Completed 543  without 541.

Hi Friends,
For Material- 10001000, I can find the 543 movement. But there is no 541.
Details:
Subcon PO- QTY-50 for parent mat- ABCDEFG.
Components maintained  - 100 pcs of “COMPABC”
The issue is:
-     I didn’t issue 100 pcs of components (541) to vendor.
-     But completed GR for parent model for 50 qty (101). Automatically taken 543 for 100 pcs.
I am surprising and cannot find how it has happened, with out issuing (541), How system allowed for 543.
Please advise.
Best Regards,
RAMAN.

Hi,
Unless the stock is provided to subcontractor GR will not be posted as per message no. M7 021.
In your case, since the GR is posted, which implies that the stock has already been provided to sub-contractor. However, in which mode (such as 101 'O' or 561 'O' etc..) the stock has been provided needs to be verified against that component through transaction MB51.
Thanks,
Shree

Similar Messages

  • How can I move an event in my calendar to my "completed" calendar without changing all the events in the series?

    How can I move an event in my calendar to my "completed" calendar without changing all the events in the series?
    As Apple has yet to upgrade iCalendar so I can check off my events as I complete them (no, I do not want to use a task list/reminder list), I want to be able to move my events to my "completed" events calendar as I complete them. The issue is that most of my events are repeating events, and it changes the entire series. How do I change only the event I clicked on using my iPhone?
    Thanks

    If you change anything in a repeating calendar entry it will give you the option of disconnecting it from the series. So may any random change, choose to not change the series.

  • Warning... dumb question ahead:  Tech guy who set up my Mac didn't give me my password info. Didn't need it till I decided to finally download a Flash Player upgrade, which won't complete process without my Mac password.  Suggestions?

    Warning... dumb question ahead:  Tech guy who set up my Macbook Pro didn't give me my password info, and yes I forgot to ask for it.   Didn't need it till I decided to finally download a Flash Player upgrade, which won't complete process without my Mac (Admin?) password.  Suggestions anyone?

    Warning... dumb question ahead:  Tech guy who set up my Macbook Pro didn't give me my password info, and yes I forgot to ask for it.   Didn't need it till I decided to finally download a Flash Player upgrade, which won't complete process without my Mac (Admin?) password.  Suggestions anyone?
    Forgot Mac Password? How to Reset Your Mac Password (with or without CD)
    Changing or resetting an account password

  • Why when i set my mac in sleep it starts alone and also complete stop without I do anything (Mac mini Mid 2011 - Yosemite)

    Why when i set my mac in sleep it starts alone and also complete stop without I do anything (Mac mini Mid 2011 - Yosemite)

    in response to lllaass
    here what I copied from Console:
    27/12/2014 02:29:58,457 WindowServer[185]: WSGetSurfaceInWindow : Invalid surface 1336265605 for window 268
    27/12/2014 02:30:02,516 WindowServer[185]: WSBindSurface : Invalid surface 1040636110 for window 266
    27/12/2014 02:30:17,370 com.apple.xpc.launchd[1]: assertion failed: 14B25: launchd + 160118 [55B9FF23-B298-321A-B776-CF7676586C04]: 0xe
    27/12/2014 02:30:17,371 com.apple.xpc.launchd[1]: assertion failed: 14B25: launchd + 160118 [55B9FF23-B298-321A-B776-CF7676586C04]: 0xe
    27/12/2014 02:30:18,819 Office365Service[2012]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.1 instead of 10.10.1. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
    Call location:
    27/12/2014 02:30:18,819 Office365Service[2012]: 0   CarbonCore                          0x901777e7 ___Gestalt_SystemVersion_block_invoke + 135
    27/12/2014 02:30:18,819 Office365Service[2012]: 1   libdispatch.dylib                   0x960dc130 _dispatch_client_callout + 50
    27/12/2014 02:30:18,819 Office365Service[2012]: 2   libdispatch.dylib                   0x960dc0b5 dispatch_once_f + 251
    27/12/2014 02:30:18,819 Office365Service[2012]: 3   libdispatch.dylib                   0x960dd0d8 dispatch_once + 31
    27/12/2014 02:30:18,819 Office365Service[2012]: 4   CarbonCore                          0x90109fb8 _Gestalt_SystemVersion + 1050
    27/12/2014 02:30:18,819 Office365Service[2012]: 5   CarbonCore                          0x90109b69 Gestalt + 150
    27/12/2014 02:30:18,819 Office365Service[2012]: 6   Office365Service                    0x000589a3 Office365Service + 358819
    27/12/2014 02:30:29,794 warmd[36]: [_bootcachectl_playlist_for_file:3197] Unable to generate playlist for file: 2 No such file or directory
    27/12/2014 02:30:29,794 warmd[36]: [_bootcachectl_playlist_for_file:3197] Unable to generate playlist for file: 2 No such file or directory
    27/12/2014 02:30:29,797 warmd[36]: [_bootcachectl_playlist_for_file:3197] Unable to generate playlist for file: 2 No such file or directory
    27/12/2014 02:30:29,797 warmd[36]: [_bootcachectl_playlist_for_file:3197] Unable to generate playlist for file: 2 No such file or directory
    27/12/2014 02:30:29,797 warmd[36]: [_bootcachectl_playlist_for_file:3197] Unable to generate playlist for file: 2 No such file or directory
    27/12/2014 02:30:29,799 warmd[36]: [_bootcachectl_playlist_for_file:3197] Unable to generate playlist for file: 2 No such file or directory
    27/12/2014 02:30:29,801 warmd[36]: [_bootcachectl_playlist_for_file:3197] Unable to generate playlist for file: 2 No such file or directory
    27/12/2014 02:30:30,870 xscertd-helper[2020]: ldap_search_ext_s returned -1 - Can't contact LDAP server when searching for bdb suffix, exiting
    27/12/2014 02:30:30,883 com.apple.xpc.launchd[1]: (com.apple.xscertadmin[2020]) Service exited with abnormal code: 1
    27/12/2014 02:30:30,928 coreaudiod[1249]: 2014-12-27 02:30:30.927642 AM [AirPlay] Power: SystemWillSleep
    27/12/2014 02:30:30,928 coreaudiod[1249]: 2014-12-27 02:30:30.927798 AM [AirPlay] BTLE client stopping to browse for AirPlay Solo Target Presence.
    27/12/2014 02:30:30,928 coreaudiod[1249]: 2014-12-27 02:30:30.928007 AM [AirPlay] BTLE discovery removing all devices
    27/12/2014 02:30:30,929 coreaudiod[1249]: 2014-12-27 02:30:30.929458 AM [AirPlay] BTLE client stopped to browse for AirPlay Solo Target Presence.
    27/12/2014 02:30:30,931 watchdogd[162]: [watchdog_daemon] @(         pm_callback) - ref=0x0 msg_type=0xe0000280 msg=0x2a0005
    27/12/2014 02:30:30,931 watchdogd[162]: [watchdog_daemon] @(    wd_daemon_thread) - events buffer: 65r1069 3634s1069
    27/12/2014 02:30:30,965 Office365Service[2012]: System shutdown notification
    27/12/2014 02:30:31,001 WindowServer[185]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x7fbf43423ed0(2001)
    27/12/2014 02:30:31,044 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2c4fef0>: notification observer: com.apple.iChat   notification: __CFNotification 0x7ffac2d4efa0 {name = _NSDoNotDisturbEnabledNotification}
    27/12/2014 02:30:31,044 imagent[1305]: <IMMacNotificationCenterManager: 0x7fde8a42c1e0>: notification observer: com.apple.FaceTime   notification: __CFNotification 0x7fde8a54a860 {name = _NSDoNotDisturbEnabledNotification}
    27/12/2014 02:30:31,089 WindowServer[185]: device_generate_lock_screen_screenshot: authw 0x0(0)[inf, inf, 0, 0] shield 0x7fbf43423ed0(2001), dev [1680,1050]
    27/12/2014 02:30:31,000 kernel[0]: PM response took 168 ms (1194, UserEventAgent)
    27/12/2014 02:30:31,105 WindowServer[185]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x7fbf43423ed0(2001)
    27/12/2014 02:30:31,180 apsd[59]: Peer [pid=1203] requested push wake but lacks APSPushWakeEntitlement
    27/12/2014 02:30:31,228 imagent[1305]: <IMMacNotificationCenterManager: 0x7fde8a42c1e0>:    NC Disabled: NO
    27/12/2014 02:30:31,228 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2c4fef0>:    NC Disabled: NO
    27/12/2014 02:30:31,237 imagent[1305]: <IMMacNotificationCenterManager: 0x7fde8a42c1e0>:   DND Enabled: YES
    27/12/2014 02:30:31,237 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2c4fef0>:   DND Enabled: YES
    27/12/2014 02:30:31,237 imagent[1305]: <IMMacNotificationCenterManager: 0x7fde8a42c1e0>: Updating enabled: NO   (Topics: (null))
    27/12/2014 02:30:31,237 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2c4fef0>: Updating enabled: NO   (Topics: (null))
    27/12/2014 02:30:31,237 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2e30040>: notification observer: com.apple.iChat   notification: __CFNotification 0x7ffac2c43f40 {name = _NSDoNotDisturbEnabledNotification}
    27/12/2014 02:30:31,244 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2e30040>:    NC Disabled: NO
    27/12/2014 02:30:31,249 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2e30040>:   DND Enabled: YES
    27/12/2014 02:30:31,249 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2e30040>: Updating enabled: NO   (Topics: (null))
    27/12/2014 02:30:31,000 kernel[0]: PM response took 347 ms (71, blued)
    27/12/2014 02:30:49,000 kernel[0]: PM response took 3456 ms (31, powerd)
    27/12/2014 02:30:49,000 kernel[0]: Failed to get hibernate image filename
    27/12/2014 02:30:49,000 kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
    All that is really chinese for me Do you know where i could get anything to be teached about all that
    Thanks

  • I recently purchased a used iMac mid-2011 and just updated to Mavericks yesterday, but has previous owners Apple ID under app icon. It won't let me complete update without that ID and password. How can I edit this?

    I've had no issues changing Apple ID under preferences, etc. But it won't allow me to just click and change user name. Just says to put in password. I'm logged in under iTunes but haven't completely changed over my iTunes account from my old computer yet. Would that be a cause?

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
    How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
    1. If you don't own another Mac
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received those media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
    2. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    3. Partition and install OS X
    a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
    b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the  Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    c. An unusual problem may arise if all the following conditions apply:
    OS X 10.7 or later was installed by the previous owner
    The startup volume was encrypted with FileVault
    You're booted in Recovery mode (that is, not from a 10.6 installation disc)
    In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
    d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
    4. Other issues
    a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

  • Try as I might I can not import my CDs, along with their info into iTunes. Either they arrive complete or without the artist, album or cover... I am using v10.5.3.3. Any ideas?

    Try as I might I can not correctly import my CDs. Either they come in complete or they arrive without info (i.e. Artist, Album, cover page and so forth). Any ideas on how to solve?

    Try posting in the iTunes forum sinc you have an iTunes issue not an iPod touch issue.

  • A500-ST6622 shuts off (completely dies) without warning

    My Satellite A500-ST6622 purchased in Nov. 2009, running Windows 7 with all updates, has run flawlessly until a few days ago.  Twice in the last three days while using the laptop, which was plugged into the AC outlet (it is plugged in 100% of the time), the computer instantly and completely shut off without warning.  It does not shut down or crash, but completely dies as if the power source were instantly removed.
    The first time it happened I tried to restart the computer by pressing the power button but the unit again went dead (completely shut off) during boot up.  Next I disconnected the the AC power adapter, removed the battery briefly, reinserted the battery and booted up the computer without a problem.  The computer operated without problems for three days, then went dead again. 
    Any idea what would cause this?
    Thanks for any assistance.
    Greg Tomerlin
    Lebanon, TN

    Thats like a old issue. happens on quite a few Satellite models. Happened to mien too. Sent mine in for repair many times and always came back with the problem reappearing after one or more days. Taking a month to "repair" each time, my labtop warrenty ran out and its stuck with this same stupid issue. (I also had to send it in a few times because of Toshiba's failture to reseat everything(like the cd drive and usb ports) properly so that wasted more time). Toshiba has never sovled this issue and its a pain in the buttk. Dont' think Toshiba can even fix it either. Eventually you won't be able to turn on your computer(shuts off doring POST). The problem worsens over time and Toshiba can't fix it.  I'd say I barely got ot use my labtop for like 90 days out of the whole year of warrenty. Hardware Failure is a common problem in Toshiba Satellite computers

  • Export complete PPT without extras folder

    I need to make presentations that can be played by a Windows computer and the user (my boss) does not want to deal with the extra folder for media (PPT_media). Since he gets complete, single PPT documents from Windows users, he wants the same from me. Without buying Office for Mac, how can I get Keynote to export a presentation that includes Flash videos and MP3 embedded in the slides and end up with a correct, single PPT file that will play correctly with sounds and videos embedded? After all, if this can only be done by buying Office, why do I have iWork? Keynote must have the ability to export a fully embedded presentation without all those extra, separate files, right?

    Hi Javier,
    I have implemented your suggestions but Xcelsius still does not generate the AIR file.  Specifically the steps I took were as follows:
    1) Version 3.0 of the Flex SDK was the version installed on my computer.  I installed the latest version, 3.1 and made sure the file path to the root directory of the SDK was specified in the sdkPath.dat file;
    2) I uninstalled Java and reinstalled the latest version 1.6.0_07-b06;
    3) I uninstalled Adobe AIR 1.0 and installed the new version, AIR 1.1;
    Even after the above steps, the AIR Export function does not generate a ".air" file.
    In addition to the Flex SDK 3.1 and Adobe AIR 1.1, is it also necessary to download and install the Adobe AIR SDK ?
    You have indicated that the AIR export works fine in your environment.  Have you been able to consecutively export AIR files after your initial successful export?  And to different folders as well?
    Thanks,
    Mustafa.

  • How can I play The Sims Complete Collection without PowerPC applications being supported?

    So I downloaded Mavericks a while ago after my friend told me it was a really good idea. I hated almost everything about it to start with and since then I've found I don't hate everything but still a lot of things. I was on Snow Leopard before and, even though it was old, it was lovely; I knew where I was with it and everything worked.
    Today I went to play The Sims Complete Collection for the first time since downloading Mavericks a few months ago and it told me 'You can't open the application "The Sims Complete because PowerPC applications are no longer supported." I am SO ANGRY. I would quite happily buy the game again but they don't make them anymore so they'd all have the same system requirements. What's most frustrating is that I sold all my original edition Sims games that I'd been collecting for years to buy Complete Collection for Mac so I could still play the game I've played since the week it was released. Basically I need someone to tell me how to do one of these things;
    1- Downgrade to Snow Leopard again. Bit extreme but I like the Sims a lot. I have the original discs that came with my macbook if that helps at all.
    2- Don't think it can be done but is there a way I could have my Sims Complete Collection on my EA origins app? Like all my Sims 3 are.
    3-  Make PowerPC Applications playable
    4- Basically anything that makes my game playable!

    Izzy118,
    The short answer is that you will not be able to run Sims on your Mac unless a OSX Lion update is released.
    Have a look at this thread on the Sims forum about a patch for Lion.
    The long answer is that you can try to install Fusion and Snow Leopard Server, but at a cost.
    Fusion is not free. Snow Leopard Server is several hundred dollars.
    It will be less expensive to buy an old Mac just for your games.
    Sam.

  • Can this be done? Emailing a completed form without emailing.

    When using a standard html form, a user can fill in the required fields, press post, and abracadabra, the results of the form are emailed to the specified account and the user is redirected to a page that says your form has been submitted.
    Can this be done using a .pdf? The email button is simply retarded. Why do users have to go through the hassle of having their email client opened just to submit the form they just completed? There probably isn't any other way, but would be nice if there was.
    Is it possible to create a submit button that will automatically email the completed .pdf form to a pre-specified email address and then redirect the user to a "thank you" page? I don't want to annoy my customers by forcing them to email me the form. I just want it sent when they click "submit."
    Is this even possible? If so, is it relatively easy?
    Any help is greatly appreciated!

    >Can this be done using a .pdf?
    Sure. The principle is exactly the same: you submit data to a script
    which runs on a web server. You are limited only by what the
    programmer has made the script do. Don't be under any impression that
    it is "magic": if you have a web form which submits and then you get
    an e-mail it's because there is a script on a web server that a web
    programmer wrote to make it happen.
    > The email button is simply retarded.
    I prefer to think of it as a handy tool for testing, but nothing
    anyone would use for the real solution.
    >Why do users have to go through the hassle of having their email client ...
    They don't. Did you know that you can "submit" an HTML form to e-mail?
    But nobody does, because it just isn't a good way of working. Everyone
    expects an HTML form to submit to a web script, but for some reason
    hopes they can use direct e-mail of PDF forms.
    Aandi Inston

  • Changing Tab order in a completed form without altering or moving fields here and there

    Hi All,
    I've made a complex questionairre and is almost complete. Now the problem is that when I converted this file from Word, many fields were automatically detected and their tab order/ numbering was set by Acrobat itself. The remaining fields in the form (at different places) were created by myself. Now in the tab ordering, the fields automatically detected have priority and the fields I created, are much different from the corresponding fields in tab numbering. For your understanding, I'm including the screenshot too. Please see the tab numbering in the image and after field # 7, there is field # 28, then field # 26, and then field # 29 which is not the way it should be.
    Please advise any solution (if there is any) on your earliest convenience.
    Thanks in anticipation!

    Have you opened the "Pages" navigation panel and looked at the options for the page?
    There should be a series of options like "Row", "Column" or "Unspecified". Select the "Row" and see if the form tabs the way you would like.

  • Sending completion information without LMS

    We don't have an LMS at this time.  However, we would like know if the user completed the quiz.  Any suggestions on what we can do?  Would it be javascript?
    Thanks!

    Hi!!
    You could try using the Internal Server for hosting the content and Quiz Result Analyzer to pull the result.
    This would allow all the users (in the same domain) to post the result of their course to the internal Server.
    What this to learn how to implement it :--http://tv.adobe.com/watch/publish-and-track-results/reporting-using-lms-or-internal-server /
    Thanks,
    Anjaneai

  • My ipod is completely frozen without me locking it please help!

    I tried to plug my ipod into itunes for new music and all of a sudden its completely frozen it wont turn off, none of the controls work and my computer stopped reading it. Is there anyway to reset it or at least unfreeze it?

    next time this happens, simply hold the menu and select buttons for six seconds until the apple logo appears. This is how you restart it

  • Check Printing is completed normal without output

    Hi,
    I am Anton. I have designed my own Check Template and registered in XML publisher responsibility sucessfully.
    1. I can preview the output from Tempate page.
    2. I have attached my custom template to the standard program Format Payments (Standard Oracle) using System Administration>> Concurrent >>program >> Onsite Setting
    3. when i make payment through payable manager >>Payment batches >>
    It made the payment and completed normal.
    4. when you click on the output button from the submitted request format payaments, it shows unable to find the published output for this report.
    5. from details button, I noticed that the template is not picked up while running this request.
    please let my know if i miss anyhting or any other setup required to attach the template to the concurrent program
    Regards,
    Anton

    Hi
    Any luck on this Issue?
    Is there another same threat ....if yes pls give link
    pls help us
    Rahul

  • How do I make my iMac screen completely black - without sleep or turning it off?

    I have somebody sleeping in my office who finds the light from my iMac disturbing, even when it's turned down to the lowest level.
    Is there an easy way, just for a few days, to make the screen completely black at night - I don't want it to sleep or to switch it off so I can use it early in the morning remotely.

    What you are suggesting, puts the computer to sleep. just what fusbariclation does not want to do. He/she just wants to put the display to sleep.
    On my iMac, my Macbook Pro, my Wife's Macbook Air and her Macbook Pro the Control-Shift-Eject just turns off the screen, but the iMac continues to run, which if very important for me, as my iMac is a web server for the rest of my team at work.  I generally hit Control-Shift-Eject as I'm leaving the office every night.
    HOWEVER, since the OP (Fustbariclation) wants to access the iMac remotely, and wants the screen to be blacked out during the remote access so it will not disturb the guest in the same room with the iMac, my Control-Shift-Eject does not work for the OP.  I missed that essential tidbit in the original problem description.
    Other contributes have come through with working solutions for Fustbariclation

Maybe you are looking for