Compiling a programme with third party package help

Hello all,
I am writing a programme with a third party package (freetts.jar). The jar is is the classpath of my 2003 server and it compiles ok.
import com.sun.speech.freetts.Voice;
import com.sun.speech.freetts.VoiceManager;
import com.sun.speech.freetts.audio.JavaClipAudioPlayer;
When I go to run it with java it cant find a class in the package!! I dont get it?
When it gets to this part it throws Exeption in thread main java lang noclassfounddeferror com/sun/speech/freetts/VoiceManager
public void myVoice(){
VoiceManager voiceManager = VoiceManager.getInstance();
Voice helloVoice = voiceManager.getVoice("kevin16");
/* Allocates the resources for the voice.
helloVoice.allocate();
/* Synthesize speech.
helloVoice.speak("Thank you for giving me a voice. "
+ "I'm so glad to say hello to this world.");
It says that it cant find VoiceManager...I cant work it out, VoiceManager is in the package it imported ok at compilation.....why cant it see it when I run it?? This is driving me CRAZY...please help.
Phil.

Yes you were kinda right.. I went back and had another look at the 2003 environment variables. They have one set for the system and another for the current user. I have come to the conclusion that the system variable classpath just doesnt work. I looked at it over and over again and it looked ok to me. I just put the same thing in the users variables and low-and-behold it works!!!!
Go figure!
Thanks for that, I just needed a trigger.
Phil.

Similar Messages

Problems with third party package and file access

I am using a third party package that allows me to decode
multipart forms that I use to upload files to our server.
I have been able to write my own code (JSP) that both reads and
writes to our filesystem. However, when I try to upload a file
using the third party package the method I am using fails with
the following IO exception: The error message is "access is
denied." But the files get written and are usable (even binary
files). I have checked the directories and all the dirs I am
writing to have read, write and execute permission.
I have access to the code so when I duplicate the actual
methods used for writing (FileOutputStream.write(foo)) in my
JSP, it writes fine without exceptions. In fact, I use
FileOutputStream.write() in other code and it works fine. My
question is: why would FileOutputStream work in packages we have
developed and not in a third-party package. I have added the
codebase and filePermissions to <weblogic_home>\weblogic.policy
without any changes.
I am running WLS 5.1 and NT 4.0 with SP5.
Does this problem sound familiar to anyone?
thanks for any and all help,
saulj

HI Mike,
If you have third party Document Management System, then you can post two different message, i.e. service order in transaction details of the third party tool with link to document which would be posted to third party Document management server.
If you don't have third party document management system and what to use sap infrastructure, then you don't need to maintain attachment, maintain the link between the third party tool and SAP document repository, with some login utilities.
Best Regards,
Pratik Patel.
Reward with points if it is of any help to you!

Compiling problem when importing third-party package

Hi,
I have a question about compiling a java application program. I tried to use a free package from third-party, say "abc.jar". I added it to my classpath by setting Win2000 CLASSPATH environmental variable.
When I compile the program, it complained that it can not find the classes inside the abc.jar file.
My program is located at: C:\test\Test.java. The abc.jar file is located at: C:\libraries\abc.jar. It is already set in classpath.
Here is the structure of Test.java:
import com.abc.def.ghi.PLOT;
import com.abc.def.ghi.GRAPH;
class Test {
//main method using PLOT and GRAPH classes from abc.jar
Suppose now I am in C:\test\ directory, this does not work.
javac Test.java
Then still in C:\test\ directory,I tried:
javac -classpath ".;c:\libraries\abc.jar" Test.java
Still it does not work, it complains that it can not resolve symbol "PLOT","GRAPH".
How to solve this problem?
Thanks.

I'd put that JAR file in the same directory your Test.java file is in for now. You should keep it close to the Java files that use it in any case, IMO.
Ditch that system CLASSPATH. (I don't have one.) You should always set the CLASSPATH as you need it when you compile and run.
The statement you need to compile is:
javac -classpath .;abc.jar Test.javaIf that works, you run by typing:
java -classpath .;abc.jar TestThis assumes no package statement in Test.java.
Are you sure that JAR contains two files named PLOT.class and GRAPH.class, both with paths com.abc.def.ghi? If not, the class loader won't find them in the JAR.
It'd be better if you cut & pasted the message verbatim. If you've quoted it properly, the error you got sure is weird.
That message means you've got a CLASSPATH problem. It's the stumbling block of every newbie. Don't rest until you figure out what you've done wrong. - MOD

Integration with Third party Help Desk

Hello,
We need to integrate SAp solution Manager 3.2 with third party Help Desk software Like REMEDY ....
So that messages updated in Remedy are updated with Solution manager and vice versa.
Can we have some soltuion on that ?
Deepti

look here:
<a href="http://help.sap.com/saphelp_sm40/helpdata/en/65/e0a3a3040348ffa71f0908679a883e/frameset.htm">http://help.sap.com/saphelp_sm40/helpdata/en/65/e0a3a3040348ffa71f0908679a883e/frameset.htm</a>

Help With Third Party Wireless Cards

Hello, I am needing some help with third party wireless cards. I have purchased and installed the Linksys WMP54G wireless PCI card into my G4. From what ive seen on the discussions page here, this card is known to work with the G4s in place of the more expensive Airport Extreme card. The only problem is that my G4 doesnt even recognize that the card is in the PCI slot. Ive tryed the other PCI slots and still nothing. Previously, i have tried using a belkin and a d-link card that have been known to work in the G4s as well, and had the same problem. I am 100% sure that the card is seated correctly, and cant think of any other reason why it shouldnt detect that something is in the slot. If anyone can inform me what im doing wrong, or has any info on how to get it working, that would be great. Thanks for your time,
~Jared
Powermac G4 Mac OS X (10.3.8) 2 gb ram, 200 gb hd, dual display

Yes, i run Digidesigns audio editing program called Protools on my Mac. It uses a PCI card to import mic/line audio signals into the program from the hardware interface. I tried moving the Digidesign card and putting the wireless card in the same slot, and still nothing, although the Digidesign card works fine in the other slots. Each time i moved the Digidesign card, it showed up in the different slots, although the ones that were open did not show up at all. Only the PCI slots that are in use show up in ASP on my machine. I have the FW-800 version of the G4, so im not sure if that makes any difference. I have never erased the PRAM before, would you be able to give me directions on how to do that? Thanks a ton for your help. =)
Powermac G4 Mac OS X (10.3.8)

*URGENT* importing third party package into Jdev project

hi,
our company has bought a thrid party package instead of developing one to speed up the project pace. Some how we cannot import the package into our project environment,
this is what we do with the package.
set the class path to where the *.jar files are, for example: C:\AccBank\beta\creditcheck.jar
please note that the "C:\AccBank\beta\" is where the project file locates.
and follow is the import statement
import thirdparty.package1.*;
please tell us what did we do wrong, if the case in question is not clear, please tell us the steps we need to do to import and use a third party package with JDev.
Also, please tell me the different purpose between the directory :
PROJECTFILES and CLASSFILES under the main project directory
Thank you very much for your time and your help
Augustina
null

Hello,
I'm not sure about what you mean,
but in order to use a given package within JDevelopper, you should:
- select project/project properties,
- find the libraries tab
- click "add", then "new"
- click "class path"
- click "add ZIP/JAR" and add the various jar files you want to include
Note: if the included libraries contain subpackages of packages like javax, and you want to deploy your project (as EJB for instance) you will have to edit the deployment profiles in order to add the 3rd party libraries, otherwise, these subpackages won't be deployed (by default, packages suvh as java.lang, javax etc.. are not excluded from the deployment).
about the PROJECTFILES and CLASSFILES items, they refer to the directories in which your project's source code (PROJECTFILES) and compiled classes (CLASSFILES) are stored
Hope this helps, Remi
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Augustina:
hi,
our company has bought a thrid party package instead of developing one to speed up the project pace. Some how we cannot import the package into our project environment,
this is what we do with the package.
set the class path to where the *.jar files are, for example: C:\AccBank\beta\creditcheck.jar
please note that the "C:\AccBank\beta\" is where the project file locates.
and follow is the import statement
import thirdparty.package1.*;
please tell us what did we do wrong, if the case in question is not clear, please tell us the steps we need to do to import and use a third party package with JDev.
Also, please tell me the different purpose between the directory :
PROJECTFILES and CLASSFILES under the main project directory
Thank you very much for your time and your help
Augustina <HR></BLOCKQUOTE>
null

How to integrate iReceivables with third party payment system?

Hi,
My requirement is to integrate iReceivables with third party payment system.
Can anyone guide me to achieve this.
Thanks & Regards,
Sunita

Hello Prasad,
<b>Connection with an External Payroll System</b>
Payroll Outsourcing functionality allows you to compile master data or payroll data in the SAP system to submit to a third-party service provider in an electronic format. The Outsourcing solution available in the United States and Canada provides a generic interface which writes data into an IDoc (Intermediate Document) for transport to a third-party system. In order to transport data into and out of the SAP system, you must set up a logical system, partner definition, and outsourcing ports.
If you have built your own payroll interface, using the Interface Toolbox, for example, you can use the Import section of this scenario. The Export section applies only to the transport of IDocs.
For more information regarding outsourcing, refer to the SAP Library, Human Resources -> PY Payroll -> PY-US United States Payroll or PY-CA Canada Payroll -> Outsourcing.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/af/f4ea3444e9c47fe10000009b38f83b/frameset.htm
Import Payroll Results from a Third-Party System
http://help.sap.com/saphelp_erp2005vp/helpdata/en/0a/e62481feaf11d1a5500060087832f8/frameset.htm
regards
Prasad
Message was edited by:
prasad chintala

Using third party packages

I'm using NetBeans with a Nokia S60 sdk installed to write an app for a phone.
I need to use a third party math package in the app, but I am new to this, so I have no idea how to do it.
I've downloaded and unzipped the files for the third party package, but where do I put them and how to I use them in my project?
(I don't mean how do I use the new functions, but how to I access them in NetBeans ... how do I NetBeans to "see" them ... just wanted to be clear about what I was asking).
Thanks.
Message was edited by:
AlJohnJeffJoe

Okay, almost there. I added the folder and was then able to use the commands.
However, when I went to compile I got a weird error:
Error preverifying class wabaMathFP
java/lang/NoClassDefFoundError: waba/ui/MainWindow
I am not using the waba stuff as far as I know, but I did see some waba class files in the same folder. Could that be the problem? It is trying to verify ALL the class files in that folder?
Any suggestions?

UTF8 DB using third party package

I have an Oracle DB defined with the UTF8 characterset. I can use Oracle Forms to insert and retrieve multibyte characters from the DB however, I have not been able to retrieve multibyte characters using third party packages. These packages can retrieve multibyte characters from other DB's. Does anyone have any suggestions or other information about retrieving multibyte characters from Oracle DB's.
Thanks
Scott

Hi,
Unfortunately there was a regression bug around using the Generic JDBC connector to a Foreign Database in this Technology Preview (3). I'm not able to give you good news as I don't have a workaround for you either.
You could use SQLDeveloper to connect to the database for live work, unfortunately that will not help if you wanted to create offline objects of some sort using JDeveloper.
regards
Susan
http://www.susanduncan.blogspot.com

Really Apple? OSX 10.8.5 disables built-in camera functionality with third party apps such as Skype and Gmail video chat. I do not have time machine on my 2013 MB Air. How can I get back to 10.8.4?

Really Apple?
With the release OSX 10.8.5 Apple has once again showed its true colors, and continued its efforts to create a closed Apple system, which eliminates third party vendors, unless, one can only assume... they pay.
Included in this OSX update is the disabling of the built-in camera to work with third party applications such as Skype and Gmail video chat. No surprise the camera works just fine with Apple apps such as Facetime and Photobooth.
The answer I got on my call to AppleCare to ask for assistance in reinstalling 10.8.4, so that I may Skype again, was we can not do that. You can not go back unless you have a time machine bkup.
Can anyone help me get back to to 10.8.4 on my 2013 MB Air?
I do not have a time machine bkup as this computer is not used to store important documents.
Thank you.

Read this post: 10.8.5 Broke Camera Usage For 3rd Party Apps Like Skype
Another: isight not recognized in Skype after 10.8.5 upgrade
Don't panic. Skype simply needs to update its app.

How to integrate single sign on with third party system

we are in the process of implementing istore application. we already have home grown isupport application to contact support personnal for any issues. Now we are wondering how do we integrate oracle applications single sign on with our third pary system. Is there any recommendation provided by oracle to achieve the same.

We too are in the process of implementing iStore with SSO features.
And if you believe me it seems to me as nightmare.
In our scenerio we are intgrating this SSO with Third party access control too (AD and Siteminder). I would request you to please respond me on the following mail id , so we can share our experince which will help us in our implementation
[email protected]
regards and thanks in advance
Vikas Deep

SharePoint 2013 on-premises integration with third party email account

the Email sending issue from SharePoint is causing too much time waste
First let me explain how our SharePoint is deployed
Sharepoint version : 2013
Deployment type : on-premise
Authentication : from Domain controller also hosted locally
domain name ; say domain.com this domain.com is same as our website address hosted on godaddy
SharePoint computer name on local DNS : sharepoint.domain.com
OS and IIS : 2008 r2 , IIS 7.5
Network firewall : 25 26 ports opened for sharepoint , both incoming and outgoing.
Server firewall : turned off
Email configuration Attempts by IIS 6.0
We tried following setting on IIS 6.0 SMTP local server properties
In General tab
qualified name was shown as : sharepoint.dts-solution.com
IP assigned : sharepoint server IP , advanced putted two entries of IP with ports as 25,26
In Access tab
Authentication : selected as Anonymous
Connection : All except below list : empty list
Relay : only the list below , one entry as 127.0.0.1 and other is local static IP of SharePoint server
in Delivery tab
outbound security : Basic authentication : accessed user in AD and given the right password, also checked with annonymous -not working
outbound connection: all default values and port = 25
Advance : fully qualified domain name = sharepoint.domain.com , DNS test showed success, rest every check box unchecked
On sharepoint central management settings
Outbound email = sharepoint.domain.com
from and reply to address = [email protected]
IIS 7.5 SMTP settings
In IIS 7.5 sharepoint application we added SMTP settings as smtp server = godaddy out going smtp , user name as [email protected] , password = godaddy password , port : godaddy outgoing port .
Godaddy account
Our website hosted on godaddy with same name as domain.com
open relay not possible on emails.
Results
After setting alerts on SharePoint sites and assigning tasks with alerts we receive email in queue folder but they never get forwarded. We just wish to use any of our email *.domain.com to send outgoing emails from SharePoint . Its been a while we have no
success.
Tech Learner

Hi,
As I understand, you are using SharePoint 2013 integrating with third party SMTP server which provides email function.
From SharePoint side, I'd suggest you refer to the link below to configure email integration:
http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
If you have already confirm that message is sent from SharePoint, while stuck in queue on SMTP server, then the issue might be related to relay on SMTP server. Since the issue is related to third party product, we do not have enough resource here,
I'd recommend you contact their support engineer for more assistance:
https://support.godaddy.com/help/category/154/email
https://support.godaddy.com/help/article/3552/managing-your-email-account-smtp-relays
Thanks for the understanding.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Conflict with Third Party Apps?

I am getting an occasional error saying there is a possible conflict with third party apps and that I need to check the drivers of my MIDI devices to see if they are up to date? Sorry but I did not record the exact wording. Does anyone know what this might mean, and how I need to go about checking drivers? I have a lot of interfaces and not sure how to see what's what. Thanks.

Hi Midlake,
Well, because they are known troublemakers. Search for 'takes' or 'take folder(s)' or 'comp' here on the forum and you'll find many a troubled soul crying out for help - including seasoned pro's, who thought they were beyond tears...
O, they are fine for recording many takes - but thats' all. I'll select the best takes/phrases.
regards, Erik.

How to use third party package in java application

hi, i am a student , new to java world can any of u tell me how to import third party package in our java application.
i want to know how CLI is done in java.
i am going thru this link http://www.codezoo.com/pub/component/5574
not able to get anything.
please please help me

There are two steps -
1. Import the classes you need from the package(s) using the Java import statement in your classes that need access to them.
2. include the 3rd part code (one or more .jar files and/or root directories holding the code's package tree and .class files) to your javac and java class path and optionaly to the class path found in your .jar's manifest file.

SAP IDM 7.0 integration with third party system

Hi Experts,
I know SAP IDM 7.0 can integrate with third party systems and create user ids on most of the third party systems.
But I need to know regarding If it is possible to integrate with following systems
1) Microsoft Exchange 2007 ( I know till exchange 2003 SAP IDM support )
2) Microsoft Active directory 2008 ( I know till Actice directory 2003)
3) EMC Documentum 6.5
4) ARIS 7.1.0
5) BlackBoard, Release 9.0
6) Oracle 10g ( Is it possible to create users at oracle level ? or at what level ? )
7) Sun Solaris Sparc ( Is it possible to create users at OS level )
If you have information how on this please share. I know that provisioning framework will have templates for most of the target systems. I want to know if they are available for above systems on SAP IDM 7.0 or if not have we can connect to them?

Hi Matthew
Your expertise in SAP IDM is indeed a great help!!
>Can't see why not, it's all done via SQL commands. I've done similar things with MSSQL
You mean that there will be oracle 10g drivers/oledb connectors in SAP IDM and in through SQL commands like "create user alfredo identified by alfredos_secret; " we can create user in oracle database ?. As you said this should be possible. What about creating user( user management ) in oracle 10g application like dba or scot and assigning the privileges in oracle application?
>might need to do via UNIX scripts, but it can be done
You mean that Unix scripts will be defined in SAP IDM and SAP IDM will execute these scripts in the Sun Solaris Sparc ?. It should be possible as you said. By the way how we will be able connect to Sun Solaris sparc ? Is it via the option "file " under the "Repositories" with repositories wizard and later executing the file from SAP IDM ?
Thank you once again for your expert answers on third party systems.

Compiling a programme with third party package help

Similar Messages

Maybe you are looking for