SE01, SE09, SE10 throwing dumps with Syntax error

We were applying some security notes in the SAP ECC6 Ehp1 system however, we forgot to implement a pre-requisite which was an external transport before implementing a note (in dev. we did it right but in test system, we forgot to do the external import first). Due to this, the RDDIMPDP job is getting cancelled every time & we get dumps whenever we use SE01 or SE09 or SE10.
Pre-requisite note : 1497003
Next note              : 1582138
Could you please help resolving this issue ?
Thank you !

Hi,
You can try with resetting note implementation in dev system which will generate one transport request. And move this transport request to test system as a result note will be reset in quality system as well.
Then again implement note in dev and transport it to test system after implementing pre-requisite note.
Thanks
Sunny

Similar Messages

  • Short dump with an error SAPSQL_LIKE_QUOTES

    Hi,
    today we have more short dumps with an error SAPSQL_LIKE_QUOTES. this means The logical condition contains a text field literal, for which there is no closing quotation mark.
    as per my analysis i found the below code from the std. sap program SAPLBTCH in that include LBTCHF19.
    TRANSLATE p_buffer1 USING '*%'.
      IF p_buffer1 CO '% '.
        IF NOT i_mandatory IS INITIAL.
          CONCATENATE i_name '<> ''''' INTO o_where
            SEPARATED BY space.
        ENDIF.
        EXIT.
      ENDIF.
    can you please tell me that there is a sapce in the line IF p_buffer1 CO '% '.
    please advice me if this statement is true or should not contain any spaces between the quotations.
    Thanks,
    Kasi

    Hi Kasi,
    please check this link
    [SAPSQL_LIKE_QUOTES|http://www.google.com/#hl=en&num=100&q=SAPSQL_LIKE_QUOTES&fp=1&cad=b]
    Kind regards,
    Clemens

  • Determination dumps with assertion_failed error

    Hi gurus,
    I am enhancing a TM feature and my determination dumps with assertion_failed error. I check ST22 and the dump lies in method /BOBF/IF_FRW_CONFIGURATION~GET_CONTENT_KEY_MAPPING.
    Below is my determination to set the read-only flag.
    CREATE OBJECT lf_control
         EXPORTING
           IS_CONTEXT = IS_CTX    " Context Information for Determinations
           IO_MODIFY  = IO_MODIFY.   " Interface to Change Data
    lf_control->SET_ATTRIBUTE_READ_ONLY(
             EXPORTING
               IV_ATTRIBUTE_NAME = /SCMTMS/IF_TCC_TRNSP_CHRG_C=>SC_NODE_ATTRIBUTE-ITEMCHARGEELEMENT-RATE_AMOUNT
               IV_KEY                       = ls_chrg_el-key
               IV_VALUE                   = ABAP_TRUE
    Do you have any clues on this?
    Thanks,
    Clark

    Hi Clark,
    Few questions on the above code.
    Is this an standard determination you tried to enhance or a Custom determination you have created?
    The work around you can use is..to create a custom determination using the transaction bopf_ewb.
    Enhance that particular node & create a a property determination for that node in which the field which has to be done read-only.
    The above same code can be implemented to make it read-only.Instead of enhancing the standard, I would suggest you try this method to make the field read-only.
    Note: Please ensure that you that the determination is written for that particular node in which the field is present.
    Hope this helps you.
    Regards,
    Sanket.

  • Compiles a procedure with syntax error

    In the script tab, try to compile a procedure with syntax errors.
    The message displays procedure compiled !!!
    It should display that procedure compiled with errors.

    Hi Kris,
    I searched through the threads, but did not come across a similar question and that is why i raised the query. It'll be helpful if you could answer the query.
    regards,

  • DIFFERENCE BETWEEN SE01,SE09,SE10,STMS

    HI
    COULD ANYBODY TEL ME
    DIFFERENCE BETWEEN SE01,SE09,SE10,STMS TCODES

    check tcodes in SAP itself.U will come to know the diff.
    Regards
    Prabhu

  • Difference between se01,se09,se10

    any body knows the difference between se01,se09,se10 pse send to me

    hi check this..
    CTS Transaction Terminology
    Workbench Organizer (SE09) Correction and Transport System
    Customizing Organizer (SE10)
    Transport System (SE01)
    Task and Change requests are released from the system using SE09 or SE10 (SE01 can also be used, but not recommended )
    SE01 - To display the workbench Requests
    SE09 - Workbench Request and it is client specific what we BW consultants develop in workbench.
    SE10 - Customizing Requests which is Global. It affects to all the clients in the system. Generally Basis team use to develop it.
    http://help.sap.com/saphelp_nw04/helpdata/en/57/38e1754eb711d182bf0000e829fbfe/frameset.htm
    regards,
    venkat

  • Se01,se09,se10 difference

    what is difference between se01,se09,se10 ?
    explain step wise.plzzzzz.

    Hi,
        SE01 is the main screen of the Change and transport Organizer. From here the administrator can acheive all tasks related to transport requests - such as create, change, view logs, display client/delivery transports, etc. SE09 and SE10 can also be accessed from here. However, not all developers might be granted access to this transaction.
    SE09 is the workbench transport requests transaction - here the developers can track changes to all ABAP workbench objects (dictionary, reports, module pools, etc). This is a developer-specific transaction and mostly all developers have access to this transaction.
    SE10 is the customizing request display transaction - this displays all the customizing requests in the system. Again, this could be restricted to Business analysts if required, since they would be doing most of the customizing changes in the system.
    <b>Reward points</b>
    Regards

  • ICR: program FBICRC_GENERATE_CUST with syntax error

    Hi,
    in our Development system, the auto config program for ICR "FBICRC_GENERATE_CUST" is not working due to syntax error. It works in testsystem and productive system but not in development.
    Anyone experienced the same issue i.e. short dump when running FBICRC_GENERATE_CUST ?
    The following syntax error occurred in program "FBICRC_GENERATE_CUST " in
    include "FBICRC_GENERATE_CUST_F03 " in
    line 51:
    "The data object "LS_FBICRC01000" does not have a component called "HID"
    "E_DCURR"."
    Error analysis
        The following syntax error was found in the program FBICRC_GENERATE_CUST :
        "The data object "LS_FBICRC01000" does not have a component called "HID"
        "E_DCURR"."
    Thanks
    Stephane
    TRIUMPH ASIA

    HI  Eli,
    actually the problem only occurs after we implemented OSS note 1172591 with the SAP delievered transport P3EK049760
    So before having this transport: FBICRC_GENERATE_CUST  works fine
    AFTER the transport P3EK049760 contained in OSS note 1172591  -> syntax error.
    The field "hide_dcurr" is missing in table FBICRC01000
    Cheers
    Stephane

  • Xinitrc comes up with syntax error

    I was trying this setup for an xinitrc file:
    DEFAULT_SESSION=awesome
    case $1 in
    kde) exec startkde;;
    xfce4) exec startxfce4;;
    wmaker) exec wmaker;;
    blackbox) exec blackbox;;
    awesome) exec awesome;;
    openbox) exec openbox;;
    musca) exec musca;;
    wmii) exec wmii;;
    enlightenment) exec e16;;
    ratpoison) exec ratpoison;;
    etoile) exec etoile;;
    compiz) exec compiz;;
    ) exec $DEFAULT_SESSION
    *) exec $1;;
    esac
    Seems like it should work right? Well I guess Bash doesn't like the null case, and throws it out as a syntax error. Anyone know of a way around this?
    The reason I wanted to do this is because sometimes I'll just want to add a WM to /etc/slim.conf just to test it out.

    http://tldp.org/LDP/Bash-Beginners-Guid … 07_03.html
    Each case is an expression matching a pattern. The commands in the COMMAND-LIST for the first match are executed. The "|" symbol is used for separating multiple patterns, and the ")" operator terminates a pattern list. Each case plus its according commands are called a clause. Each clause must be terminated with ";;". Each case statement is ended with the esac statement.

  • Relocations in SE01, SE09, SE10

    Hi All,
    There is an option RELOCATIONS in the tcodes SE01, SE09 and SE10 (Transport Organizer). Please provide information regarding this option.

    Hello Arun,
    Basically every object in a SAP system has a 'source' system where the original version of the object is held. You can only change that object in the original system. This is supposed to prevent that object from being changed in two different systems.
    E.g. You have systems XX1 and XX2. Both systems transport into XY1.
    If you would be allowed to change a certain object in XX1 AND XX2 changes done in the object in XX2 will overwrite changes made to the object in XX1 if the change from XX2 is transported after the one from XX1.
    To avoid this an object has a source system and only there the original can be changed. If you want to transfer the original from one system to another, then you would use a relocation.
    In the above example assumed that the original of the object is XX1, but for whatever reason you want the original of that object to be in XX2 you would have to relocate that object from XX1 to XX2 which would overwrite the XX2 version with the XX1 version and sets the original of the object to XX2.
    Hope that helps,
    Michael

  • Assistance with syntax error please

    this line of AS is giving me a syntax error and I cannot
    figure out the reason, requesting assistance please
    var mclListener.onLoadInit =
    function(target_mc:MovieClip):Void {
    target_mc.setMask(mask_mc);
    TIA

    thanks that resolved my error, but the script isn't working
    as expected. I am practicing from a book with AS 2.0 tutorials and
    this code is supposed to produce a mask from a movie clip over an
    image, but doesn't for me.
    I create a square on frame 1, make it a movie clip with the
    instance name of mask_mc and add this AS to frame 1.
    System.security.allowDomain.allowDomain("
    http://www.helpexamples.com");
    this.createEmptyMovieClip("img_mc", 10);
    mclListener.onLoadInit = function(target_mc:MovieClip):Void {
    target_mc.setMask(mask_mc);
    var my_mcl:MovieClipLoader = new MovieClipLoader();
    my_mcl .addListener(mclListener);
    my_mcl .loadClip("
    http://www.helpexamples.com/flash/images/image1.jpg",
    img_mc);
    my external jpg isn't getting masked by the MC....any
    ideas?

  • StartupItem with syntax error (sh script)

    I'm comfy on the cli but still green with scripting it. I've followed the Apple tut on making a StartupItem, but I am getting simple (I hope) sh syntax errors when I run it. The three *Service functions are required, as they're called by the RunService function (from the sourced rc.common script) ... all per the Apple tutorial.
    In any case, the error I get is:
    line 7: syntax error near unexpected token `}'
    /Library/StartupItems/blah/blah: line 7: `}'
    The complaint is about the bracing earlier in execution than the 'tricky' stuff. I hope that suggests the problem is here and not in my Boot.bash script. I'll post that too if, as I'm noticing with scripting, the complaints about eofs and bracing and such are not where the real problem lies. I'm a bash person though so, especially if this is just an sh syntax misuse, feel free to give me what for.
    Any thoughts, fixes, or straight advice appreciated,
    Joel
    #!/bin/sh
    . /etc/rc.common
    StopService() {
    # nothing to kill
    RestartService() {
    StopService
    StartService
    StartService() {
    /bin/bash /Library/Management/Boot.bash
    RunService "$1"

    Hi Joel,
       I've actually read a scripting guide that recommends defining functions with the "function" keyword and the norm is to put a space before and after the "()". However, your syntax is valid. In fact I see no errors at all; the script should work.
       Thus, the problem is most likely something invisible. It's time to investigate the text editor you used to create the script. You should open the script in a UNIX text editor, like vim, and look for hidden characters or Mac line endings. An even better solution might be to get the free text editor TextWrangler, (or BBEdit if you have it) open the file and set it to show invisible characters. It will also tell you what kind of line endings are used in the file. You might also post a long listing of the StartupItem script.
    Gary
    ~~~~
       He's just a politician trying to save both his faces...

  • Cannot change password on LPM page with syntax error / AD2008

    Hi,
    In the Lost password Management page, user are prompt to change the password by input the old and new password.
    Identity/oblix/apps/lost_pwd_mgmt/bin/lost_pwd_mgmt.cgi?
    After type in the new password and click save the following error shows:
    "The Directory Server password syntax was violated. The password cannot be changed"
    Using AD2008 with ADSI security mode. OAM 10.1.4.3.0 BP03 on all components. Any idea on the above error?
    Appreciated for any feedback.
    Thanks

    Hi,
    The error message means that AD is not accepting the value for the new password. Usually that means that there is a password policy in AD itself (perhaps which requires 1 upper case letter, 2 non-alphanumeric characters etc) which is causing the value to be rejected. If that is the case, you could match OAM's password policy to be as close as possible to AD's (so that OAM can do the validation before sending it off to AD).
    Regards,
    Colin

  • Read table with syntax error

    I would like to have this in my report in ABAP 7:
              READ TABLE ti_prococolos WITH KEY
                                   protocol = lc_protocol
                                   status    = 'abc'
                                   status    = 'ced'.
    But I receive the following error, when verifying the syntax:
    Key field "STATUS" has been used more than once. This is not allowed .     
    How can I solve this?
    Thanks!

    The READ statement is used to read a specific row of the internal table, in this case it appears that you are saying that you want a record if the STATUS is either abc or def.  You can't do that with the READ.  You would need to use the LOOP.
    Loop at ti_prococolos where protocol = lc_protocal
                                        and ( status = 'abc' or status = 'ced' ).
    * do what ever here, and EXIT after since you only want one row.
    EXIT.
    endloop.
    Regards,
    RIch Heilman

  • SCMS_XSTRING_TO_BINARY  giving dump with this error .

    Error in the ABAP Application Program
    The current ABAP program "ZGY_CUST_TAB_UPDATE" had to be terminated because it
      has
    come across a statement that unfortunately cannot be executed.
    Function module "SCMS_XSTRING_TO_BINARY" was called
    with the parameter "BINARY_TAB".
    This parameter is not defined.

    DATA: l_xml_table       TYPE TABLE OF t_xml_line,
          l_xml_line        TYPE t_xml_line,
       CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
          EXPORTING
            buffer          = ls_values_xml
            append_to_table = 'X'
          IMPORTING
            output_length   = lv_length
            binary_tab      = l_xml_table.
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was
    not caught and
    therefore caused a runtime error.
    The reason for the exception is:
    Function module "SCMS_XSTRING_TO_BINARY" was called
    with the parameter "BINARY_TAB".
    This parameter is not defined.
      Probably the only way to eliminate the error is to correct the program.
      If the error occures in a non-modified SAP program, you may be able to
      find an interim solution in an SAP Note.
      If you have access to SAP Notes, carry out a search with the following
      keywords:
      "CALL_FUNCTION_PARM_UNKNOWN" "CX_SY_DYN_CALL_PARAM_NOT_FOUND"
      "ZGY_CUST_TAB_UPDATE" or "ZGY_CUST_TAB_UPDATE"
      "START-OF-SELECTION"
    I am not able to find the SAP Note ..

Maybe you are looking for