Component Type

Hi
Where do we find the Valuation type and valuation area in a database table
can any one tel the fieldnames and database table name to find the required fields

Hi Surendra,
You will find Valuation type and Valuation area in Table MBEW.
Hope this will help.
Regards,
Nitin.

Similar Messages

Reading Component Type in ABAP

hi
Given a table name, is it possible to identify its 'Component type' <b>programmatically</b>
for example VBAK has the following Application/Component hierarchy:
SD - Sales and Distribution
       SD-SLS - Sales
             VA - Application development R/3 Sales
                    <b>VBAK</b> - Sales Document: Header Data
So, is it possible to read this hierarchy in an ABAP program?

Hi
From the table description and the Dev class attached to it, and from the fields description we will come to know the component types of that table
all these are stored in different tables with respect to that table
check the tables
TADIR,DD03L, TDEVC etc to get all the above linked things of a table
Reward points for useful Answers
Regards
Anji

Software Component does not support selected Development Component Type...

Hi,
I have a problem, i want create a new project of Mobile Service Component, but, when i want select MyComponents [demo.sap.com], in the top appear:
"Software Component does not support selected Development Component Type. Required DCs are located in an SC that is not visible from the selected SC "
Why?
Thanks in advance,
Regards,

Hi Victor,
the issue is that the archive pool in your NWDS is not set up properly. Could you check the configuration of the development configuration? I guess you are developing in Local Development, right? Please check in the "Component Browser" that the two Software Components "NWMCLIENT" and "XOCA" are present and contain some DCs inside them. If this is not true, than something went wrong with your setup of the IDE. The modifications of the default.confdef are most likely not right.
Please come back to me if you don´t know how to proceed.
Regards,
Stefan

How can i find out field for a particular component type

hi,
how can i find out for particular component name is belongs to this field.....that means REF_DOC_NO componemt is belongs to xblnr field ..../.if we know only component type ...how to find the field...
plz tell me
thanks&regards,
kalyan

keep the cursor on component
press F1
select technical information
you will find the field name and table or structure name
regards
sateesh

How to find what are the support-teams map with particular componant type

hi experts,
i am new in solution manager.. My requirement is when creating the support message in crmd_order t-code i have to give the componant type in transaction data after that in fast entry screen i have to assign support team for that componant type .. here i have to give only valid support team which are map with particular componant type .. when save the support message here i have to check that support team is map with that particular componant type (i.e that support team is belong to that componant type ) .. thats what i have to do in abap development .. so how to find the what are all the support teams mapped with particular componant type .. whether it is stored in any table or ?.. Please give solutions ..
Regards,
Kumar..

Hi Kumaresan-
I'm not sure I fully understand your requirement but I will try to help out. If you are trying to determine / associate the relevant support team according to which component they are responsible for, this might help.
The determination of the support team is maintained by configuring rule 13200137 in transaction PFAC_RESPO.
Click on the Responsibilities Tab
Create your responsibility based on your support team requirements
Assign the appropriate Support Team, this data will be taken from the settings you have maintained when creating your org chart in ppoma_crm
Highlight a responsibility and click Change
In this table you will see an entry for SAP Component, this is where you identify which support team will be determined based on component

What is the different between component and component type in extract struc

Hi All,
What is the different between component and component type in the Extract Structure?
I used them, but I never really know the different between them yet.
Thanks,
Grace

The difference between Component and Component Type are:
Component This is essentially the field name in the extraction structure. These can either be SAP delivered field names or custom field names (e.g. Y* or Z*).
Component Type This defines the data definition for the field, along with associated attrributes and descriptions for anything using that Component Type, to define the corresponding Component. If you double-click on any Component Type in an extraction structure, it will show you the definitions that have been setup for that Component Type (will display as Data Element but it's essentially synonymous - Component Type refers to structures and Data Elements refer to tables).

Find underlying component type

Hi, I have a structure which has few components. Is it possible to find the component type of the components?
Also is it possible to determine whether the component type is a table-type or a structure?

Hi Arun,
You can try out with the help of a join on the tables DD02L and DD03L. In the DD02L, you would be having the tables and it table category (i.e., the type of the component you require INTTAB represents it as a structure and TRANSP represents transparent table.)
For example, if u have an include structure in a table, first hit the DD02L table and know whether it is a table or structure and then hit the table DD03L to know what are the include structures it is having. In this way, you can play around with it.
Please don't forget to reward points if the answer is helpful

Getting error : Expected a child component type of UISelectItem/UISelectIte

Hi,
I am using facelet and third party tool for displaying Grid.
When I am using following code then getting the error :
"Expected a child component type of UISelectItem/UISelectItems for component type javax.faces.SelectOne"
Code:
<ig:column sortBy="phoneNumber">
<f:facet name="header">
<h:outputText value="Phone Number" />
</f:facet>
<h:selectOneMenu value="#{DATA_ROW.phoneNumber}" >
<f:selectItems value="#{mylist.list1}"/>
</h:selectOneMenu>
</ig:column>
Please suggest to resolve the issue.

following is the component tree at which this error is occured:
<HtmlSelectOneMenu disabled="false" id="_ig26" immediate="false" localValueSet="false" readonly="false" rendered="true" required="false" transient="false" valid="true">
<UISelectItems id="_ig27" rendered="true" transient="false"/>
</HtmlSelectOneMenu>

Component type table

dear sir,
in solution manager the component type is stored in dswp_csncomp table while creating the support desk message.. but in R/3 system component type stored it where (which table ) .. please reply..
Regards,
kumar

Hi Kumar,
I hope, that I understand your question correctly.
When creating a support desk message in satellite systems, the proposed component is derived from technical information of the transaction.
The application component is assigned to the package, which is visible on tab "Properties". You can the display the assignment of a transaction as follows:
- execute transaction
- choose System -> Status
- double click on field "Transaction"
- double click on field "Package"
- tab "Properties" shows the assigned Application Component
I don't know the table.
Regards,
Ruediger
Message was edited by: Ruediger Stoecker (Grammar corrected)

Component type in property tree

Hi Experts,
Can you please provide me the details about what is the component type in a property tree of a specification and how can we find which component type is assigned to a specification property tree.
Thanks in Advance
Regards
Kapil

Dear Kapil
you misinterpret the data model of EHS. The "Component type" is just "customizing". This customizing is used in any !! value assignmen type C (composition); We have may be 50 (or more; I do not have counted them) value assignment type of type C in STANDARD tree; so there is no answer to your question possible as component type can be used very often in different contexts
C.B.

Creating component types in N1sps

First, I have created a simple base type called wfbSimpleBase. The contents of which are the following:
<?xml version="1.0" encoding="UTF-8"?>

<component modifier='ABSTRACT' installPath=':[installPath]' xmlns='http://www.sun.com/schema/SPS' name='wfbSimpleBase' version='5.1' description='Wells Fargo Simple Base type' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' author='system' softwareVendor='WellsWare' xsi:schemaLocation='http://www.sun.com/schema/SPS component.xsd'>
     <varList>
          <var name='installName' default=':[sys.name]'></var>
          <var name='installPath' default=':[container:installPath]'></var>
          <var name='installUser' default=''></var>
          <var name='installGroup' default=''></var>
          <var name='installPermissions' default=''></var>
          <var name='installDeployMode' default='REPLACE'></var>
          <var name='installDiffDeploy' default='TRUE'></var>
          <var name='overrideRsrcInstallPath' default=''></var>
     </varList>
     <resourceRef modifier='ABSTRACT'>
          <installSpec deployMode=':[installDeployMode]' permissions=':[installPermissions]' name=':[installName]' user=':[installUser]' diffDeploy=':[installDiffDeploy]' path=':[overrideRsrcInstallPath]' group=':[installGroup]'></installSpec>
     </resourceRef>
     <installList>
          <installSteps name='default'>
               <deployResource></deployResource>
          </installSteps>
          <installSteps name='markOnly'></installSteps>
     </installList>
     <uninstallList>
          <uninstallSteps name='default'>
               <undeployResource></undeployResource>
          </uninstallSteps>
          <uninstallSteps name='markOnly'></uninstallSteps>
     </uninstallList>
     <snapshotList>
          <snapshot name='default'>
               <capture>
                    <addResource></addResource>
               </capture>
          </snapshot>
     </snapshotList>
</component>
This step went smoothly.
Next I tried to extend a new abstract type from it called: wfb_ct. The content of which is the following:
<?xml version="1.0" encoding="UTF-8"?>

<component xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' name='wfb_ct' version='5.1' xsi:schemaLocation='http://www.sun.com/schema/SPS component.xsd' xmlns='http://www.sun.com/schema/SPS' path='/wfbTypes'>
     <extends>
          <type name='system#container'></type>
     </extends>
</component>
When I try to change the name attribute of the type element of the extends to wfbSimpleBase as in the following:
     <extends>
          <type name='wfbSimpleBase'></type>
     </extends>
I get the error:
Unable to check in component
Unable to find component type with name "wfbSimpleBase". (023061)
It does not matter where I move wfbSimpleBase in the folder tree within the N1 repository N1 is simply unable to associate the wfbSimpleBase as the parent type for wfb_ct. When I try to supply a folder path in the name attribute I get a name format error. The only information that I have found in the 5.1 Schema reference that appears to be associated with this is:
<type> Element
The <type> element names the base component type of this component. This element is a child of the <extends>, <componentRefList>, and <componentRef> elements.
The <type> element has one required attribute of type systemName, name, which is the name of the system type component that serves as the base type. If the specified type is one that is defined by a plug-in, pluginName must be prefixed to the type name, such as pluginName#typeName.
This seems to imply that the name attribute of the type element must be a systemName? If this is true how do I get the system to recognize/honor the wfbSimpleBase as a systemName appropriate to extend to a child component?
John Seiberling

Hi,
It is very much possible to plan Non-Stock & stok items & also services in a single work order. Even you can plan stock & non-stock items for a single operation also by providing Item categories L: Stock Item & N: Non- Stock item.
Yatharth

Error(12,61): Parse of component type files failed,

I got this error when i wanted to deploy CreditCardValidation
Error(12,61): Parse of component type files failed, check the adf-config.xml file : "java.lang.reflect.InvocationTargetException"
how i can resolve this.

Make sure CreditCardValidation was created using TP3 update 1. You can't deploy an earlier version.
Heidi.

Error(12,61): Parse of component type files failed, check the adf-config

I got this error when i wanted to deploy CreditCardValidation
Error(12,61): Parse of component type files failed, check the adf-config.xml file : "java.lang.reflect.InvocationTargetException"

I got this error when i wanted to deploy CreditCardValidation
Error(12,61): Parse of component type files failed, check the adf-config.xml file : "java.lang.reflect.InvocationTargetException"

CRM 2007 Upgrade - Component Type is Missing in Structure

Hi,
we found that structure /1CRMG0/CNBCCPSAP005 has empty data type for each of its component types. this causes error each time we try to activate the structure and we can't proceed the upgrade to 2007.
we try to maintain the component type, but we encounter message "Object can only be created in package of namespace /1CRMG0/". even we try to maintain in the suggested package, it prompts error System setting does not allow you to change R3TR TTYP /1CRMG0/CCPSAP005001T. we can't proceed further at this point.
we implemented sap note 0000817539 & 0000643510, but still no success.
any lead is really appreciated
JD

Dear JD,
hopefully you have already solved your problem. If not perhaps the following information is helpful:
These Function Modules are created when the Sbdoc is generated
using the report CND_MAST_GEN_TRANSFER_OBJECTS.
Please check if the Sbdoc is generated correctly in your system or not.
You can check this in transaction SBDM.
The Sbdoc name is CNBCRMPRSAP005.
If the Sbdoc is not created correctly please use the report above to
generate and activate it.
In any case if the problem is solved, please close the thread!
Regards, Gerhard
Moderator

NWDS: can't select dev. component type

Hello Community,
I'm using a NWDI System in Version 7.4 SP9.
I want to develop for my PO System 7.4 SP6, so I selected the NWDI version 7.3-EHP1-SP11-PAT0010.
The NWDI is configured with CMS. It's attached to the SLD of the PO-dev system.
I created a track for my project and created a SC with the wizard and selected "Composite Application 7.40 (with Business Process Management)" from the templates, so the dependencies should be set correctly.
I imported the configuration in my NWDS but I can't select a development component type. No one is active. See attached screenshot:
I want to use Java EE.
How can I fix this?
best regards
Bastian

Hi Bastian,
this is becaus if missing SC imports in CMS webui (Transport Studio).
See more at :
1584553 - Cannot create DC project due to DC types being grayed out in NWDS DC project creation wizard
Best Regards,
Ervin

Theoretical concepts of portal component types

hi all..
can any one send me theoretical concepts of portal component types
regards,
ramn.

Hi ramn,
refer the link..
http://help.sap.com/saphelp_nw04/helpdata/en/d7/fc139ba1549047a5372ad3c0d540ea/frameset.htm
Vikas

Component Type

Similar Messages

Maybe you are looking for