Component WONT work when in Parent Movie
I made a Flash Studio 8 application where a Combo Box
component works perfectly in Movie B. However when I load Movie B
into Movie A (the master movie) it fails to work.
The Component in
the Working Movie (you will need to resize your screen - the
component is hidden on the top of the .swf)
The Master Movie -
(click on Tattoos)
Other components have reacted in a similar manner in other
projects Ive done.
Hi,
this is something I just learned myself: Put a combox in the
library of your Movie A (it is not necessary to put it onto the
stage). Usually it should work after that.
Similar Messages
-
i installed itunes 11.1.3 and now my itunes store wont work - for example the movie list comes up blank- does anyone knw how to fix this?
Looks like blame is incorrectly placed. Turns out my iSCSI connector is struggling with Mavericks. When I placed the iTunes library on a local drive, everything came back to normal.
-
How can i restore my iphone which was erased by iCloud?? I got my phone back but it wont work when i connect to iTunes.
The following assumes you've been backing up to icloud all along.
http://support.apple.com/kb/HT1766?viewlocale=en_US&locale=en_US
Go to Settings>General>Reset and tap Erase All Content and Settings. This will erase your device. Then you will go through the setup screens again as you did when your device was new, and when given the option, select Restore from iCloud Backup.
Let us know if this method does not work. -
The control click and external mouse right click no longer works when copying and pasting album art within itunes. Ex. Hit get info for one song to paste to the rest, copying the artwork wont work when it used to.
Hello there, Teworsham90.
The following Knowledge Base article reviews the process of adding artwork to content in your iTunes Library:
iTunes: How to add artwork to songs and videos in your library
http://support.apple.com/kb/HT1409
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
Code wont work when trying to upload image!
My Code wont work when I try to upload an image to mysql. (Field in mysql is BLOB)
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>insert</title>
<script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
<link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css" />
<?php require_once('Connections/drama_database.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "form1")) {
$insertSQL = sprintf("INSERT INTO databaseimage (name, image) VALUES (%s, %s)",
GetSQLValueString($_POST['name'], "text"),
GetSQLValueString($_POST['image'], "double"));
mysql_select_db($database_drama_database, $drama_database);
$Result1 = mysql_query($insertSQL, $drama_database) or die(mysql_error());
mysql_select_db($database_drama_database, $drama_database);
$query_image = "SELECT * FROM databaseimage";
$image = mysql_query($query_image, $drama_database) or die(mysql_error());
$row_image = mysql_fetch_assoc($image);
$totalRows_image = mysql_num_rows($image);
?>
</head>
<body>
<form action="<?php echo $editFormAction; ?>" method="POST" enctype="multipart/form-data" name="form1" id="form1">
Name: <span id="sprytextfield1">
<label for="name"></label>
<input type="text" name="name" id="name" />
<span class="textfieldRequiredMsg">A value is required.</span></span>
<p>
<label for="image"></label>
<input type="file" name="image" id="image" />
</p>
<p>
<input type="submit" name="Upload" id="Upload" value="Upload" />
</p>
<input type="hidden" name="MM_insert" value="form1" />
</form>
<script type="text/javascript">
var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1");
</script>
</body>
</html>
<?php
mysql_free_result($image);
?>
Any help would be very much appreciated!OK, that tutorial is different than what I assume you want. I suspect you want the ability to have users upload images and store the metadata of those images in a database, correct? That tutorial only shows how to upload to a specific location so the image can
be displayed in an iframe.
Search for "php file upload scripts" to see how to upload to a file system and store the metadata in the database.
>and no, mostly i have used the dreamweaver features to avoid it as much as possible
As you are seeing, DW code is very limited in what it can do. It also generates code that is not up to current standards,and is very difficult to work with if you need to modify it. Basically, it's junk. Forget it and learn how to read and write code. There are tons on tutorials on how to get started with PHP. DW Server behaviors only seem like a time saver in the beginning. In the end, you'll end up wasting more time using them than learning how to code yourself. -
T60 Wont Suspend... and Freq Control Monitor wont work when add to gp.
Hey guys,
I have a lenovo T60, and it cant seem to suspend..
C2D 2.0GHZ
ATI X1400 fglrx propriatary driver 7.11 with no compiz.... (waiting untill 7.13)
2gb DDR2
I saw a thread similar to this, but there was no vga=773 or whatever to my kernel in my menu.lst.
I just want to suspend, and have the ability to control freqs, any suggestions?Hey, i got the new Catalyst 8.1, and suspend works, well, only when i have to manually run " echo -n mem > /sys/power/state" it works, but if i press suspend on my keybord, or go to system>shutdown>suspend it wont work.
But i still cannot get compiz to work, here is some useful info.
compiz --replace
compiz (core) - Fatal: GLX_EXT_texture_from_pixmap is missing
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "xtrap"
Load "record"
Load "GLcore"
Load "dbe"
Load "dri"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility X1400"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "ServerFlags"
Option "AIGLX"
EndSection
glxinfo | grep direct
direct rendering: Yes
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Mobility Radeon X1400
OpenGL version string: 2.1.7276 Release
I Hope this is enough info for you guys!
Last edited by Borat (2008-01-21 19:50:38) -
My ipod wont work when i touch certain spots
when i try to text i cant use numbers because that prt of the screen wont work or to enter my screen works other wise just certain apps and typing how can i fix it??
Make sure the screen si clean and remove any screen protector is y have one.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
QT Pro wont work when updating to Snow Leopard
Both Snow Leopard 10.6.2
On my iMac I have QT and and older version (PRO) and all is fine.
ON my laptop I have QT and and older version (PRO?) and Pro wont work - I Get Message
saying "Can't use this version this (you have QT player 7.0.4)
How do can I get my old pro version working? Can I DL it separately and then key in my regis numbers?
Frankly I prefer Pro over the new SNL version of QT
PS Dont have old instal disk with my laptopCan't use this version this (you have QT player 7.0.4)
The only QT 7 version currently compatible with Snow Leopard is v7.6.3 which is found in the extras package on the Snow Leopard installation disc. (Assuming it was not already installed in your "Utilities" folder if QT 7 Pro was already active on your platform when you installed Snow Leopard.) -
The internet wont work when I use My wrt300n v 1.1
I can connect to the router but the internet wont work but just with the modem it works
Who is your ISP....?
What settings you have done on the router....?
If your Internet Service Provider is Cable follow this link to configure the router.
If your Internet Service Provider is DSL follow this link to configure the router. -
Internet wont work when plugged into charger
my internet stops working when i plug my macbook into the charger. does this make any sense at all???
HI and Welcome to Apple Discussions...
It would help if you told us what type of internet connection you are using. Wireless? Ethernet?
Carolyn -
My hp stream wont work, when I turn it on the cursor is on a black screen, help!
my hp stream wont work. I turned it on and the cursor appears but nothing works. Its fully charged, I've tried turning it off and on but still no luck. Please help
Has it ever worked? Hold volume down (-) while pressing power button. That takes you to BIOS (CMOS setup). Follow the menus for Windows reinstall.
-
Help! My DVD drive wont work when i install iTunes....
I Installed iTunes when i bought my iPod, but my Disc drive wont read any cd's when iTunes is installed. I uninstalled iTunes 4 times now and every time i uninstall iTunes amizingly my disc drive works again.
When iTunes is re-installed it wont read any discs, music cd's movies programs or picture cd's.
Im contemplating returning my iPod for a Zune but i really dont want to have to do that, i love my iPod...
please if anyone can help id really appritiate it...I typed "install itunes, drive won't work" into the search bar in Apple support and found this:
http://support.apple.com/kb/TS2308 -
Can someone please explain to me what I am doing wrong? I
have a Flash file which has a datefield component in it that will
not work. It is in a movieclip that is embedded in the main
timeline.
When I first put in in the movie clip and test it, it works.
Then after a few uses of the movie it does not work. When I click
on it the date chooser that pops up doesn;t work.
What am I doing wrong?Hi,
this is something I just learned myself: Put a combox in the
library of your Movie A (it is not necessary to put it onto the
stage). Usually it should work after that. -
Button no longer works when inside a Movie Clip?
Again I turn to the almighty Adobe forums for help...
So basically, I've had this problem for over a day now, and I've posted on Experts-Exchange.com... to no avail really.
So here we go:
I have a button in a Flash project I've made. It's used to jump to another place on the root timeline, labelled "Why". It used to work perfectly.
I have now placed the button inside a movie clip (it has to be in an animated sequence), but now it no longer works. It appears to work fine, the rollover state works and all. But when clicked it does nothing.
The code I use to work the buttons goes on the main timeline, the code for this button is:
mc_anim_backdrops_menu.btn_subsection1.onRelease = function() {
gotoAndStop("Why");
_global.swfloaded = "";
Why does it no longer work? and what can I do to fix it?
The question is posted here over at Experts Exchange - http://www.experts-exchange.com/Software/Photos_Graphics/Web_Graphics/Macromedia_Flash/Act ionScript/Q_24888850.html
what we've tried there is tracing the problem. The code seems to be pointing to the right place, but none of the actual function works.. as you'll be able to see if you open up the attached file (and change it's extension from .txt to .fla to get it working)
So would someone be able to open it up, have a look and tell me what's wrong? Because I'm stumped. And frustrated.My guess is that you have a scope problem. By putting the button inside a movieclip you have made the buttons scope the same as that clip.
So if you add a trace inside the release event handler, what do you get?
trace("My current scope is: "+this);
I'm guessing it is "_level0.mc_anim_backdrops_menu," right?
So since you are using the global function of gotoAndPlay() it is looking for that label in the current timeline and not finding it.
You should probably use the MovieClip method and specifiy which timeline it should look in.
_root.gotoAndPlay("Why");
_level0.gotoAndPlay("Why")
_parent.gotoAndPlay("Why");
both would probably work. I would never use the first two, other than to make sure that there wasn't something else going on... -
Time Remap expression not working when targeting parent.parent comp.
I created a character rig and I'm trying to set it up so most of the keyframing is done on the main comp instead of the sub comps. Most of the body is set up in the main comp except the head which is in its own sub comp. In this Head_Comp, i have two more sub comps, SideHead_Comp, and FrontHead_Comp. In both of these comp i have the head base, eyes, eyebrows, mouth, etc. The mouth is in its own comp set to time remap from the head comps.
Quick Breakdown:
Body_Comp
> Head Comp
>FrontHead_Comp
>SideHead_Comp
>Mouth_Comp
What I'm trying to do is be able to animate the mouth comp from the main body comp. I've done this with the eyes and eyebrows using dummy objects on the main comp, but when I try to "parent" the time remap of the mouth comp from each of the head comps to a slider in the body comp, nothing happens. The mouth comp will take the current position of the of the slider value and that's it, it won't change if I move the slider around. I'm doing it this way to avoid having a bunch of different copies of the head comps when I'm animating different scenes. I'm not exactly sure what I'm doing wrong.
Here is the expression I used.
a=comp("Diane - AE Rig").layer("Body_CTL").effect("Mouth_Control")("Slider")
framesToTime(a)
I've tried different expressions, but all it does is change to the current value and thats it. It won't move when I move the slider.
Thanks for any help.If one or more of your subcomps doesn't start at time zero as a layer in its parent comp, you have to compensate for that. It's tricky with multiple levels, but basically you end up with something like this:
a=comp("Diane - AE Rig").layer("Body_CTL").effect("Mouth_Control")("Slider")
framesToTime(a.valueAtTime(time + some_offset))
Dan
Maybe you are looking for
-
How do i configure a FOR loop to have the behavior of the step Loop Type: Pass/Fail count?
Hello, I'm using the Pass/Fail count set to one Pass to capture an event generated by my DUT. I originally used a numerical compare step with the Looping type of Pass/Fail count to accomplish this. Unfortunately the implementation changed and now I
-
How do i resolve this pop up when i start batch?
When i click "start batch" this comes up. what do i have to do to get passed this point??
-
Painting / Replacing the texture of an item in a photo - please help
Hi. I've got about 20-30 photos for a pottery distributer. The problem is, they don't have photos of the pottery items in one of the textures they carry. So, in short, I need to know if it's possible to do the following. Replace the color & texture o
-
Can I change Web Gallery "Key Photos"?
In the album overview, I have not been able to figure out how the album chooses the "Key Photo" that represents the album. I haven't experimented fully, but it seems that a Key Photo from an Event made into an album follows to the Web Album, but I ha
-
Can I use a PCI-DIO-96 with HP Vee 5.0
I'm trying to move an HP Vee 5.0 automated test program to a newer-faster-better computer and in to LabVIEW. But for a short time I need to be able to run both programs, to keep up with production during development and to prove the LabVIEW work the