Component Status not updating since upgrade from SCCM2012 SP1 CU3 to SCCM2012 R2

Since upgrading to SCCM2012 R2 three days ago, in the Configuration Manager console when we go to Monitoring > System Status > Component Status and view the status messages for any component, there are no entries since the time of our upgrade. All
components are this way.
I've checked the logs and information is flowing through them and everything else seems to be running smoothly, but there are no updates to items in Component Status. There was only one warning in the R2 prereq checker, the ConfigMgrPrereq.log shows:
<11-08-2013 15:33:30> ERROR: Site server does not have create child permission on AD 'System Management'
<11-08-2013 15:33:30> WARN: Site server does not have delete child permission on AD 'System Management'
<11-08-2013 15:33:30> [primary site server]; Verify site server permissions to publish to Active Directory.; Warning; The site server might be unable to publish to Active Directory. The computer account for
the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have manually verified these permissions. For more information about your options to configure required
permissions, see http://go.microsoft.com/fwlink/p/?LinkId=233190.
I have confirmed via ADUC and ADSIEdit that the primary site server computer account does have full control over the System Management container.
We are running a single site server with separately hosted site database server and several remote distribution point site systems. Any help would be greatly appreciated.

Problem solved!
I was looking in the statmgr.log file and spotted an error about a bad SQL transaction. Some searching on this lead me to this Microsoft KB article: http://support.microsoft.com/KB/884123. Even though it is for SMS2003 it lead me to check the
\inboxes\statmgr.box\retry\ folder and sure enough there were ~5100 .sql files waiting. As per the instructions in the document, I stopped the SMS_EXECUTIVE service, deleted the oldest .sql file and then restarted the service. The file count in
the \Retry\ folder is dropping and status messages are flowing. I now just have to wait for the 6 days of status messages to process.
Thanks everyone for your assistance :)

Similar Messages

Layout Status not updated following upgrade of RH5 project to RH7

I have over thirty RH5 projects to upgrade to RH7 with two
layouts for each: Microsoft HTML Help (Primary Layout) &
Printed Documentation.
While upgrading the first project I noticed that running the
File > Batch Generate... option following the upgrade does not
update the layout Status to "Generated". I found out that the
layout files are actually updated but the Status still shows as
"Out of date".
Running File > View Primary Layout (after running the
Batch Generate) displays the message, "Microsoft HTML Help output
is out of date. Would you like to compile before running?" with
Yes, No and Cancel options. Clicking the Yes button generates the
Primary Layout again, but this does not update the layout Status to
"Generated" either.
For the status of your layouts to be updated you must close
your upgraded project, reopen it & generate the layouts again.
I have spent much of this afternoon confirming the above
information, I hope that this posting saves you some time that
might be spent wondering why your layout status is not
updating.

You may need to stop all processes of the shadow instance that are running with the old limitations. I'd try the following:
ps -ef | grep sapstart
then kill the process of the shadow instance (check for the system number of the shadow instance to identify).
I'd also try to stop the instance first so all shared memory segments are cleared - and then try to manually start it:
cd <upgrade-directory/bin
./SAPup stopshd
./SAPup startshd
You may assign the user directly to the project but this won't be taken into account if the assignment is not set in /etc/user_attr.,
Markus

Podcasts not updating since upgrade to 11.3.1

I have iTunes store and non-iTune store podcasts and they all stopped updating after the upgrade to 11.3.1. Occasionally some would get a new episode, but not all the ones missed. I tried unsubscribing and subscribing to some of them, but it doesn't seem to fix the issue. Unsubscribing, deleting all episodes from iTunes and subscribing again worked for only one of the few I tried.
Hardware Overview:
Model Name: iMac
Model Identifier: iMac12,2
Processor Name: Intel Core i5
Processor Speed: 2.7 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 20 GB
Boot ROM Version: IM121.0047.B1F
SMC Version (system): 1.72f2
iTunes:
Version: 11.3.1
Obtained from: Apple
Last Modified: 8/8/14, 8:00 AM
Kind: Intel
64-Bit (Intel): Yes
I read some articles about issues like this when having an iPod connected to the computer, so I tried with the iPod connected and disconnected, but the problem persists. I started watching the Podcasts on VLC now and I can see all new chapters and updates no problem there. I might switch to another podcast manager, anybody has any suggestions?
Thanks,
-Andres.

Install the full .NET 4.5.1
"Client Profile" is not the full .NET 4.0
Rather a very small subset of .NET 4.0
Having seen the Lunacy of this concept, MS no longer even offers the
"Client Profile" version in current version of .NET 4
On 10/9/2014 5:26 AM, hfr63 wrote:
>
> We just went through a domain migration. All PCs were unregistered from
> the old ZCM 11.2 server in the old domain before they were migrated.
> When we went to re-register them to the 11.3.1 ZCM server, we ran into 2
> issues and one of them is being addressed here. The Windows 7
> Professional PCs running ZCM Agent 11.2 will not upgrade to 11.3.1. Get
> error message "cannot continue - Microsoft's .NET version 4 required.
> Exiting with error code -16". All the Win7 Professional PCs have the
> same build because we just migrated from XP to Win7 Professional about 3
> months ago and the hard drives were all ghosted from a master. All PCs
> have Microsoft .NET 4 Client Profile. Some of Windows 7 Enterprise PCs
> will upgrade to 11.3.1 but then we get an authentication error message
> with the ZCM 11.3.1 agent (this error is in another post). Other
> Windows 7 Enterprise PCs will not upgrade to 11.3.1 (mine is one of
> them). Gets the same error message as the Win7 Professional PCs. Any
> clues, hints, anyone see this issue before?
>
>
Going to Brainshare 2014?
http://www.brainshare.com
Use Registration Code "nvlcwilson" for $300 off!
Craig Wilson - MCNE, MCSE, CCNA
Novell Technical Support Engineer
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Order status not updated since Monday

I placed an order Monday morning. Since shortly after the order was placed, there has been no updates to the order status. Trying to figure out what is happening with the order.

Hi ebudsberg,
No need to worry! Based on available information, it looks like your order shipped sometime after you posted yesterday. When you can, I'd suggest double-checking both your inbox and junk mail folders for a confirmation message with tracking details.
Thanks for your patience!
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

Since upgrading from Windows Vista to Windows 7 both Internet Explorer and Firefox will not recognize the numbers keys of my keyboard. I get numbers in Word and every other situation, just not in the internet programs.

Since upgrading from Windows Vista to Windows 7 both Internet Explorer and Firefox will not recognize the numbers keys of my keyboard. I get numbers in Word and every other situation, just not in the internet programs. I have tried uninstalling Firefox and reinstalling with no results.

If there are problems with importing the IE Favorites in Firefox then export the favorites in IE to an HTML file and import that file in the Firefox Bookmarks Manager.
If you do not have the menu bar in IE then right-click the toolbar at the top to enable the Menu Bar.
*Export the favorites in IE to an HTML file (bookmarks.html):<br>File > Import and Export
*Import the HTML file in Firefox:<br>Bookmarks > Show All Bookmarks > Import & Backup > Import Bookmarks from HTML
See "Import from another browser" and "Import from file":
*http://kb.mozillazine.org/Import_bookmarks

Since upgrading from Lion to Mountain Lion, when I login 1 of 2 disk images I have set to open on login does not mount.

Since upgrading from Lion to Mountain Lion, when I login 1 of 2 disk images I have set to open on login does not mount. It worked under Lion. Stickies opens just fine. The disk images are sparse disk bundles. Are there any suggested remedies? I have already tried repairing permissions. One interesting thing is that previously in LIon, the disk images were just sparse images, not sparse bundles. I switched to bundles after reading that Time Machine backups of sparse bundles would not copy the entire image, only the changed parts. The sprase images are for sharing of photo and iTUnes libraries among multiple family member on the same computer.

If it is working as expected, what do you need with the old backup?
If you want to be able to go back to where you were prior to an upgrade, isolate that backup and don't use it again. As far as Time Machine can tell, the whole drive changed.
The link I posted contains probably everything that anybody knows about Time Machine and how to manipulate it to work as you would like as opposed to how it was designed to work. There are FAQs to continue a backup as opposed to starting fresh, but I wouldn't recommend it for the reasons above. Pondini probably doesn't, either.
If you are going to do a wholesale upgrade of the OS, I would create a bootable clone using something like Carbon Copy Cloner or Super Duper. A bootable clone on an external drive can have you back up and running instantly if the upgrade fails in any way. If the upgrade goes fine, store it away in case you find the current system isn't to your liking.

HT3258 My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?

My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?

You just need to update it to the latest version. See:
http://kb.parallels.com/114449

Iphoto will not update since downloading Yosemite

iPhoto will not update since downloading Yosemite--any help?

Cancel the updates. Delete the apps. Redownload them from the Purchases tab in the App Store.

Since upgrading from Mavericks to Yosemite Mail, Spotlight,Mission Control and App-Store don´t work correctly. Is it possible to return to Mavericks?

Since upgrading from Mavericks to Yosemite Mail, Spotlight, Mission Control and App-Store don´t work correctly. Is it possible to return to Mavericks?

If you have an external drive with an OS X Time Machine backup, then do restore of your last backup. If you have an external drive with a bootable clone of your previous system, you can boot to that clone and re-clone the OS X on your external drive back to your Mac's internal drive.
If you do not have either of these available, then the reverting/restoring process becomes much more complicated and involves purchasing an external drive and backing up your current system to that drive, then erasing, reformatting your hard drive and now your only options to installng an OS X version is doing a clean install of OS X 10.6 Snow Leopard, then upgrading, again, to either OS X 10.7 Lion or 10.8 Mountain Lion. OS X 10.9 Mavericks is no longer available for download and Apple has not made OS X 10.9 Mavericks available in any other form to be able to redownload and install.
Maybe it would be better to explain in detail your issues with Yosemite to see if any of us here can help you with your difficulties.
I am not running or using Yosemite, so I cannot help you with your Yosemite issues,
There are others here who can help you with Yosemite.
Good Luck.

Calendars not updating since getting iphone5

My calendars not updating since getting iphone5
Used to work OK before I upgraded, but I can't see why it's not happening.
Other device is my wifes ipad and iphone

First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

Sound broken since upgrade from 2.6.29

I wasn't sure if I should post this here or in the multimedia forum. Anyway...
I have an Echo Audio Mia-midi soundcard and sound hasn't been working properly for me since upgrading from 2.6.29. Both 2.6.30 and 2.6.31 share the same issue and reverting to 2.6.29 always solves the problem. It seems some driver infrastructure has changed, because the two "Line out" level meters are not available in alsamixer anymore. Instead I have VU-meters for front, rear, center, woofer and side. These can't be set however, and seem to have no impact on the output (they are sometimes set to 100% and sometimes to 0%, but output is silent in both cases).
Running echomixer (an Echo Audio specific mixer in alsa-tools) and playing sound shows that there is sound playing at full volume at the subdevice channels, but the "final" output is silent, even though all output channels are set at their proper values, including the output mixer. Raising the monitor mixer, effectively forwarding the input channels to the output works as it should, so as far as I can tell, the issue concerns the software/driver output to the soundcard.
I've tried everything I can think of to solve this, but nothing seems to help. I've run an alsa debug script in both 2.6.29 and 2.6.31, but the only difference worth noting that I can find is connected to the line out level meters. In 2.6.29:
Simple mixer control 'Line',0
Capabilities: pvolume
Playback channels: Front Left - Front Right - Rear Left - Rear Right
Limits: Playback -128 - 6
Mono:
Front Left: Playback 0 [96%] [0.00dB]
Front Right: Playback 0 [96%] [0.00dB]
Rear Left: Playback 0 [96%] [0.00dB]
Rear Right: Playback 0 [96%] [0.00dB]
state.Mia {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 4
comment.range '-128 - 6'
comment.dbmin -12800
comment.dbmax 600
iface MIXER
name 'Line Playback Volume'
value.0 0
value.1 0
value.2 0
value.3 0
Both of these parts are missing from the output in 2.6.31.
I don't know what to do next. Any help would be greatly appreciated.

I wasn't sure if I should post this here or in the multimedia forum. Anyway...
I have an Echo Audio Mia-midi soundcard and sound hasn't been working properly for me since upgrading from 2.6.29. Both 2.6.30 and 2.6.31 share the same issue and reverting to 2.6.29 always solves the problem. It seems some driver infrastructure has changed, because the two "Line out" level meters are not available in alsamixer anymore. Instead I have VU-meters for front, rear, center, woofer and side. These can't be set however, and seem to have no impact on the output (they are sometimes set to 100% and sometimes to 0%, but output is silent in both cases).
Running echomixer (an Echo Audio specific mixer in alsa-tools) and playing sound shows that there is sound playing at full volume at the subdevice channels, but the "final" output is silent, even though all output channels are set at their proper values, including the output mixer. Raising the monitor mixer, effectively forwarding the input channels to the output works as it should, so as far as I can tell, the issue concerns the software/driver output to the soundcard.
I've tried everything I can think of to solve this, but nothing seems to help. I've run an alsa debug script in both 2.6.29 and 2.6.31, but the only difference worth noting that I can find is connected to the line out level meters. In 2.6.29:
Simple mixer control 'Line',0
Capabilities: pvolume
Playback channels: Front Left - Front Right - Rear Left - Rear Right
Limits: Playback -128 - 6
Mono:
Front Left: Playback 0 [96%] [0.00dB]
Front Right: Playback 0 [96%] [0.00dB]
Rear Left: Playback 0 [96%] [0.00dB]
Rear Right: Playback 0 [96%] [0.00dB]
state.Mia {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 4
comment.range '-128 - 6'
comment.dbmin -12800
comment.dbmax 600
iface MIXER
name 'Line Playback Volume'
value.0 0
value.1 0
value.2 0
value.3 0
Both of these parts are missing from the output in 2.6.31.
I don't know what to do next. Any help would be greatly appreciated.

HT4623 My ipad was not updated since the 5.1 and now when I go to update to IOS 7 it states that my ipad is up to date.

My ipad was not updated since the 5.1 and now when I go to update to IOS 7 it states that my ipad is up to date. Please advise how to update from here.

TheQuestionaire wrote:
My ipad was not updated since the 5.1 ...
Sounds like yours could be an iPad 1.
If so... iOS 5.1.1 is as far as it goes.

HT4623 my 2nd. generation ipod will not update the software from 2.2 to 4

my 2nd. geration ipod will not update the software from 2.2 to 4 or 6.

Are you sure you have a 2G? A 1G can only go to 2.1 via iTunes but a 1G can go as high as 3.1.3 that you get here:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
Identifying iPod models
To If you do have a 2G that can go to 4.2.1 by:
iTunes: Backing up, updating, and restoring iOS software
For 4.2.1 you need iTunes version 10.X and that requires OSX 105.8 or later.
If you have 10.4.11 you can only go to iOS 4.1 since that OSX can on go to iTunes 9.X

HT1338 why can i not update my software from 10.6.8

why can i not update my software from 10.6.8?

Because there are no updates beyond OS X 10.6.8.
If you want to upgrade to a later version, you have to buy it. Mountain Lion is $19.99 US.

File- Export not working after upgrade from 11i to R12

Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
Jagadeesha

Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

Component Status not updating since upgrade from SCCM2012 SP1 CU3 to SCCM2012 R2

Similar Messages

Maybe you are looking for