Component for an installation with steps

I need to make an installation that is in a few steps and show result and feedback to user for each step.
I think of a screen, canvas or panel with a thread.
Do you have any ideas or examples?
I do not need installshield!
This is a small install when the java program has already begun.
Best Regards
-M

Jprogress bar is not enough.
I need a screen/panel and to write to it every step that is going to be performed.
It seems I cannot avoid a thread too.
.M

Similar Messages

Error: the QueryInterface call on the COM component for the interface with IID '{00063033-0000-0000-C000-000000000046}' failed due to the following error: Library not registered.

I have a outlook 2007 plugin created in VS 2008 that reads calendar meetings. This plugin also works with outlook 2010. I used to debug this application from VS 2010 as well.
Last month, I installed Office 365 to test something. Later I uninstalled this version but after that my plugin application is crashing, every time a new appointment/meeting is created in calendar.
I get the below error:
Unable to cast COM object of type 'System.__ComObject' to interface type 'Microsoft.Office.Interop.Outlook._AppointmentItem'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{00063033-0000-0000-C000-000000000046}'
failed due to the following error: Library not registered. (Exception from HRESULT: 0x8002801D (TYPE_E_LIBNOTREGISTERED)).
Tekriti Software

Thanks for your sharing and have a nice day.
Yoyo Jiang[MSFT]
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Sysidcfg file for unattended installation with proper IP addressing

Hi,
I've been running jumpstart installation for several Sunfire V210 and V280Rs. I did use the following sysidcfg file but it's complaining regarding NOT finding Jumpstart Directory and subsequently fails to comply with rules file. Though the ./check verification did gave me a okay signal but the [I guess] ip addressing/subnet mask scheme is causing trouble. I'm in the same subnet. I happened to google a lot on this, almost everyone had problem with ip addresssing and subnet mask. With this current sysidcfg, the system prompted for default route, for once!
Can someone please share a working sysidcfg file for an unattended installation?
# my current sysidcfg file
system_locale=en_US
timezone=US/Central
terminal=sun-cmd
timeserver=localhost
root_password=test
network_interface=bge0 {netmask=255.255.0.0
protocol_ipv6=no}
security_policy=none
name_service=none
Initially I was using following directive; it couldn't find the jumpstart directory. I even tried removing "default_route", didn't help much.
network_interface=bge0 {hostname=test1
 default_route=10.1.1.253
 ip_address=10.1.1.1
 netmask=255.255.0.0
 protocol_ipv6=no}
Here is my log ...
Starting Solaris installation program...
Searching for JumpStart directory...
Using rules.ok from blade150:/opt/jumpstart.
Checking rules.ok file...
Using profile: profile
Executing JumpStart preinstall phase...
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"... <--- Somewhere here it prompted for default route.
Begin script install_begin execution completed.
Processing default locales
- Specifying default locale (en_US.ISO8859-1)
Processing profile
- Selecting cluster (SUNWCXall)
Installing 64-bit Solaris packages
- Selecting locale (en_US.ISO8859-1)
- Selecting all disks
- Configuring boot device
- Configuring / (c0t0d0s0)
- Configuring swap (c0t0d0s1)
- Configuring /mirror (c0t0d0s3)
- Configuring /usr (c0t0d0s4)
- Configuring /var (c0t0d0s5)
- Configuring /opt (c0t0d0s6)
- Configuring /export/home (c0t0d0s7)
- Deselecting unmodified disk (c0t1d0)
Verifying disk configuration
Verifying space allocation
- Total software size: 1363.53 Mbytes
Preparing system for Solaris install
Configuring disk (c0t0d0)
- Creating Solaris disk label (VTOC)
<snip>
After that all worked fine.
In case should you need to see my /etc/bootparam file, here it is ..
# /etc/bootparam
test.testserv.org root=blade150:/opt/jumpstart/Solaris_9/Tools/Boot install=blade150:/opt/jumpstart boottype=:in sysid_config=blade150:/opt/jumpstart install_config=blade150:/opt/jumpstart rootopts=:rsize=32768
Can you please highlight what went wrong?
TIA
Raqueeb Hassan
Bangladesh

Heres the sysidcfg file we use
system_locale=en_AU
terminal=vt100
security_policy=NONE
name_service=DNS {domain_name=anu.edu.au name_server=150.203.1.10,130.56.4.1 search=anu.edu.au}
network_interface=bge0 {hostname=talwood ip_address=130.56.64.131 default_route=130.56.64.1 netmask=255.255.255.0 protocol_ipv6=yes}
timeserver=localhost
timezone=Australia/NSW
But it appears similar enough to what your using. But I can assure you that it works correctly.

Is there a Component for rendering images with Absolute URLs?

I would like a component like <h:graphicImage> that would accept absolute URLs instead of relative ones. Does such a beast exist or should I write one myself?
Note, I'm looking for a component because I want the image to appear in a table and the URL changes for every row. If I just handcode a <img> tag in the <h:column> tag, it doesn't get rendered for every row.

<h:graphicImage> can use absolute URL.

Independent Storyline's for video installation with two projections

Hi Community,
I work on a project where I wish to have two videos played on two different Projectors.
During the process of making them I wish to synchronize them and finaly make two different independent exports from them (somehow like two synchronized Projects)
Any ideas how to do that. I thought about something like independet Storylines. Like that I could make both video-sequences in one project and synchronize them in the timeline and treat them at the end like two independent movies (projects). How can I do that?
Thanks a lot for any answer!

Create the first edit in the Primary Storyline.
Create the second monitor edit in a Secondary Storyline above it.
Select the first clip of the Primary Storyline, resize to 50%, move to the bottom right corner, copy that clip.
Paste Attributes to the rest of the clips in the Primary Storyline for size and position.
Do the same for the Secondary Storyline, except move it to the top left.
Select the first clip in the Prim Storyline, shift-click the last clip, assign the Video role of "Projector 1".
Select the first clip in the Secondary Storyline, shift-click the last clip, assign the Video role of "Projector 2".
When done with the full edit, slect all and reset the Transform section in the Inspector.
Export each Role seperately for each projector.

Installation with DELL PE1400

Is there anyone here able to install the Solaris 7 Intel Edition successfully to the DELL PowerEdge 1400 machine?
I found out that DELL PE1400 is in the Solaris 7 HCL but I was unable to make it running. It always generate a boot error after the installation. eg. (i) too many active sources (ii) short read (iii) unable to locate /etc/bootrc
Help!

> Is it possible to install SAP instance with Remote Database and is there steps to be followed for SAP installation with Remote Database.
You have to specify the remote database server name when sapinst ask you about the database. This should do the trick.
Markus

No Disk meet the criteria for Solaris installation

Hi all, I have a problem when trying to install Solaris 8 (Intel) on my PC. There are some funny things happened while installing the OS.
1.) My motherboard does not support booting from CD-ROM, so I downloaded a Device Assistant Boot Disk to boot it up. Then I use dd.exe to make the boot disk from the image, I have tried many times that after creating the boot disk, this boot disk will contain 512 bytes of bad sector. So why?
2.) After using this boot disk to boot up and install the OS, before entering to the detection of the bus type stuff (still on the white screen), at the bottom of the screen, it says "ata_command select failed ... ...", what does this mean?
3.) When the system go back to the white screen with language selection, I choose English (which is 1), and the system try to find my hard disk, but it failed and says "No Disk meet the criteria for Solaris installation" with a new line saying "installation documenation found.". So what is happening?
Appreciate for any help.
Wallace

Did you check that your adaptec scsi controller is
supported by solaris and/or has a working driver
(from sun or adaptec) ?
Here's the HCL for solaris 8 x86:
http://soldc.sun.com/support/drivers/hcl/8/401/BOOK.htm

Sapinst stops with error while installing ess component for Java AS

Dear experts,
I really hope you can help me with this one,
We are installing a ABAP/Java AS development system and sapinst has gone through 75% of all execution tasks nicely,
but then stopped with error while deploying components for the Java AS:
ERROR 2009-03-30 13:01:27
CJS-30156 SDM deployment failed for at least one of the components to deploy. SOLUTION: Check 'C:\Program Files/sapinst_instdir/ERP/SYSTEM/ORA/DISTRIBUTED/AS/CI/callSdmViaSapinst.log' for more information.
ERROR 2009-03-30 13:01:28
FCO-00011 The step enableUsageTypes with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|15|0|enableUsageTypes was executed with status ERROR .
Any help would be really appreciated as I am stuck with this and dont seem to be able to find any information on this one.
Thanks a lot for your help in advance.
Here is the crucial part of callSdmViaSapinst.log:
Mar 30, 2009 12:55:18... Info: Starting: Initial deployment: Selected development component 'ess/bp_ess'/'sap.com'/'MAIN_ERP05VAL_C'/'788220'/'0' will be deployed.
Mar 30, 2009 12:55:18... Info: SDA to be deployed: D:\usr\sap\DE1\DVEBMGS00\SDM\root\origin\sap.com\ess\bp_ess\MAIN_ERP05VAL_C\0\788220\sap.com_ess~bp_ess.sda
Mar 30, 2009 12:55:18... Info: Software type of SDA: J2EE
*Mar 30, 2009 12:55:18... Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) ******
Mar 30, 2009 1:00:21 PM Info: Begin of log messages of the target system:
*09/03/30 12:55:19 - ************************************************************
09/03/30 12:58:07 - Start updating EAR file...
09/03/30 12:58:07 - start-up mode is lazy
09/03/30 12:58:08 - EAR file updated successfully for 578ms.
09/03/30 12:58:08 - Start deploying ...
09/03/30 12:58:42 - EAR file uploaded to server for 30641ms.
09/03/30 13:00:20 - ERROR: Not deployed. Deploy Service returned ERROR:
 java.rmi.RemoteException: Cannot deploy application sap.com/ess~bp_ess..
 Reason: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception during deploy: Failed to deploy archive D:\usr\sap\DE1\DVEBMGS00\j2ee\cluster\server0\.\temp\deploy\work\deploying\reader1238414327258\sap.comessbp_ess.epa
 The following objects could not be locked: [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess**.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.mx/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.de/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.id/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.jp/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.de/com.sap.pct.erp.es

Thanks Désirée for your answer and apologies for the late update on this one.
This issue is resolved now, the reason for the error was a lack of memory which probably triggered a timeout in sapinst. After upgrading the memory to 7GB and re-starting the ABAP+Java AS and resuming sapinst everything went through fine. However, this was hard to spot because the logs wouldn't tell you about the lack of memory but about everything else!
regards,
Manfred

Steps to create a SOLMAN key for NW2004s installation in AIX Machine

I have installed a SOLMAN in a Windows system
I need to install SAP NW200s in a AIX Machine.
Pls let me know the steps to create SOLMAN key for the installation.

Hi Balaji,
Before doing the steps said by Kanthi, you have register that system. Please follow the steps to do:
SMSY>Server>Create new system with assistant
Here you have to specify the details like System ID, Instance number etc.,
Then follow the steps:
System Landscape>other object>Specify the System ID(Which you have registered as i said in the provious step)-->select the generate key icon.
Hope it is helpful for you!!
Thanks & Regards,
Santhosh P

Installation Error for 2004s SR1 At Step Create User PIREPUSER

Hello,
I'm installing 2004s SR1 and I'm at step 62 and when it tries to create the PIREPUSER account, this is the error I get:
ERROR 2006-08-23 14:46:44 [iaxxejsbas.cpp:178]
 EJS_ErrorReporter
FJS-00003 TypeError: this.getSystemInfo() has no properties (in script
NW_Onehost|ind|ind|ind|ind, line 12941: ???)
ERROR 2006-08-23 14:46:44 [iaxxgenimp.cpp:736]
 showDialog()
FCO-00011 The step CreateUser with step key
|NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind
|ind|ind|5|0|NW_Usage_Types_Configuration_PI|ind|ind|ind|ind|1|0|GenericNew
CreateAbapUser|ind|ind|ind|ind|1|0|CreateUser was executed with status
ERROR .
TRACE [iaxxgenimp.cpp:657]
 showDialog()
<html><head></head><body>An error occurred while processing service
SAP NetWeaver 2004s Support Release 1 > SAP Systems > MS SQL Server >
Central System > Central System Installation. You may now<ul>
<li>press Retry to repeat the current step.</li> <li>press the
View Log button to get more information about the error.</li>
<li>stop the task and continue with it later.</li></ul>Log files are written to D:\Program
Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS.</body></html>
TRACE [iaxxgenimp.cpp:1093]
 showDialog()
waiting for an answer from gui
INFO 2006-08-23 14:55:53 [iaxxgenimp.cpp:787]
 showDialog()
An error occured and the user decide to stop.\n Current step
"|NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|in
d|ind|ind|5|0|NW_Usage_Types_Configuration_PI|ind|ind|ind|ind|1|0|GenericNe
wCreateAbapUser|ind|ind|ind|ind|1|0|CreateUser".
The funny thing is that in the previous steps when it created users and called RFC_SYSTEM_INFO, there was no problem. Only when it gets to this User.
Note that before the FJS-00003 error, the line before it in the trace file stated "RFC Connection closed." This is for one of the successful BAPI_USER_CREATE1 calls it had made.
Please help if you can...I want to desperately to complete the installation.
Many thanks,
Mike

Hi Mike
Am also facing exactly the same problem with PIAPPLUSER....Desperately waiting to complete this installation,Please help me how you deleted the user table entires where did u do it?

Steps for **SUCCESSFUL** installation of 11.5.9 on Windows

After a lot of effort (formatted the hard disk 5 times and installed everything from scratch ; Searching for 10 hrs on metalink and google ) of trying to figure out the "JSP not responding " problem, I sort of figured out the problem with help from my friends who work at Oracle..
Here are my steps.. (my Environment is Win 2000 Professional with SP4 on a Dell SC400 Pentium 4, 2.4GHz with 1.2G Memory and 120 GB hard drive)
***Made sure that there are no spaces in the directory structure. Also restarted machine after install of VC++ , jdk and Domain name information insertion in hosts file***
1) Installed MKS toolkit (Version 7.0 - I had a trial version)
Installed directory is C:\MKS
2) Installed VC++ 6 from Microsoft Visual Studio CD to c:\MVS (where MVS stands for Microsoft Visual Studio) and applied service pack 5
I read some metalinks where they copied the link.exe file that is in the C:\MVS\VC98\bin folder to c:\winnt\system32 folder.. I did the same for good measure
**** RESTARTED MACHINE****
**NOTE:: RapidWiz asks for MSDev directory during install ( it defaults to C:\VC98).. but during the VC++ install , the environment variable that VC++ sets for MSDev directory is C:\MVS\Common\MSDev98.. (On a Dos window, type "set" )So during install, I set the MSDev directory in RapidWiz to C:\MVS\Common\MSDev98 NOT TO C:\MVS\VC98 **
3) Downloaded make-3.79.1 (NOTE .. This is the only version that is certified to work) unzipped it to C:\ and ran the build_w32.bat file.. Had to run it twice to get the gnumake.exe file in the WinRel folder . I copied it to c:\MKS\mksnt folder
4) Downloaded jdk1.3.1_09 from http://java.sun.com
PLEASE NOTE THE VERSION # and build!! _09!!
Installed it to c:\jdk13 ** Also note that there is no "." in the directory name as specified in the installation instructions by Oracle***
Set Classpath = .; in the environment variable and also added the c:\jdk13\bin to the PATH variable.
**RESTARTED MACHINE!**
5) i)created applmgr, oracle users with Administrative rights..
ii)Made an entry 127.0.0.1 omega.xyz.com
(where omega is my machine name and xyz.com is a **fictitious** DNS domain name) in c:\winnt\system32\drivers\etc\hosts file
iii) Changed the Virtual Paging Memory to 4000 M on both hard drives on my machine( Right click on "My Computer" , go the advanced tab and then Performance Options and change the Virtual Memory settings
iv)Also, Go to Network - > Local Area Connection -> right click Properties -> click TCP/IP properties -> advanced -> click DNS tab -> enter DNS suffix for this connection as your domain (xyz.com)
**RESTART MACHINE **
6) I copied all the CD's to the Staging folder and started RapidWiz.. I chose d:\oracle as the installation directory!! I installed the Vision Demo and it sort of took 12 hrs..
****MOST IMPORTANT STEP****
During the installation, somewhere during Step 4 of 5 , the files for Jserv are unzipped to d:\oracle\visdora\iAS\Apache\Jserv\
Go to the "etc" folder and open jserv.properties (not jserv.conf)
At the very beginning there is an entry "wrapper.bin" which points to the java executable..
SURPRISE SURPRISE!!! The value that it contained was
wrapper.bin = c:\jdk1.3.1\jre\bin\java.exe !!!
It was supposed to have jdk13 ..And that's why JServ doesn't start up and we get the JSP not responding error!!
CHANGE THE VALUE TO CONTAIN THE CORRECT PATH AND SAVE FILE!! (THIS IS BEFORE STEP 5 of 5)
wrapper.bin =c:\jdk13\jre\bin\java.exe
IF YOU MISSED setting this value (you cannot be around the machine all the time :-) ) and the post installation
steps are executed by RapidWiz with JSP not responding error , Go to the Services from Start->Settings->Control Panel ->Administrative tools ->Services , locate the Oracle HttpServer service, stop it , make changes to the jserv.properties file as outlined above and restart the HTTP Server . Wait for 2 minutes and hit Retry on the RapidWiz window and your system would pass the JSP Test!!!
Phew!! Hope this helps .. Please follow the instructions above.. Read them atleast 2 times ( I just want to save you the pain of installing a second time :-) ) before you install
Cheers
-Srinath

I installed oracle apps 11.5.10.2 using steps given in thread and I didnt have any problems. I then installed it on my friends laptop and it worked fine. but recenly it stopped working in my laptop, i was not able to open login page from main url (http://www.msb.ora:8000) it gave error : page cannot be found
So i reinstalled it on fresh system again.. but since then it not working. I have tried atleast 9-10 times and everytime it ends up with same error "jsp is not responding", I am able to open the rapid install main page but I am not able to open login page. it says page cannot be found. i followed all the steps suggested by you guys in this thread to solve this error, but still have no luck.
I have tried following steps to solve the issue
1) As its recommended to installed apps on fressh os without jdk i did the same, as i didnt worked i tried installation with jdk preinstalled,
2) i have tried on both windows server 2003 and win xp professional
3) I tried to change the jdk path in jser.properties file
I will really appriciate any help to solve this problem. Below is system details:
os: windows server 2003
ram : 1gb
processor: 1.83ghz core 2 duo
Oracle apps 11.5.10.2
java version: 1.4.2_04 ( installed by rapidwiz)

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

URGENT :: STEPS For De-installation of SAP R/3 4.7

Hi ,
can anybody tell me what are the STEPS For De-installation of SAP R/3 4.7
Points will be rewarded .
Regards ,
AMber S

since when de-installing SAP is urgent?
uninstall SAP: D:\usr\sap\PBW\SYS\exe\uninstsap.exe
uninstall Oarcle: Start -> program -> oracle - SID -> Oracle installation products -> universal installer... choose uninstall.
or better yet:
format c:

I am confused by the installation step that requires you to create a bootable USB drive for windows installation. What is the ISO image and why has it selected my Passport backup drive as the destination disc?

In the bootcamp installation it asks me to create a bootable USB drive for Windows Installation. To do so, I must choose an ISO image. What is that? When I click "choose" I don't understand the options presented. Is this the destination of the partition or where Windows will reside on the Mac? Why does it also indicate the the destination disk si my WD Passport Back up drive?

OK, so I have an apple superdrive hooked up to my mini (along with my Passport back up drive). I also have the discs for both 64bit and 32bit Windows along with the product key. I am still not sure what to do when faced with the options after "choose".

I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-

Hi, everyone.
I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-
after running get-OWAVirtualDirectory or test-OWAConnectivity i'm getting a message that says "OWA it's Orphan, No Metadata information can be found."
I only have the OWA users impacted.- anywhere users, and ActiveSync are working well.-
Thanks,
Fabian Alberto Campo
MCT-MCSA 2012-MCITP365-MCTS
Fabián A. Campo H. Consultor tecnico @ IXO Ltda. MCT MCP MCTS MCSA HP-APS Cra. 67 No. 167 – 61 of 303 Bogotá, Colombia

Hi Fabian,
Is there any error code when user access their mailbox on OWA. Please confirm if there is no results returned in EMS when you run Get-OWAVirtualDirectory cmdlet. Also check whether there is any Event Logs related to OWA in Exchange.
In IIS manager, make sure the OWA virtual directory is listed in the Default Web Site. In EMC, we can navigate to Server Configuration > Client Access, select server and turn to Outlook Web App tab. Then we can click Reset Virtual Directory in the right
Actions pane to reset OWA virtual directory.
Additionally, please restart IIS service by running iisreset /noforce from a Command Prompt window.
Regards,
Winnie Liang
TechNet Community Support

Component for an installation with steps

Similar Messages

Maybe you are looking for