AUR but it should be solved.
I'm using a fresh installed archlinux with all the packages up-to-date
any idea?That's the danger of using patches with vcs pkgbuilds. The code has changed so the patch is no longer valid. The maintainer will need to update the patch.
-
Compile flag for the endian neutral conversion on x86_x64 systems
I am struggling to work on the endianess issue porting the driver and application codes from Sparc to x64 system. The device driver just copies the data in and out the structure from the kernel space to user space or from the user space to kernel space calling ddi_copyin and ddi_copyout in most time. The application ported from Sparc has to be handle the endianess issue.
For instance, the driver returns the data in the structure
typedef struct {
ushort robot_address; /* medium transport element address */
ushort robot_count; /* number medium transport elements */
ushort cell_address; /* medium storage element address */
ushort cell_count; /* number medium storage elements */
ushort port_address; /* import-export element address */
ushort port_count; /* number import-export elements */
ushort drive_address; /* data transfer element address */
ushort drive_count; /* number data transfer elements */
} element_info_t;
Byte _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 A B C D E F
00 01 00 01 10 00 00 17 00 10 00 01 01 00 00 02
First Robot Address ........... 256
Number of Robots .............. 256
First Cell Address ............ 16
Number of Storage Cells ....... 5888
First Import/Export Address ... 4096
Number of Import/Exports ...... 256
First Drive Address ........... 1
Number of Drives .............. 512
The correct value for First Robot Address should be 1 in Byte[0]->Byte[1], but the value is read to 256 in Byte[1]->Byte[0] since of the little endian. To get the correct value, I have to create a micro to convert the data, but it will take a lot of time to add the micro in the codes with 20k lines.
Is any compile flag applied to convert the little endian to big endian to save my life for the porting?
I am using Sun Studio 11 with Sun C 5.8 Patch 121016-02 2006/03/31.
Thanks for your help!There is no compiler option to control endianness of programs. I don't offhand see how such an option could work, because some data will always be in the machine's native endianness.
But there is a standard Unix toolset "xdr" that allows you to send data across an interface between different architectures, while preserving the data values. Each system knows its native data format. The sender marshalls the data stream into the interface format, and the receiver unmarshalls the stream into its own format.
("Every problem in computer science can be solved by adding a level of indirection.")
Run "man xdr" as a place to start. -
Table_From_Block Build-in Package is not working in Oracle 10G
Hi
Table_From_Block Build-in Package is not working in Oracle 10G
Kindly advice..user648759 wrote:
Hi
Table_From_Block Build-in Package is not working in Oracle 10G
Kindly advice..Provide a little more information. Forms version OS version, more information about your problem and question.
--and explain what on earth Table_From_Block* mean's--
Tony
PS: TABLE_FORM_BLOCK is a built-in for internal use, usually auto generated by forms. For a moment I didn't get what that meant, need more coffee.
Edited by: Tony Garabedian on Aug 29, 2008 12:39 PM -
Library Projects compiled using Flash Builder and ANT have different outputs
Hi Guys.,
I am really having hard time to get something work right with RSL projects in Flex 3.2 SDK. Here is my weird problem.
I have a library projects which has the following settings in Flash Builder
Link Type : External
airglobal.swc
framework.swc
datavisualization.swc
rpc.swc
utilites.swc
applicationupdater.swc
applicationupdater_ui.swc
Link Type: Merged into code
airframework.swc
servicemonitor.swc
Compiler settings
-directory=true -output=../../lib/core -debug=true -optimize=false -define+=CONFIG::bindingdebug,false -define+=CONFIG::frameworkdebug,false -define+=CONFIG::flexspy,true -define+=CONFIG::debug,true -define+=CONFIG::release,false -define+=CONFIG::logtoconsole,false -allow-source-path-overlap=true -keep-as3-metadata+=Metadata,DefaultProperty,Required,Event,AssignableTo,Inject,InjectCon structor,Publish,Subscribe,PublishSubscribe,Factory,Init,Destroy,Observe,AsyncInit,Managed Events,MessageDispatcher,MessageHandler,MessageBinding,MessageInterceptor,MessageError,Com mand,CommandComplete,CommandResult,CommandError,CommandStatus,ResourceBinding,Selector,Tar get,Autoremove,Internal,ObjectDefinition,DynamicObject
When I compile my library projects I get a MyLibraryproject.swc. The SWC has the following files in it
mx/controls/HTML.png
mx/core/Windows.png
library.swf
Note: airframework.swc and servicemonitor.swc has a many png files and properties files in it. But these properties and png files are not included when compiled in Flash builder.
But when the same project is compiled using ANT compc task, i get all the png and properties files from airframework.swc and servicemonitor.swc files into my library project SWC file.
Here is the ANT version which is used to compile the library project
<compc output="${project.output.dir}/${project.name}.swc"
include-classes="${as} ${mxml}"
use-network="false"
directory="false"
allow-source-path-overlap="true"
incremental="${build.incremental}"
debug="${build.debug}"
locale="${build.locale}"
optimize="false"
>
<define name="CONFIG::bindingdebug" value="${build.bindingdebug}" />
<define name="CONFIG::logtoconsole" value="${build.logtoconsole}" />
<define name="CONFIG::frameworkdebug" value="${build.frameworkdebug}" />
<define name="CONFIG::flexspy" value="${build.flexspy}" />
<define name="CONFIG::debug" value="${build.debug}" />
<define name="CONFIG::release" value="${build.release}" />
<keep-as3-metadata name="Metadata" />
<keep-as3-metadata name="DefaultProperty" />
<keep-as3-metadata name="Required" />
<keep-as3-metadata name="Event" />
<keep-as3-metadata name="AssignableTo" />
<keep-as3-metadata name="Inject" />
<keep-as3-metadata name="InjectConstructor" />
<keep-as3-metadata name="Publish" />
<keep-as3-metadata name="Subscribe" />
<keep-as3-metadata name="PublishSubscribe" />
<keep-as3-metadata name="Factory" />
<keep-as3-metadata name="Init" />
<keep-as3-metadata name="Destroy" />
<keep-as3-metadata name="Observe" />
<keep-as3-metadata name="AsyncInit" />
<keep-as3-metadata name="ManagedEvents" />
<keep-as3-metadata name="MessageDispatcher" />
<keep-as3-metadata name="MessageHandler" />
<keep-as3-metadata name="MessageBinding" />
<keep-as3-metadata name="MessageInterceptor" />
<keep-as3-metadata name="MessageError" />
<keep-as3-metadata name="Command" />
<keep-as3-metadata name="CommandComplete" />
<keep-as3-metadata name="CommandResult" />
<keep-as3-metadata name="CommandError" />
<keep-as3-metadata name="CommandStatus" />
<keep-as3-metadata name="ResourceBinding" />
<keep-as3-metadata name="Selector" />
<keep-as3-metadata name="Target" />
<keep-as3-metadata name="Autoremove" />
<keep-as3-metadata name="Internal" />
<keep-as3-metadata name="ObjectDefinition" />
<keep-as3-metadata name="DynamicObject" />
<load-config filename="${air.config}"/>
<compiler.include-libraries dir="${flex.frameworks.dir}/libs/air" append="true">
<include name="servicemonitor.swc" />
<include name="airframework.swc" />
</compiler.include-libraries>
<external-library-path dir="${build.compc.dir}" append="true">
<include name="TriGeoFlexFramework/TriGeoFlexFramework.swc" />
<include name="TriGeoLibrary/TriGeoLibrary.swc" />
<include name="TriGeoRPCFramework/TriGeoRPCFramework.swc" />
<include name="Degrafa_Beta3.1_Flex3" />
<include name="parsley-flex3-2.4.0.swc" />
<include name="spicelib-flex-2.4.0.swc" />
</external-library-path>
<external-library-path dir="${flex.frameworks.dir}/libs" append="true">
<include name="framework.swc" />
<include name="datavisualization.swc" />
<include name="utilities.swc" />
<include name="rpc.swc" />
<include name="air/airglobal.swc" />
<include name="air/applicationupdater.swc" />
<include name="air/applicationupdater_ui.swc" />
</external-library-path>
<source-path path-element="${basedir}/src" />
</compc>
</target>
</project>
Any insights is greatly appreciated.!#1, If it compiles then you have no issue. There's no reason at this point not to use 4.6. You should bundle a captive runtime to assure the users computer won't need to have AIR installed at all.
#2, Papervision is old. Use the Stage3D and/or a wrapper framework. As far as the generic "If I download lots of data will it take the user more time to load it", well, of course. Just don't make the loading experience painful. Entertain them while they way or find ways of displaying data sooner than later. If it's desirable on the web has more to do with the context of the app and the device displaying it. In other words, a phone user would find it easy but obviously not a desktop user.
#3, Definitely referring you to Google on that one.
#4, Size always matters, it's common sense. The more you process the harder it is. While I haven't done AR I've used the Microsoft Kinect SDK and ANE and tracking was extremely fast but limited. From what I've seen and your basic built in location and direction hardware on any mobile device you shouldn't have much trouble. Depends on what you're doing.
#5, This discussion would be way too large for a forum. You'd need to consult a firm experienced in AR development.
#6, "Applications using the commercial license do not have to provide source code, but must pay a licensing fee. Contact ARToolworks at [email protected] for more information." They will base your price on your product, there is no single price.
#7, The models could be huge and elaborate or tiny and simple which changes the answer. Consult the answer in #4. Ultimately most people are getting on fast networks with mobile and excessively fast on desktop/wifi. Size matters a lot less than 3 years ago.
#8, Depends on what you're doing. You have to explain it. -
How can I compile all functions, procedures and packages with a script?
I need to compile all functions, procedures and packages of 5 schemas (users) with a script.
How can I do it?
Thanks!you can create a script to select all invalid objects in those schemas Since Oracle 8 introduced NDS this approach has struck me as a trifle old fashioned. It's much simpler to loop round the query in PL/SQL and use EXECUTE IMMEDIATE to fire off the DDL statements. No scripts, no muss, no fuss.
Having said that, the problem with this approach and also with using DBMS_UTILITY.COMPILE_SCHEMA is that they do not compile all the invalid objects in dependency order. This may result in programs being invalidated by the subsequent compilation of dependencies. This is due to the introduction of Java into the database.
The UTLRP script is much better, because it (usually) avoids cyclic references. But you still may need to run it more than once.
In general it is better to avoid sledgehammer recompilations (like DBMS_UTILITY.COMPILE_SCHEMA, which starts by invalidating all the objects). If we have twenty invalid objects, nineteen of which are dependencies of the twentieth, we actually only need to recompile the master object, as recompiling it will trigger the recompilation of all the others.
Cheers, APC -
How to build distribution package with Agilent VISA as primary
Hi everybody,
I build a distribution package under LW 8.0 in a PC(Agilent VISA is primary), then I install the distribution package in another PC.
But I found the distribution package install NI VISA as primary in another PC. So How could I make Agilent VISA as primary when I build Distribution Package?
Does anyone can help me?TaoZ,
Does your application use both NI-VISA and Agilent VISA? NI-VISA is only functional as the primary VISA, so if you need to use both NI-VISA and Agilent VISA, Agilent VISA will need to be secondary. If you are using just Agilent VISA, then you should not need to install NI-VISA. If you already have NI-VISA installed on the system, then typically Agilent VISA will overwrite NI-VISA because they use higher version numbers than us, but this is not necessarily always the case. Which version of each driver are you working with?
National Instruments
Product Support Engineer
Maybe you are looking for
-
Daisy Chain 2 cinema displays to thunderbolt port on iMac?
Presently I have an iMac (mid 2011). I am running 2 cinema displays thru my 2 thunderbolt ports on my iMac. Is it possible to daisy chain these 2 additional displays to save a thunderbolt port? If so, how would be greatly appreciated.
-
My macbook won't open firefox pdf files
About a week ago, my macbook quit opening internet pdf files. I checked for new software updates but it hasen't worked. Please help!!! No error message shows up, just a blank screen.
-
My CS6 installation key isn't recognised when I want to re-install, what should I do?
I occasionally use CS6 Design & Web Premium. I've had problems logging on so I uninstalled on my two computers, and tried to re-install. Each time I try, I'm told the key is not recognized. What can I do?
-
hello how can i open multiple pdf files in one window? thanks for your answer
-
Art student wanting to do stop motion video or a moving image film
Hi I'm very new at this but am interested in Stop Motion or at least moving illustrative work. I'm a masters art student and have been put down as a 'video art' discipline. I have always been interested in the work by William Kentridge who illustrate