Component in Multisim

Hi guys,
I just started learning in Multisim.  I tried to add a 4011 and 4017 CMOS Gate into my circuit, but I don't know how to connect VDD and GND to the ICs.  Because there are only input and output pins.  I also wonder that if I can enlarge the 4017 itself on my schematic diagram.  I know how to increase the zoom of the entired schematic.  Please advise, thank you.
Harrison
Solved!
Go to Solution.

You don't have to wire up the power on digital IC's. The Power pin are hidden and the only thing you have to do is place VCC,VDD, VSS or DGND on the schematic and the IC's will be automaticlly hooked to them in the background (you won't see any physical connections).
For the second question. The only way I know of to do this is to edit the components symbol in the Symbol Editor. Double click on the component and goto the Value tab and you will se where it sys to "Edit  Component in Database" Click that and it will take you to a new dialog box. Select the tab "SYMBOL" then you will see down below where it say "EDIT" From here you will enter the symbol editor and can edit the component symbol however you like.
I would suggest reading the Multisim Manual about the symbol editor to familiarize yourself on its operation. I don't use it that much and would have to review this myself.
I hope I have helped.
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day

Similar Messages

  • Creating a custom component in multisim using *.lib and *.olb files

    i have  *.lib and *.olb files for a pspice model. which file i have to you while creating a custom component in multisim.

    Hello,
    Thanks for your question. In order to create simulatable custom components in Multisim you need a SPICE model (Multisim can also understand PSpice Models). The file format for SPICE model can be different according to the manufacturer, for instance: *.cir, *.lib, *.llb. At the end of the day these files are text files that you can open with a text editor, therefore, you can simply copy and paste the model in Multisim.
    Here are two good resources on component creation:
    Component Creation 101
    Creating a Custom Component in NI Multisim
    When you reach the step where you need to enter the SPICE model, simply open the *.lib or *.olb file with a text editor, and copy and paste the model.
    Hope this helps.
    Fernando D.
    National Instruments

  • How can I create new 3D component in Multisim

    请问一下可以在Multisim中创建完全三维的虚拟元件吗
    那个元件要任意方向都可以旋转
    如果可以    要采用什么方法
    要采用什么编程语言
    谢谢高手指点
     could I create new 3D component in Multisim?
    the new 3D component could rotate in any direction
    if it could be realized
    which program language should I choose
    how should I create 3D component
    thanks

    There is a tutorial here: http://zone.ni.com/devzone/cda/tut/p/id/5631 for creating a new component. There is a section for creating a 3D model that may be helpful. http://zone.ni.com/devzone/cda/tut/p/id/5631#toc8

  • Where is Inclusive OR (IOR) component in Multisim?

    Hello,
    I am trying to search component in Multisim 13 which stands for inclusive OR logical component - Inclusive or or IOR has logical 1 where all variables are the same all 0 or all 1...
    Can you help me find the name of this component? Thank you.
    <script src="chrome://hdv/content/hdv.js" type="application/javascript" charset="UTF-8"></script>

    From the description of the operation of this gate, it sounds like an ex nor gate such as the 74LS266. This gate is not in my educational version of multisim but may be in another version. The IOR gate of which you speak is the same as an ordinary OR gate.

  • I need the SPICE Model for MC145106 or the component in Multisim. Please

    I need the SPICE Model for MC145106 or the component in multiSIM. Please!

    Hi,
    As you can see in this link the part is longer manufactured and it does not have a replacement.
    In terms of functionality, you can try using the component PLL_VIRTUAL in Multisim to replace it in a high level simulation or create a new component of a replacement that you have the SPICE model of.
    Let me know if you need any help.
    Mahmoud W
    National Instruments

  • Is there a photo voltaic power source component for multisim 11?

    i am looking for a component for a photovoltaic cell source.does multisim 11 have anything like this.

    the best explination of the curcuit equivalent of a photo(solar cell) seems to be found in wiki
    solar cell perameters to out put current and voltage
    I = output current (amperes)
    IL = photogenerated current (amperes)
    V = voltage across the output terminals (volts)
    RS = series resistance (Ω).
    I0 = reverse saturation current (amperes)
    n = diode ideality factor (1 for an ideal diode)
    q = elementary charge
    k = Boltzmann's constant
    T = absolute temperature
    RSH = shunt resistance (Ω)
    then the edffected based on physical size of the cell
    J = current density (amperes/cm2) 
    JL = photogenerated current density (amperes/cm2) 
    J0 = reverse saturation current density
    (amperes/cm2) 
    rS = specific series resistance (Ω-cm2) 
    rSH = specific shunt resistance (Ω-cm2).
    not sure if this helps i will check with my professor on this matter as well.

  • IIs there any way of loading in a MM54C221J component into multisim with out having to use the component wizard?

    Im trying to use a MM54C221J multivibrator in multisim, but it's not in the library.
    Does anyone know if I can get hold of one with having to use the component wizard?
    Many thanks 

    Hello GFear,
    There are several sources for components that aren't native to multisim.
    You can directly contact the manufacturer of the component should they have the multisim model available.
    You can also search the web incase another user has created the component.
    I have searched for the MM54C221J and have not found one available online.
    If you are having trouble using the Component Wizard here is a useful link that breaks down each of the steps.
    To create a component you will need a spice model of the component which you should be able to acquire from the manufacture.
    http://zone.ni.com/devzone/cda/tut/p/id/3173
    I hope this helps.
    Regards,
    Philip
    Applications Engineer
    National Instruments
    UK Branch
    ===If this fixes your problem, mark as solution!===

  • THS7530 component in multisim error

    I've recently attempted testing out the Texas Instruments THS7530 in multisim.  After experiencing difficulties getting a signal output from the suggested test circuit in the device datasheet I inspected the device model.  It is in fact the same model (created 11/26/02) that is printed on the device datasheet.  This model only features 8 pins from the 12 functioning pins on the device.  It misses the Vg- pin suggesting it is tied to ground, it missing the PD (power down) pin suggesting this is constantly on and finally missing the Vclamp pins (which in the datasheet model suggests this function is not modeled).  However in the model schematic the device symbol has all 12 functioning pins accusable.  Am I missing something form the multisim model that allows these device functions that are missing from the datasheet model?  
    I am still yet to obtain any signal outputs from the multisim database model however when loading the datasheet model onto a custom component I'm achieving an amplified output.  The output however is being harshly clamped to 3.5Vpk-pk for any input signals exceeding 300mVpk-pk (At a Vgain level of 0.5V and Vocm at 2.5V).  This is contrary to the quoted input signal range of the device ranging from -Vs to +Vs.  I'm assuming this is the un-adjustable clamping level of the model having an effect, is there any way I can adjust this to provide amplification for a 2V pk-pk input signal without getting clamping effects?
    Many thanks,
    Robert

    Hello Robert,
    Thank you for your post. I have a few questions that will help me in understanding your problem better.
    Did you find this device in one of the built in Multisim libraries or did you import it?
    If you have imported it where did you import it from?
    When you made your custom device did you follow all of these steps: http://www.ni.com/white-paper/3173/en
    Can you make a very basic simple circuit that demonstrates the error and send it to me.
    Many thanks, 
    Mahdieh G
    Applications Engineer
    National Instruments UK&Ireland

  • I need the SPICE Model for DS1809 or the component in Multisim. Help mee!

    Hey people, I need the SPICE Model for DS1809 (Digital Potentiometer) for Multisim. Does anybody have this?? Or any idea where to get. I searched for, but I coudn't find.
    Thank you

    Hi,
    As you can see in this link the part is longer manufactured and it does not have a replacement.
    In terms of functionality, you can try using the component PLL_VIRTUAL in Multisim to replace it in a high level simulation or create a new component of a replacement that you have the SPICE model of.
    Let me know if you need any help.
    Mahmoud W
    National Instruments

  • I need the ISO124 SPICE Model, or the component on Multisim. Can anyone help me?

    People, I need the ISO124 model. Does anybody know how I can find it??
    Thank you soo much! 

    Hi,
    The SPICE model for the ISO124 is not available by the manufacturer. You can try contacting them and make a request for the model, sometimes they provide it upon a customer request.
     Mahmoud W
    National Instruments

  • Problem finding chip in Multisim

    Greetings,
    Straight to the point. I got trouble finding specific chip in Multisim. The only thing known about this chip is this : SN7465, following with 4AND-2AND-2AND-OR-NOT elements. Am I missing something, or do I have to figure out something else about the information provided to find it out? Because when I search for it, I don't find anything and I need it to test it's logical circuit. Thank you in advance for your time.

    Dear WaitForIt
    First of all, let me Welcome you to the NI forums. I am looking forward to help you out now, and hope you will become the part of our community in the future.
    There is a forum post by one of our collegue who even made a video about how to add a custom library component to Multisim. In Multisim there is only a number of preset SPICE models which you can work with, but you are free to add any User libraries found on the network.
    http://forums.ni.com/t5/Circuit-Design-Suite-Multisim/LM386-not-included-in-Multisim-11-0-1/m-p/1432...
    I can not provide the spice model for such a component as not all SN74xx ICs are modelled. It is possible that you have to contact a supplier and ask for a simulation model for yourself.
    For example TI has their simulation modells freely available for use at their homepage. 
    I hope this helped you to start going. I am unfortunately not able to provide you the exact model, but I highly recommend you to look around for open spice models or contact a provider.
    Best regards,
    Peter
    Peter L.
    National Instruments Hungary
    Applications Engineer

  • How to measure torque on a DC motor using Multisim?

    Hello,
    I would like to know how we measure torque on a DC motor using Multisim Education edition.
    I've searched for the component, "eddy current load brake", but could not find it. Is that component in Multisim?
    Thank you,
    Neil

    Hi,
    Please refer to this forum post.
    http://forums.ni.com/t5/Circuit-Design-Suite-Multisim/PM-DC-Motor-Model-Trouble/td-p/1931859
    Hope this helps.
    Regards,
    Tayyab R,
    National Instruments.

  • Where can I get CD4047 or its match in Multisim 12?

    where can I get CD4047 or its match in Multisim 12?
    I am designing an INVERTER circuit in MULTISIM COMPONENT EVALUATOR 12.0 software.
    but on doing so I can't find the IC (Integrated circuit) CD4047. I have tried to search CD4047 match component (can replace it) on the internet but not found?
    1. What can I do or how can I replace its Match component?
    2. In future when I design in Multisim, when I coudn't get components in the data base of MULTISIM, what solutions can you give me?
    Hoping to get from your Answers
    Thank you!  

    Experts,
    There is the CD4538 which I believe is a similar chip (its dual - so you get 2).  
    1. If you locate the CD4047 model online, or you can use 1/2 of the CD4538, you can use the Component Wizard to import a custom component into Multisim.
    2. There are various techniques to get models/parts into Multisim.   If you can find an equivalent model you can use you can create a part using the Component Wizard.   There are various SPICE modeling marco modeling techniques for creating models, but the complexity depends on the type of part and how much detail you need from the model.   The best method is to locate the SPICE model from the manufacturer and follow our Component Wizard steps to import the new model into a Multisim part (usually with the most challenging step being the symbol - spice model mapping).
    - Pat N

  • How to create a new component using SPICE?

    People, I don't know how to create a new component using SPICE.
    I know that it's possible to create a new component and use a SPICE code, but I don't know how to do this very well, and I need the TI ISO124 (Isolation Amplifier), and I have no idea on how to do that. Can somebody help me? I need to develop a layout.
    Thank you!!

    Hi,
    Here is a tutorial that explains in details how to create your own component in Multisim using a SPICE model.
    Hope you find it helpful,
    Mahmoud W
    National Instruments

  • Using labview cosimulation, how to control PWM duty cycle in multisim

    I am new to using Multisim with LabVIEW using cosimulation. I want to ask if there is a PWM component in Multisim that can have its duty cycle be controlled using LabVIEW? I have an algorithm in LabVIEW that outputs duty cycle values from 0 to 1, representing duty cycle percentages.
    How do I control the PWM duty cycle in Multisim using LabVIEW cosimulation?
    Many thanks,
    SPECTRE
    Solved!
    Go to Solution.

    Hi Spectre,
    In Multisim, search for the parts base on functionality, there are some PWM models in the database.  Have a look at this knowledge base  if you don't know how to search for parts:
    http://digital.ni.com/public.nsf/allkb/7309A5CABC677296862577ED006EC99E
    Aslo, have a look at this knowledgebase:
    http://digital.ni.com/public.nsf/allkb/EF391C48CF71AE4F862571B900644F84
    This article shows how you can get Mutlisim and LabVIEW to co-simiualte:
    http://www.ni.com/white-paper/13663/en
    I hope this helps
    Tien P.
    National Instruments

Maybe you are looking for