Compiles a procedure with syntax error

In the script tab, try to compile a procedure with syntax errors.
The message displays procedure compiled !!!
It should display that procedure compiled with errors.

Hi Kris,
I searched through the threads, but did not come across a similar question and that is why i raised the query. It'll be helpful if you could answer the query.
regards,

Similar Messages

  • Trying to execute a stored procedure gives: Syntax error or access violatio

    Hi,
    I have a stored procedure that runs fine in sqplus:
    EXEC load_image('distribuido.JPG', '1');
    When i try to execute it in PHP it gives me this error:
    [Oracle][ODBC]Syntax error or access violation.
    In php i'm using ODBC functions, with the same user configured in dsn. The sql i run in php is 100% equal...
    What's the problem and how should i run this procedure in php (or maybe grant more privileges to this user??)
    The procedure is:
    CREATE OR REPLACE PROCEDURE load_image( filename VARCHAR2, vid_membro INTEGER )
    AS
    file_lob BFILE;
    binary_lob BLOB;
    mime_type fotografia.foto_tipo%type;
    extension_pos NUMBER;
    BEGIN
    extension_pos := INSTR( filename, '.' );
    mime_type := 'image/' || SUBSTR( filename,
    extension_pos + 1,
    LENGTH( filename ) );
    INSERT INTO fotografia (id_foto, id_cat, id_membro, nota_media, num_votos, foto_tipo, fotografia)
    VALUES (fotografias_id.nextval, 1, vid_membro, 0, 0, mime_type, empty_blob())
    RETURNING fotografia INTO binary_lob;
    file_lob := BFILENAME( 'IMAGES', filename );
    dbms_lob.fileOpen ( file_lob, dbms_lob.file_readOnly );
    dbms_lob.loadFromFile( binary_lob,
    file_lob,
    dbms_lob.getLength( file_lob ) );
    dbms_lob.fileClose ( file_lob );
    END;
    /

    'exec' is an sqlplus directive. If you run this query in PHP, try:
    $query = "BEGIN
    load_image('distribuido.JPG', '1');
    END;";
    (you may have to remove the ; after 'END')

  • Reporting off oracle stored procedure with parameters error

    Erorr message: Error in File xxx.rpt: Failed to retrieve data from the database. Details: [Database Vendor Code: 907 ]
    Asp.net 2.0 web application.
    CR XI R2 sp2 in BOE XI R2 sp2 on Solaris 10.
    Database: Oracle 10g on Solaris 10. Oracle stored procedure defined in package.
    Happens with reports reporting off stored procedure with parameters.
    The sp is used in the crystal report.
    The web application passes parameters to crystal report, which then passes the parameters to stored procedure.
    Encountered error if:
    r.PromptOnDemandViewing = false;
    r.UseOriginalDataSource = false;
    r.CustomServerType = CeReportServerType.ceServerTypeOracle;
    Report can retrieves data if:
    r.PromptOnDemandViewing = false;
    r.UseOriginalDataSource = true;
    r.CustomServerType = CeReportServerType.ceServerTypeOracle;
    In addition
    The steps are:
    1)     Create oracle package and stored proc.
    2)     In CR Designer, select the stored proc as datasource.
    3)     The parameters names were "generated" by the CR Designer.
    4)     Rename the parameter names.
    5)     Drag the fields onto report.
    We noticed the following with different setting of database logon info:
    When previewing from BOE, get error when "Use custom database logon information specified here"
    However, no error when "Use original database logon information from the report". 
    Am i missing something?

    Please re-post if this is still an issue to the Data Connectivity - Crystal Reports Forum or purchase a case and have a dedicated support engineer work with you directly

  • Running SQL Procedure with dg4msql errors: Function sequence error HY010

    I am trying to execute a stored procedure on a SQL database and get the error Function sequence error HY010.
    A simple query on a table returns teh expected result.
    I have a single Win2008R2 server with MSSQL Express 2008 and Oracle 11gR2 (32bit not 64bit version of Oracle)
    Below is the gateway init, listener and tnsnames files and the query I am trying to run:
    -- initORIONWASP.ora --
    HS_FDS_CONNECT_INFO=INGRDB//waspForGIS
    HS_FDS_TRACE_LEVEL=OFF
    HS_FDS_RECOVERY_ACCOUNT=RECOVER
    HS_FDS_RECOVERY_PWD=RECOVER
    HS_CALL_NAME=dbo.spTest;dbo.spQueryAsset;dbo.spQueryAssetDetails
    HS_FDS_PROC_IS_FUNC=TRUE
    HS_FDS_RESULTSET_SUPPORT=TRUE
    -- Listener.ora -- (partial)
    (SID_DESC =
    (SID_NAME = ORIONWASP)
    (ORACLE_HOME = C:\Oracle\product\11.2.0\dbhome_1)
    (PROGRAM=dg4msql)
    -- tnsnames.ora -- (partial)
    ORIONWASP =
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=INGRDB)(PORT=1521))
    (CONNECT_DATA=(SID=ORIONWASP))
    (HS=OK)
    -- Simple Query --
    Running select "Asset_ID" from asset@ORIONWASP; returns the correct result
    Running select * from sys.procedures@ORIONWASP; returns a list of procedures including the procedure I want to run
    -- This pl/sql block returns the error ******* identifier 'spTest@ORIONWASP' must be declared *******
    declare
    begin
    "spTest"@ORIONWASP;
    end;
    -- This passthrough pl/sql block returns ******** [Oracle][ODBC SQL Server Driver]Function sequence error {HY010} ********
    DECLARE
    CRS BINARY_INTEGER;
    RET BINARY_INTEGER;
    v_COL1 VARCHAR2(50);
    v_COL2 VARCHAR2(50);
    BEGIN
    CRS := DBMS_HS_PASSTHROUGH.OPEN_CURSOR@ORIONWASP;
    DBMS_HS_PASSTHROUGH.PARSE@ORIONWASP(CRS, 'exec spTest');
    BEGIN
    RET := 0;
    WHILE (TRUE)
    LOOP
    ret := DBMS_HS_PASSTHROUGH.FETCH_ROW@ORIONWASP(CRS, FALSE);
    DBMS_HS_PASSTHROUGH.GET_VALUE@ORIONWASP(CRS, 1, v_COL1);
    DBMS_HS_PASSTHROUGH.GET_VALUE@ORIONWASP(CRS, 2, v_COL2);
    DBMS_OUTPUT.PUT_Line('Col1:'||v_COL1||' Col2:'||v_COL2);
    END LOOP;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    BEGIN
    DBMS_OUTPUT.PUT_LINE('End of Fetch');
    DBMS_HS_PASSTHROUGH.CLOSE_CURSOR@ORIONWASP(CRS);
    END;
    END;
    END;
    /

    The gateway configuration file contains:
    HS_FDS_PROC_IS_FUNC=TRUE
    HS_FDS_RESULTSET_SUPPORT=TRUE
    This setting commonly causes problems and you need to set
    HS_FDS_PROC_IS_FUNC=TRUE
    HS_FDS_RESULTSET_SUPPORT=FALSE
    for normal procedure calls and
    HS_FDS_PROC_IS_FUNC=FALSE
    HS_FDS_RESULTSET_SUPPORT=TRUE
    when calling the procedure with ref cursors.
    There's a note in My Oracle Support that gives you examples how to call remote SQl Server procedures
         Note.197192.1 Different Methods How To Call MS SQL Server Procedures Using TG4MSQL - DG4MSQL
    and another one for the Sybase gateway but this code is similar for the SQL Server:
    Article-ID: Note 351400.1
    Title: How to Call a Remote Sybase Procedure Using TG4SYBS

  • Assistance with syntax error please

    this line of AS is giving me a syntax error and I cannot
    figure out the reason, requesting assistance please
    var mclListener.onLoadInit =
    function(target_mc:MovieClip):Void {
    target_mc.setMask(mask_mc);
    TIA

    thanks that resolved my error, but the script isn't working
    as expected. I am practicing from a book with AS 2.0 tutorials and
    this code is supposed to produce a mask from a movie clip over an
    image, but doesn't for me.
    I create a square on frame 1, make it a movie clip with the
    instance name of mask_mc and add this AS to frame 1.
    System.security.allowDomain.allowDomain("
    http://www.helpexamples.com");
    this.createEmptyMovieClip("img_mc", 10);
    mclListener.onLoadInit = function(target_mc:MovieClip):Void {
    target_mc.setMask(mask_mc);
    var my_mcl:MovieClipLoader = new MovieClipLoader();
    my_mcl .addListener(mclListener);
    my_mcl .loadClip("
    http://www.helpexamples.com/flash/images/image1.jpg",
    img_mc);
    my external jpg isn't getting masked by the MC....any
    ideas?

  • ICR: program FBICRC_GENERATE_CUST with syntax error

    Hi,
    in our Development system, the auto config program for ICR "FBICRC_GENERATE_CUST" is not working due to syntax error. It works in testsystem and productive system but not in development.
    Anyone experienced the same issue i.e. short dump when running FBICRC_GENERATE_CUST ?
    The following syntax error occurred in program "FBICRC_GENERATE_CUST " in
    include "FBICRC_GENERATE_CUST_F03 " in
    line 51:
    "The data object "LS_FBICRC01000" does not have a component called "HID"
    "E_DCURR"."
    Error analysis
        The following syntax error was found in the program FBICRC_GENERATE_CUST :
        "The data object "LS_FBICRC01000" does not have a component called "HID"
        "E_DCURR"."
    Thanks
    Stephane
    TRIUMPH ASIA

    HI  Eli,
    actually the problem only occurs after we implemented OSS note 1172591 with the SAP delievered transport P3EK049760
    So before having this transport: FBICRC_GENERATE_CUST  works fine
    AFTER the transport P3EK049760 contained in OSS note 1172591  -> syntax error.
    The field "hide_dcurr" is missing in table FBICRC01000
    Cheers
    Stephane

  • Xinitrc comes up with syntax error

    I was trying this setup for an xinitrc file:
    DEFAULT_SESSION=awesome
    case $1 in
    kde) exec startkde;;
    xfce4) exec startxfce4;;
    wmaker) exec wmaker;;
    blackbox) exec blackbox;;
    awesome) exec awesome;;
    openbox) exec openbox;;
    musca) exec musca;;
    wmii) exec wmii;;
    enlightenment) exec e16;;
    ratpoison) exec ratpoison;;
    etoile) exec etoile;;
    compiz) exec compiz;;
    ) exec $DEFAULT_SESSION
    *) exec $1;;
    esac
    Seems like it should work right? Well I guess Bash doesn't like the null case, and throws it out as a syntax error. Anyone know of a way around this?
    The reason I wanted to do this is because sometimes I'll just want to add a WM to /etc/slim.conf just to test it out.

    http://tldp.org/LDP/Bash-Beginners-Guid … 07_03.html
    Each case is an expression matching a pattern. The commands in the COMMAND-LIST for the first match are executed. The "|" symbol is used for separating multiple patterns, and the ")" operator terminates a pattern list. Each case plus its according commands are called a clause. Each clause must be terminated with ";;". Each case statement is ended with the esac statement.

  • StartupItem with syntax error (sh script)

    I'm comfy on the cli but still green with scripting it. I've followed the Apple tut on making a StartupItem, but I am getting simple (I hope) sh syntax errors when I run it. The three *Service functions are required, as they're called by the RunService function (from the sourced rc.common script) ... all per the Apple tutorial.
    In any case, the error I get is:
    line 7: syntax error near unexpected token `}'
    /Library/StartupItems/blah/blah: line 7: `}'
    The complaint is about the bracing earlier in execution than the 'tricky' stuff. I hope that suggests the problem is here and not in my Boot.bash script. I'll post that too if, as I'm noticing with scripting, the complaints about eofs and bracing and such are not where the real problem lies. I'm a bash person though so, especially if this is just an sh syntax misuse, feel free to give me what for.
    Any thoughts, fixes, or straight advice appreciated,
    Joel
    #!/bin/sh
    . /etc/rc.common
    StopService() {
    # nothing to kill
    RestartService() {
    StopService
    StartService
    StartService() {
    /bin/bash /Library/Management/Boot.bash
    RunService "$1"

    Hi Joel,
       I've actually read a scripting guide that recommends defining functions with the "function" keyword and the norm is to put a space before and after the "()". However, your syntax is valid. In fact I see no errors at all; the script should work.
       Thus, the problem is most likely something invisible. It's time to investigate the text editor you used to create the script. You should open the script in a UNIX text editor, like vim, and look for hidden characters or Mac line endings. An even better solution might be to get the free text editor TextWrangler, (or BBEdit if you have it) open the file and set it to show invisible characters. It will also tell you what kind of line endings are used in the file. You might also post a long listing of the StartupItem script.
    Gary
    ~~~~
       He's just a politician trying to save both his faces...

  • PROCEDURE WITH CURSOR ERROR

    I wanted to have a cursor in my procedure having results from different tables and different databases. I successfully created the query and compiled it using the procedure builder. However, when i was about to create it as stored procedure in iSQLplus, it displayed a warning. It says "Procedure created wuth compilation error." The first error is "PLS-00341: declaration of cursor 'SUBJ_CUR' is incomplete or malformed"
    Here's a piece of my code:
    PROCEDURE assess(STUD_ID VARCHAR2, STUD_YEAR NUMBER, STUD_TYPE CHAR) IS
    CURSOR subj_cur IS
    SELECT e.student_id, s.subject_id, s.subj_code, s.subject_title, s.units, s.pay_units,
    d.department_name, s.tuition_fee_type, s.lab_fee_type, f.year, f.amount
    FROM regist.enrol e, regist.offering o, regist.subject s,
    fee_details f, regist.student st, regist.department d
    WHERE (e.student_id = STUD_ID) AND (e.offering_id = o.offering_id) AND
    (o.subject_id = s.subject_id) AND (f.fee_no = s.tuition_fee_type) AND
    (st.student_id=e.student_id) AND ((f.year = STUD_YEAR) OR (f.year=0)) AND
    (s.department_id = d.department_id);
    regist and system are databases.
    Can anyone tell me where did I go wrong?
    I resorted though in creating views, however I still received an error. It says, "Insufficient privileges"
    Help me please..... I really need it badly..

    First of all, I've no experience with iSQLplus. I'm just wondering in which database the table fee_details is: system or regist? You didn't prefix the table.

  • [Solve]Compile Ada code with integer_IO ,error integer.ads not found.

    Hello all again.
    I do some programming in Ada and i am very fascinated this language.
    I got problem when using integer_IO in my code.
    When it compiling I got strange error integer.ads not found.
    BTW.My compiler is GNAT 4.4.1.
    Thanks for help.
    Last edited by SpeedVin (2010-03-01 17:30:56)

    drcouzelis wrote:
    I also think Ada is fascinating. I wrote a small video game in Ada and I use Ada a little at work.
    "integer_IO" and "Integer_IO" doesn't matter, because Ada is case insensitive.
    I'm not home right now, but I think "Integer_IO" is a subpackage of "Text_IO":
    with Ada.Text_IO.Integer_IO;
    If you want, you can post your code and I'll see if I can compile it.
    Are you an Ada beginner? Even though I have been working with Ada for more than a year now, I still don't think I'm very good at it. I wish there was more documentation and more projects used Ada.
    Yes I'm new  into this language.
    I really won to that there will be more project's/program's written in ADA.
    This is my program code:
    With Text_IO;
    Use Text_IO;
    With Ada.Text_IO.Integer_IO;
    procedure file is
    Age :integer range 0..100;
    begin
    if Age < 18 then
    put_line("BABY!!!");
    else
    put_line("OLD MAN!!!");
    end if;
    end;
    When I try to compile it I get error:
    file.adb:3:17: "Integer_IO" is a nested package, not a compilation unit

  • Cannot change password on LPM page with syntax error / AD2008

    Hi,
    In the Lost password Management page, user are prompt to change the password by input the old and new password.
    Identity/oblix/apps/lost_pwd_mgmt/bin/lost_pwd_mgmt.cgi?
    After type in the new password and click save the following error shows:
    "The Directory Server password syntax was violated. The password cannot be changed"
    Using AD2008 with ADSI security mode. OAM 10.1.4.3.0 BP03 on all components. Any idea on the above error?
    Appreciated for any feedback.
    Thanks

    Hi,
    The error message means that AD is not accepting the value for the new password. Usually that means that there is a password policy in AD itself (perhaps which requires 1 upper case letter, 2 non-alphanumeric characters etc) which is causing the value to be rejected. If that is the case, you could match OAM's password policy to be as close as possible to AD's (so that OAM can do the validation before sending it off to AD).
    Regards,
    Colin

  • Read table with syntax error

    I would like to have this in my report in ABAP 7:
              READ TABLE ti_prococolos WITH KEY
                                   protocol = lc_protocol
                                   status    = 'abc'
                                   status    = 'ced'.
    But I receive the following error, when verifying the syntax:
    Key field "STATUS" has been used more than once. This is not allowed .     
    How can I solve this?
    Thanks!

    The READ statement is used to read a specific row of the internal table, in this case it appears that you are saying that you want a record if the STATUS is either abc or def.  You can't do that with the READ.  You would need to use the LOOP.
    Loop at ti_prococolos where protocol = lc_protocal
                                        and ( status = 'abc' or status = 'ced' ).
    * do what ever here, and EXIT after since you only want one row.
    EXIT.
    endloop.
    Regards,
    RIch Heilman

  • SE01, SE09, SE10 throwing dumps with Syntax error

    We were applying some security notes in the SAP ECC6 Ehp1 system however, we forgot to implement a pre-requisite which was an external transport before implementing a note (in dev. we did it right but in test system, we forgot to do the external import first). Due to this, the RDDIMPDP job is getting cancelled every time & we get dumps whenever we use SE01 or SE09 or SE10.
    Pre-requisite note : 1497003
    Next note              : 1582138
    Could you please help resolving this issue ?
    Thank you !

    Hi,
    You can try with resetting note implementation in dev system which will generate one transport request. And move this transport request to test system as a result note will be reset in quality system as well.
    Then again implement note in dev and transport it to test system after implementing pre-requisite note.
    Thanks
    Sunny

  • Why after installing Ver 17 US English, pop up error boxes appear with Syntax Error for Java Script Application?

    Should I uninstall the Java application and related plug ins or go back to Ver 16 in which this problem did not occur?

    Thank you for leading me to the detailed method of checking extensions. The Social Fixer Extension needed to be updated. Mission accomplished.

  • Error building procedure with CTX_DDL.SYNC_INDEX

    I am getting the following error when I try to compile a procedure with a call to CTX_DDL.SYNC_INDEX:
    PLS-00201: identifier 'CTX_DDL' must be declared
    The public synonym for CTX_DDL exists and I can run ctx_ddl.sync_index from an anonymous block within SQL*PLUS. I also have other instances where the procedure will compile. The only real difference I can see between the 2 is the one where it will compile has the QUERY REWRITE privilege whereas the one where it will not compile does not. Is there some reason this privilege is required? Or is there something else I need to get this to compile?
    Thank you for any information.

    Hi,
    to see if some records are waiting to be indexed you can query the view CTX_USER_PENDING:
    select * from ctx_user_pending
    where pnd_index_name = 'NOTES_DETAIL4_INDX';If this gives rows, then you need to Synchronize the index. If it give no rows, then all the records are indexed.
    Herald ten Dam
    http://htendam.wordpress.com

Maybe you are looking for